Pagina 1 di 1

ubuntu 11.10 e webcame trust wb1200

Inviato: sabato 22 ottobre 2011, 11:47
da Leviathan
salve, dopo l'aggiornamento tale web came ha smesso di funzionare.

Nel tentativo di reinstallarlo non trovo il pacchetto gpsa con i driver della web came

come si può rimediare?

Re: ubuntu 11.10 e webcame trust wb1200

Inviato: sabato 22 ottobre 2011, 11:53
da magozurlinux
Da terminale colla webcam inserita postami questi comandi:

Codice: Seleziona tutto

lsusb

Codice: Seleziona tutto

dmesg | grep usb

Codice: Seleziona tutto

dmesg | grep gspca

Codice: Seleziona tutto

lsmod

Re: ubuntu 11.10 e webcame trust wb1200

Inviato: sabato 22 ottobre 2011, 12:10
da Leviathan

Codice: Seleziona tutto

 luca@luca-desktop:~$ lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 04a9:1904 Canon, Inc. CanoScan LiDE 100
Bus 001 Device 003: ID 0409:0059 NEC Corp. HighSpeed Hub
Bus 001 Device 008: ID 093a:2468 Pixart Imaging, Inc. SoC PC-Camera
Bus 001 Device 007: ID 192f:0616 Avago Technologies, Pte. 
Bus 001 Device 006: ID 0bda:8189 Realtek Semiconductor Corp. RTL8187B Wireless 802.11g 54Mbps Network Adapter
 

Codice: Seleziona tutto

luca@luca-desktop:~$ dmesg | grep usb
[    0.177638] usbcore: registered new interface driver usbfs
[    0.177647] usbcore: registered new interface driver hub
[    0.177669] usbcore: registered new device driver usb
[    1.584017] usb 1-1: new high speed USB device number 2 using ehci_hcd
[    1.836019] usb 1-2: new high speed USB device number 3 using ehci_hcd
[    2.256053] usb 1-2.1: new full speed USB device number 4 using ehci_hcd
[    2.452181] usb 1-2.2: new low speed USB device number 5 using ehci_hcd
[    2.569802] input: USB Optical Mouse as /devices/pci0000:00/0000:00:02.1/usb1/1-2/1-2.2/1-2.2:1.0/input/input3
[    2.569896] generic-usb 0003:192F:0616.0001: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:02.1-2.2/input0
[    2.569911] usbcore: registered new interface driver usbhid
[    2.569913] usbhid: USB HID core driver
[    2.652190] usb 1-2.3: new high speed USB device number 6 using ehci_hcd
[   19.672187] usb 1-2.3: reset high speed USB device number 6 using ehci_hcd
[   21.800537] usbcore: registered new interface driver ndiswrapper
[   21.823847] input: pac207 as /devices/pci0000:00/0000:00:02.1/usb1/1-2/1-2.1/input/input8
[   21.823968] usbcore: registered new interface driver pac207
[ 1911.754538] usb 1-2.2: USB disconnect, device number 5
[ 1916.576166] usb 1-2.2: new low speed USB device number 7 using ehci_hcd
[ 1916.690707] input: USB Optical Mouse as /devices/pci0000:00/0000:00:02.1/usb1/1-2/1-2.2/1-2.2:1.0/input/input9
[ 1916.690835] generic-usb 0003:192F:0616.0002: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:02.1-2.2/input0
[ 1917.386538] usb 1-2.1: USB disconnect, device number 4
[ 1924.000167] usb 1-2.1: new full speed USB device number 8 using ehci_hcd
[ 1924.113844] input: pac207 as /devices/pci0000:00/0000:00:02.1/usb1/1-2/1-2.1/input/input10
  

Codice: Seleziona tutto

luca@luca-desktop:~$ lsmod
Module                  Size  Used by
bnep                   17923  2 
rfcomm                 38408  0 
bluetooth             148839  10 bnep,rfcomm
binfmt_misc            17292  1 
vesafb                 13489  1 
gspca_pac207           13275  0 
gspca_main             27610  1 gspca_pac207
videodev               85626  1 gspca_main
it87                   29199  0 
hwmon_vid              12658  1 it87
snd_hda_codec_hdmi     31426  4 
nvidia              10390874  38 
snd_hda_codec_realtek   254125  1 
ppdev                  12849  0 
snd_hda_intel          28358  3 
snd_hda_codec          91754  3 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel
snd_hwdep              13276  1 snd_hda_codec
snd_seq_midi           13132  0 
snd_rawmidi            25241  1 snd_seq_midi
snd_pcm                80468  3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec
k8temp                 12905  0 
parport_pc             32114  1 
snd_seq_midi_event     14475  1 snd_seq_midi
asus_atk0110           17742  0 
snd_seq                51567  2 snd_seq_midi,snd_seq_midi_event
snd_timer              28932  2 snd_pcm,snd_seq
snd_seq_device         14172  3 snd_seq_midi,snd_rawmidi,snd_seq
snd                    55902  16 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_rawmidi,snd_pcm,snd_seq,snd_timer,snd_seq_device
soundcore              12600  1 snd
snd_page_alloc         14108  2 snd_hda_intel,snd_pcm
i2c_nforce2            12906  0 
ndiswrapper           193669  0 
lp                     17455  0 
parport                40930  3 ppdev,parport_pc,lp
usbhid                 41905  0 
hid                    77367  1 usbhid
pata_amd               13753  3 
sata_nv                23379  0 
forcedeth              58103  0 
  

Re: ubuntu 11.10 e webcame trust wb1200

Inviato: sabato 22 ottobre 2011, 12:18
da magozurlinux
[ 1924.113844] input: pac207 as /devices/pci0000:00/0000:00:02.1/usb1/1-2/1-2.1/input/input10
gspca_pac207          13275  0
gspca_main            27610  1 gspca_pac207
videodev              85626  1 gspca_main
il modulo driver gspca è stato caricato.

Non hai postato questo comando:

Codice: Seleziona tutto

dmesg | grep gspca
mi serve per vedere se c'è qualcosa che non ha caricato correttamente.

Re: ubuntu 11.10 e webcame trust wb1200

Inviato: sabato 22 ottobre 2011, 12:44
da Leviathan
scusami eccolo:

Codice: Seleziona tutto

luca@luca-desktop:~$ dmesg | grep gspca
[   21.821207] gspca: v2.13.0 registered
luca@luca-desktop:~$ 



Re: ubuntu 11.10 e webcame trust wb1200

Inviato: sabato 22 ottobre 2011, 15:56
da Leviathan
up

Re: ubuntu 11.10 e webcame trust wb1200

Inviato: sabato 22 ottobre 2011, 16:40
da vittoriogubbiotti
La mia webcam è una logitech. Dopo l'esecuzione dei comandi (grazie!) funziona, ma con righe verdi orizzontali in Cheese. Non ho modo al momento di provarla su Skype...

Ecco la sequenza completa:

Codice: Seleziona tutto

vittorio@Aspire-5670:~$ lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 046d:0892 Logitech, Inc. OrbiCam
Bus 002 Device 002: ID 046d:c05a Logitech, Inc. Optical Mouse M90

vittorio@Aspire-5670:~$ dmesg | grep usb
[    0.915281] usbcore: registered new interface driver usbfs
[    0.915281] usbcore: registered new interface driver hub
[    0.915281] usbcore: registered new device driver usb
[    2.116043] usb 1-8: new high speed USB device number 3 using ehci_hcd
[    2.528062] usb 2-1: new low speed USB device number 2 using uhci_hcd
[   21.351991] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input5
[   21.352321] generic-usb 0003:046D:C05A.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-1/input0
[   21.352378] usbcore: registered new interface driver usbhid
[   21.352381] usbhid: USB HID core driver
[   21.984134] usb 1-8: usbfs: USBDEVFS_CONTROL failed cmd mtp-probe rqt 128 rq 6 len 1024 ret -110
[   22.005377] usbcore: registered new interface driver vc032x

vittorio@Aspire-5670:~$ dmesg | grep gspca
[   21.999698] gspca: v2.13.0 registered

vittorio@Aspire-5670:~$ lsmod
Module                  Size  Used by
parport_pc             32114  0 
ppdev                  12849  0 
rfcomm                 38408  0 
bnep                   17923  2 
bluetooth             148839  10 rfcomm,bnep
gspca_vc032x           31999  0 
gspca_main             27610  1 gspca_vc032x
videodev               85626  1 gspca_main
joydev                 17393  0 
acer_wmi               23302  0 
sparse_keymap          13658  1 acer_wmi
usbhid                 41905  0 
pcmcia                 39822  0 
hid                    77367  1 usbhid
snd_hda_codec_realtek   254125  1 
arc4                   12473  2 
snd_hda_intel          24262  1 
snd_hda_codec          91754  2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep              13276  1 snd_hda_codec
dm_multipath           22771  0 
tifm_7xx1              12937  0 
binfmt_misc            17292  1 
radeon                925020  3 
snd_pcm                80468  2 snd_hda_intel,snd_hda_codec
iwl3945                73329  0 
iwl_legacy             71499  1 iwl3945
mac80211              272785  2 iwl3945,iwl_legacy
tifm_core              15040  1 tifm_7xx1
yenta_socket           27428  0 
pcmcia_rsrc            18367  1 yenta_socket
psmouse                73673  0 
ttm                    65224  1 radeon
drm_kms_helper         32889  1 radeon
serio_raw              12990  0 
pcmcia_core            21511  3 pcmcia,yenta_socket,pcmcia_rsrc
snd_seq_midi           13132  0 
drm                   192226  5 radeon,ttm,drm_kms_helper
cfg80211              172392  3 iwl3945,iwl_legacy,mac80211
snd_rawmidi            25241  1 snd_seq_midi
snd_seq_midi_event     14475  1 snd_seq_midi
irda                  185428  0 
snd_seq                51567  2 snd_seq_midi,snd_seq_midi_event
snd_timer              28932  2 snd_pcm,snd_seq
snd_seq_device         14172  3 snd_seq_midi,snd_rawmidi,snd_seq
snd                    55902  11 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
soundcore              12600  1 snd
crc_ccitt              12595  1 irda
i2c_algo_bit           13199  1 radeon
wmi                    18744  1 acer_wmi
snd_page_alloc         14115  2 snd_hda_intel,snd_pcm
lp                     17455  0 
parport                40930  3 parport_pc,ppdev,lp
firewire_ohci          35854  0 
firewire_core          56937  1 firewire_ohci
crc_itu_t              12627  1 firewire_core
tg3                   132972  0 
dm_raid45              76451  0 
xor                    21860  1 dm_raid45
dm_mirror              21822  0 
dm_region_hash         16065  1 dm_mirror
dm_log                 18193  3 dm_raid45,dm_mirror,dm_region_hash

Re: ubuntu 11.10 e webcame trust wb1200

Inviato: sabato 22 ottobre 2011, 18:37
da magozurlinux
@Leviathan

gli output che hai postato vanno bene.

____________________________________________________


@vittoriogubbiotti
[  21.984134] usb 1-8: usbfs: USBDEVFS_CONTROL failed cmd mtp-probe rqt 128 rq 6 len 1024 ret -110
questo output non l'ho mai visto; forse è un bug nel kernel di Ubuntu 11.10.

Gli output per la webcam vanno bene.


__________________________


Da terminale dai questo comando:

Codice: Seleziona tutto

gstreamer-properties


si aprirà una finestra, clicca su Video;

si aprirà un'altra finestra; via in basso su Ingresso predefinito - Video for Linux 2 (V4L2) e clicca su Test;

si aprirà un'altra finestra colla tua immagine; come ti vedi?

Re: ubuntu 11.10 e webcame trust wb1200

Inviato: sabato 22 ottobre 2011, 19:54
da vittoriogubbiotti
magozurlinux ha scritto:

@vittoriogubbiotti

Citazione
[  21.984134] usb 1-8: usbfs: USBDEVFS_CONTROL failed cmd mtp-probe rqt 128 rq 6 len 1024 ret -110

questo output non l'ho mai visto; forse è un bug nel kernel di Ubuntu 11.10.

Gli output per la webcam vanno bene.


__________________________


Da terminale dai questo comando:

Codice:
gstreamer-properties


si aprirà una finestra, clicca su Video;

si aprirà un'altra finestra; via in basso su Ingresso predefinito - Video for Linux 2 (V4L2) e clicca su Test;

si aprirà un'altra finestra colla tua immagine; come ti vedi?
Io vedo molto bene, anche se il sistema fa un po' il seccato. La cosa curiosa è che mi vedo a specchio (immagine invertita).

Se quello è un bug, non va segnalato? E come?

Re: ubuntu 11.10 e webcame trust wb1200

Inviato: sabato 22 ottobre 2011, 20:53
da Leviathan
vanno bene...

quindi come mai skype la vede ma vede nero?
e amsn non la vede proprio?

Re: ubuntu 11.10 e webcame trust wb1200

Inviato: domenica 23 ottobre 2011, 0:09
da Dr_Berta
Come suggerito in diversi forum, prova a digitare il seguente comando per far partire skype:

Codice: Seleziona tutto

LD_PRELOAD=/usr/lib32/libv4l/v4l2convert.so skype
e verifica se la webcam funziona.
Se funziona puoi creare uno script con questo comando ed usarlo per lanciare skype

Ciao

Re: ubuntu 11.10 e webcame trust wb1200

Inviato: domenica 23 ottobre 2011, 0:16
da Dr_Berta
Come suggerito in diversi forum, se non lo hai già testato, prova a digitare il seguente comando per far partire skype:

Codice: Seleziona tutto

LD_PRELOAD=/usr/lib32/libv4l/v4l2convert.so skype
e verifica se la webcam funziona.
Se funziona puoi creare uno script con questo comando ed usarlo per lanciare skype

Ciao

Re: ubuntu 11.10 e webcame trust wb1200

Inviato: domenica 23 ottobre 2011, 11:01
da Leviathan
nel tentativo di rimediare ho cancellato i moduli gpsa come li reinserisco?

Re: ubuntu 11.10 e webcame trust wb1200

Inviato: domenica 23 ottobre 2011, 17:43
da Leviathan
up

Re: ubuntu 11.10 e webcame trust wb1200

Inviato: domenica 23 ottobre 2011, 19:19
da magozurlinux
@Leviathan

Da terminale postami questi comandi:

Codice: Seleziona tutto

grep -e gspca /etc/modprobe.d/blacklist.conf

Codice: Seleziona tutto

locate gspca > gspca.txt
il file gspca.txt lo trovi nella tua cartella home.

Prendi queesto file e l'alleghi in Opzioni aggiuntive, così vedo cos'è successo.
 

Re: ubuntu 11.10 e webcame trust wb1200

Inviato: sabato 16 giugno 2012, 8:48
da vittoriogubbiotti
Ho rifatto la prova (Mint Mate) reinviando i comandi perchè si era bloccata - il rapporto deve esser fragile, come ma? - e la cam è ripartita. Ma in Skype (ultima versione aggiornata oggi, 4.0) la cam continua a non funzionare...

:muro:

Re: ubuntu 11.10 e webcame trust wb1200

Inviato: sabato 16 giugno 2012, 12:02
da magozurlinux
Da terminale postami questi comandi colla webcam inserita:

Codice: Seleziona tutto

uname -r

Codice: Seleziona tutto

locate v4l1compat.so

Codice: Seleziona tutto

locate v4l2compat.so

Codice: Seleziona tutto

dmesg | grep usb

Re: ubuntu 11.10 e webcame trust wb1200

Inviato: sabato 16 giugno 2012, 15:09
da vittoriogubbiotti
Ho provato ma non riesco a copiare l'output. Comunque, funziona, grazie.

Re: ubuntu 11.10 e webcame trust wb1200

Inviato: sabato 16 giugno 2012, 19:10
da magozurlinux
Prego, di nulla.

Devi fare copia e incolla usando i tag code, così l'outpit risulta più leggibile.

:ciao: