Forum Ubuntu-it

Codice: Seleziona tutto

lspci

Codice: Seleziona tutto

dmesg

Codice: Seleziona tutto

00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port (rev 07)
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03)
00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03)
00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 (rev 03)
00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03)
00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 03)
00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03)
00:1d.3 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93)
00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation ICH9M/M-E SATA AHCI Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03)
00:1f.6 Signal processing controller: Intel Corporation 82801I (ICH9 Family) Thermal Subsystem (rev 03)
01:00.0 VGA compatible controller: nVidia Corporation G96 [GeForce 9600M GT] (rev a1)
02:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01)
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)
06:00.0 FireWire (IEEE 1394): JMicron Technology Corp. IEEE 1394 Host Controller
06:00.1 System peripheral: JMicron Technology Corp. SD/MMC Host Controller
06:00.2 SD Host controller: JMicron Technology Corp. Standard SD Host Controller
06:00.3 System peripheral: JMicron Technology Corp. MS Host Controller
06:00.4 System peripheral: JMicron Technology Corp. xD Host Controller

Codice: Seleziona tutto

[    0.512056] pci 0000:00:1e.0: setting latency timer to 64
[    0.512061] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.512064] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.512067] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.512070] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfebfffff]
[    0.512073] pci_bus 0000:01: resource 0 [io  0x9000-0x9fff]
[    0.512076] pci_bus 0000:01: resource 1 [mem 0xd0000000-0xd2ffffff]
[    0.512079] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.512082] pci_bus 0000:02: resource 0 [io  0x8000-0x8fff]
[    0.512084] pci_bus 0000:02: resource 1 [mem 0xde200000-0xdf2fffff]
[    0.512087] pci_bus 0000:02: resource 2 [mem 0xd3000000-0xd3ffffff 64bit pref]
[    0.512090] pci_bus 0000:03: resource 0 [io  0x6000-0x7fff]
[    0.512093] pci_bus 0000:03: resource 1 [mem 0xdd200000-0xde1fffff]
[    0.512096] pci_bus 0000:03: resource 2 [mem 0xd4000000-0xd50fffff 64bit pref]
[    0.512099] pci_bus 0000:04: resource 0 [io  0x5000-0x5fff]
[    0.512101] pci_bus 0000:04: resource 1 [mem 0xdc200000-0xdd1fffff]
[    0.512104] pci_bus 0000:04: resource 2 [mem 0xd5100000-0xd60fffff 64bit pref]
[    0.512107] pci_bus 0000:05: resource 0 [io  0x4000-0x4fff]
[    0.512110] pci_bus 0000:05: resource 1 [mem 0xdb200000-0xdc1fffff]
[    0.512113] pci_bus 0000:05: resource 2 [mem 0xd6100000-0xd70fffff 64bit pref]
[    0.512115] pci_bus 0000:06: resource 0 [io  0x3000-0x3fff]
[    0.512118] pci_bus 0000:06: resource 1 [mem 0xda100000-0xdb1fffff]
[    0.512121] pci_bus 0000:06: resource 2 [mem 0xd7100000-0xd80fffff 64bit pref]
[    0.512124] pci_bus 0000:07: resource 0 [io  0x2000-0x2fff]
[    0.512126] pci_bus 0000:07: resource 1 [mem 0xd9100000-0xda0fffff]
[    0.512129] pci_bus 0000:07: resource 2 [mem 0xd8100000-0xd90fffff 64bit pref]
[    0.512132] pci_bus 0000:0a: resource 4 [io  0x0000-0x0cf7]
[    0.512135] pci_bus 0000:0a: resource 5 [io  0x0d00-0xffff]
[    0.512138] pci_bus 0000:0a: resource 6 [mem 0x000a0000-0x000bffff]
[    0.512140] pci_bus 0000:0a: resource 7 [mem 0xc0000000-0xfebfffff]
[    0.512202] NET: Registered protocol family 2
[    0.512290] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.512584] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.513061] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.513292] TCP: Hash tables configured (established 131072 bind 65536)
[    0.513294] TCP reno registered
[    0.513298] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.513307] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.513403] NET: Registered protocol family 1
[    0.513860] pci 0000:01:00.0: Boot video device
[    0.513932] PCI: CLS 64 bytes, default 64
[    0.513939] Simple Boot Flag value 0x5 read from CMOS RAM was invalid
[    0.513941] Simple Boot Flag at 0x44 set to 0x1
[    0.514303] audit: initializing netlink socket (disabled)
[    0.514313] type=2000 audit(1319528689.508:1): initialized
[    0.544630] highmem bounce pool size: 64 pages
[    0.544636] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.559329] VFS: Disk quotas dquot_6.5.2
[    0.559410] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.560213] fuse init (API version 7.16)
[    0.560320] msgmni has been set to 1641
[    0.560723] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.560753] io scheduler noop registered
[    0.560755] io scheduler deadline registered
[    0.560771] io scheduler cfq registered (default)
[    0.560926] pcieport 0000:00:01.0: setting latency timer to 64
[    0.560967] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    0.561045] pcieport 0000:00:1c.0: setting latency timer to 64
[    0.561098] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[    0.561194] pcieport 0000:00:1c.1: setting latency timer to 64
[    0.561247] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
[    0.561342] pcieport 0000:00:1c.2: setting latency timer to 64
[    0.561395] pcieport 0000:00:1c.2: irq 43 for MSI/MSI-X
[    0.561488] pcieport 0000:00:1c.3: setting latency timer to 64
[    0.561540] pcieport 0000:00:1c.3: irq 44 for MSI/MSI-X
[    0.561638] pcieport 0000:00:1c.4: setting latency timer to 64
[    0.561690] pcieport 0000:00:1c.4: irq 45 for MSI/MSI-X
[    0.561785] pcieport 0000:00:1c.5: setting latency timer to 64
[    0.561837] pcieport 0000:00:1c.5: irq 46 for MSI/MSI-X
[    0.561956] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
[    0.561959] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[    0.561964] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
[    0.561986] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[    0.561989] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[    0.561994] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[    0.562019] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[    0.562021] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[    0.562027] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[    0.562051] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
[    0.562056] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
[    0.562083] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[    0.562088] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[    0.562111] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
[    0.562114] pci 0000:06:00.0: Signaling PME through PCIe PME interrupt
[    0.562116] pci 0000:06:00.1: Signaling PME through PCIe PME interrupt
[    0.562118] pci 0000:06:00.2: Signaling PME through PCIe PME interrupt
[    0.562121] pci 0000:06:00.3: Signaling PME through PCIe PME interrupt
[    0.562123] pci 0000:06:00.4: Signaling PME through PCIe PME interrupt
[    0.562128] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
[    0.562151] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
[    0.562156] pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
[    0.562180] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.562210] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.562283] intel_idle: MWAIT substates: 0x22220
[    0.562285] intel_idle: does not run on family 6 model 15
[    0.562586] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    0.562880] ACPI: AC Adapter [ACAD] (on-line)
[    0.562989] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    0.562995] ACPI: Power Button [PWRB]
[    0.563046] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[    0.563412] ACPI: Lid Switch [LID0]
[    0.563460] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[    0.563464] ACPI: Sleep Button [SLPB]
[    0.563528] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    0.563532] ACPI: Power Button [PWRF]
[    0.563568] ACPI: acpi_idle registered with cpuidle
[    0.563782] Monitor-Mwait will be used to enter C-1 state
[    0.563813] Monitor-Mwait will be used to enter C-2 state
[    0.563821] Marking TSC unstable due to TSC halts in idle
[    0.567665] [Firmware Bug]: Invalid critical threshold (0)
[    0.568204] thermal LNXTHERM:00: registered as thermal_zone0
[    0.568207] ACPI: Thermal Zone [TZ01] (27 C)
[    0.568227] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    0.568258] ERST: Table is not found!
[    0.568306] isapnp: Scanning for PnP cards...
[    0.568340] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.568491] ACPI: Battery Slot [BAT0] (battery absent)
[    0.923659] isapnp: No Plug & Play device found
[    0.929656] Linux agpgart interface v0.103
[    0.931314] brd: module loaded
[    0.931977] loop: module loaded
[    0.932571] Fixed MDIO Bus: probed
[    0.932598] PPP generic driver version 2.4.2
[    0.932636] tun: Universal TUN/TAP device driver, 1.6
[    0.932638] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.932730] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.932749] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    0.932763] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[    0.932768] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    0.932812] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    0.932843] ehci_hcd 0000:00:1a.7: debug port 1
[    0.936741] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[    0.936761] ehci_hcd 0000:00:1a.7: irq 19, io mem 0xdf305c00
[    0.952015] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    0.952139] hub 1-0:1.0: USB hub found
[    0.952144] hub 1-0:1.0: 4 ports detected
[    0.952239] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    0.952252] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    0.952256] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    0.952293] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    0.952321] ehci_hcd 0000:00:1d.7: debug port 1
[    0.956211] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[    0.956229] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xdf305800
[    0.972015] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.972150] hub 2-0:1.0: USB hub found
[    0.972154] hub 2-0:1.0: 8 ports detected
[    0.972251] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.972268] uhci_hcd: USB Universal Host Controller Interface driver
[    0.972291] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.972299] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[    0.972302] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    0.972339] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    0.972377] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000a0e0
[    0.972512] hub 3-0:1.0: USB hub found
[    0.972517] hub 3-0:1.0: 2 ports detected
[    0.972599] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    0.972607] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[    0.972610] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    0.972652] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    0.972689] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000a0c0
[    0.972819] hub 4-0:1.0: USB hub found
[    0.972823] hub 4-0:1.0: 2 ports detected
[    0.972901] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    0.972909] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.972912] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.972949] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[    0.972976] uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000a0a0
[    0.973108] hub 5-0:1.0: USB hub found
[    0.973113] hub 5-0:1.0: 2 ports detected
[    0.973191] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.973198] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.973202] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.973238] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[    0.973265] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000a080
[    0.973402] hub 6-0:1.0: USB hub found
[    0.973406] hub 6-0:1.0: 2 ports detected
[    0.973484] uhci_hcd 0000:00:1d.2: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[    0.973492] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    0.973496] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.973533] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[    0.973560] uhci_hcd 0000:00:1d.2: irq 16, io base 0x0000a060
[    0.973689] hub 7-0:1.0: USB hub found
[    0.973693] hub 7-0:1.0: 2 ports detected
[    0.973768] uhci_hcd 0000:00:1d.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.973775] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    0.973779] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    0.973815] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8
[    0.973854] uhci_hcd 0000:00:1d.3: irq 18, io base 0x0000a040
[    0.973987] hub 8-0:1.0: USB hub found
[    0.973995] hub 8-0:1.0: 2 ports detected
[    0.974133] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
[    0.994946] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.994952] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.995072] mousedev: PS/2 mouse device common for all mice
[    0.996563] rtc_cmos 00:04: RTC can wake from S4
[    0.996671] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    0.996699] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[    0.996782] device-mapper: uevent: version 1.0.3
[    0.996866] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
[    0.996903] EISA: Probing bus 0 at eisa.0
[    0.996906] EISA: Cannot allocate resource for mainboard
[    0.996908] Cannot allocate resource for EISA slot 1
[    0.996910] Cannot allocate resource for EISA slot 2
[    0.996913] Cannot allocate resource for EISA slot 3
[    0.996915] Cannot allocate resource for EISA slot 4
[    0.996917] Cannot allocate resource for EISA slot 5
[    0.996919] Cannot allocate resource for EISA slot 6
[    0.996921] Cannot allocate resource for EISA slot 7
[    0.996923] Cannot allocate resource for EISA slot 8
[    0.996925] EISA: Detected 0 cards.
[    0.996936] cpufreq-nforce2: No nForce2 chipset.
[    0.996988] cpuidle: using governor ladder
[    0.997073] cpuidle: using governor menu
[    0.997075] EFI Variables Facility v0.08 2004-May-17
[    0.997433] TCP cubic registered
[    0.997592] NET: Registered protocol family 10
[    0.998302] NET: Registered protocol family 17
[    0.998318] Registering the dns_resolver key type
[    0.998340] Using IPI No-Shortcut mode
[    0.998425] PM: Hibernation image not present or could not be loaded.
[    0.998436] registered taskstats version 1
[    1.012787]   Magic number: 15:328:724
[    1.012802] block loop4: hash matches
[    1.012891] rtc_cmos 00:04: setting system clock to 2011-10-25 07:44:51 UTC (1319528691)
[    1.013266] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.013268] EDD information not available.
[    1.013503] Freeing unused kernel memory: 720k freed
[    1.013807] Write protecting the kernel text: 5496k
[    1.013892] Write protecting the kernel read-only data: 2232k
[    1.013894] NX-protecting the kernel data: 4744k
[    1.018562] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    1.032745] udevd[84]: starting version 173
[    1.131150] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.131180] r8169 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    1.131226] r8169 0000:03:00.0: setting latency timer to 64
[    1.131296] r8169 0000:03:00.0: irq 47 for MSI/MSI-X
[    1.131908] r8169 0000:03:00.0: eth0: RTL8168c/8111c at 0xf842e000, 00:1e:68:fe:c3:ce, XID 1c2000c0 IRQ 47
[    1.137818] firewire_ohci 0000:06:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.137828] firewire_ohci 0000:06:00.0: setting latency timer to 64
[    1.142071] sdhci: Secure Digital Host Controller Interface driver
[    1.142075] sdhci: Copyright(c) Pierre Ossman
[    1.156937] ahci 0000:00:1f.2: version 3.0
[    1.156953] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.157012] ahci 0000:00:1f.2: irq 48 for MSI/MSI-X
[    1.157029] ahci 0000:00:1f.2: BIOS update required for suspend/resume
[    1.157101] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[    1.157105] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc ems sxs 
[    1.157111] ahci 0000:00:1f.2: setting latency timer to 64
[    1.180943] scsi0 : ahci
[    1.181069] scsi1 : ahci
[    1.181147] scsi2 : ahci
[    1.181229] scsi3 : ahci
[    1.181304] scsi4 : ahci
[    1.181380] scsi5 : ahci
[    1.181574] ata1: SATA max UDMA/133 abar m2048@0xdf305000 port 0xdf305100 irq 48
[    1.181578] ata2: SATA max UDMA/133 abar m2048@0xdf305000 port 0xdf305180 irq 48
[    1.181581] ata3: DUMMY
[    1.181583] ata4: DUMMY
[    1.181586] ata5: SATA max UDMA/133 abar m2048@0xdf305000 port 0xdf305300 irq 48
[    1.181589] ata6: SATA max UDMA/133 abar m2048@0xdf305000 port 0xdf305380 irq 48
[    1.200120] firewire_ohci: Added fw-ohci device 0000:06:00.0, OHCI v1.10, 4 IR + 0 IT contexts, quirks 0x10
[    1.200232] sdhci-pci 0000:06:00.1: SDHCI controller found [197b:2382] (rev 0)
[    1.200253] sdhci-pci 0000:06:00.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.200303] sdhci-pci 0000:06:00.1: setting latency timer to 64
[    1.200313] mmc0: no vmmc regulator found
[    1.200350] Registered led device: mmc0::
[    1.200391] mmc0: SDHCI controller on PCI [0000:06:00.1] using DMA
[    1.200403] sdhci-pci 0000:06:00.2: SDHCI controller found [197b:2381] (rev 0)
[    1.200418] sdhci-pci 0000:06:00.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.200428] sdhci-pci 0000:06:00.2: Refusing to bind to secondary interface.
[    1.200436] sdhci-pci 0000:06:00.2: PCI INT A disabled
[    1.340044] usb 2-4: new high speed USB device number 3 using ehci_hcd
[    1.500037] ata6: SATA link down (SStatus 0 SControl 300)
[    1.504070] ata5: SATA link down (SStatus 0 SControl 300)
[    1.608037] usb 2-8: new high speed USB device number 4 using ehci_hcd
[    1.680026] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.680045] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.680946] ata1.00: ATA-8: Hitachi HTS543225L9A300, FBEOC44C, max UDMA/100
[    1.680952] ata1.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    1.682050] ata1.00: configured for UDMA/100
[    1.682192] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54322 FBEO PQ: 0 ANSI: 5
[    1.682376] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.682380] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[    1.682432] sd 0:0:0:0: [sda] Write Protect is off
[    1.682439] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.682470] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.683599] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-T50L, SC04, max UDMA/100
[    1.688431] ata2.00: configured for UDMA/100
[    1.700113] firewire_core: created device fw0: GUID 00241b00c2cc3c01, S400
[    1.721909]  sda: sda1 sda2 < sda5 >
[    1.722195] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.801657] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-T50L  SC04 PQ: 0 ANSI: 5
[    1.911778] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.911782] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.911911] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.911980] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    1.984031] usb 5-1: new low speed USB device number 2 using uhci_hcd
[    2.196562] input: Microsoft  Compact Optical Mouse 500 as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/input/input5
[    2.196684] generic-usb 0003:045E:0737.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft  Compact Optical Mouse 500] on usb-0000:00:1d.0-1/input0
[    2.196701] usbcore: registered new interface driver usbhid
[    2.196703] usbhid: USB HID core driver
[    2.277497] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[   15.416069] udevd[342]: starting version 173
[   15.451206] lp: driver loaded but no devices found
[   15.556944] Adding 4190204k swap on /dev/sda5.  Priority:-1 extents:1 across:4190204k 
[   15.657142] hp_accel: hardware type HPDV5_I found
[   15.668228] lis3lv02d: 8 bits sensor found
[   15.679574] acpi device:08: registered as cooling_device2
[   15.679716] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:06/LNXVIDEO:01/input/input6
[   15.680663] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[   15.718739] ene_ir: chip is 0x3926 - kbver = 0x00, rev = 0xc0
[   15.718743] ene_ir: PLL freq = 1406
[   15.718745] ene_ir: KB3926C detected
[   15.718758] ene_ir: Firmware regs: 00 00
[   15.718760] ene_ir: Hardware features:
[   15.718762] ene_ir: * Uses GPIO 40 for IR demodulated input
[   15.728458] IR NEC protocol handler initialized
[   15.732105] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   15.733670] IR RC5(x) protocol handler initialized
[   15.734818] lib80211: common routines for IEEE802.11 drivers
[   15.734821] lib80211_crypt: registered algorithm 'NULL'
[   15.743888] nvidia: module license 'NVIDIA' taints kernel.
[   15.743892] Disabling lock debugging due to kernel taint
[   15.746976] IR RC6 protocol handler initialized
[   15.753830] Registered IR keymap rc-rc6-mce
[   15.753951] input: ENE eHome Infrared Remote Receiver as /devices/virtual/rc/rc0/input7
[   15.754068] rc0: ENE eHome Infrared Remote Receiver as /devices/virtual/rc/rc0
[   15.756373] ene_ir: driver has been successfully loaded
[   15.769363] IR JVC protocol handler initialized
[   15.773697] wl 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   15.773712] wl 0000:02:00.0: setting latency timer to 64
[   15.784659] IR Sony protocol handler initialized
[   15.801561] lirc_dev: IR Remote Control driver registered, major 249 
[   15.802025] rc rc0: lirc_dev: driver ir-lirc-codec (ene_ir) registered at minor = 0
[   15.802028] IR LIRC bridge handler initialized
[   15.833105] lib80211_crypt: registered algorithm 'TKIP'
[   16.091364] type=1400 audit(1319528706.572:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=626 comm="apparmor_parser"
[   16.091823] type=1400 audit(1319528706.572:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=626 comm="apparmor_parser"
[   16.092132] type=1400 audit(1319528706.576:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=626 comm="apparmor_parser"
[   16.095821] type=1400 audit(1319528706.576:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=692 comm="apparmor_parser"
[   16.099579] type=1400 audit(1319528706.580:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=692 comm="apparmor_parser"
[   16.099875] type=1400 audit(1319528706.580:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=692 comm="apparmor_parser"
[   16.278105] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input8
[   16.278341] Registered led device: hp::hddprotect
[   16.278467] hp_accel: driver loaded
[   16.279293] wmi: Mapper loaded
[   16.318151] input: HP WMI hotkeys as /devices/virtual/input/input9
[   16.331326] jmb38x_ms 0000:06:00.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   16.331335] jmb38x_ms 0000:06:00.3: setting latency timer to 64
[   16.367224] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   16.367287] HDA Intel 0000:00:1b.0: irq 49 for MSI/MSI-X
[   16.367320] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   16.396566] Linux video capture interface: v2.00
[   16.397828] uvcvideo: Found UVC 1.00 device HP Webcam (0408:03ba)
[   16.409789] input: HP Webcam as /devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4:1.0/input/input10
[   16.409973] usbcore: registered new interface driver uvcvideo
[   16.409975] USB Video Class driver (v1.1.0)
[   16.436433] input: HDA Intel Mic at Sep UNKNOWN Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   16.436530] input: HDA Intel Mic at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   16.436604] input: HDA Intel HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[   16.554334] eth1: Broadcom BCM4315 802.11 Hybrid Wireless Controller 5.100.82.38
[   16.600432] nvidia 0000:01:00.0: power state changed by ACPI to D0
[   16.600445] nvidia 0000:01:00.0: power state changed by ACPI to D0
[   16.600468] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   16.600491] nvidia 0000:01:00.0: setting latency timer to 64
[   16.600504] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[   16.601093] NVRM: loading NVIDIA UNIX x86 Kernel Module  173.14.30  Thu Apr 14 08:47:14 PDT 2011
[   16.725812] type=1400 audit(1319528707.212:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session-wrapper" pid=963 comm="apparmor_parser"
[   16.728680] type=1400 audit(1319528707.212:9): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=964 comm="apparmor_parser"
[   16.737592] type=1400 audit(1319528707.224:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=964 comm="apparmor_parser"
[   16.737947] type=1400 audit(1319528707.224:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=964 comm="apparmor_parser"
[   16.856351] Synaptics Touchpad, model: 1, fw: 6.5, id: 0x1c0b1, caps: 0xa04751/0xa00000/0x0
[   16.929007] r8169 0000:03:00.0: eth0: link down
[   16.931226] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   16.944422] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input14
[   17.007632] init: failsafe main process (907) killed by TERM signal
[   17.012766] init: apport pre-start process (1019) terminated with status 1
[   17.032114] init: apport post-stop process (1056) terminated with status 1
[   17.074154] dvb-usb: found a 'AVerMedia A309' in cold state, will try to load a firmware
[   17.143145] dvb-usb: downloading firmware from file 'dvb-usb-af9015.fw'
[   17.212289] dvb-usb: found a 'AVerMedia A309' in warm state.
[   17.212350] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[   17.212692] DVB: registering new adapter (AVerMedia A309)
[   17.217904] af9013: firmware version:4.95.0.0
[   17.221654] DVB: registering adapter 0 frontend 0 (Afatech AF9013 DVB-T)...
[   17.223955] MXL5005S: Attached at address 0xc6
[   17.223960] dvb-usb: AVerMedia A309 successfully initialized and connected.
[   17.230432] usbcore: registered new interface driver dvb_usb_af9015
[   17.297496] vesafb: mode is 640x480x32, linelength=2560, pages=0
[   17.297499] vesafb: scrolling: redraw
[   17.297502] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[   17.298368] vesafb: framebuffer at 0xd1000000, mapped to 0xf9000000, using 1216k, total 1216k
[   17.298540] Console: switching to colour frame buffer device 80x30
[   17.298555] fb0: VESA VGA frame buffer device
[   17.351282] ppdev: user-space parallel port driver
[   17.553623] vboxdrv: Found 2 processor cores.
[   17.553751] vboxdrv: fAsync=0 offMin=0x1fe offMax=0x8a2
[   17.553818] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[   17.553820] vboxdrv: Successfully loaded version 4.1.2_Ubuntu (interface 0x00190000).
[   17.573073] vboxpci: IOMMU not found (not registered)
[   17.600032] Bluetooth: Core ver 2.16
[   17.600058] NET: Registered protocol family 31
[   17.600060] Bluetooth: HCI device and connection manager initialized
[   17.600062] Bluetooth: HCI socket layer initialized
[   17.600064] Bluetooth: L2CAP socket layer initialized
[   17.600547] Bluetooth: SCO socket layer initialized
[   17.603255] Bluetooth: RFCOMM TTY layer initialized
[   17.603260] Bluetooth: RFCOMM socket layer initialized
[   17.603263] Bluetooth: RFCOMM ver 1.11
[   17.635482] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   17.635486] Bluetooth: BNEP filters: protocol multicast
[   22.520192] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[   24.525115] init: plymouth-upstart-bridge main process (940) killed by TERM signal
[   25.971561] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[   27.896032] eth1: no IPv6 routers present
[   49.488019] eth1: no IPv6 routers present
[  257.292038] irq_handler: 30 callbacks suppressed
[  257.292042] firewire_ohci: isochronous cycle inconsistent
[  257.884550] firewire_core: created device fw1: GUID 080046010415059e, S100
[  257.884565] firewire_core: phy config: card 0, new root=ffc1, gap_count=5
[  257.886669] firewire_core: IRM is not 1394a compliant, making local node (ffc0) root.
[  257.886680] firewire_core: phy config: card 0, new root=ffc0, gap_count=5

Codice: Seleziona tutto

cat /etc/modules

Codice: Seleziona tutto

sudo gedit /etc/udev/rules.d/40-permissions.rules

Codice: Seleziona tutto

# IEEE1394 (firewire) devices
# Please note that raw1394 gives unrestricted, raw access to every single
# device on the bus and those devices may do anything as root on your system.
# Yes, I know it also happens to be the only way to rewind your video camera,
# but it's not going to be group "video", okay?
KERNEL=="raw1394", MODE="0666", GROUP="disk"
KERNEL=="dv1394*", MODE="0666", GROUP="video"
KERNEL=="video1394*", MODE="0666", GROUP="video"

Codice: Seleziona tutto

# /etc/modules: kernel modules to load at boot time.
#
# This file contains the names of kernel modules that should be loaded
# at boot time, one per line. Lines beginning with "#" are ignored.

lp

ieee1394
dv1394
video1394
raw1394
gianni@gianni-HP-Pavilion-dv5-Notebook-PC:~$ 

Codice: Seleziona tutto

cat /etc/udev/rules.d/40-permissions.rules

Codice: Seleziona tutto

# IEEE1394 (firewire) devices
# Please note that raw1394 gives unrestricted, raw access to every single
# device on the bus and those devices may do anything as root on your system.
# Yes, I know it also happens to be the only way to rewind your video camera,
# but it's not going to be group "video", okay?
KERNEL=="raw1394", MODE="0666", GROUP="disk"
KERNEL=="dv1394*", MODE="0666", GROUP="video"
KERNEL=="video1394*", MODE="0666", GROUP="video"

Codice: Seleziona tutto

dmesg

Codice: Seleziona tutto

[    0.513386] pci_bus 0000:01: resource 1 [mem 0xd0000000-0xd2ffffff]
[    0.513389] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.513392] pci_bus 0000:02: resource 0 [io  0x8000-0x8fff]
[    0.513394] pci_bus 0000:02: resource 1 [mem 0xde200000-0xdf2fffff]
[    0.513397] pci_bus 0000:02: resource 2 [mem 0xd3000000-0xd3ffffff 64bit pref]
[    0.513400] pci_bus 0000:03: resource 0 [io  0x6000-0x7fff]
[    0.513403] pci_bus 0000:03: resource 1 [mem 0xdd200000-0xde1fffff]
[    0.513406] pci_bus 0000:03: resource 2 [mem 0xd4000000-0xd50fffff 64bit pref]
[    0.513409] pci_bus 0000:04: resource 0 [io  0x5000-0x5fff]
[    0.513411] pci_bus 0000:04: resource 1 [mem 0xdc200000-0xdd1fffff]
[    0.513414] pci_bus 0000:04: resource 2 [mem 0xd5100000-0xd60fffff 64bit pref]
[    0.513417] pci_bus 0000:05: resource 0 [io  0x4000-0x4fff]
[    0.513420] pci_bus 0000:05: resource 1 [mem 0xdb200000-0xdc1fffff]
[    0.513423] pci_bus 0000:05: resource 2 [mem 0xd6100000-0xd70fffff 64bit pref]
[    0.513425] pci_bus 0000:06: resource 0 [io  0x3000-0x3fff]
[    0.513428] pci_bus 0000:06: resource 1 [mem 0xda100000-0xdb1fffff]
[    0.513431] pci_bus 0000:06: resource 2 [mem 0xd7100000-0xd80fffff 64bit pref]
[    0.513434] pci_bus 0000:07: resource 0 [io  0x2000-0x2fff]
[    0.513436] pci_bus 0000:07: resource 1 [mem 0xd9100000-0xda0fffff]
[    0.513439] pci_bus 0000:07: resource 2 [mem 0xd8100000-0xd90fffff 64bit pref]
[    0.513442] pci_bus 0000:0a: resource 4 [io  0x0000-0x0cf7]
[    0.513445] pci_bus 0000:0a: resource 5 [io  0x0d00-0xffff]
[    0.513448] pci_bus 0000:0a: resource 6 [mem 0x000a0000-0x000bffff]
[    0.513451] pci_bus 0000:0a: resource 7 [mem 0xc0000000-0xfebfffff]
[    0.513502] NET: Registered protocol family 2
[    0.513588] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.513874] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.514340] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.514567] TCP: Hash tables configured (established 131072 bind 65536)
[    0.514569] TCP reno registered
[    0.514573] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.514580] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.514677] NET: Registered protocol family 1
[    0.515129] pci 0000:01:00.0: Boot video device
[    0.515200] PCI: CLS 64 bytes, default 64
[    0.515207] Simple Boot Flag value 0x5 read from CMOS RAM was invalid
[    0.515209] Simple Boot Flag at 0x44 set to 0x1
[    0.515570] audit: initializing netlink socket (disabled)
[    0.515580] type=2000 audit(1319533464.508:1): initialized
[    0.545900] highmem bounce pool size: 64 pages
[    0.545906] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.560607] VFS: Disk quotas dquot_6.5.2
[    0.560688] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.561481] fuse init (API version 7.16)
[    0.561588] msgmni has been set to 1641
[    0.561997] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.562028] io scheduler noop registered
[    0.562030] io scheduler deadline registered
[    0.562046] io scheduler cfq registered (default)
[    0.562200] pcieport 0000:00:01.0: setting latency timer to 64
[    0.562240] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    0.562319] pcieport 0000:00:1c.0: setting latency timer to 64
[    0.562371] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[    0.562470] pcieport 0000:00:1c.1: setting latency timer to 64
[    0.562522] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
[    0.562617] pcieport 0000:00:1c.2: setting latency timer to 64
[    0.562669] pcieport 0000:00:1c.2: irq 43 for MSI/MSI-X
[    0.562764] pcieport 0000:00:1c.3: setting latency timer to 64
[    0.562815] pcieport 0000:00:1c.3: irq 44 for MSI/MSI-X
[    0.562914] pcieport 0000:00:1c.4: setting latency timer to 64
[    0.562966] pcieport 0000:00:1c.4: irq 45 for MSI/MSI-X
[    0.563061] pcieport 0000:00:1c.5: setting latency timer to 64
[    0.563113] pcieport 0000:00:1c.5: irq 46 for MSI/MSI-X
[    0.563233] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
[    0.563236] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[    0.563241] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
[    0.563264] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[    0.563266] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[    0.563271] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[    0.563296] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[    0.563298] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[    0.563304] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[    0.563328] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
[    0.563333] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
[    0.563357] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[    0.563363] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[    0.563386] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
[    0.563388] pci 0000:06:00.0: Signaling PME through PCIe PME interrupt
[    0.563391] pci 0000:06:00.1: Signaling PME through PCIe PME interrupt
[    0.563393] pci 0000:06:00.2: Signaling PME through PCIe PME interrupt
[    0.563395] pci 0000:06:00.3: Signaling PME through PCIe PME interrupt
[    0.563398] pci 0000:06:00.4: Signaling PME through PCIe PME interrupt
[    0.563403] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
[    0.563427] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
[    0.563433] pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
[    0.563456] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.563486] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.563559] intel_idle: MWAIT substates: 0x22220
[    0.563561] intel_idle: does not run on family 6 model 15
[    0.563861] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    0.564164] ACPI: AC Adapter [ACAD] (on-line)
[    0.564273] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    0.564279] ACPI: Power Button [PWRB]
[    0.564330] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[    0.564718] ACPI: Lid Switch [LID0]
[    0.564766] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[    0.564770] ACPI: Sleep Button [SLPB]
[    0.564834] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    0.564838] ACPI: Power Button [PWRF]
[    0.564875] ACPI: acpi_idle registered with cpuidle
[    0.565045] Monitor-Mwait will be used to enter C-1 state
[    0.565078] Monitor-Mwait will be used to enter C-2 state
[    0.565086] Marking TSC unstable due to TSC halts in idle
[    0.568976] [Firmware Bug]: Invalid critical threshold (0)
[    0.569517] thermal LNXTHERM:00: registered as thermal_zone0
[    0.569520] ACPI: Thermal Zone [TZ01] (49 C)
[    0.569539] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    0.569570] ERST: Table is not found!
[    0.569617] isapnp: Scanning for PnP cards...
[    0.569798] ACPI: Battery Slot [BAT0] (battery absent)
[    0.612081] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.924944] isapnp: No Plug & Play device found
[    0.933668] Linux agpgart interface v0.103
[    0.935326] brd: module loaded
[    0.935987] loop: module loaded
[    0.936581] Fixed MDIO Bus: probed
[    0.936608] PPP generic driver version 2.4.2
[    0.936647] tun: Universal TUN/TAP device driver, 1.6
[    0.936649] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.936748] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.936767] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    0.936784] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[    0.936788] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    0.936829] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    0.936860] ehci_hcd 0000:00:1a.7: debug port 1
[    0.940748] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[    0.940767] ehci_hcd 0000:00:1a.7: irq 19, io mem 0xdf305c00
[    0.956015] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    0.956139] hub 1-0:1.0: USB hub found
[    0.956144] hub 1-0:1.0: 4 ports detected
[    0.956236] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    0.956251] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    0.956255] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    0.956296] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    0.956325] ehci_hcd 0000:00:1d.7: debug port 1
[    0.960219] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[    0.960235] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xdf305800
[    0.976016] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.976129] hub 2-0:1.0: USB hub found
[    0.976133] hub 2-0:1.0: 8 ports detected
[    0.976231] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.976248] uhci_hcd: USB Universal Host Controller Interface driver
[    0.976270] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.976278] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[    0.976282] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    0.976318] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    0.976356] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000a0e0
[    0.976487] hub 3-0:1.0: USB hub found
[    0.976491] hub 3-0:1.0: 2 ports detected
[    0.976576] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    0.976584] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[    0.976588] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    0.976624] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    0.976663] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000a0c0
[    0.976795] hub 4-0:1.0: USB hub found
[    0.976799] hub 4-0:1.0: 2 ports detected
[    0.976877] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    0.976885] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.976889] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.976929] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[    0.976956] uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000a0a0
[    0.977086] hub 5-0:1.0: USB hub found
[    0.977090] hub 5-0:1.0: 2 ports detected
[    0.977167] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.977174] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.977178] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.977214] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[    0.977241] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000a080
[    0.977375] hub 6-0:1.0: USB hub found
[    0.977379] hub 6-0:1.0: 2 ports detected
[    0.977457] uhci_hcd 0000:00:1d.2: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[    0.977464] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    0.977468] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.977504] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[    0.977531] uhci_hcd 0000:00:1d.2: irq 16, io base 0x0000a060
[    0.977667] hub 7-0:1.0: USB hub found
[    0.977671] hub 7-0:1.0: 2 ports detected
[    0.977746] uhci_hcd 0000:00:1d.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.977753] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    0.977757] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    0.977796] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8
[    0.977833] uhci_hcd 0000:00:1d.3: irq 18, io base 0x0000a040
[    0.977962] hub 8-0:1.0: USB hub found
[    0.977967] hub 8-0:1.0: 2 ports detected
[    0.978109] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
[    1.000012] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.000019] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.000141] mousedev: PS/2 mouse device common for all mice
[    1.001467] rtc_cmos 00:04: RTC can wake from S4
[    1.001576] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    1.001604] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[    1.001688] device-mapper: uevent: version 1.0.3
[    1.001770] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
[    1.001808] EISA: Probing bus 0 at eisa.0
[    1.001811] EISA: Cannot allocate resource for mainboard
[    1.001813] Cannot allocate resource for EISA slot 1
[    1.001816] Cannot allocate resource for EISA slot 2
[    1.001818] Cannot allocate resource for EISA slot 3
[    1.001820] Cannot allocate resource for EISA slot 4
[    1.001822] Cannot allocate resource for EISA slot 5
[    1.001824] Cannot allocate resource for EISA slot 6
[    1.001827] Cannot allocate resource for EISA slot 7
[    1.001829] Cannot allocate resource for EISA slot 8
[    1.001831] EISA: Detected 0 cards.
[    1.001842] cpufreq-nforce2: No nForce2 chipset.
[    1.001896] cpuidle: using governor ladder
[    1.001983] cpuidle: using governor menu
[    1.001985] EFI Variables Facility v0.08 2004-May-17
[    1.002336] TCP cubic registered
[    1.002493] NET: Registered protocol family 10
[    1.003194] NET: Registered protocol family 17
[    1.003209] Registering the dns_resolver key type
[    1.003234] Using IPI No-Shortcut mode
[    1.003322] PM: Hibernation image not present or could not be loaded.
[    1.003334] registered taskstats version 1
[    1.017666]   Magic number: 15:369:71
[    1.017760] rtc_cmos 00:04: setting system clock to 2011-10-25 09:04:25 UTC (1319533465)
[    1.018120] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.018123] EDD information not available.
[    1.018323] Freeing unused kernel memory: 720k freed
[    1.018603] Write protecting the kernel text: 5496k
[    1.018680] Write protecting the kernel read-only data: 2232k
[    1.018681] NX-protecting the kernel data: 4744k
[    1.023772] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    1.038955] udevd[84]: starting version 173
[    1.099894] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.099923] r8169 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    1.099968] r8169 0000:03:00.0: setting latency timer to 64
[    1.101837] sdhci: Secure Digital Host Controller Interface driver
[    1.101840] sdhci: Copyright(c) Pierre Ossman
[    1.102095] sdhci-pci 0000:06:00.1: SDHCI controller found [197b:2382] (rev 0)
[    1.102114] sdhci-pci 0000:06:00.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.102158] sdhci-pci 0000:06:00.1: setting latency timer to 64
[    1.102170] mmc0: no vmmc regulator found
[    1.102204] Registered led device: mmc0::
[    1.102246] mmc0: SDHCI controller on PCI [0000:06:00.1] using DMA
[    1.102256] sdhci-pci 0000:06:00.2: SDHCI controller found [197b:2381] (rev 0)
[    1.102271] sdhci-pci 0000:06:00.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.102278] sdhci-pci 0000:06:00.2: Refusing to bind to secondary interface.
[    1.102286] sdhci-pci 0000:06:00.2: PCI INT A disabled
[    1.107056] r8169 0000:03:00.0: irq 47 for MSI/MSI-X
[    1.107696] r8169 0000:03:00.0: eth0: RTL8168c/8111c at 0xf842e000, 00:1e:68:fe:c3:ce, XID 1c2000c0 IRQ 47
[    1.107926] ahci 0000:00:1f.2: version 3.0
[    1.107943] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.108016] ahci 0000:00:1f.2: irq 48 for MSI/MSI-X
[    1.108036] ahci 0000:00:1f.2: BIOS update required for suspend/resume
[    1.112777] firewire_ohci 0000:06:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.112787] firewire_ohci 0000:06:00.0: setting latency timer to 64
[    1.126823] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[    1.126828] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc ems sxs 
[    1.126835] ahci 0000:00:1f.2: setting latency timer to 64
[    1.151071] scsi0 : ahci
[    1.153523] scsi1 : ahci
[    1.153987] scsi2 : ahci
[    1.156961] scsi3 : ahci
[    1.159175] scsi4 : ahci
[    1.161542] scsi5 : ahci
[    1.161757] ata1: SATA max UDMA/133 abar m2048@0xdf305000 port 0xdf305100 irq 48
[    1.161762] ata2: SATA max UDMA/133 abar m2048@0xdf305000 port 0xdf305180 irq 48
[    1.161764] ata3: DUMMY
[    1.161766] ata4: DUMMY
[    1.161769] ata5: SATA max UDMA/133 abar m2048@0xdf305000 port 0xdf305300 irq 48
[    1.161773] ata6: SATA max UDMA/133 abar m2048@0xdf305000 port 0xdf305380 irq 48
[    1.176153] firewire_ohci: Added fw-ohci device 0000:06:00.0, OHCI v1.10, 4 IR + 0 IT contexts, quirks 0x10
[    1.344025] usb 2-4: new high speed USB device number 3 using ehci_hcd
[    1.488032] ata5: SATA link down (SStatus 0 SControl 300)
[    1.488057] ata6: SATA link down (SStatus 0 SControl 300)
[    1.608037] usb 2-8: new high speed USB device number 4 using ehci_hcd
[    1.652051] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.652942] ata1.00: ATA-8: Hitachi HTS543225L9A300, FBEOC44C, max UDMA/100
[    1.652946] ata1.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    1.654005] ata1.00: configured for UDMA/100
[    1.654166] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54322 FBEO PQ: 0 ANSI: 5
[    1.654305] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[    1.654346] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.654358] sd 0:0:0:0: [sda] Write Protect is off
[    1.654361] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.654385] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.656043] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.659871] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-T50L, SC04, max UDMA/100
[    1.664749] ata2.00: configured for UDMA/100
[    1.676099] firewire_core: created device fw0: GUID 00241b00c2cc3c01, S400
[    1.698021]  sda: sda1 sda2 < sda5 >
[    1.698310] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.781391] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-T50L  SC04 PQ: 0 ANSI: 5
[    1.891485] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.891491] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.891642] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.891721] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    1.988030] usb 5-1: new low speed USB device number 2 using uhci_hcd
[    2.196565] input: Microsoft  Compact Optical Mouse 500 as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/input/input5
[    2.196693] generic-usb 0003:045E:0737.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft  Compact Optical Mouse 500] on usb-0000:00:1d.0-1/input0
[    2.196713] usbcore: registered new interface driver usbhid
[    2.196715] usbhid: USB HID core driver
[    2.231258] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[   15.090600] udevd[345]: starting version 173
[   15.138497] lp: driver loaded but no devices found
[   15.222235] Adding 4190204k swap on /dev/sda5.  Priority:-1 extents:1 across:4190204k 
[   15.290052] lib80211: common routines for IEEE802.11 drivers
[   15.291717] lib80211_crypt: registered algorithm 'NULL'
[   15.323571] wl: module license 'MIXED/Proprietary' taints kernel.
[   15.323576] Disabling lock debugging due to kernel taint
[   15.336622] jmb38x_ms 0000:06:00.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   15.336632] jmb38x_ms 0000:06:00.3: setting latency timer to 64
[   15.349403] hp_accel: hardware type HPDV5_I found
[   15.350034] wl 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   15.350049] wl 0000:02:00.0: setting latency timer to 64
[   15.360211] lis3lv02d: 8 bits sensor found
[   15.376711] lib80211_crypt: registered algorithm 'TKIP'
[   15.443708] acpi device:08: registered as cooling_device2
[   15.443795] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:06/LNXVIDEO:01/input/input6
[   15.443855] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[   15.499424] ene_ir: chip is 0x3926 - kbver = 0x00, rev = 0xc0
[   15.499427] ene_ir: PLL freq = 1406
[   15.499429] ene_ir: KB3926C detected
[   15.499443] ene_ir: Firmware regs: c0 00
[   15.499444] ene_ir: Hardware features:
[   15.499446] ene_ir: * Uses GPIO 40 for IR demodulated input
[   15.560085] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input7
[   15.560229] Registered led device: hp::hddprotect
[   15.560249] hp_accel: driver loaded
[   15.560508] wmi: Mapper loaded
[   15.580359] eth1: Broadcom BCM4315 802.11 Hybrid Wireless Controller 5.100.82.38
[   15.593417] IR NEC protocol handler initialized
[   15.613729] type=1400 audit(1319533480.090:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=644 comm="apparmor_parser"
[   15.614189] type=1400 audit(1319533480.090:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=644 comm="apparmor_parser"
[   15.614478] type=1400 audit(1319533480.090:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=644 comm="apparmor_parser"
[   15.616023] Registered IR keymap rc-rc6-mce
[   15.616225] input: ENE eHome Infrared Remote Receiver as /devices/virtual/rc/rc0/input8
[   15.616359] rc0: ENE eHome Infrared Remote Receiver as /devices/virtual/rc/rc0
[   15.619415] ene_ir: driver has been successfully loaded
[   15.643691] IR RC5(x) protocol handler initialized
[   15.658295] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   15.658358] HDA Intel 0000:00:1b.0: irq 49 for MSI/MSI-X
[   15.658392] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   15.875047] IR RC6 protocol handler initialized
[   15.889762] IR JVC protocol handler initialized
[   15.915887] input: HDA Intel Mic at Sep UNKNOWN Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   15.918617] input: HDA Intel Mic at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   15.919116] input: HDA Intel HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   16.110414] input: HP WMI hotkeys as /devices/virtual/input/input12
[   16.125803] nvidia 0000:01:00.0: power state changed by ACPI to D0
[   16.125817] nvidia 0000:01:00.0: power state changed by ACPI to D0
[   16.125840] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   16.125862] nvidia 0000:01:00.0: setting latency timer to 64
[   16.125875] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[   16.126064] NVRM: loading NVIDIA UNIX x86 Kernel Module  173.14.30  Thu Apr 14 08:47:14 PDT 2011
[   16.141675] IR Sony protocol handler initialized
[   16.154720] lirc_dev: IR Remote Control driver registered, major 249 
[   16.155128] rc rc0: lirc_dev: driver ir-lirc-codec (ene_ir) registered at minor = 0
[   16.155131] IR LIRC bridge handler initialized
[   16.201585] Linux video capture interface: v2.00
[   16.202236] uvcvideo: Found UVC 1.00 device HP Webcam (0408:03ba)
[   16.208631] input: HP Webcam as /devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4:1.0/input/input13
[   16.208765] usbcore: registered new interface driver uvcvideo
[   16.208768] USB Video Class driver (v1.1.0)
[   16.300858] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   16.547112] Synaptics Touchpad, model: 1, fw: 6.5, id: 0x1c0b1, caps: 0xa04751/0xa00000/0x0
[   16.605914] dvb-usb: found a 'AVerMedia A309' in cold state, will try to load a firmware
[   16.663731] dvb-usb: downloading firmware from file 'dvb-usb-af9015.fw'
[   16.667598] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input14
[   16.687165] type=1400 audit(1319533481.162:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session-wrapper" pid=1011 comm="apparmor_parser"
[   16.687428] type=1400 audit(1319533481.162:6): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1012 comm="apparmor_parser"
[   16.697039] type=1400 audit(1319533481.174:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1012 comm="apparmor_parser"
[   16.697339] type=1400 audit(1319533481.174:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1012 comm="apparmor_parser"
[   16.717059] type=1400 audit(1319533481.194:9): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=1013 comm="apparmor_parser"
[   16.742898] type=1400 audit(1319533481.218:10): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=1013 comm="apparmor_parser"
[   16.751258] type=1400 audit(1319533481.226:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=1015 comm="apparmor_parser"
[   16.751661] dvb-usb: found a 'AVerMedia A309' in warm state.
[   16.751732] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[   16.752264] DVB: registering new adapter (AVerMedia A309)
[   16.773162] af9013: firmware version:4.95.0.0
[   16.776914] DVB: registering adapter 0 frontend 0 (Afatech AF9013 DVB-T)...
[   16.789805] MXL5005S: Attached at address 0xc6
[   16.789810] dvb-usb: AVerMedia A309 successfully initialized and connected.
[   16.797001] usbcore: registered new interface driver dvb_usb_af9015
[   16.841692] vesafb: mode is 640x480x32, linelength=2560, pages=0
[   16.841696] vesafb: scrolling: redraw
[   16.841699] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[   16.842551] vesafb: framebuffer at 0xd1000000, mapped to 0xf8b00000, using 1216k, total 1216k
[   16.842716] Console: switching to colour frame buffer device 80x30
[   16.842731] fb0: VESA VGA frame buffer device
[   16.910557] ppdev: user-space parallel port driver
[   16.973877] init: failsafe main process (953) killed by TERM signal
[   16.982218] init: apport pre-start process (1085) terminated with status 1
[   17.001505] init: apport post-stop process (1112) terminated with status 1
[   17.024952] r8169 0000:03:00.0: eth0: link down
[   17.029442] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   17.503969] vboxdrv: Found 2 processor cores.
[   17.504080] vboxdrv: fAsync=0 offMin=0x1fe offMax=0x92e
[   17.504140] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[   17.504143] vboxdrv: Successfully loaded version 4.1.2_Ubuntu (interface 0x00190000).
[   17.518328] vboxpci: IOMMU not found (not registered)
[   17.558985] Bluetooth: Core ver 2.16
[   17.559010] NET: Registered protocol family 31
[   17.559012] Bluetooth: HCI device and connection manager initialized
[   17.559015] Bluetooth: HCI socket layer initialized
[   17.559017] Bluetooth: L2CAP socket layer initialized
[   17.559552] Bluetooth: SCO socket layer initialized
[   17.562372] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   17.562375] Bluetooth: BNEP filters: protocol multicast
[   17.568957] Bluetooth: RFCOMM TTY layer initialized
[   17.568963] Bluetooth: RFCOMM socket layer initialized
[   17.568965] Bluetooth: RFCOMM ver 1.11
[   22.485700] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[   26.254117] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[   27.504084] eth1: no IPv6 routers present
[   50.560043] eth1: no IPv6 routers present
[  164.881740] CE: hpet increased min_delta_ns to 20113 nsec
[  430.088101] CE: hpet increased min_delta_ns to 30169 nsec
[  899.518521] irq_handler: 21 callbacks suppressed
[  899.518529] firewire_ohci: isochronous cycle inconsistent
[  900.109277] firewire_core: created device fw1: GUID 080046010415059e, S100
[  900.109292] firewire_core: phy config: card 0, new root=ffc1, gap_count=5
[  900.110906] firewire_core: IRM is not 1394a compliant, making local node (ffc0) root.
[  900.110915] firewire_core: phy config: card 0, new root=ffc0, gap_count=5
[ 1174.471819] warning: `VirtualBox' uses 32-bit capabilities (legacy support in use)
[ 2076.040712] firewire_ohci: isochronous cycle inconsistent
[ 2076.631310] firewire_core: created device fw1: GUID 080046010415059e, S100
[ 2076.631317] firewire_core: phy config: card 0, new root=ffc1, gap_count=5
[ 2076.631710] firewire_core: IRM is not 1394a compliant, making local node (ffc0) root.
[ 2076.631713] firewire_core: phy config: card 0, new root=ffc0, gap_count=5

Codice: Seleziona tutto

    0.180025] pci 0000:00:1c.3: PCI bridge to [bus 02-02]
[    0.180029] pci 0000:00:1c.3:   bridge window [io  0xd000-0xdfff]
[    0.180032] pci 0000:00:1c.3:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.180036] pci 0000:00:1c.3:   bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref]
[    0.180087] pci 0000:00:1e.0: PCI bridge to [bus 04-04] (subtractive decode)
[    0.180090] pci 0000:00:1e.0:   bridge window [io  0xf000-0x0000] (disabled)
[    0.180093] pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
[    0.180098] pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.180100] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.180102] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.180104] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.180106] pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[    0.180107] pci 0000:00:1e.0:   bridge window [mem 0xe0000000-0xffffffff] (subtractive decode)
[    0.180120] pci_bus 0000:00: on NUMA node 0
[    0.180124] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.180224] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[    0.180297] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[    0.180327] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
[    0.180371]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    0.180373]  pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[    0.180375] ACPI _OSC control for PCIe not granted, disabling ASPM
[    0.184132] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.184167] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.184202] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
[    0.184236] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.184270] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.184304] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.184338] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.184372] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.184462] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.184465] vgaarb: loaded
[    0.184466] vgaarb: bridge control possible 0000:01:00.0
[    0.184614] SCSI subsystem initialized
[    0.184658] libata version 3.00 loaded.
[    0.184690] usbcore: registered new interface driver usbfs
[    0.184698] usbcore: registered new interface driver hub
[    0.184718] usbcore: registered new device driver usb
[    0.184779] PCI: Using ACPI for IRQ routing
[    0.184781] PCI: pci_cache_line_size set to 64 bytes
[    0.184836] reserve RAM buffer: 000000000009fc00 - 000000000009ffff 
[    0.184838] reserve RAM buffer: 00000000dff90000 - 00000000dfffffff 
[    0.184909] NetLabel: Initializing
[    0.184910] NetLabel:  domain hash size = 128
[    0.184911] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.184919] NetLabel:  unlabeled traffic allowed by default
[    0.184944] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.184947] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.184950] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.188040] Switching to clocksource hpet
[    0.191704] Switched to NOHz mode on CPU #0
[    0.191784] Switched to NOHz mode on CPU #1
[    0.193233] AppArmor: AppArmor Filesystem Enabled
[    0.193254] pnp: PnP ACPI init
[    0.193266] ACPI: bus type pnp registered
[    0.193339] pnp 00:00: [bus 00-ff]
[    0.193341] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.193343] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.193345] pnp 00:00: [io  0x0d00-0xffff window]
[    0.193346] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.193348] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[    0.193350] pnp 00:00: [mem 0xe0000000-0xffffffff window]
[    0.193394] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    0.193401] pnp 00:01: [mem 0xfed14000-0xfed19fff]
[    0.193435] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
[    0.193438] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.193464] pnp 00:02: [dma 4]
[    0.193465] pnp 00:02: [io  0x0000-0x000f]
[    0.193467] pnp 00:02: [io  0x0081-0x0083]
[    0.193468] pnp 00:02: [io  0x0087]
[    0.193469] pnp 00:02: [io  0x0089-0x008b]
[    0.193471] pnp 00:02: [io  0x008f]
[    0.193472] pnp 00:02: [io  0x00c0-0x00df]
[    0.193490] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.193498] pnp 00:03: [io  0x0070-0x0071]
[    0.193508] pnp 00:03: [irq 8]
[    0.193525] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.193532] pnp 00:04: [io  0x0061]
[    0.193552] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.193558] pnp 00:05: [io  0x00f0-0x00ff]
[    0.193562] pnp 00:05: [irq 13]
[    0.193580] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.193799] pnp 00:06: [irq 6]
[    0.193801] pnp 00:06: [dma 2]
[    0.193802] pnp 00:06: [io  0x03f0-0x03f5]
[    0.193804] pnp 00:06: [io  0x03f7]
[    0.193844] pnp 00:06: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.194110] pnp 00:07: [irq 7]
[    0.194111] pnp 00:07: [dma 3]
[    0.194113] pnp 00:07: [io  0x0378-0x037f]
[    0.194114] pnp 00:07: [io  0x0778-0x077f]
[    0.194216] pnp 00:07: Plug and Play ACPI device, IDs PNP0401 (active)
[    0.194237] pnp 00:08: [io  0x0000-0xffffffffffffffff disabled]
[    0.194239] pnp 00:08: [io  0x0000-0xffffffffffffffff disabled]
[    0.194241] pnp 00:08: [io  0x0290-0x0297]
[    0.194275] system 00:08: [io  0x0290-0x0297] has been reserved
[    0.194277] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.194330] pnp 00:09: [io  0x0010-0x001f]
[    0.194332] pnp 00:09: [io  0x0022-0x003f]
[    0.194333] pnp 00:09: [io  0x0044-0x005f]
[    0.194335] pnp 00:09: [io  0x0062-0x0063]
[    0.194336] pnp 00:09: [io  0x0065-0x006f]
[    0.194337] pnp 00:09: [io  0x0072-0x007f]
[    0.194339] pnp 00:09: [io  0x0080]
[    0.194340] pnp 00:09: [io  0x0084-0x0086]
[    0.194341] pnp 00:09: [io  0x0088]
[    0.194343] pnp 00:09: [io  0x008c-0x008e]
[    0.194344] pnp 00:09: [io  0x0090-0x009f]
[    0.194345] pnp 00:09: [io  0x00a2-0x00bf]
[    0.194347] pnp 00:09: [io  0x00e0-0x00ef]
[    0.194348] pnp 00:09: [io  0x04d0-0x04d1]
[    0.194349] pnp 00:09: [io  0x0800-0x087f]
[    0.194351] pnp 00:09: [io  0x0000-0xffffffffffffffff disabled]
[    0.194353] pnp 00:09: [io  0x0480-0x04bf]
[    0.194354] pnp 00:09: [mem 0xfed1c000-0xfed1ffff]
[    0.194356] pnp 00:09: [mem 0xfed20000-0xfed8ffff]
[    0.194396] system 00:09: [io  0x04d0-0x04d1] has been reserved
[    0.194398] system 00:09: [io  0x0800-0x087f] has been reserved
[    0.194400] system 00:09: [io  0x0480-0x04bf] has been reserved
[    0.194402] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.194404] system 00:09: [mem 0xfed20000-0xfed8ffff] has been reserved
[    0.194407] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.194456] pnp 00:0a: [mem 0xfed00000-0xfed003ff]
[    0.194476] pnp 00:0a: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.194512] pnp 00:0b: [mem 0xffb00000-0xffbfffff]
[    0.194513] pnp 00:0b: [mem 0xfff00000-0xffffffff]
[    0.194533] pnp 00:0b: Plug and Play ACPI device, IDs INT0800 (active)
[    0.194562] pnp 00:0c: [mem 0xffc00000-0xffefffff]
[    0.194593] system 00:0c: [mem 0xffc00000-0xffefffff] has been reserved
[    0.194596] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.194635] pnp 00:0d: [io  0x0000-0xffffffffffffffff disabled]
[    0.194637] pnp 00:0d: [io  0x0000-0xffffffffffffffff disabled]
[    0.194639] pnp 00:0d: [mem 0xfec00000-0xfec00fff]
[    0.194640] pnp 00:0d: [mem 0xfee00000-0xfee00fff]
[    0.194672] system 00:0d: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.194674] system 00:0d: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.194676] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.194698] pnp 00:0e: [io  0x0060]
[    0.194699] pnp 00:0e: [io  0x0064]
[    0.194703] pnp 00:0e: [irq 1]
[    0.194731] pnp 00:0e: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.194926] pnp 00:0f: [irq 4]
[    0.194930] pnp 00:0f: [dma 0 disabled]
[    0.194931] pnp 00:0f: [io  0x03f8-0x03ff]
[    0.194980] pnp 00:0f: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.195003] pnp 00:10: [mem 0xf0000000-0xf3ffffff]
[    0.195035] system 00:10: [mem 0xf0000000-0xf3ffffff] has been reserved
[    0.195037] system 00:10: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.195156] pnp 00:11: [mem 0x00000000-0x0009ffff]
[    0.195157] pnp 00:11: [mem 0x000c0000-0x000cffff]
[    0.195159] pnp 00:11: [mem 0x000e0000-0x000fffff]
[    0.195160] pnp 00:11: [mem 0x00100000-0xdfffffff]
[    0.195162] pnp 00:11: [mem 0x00000000-0xffffffffffffffff disabled]
[    0.195202] system 00:11: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.195204] system 00:11: [mem 0x000c0000-0x000cffff] could not be reserved
[    0.195206] system 00:11: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.195208] system 00:11: [mem 0x00100000-0xdfffffff] could not be reserved
[    0.195210] system 00:11: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.195303] pnp: PnP ACPI: found 18 devices
[    0.195304] ACPI: ACPI bus type pnp unregistered
[    0.195307] PnPBIOS: Disabled by ACPI PNP
[    0.230924] PCI: max bus depth: 1 pci_try_num: 2
[    0.230955] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf4000000-0xf41fffff 64bit pref]
[    0.230957] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.230959] pci 0000:00:01.0:   bridge window [io  0xc000-0xcfff]
[    0.230962] pci 0000:00:01.0:   bridge window [mem 0xfa000000-0xfe9fffff]
[    0.230964] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[    0.230968] pci 0000:00:1c.0: PCI bridge to [bus 03-03]
[    0.230970] pci 0000:00:1c.0:   bridge window [io  0xe000-0xefff]
[    0.230973] pci 0000:00:1c.0:   bridge window [mem 0xfeb00000-0xfebfffff]
[    0.230976] pci 0000:00:1c.0:   bridge window [mem 0xf4000000-0xf41fffff 64bit pref]
[    0.230981] pci 0000:00:1c.3: PCI bridge to [bus 02-02]
[    0.230983] pci 0000:00:1c.3:   bridge window [io  0xd000-0xdfff]
[    0.230987] pci 0000:00:1c.3:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.230990] pci 0000:00:1c.3:   bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref]
[    0.230994] pci 0000:00:1e.0: PCI bridge to [bus 04-04]
[    0.230995] pci 0000:00:1e.0:   bridge window [io  disabled]
[    0.230999] pci 0000:00:1e.0:   bridge window [mem disabled]
[    0.231002] pci 0000:00:1e.0:   bridge window [mem pref disabled]
[    0.231019] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.231022] pci 0000:00:01.0: setting latency timer to 64
[    0.231027] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.231030] pci 0000:00:1c.0: setting latency timer to 64
[    0.231038] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    0.231042] pci 0000:00:1c.3: setting latency timer to 64
[    0.231047] pci 0000:00:1e.0: setting latency timer to 64
[    0.231050] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.231051] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.231053] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.231055] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[    0.231056] pci_bus 0000:00: resource 8 [mem 0xe0000000-0xffffffff]
[    0.231058] pci_bus 0000:01: resource 0 [io  0xc000-0xcfff]
[    0.231060] pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfe9fffff]
[    0.231062] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[    0.231063] pci_bus 0000:03: resource 0 [io  0xe000-0xefff]
[    0.231065] pci_bus 0000:03: resource 1 [mem 0xfeb00000-0xfebfffff]
[    0.231067] pci_bus 0000:03: resource 2 [mem 0xf4000000-0xf41fffff 64bit pref]
[    0.231068] pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
[    0.231070] pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff]
[    0.231072] pci_bus 0000:02: resource 2 [mem 0xf8f00000-0xf8ffffff 64bit pref]
[    0.231074] pci_bus 0000:04: resource 4 [io  0x0000-0x0cf7]
[    0.231075] pci_bus 0000:04: resource 5 [io  0x0d00-0xffff]
[    0.231077] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[    0.231078] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000dffff]
[    0.231080] pci_bus 0000:04: resource 8 [mem 0xe0000000-0xffffffff]
[    0.231110] NET: Registered protocol family 2
[    0.231162] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.231326] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.231643] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.231794] TCP: Hash tables configured (established 131072 bind 65536)
[    0.231796] TCP reno registered
[    0.231798] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.231803] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.231865] NET: Registered protocol family 1
[    0.231965] pci 0000:01:00.0: Boot video device
[    0.231972] PCI: CLS 32 bytes, default 64
[    0.232216] audit: initializing netlink socket (disabled)
[    0.232223] type=2000 audit(1319542689.228:1): initialized
[    0.251754] highmem bounce pool size: 64 pages
[    0.251758] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.262515] VFS: Disk quotas dquot_6.5.2
[    0.262567] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.263036] fuse init (API version 7.16)
[    0.263099] msgmni has been set to 1627
[    0.263323] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.263340] io scheduler noop registered
[    0.263342] io scheduler deadline registered
[    0.263351] io scheduler cfq registered (default)
[    0.263428] pcieport 0000:00:01.0: setting latency timer to 64
[    0.263452] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    0.263484] pcieport 0000:00:1c.0: setting latency timer to 64
[    0.263511] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[    0.263554] pcieport 0000:00:1c.3: setting latency timer to 64
[    0.263582] pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X
[    0.263638] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.263655] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.263702] intel_idle: MWAIT substates: 0x220
[    0.263704] intel_idle: does not run on family 6 model 15
[    0.263763] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    0.263767] ACPI: Power Button [PWRB]
[    0.263796] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.263799] ACPI: Power Button [PWRF]
[    0.263820] ACPI: acpi_idle registered with cpuidle
[    0.265225] ERST: Table is not found!
[    0.265279] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.285562] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.285660] isapnp: Scanning for PnP cards...
[    0.355732] Freeing initrd memory: 13320k freed
[    0.638349] isapnp: No Plug & Play device found
[    0.696495] 00:0f: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.696705] Linux agpgart interface v0.103
[    0.697655] brd: module loaded
[    0.698054] loop: module loaded
[    0.698178] ata_piix 0000:00:1f.1: version 2.13
[    0.698195] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    0.698224] ata_piix 0000:00:1f.1: setting latency timer to 64
[    0.698443] scsi0 : ata_piix
[    0.698500] scsi1 : ata_piix
[    0.699320] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[    0.699322] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[    0.699340] ata_piix 0000:00:1f.2: PCI INT B -> GSI 22 (level, low) -> IRQ 22
[    0.699345] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    0.699373] ata_piix 0000:00:1f.2: setting latency timer to 64
[    0.699560] scsi2 : ata_piix
[    0.699604] scsi3 : ata_piix
[    0.700560] ata3: SATA max UDMA/133 cmd 0xb400 ctl 0xb080 bmdma 0xa880 irq 22
[    0.700562] ata4: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa888 irq 22
[    0.700813] Fixed MDIO Bus: probed
[    0.700830] PPP generic driver version 2.4.2
[    0.700856] tun: Universal TUN/TAP device driver, 1.6
[    0.700857] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.700920] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.700935] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.700943] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    0.700945] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    0.700968] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    0.700982] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[    0.700990] ehci_hcd 0000:00:1d.7: debug port 1
[    0.704859] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    0.704869] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf9ffbc00
[    0.720020] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.720135] hub 1-0:1.0: USB hub found
[    0.720140] hub 1-0:1.0: 8 ports detected
[    0.720215] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.720224] uhci_hcd: USB Universal Host Controller Interface driver
[    0.720239] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.720243] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.720245] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.720267] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.720286] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b480
[    0.720370] hub 2-0:1.0: USB hub found
[    0.720373] hub 2-0:1.0: 2 ports detected
[    0.720414] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.720418] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.720420] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.720443] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    0.720468] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b800
[    0.720548] hub 3-0:1.0: USB hub found
[    0.720551] hub 3-0:1.0: 2 ports detected
[    0.720590] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.720594] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    0.720596] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.720619] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    0.720643] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b880
[    0.720720] hub 4-0:1.0: USB hub found
[    0.720723] hub 4-0:1.0: 2 ports detected
[    0.720766] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[    0.720770] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    0.720773] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    0.720794] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    0.720818] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000bc00
[    0.720895] hub 5-0:1.0: USB hub found
[    0.720897] hub 5-0:1.0: 2 ports detected
[    0.720978] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    0.720979] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    0.721464] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.721521] mousedev: PS/2 mouse device common for all mice
[    0.721606] rtc_cmos 00:03: RTC can wake from S4
[    0.721676] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    0.721695] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.721748] device-mapper: uevent: version 1.0.3
[    0.721797] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
[    0.721819] EISA: Probing bus 0 at eisa.0
[    0.721821] EISA: Cannot allocate resource for mainboard
[    0.721823] Cannot allocate resource for EISA slot 1
[    0.721824] Cannot allocate resource for EISA slot 2
[    0.721825] Cannot allocate resource for EISA slot 3
[    0.721827] Cannot allocate resource for EISA slot 4
[    0.721828] Cannot allocate resource for EISA slot 5
[    0.721829] Cannot allocate resource for EISA slot 6
[    0.721830] Cannot allocate resource for EISA slot 7
[    0.721832] Cannot allocate resource for EISA slot 8
[    0.721833] EISA: Detected 0 cards.
[    0.721839] cpufreq-nforce2: No nForce2 chipset.
[    0.721841] cpuidle: using governor ladder
[    0.721842] cpuidle: using governor menu
[    0.721843] EFI Variables Facility v0.08 2004-May-17
[    0.722051] TCP cubic registered
[    0.722145] NET: Registered protocol family 10
[    0.722558] NET: Registered protocol family 17
[    0.722568] Registering the dns_resolver key type
[    0.722580] Using IPI No-Shortcut mode
[    0.722632] PM: Hibernation image not present or could not be loaded.
[    0.722643] registered taskstats version 1
[    0.731985]   Magic number: 15:649:631
[    0.732056] rtc_cmos 00:03: setting system clock to 2011-10-25 11:38:09 UTC (1319542689)
[    0.732391] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.732392] EDD information not available.
[    0.742575] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[    0.868360] ata1.00: ATAPI: HL-DT-STDVD-RAM GH22NP20, 1.02, max UDMA/66
[    0.876166] ata3.00: ATA-7: WDC WD3200AAJS-65RYA0, 12.01B01, max UDMA/133
[    0.876170] ata3.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    0.884222] ata1.00: configured for UDMA/66
[    0.886243] scsi 0:0:0:0: CD-ROM            HL-DT-ST DVD-RAM GH22NP20 1.02 PQ: 0 ANSI: 5
[    0.888193] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    0.888196] cdrom: Uniform CD-ROM driver Revision: 3.20
[    0.888287] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    0.888322] sr 0:0:0:0: Attached scsi generic sg0 type 5
[    0.892266] ata4.00: ATA-8: WDC WD5000AAKS-00M9A0, 05.01D05, max UDMA/133
[    0.892269] ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    0.896316] ata3.01: ATA-8: WDC WD5000AAKS-00YGA0, 12.01C02, max UDMA/133
[    0.896319] ata3.01: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    0.908254] ata4.00: configured for UDMA/133
[    0.912121] ata3.00: configured for UDMA/133
[    0.928821] ata3.01: configured for UDMA/133
[    0.928904] scsi 2:0:0:0: Direct-Access     ATA      WDC WD3200AAJS-6 12.0 PQ: 0 ANSI: 5
[    0.929008] sd 2:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    0.929019] sd 2:0:0:0: Attached scsi generic sg1 type 0
[    0.929043] sd 2:0:0:0: [sda] Write Protect is off
[    0.929045] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    0.929063] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.929084] scsi 2:0:1:0: Direct-Access     ATA      WDC WD5000AAKS-0 12.0 PQ: 0 ANSI: 5
[    0.929151] sd 2:0:1:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    0.929162] sd 2:0:1:0: Attached scsi generic sg2 type 0
[    0.929183] sd 2:0:1:0: [sdb] Write Protect is off
[    0.929186] sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[    0.929201] sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.929229] scsi 3:0:0:0: Direct-Access     ATA      WDC WD5000AAKS-0 05.0 PQ: 0 ANSI: 5
[    0.929306] sd 3:0:0:0: Attached scsi generic sg3 type 0
[    0.929388] sd 3:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    0.929431] sd 3:0:0:0: [sdc] Write Protect is off
[    0.929434] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    0.929453] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.952589]  sdc: sdc1 sdc2 sdc3 < sdc5 sdc6 >
[    0.952869] sd 3:0:0:0: [sdc] Attached SCSI disk
[    1.032079] usb 1-3: new high speed USB device number 2 using ehci_hcd
[    1.041142]  sdb: sdb1 sdb2 < sdb5 sdb6 sdb7 sdb8 > sdb3 sdb4
[    1.052135]  sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
[    1.052413] sd 2:0:0:0: [sda] Attached SCSI disk
[    1.052419] sd 2:0:1:0: [sdb] Attached SCSI disk
[    1.052475] Freeing unused kernel memory: 720k freed
[    1.052628] Write protecting the kernel text: 5496k
[    1.052670] Write protecting the kernel read-only data: 2232k
[    1.052671] NX-protecting the kernel data: 4744k
[    1.063479] udevd[89]: starting version 173
[    1.093952] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.093968] r8169 0000:02:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    1.093998] r8169 0000:02:00.0: setting latency timer to 64
[    1.094044] r8169 0000:02:00.0: irq 43 for MSI/MSI-X
[    1.094399] r8169 0000:02:00.0: eth0: RTL8168c/8111c at 0xf8416000, 20:cf:30:ec:50:11, XID 1c4000c0 IRQ 43
[    1.106886] firewire_ohci 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.106892] firewire_ohci 0000:03:00.0: setting latency timer to 64
[    1.125179] Floppy drive(s): fd0 is 1.44M
[    1.143821] FDC 0 is a post-1991 82077
[    1.168093] firewire_ohci: Added fw-ohci device 0000:03:00.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x11
[    1.228096] Refined TSC clocksource calibration: 3294.608 MHz.
[    1.228101] Switching to clocksource tsc
[    1.632081] usb 4-1: new low speed USB device number 2 using uhci_hcd
[    1.668142] firewire_core: created device fw0: GUID 0011066600000011, S400
[    1.829208] input: Logitech USB RECEIVER as /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.0/input/input3
[    1.829280] generic-usb 0003:046D:C50E.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB RECEIVER] on usb-0000:00:1d.2-1/input0
[    1.829289] usbcore: registered new interface driver usbhid
[    1.829290] usbhid: USB HID core driver
[    2.166250] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: (null)
[   16.990167] udevd[349]: starting version 173
[   17.037892] lp: driver loaded but no devices found
[   17.038842] Adding 3943920k swap on /dev/sdb6.  Priority:-1 extents:1 across:3943920k 
[   17.131981] type=1400 audit(1319535505.893:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=467 comm="apparmor_parser"
[   17.132275] type=1400 audit(1319535505.897:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=467 comm="apparmor_parser"
[   17.132451] type=1400 audit(1319535505.897:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=467 comm="apparmor_parser"
[   17.136707] intel_rng: FWH not detected
[   17.156096] parport_pc 00:07: reported by Plug and Play ACPI
[   17.156194] parport0: PC-style at 0x378 (0x778), irq 7
[   17.156305] leds_ss4200: no LED devices found
[   17.156746] , dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[   17.199849] nvidia: module license 'NVIDIA' taints kernel.
[   17.199851] Disabling lock debugging due to kernel taint
[   17.256114] lp0: using parport0 (interrupt-driven).
[   17.416184] ppdev: user-space parallel port driver
[   17.583915] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   17.583953] HDA Intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[   17.583971] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   17.594732] Linux video capture interface: v2.00
[   17.595668] uvcvideo: Found UVC 1.00 device <unnamed> (046d:09a4)
[   17.610338] input: UVC Camera (046d:09a4) as /devices/pci0000:00/0000:00:1d.7/usb1/1-3/1-3:1.0/input/input4
[   17.610486] usbcore: registered new interface driver uvcvideo
[   17.610488] USB Video Class driver (v1.1.0)
[   17.630098] hda_codec: ALC887: BIOS auto-probing.
[   17.641002] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[   18.033689] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   18.033696] nvidia 0000:01:00.0: setting latency timer to 64
[   18.033699] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[   18.033834] NVRM: loading NVIDIA UNIX x86 Kernel Module  280.13  Wed Jul 27 16:55:43 PDT 2011
[   18.608183] 2:3:1: cannot set freq 16000 to ep 0x86
[   18.608332] set volume quirk for QuickCam E3500
[   18.608485] usbcore: registered new interface driver snd-usb-audio
[   19.360367] init: udev-fallback-graphics main process (842) terminated with status 1
[   28.152982] EXT4-fs (sdb3): re-mounted. Opts: errors=remount-ro
[   28.222542] EXT3-fs: barriers not enabled
[   28.235032] kjournald starting.  Commit interval 5 seconds
[   28.235312] EXT3-fs (sdb8): using internal journal
[   28.235316] EXT3-fs (sdb8): mounted filesystem with ordered data mode
[   28.758520] type=1400 audit(1319535517.521:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=941 comm="apparmor_parser"
[   28.758913] type=1400 audit(1319535517.521:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=941 comm="apparmor_parser"
[   28.762838] type=1400 audit(1319535517.525:7): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=945 comm="apparmor_parser"
[   28.764029] type=1400 audit(1319535517.529:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session-wrapper" pid=944 comm="apparmor_parser"
[   28.764600] type=1400 audit(1319535517.529:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=945 comm="apparmor_parser"
[   28.764779] type=1400 audit(1319535517.529:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=945 comm="apparmor_parser"
[   28.770718] type=1400 audit(1319535517.533:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=947 comm="apparmor_parser"
[   28.788179] type=1400 audit(1319535517.553:12): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=950 comm="apparmor_parser"
[   28.791193] type=1400 audit(1319535517.553:13): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=947 comm="apparmor_parser"
[   28.792350] type=1400 audit(1319535517.557:14): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=950 comm="apparmor_parser"
[   28.847511] r8169 0000:02:00.0: eth0: link down
[   28.847517] r8169 0000:02:00.0: eth0: link down
[   28.847652] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   28.870633] init: failsafe main process (888) killed by TERM signal
[   28.871239] init: apport pre-start process (1006) terminated with status 1
[   28.886530] init: apport post-stop process (1040) terminated with status 1
[   28.967594] vboxdrv: Found 2 processor cores.
[   28.968060] vboxdrv: fAsync=0 offMin=0x2be offMax=0x10fb
[   28.969656] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[   28.969658] vboxdrv: Successfully loaded version 4.1.4 (interface 0x00190000).
[   29.176791] vboxpci: IOMMU not found (not registered)
[   29.197012] Bluetooth: Core ver 2.16
[   29.197028] NET: Registered protocol family 31
[   29.197030] Bluetooth: HCI device and connection manager initialized
[   29.197031] Bluetooth: HCI socket layer initialized
[   29.197033] Bluetooth: L2CAP socket layer initialized
[   29.197326] Bluetooth: SCO socket layer initialized
[   29.198785] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   29.198787] Bluetooth: BNEP filters: protocol multicast
[   29.201821] Bluetooth: RFCOMM TTY layer initialized
[   29.201824] Bluetooth: RFCOMM socket layer initialized
[   29.201825] Bluetooth: RFCOMM ver 1.11
[   29.477343] EXT4-fs (sdb3): re-mounted. Opts: errors=remount-ro,commit=0
[   30.018026] init: plymouth-upstart-bridge main process (933) killed by TERM signal
[   30.534929] r8169 0000:02:00.0: eth0: link up
[   30.535036] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   31.174548] EXT4-fs (sdb3): re-mounted. Opts: errors=remount-ro,commit=0
[   31.764087] 2:3:1: cannot get freq at ep 0x86
[   40.944043] eth0: no IPv6 routers present
[   56.260149] 2:3:1: cannot get freq at ep 0x86
[  273.466047] irq_handler: 18 callbacks suppressed
[  273.466050] firewire_ohci: isochronous cycle inconsistent
[  274.054764] firewire_core: created device fw1: GUID 0800460103d3146a, S100
[  274.054770] firewire_core: phy config: card 0, new root=ffc1, gap_count=5
[  463.086103] firewire_ohci: isochronous cycle inconsistent
[  463.675420] firewire_core: created device fw1: GUID 0800460103d3146a, S100
[  463.675425] firewire_core: phy config: card 0, new root=ffc1, gap_count=5
enzo@oneiric:~$ 

Codice: Seleziona tutto

kdenlive

Codice: Seleziona tutto

(kdenlive:2286): Gtk-WARNING **: Impossibile trovare il motore del tema in module_path: «pixmap»,

(kdenlive:2286): Gtk-WARNING **: Impossibile trovare il motore del tema in module_path: «pixmap»,

(kdenlive:2286): Gtk-WARNING **: Impossibile trovare il motore del tema in module_path: «pixmap»,

(kdenlive:2286): Gtk-WARNING **: Impossibile trovare il motore del tema in module_path: «pixmap»,
project monitor connected 
clip monitor connected 
QWidget::insertAction: Attempt to insert null action
QWidget::insertAction: Attempt to insert null action