HP Laserjet 5L su 11.10

[gotikrose]

Ciao a tutti...ho dei problemi ad installare la mia stampante...
faccio impostazioni di sistema => stampa => aggiungi stampa
mi chiede l'indirizzo IP della stampante...ma non so qual'è

..come potete capire non sono molto pratica...
Spero che qualcuno mi possa aiutare

Grazie in anticipo

[bingel]

Allora, innanzitutto come è collegata la stampante? Tramite cavo usb o parallelo? O si tratta di una stampante di rete collegata quindi tramite cavo di rete?

[gotikrose]

collegata con usb

[bingel]

Allora posta innanzitutto l'output di questo comando:

Codice: Seleziona tutto

lsusb

dopodiché prova ad eseguire questo comando:

Codice: Seleziona tutto

sudo hp-setup -i

Conferma le varie videate che ti si presenteranno (premi invio a ogni domanda, dando per sicurezza una letta a quanto ti viene richiesto o notificato).

Se tutto fila liscio, alla fine verrà stampata una pagina di prova.

A stampante funzionante (sperando che coi precedenti comandi tu riesca a risolvere) o meno prova poi ad eseguire questo comando:

Codice: Seleziona tutto

sudo hp-check

e postane l'output.

[gotikrose]

il riaultato di questo comando

Codice: Seleziona tutto

lsusb

è:

Codice: Seleziona tutto

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 05e1:0501 Syntek Semiconductor Co., Ltd DC-1125 Webcam
Bus 007 Device 002: ID 046d:c016 Logitech, Inc. Optical Wheel Mouse
Bus 007 Device 003: ID 0b05:1712 ASUSTek Computer, Inc. BT-183 Bluetooth 2.0+EDR adapter
Bus 005 Device 004: ID 067b:2305 Prolific Technology, Inc. PL2305 Parallel Port

dopo questo comando:

Codice: Seleziona tutto

sudo hp-setup -i

questo è il risultato:

Codice: Seleziona tutto

HP Linux Imaging and Printing System (ver. 3.11.7)
Printer/Fax Setup Utility ver. 9.0

Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

(Note: Defaults for each question are maked with a '*'. Press <enter> to accept the default.)


--------------------------------
| SELECT CONNECTION (I/O) TYPE |
--------------------------------

  Num       Connection  Description                                               
            Type                                                                  
  --------  ----------  ----------------------------------------------------------
  0*        usb         Universal Serial Bus (USB)                                
  1         net         Network/Ethernet/Wireless (direct connection or JetDirect)
  2         par         Parallel Port (LPT:)                                      

Enter number 0...2 for connection type (q=quit, enter=usb*) ? 

Using connection type: usb

error: No device selected/specified or that supports this functionality.

'ultimo codice:

Codice: Seleziona tutto

sudo hp-check

risultato:

Codice: Seleziona tutto

HP Linux Imaging and Printing System (ver. 3.11.7)
Dependency/Version Check Utility ver. 14.3

Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the
HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies
are installed to successfully compile HPLIP.                                    
2. Run-time check mode (-r or --run): Use this mode to determine if a distro    
supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball   
has the proper dependencies installed to successfully run.                      
3. Both compile- and run-time check mode (-b or --both) (Default): This mode    
will check both of the above cases (both compile- and run-time dependencies).   

Saving output in log file: hp-check.log

Initializing. Please wait...
|
(hp-check:4718): Gtk-WARNING **: Impossibile trovare il motore del tema in module_path: ?pixmap?,

(hp-check:4718): Gtk-WARNING **: Impossibile trovare il motore del tema in module_path: ?pixmap?,

(hp-check:4718): Gtk-WARNING **: Impossibile trovare il motore del tema in module_path: ?pixmap?,

(hp-check:4718): Gtk-WARNING **: Impossibile trovare il motore del tema in module_path: ?pixmap?,
 
---------------
| SYSTEM INFO |
---------------

Basic system information:
Linux caramellandia 3.0.0-12-generic #20-Ubuntu SMP Fri Oct 7 14:50:42 UTC 2011 i686 i686 i386 GNU/Linux

Distribution:
ubuntu 11.10

Checking Python version...
OK, version 2.7.2 installed

Checking PyQt 4.x version...
OK, version 4.8.5 installed.

Checking for CUPS...
Status: scheduler is running
warning: Version: (cups-config) Not available. Unable to determine installed version of CUPS.)
error_log is set to level: warn

Checking for dbus/python-dbus...
dbus daemon is running.
python-dbus version: 0.84.0


------------------------------------
| COMPILE AND RUNTIME DEPENDENCIES |
------------------------------------

note: To check for compile-time only dependencies, re-run hp-check with the -c parameter (ie, hp-check -c).
note: To check for run-time only dependencies, re-run hp-check with the -r parameter (ie, hp-check -r).

Checking for dependency: CUPS - Common Unix Printing System...
OK, found.

Checking for dependency: CUPS DDK - CUPS driver development kit...
warning: NOT FOUND! This is an OPTIONAL/RUNTIME ONLY dependency. Some HPLIP functionality may not function properly.

Checking for dependency: CUPS devel- Common Unix Printing System development files...
error: NOT FOUND! This is a REQUIRED/COMPILE TIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP.

Checking for dependency: CUPS image - CUPS image development files...
error: NOT FOUND! This is a REQUIRED/COMPILE TIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP.

Checking for dependency: DBus - Message bus system...
error: NOT FOUND! This is a REQUIRED dependency. Please make sure that this dependency is installed before installing or running HPLIP.

Checking for dependency: gcc - GNU Project C and C++ Compiler...
OK, found.

Checking for dependency: GhostScript - PostScript and PDF language interpreter and previewer...
OK, found.

Checking for dependency: libcrypto - OpenSSL cryptographic library...
error: NOT FOUND! This is a REQUIRED dependency. Please make sure that this dependency is installed before installing or running HPLIP.

Checking for dependency: libjpeg - JPEG library...
error: NOT FOUND! This is a REQUIRED dependency. Please make sure that this dependency is installed before installing or running HPLIP.

Checking for dependency: libnetsnmp-devel - SNMP networking library development files...
error: NOT FOUND! This is a REQUIRED dependency. Please make sure that this dependency is installed before installing or running HPLIP.

Checking for dependency: libpthread - POSIX threads library...
OK, found.

Checking for dependency: libtool - Library building support services...
error: NOT FOUND! This is a REQUIRED/COMPILE TIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP.

Checking for dependency: libusb - USB library...
error: NOT FOUND! This is a REQUIRED dependency. Please make sure that this dependency is installed before installing or running HPLIP.

Checking for dependency: make - GNU make utility to maintain groups of programs...
OK, found.

Checking for dependency: PIL - Python Imaging Library (required for commandline scanning with hp-scan)...
OK, found.

Checking for dependency: PolicyKit - Administrative policy framework...
OK, found.

Checking for dependency: PyQt 4 DBus - DBus Support for PyQt4...
error: NOT FOUND! This is a REQUIRED/RUNTIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP.

Checking for dependency: Python DBus - Python bindings for DBus...
OK, found.

Checking for dependency: Python devel - Python development files...
error: NOT FOUND! This is a REQUIRED/COMPILE TIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP.

Checking for dependency: Python libnotify - Python bindings for the libnotify Desktop notifications...
OK, found.

Checking for dependency: Python XML libraries...
OK, found.

Checking for dependency: Python 2.3 or greater - Required for fax functionality...
OK, found.

Checking for dependency: Python 2.2 or greater - Python programming language...
OK, found.

Checking for dependency: Reportlab - PDF library for Python...
OK, found.

Checking for dependency: SANE - Scanning library...
OK, found.

Checking for dependency: SANE - Scanning library development files...
error: NOT FOUND! This is a REQUIRED/COMPILE TIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP.

Checking for dependency: scanimage - Shell scanning program...
OK, found.

Checking for dependency: xsane - Graphical scanner frontend for SANE...
warning: NOT FOUND! This is an OPTIONAL/RUNTIME ONLY dependency. Some HPLIP functionality may not function properly.


----------------------
| HPLIP INSTALLATION |
----------------------


Currently installed HPLIP version...
HPLIP 3.11.7 currently installed in '/usr/share/hplip'.

Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf.  Generated from hplip.conf.in by configure.

[hplip]
version=3.11.7

[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/hplip/HP
ppdbase=/usr/share/ppd/hplip
doc=/usr/share/doc/hplip-doc/HTML
icon=no
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv

# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
pp-build=yes
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=yes
foomatic-drv-install=yes
foomatic-ppd-install=yes
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.11.7
restricted-build=no
ui-toolkit=qt4
qt3=no
qt4=yes
policy-kit=yes
hpijs-only-build=no
lite-build=no
udev-acl-rules=yes
hpcups-only-build=no
hpijs-only-build=no


Current contents of '/var/lib/hp/hplip.state' file:
# hplip.state - HPLIP runtime persistent variables. 

[plugin]
installed=0
eula=0



Current contents of '~/.hplip/hplip.conf' file:
error: Could not access file: File o directory non esistente

--------------------------
| DISCOVERED USB DEVICES |
--------------------------

No devices found.

---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------

 
lpstat
------
Type: Unknown
Device URI: No destinations added.


----------------------
| SANE CONFIGURATION |
----------------------

'hpaio' in '/etc/sane.d/dll.conf'...
'hpaio' in '/etc/sane.d/dll.d/hplip'...
OK, found. SANE backend 'hpaio' is properly set up.

Checking output of 'scanimage -L'...
 
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).


---------------------
| PYTHON EXTENSIONS |
---------------------

Checking 'cupsext' CUPS extension...
OK, found.

Checking 'pcardext' Photocard extension...
OK, found.

Checking 'hpmudext' I/O extension...
OK, found.

Checking 'scanext' SANE scanning extension...
OK, found.


 
---------------
| USER GROUPS |
---------------

root

error: User needs to be member of group 'lp' to enable print, scan & fax.
error: User needs to be member of group 'lpadmin' to manage printers.

-----------
| SUMMARY |
-----------

error: 13 errors and/or warnings.

Please refer to the installation instructions at:
http://hplip.sourceforge.net/install/index.html


Done.

[bingel]

Senti scusa ma usi un adattatore parallelo-usb per caso?

Mi spiego meglio. Il connettore che usi per attaccare la stampante al pc è un adattatore che ti converte il connettore originale della stampante (cavo parallelo) in un connettore usb?

In tal caso avresti fatto bene a specificarlo fin da subito.

Altra domanda:

è la prima volta che installi questa stampante su linux o con altre versioni ti funzionava?

In ogni caso, con la stampante accesa e il cavo collegato, prova a postare l'output di questi comandi:

Codice: Seleziona tutto

ls /dev/usb*
lsmod | grep usb

e inoltre prova a rieseguire il comando "hp-setup" scegliendo come porta quella parallela (par) e non la usb.