Pagina 1 di 2
Mouse non riconosciuto
Inviato: domenica 13 novembre 2011, 23:13
da Tux1
Salve a tutti, ho un mouse trust "ami mouse scroll pro" excellence series (non ottico, a "palla") che quando collego ad Ubuntu tramite la porta ps/2 (quindi non usb) non viene nemmeno riconosciuto.
Tramite il comando lsusb da terminale non mi spunta nemmeno la periferica.
Mi interesserebbe farlo partire e quindi poterlo usare dato che è un mouse con una precisione ed una ergonomicità da far invidia a migliaia di altri mouse.
Idee?????
Grazie.
Re: Mouse non riconosciuto
Inviato: domenica 13 novembre 2011, 23:25
da Alka-Seltzer PLUS
Ciao !
Dato che non è usb perché hai provato a trovarlo tra le periferiche usb ?
Io piuttosto proverei con:
Ora, se non ricordo male, le periferiche che si collegano tramite porta ps/2 andrebbero collegate prima dell' accensione del computer: hai già provato a procedere in tal senso ?
Re: Mouse non riconosciuto
Inviato: domenica 13 novembre 2011, 23:35
da Tux1
Ma certo!!!! vero, le periferiche ps/2 si collegano a pc spento!........grazie per l'idea, più tardi, penso domani faccio sapere com'è finita, al momento ho da fare
.
Re: Mouse non riconosciuto
Inviato: lunedì 14 novembre 2011, 16:35
da Tux1
Purtoppo mettendo il mouse prima dell'accensione non parte lo stesso......
Questo è il risultato del comando "sudo lshw":
Codice: Seleziona tutto
description: Desktop Computer
product: To Be Filled By O.E.M.
vendor: To Be Filled By O.E.M.
version: To Be Filled By O.E.M.
serial: To Be Filled By O.E.M.
width: 32 bits
capabilities: smbios-2.4 dmi-2.4 smp-1.4 smp
configuration: boot=normal chassis=desktop cpus=2 uuid=00020003-0004-0005-0006-000700080009
*-core
description: Motherboard
product: N68-S
vendor: ASRock
physical id: 0
*-firmware
description: BIOS
vendor: American Megatrends Inc.
physical id: 0
version: P1.50 (07/17/2009)
size: 64KiB
capacity: 448KiB
capabilities: pci upgrade shadowing cdboot bootselect socketedrom edd int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer int10video acpi usb ls120boot zipboot biosbootspecification netboot
*-cpu:0
description: CPU
product: AMD Athlon(tm) 5000 Dual-Core Processor
vendor: Advanced Micro Devices [AMD]
physical id: 3
bus info: cpu@0
version: 15.4.2
serial: To Be Filled By O.E.M.
slot: CPUSocket
size: 2200MHz
capacity: 2200MHz
width: 64 bits
clock: 200MHz
capabilities: boot fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp x86-64 3dnowext 3dnow constant_tsc nonstop_tsc extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt npt lbrv svm_lock nrip_save cpufreq
*-cache:0
description: L1 cache
physical id: 5
slot: L1-Cache
size: 128KiB
capacity: 256KiB
capabilities: pipeline-burst internal varies data
*-cache:1
description: L2 cache
physical id: 6
slot: L2-Cache
size: 512KiB
capacity: 1MiB
capabilities: pipeline-burst internal varies unified
*-memory:0
description: System Memory
physical id: e
slot: System board or motherboard
size: 2GiB
*-bank:0
description: DIMM DDR2 Synchronous 533 MHz (1.9 ns)
product: PartNum0
vendor: Manufacturer0
physical id: 0
serial: SerNum0
slot: DIMM0
size: 2GiB
width: 64 bits
clock: 533MHz (1.9ns)
*-bank:1
description: DIMM [empty]
product: PartNum1
vendor: Manufacturer1
physical id: 1
serial: SerNum1
slot: DIMM1
*-cpu:1
physical id: 4
bus info: cpu@1
version: 15.4.2
size: 800MHz
capacity: 800MHz
capabilities: cpufreq
*-cache:0
description: L1 cache
physical id: 0
size: 128KiB
*-cache:1
description: L2 cache
physical id: 1
size: 512KiB
*-memory:1 UNCLAIMED
description: RAM memory
product: MCP61 LPC Bridge
vendor: nVidia Corporation
physical id: a
bus info: pci@0000:00:00.0
version: a1
width: 32 bits
clock: 66MHz (15.2ns)
capabilities: ht bus_master cap_list
configuration: latency=0
*-isa
description: ISA bridge
product: MCP61 LPC Bridge
vendor: nVidia Corporation
physical id: 1
bus info: pci@0000:00:01.0
version: a2
width: 32 bits
clock: 66MHz
capabilities: isa bus_master
configuration: latency=0
resources: ioport:900(size=256)
*-serial
description: SMBus
product: MCP61 SMBus
vendor: nVidia Corporation
physical id: 1.1
bus info: pci@0000:00:01.1
version: a2
width: 32 bits
clock: 66MHz
capabilities: pm cap_list
configuration: driver=nForce2_smbus latency=0
resources: irq:11 ioport:ec00(size=64) ioport:600(size=64) ioport:700(size=64)
*-memory:2 UNCLAIMED
description: RAM memory
product: MCP61 Memory Controller
vendor: nVidia Corporation
physical id: 1.2
bus info: pci@0000:00:01.2
version: a2
width: 32 bits
clock: 66MHz (15.2ns)
configuration: latency=0
*-usb:0
description: USB Controller
product: MCP61 USB Controller
vendor: nVidia Corporation
physical id: 2
bus info: pci@0000:00:02.0
version: a3
width: 32 bits
clock: 66MHz
capabilities: pm ohci bus_master cap_list
configuration: driver=ohci_hcd latency=0 maxlatency=1 mingnt=3
resources: irq:20 memory:fbfff000-fbffffff
*-usb:1
description: USB Controller
product: MCP61 USB Controller
vendor: nVidia Corporation
physical id: 2.1
bus info: pci@0000:00:02.1
version: a3
width: 32 bits
clock: 66MHz
capabilities: debug pm ehci bus_master cap_list
configuration: driver=ehci_hcd latency=0 maxlatency=1 mingnt=3
resources: irq:21 memory:fbffec00-fbffecff
*-pci:0
description: PCI bridge
product: MCP61 PCI bridge
vendor: nVidia Corporation
physical id: 100
bus info: pci@0000:00:04.0
version: a1
width: 32 bits
clock: 66MHz
capabilities: pci ht subtractive_decode bus_master cap_list
*-multimedia
description: Audio device
product: MCP61 High Definition Audio
vendor: nVidia Corporation
physical id: 5
bus info: pci@0000:00:05.0
version: a2
width: 32 bits
clock: 66MHz
capabilities: pm msi ht bus_master cap_list
configuration: driver=HDA Intel latency=0 maxlatency=5 mingnt=2
resources: irq:22 memory:fbff8000-fbffbfff
*-ide:0
description: IDE interface
product: MCP61 IDE
vendor: nVidia Corporation
physical id: 6
bus info: pci@0000:00:06.0
version: a2
width: 32 bits
clock: 66MHz
capabilities: ide pm bus_master cap_list
configuration: driver=pata_amd latency=0 maxlatency=1 mingnt=3
resources: irq:0 ioport:1f0(size=8) ioport:3f6 ioport:170(size=8) ioport:376 ioport:ffa0(size=16)
*-bridge
description: Ethernet interface
product: MCP61 Ethernet
vendor: nVidia Corporation
physical id: 7
bus info: pci@0000:00:07.0
logical name: eth0
version: a2
serial: 00:19:66:ff:13:d3
capacity: 100000000
width: 32 bits
clock: 66MHz
capabilities: bridge pm msi ht bus_master cap_list ethernet physical mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=forcedeth driverversion=0.64 latency=0 link=no maxlatency=20 mingnt=1 multicast=yes port=MII
resources: irq:43 memory:fbffd000-fbffdfff ioport:e480(size=8)
*-ide:1
description: IDE interface
product: MCP61 SATA Controller
vendor: nVidia Corporation
physical id: 8
bus info: pci@0000:00:08.0
logical name: scsi3
logical name: scsi4
version: a2
width: 32 bits
clock: 66MHz
capabilities: ide pm msi ht bus_master cap_list emulated
configuration: driver=sata_nv latency=0 maxlatency=1 mingnt=3
resources: irq:23 ioport:e400(size=8) ioport:e080(size=4) ioport:e000(size=8) ioport:dc00(size=4) ioport:d880(size=16) memory:fbffc000-fbffcfff
*-disk
description: ATA Disk
product: WDC WD5000AAKS-0
vendor: Western Digital
physical id: 0
bus info: scsi@3:0.0.0
logical name: /dev/sda
version: 01.0
serial: WD-WCAYU0290237
size: 465GiB (500GB)
capabilities: partitioned partitioned:dos
configuration: ansiversion=5 signature=000405cf
*-volume:0
description: EXT4 volume
vendor: Linux
physical id: 1
bus info: scsi@3:0.0.0,1
logical name: /dev/sda1
logical name: /
version: 1.0
serial: bed3eb24-70d6-44ec-93fb-1d4c310e7438
size: 459GiB
capacity: 459GiB
capabilities: primary bootable journaled extended_attributes large_files huge_files dir_nlink extents ext4 ext2 initialized
configuration: created=2011-07-14 00:52:54 filesystem=ext4 lastmountpoint=/m�Ҁ���8Y�����P�!�8Y��@�(���(���������h�Y�!�} modified=2011-11-10 17:28:35 mount.fstype=ext4 mount.options=rw,relatime,errors=remount-ro,barrier=1,data=ordered mounted=2011-11-14 16:08:04 state=mounted
*-volume:1
description: Extended partition
physical id: 2
bus info: scsi@3:0.0.0,2
logical name: /dev/sda2
size: 5998MiB
capacity: 5998MiB
capabilities: primary extended partitioned partitioned:extended
*-logicalvolume
description: Linux swap / Solaris partition
physical id: 5
logical name: /dev/sda5
capacity: 5998MiB
capabilities: nofs
*-cdrom
description: DVD-RAM writer
product: DVDRAM GH22NS40
vendor: HL-DT-ST
physical id: 1
bus info: scsi@4:0.0.0
logical name: /dev/cdrom
logical name: /dev/cdrw
logical name: /dev/dvd
logical name: /dev/dvdrw
logical name: /dev/scd0
logical name: /dev/sr0
version: NL02
capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram
configuration: ansiversion=5 status=nodisc
*-ide:2
description: IDE interface
product: MCP61 SATA Controller
vendor: nVidia Corporation
physical id: 8.1
bus info: pci@0000:00:08.1
version: a2
width: 32 bits
clock: 66MHz
capabilities: ide pm msi ht bus_master cap_list
configuration: driver=sata_nv latency=0 maxlatency=1 mingnt=3
resources: irq:22 ioport:d800(size=8) ioport:d480(size=4) ioport:d400(size=8) ioport:d080(size=4) ioport:d000(size=16) memory:fbff7000-fbff7fff
*-pci:1
description: PCI bridge
product: MCP61 PCI Express bridge
vendor: nVidia Corporation
physical id: 9
bus info: pci@0000:00:09.0
version: a2
width: 32 bits
clock: 33MHz
capabilities: pci pm msi ht pciexpress normal_decode bus_master cap_list
configuration: driver=pcieport
resources: irq:40
*-pci:2
description: PCI bridge
product: MCP61 PCI Express bridge
vendor: nVidia Corporation
physical id: b
bus info: pci@0000:00:0b.0
version: a2
width: 32 bits
clock: 33MHz
capabilities: pci pm msi ht pciexpress normal_decode bus_master cap_list
configuration: driver=pcieport
resources: irq:41
*-pci:3
description: PCI bridge
product: MCP61 PCI Express bridge
vendor: nVidia Corporation
physical id: c
bus info: pci@0000:00:0c.0
version: a2
width: 32 bits
clock: 33MHz
capabilities: pci pm msi ht pciexpress normal_decode bus_master cap_list
configuration: driver=pcieport
resources: irq:42
*-display
description: VGA compatible controller
product: C61 [GeForce 7025 / nForce 630a]
vendor: nVidia Corporation
physical id: d
bus info: pci@0000:00:0d.0
version: a2
width: 64 bits
clock: 66MHz
capabilities: pm msi vga_controller bus_master cap_list rom
configuration: driver=nvidia latency=0
resources: irq:21 memory:fa000000-faffffff memory:e0000000-efffffff memory:f9000000-f9ffffff memory:fbfc0000-fbfdffff
*-pci:4
description: Host bridge
product: Family 10h Processor HyperTransport Configuration
vendor: Advanced Micro Devices [AMD]
physical id: 101
bus info: pci@0000:00:18.0
version: 00
width: 32 bits
clock: 33MHz
*-pci:5
description: Host bridge
product: Family 10h Processor Address Map
vendor: Advanced Micro Devices [AMD]
physical id: 102
bus info: pci@0000:00:18.1
version: 00
width: 32 bits
clock: 33MHz
*-pci:6
description: Host bridge
product: Family 10h Processor DRAM Controller
vendor: Advanced Micro Devices [AMD]
physical id: 103
bus info: pci@0000:00:18.2
version: 00
width: 32 bits
clock: 33MHz
*-pci:7
description: Host bridge
product: Family 10h Processor Miscellaneous Control
vendor: Advanced Micro Devices [AMD]
physical id: 104
bus info: pci@0000:00:18.3
version: 00
width: 32 bits
clock: 33MHz
*-pci:8
description: Host bridge
product: Family 10h Processor Link Control
vendor: Advanced Micro Devices [AMD]
physical id: 105
bus info: pci@0000:00:18.4
version: 00
width: 32 bits
clock: 33MHz
*-scsi
physical id: f
bus info: usb@1:3
logical name: scsi9
capabilities: emulated scsi-host
configuration: driver=usb-storage
*-disk
description: SCSI Disk
physical id: 0.0.0
bus info: scsi@9:0.0.0
logical name: /dev/sdb
*-network
description: Wireless interface
physical id: 1
bus info: usb@1:5
logical name: wlan0
serial: 00:26:5a:06:c7:0b
capabilities: ethernet physical wireless
configuration: broadcast=yes driver=rt73usb driverversion=2.6.35-30-generic firmware=N/A ip=192.168.1.4 link=yes multicast=yes wireless=IEEE 802.11bg
Re: Mouse non riconosciuto
Inviato: martedì 15 novembre 2011, 11:43
da Alka-Seltzer PLUS
Hai già provato il mouse in un altro computer ? Ed un altro mouse in questo ?
Re: Mouse non riconosciuto
Inviato: martedì 15 novembre 2011, 11:53
da magozurlinux
Da terminale col mouse usb inserito, postami questi comandi:
Re: Mouse non riconosciuto
Inviato: martedì 15 novembre 2011, 13:20
da Tux1
Il mouse non è usb, è con la porta ps/2 come ho già detto.
cmq ho già provato su win e funziona.
Re: Mouse non riconosciuto
Inviato: martedì 15 novembre 2011, 14:12
da Janvitus
@Tux1 prossima volta usa la funzione "inserisci codice" quando riporti cose lunghe.
Re: Mouse non riconosciuto
Inviato: martedì 15 novembre 2011, 19:02
da magozurlinux
Fai questa prova;
premi Ctrl Alt F1, entrerai nel terminale in modo testo, inserisci username e password, poi dai questi comandi:
Da terminale postami questo comando:
Re: Mouse non riconosciuto
Inviato: martedì 15 novembre 2011, 21:18
da Tux1
Grazie per la dritta janvitus.
Comunque digitando il comando da postare esce questo
Codice: Seleziona tutto
[ 2.753616] input: USB Optical Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-6/2-6:1.0/input/input3
[ 2.753772] generic-usb 0003:1BCF:0007.0001: input,hiddev96,hidraw0: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:00:02.0-6/input0
salvo@salvo-desktop:~$ dmesg | grep Mouse
[ 2.753616] input: USB Optical Mouse as /devices/pci0000:00/0000:00:02.0/usb2
Re: Mouse non riconosciuto
Inviato: giovedì 17 novembre 2011, 17:22
da Tux1
Idee per farlo partire?
Re: Mouse non riconosciuto
Inviato: giovedì 17 novembre 2011, 18:28
da magozurlinux
[ 2.753616] input: USB Optical Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-6/2-6:1.0/input/input3
[ 2.753772] generic-usb 0003:1BCF:0007.0001: input,hiddev96,hidraw0: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:00:02.0-6/input0
salvo@salvo-desktop:~$ dmesg | grep Mouse
[ 2.753616] input: USB Optical Mouse as /devices/pci0000:00/0000:00:02.0/usb2
Hai detto che il mouse è PS/2; il comando che mi hai postato dovevi darlo col mouse PS/2 e non usb. ;D
[willy@localhost ~]$ dmesg | grep Mouse
[ 2.382730] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4
il mio mouse è usb con adattatore usb - PS/2.
Re: Mouse non riconosciuto
Inviato: giovedì 17 novembre 2011, 18:45
da magozurlinux
Un modo per farlo funzionare è quello di aggiungere le righe per il mouse dentro il file
/etc/X11/xorg.conf.
da terminale dai questo comando:
il file sarà vuoto; aggiungi queste righe:
Codice: Seleziona tutto
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "Buttons" "5"
Option "ZAxisMapping" "4 5"
Option "CorePointer"
Option "SendCoreEvents" "true"
EndSection
salva ed esci dall'editor di testo.
Riavvia il pc.
Re: Mouse non riconosciuto
Inviato: venerdì 18 novembre 2011, 16:56
da Tux1
Cmq il file non è vuoto, all'interno sono presenti un bel pò di impostazioni, dove lo metto? te lo posto:
Codice: Seleziona tutto
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 285.05.09 (buildd@lemon) Thu Oct 13 04:08:37 UTC 2011
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "Xinerama" "0"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
# HorizSync source: builtin, VertRefresh source: builtin
Identifier "Monitor0"
VendorName "Unknown"
ModelName "CRT-0"
HorizSync 30.0 - 85.0
VertRefresh 50.0 - 150.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 7025 / nForce 630a"
EndSection
Section "Screen"
# Removed Option "metamodes" "1152x864 +0+0"
# Removed Option "metamodes" "1280x1024 +0+0; 1280x960 +0+0; 1024x768 +0+0"
# Removed Option "metamodes" "1280x1024_75 +0+0; 1280x1024 +0+0; 1280x960 +0+0; 1024x768 +0+0"
# Removed Option "metamodes" "1600x1024 +0+0; 1280x1024 +0+0; 1280x960 +0+0; 1024x768 +0+0"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "0"
Option "TwinViewXineramaInfoOrder" "CRT-0"
Option "metamodes" "1440x900 +0+0; 1024x768 +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Re: Mouse non riconosciuto
Inviato: venerdì 18 novembre 2011, 18:28
da magozurlinux
Hai già i parametri per il mouse in
/etc/X11/xorg.conf:
Codice: Seleziona tutto
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
prova a modificare con questi parametri (evidenziati in rosso):
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mouse0"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
salva ed esci dall'editor di testo.
Riavvia il pc.
Re: Mouse non riconosciuto
Inviato: venerdì 18 novembre 2011, 22:15
da Tux1
Fatto, ma non va lo stesso, ho pure provato a scollegare l'altro mouse usb e riavviare il pc ma niente.
Re: Mouse non riconosciuto
Inviato: sabato 19 novembre 2011, 12:54
da magozurlinux
Fai questa prova col mouse PS/2 e usb inseriti;
premi Ctrl Alt F1, entrerai nel terminale in modo testo, inserisci username e password, poi dai questi comandi:
Da terminale postami questo comando:
Re: Mouse non riconosciuto
Inviato: domenica 20 novembre 2011, 14:05
da Tux1
Non posso fare sudo gdm restart o quello che è perché mi si impalla il pc e lo devo riavviare.
Re: Mouse non riconosciuto
Inviato: domenica 20 novembre 2011, 14:08
da Tux1
Cmq l'ultimo comando da questo:
Codice: Seleziona tutto
[ 10.708902] input: USB Optical Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-6/2-6:1.0/input/input3
[ 10.709054] generic-usb 0003:1BCF:0007.0001: input,hiddev96,hidraw0: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:00:02.0-6/input0
[ 14.604385] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input4
Re: Mouse non riconosciuto
Inviato: domenica 20 novembre 2011, 18:21
da magozurlinux
[ 10.708902] input: USB Optical Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-6/2-6:1.0/input/input3
[ 10.709054] generic-usb 0003:1BCF:0007.0001: input,hiddev96,hidraw0: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:00:02.0-6/input0
[ 14.604385] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input4
quello evidenziato in rosso è il tuo mouse PS/2 correttamente riconosciuto.