Forum Ubuntu-it

ciao
ho aggiornato il sistema alle 11.10 e tanto per cambiare ho problemi con la chiavetta wireless

mi connetto con questo
modello della Digicom USB WAVE 300C

e dopo il riavvio non me la rileva piu.

lspci
00:00.0 Host bridge: VIA Technologies, Inc. VT8385 [K8T800 AGP] Host Bridge (rev 01)
00:01.0 PCI bridge: VIA Technologies, Inc. VT8237/8251 PCI bridge [K8M890/K8T800/K8T890 South]
00:09.0 Ethernet controller: Accton Technology Corporation SMC2-1211TX (rev 10)
00:0a.0 Communication controller: Conexant Systems, Inc. HCF 56k Data/Fax Modem (rev 08)
00:0f.0 RAID bus controller: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80)
00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T890 South]
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60)
00:13.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:00.0 VGA compatible controller: ATI Technologies Inc RV280 [Radeon 9200 PRO] (rev 01)
01:00.1 Display controller: ATI Technologies Inc RV280 [Radeon 9200 PRO] (Secondary) (rev 01)
fulvio@fulvio-desktop:~$ lspci
00:00.0 Host bridge: VIA Technologies, Inc. VT8385 [K8T800 AGP] Host Bridge (rev 01)
00:01.0 PCI bridge: VIA Technologies, Inc. VT8237/8251 PCI bridge [K8M890/K8T800/K8T890 South]
00:09.0 Ethernet controller: Accton Technology Corporation SMC2-1211TX (rev 10)
00:0a.0 Communication controller: Conexant Systems, Inc. HCF 56k Data/Fax Modem (rev 08)
00:0f.0 RAID bus controller: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80)
00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T890 South]
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60)
00:13.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:00.0 VGA compatible controller: ATI Technologies Inc RV280 [Radeon 9200 PRO] (rev 01)
01:00.1 Display controller: ATI Technologies Inc RV280 [Radeon 9200 PRO] (Secondary) (rev 01)



lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 148f:3072 Ralink Technology, Corp. RT3072 Wireless Adapter
Bus 001 Device 004: ID 0c45:624f Microdia PC Camera (SN9C201 + OV9650)
Bus 002 Device 002: ID 04f3:0103 Elan Microelectronics Corp.


iwconfig
lo        no wireless extensions.

eth0      no wireless extensions.

eth1      no wireless extensions.


sudo lshw -C network
  *-network:0           
      description: Ethernet interface
      product: SMC2-1211TX
      vendor: Accton Technology Corporation
      physical id: 9
      bus info: pci@0000:00:09.0
      logical name: eth0
      version: 10
      serial: 00:10:b5:d6:79:34
      size: 10Mbit/s
      capacity: 100Mbit/s
      width: 32 bits
      clock: 33MHz
      capabilities: pm bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
      configuration: autonegotiation=on broadcast=yes driver=8139too driverversion=0.9.28 duplex=half latency=64 link=no maxlatency=64 mingnt=32 multicast=yes port=MII speed=10Mbit/s
      resources: irq:17 ioport:b000(size=256) memory:eb010000-eb0100ff memory:40000000-4001ffff
  *-network:1
      description: Ethernet interface
      product: RTL-8139/8139C/8139C+
      vendor: Realtek Semiconductor Co., Ltd.
      physical id: 13
      bus info: pci@0000:00:13.0
      logical name: eth1
      version: 10
      serial: 00:0f:ea:7b:f3:20
      size: 100Mbit/s
      capacity: 100Mbit/s
      width: 32 bits
      clock: 33MHz
      capabilities: pm bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
      configuration: autonegotiation=on broadcast=yes driver=8139too driverversion=0.9.28 duplex=full ip=192.168.1.101 latency=64 link=yes maxlatency=64 mingnt=32 multicast=yes port=MII speed=100Mbit/s
      resources: irq:18 ioport:e800(size=256) memory:eb012000-eb0120ff


non mi rileva proprio la chiavetta , potete aiutarmi?

solo con
lsusb

mi rileva qualcosa madi altro non so come attivarla

nessuno che puo' aiutarmi?

>:(  vi prego

Uhm ... brutte notizie temo ... da una veloce ricerca mi sa che è un problema di driver per il kernel 3.x.

Prova a guardare tu su Internet usando l'ID del device ( 148f:3072 ). Sul sito della Ralink c'è una versione vecchia di driver. Il codice sembrerebbe essere equivalente a RT2870.

Anche qui c'è qualcosa ma vecchio

ciao,
grazie per il suggerimento
provato la soluzione proposta ma nulla di fatto


provato anche a cercare qualcosa ma non trovo nulla

possibile che ad ogni aggiornamento devo cambiare chiavetta?


non mi sembra logico

Inserisci al chiavetta usb e da terminale postami questi comandi:

dmesg | grep usb
[    0.104385] usbcore: registered new interface driver usbfs
[    0.104399] usbcore: registered new interface driver hub
[    0.104435] usbcore: registered new device driver usb
[    0.780068] usb 1-4: new high speed USB device number 3 using ehci_hcd
[    1.040026] usb 1-5: new high speed USB device number 4 using ehci_hcd
[    1.416008] usb 2-1: new low speed USB device number 2 using uhci_hcd
[    1.596686] input: HID 04f3:0103 as /devices/pci0000:00/0000:00:10.0/usb2/2-1/2-1:1.0/input/input2
[    1.596871] generic-usb 0003:04F3:0103.0001: input,hidraw0: USB HID v1.10 Keyboard [HID 04f3:0103] on usb-0000:00:10.0-1/input0
[    1.620457] input: HID 04f3:0103 as /devices/pci0000:00/0000:00:10.0/usb2/2-1/2-1:1.1/input/input3
[    1.620642] generic-usb 0003:04F3:0103.0002: input,hidraw1: USB HID v1.10 Device [HID 04f3:0103] on usb-0000:00:10.0-1/input1
[    1.620908] usbcore: registered new interface driver usbhid
[    1.620910] usbhid: USB HID core driver
[   20.046815] usbcore: registered new interface driver ndiswrapper
[   21.731587] input: sn9c20x as /devices/pci0000:00/0000:00:10.4/usb1/1-5/input/input4
[   21.733375] usbcore: registered new interface driver sn9c20x
[   51.600944] usb 1-4: USB disconnect, device number 3
[   56.732031] usb 1-4: new high speed USB device number 5 using ehci_hcd




dmesg | grep rt
[    0.000000] KERNEL supported cpus:
[    0.000000] Aperture from AGP @ d0000000 old size 32 MB
[    0.000000] Aperture from AGP @ d0000000 size 128 MB (APSIZE f20)
[    0.000000] Scanning NUMA topology in Northbridge 24
[    0.000000] Movable zone start PFN for each node
[    0.000000] ACPI: PM-Timer IO Port: 0x4008
[    0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:bec00000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] Checking aperture...
[    0.000000] Aperture from AGP @ d0000000 old size 32 MB
[    0.000000] Aperture from AGP @ d0000000 size 128 MB (APSIZE f20)
[    0.000000] Node 0: aperture @ d0000000 size 128 MB
[    0.008251] mce: CPU supports 5 MCE banks
[    0.068003] node 0 link 0: io port [1000, fffff]
[    0.073188] ACPI: (supports S0 S1 S4 S5)
[    0.077722] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[    0.078046] pci 0000:00:01.0: supports D1
[    0.078133] pci 0000:00:09.0: supports D1 D2
[    0.078135] pci 0000:00:09.0: PME# supported from D1 D2 D3hot D3cold
[    0.078214] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[    0.078466] pci 0000:00:10.0: supports D1 D2
[    0.078468] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.078545] pci 0000:00:10.1: supports D1 D2
[    0.078548] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.078626] pci 0000:00:10.2: supports D1 D2
[    0.078629] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.078705] pci 0000:00:10.3: supports D1 D2
[    0.078708] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
[    0.078784] pci 0000:00:10.4: supports D1 D2
[    0.078787] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
[    0.078948] pci 0000:00:11.5: supports D1 D2
[    0.079030] pci 0000:00:13.0: supports D1 D2
[    0.079033] pci 0000:00:13.0: PME# supported from D1 D2 D3hot D3cold
[    0.079197] pci 0000:01:00.0: supports D1 D2
[    0.079249] pci 0000:01:00.1: supports D1 D2
[    0.079556]  pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
[    0.124307] agpgart-amd64 0000:00:00.0: AGP bridge [1106/3188]
[    0.140236] agpgart-amd64 0000:00:00.0: AGP aperture is 128M @ 0xd0000000
[    0.226835] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.392411] Linux agpgart interface v0.103
[    0.400582] ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using IRQ 20
[    0.401659] ACPI: PCI Interrupt Link [ALKB] BIOS reported IRQ 0, using IRQ 21
[    0.412274] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00
[    0.412552] hub 1-0:1.0: 8 ports detected
[    0.416591] hub 2-0:1.0: 2 ports detected
[    0.420609] hub 3-0:1.0: 2 ports detected
[    0.420983] hub 4-0:1.0: 2 ports detected
[    0.428585] hub 5-0:1.0: 2 ports detected
[    0.429208] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.429216] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.429426] rtc_cmos 00:05: RTC can wake from S4
[    0.429562] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    0.429610] rtc0: alarms up to one year, y3k, 242 bytes nvram
[    0.638929] rtc_cmos 00:05: setting system clock to 2011-11-24 18:43:12 UTC (1322160192)
[    0.679782] udevd[84]: starting version 173
[    1.245046] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   19.687987] udevd[324]: starting version 173
[   20.034312] parport_pc 00:0b: reported by Plug and Play ACPI
[   20.034357] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[   20.124710] lp0: using parport0 (interrupt-driven).
[   20.162182] gameport gameport0: NS558 PnP Gameport is pnp00:0d/gameport0, io 0x201, speed 853kHz
[   22.176178] init: apport pre-start process (935) terminated with status 1
[   22.228831] init: apport post-stop process (976) terminated with status 1
[   22.434353] ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 0, using IRQ 22
[   22.520608] ppdev: user-space parallel port driver
[   26.446518] init: plymouth-stop pre-start process (1338) terminated with status 1


ah dimenticavo domani devo partire e rientro domenica sera leggo il forum ma non saro' al pc per poter effettuare prove.. grazie per l'aiuto in anticipo

Prego, di nulla.

Dagli outputs che hai postato non c'è traccia del modulo driver per la tua chiavetta.

Segui questa discussione, è per Ubuntu 11.04, va bene anche per Ubuntu 11.10:

http://www.sefi.it/linux/ubuntu-11-04-p ... ifi-rt3072

eccomi,
ciao,

la discussione da te segnalata me la ha postata anche theface piu' sopra, ho gia' provato a seguire la procedura ma senza risultato

altre idee?

Scarica e copia nella tua home il nuovo firmware rt2870.bin da quì:

https://launchpad.net/ubuntu/oneiric/+s ... .53.tar.gz

Da terminale dai questi comandi:
Riavvia il pc.

ho provato  ed istallato ,
cambiato nulla al riavvio nessuna novita tutto come prima

L'adattatore Digicom USB WAVE 300C non funziona più correttamente dovuto ad un bug nel kernel di Ubuntu:

https://bugs.launchpad.net/ubuntu/+sour ... bug/770232

hai un consiglio da darmi per una chiavetta che non abbia problemi ad ogni aggiornamento di versione?

Io uso una D-Link DWL-G122 con chipset Ralink RT73 H/W: C1 F/W: 3.30(E); l'ho provata dalla versione di Ubuntu 8.04 alla 11.10 e con altre distro Linux, funziona "Out of the box", non devo installare alcun pacchetto driver; l'inserisco, seleziono al rete wireless, inserisco la password e sono già connesso ad Internet.

Nella confezione della D-Link c'è il logo del Pinguino colla scritta Linux support; il consiglio che posso darti è di controllare nella confezione che ci sia scritto supportata da Linux oppure oltre Windows XP,Vista,7, Mac OS X, Linux; così vai sul sicuro.

Ciao