Forum Ubuntu-it

Come da oggetto il mio netbook Fujitsu che uso da tempo con Ubuntu 10.04 non mi riconosce una microSD SanDisk di cui sono sicuro che su un altro pc funziona.


Ho provato a googlare nella speranza di trovare qualche soluzione ma per il momento nulla

Da terminale postami questi comandi:

paolo@paolo-laptop:~$ lspci
00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 03)
00:01.0 PCI bridge: Intel Corporation Mobile 915GM/PM Express PCI Express Root Port (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 04)
00:1c.1 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 (rev 04)
00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 04)
00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 04)
00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 04)
00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 04)
00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 04)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d4)
00:1e.2 Multimedia audio controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 04)
00:1e.3 Modem: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Modem Controller (rev 04)
00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 04)
00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 82801FBM (ICH6M) SATA Controller (rev 04)
00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 04)
01:00.0 VGA compatible controller: ATI Technologies Inc M24 1P [Radeon Mobility X600]
02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5751M Gigabit Ethernet PCI Express (rev 11)
06:03.0 CardBus bridge: O2 Micro, Inc. OZ711M1/MC1 4-in-1 MemoryCardBus Controller (rev 20)
06:03.1 CardBus bridge: O2 Micro, Inc. OZ711M1/MC1 4-in-1 MemoryCardBus Controller (rev 20)
06:03.2 System peripheral: O2 Micro, Inc. OZ711Mx 4-in-1 MemoryCardBus Accelerator
06:05.0 Network controller: Intel Corporation PRO/Wireless 2200BG [Calexico2] Network Connection (rev 05)
06:06.0 FireWire (IEEE 1394): Texas Instruments TSB43AB21 IEEE-1394a-2000 Controller (PHY/Link)
paolo@paolo-laptop:~$ lsusb
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 002: ID 044e:3001 Alps Electric Co., Ltd UGTZ4 Bluetooth
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
paolo@paolo-laptop:~$ dmesg | grep usb
[ 0.157397] usbcore: registered new interface driver usbfs
[ 0.157426] usbcore: registered new interface driver hub
[ 0.157486] usbcore: registered new device driver usb
[ 0.409050] usb usb1: configuration #1 chosen from 1 choice
[ 0.409709] usb usb2: configuration #1 chosen from 1 choice
[ 0.410201] usb usb3: configuration #1 chosen from 1 choice
[ 0.410703] usb usb4: configuration #1 chosen from 1 choice
[ 0.411190] usb usb5: configuration #1 chosen from 1 choice
[ 1.160052] usb 4-1: new full speed USB device using uhci_hcd and address 2
[ 1.356687] usb 4-1: configuration #1 chosen from 1 choice
[ 26.254664] usbcore: registered new interface driver ndiswrapper
[ 26.334117] usbcore: registered new interface driver btusb
paolo@paolo-laptop:~$

06:03.0 CardBus bridge: O2 Micro, Inc. OZ711M1/MC1 4-in-1 MemoryCardBus Controller (rev 20)
06:03.1 CardBus bridge: O2 Micro, Inc. OZ711M1/MC1 4-in-1 MemoryCardBus Controller (rev 20)
06:03.2 System peripheral: O2 Micro, Inc. OZ711Mx 4-in-1 MemoryCardBus Accelerator

Il tuo card-reader ha come chipset Micro.

Avvia Ubuntu colla SD inserita e da terminale postami questi comandi:

Eccomi:


paolo@paolo-laptop:~$ dmesg | grep scsi
[ 0.208033] scsi0 : ata_piix
[ 0.208157] scsi1 : ata_piix
[ 0.775055] scsi 0:0:0:0: CD-ROM _NEC DVD+-RW ND-6650A 1.5A PQ: 0 ANSI: 5
[ 0.801067] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 0.801195] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 0.801265] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 1.037740] scsi2 : ahci
[ 1.037898] scsi3 : ahci
[ 1.038004] scsi4 : ahci
[ 1.038097] scsi5 : ahci
[ 1.404178] scsi 2:0:0:0: Direct-Access ATA FUJITSU MHV2080B 0000 PQ: 0 ANSI: 5
[ 1.404325] sd 2:0:0:0: Attached scsi generic sg1 type 0
paolo@paolo-laptop:~$ udevadm info -a -p /sys/block/sdb
device path not found
paolo@paolo-laptop:~$