[RISOLTO] Scanner: invalid argument [DCP-7057]

Riconoscimento, installazione e configurazione delle periferiche.
Avatar utente
Beekeeper
Prode Principiante
Messaggi: 27
Iscrizione: lunedì 10 luglio 2006, 10:22
Desktop: Unity
Distribuzione: Ubuntu 12.04 LTS, 32 bit
Contatti:

[RISOLTO] Scanner: invalid argument [DCP-7057]

Messaggio da Beekeeper »

Ciao a tutti
di recente ho acquistato la stampante multifunzione della Brother DCP 7057
Ho installato senza problemi la stampante che funziona benissimo.
Con lo scanner però ho dei problemi.
Premetto che ho seguito tutte le istruzioni del sito della Brother installando i vari driver...
Niente! Ho letto un pò di forum ma niente... :muro:

La risposta di Xsane è:

Codice: Seleziona tutto

Non è possibile aprire il dispositivo 'brother4:bus5;dev2': L'argomento non è valido.
Se digito lsusb:

Codice: Seleziona tutto

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 04f9:0273 Brother Industries, Ltd 
Bus 001 Device 003: ID 0cf3:1006 Atheros Communications, Inc. TP-Link TL-WN322G v3 / TL-WN422G v2 802.11g [Atheros AR9271]
Se digito scanimage -L:

Codice: Seleziona tutto

device `brother4:bus5;dev2' is a Brother DCP-7057 USB scanner
Se digito sane-find-scanner -v (ho omesso la risposta scsi e parte dei risultati uguali dove ho messo tre punti in verticale):

Codice: Seleziona tutto

This is sane-find-scanner from sane-backends 1.0.22
  # sane-find-scanner will now attempt to detect your scanner. If the
  # result is different from what you expected, first make sure your
  # scanner is powered up and properly connected to your computer.
searching for USB scanners:
checking /dev/usb/scanner... failed to open (Invalid argument)
.
.
.
checking /dev/usbscanner15... failed to open (Invalid argument)
found USB scanner (vendor=0x0cf3, product=0x1006) at libusb:001:003
found USB scanner (vendor=0x04f9, product=0x0273) at libusb:001:002
  # Your USB scanner was (probably) detected. It may or may not be supported by
  # SANE. Try scanimage -L and read the backend's manpage.
  # Not checking for parallel port scanners.
  # Most Scanners connected to the parallel port or other proprietary ports
  # can't be detected by this program.
  # You may want to run this program as root to find all devices. Once you
  # found the scanner devices, be sure to adjust access permissions as
  # necessary.
done
Grazie a chiunque mi aiuterà!!!
Ciao
BK
Ultima modifica di Beekeeper il martedì 29 maggio 2012, 8:54, modificato 1 volta in totale.
If you think you are too small to make a difference, try sleeping with a mosquito!!!
Avatar utente
Beekeeper
Prode Principiante
Messaggi: 27
Iscrizione: lunedì 10 luglio 2006, 10:22
Desktop: Unity
Distribuzione: Ubuntu 12.04 LTS, 32 bit
Contatti:

Re: Scanner: invalid argument [DCP-7057]

Messaggio da Beekeeper »

Dimenticavo, uso precise pangolin e ho effettuato tutti gli aggiornamenti proposti.
If you think you are too small to make a difference, try sleeping with a mosquito!!!
Avatar utente
ezio
Prode Principiante
Messaggi: 117
Iscrizione: sabato 25 marzo 2006, 18:09

Re: Scanner: invalid argument [DCP-7057]

Messaggio da ezio »

ciao
ho il tuo stesso problema usando una multifunzione MFC 215C
ai editato il file /lib/udev/rules.d/40-libsane.rules come spiegato nella guida del sito brother ????
Avatar utente
ezio
Prode Principiante
Messaggi: 117
Iscrizione: sabato 25 marzo 2006, 18:09

Re: Scanner: invalid argument [DCP-7057]

Messaggio da ezio »

ciao

guarda qui http://ubuntuforever.altervista.org/ins ... untu-12-04

seguendo questa guida ho risolto
Avatar utente
Beekeeper
Prode Principiante
Messaggi: 27
Iscrizione: lunedì 10 luglio 2006, 10:22
Desktop: Unity
Distribuzione: Ubuntu 12.04 LTS, 32 bit
Contatti:

Re: [RISOLTO] Scanner: invalid argument [DCP-7057]

Messaggio da Beekeeper »

Avevo dimenticato di editare il file /lib/udev/rules.d/40-libsane.rules

Grazie!!!

Adesso funziona tutto!!!
If you think you are too small to make a difference, try sleeping with a mosquito!!!
Scrivi risposta

Ritorna a “Driver e periferiche”

Chi c’è in linea

Visualizzano questa sezione: Bing [Bot] e 10 ospiti