[Driver] Fullscreen giochi sballato!
Inviato: mercoledì 27 dicembre 2006, 10:02
Con envy ho installato gli ultimi driver NVIDIA solo che ora giochi come Barrage e Frozen Bubble quando partono in fullscreen non sono a tutto schermo puro ma come se la parte inferiore fosse tagliata! Come posso fare a risolvere la cosa?
Ho un asus A6jc con NVidia 7300 GO!
Con i driver 85xx andava tutto bene!!
Ah, l'xorg.conf che ha modificato l'installazione è quello fatto da me, in cui "forzo" la risoluzione a 1280x800 a 24bit di profondità!
Posto l'xorg di seguito:
Ho un asus A6jc con NVidia 7300 GO!
Con i driver 85xx andava tutto bene!!
Ah, l'xorg.conf che ha modificato l'installazione è quello fatto da me, in cui "forzo" la risoluzione a 1280x800 a 24bit di profondità!
Posto l'xorg di seguito:
Codice: Seleziona tutto
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder3) Fri Dec 15 10:12:14 PST 2006
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
#Section "InputDevice"
# Identifier "Configured Mouse"
# Driver "mouse"
# Option "CorePointer"
# Option "Device" "/dev/input/mice"
# Option "Protocol" "ExplorerPS/2"
# Option "ZAxisMapping" "4 5"
# Option "Emulate3Buttons" "true"
#EndSection
#Section "InputDevice"
# /dev/input/event
# for USB
# Identifier "stylus"
# Driver "wacom"
# Option "Device" "/dev/wacom" # Change to
# Option "Type" "stylus"
# Option "ForceDevice" "ISDV4" # Tablet PC ONLY
#EndSection
#Section "InputDevice"
# /dev/input/event
# for USB
# Identifier "eraser"
# Driver "wacom"
# Option "Device" "/dev/wacom" # Change to
# Option "Type" "eraser"
# Option "ForceDevice" "ISDV4" # Tablet PC ONLY
#EndSection
#Section "InputDevice"
# /dev/input/event
# for USB
# Identifier "cursor"
# Driver "wacom"
# Option "Device" "/dev/wacom" # Change to
# Option "Type" "cursor"
# Option "ForceDevice" "ISDV4" # Tablet PC ONLY
#EndSection
Section "ServerLayout"
# InputDevice "stylus" "SendCoreEvents"
# InputDevice "cursor" "SendCoreEvents"
# InputDevice "eraser" "SendCoreEvents"
Identifier "Default Layout"
Screen "Default Screen" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
EndSection
Section "Files"
# path to defoma fonts
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "it"
Option "XkbOptions" "lv3:ralt_switch"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "synaptics"
Option "SHMConfig" "true" #MIO per ksynaptics e gsynaptics
Option "Device" "/dev/input/mice"
Option "Protocol" "auto-dev"
Option "SendCoreEvent" "true"
Option "Emulate3Buttons" "yes"
EndSection
Section "Monitor"
Identifier "Generic Monitor"
HorizSync 28.0 - 51.0
VertRefresh 43.0 - 60.0
Option "DPMS"
EndSection
Section "Device"
Identifier "NVIDIA Corporation NVIDIA Default Card"
Driver "nvidia"
EndSection
Section "Screen"
#Option "AllowGLXWithComposite" "True"
#Option "AddARGBGLXVisuals" "True"
#Option "DisableGLXRootClipping" "True"
#Option "TripleBuffer" "true"
Identifier "Default Screen"
Device "NVIDIA Corporation NVIDIA Default Card"
Monitor "Generic Monitor"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1280x800" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x800" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x800" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x800" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x800" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x800" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection