Pagina 2 di 4
Re: [Lubuntu 12.04] Problema periferiche usb e pcmcia
Inviato: domenica 9 settembre 2012, 11:20
da cworange84
Quando collego l'adattatore alla porta usb del pc ottengo:
Codice: Seleziona tutto
$ lsusb && lsusb -t
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 002: ID 0451:2036 Texas Instruments, Inc. TUSB2036 Hub
Bus 004 Device 003: ID 0483:1307 SGS Thomson Microelectronics Cytronix 6in1 Card Reader
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 007: ID 046d:c016 Logitech, Inc. Optical Wheel Mouse
Bus 002 Device 004: ID 1310:0001 Roper Class 1 Bluetooth Dongle
/: Bus 06.Port 1: Dev 1, Class=root_hub, Driver=ehci_hcd/3p, 480M
/: Bus 05.Port 1: Dev 1, Class=root_hub, Driver=ohci_hcd/3p, 12M
/: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
|__ Port 2: Dev 2, If 0, Class=hub, Driver=hub/3p, 12M
|__ Port 3: Dev 3, If 0, Class=stor., Driver=usb-storage, 12M
/: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
|__ Port 2: Dev 7, If 0, Class=HID, Driver=usbhid, 1.5M
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
|__ Port 2: Dev 4, If 0, Class='bInterfaceClass 0xe0 not yet handled', Driver=btusb, 12M
|__ Port 2: Dev 4, If 1, Class='bInterfaceClass 0xe0 not yet handled', Driver=btusb, 12M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci_hcd/6p, 480M
Se lo collego alla pcmcia ottengo questo, che è lo stesso che non ci sia:
Codice: Seleziona tutto
$ lspcmcia
Socket 0 Bridge: [yenta_cardbus] (bus ID: 0000:02:06.0)
CardBus card -- see "lspci" for more information
Socket 1 Bridge: [yenta_cardbus] (bus ID: 0000:02:06.1)
Socket 1 Device 0: [-- no driver --] (bus ID: 1.0)
Ciao
magozurlinux, qui di seguito gli output per il bluetooth connesso alla usb del portatile (uno lo avevo già postato ma lo ripeto

):
Codice: Seleziona tutto
$ dmesg | grep Blue
[ 19.139009] Bluetooth: Core ver 2.16
[ 19.140094] Bluetooth: HCI device and connection manager initialized
[ 19.140099] Bluetooth: HCI socket layer initialized
[ 19.140102] Bluetooth: L2CAP socket layer initialized
[ 19.140111] Bluetooth: SCO socket layer initialized
[ 19.167788] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 19.167793] Bluetooth: BNEP filters: protocol multicast
[ 19.170526] Bluetooth: RFCOMM TTY layer initialized
[ 19.170534] Bluetooth: RFCOMM socket layer initialized
[ 19.170537] Bluetooth: RFCOMM ver 1.11
[ 1681.401490] Bluetooth: Generic Bluetooth USB driver ver 0.6
Codice: Seleziona tutto
$ dmesg | grep btusb
[ 1681.402330] usbcore: registered new interface driver btusb
Codice: Seleziona tutto
$ hciconfig -a
hci0: Type: BR/EDR Bus: USB
BD Address: 00:0B:0D:34:11:EE ACL MTU: 120:20 SCO MTU: 0:0
DOWN
RX bytes:724 acl:0 sco:0 events:26 errors:0
TX bytes:114 acl:0 sco:0 commands:26 errors:0
Features: 0xff 0xff 0x05 0x38 0x18 0x18 0x00 0x00
Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
Link policy:
Link mode: SLAVE ACCEPT
Codice: Seleziona tutto
$ dpkg -l | grep blue
ii blueman 1.23-0ubuntu2.1 A Graphical bluetooth manager
ii bluetooth 4.98-2ubuntu7 Bluetooth support
ii bluewho 0.1-1 notifies new discovered bluetooth devices
ii bluez 4.98-2ubuntu7 Bluetooth tools and daemons
ii bluez-alsa 4.98-2ubuntu7 Bluetooth ALSA support
ii bluez-cups 4.98-2ubuntu7 Bluetooth printer driver for CUPS
ii bluez-gstreamer 4.98-2ubuntu7 Bluetooth GStreamer support
ii bluez-hcidump 2.2-1 Analyses Bluetooth HCI packets
ii bluez-pcmcia-support 4.98-2ubuntu7 PCMCIA support files for BlueZ 2.0 Bluetooth tools
ii bluez-utils 4.98-2ubuntu7 Transitional package
ii gir1.2-gnomebluetooth-1.0 3.2.2-0ubuntu5 Introspection data for GnomeBluetooth
ii gnome-bluetooth 3.2.2-0ubuntu5 GNOME Bluetooth tools
ii libbluetooth3 4.98-2ubuntu7 Library to use the BlueZ Linux Bluetooth stack
ii libgnome-bluetooth8 3.2.2-0ubuntu5 GNOME Bluetooth tools - support library
ii python-bluez 0.18-1build2 Python wrappers around BlueZ for rapid bluetooth development
Re: [Lubuntu 12.04] Problema periferiche usb e pcmcia
Inviato: domenica 9 settembre 2012, 17:49
da magozurlinux
Ciao.
Metti un
code per ogni comando per una miglior lettura.
$ hciconfig -a
hci0: Type: BR/EDR Bus: USB
BD Address: 00:0B:0D:34:11:EE ACL MTU: 120:20 SCO MTU: 0:0
DOWN
RX bytes:724 acl:0 sco:0 events:26 errors:0
TX bytes:114 acl:0 sco:0 commands:26 errors:0
Features: 0xff 0xff 0x05 0x38 0x18 0x18 0x00 0x00
Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
Link policy:
Link mode: SLAVE ACCEPT
Il bluetooth è disabilitato, vediamo se con questi comandi si riesce ad abilitarla:
da terminale dai questi comandi:
se è vuoto, copia ed incolla queste righe, altrimenti imposta le righe evidenziate in rosso:
# Defaults for bluez
# start bluetooth on boot?
# compatibility note: If this variable is not found bluetooth will
# start
BLUETOOTH_ENABLED=1
# This setting will switch HID devices (e.g mouse/keyboad) to HCI mode, that is
# you will have bluetooth functionality from your dongle instead of only HID.
# Note that not every bluetooth dongle is capable of switching back to HID
# mode, see
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=355497
HID2HCI_ENABLED=1
HID2HCI_UNDO=1
salva ed esci dall'editor di testo.
Codice: Seleziona tutto
sudo gedit /var/lib/bluetooth/00:0B:0D:34:11:EE/config
cerca la riga
mode off
cambiala in
mode on, se non c'è aggiungila come terza riga
salva ed esci dall'editor di testo.
Da terminale dai questi comandi:
Codice: Seleziona tutto
sudo chattr +i /var/lib/bluetooth/00:0B:0D:34:11:EE/config
Riavvia il pc.
Da terminale postami questi comandi:
Re: [Lubuntu 12.04] Problema periferiche usb e pcmcia
Inviato: domenica 9 settembre 2012, 18:23
da cworange84
Ho seguito fino a sudo gedit /var/lib/bluetooth/00:0B:0D:34:11:EE/config, qui mi ha aperto il file di testo (config) vuoto. La cartella bluetooth in /var/lib non esiste: tra blueman e colord non c'è nulla. Ho provato sia con adattatore inserito che scollegato. Che faccio?
Re: [Lubuntu 12.04] Problema periferiche usb e pcmcia
Inviato: domenica 9 settembre 2012, 18:37
da magozurlinux
Da terminale postami questo comando:
Re: [Lubuntu 12.04] Problema periferiche usb e pcmcia
Inviato: domenica 9 settembre 2012, 18:50
da cworange84
Mi sa che pure il terminale conferma:
Codice: Seleziona tutto
$ ls -l /var/lib | grep b
drwxr-xr-x 2 root root 4096 ago 10 15:33 belocs
drwxr-xr-x 2 root root 4096 ago 3 11:23 blueman
drwxr-xr-x 2 root root 4096 lug 14 17:00 dbus
drwxr-xr-x 2 root root 4096 ago 7 23:40 deborphan
drwxrwsr-x 2 libuuid libuuid 4096 apr 23 15:40 libuuid
drwxr-xr-x 2 root root 4096 ago 26 15:30 openbox
drwxr-xr-x 2 root root 4096 set 8 12:28 os-prober
lrwxrwxrwx 1 root root 18 lug 14 16:32 python-support -> /usr/lib/pymodules
drwxr-xr-x 2 root root 4096 apr 23 15:42 sgml-base
drwxr-xr-x 2 root root 4096 lug 14 16:44 ubiquity
drwxr-xr-x 2 root root 4096 mar 7 2012 usb_modeswitch
drwxr-xr-x 2 root root 4096 apr 23 15:42 usbutils
drwxr-xr-x 2 root root 4096 lug 26 12:58 xkb
Re: [Lubuntu 12.04] Problema periferiche usb e pcmcia
Inviato: domenica 9 settembre 2012, 18:55
da magozurlinux
Questo è il mio
drwxr-xr-x 2 root root 4096 ago 10 12:45 belocs
drwxr-xr-x 2 root root 4096 lug 28 19:11 blueman
drwxr-xr-x 3 root root 4096 lug 28 18:48 bluetooth
drwxr-xr-x 2 root root 4096 lug 28 19:10 dbus
drwxr-xr-x 5 root root 4096 apr 23 15:22 doc-base
drwxrwsr-x 2 libuuid libuuid 4096 apr 23 15:20 libuuid
drwxr-xr-x 2 root root 4096 set 5 12:51 os-prober
drwxr-xr-x 2 root root 4096 apr 12 22:11 samba
drwxr-xr-x 2 root root 4096 apr 23 15:21 sgml-base
drwxr-xr-x 2 root root 4096 lug 28 19:04 ubiquity
drwxr-xr-x 2 root root 4096 mar 7 2012 usb_modeswitch
drwxr-xr-x 2 root root 4096 apr 23 15:22 usbutils
drwxr-xr-x 2 root root 4096 lug 28 19:20 xkb
ls -l /var/lib/bluetooth
totale 4
drwxr-xr-x 2 root root 4096 ago 17 18:25 00:15:83:45:6A:B6
Codice: Seleziona tutto
ls -l /var/lib/bluetooth/00:15:83:45:6A:B6
totale 48
-rw-r--r-- 1 root root 81 ago 29 19:04 classes
-rw-r--r-- 1 root root 93 set 9 17:37 config
-rw-r--r-- 1 root root 114 ago 29 19:04 did
-rw-r--r-- 1 root root 105 ago 29 19:04 features
-rw-r--r-- 1 root root 42 ago 28 12:42 lastseen
-rw-r--r-- 1 root root 126 ago 29 19:04 lastused
-rw------- 1 root root 110 ago 29 19:04 linkkeys
-rw-r--r-- 1 root root 84 ago 29 19:04 manufacturers
-rw-r--r-- 1 root root 87 ago 29 19:04 names
-rw-r--r-- 1 root root 111 ago 29 19:04 profiles
-rw-r--r-- 1 root root 402 ago 20 17:57 sdp
-rw-r--r-- 1 root root 24 ago 20 17:57 trusts
E' un comando che ho dato anche ad altri utenti; cambia solo il Mac Address del dongle bluetooth usb.
Forse perchè usi Lubuntu! non so!
Re: [Lubuntu 12.04] Problema periferiche usb e pcmcia
Inviato: domenica 9 settembre 2012, 19:19
da cworange84
Sto leggendo proprio adesso un
thread di poco tempo fa sempre in questa sezione del forum di un utente (gnome) cui non esiste la suddetta directory.
Il problema, ad una prima vista, sembrerebbe identico al mio e tu, in un post affermi: "
Il bug è nello stack di Bluez". Alla fine l'utente fa una prova col live di una versione precedente di ubuntu e gli funziona il bt, quindi sembrerebbe che ci sia un bug in quel pacchetto.
Io che faccio? Credi valga la pena di seguire quello stesso iter di prove oppure oppure lascio perdere?
Re: [Lubuntu 12.04] Problema periferiche usb e pcmcia
Inviato: domenica 9 settembre 2012, 19:25
da magozurlinux
Da terminale dai questi comandi:
Da terminale postami questi comandi:
Re: [Lubuntu 12.04] Problema periferiche usb e pcmcia
Inviato: domenica 9 settembre 2012, 19:39
da cworange84
Purtroppo gli output già esaminati non sono cambiati:
Codice: Seleziona tutto
$ sudo hciconfig hci0 reset
Can't init device hci0: Connection timed out (110)
Codice: Seleziona tutto
$ sudo hciconfig hci0 up
Can't init device hci0: Connection timed out (110)
Codice: Seleziona tutto
$ hciconfig -a
hci0: Type: BR/EDR Bus: USB
BD Address: 00:0B:0D:34:11:EE ACL MTU: 120:20 SCO MTU: 0:0
DOWN
RX bytes:1448 acl:0 sco:0 events:52 errors:0
TX bytes:228 acl:0 sco:0 commands:52 errors:0
Features: 0xff 0xff 0x05 0x38 0x18 0x18 0x00 0x00
Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
Link policy:
Link mode: SLAVE ACCEPT
Codice: Seleziona tutto
$ udevadm info -a -p /sys/class/bluetooth/hci0
Udevadm info starts with the device specified by the devpath and then
walks up the chain of parent devices. It prints for every device
found, all possible attributes in the udev rules key format.
A rule to match, can be composed by the attributes of the device
and the attributes from one single parent device.
looking at device '/devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/bluetooth/hci0':
KERNEL=="hci0"
SUBSYSTEM=="bluetooth"
DRIVER==""
ATTR{bus}=="USB"
ATTR{type}=="BR/EDR"
ATTR{name}==""
ATTR{class}=="0x000000"
ATTR{address}=="00:0B:0D:34:11:EE"
ATTR{features}=="0xffff053818180000"
ATTR{manufacturer}=="11"
ATTR{hci_version}=="2"
ATTR{hci_revision}=="0"
ATTR{idle_timeout}=="0"
ATTR{sniff_max_interval}=="800"
ATTR{sniff_min_interval}=="80"
looking at parent device '/devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0':
KERNELS=="2-2:1.0"
SUBSYSTEMS=="usb"
DRIVERS=="btusb"
ATTRS{bInterfaceNumber}=="00"
ATTRS{bAlternateSetting}==" 0"
ATTRS{bNumEndpoints}=="03"
ATTRS{bInterfaceClass}=="e0"
ATTRS{bInterfaceSubClass}=="01"
ATTRS{bInterfaceProtocol}=="01"
ATTRS{supports_autosuspend}=="1"
looking at parent device '/devices/pci0000:00/0000:00:1d.0/usb2/2-2':
KERNELS=="2-2"
SUBSYSTEMS=="usb"
DRIVERS=="usb"
ATTRS{configuration}==""
ATTRS{bNumInterfaces}==" 2"
ATTRS{bConfigurationValue}=="1"
ATTRS{bmAttributes}=="a0"
ATTRS{bMaxPower}==" 50mA"
ATTRS{urbnum}=="186"
ATTRS{idVendor}=="1310"
ATTRS{idProduct}=="0001"
ATTRS{bcdDevice}=="1500"
ATTRS{bDeviceClass}=="e0"
ATTRS{bDeviceSubClass}=="01"
ATTRS{bDeviceProtocol}=="01"
ATTRS{bNumConfigurations}=="1"
ATTRS{bMaxPacketSize0}=="64"
ATTRS{speed}=="12"
ATTRS{busnum}=="2"
ATTRS{devnum}=="4"
ATTRS{devpath}=="2"
ATTRS{version}==" 1.10"
ATTRS{maxchild}=="0"
ATTRS{quirks}=="0x0"
ATTRS{avoid_reset_quirk}=="0"
ATTRS{authorized}=="1"
ATTRS{manufacturer}=="SiW"
ATTRS{product}=="SiW"
ATTRS{serial}=="EE11340D0B00"
looking at parent device '/devices/pci0000:00/0000:00:1d.0/usb2':
KERNELS=="usb2"
SUBSYSTEMS=="usb"
DRIVERS=="usb"
ATTRS{configuration}==""
ATTRS{bNumInterfaces}==" 1"
ATTRS{bConfigurationValue}=="1"
ATTRS{bmAttributes}=="e0"
ATTRS{bMaxPower}==" 0mA"
ATTRS{urbnum}=="67"
ATTRS{idVendor}=="1d6b"
ATTRS{idProduct}=="0001"
ATTRS{bcdDevice}=="0302"
ATTRS{bDeviceClass}=="09"
ATTRS{bDeviceSubClass}=="00"
ATTRS{bDeviceProtocol}=="00"
ATTRS{bNumConfigurations}=="1"
ATTRS{bMaxPacketSize0}=="64"
ATTRS{speed}=="12"
ATTRS{busnum}=="2"
ATTRS{devnum}=="1"
ATTRS{devpath}=="0"
ATTRS{version}==" 1.10"
ATTRS{maxchild}=="2"
ATTRS{quirks}=="0x0"
ATTRS{avoid_reset_quirk}=="0"
ATTRS{authorized}=="1"
ATTRS{manufacturer}=="Linux 3.2.0-29-generic uhci_hcd"
ATTRS{product}=="UHCI Host Controller"
ATTRS{serial}=="0000:00:1d.0"
ATTRS{authorized_default}=="1"
looking at parent device '/devices/pci0000:00/0000:00:1d.0':
KERNELS=="0000:00:1d.0"
SUBSYSTEMS=="pci"
DRIVERS=="uhci_hcd"
ATTRS{vendor}=="0x8086"
ATTRS{device}=="0x24c2"
ATTRS{subsystem_vendor}=="0x1025"
ATTRS{subsystem_device}=="0x0035"
ATTRS{class}=="0x0c0300"
ATTRS{irq}=="11"
ATTRS{local_cpus}=="ff"
ATTRS{local_cpulist}=="0-7"
ATTRS{dma_mask_bits}=="32"
ATTRS{consistent_dma_mask_bits}=="32"
ATTRS{broken_parity_status}=="0"
ATTRS{msi_bus}==""
looking at parent device '/devices/pci0000:00':
KERNELS=="pci0000:00"
SUBSYSTEMS==""
DRIVERS==""
Re: [Lubuntu 12.04] Problema periferiche usb e pcmcia
Inviato: domenica 9 settembre 2012, 19:46
da magozurlinux
cworange84 » [url=http://forum.ubuntu-it.org/viewtopic.php?p=4180328#p4180328]2 minuti fa[/url] ha scritto:Purtroppo gli output già esaminati non sono cambiati:
$ sudo hciconfig hci0 reset
Can't init device hci0: Connection timed out (110)
$ sudo hciconfig hci0 up
Can't init device hci0: Connection timed out (110)
$ hciconfig -a
hci0: Type: BR/EDR Bus: USB
BD Address: 00:0B:0D:34:11:EE ACL MTU: 120:20 SCO MTU: 0:0
DOWN
RX bytes:1448 acl:0 sco:0 events:52 errors:0
TX bytes:228 acl:0 sco:0 commands:52 errors:0
Features: 0xff 0xff 0x05 0x38 0x18 0x18 0x00 0x00
Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
Link policy:
Link mode: SLAVE ACCEPT [/code]
$ udevadm info -a -p /sys/class/bluetooth/hci0
looking at device '/devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/bluetooth/hci0':
KERNEL=="hci0"
SUBSYSTEM=="bluetooth"
DRIVER==""
ATTR{bus}=="USB"
ATTR{type}=="BR/EDR"
ATTR{name}==""
ATTR{class}=="0x000000"
ATTR{address}=="00:0B:0D:34:11:EE"
ATTR{features}=="0xffff053818180000"
ATTR{manufacturer}=="11"
ATTR{hci_version}=="2"
ATTR{hci_revision}=="0"
ATTR{idle_timeout}=="0"
ATTR{sniff_max_interval}=="800"
ATTR{sniff_min_interval}=="80"
Il dongle bluetooth non funziona correttamente dovuto ad un bug nello stack di Bluez 4; come avevi letto nell'altra discussione.
Re: [Lubuntu 12.04] Problema periferiche usb e pcmcia
Inviato: domenica 9 settembre 2012, 20:00
da cworange84
Ho letto altre discussioni in questo forum relative a questa problematica di alcuni dispositivi bluetooth che non vanno sulle ultime versioni di ubuntu.
A questo punto mi chiedo se possa essere una cosa opportuna aggiungere un wiki (o un thread-guida) sull'argomento dove l'utente (niubbo) può verificare da sè se ha questo problema (per ora) irrisolvibile, così da evitare di aprire thread-fotocopia
...Aspettando che
Per far funzionare la pcmcia, qualche idea?
Re: [Lubuntu 12.04] Problema periferiche usb e pcmcia
Inviato: domenica 9 settembre 2012, 20:09
da cristian_c
Quando collegato direttamente alla porta usb, l'adattatore viene riconosciuto:
Codice: Seleziona tutto
Bus 002 Device 004: ID 1310:0001 Roper Class 1 Bluetooth Dongle
e associato correttamente al driver:
Codice: Seleziona tutto
|__ Port 2: Dev 4, If 0, Class='bInterfaceClass 0xe0 not yet handled', Driver=btusb, 12M
|__ Port 2: Dev 4, If 1, Class='bInterfaceClass 0xe0 not yet handled', Driver=btusb, 12M
Per quanto riguarda la scheda pcmcia, collega il mouse alla scheda e digita:
copiando il risultato qui all'interno del tag 'code'
A questo punto mi chiedo se possa essere una cosa opportuna aggiungere un wiki (o un thread-guida) sull'argomento dove l'utente (niubbo) può verificare da sè se ha questo problema (per ora) irrisolvibile, così da evitare di aprire thread-fotocopia
Puoi segnalare questa info direttamente al Gruppo Documentazione

Re: [Lubuntu 12.04] Problema periferiche usb e pcmcia
Inviato: domenica 9 settembre 2012, 20:11
da magozurlinux
cworange84 » [url=http://forum.ubuntu-it.org/viewtopic.php?p=4180349#p4180349]3 minuti fa[/url] ha scritto:Ho letto altre discussioni in questo forum relative a questa problematica di alcuni dispositivi bluetooth che non vanno sulle ultime versioni di ubuntu.
A questo punto mi chiedo se possa essere una cosa opportuna aggiungere un wiki (o un thread-guida) sull'argomento dove l'utente (niubbo) può verificare da sè se ha questo problema (per ora) irrisolvibile, così da evitare di aprire thread-fotocopia
...Aspettando che
Per far funzionare la pcmcia, qualche idea?
Hai perfettamente ragione, ci vorrebbe una guida dove l'utente niubbo potrebbe verificare se il proprio dispositivo bluetooth funziona o no, senza aprire tread; però può fare delle ricerche su Internet e dare gli stessi comandi per vedere cosa risponde il terminale.
Sì, ora che non fa più caldo, potrei provare a ricompilare il kernel per il bluetooth, se riuscirò nell'impresa ti invierò un MP.
Ora devo andare, per la PCMCIA vedrò cosa potrò fare.
A domani!

Re: [Lubuntu 12.04] Problema periferiche usb e pcmcia
Inviato: domenica 9 settembre 2012, 20:15
da cristian_c
@magozurlinux,
Sì, ora che non fa più caldo, potrei provare a ricompilare il kernel per il bluetooth, se riuscirò nell'impresa ti invierò un MP.
Vedo che hai cominciato a sperimentare le infinite potenzialità del kernel

Re: [Lubuntu 12.04] Problema periferiche usb e pcmcia
Inviato: domenica 9 settembre 2012, 20:29
da cworange84
Il led del mouse non si attiva se collegato alla scheda, infatti collegato o no l'output è questo:
Codice: Seleziona tutto
$ lspcmcia
Socket 0 Bridge: [yenta_cardbus] (bus ID: 0000:02:06.0)
CardBus card -- see "lspci" for more information
Socket 1 Bridge: [yenta_cardbus] (bus ID: 0000:02:06.1)
Socket 1 Device 0: [-- no driver --] (bus ID: 1.0)
Non so se è utile cmq questo è l'output di messages sempre riguardo il mouse nella pcmcia:
Codice: Seleziona tutto
$ tail -f /var/log/messages
Sep 9 20:21:29 acer kernel: [ 8773.804092] usb 5-2: new low-speed USB device number 6 using ohci_hcd
Sep 9 20:21:30 acer kernel: [ 8774.552074] usb 5-2: new low-speed USB device number 7 using ohci_hcd
Sep 9 20:21:31 acer kernel: [ 8775.296083] usb 5-2: new low-speed USB device number 8 using ohci_hcd
Sep 9 20:21:31 acer kernel: [ 8775.880086] usb 5-2: new low-speed USB device number 9 using ohci_hcd
invece se lo collego alla usb del notebook ottengo questo messages:
Codice: Seleziona tutto
Sep 9 20:22:00 acer kernel: [ 8804.900074] usb 3-1: new low-speed USB device number 5 using uhci_hcd
Sep 9 20:22:01 acer kernel: [ 8805.095969] input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input8
Sep 9 20:22:01 acer kernel: [ 8805.099547] generic-usb 0003:046D:C016.0003: input,hidraw0: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.1-1/input0
Re: [Lubuntu 12.04] Problema periferiche usb e pcmcia
Inviato: domenica 9 settembre 2012, 20:52
da cristian_c
Apri un terminale e digita:
copiando il risultato qui all'interno del tag 'code'

Re: [Lubuntu 12.04] Problema periferiche usb e pcmcia
Inviato: lunedì 10 settembre 2012, 11:07
da cworange84
Codice: Seleziona tutto
$ lspci -k
00:00.0 Host bridge: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02)
Subsystem: Acer Incorporated [ALI] Device 0035
Kernel driver in use: agpgart-intel
00:00.1 System peripheral: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02)
Subsystem: Acer Incorporated [ALI] Device 0035
00:00.3 System peripheral: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02)
Subsystem: Acer Incorporated [ALI] Device 0035
00:02.0 VGA compatible controller: Intel Corporation 82852/855GM Integrated Graphics Device (rev 02)
Subsystem: Acer Incorporated [ALI] Device 0035
Kernel driver in use: i915
Kernel modules: intelfb, i915
00:02.1 Display controller: Intel Corporation 82852/855GM Integrated Graphics Device (rev 02)
Subsystem: Acer Incorporated [ALI] Device 0035
Kernel modules: i915
00:1d.0 USB controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 03)
Subsystem: Acer Incorporated [ALI] Device 0035
Kernel driver in use: uhci_hcd
00:1d.1 USB controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 03)
Subsystem: Acer Incorporated [ALI] Device 0035
Kernel driver in use: uhci_hcd
00:1d.2 USB controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 03)
Subsystem: Acer Incorporated [ALI] Device 0035
Kernel driver in use: uhci_hcd
00:1d.7 USB controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 03)
Subsystem: Acer Incorporated [ALI] Device 0035
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 83)
Kernel modules: shpchp
00:1f.0 ISA bridge: Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge (rev 03)
Kernel modules: iTCO_wdt, intel-rng
00:1f.1 IDE interface: Intel Corporation 82801DBM (ICH4-M) IDE Controller (rev 03)
Subsystem: Acer Incorporated [ALI] Device 0035
Kernel driver in use: ata_piix
00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 03)
Subsystem: Acer Incorporated [ALI] Device 0035
Kernel modules: i2c-i801
00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 03)
Subsystem: Acer Incorporated [ALI] Device 0035
Kernel driver in use: snd_intel8x0
Kernel modules: snd-intel8x0
00:1f.6 Modem: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 03)
Subsystem: Acer Incorporated [ALI] Device 0035
Kernel modules: snd-intel8x0m
02:02.0 Ethernet controller: Broadcom Corporation BCM4401 100Base-T (rev 01)
Subsystem: Acer Incorporated [ALI] TravelMate 660
Kernel driver in use: b44
Kernel modules: b44
02:04.0 Network controller: Intel Corporation PRO/Wireless LAN 2100 3B Mini PCI Adapter (rev 04)
Subsystem: Intel Corporation MIM2000/Centrino
Kernel driver in use: ipw2100
Kernel modules: ipw2100
02:06.0 CardBus bridge: O2 Micro, Inc. OZ711EC1 SmartCardBus Controller (rev 20)
Subsystem: Acer Incorporated [ALI] TravelMate 660
Kernel driver in use: yenta_cardbus
Kernel modules: yenta_socket
02:06.1 CardBus bridge: O2 Micro, Inc. OZ711EC1 SmartCardBus Controller (rev 20)
Subsystem: Acer Incorporated [ALI] TravelMate 660
Kernel driver in use: yenta_cardbus
Kernel modules: yenta_socket
02:07.0 FireWire (IEEE 1394): Texas Instruments TSB43AB21 IEEE-1394a-2000 Controller (PHY/Link)
Subsystem: Acer Incorporated [ALI] TravelMate 660
Kernel driver in use: firewire_ohci
Kernel modules: firewire-ohci
03:00.0 USB controller: NEC Corporation USB (rev 44)
Subsystem: NEC Corporation Hama USB 2.0 CardBus
Kernel driver in use: ohci_hcd
03:00.1 USB controller: NEC Corporation USB 2.0 (rev 05)
Subsystem: NEC Corporation USB 2.0
Kernel driver in use: ehci_hcd
Re: [Lubuntu 12.04] Problema periferiche usb e pcmcia
Inviato: lunedì 10 settembre 2012, 11:33
da cristian_c
Sembra che il bus per le schede pcmcia sia stato riconosciuto (e associato al driver) compresa la porta usb pcmcia
Per quanto riguarda la gestione della scheda, prova a guardare qui:
http://www.linuxguide.it/linux/amminist ... CMCIA.html 
Re: [Lubuntu 12.04] Problema periferiche usb e pcmcia
Inviato: lunedì 10 settembre 2012, 13:43
da cworange84
Il pacchetto
pcmcia-cs, di cui cardctl fa parte, non esiste più, almeno con quel nome:
Codice: Seleziona tutto
$ sudo apt-get install pcmcia-cs
Lettura elenco dei pacchetti... Fatto
Generazione albero delle dipendenze
Lettura informazioni sullo stato... Fatto
Il pacchetto pcmcia-cs non ha versioni disponibili, ma è nominato da un altro
pacchetto. Questo può significare che il pacchetto è mancante, è obsoleto
oppure è disponibile solo all'interno di un'altra sorgente
ed è stato rimpiazzato da
pcmciautils, come è scritto
qui.
Per quanto riguarda
pccardctl (credo "successore" di cardctl della guida che hai linkato), i comandi supportati sono:
Codice: Seleziona tutto
ls
insert
eject
suspend
resume
reset
info
status
config
ident
e qui di seguito ho messo alcuni output (con mouse inserito o no non cambiano):
Codice: Seleziona tutto
$ pccardctl status
Socket 0:
3.3V
32-bit
PC Card
Socket 1:
5.0V
16-bit
PC Card
Subdevice 0 (function 0) [unbound]
Codice: Seleziona tutto
$ pccardctl info
PRODID_1=""
PRODID_2=""
PRODID_3=""
PRODID_4=""
MANFID=0000,0000
FUNCID=255
PRODID_1="O2Micro
"
PRODID_2="SmartCardBus Reader
"
PRODID_3="V1.0
"
PRODID_4=""
MANFID=ffff,0001
FUNCID=255
Codice: Seleziona tutto
$ pccardctl ident
Socket 0:
no product info available
Socket 1:
product info: "O2Micro
", "SmartCardBus Reader
", "V1.0
", ""
manfid: 0xffff, 0x0001
Codice: Seleziona tutto
$ pccardctl config
Socket 0:
command 'config' not yet handled by pccardctl
Mi puoi aiutare?
Re: [Lubuntu 12.04] Problema periferiche usb e pcmcia
Inviato: lunedì 10 settembre 2012, 14:36
da cristian_c
Mi puoi aiutare?
Posta il man di pccardctl
Inoltre, collega un dispositivo alla scheda pcmcia e riavvia il sistema. Quindi posta qui il log di dmesg
