Lettore MP3 generico, non viene montato
Inviato: venerdì 3 agosto 2012, 17:33
Stavo per acquistare un lettore MP3 tipo I-pod nano ma mi è stato regalato dall'associazione di altroconsumo.
Purtroppo nel manuale d'istruzioni è specificata la non compatibilità con i sistemi operativi Apple ma solo con Windows.
Già qui la dice lunga, ma ho fin'ora sperato che con la mia Kubuntu 11.04 di non aver problemi e invece......
Non sono un mago del terminale per cui tutto quello che posso fare è postare la parte secondo me utile per farvi capire il problema: dmesg
In pratica la periferica usb in questione è la ACTIONS HS USB FlashDisk 2.00 PQ: 0 ANSI: 0 CCS
Ho provato attraverso Virtualbox dove ho windows xp sp3 aggiornatissimo e viene installata ma al momento in cui tento di accedervi dalle risorse del computer mi dice "periferica non inserita" e non mi fa fare niente... dovrebbe avere 2 GB di memoria ma da windows risulta 0 e non me la lascia nemmeno formattare.
Non so che fare, è davvero un bel lettore si sente molto bene è piccolino e sarebbe ottimo per me che lo userei per fare running, so che monta un chip Samsung (ero riuscito pure a risalire al nome del chip.....
ora l'ho scordato!)
Vi lascio le foto....


Io non lo riesco a montare dato che non lo vede come sdb1 o 2 o altro... quindi non saprei.
Qualche idea?
Purtroppo nel manuale d'istruzioni è specificata la non compatibilità con i sistemi operativi Apple ma solo con Windows.
Già qui la dice lunga, ma ho fin'ora sperato che con la mia Kubuntu 11.04 di non aver problemi e invece......
Non sono un mago del terminale per cui tutto quello che posso fare è postare la parte secondo me utile per farvi capire il problema: dmesg
Codice: Seleziona tutto
[16529.792083] usb 2-5: new high speed USB device number 3 using ehci_hcd
[16530.416093] usb 4-2: new full speed USB device number 14 using ohci_hcd
[16530.556055] usb 4-2: device descriptor read/64, error -62
[16530.800086] usb 4-2: device descriptor read/64, error -62
[16531.040085] usb 4-2: new full speed USB device number 15 using ohci_hcd
[16531.180092] usb 4-2: device descriptor read/64, error -62
[16531.424065] usb 4-2: device descriptor read/64, error -62
[16531.664071] usb 4-2: new full speed USB device number 16 using ohci_hcd
[16532.072054] usb 4-2: device not accepting address 16, error -62
[16532.208061] usb 4-2: new full speed USB device number 17 using ohci_hcd
[16532.616051] usb 4-2: device not accepting address 17, error -62
[16532.616090] hub 4-0:1.0: unable to enumerate USB device on port 2
[16532.822355] usbcore: registered new interface driver uas
[16532.843893] Initializing USB Mass Storage driver...
[16532.844265] scsi1 : usb-storage 2-5:1.0
[16532.844444] usbcore: registered new interface driver usb-storage
[16532.844450] USB Mass Storage support registered.
[16533.845119] scsi 1:0:0:0: Direct-Access JetFlash Transcend 4GB 8.07 PQ: 0 ANSI: 2
[16533.849634] sd 1:0:0:0: Attached scsi generic sg1 type 0
[16533.850967] sd 1:0:0:0: [sdb] 7843840 512-byte logical blocks: (4.01 GB/3.74 GiB)
[16533.851598] sd 1:0:0:0: [sdb] Write Protect is off
[16533.851608] sd 1:0:0:0: [sdb] Mode Sense: 03 00 00 00
[16533.852222] sd 1:0:0:0: [sdb] No Caching mode page present
[16533.852230] sd 1:0:0:0: [sdb] Assuming drive cache: write through
[16533.855811] sd 1:0:0:0: [sdb] No Caching mode page present
[16533.855816] sd 1:0:0:0: [sdb] Assuming drive cache: write through
[16534.118692] sdb: sdb1 sdb2 < sdb5 >
[16534.121321] sd 1:0:0:0: [sdb] No Caching mode page present
[16534.121332] sd 1:0:0:0: [sdb] Assuming drive cache: write through
[16534.121339] sd 1:0:0:0: [sdb] Attached SCSI removable disk
[16564.281604] usb 2-5: USB disconnect, device number 3
[16616.636080] usb 2-4: new high speed USB device number 4 using ehci_hcd
[16616.771701] scsi2 : usb-storage 2-4:1.0
[16617.260079] usb 4-2: new full speed USB device number 18 using ohci_hcd
[16617.400103] usb 4-2: device descriptor read/64, error -62
[16617.644055] usb 4-2: device descriptor read/64, error -62
[16617.781411] scsi 2:0:0:0: Direct-Access ACTIONS HS USB FlashDisk 2.00 PQ: 0 ANSI: 0 CCS
[16617.812564] sd 2:0:0:0: Attached scsi generic sg1 type 0
[16617.814070] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[16617.884092] usb 4-2: new full speed USB device number 19 using ohci_hcd
[16618.024093] usb 4-2: device descriptor read/64, error -62
[16618.268063] usb 4-2: device descriptor read/64, error -62
[16618.508076] usb 4-2: new full speed USB device number 20 using ohci_hcd
[16618.916083] usb 4-2: device not accepting address 20, error -62
[16619.052089] usb 4-2: new full speed USB device number 21 using ohci_hcd
[16619.460149] usb 4-2: device not accepting address 21, error -62
[16619.460180] hub 4-0:1.0: unable to enumerate USB device on port 2
[16841.208118] usb 1-4: reset high speed USB device number 3 using ehci_hcd
[16841.594263] uvcvideo: Found UVC 1.00 device <unnamed> (046d:081d)
[16841.841137] input: UVC Camera (046d:081d) as /devices/pci0000:00/0000:00:12.2/usb1/1-4/1-4:1.2/input/input7
[17182.412106] usb 2-4: reset high speed USB device number 4 using ehci_hcd
[17182.545169] scsi3 : usb-storage 2-4:1.0
[17183.551442] scsi 3:0:0:0: Direct-Access ACTIONS HS USB FlashDisk 2.00 PQ: 0 ANSI: 0 CCS
[17184.012609] sd 3:0:0:0: Attached scsi generic sg1 type 0
[17184.013938] sd 3:0:0:0: [sdb] Attached SCSI removable disk
[17367.122140] usb 2-4: USB disconnect, device number 4
[17384.444094] usb 2-4: new high speed USB device number 5 using ehci_hcd
[17384.579234] scsi4 : usb-storage 2-4:1.0
[17385.068107] usb 4-2: new full speed USB device number 22 using ohci_hcd
[17385.208079] usb 4-2: device descriptor read/64, error -62
[17385.452093] usb 4-2: device descriptor read/64, error -62
[17385.583430] scsi 4:0:0:0: Direct-Access ACTIONS HS USB FlashDisk 2.00 PQ: 0 ANSI: 0 CCS
[17385.609402] sd 4:0:0:0: Attached scsi generic sg1 type 0
[17385.610961] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[17385.692148] usb 4-2: new full speed USB device number 23 using ohci_hcd
[17385.832040] usb 4-2: device descriptor read/64, error -62
[17386.076098] usb 4-2: device descriptor read/64, error -62
[17386.316095] usb 4-2: new full speed USB device number 24 using ohci_hcd
[17386.724085] usb 4-2: device not accepting address 24, error -62
[17386.860093] usb 4-2: new full speed USB device number 25 using ohci_hcd
[17387.268089] usb 4-2: device not accepting address 25, error -62
[17387.268148] hub 4-0:1.0: unable to enumerate USB device on port 2
[19179.592114] usb 2-4: reset high speed USB device number 5 using ehci_hcd
[19179.725069] scsi5 : usb-storage 2-4:1.0
[19180.731254] scsi 5:0:0:0: Direct-Access ACTIONS HS USB FlashDisk 2.00 PQ: 0 ANSI: 0 CCS
[19181.052867] sd 5:0:0:0: Attached scsi generic sg1 type 0
[19181.054417] sd 5:0:0:0: [sdb] Attached SCSI removable disk
[20378.167772] usb 2-4: USB disconnect, device number 5
[20393.532138] usb 2-4: new high speed USB device number 6 using ehci_hcd
[20393.667417] scsi6 : usb-storage 2-4:1.0
[20394.156102] usb 4-2: new full speed USB device number 26 using ohci_hcd
[20394.296073] usb 4-2: device descriptor read/64, error -62
[20394.540110] usb 4-2: device descriptor read/64, error -62
[20394.671562] scsi 6:0:0:0: Direct-Access ACTIONS HS USB FlashDisk 2.00 PQ: 0 ANSI: 0 CCS
[20394.688025] sd 6:0:0:0: Attached scsi generic sg1 type 0
[20394.689546] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[20394.780096] usb 4-2: new full speed USB device number 27 using ohci_hcd
[20394.920096] usb 4-2: device descriptor read/64, error -62
[20395.164090] usb 4-2: device descriptor read/64, error -62
[20395.404126] usb 4-2: new full speed USB device number 28 using ohci_hcd
[20395.812057] usb 4-2: device not accepting address 28, error -62
[20395.948067] usb 4-2: new full speed USB device number 29 using ohci_hcd
[20396.356080] usb 4-2: device not accepting address 29, error -62
[20396.356136] hub 4-0:1.0: unable to enumerate USB device on port 2
[23649.039743] usb 2-4: USB disconnect, device number 6
[23715.160056] usb 2-4: new high speed USB device number 7 using ehci_hcd
[23715.295315] scsi7 : usb-storage 2-4:1.0
[23715.784059] usb 4-2: new full speed USB device number 30 using ohci_hcd
[23715.924052] usb 4-2: device descriptor read/64, error -62
[23716.168080] usb 4-2: device descriptor read/64, error -62
[23716.305348] scsi 7:0:0:0: Direct-Access ACTIONS HS USB FlashDisk 2.00 PQ: 0 ANSI: 0 CCS
[23716.408077] usb 4-2: new full speed USB device number 31 using ohci_hcd
[23716.504611] sd 7:0:0:0: Attached scsi generic sg1 type 0
[23716.506210] sd 7:0:0:0: [sdb] Attached SCSI removable disk
[23716.548072] usb 4-2: device descriptor read/64, error -62
[23716.792068] usb 4-2: device descriptor read/64, error -62
[23717.032079] usb 4-2: new full speed USB device number 32 using ohci_hcd
[23717.440067] usb 4-2: device not accepting address 32, error -62
[23717.576077] usb 4-2: new full speed USB device number 33 using ohci_hcd
[23717.984039] usb 4-2: device not accepting address 33, error -62
[23717.984064] hub 4-0:1.0: unable to enumerate USB device on port 2
[23718.210837] usb 2-4: USB disconnect, device number 7
[23768.012119] usb 2-4: new high speed USB device number 8 using ehci_hcd
[23768.147447] scsi8 : usb-storage 2-4:1.0
[23768.636069] usb 4-2: new full speed USB device number 34 using ohci_hcd
[23768.776050] usb 4-2: device descriptor read/64, error -62
[23769.020124] usb 4-2: device descriptor read/64, error -62
[23769.151411] scsi 8:0:0:0: Direct-Access ACTIONS HS USB FlashDisk 2.00 PQ: 0 ANSI: 0 CCS
[23769.260105] usb 4-2: new full speed USB device number 35 using ohci_hcd
[23769.313635] sd 8:0:0:0: Attached scsi generic sg1 type 0
[23769.315248] sd 8:0:0:0: [sdb] Attached SCSI removable disk
[23769.400083] usb 4-2: device descriptor read/64, error -62
[23769.644068] usb 4-2: device descriptor read/64, error -62
[23769.884070] usb 4-2: new full speed USB device number 36 using ohci_hcd
[23770.292079] usb 4-2: device not accepting address 36, error -62
[23770.428124] usb 4-2: new full speed USB device number 37 using ohci_hcd
[23770.836067] usb 4-2: device not accepting address 37, error -62
[23770.836126] hub 4-0:1.0: unable to enumerate USB device on port 2
gefforex@gefforex-desktop:~$
Ho provato attraverso Virtualbox dove ho windows xp sp3 aggiornatissimo e viene installata ma al momento in cui tento di accedervi dalle risorse del computer mi dice "periferica non inserita" e non mi fa fare niente... dovrebbe avere 2 GB di memoria ma da windows risulta 0 e non me la lascia nemmeno formattare.
Non so che fare, è davvero un bel lettore si sente molto bene è piccolino e sarebbe ottimo per me che lo userei per fare running, so che monta un chip Samsung (ero riuscito pure a risalire al nome del chip.....
Vi lascio le foto....


Io non lo riesco a montare dato che non lo vede come sdb1 o 2 o altro... quindi non saprei.
Qualche idea?
