Forum Ubuntu-it

Codice: Seleziona tutto

Lettura elenco dei pacchetti... Fatto
Generazione albero delle dipendenze       
Lettura informazioni sullo stato... Fatto
broadcom-sta-common è già alla versione più recente.
broadcom-sta-source è già alla versione più recente.
È stato impostato broadcom-sta-source per l'installazione manuale.
0 aggiornati, 0 installati, 0 da rimuovere e 0 non aggiornati.

Codice: Seleziona tutto

lspci -k

Codice: Seleziona tutto

00:00.0 Host bridge: Intel Corporation N10 Family DMI Bridge (rev 02)
	Subsystem: ASUSTeK Computer Inc. Device 83ac
	Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller: Intel Corporation N10 Family Integrated Graphics Controller (rev 02)
	Subsystem: ASUSTeK Computer Inc. Device 8446
	Kernel driver in use: i915
	Kernel modules: i915
00:02.1 Display controller: Intel Corporation N10 Family Integrated Graphics Controller (rev 02)
	Subsystem: ASUSTeK Computer Inc. Device 8446
00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 02)
	Subsystem: ASUSTeK Computer Inc. Device 841c
	Kernel driver in use: snd_hda_intel
	Kernel modules: snd-hda-intel
00:1c.0 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 1 (rev 02)
	Kernel driver in use: pcieport
	Kernel modules: shpchp
00:1c.1 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 2 (rev 02)
	Kernel driver in use: pcieport
	Kernel modules: shpchp
00:1c.2 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 3 (rev 02)
	Kernel driver in use: pcieport
	Kernel modules: shpchp
00:1d.0 USB controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 (rev 02)
	Subsystem: ASUSTeK Computer Inc. Device 83ad
	Kernel driver in use: uhci_hcd
00:1d.1 USB controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 02)
	Subsystem: ASUSTeK Computer Inc. Device 83ad
	Kernel driver in use: uhci_hcd
00:1d.2 USB controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 02)
	Subsystem: ASUSTeK Computer Inc. Device 83ad
	Kernel driver in use: uhci_hcd
00:1d.3 USB controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 02)
	Subsystem: ASUSTeK Computer Inc. Device 83ad
	Kernel driver in use: uhci_hcd
00:1d.7 USB controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 02)
	Subsystem: ASUSTeK Computer Inc. Device 83ad
	Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation NM10 Family LPC Controller (rev 02)
	Subsystem: ASUSTeK Computer Inc. Device 83ad
	Kernel driver in use: lpc_ich
	Kernel modules: lpc_ich
00:1f.2 SATA controller: Intel Corporation N10/ICH7 Family SATA Controller [AHCI mode] (rev 02)
	Subsystem: ASUSTeK Computer Inc. Device 83ad
	Kernel driver in use: ahci
00:1f.3 SMBus: Intel Corporation N10/ICH 7 Family SMBus Controller (rev 02)
	Subsystem: ASUSTeK Computer Inc. Device 83ad
	Kernel modules: i2c-i801
01:00.0 Ethernet controller: Atheros Communications Inc. AR8152 v2.0 Fast Ethernet (rev c1)
	Subsystem: ASUSTeK Computer Inc. Device 8468
	Kernel driver in use: atl1c
	Kernel modules: atl1c
02:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01)
	Subsystem: AzureWave Device 2047
	Kernel modules: bcma
04:00.0 VGA compatible controller: NVIDIA Corporation Device 0a76 (rev a2)
	Subsystem: ASUSTeK Computer Inc. Device 8446
	Kernel modules: nouveau, nvidiafb

Codice: Seleziona tutto

02:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01)
   Subsystem: AzureWave Device 2047
   Kernel modules: bcma

Codice: Seleziona tutto

cat /etc/modprobe.d/blacklist.conf

Codice: Seleziona tutto

# This file lists those modules which we don't want to be loaded by
# alias expansion, usually so some other driver will be loaded for the
# device instead.

# evbug is a debug tool that should be loaded explicitly
blacklist evbug

# these drivers are very simple, the HID drivers are usually preferred
blacklist usbmouse
blacklist usbkbd

# replaced by e100
blacklist eepro100

# replaced by tulip
blacklist de4x5

# causes no end of confusion by creating unexpected network interfaces
blacklist eth1394

# snd_intel8x0m can interfere with snd_intel8x0, doesn't seem to support much
# hardware on its own (Ubuntu bug #2011, #6810)
blacklist snd_intel8x0m

# Conflicts with dvb driver (which is better for handling this device)
blacklist snd_aw2

# causes failure to suspend on HP compaq nc6000 (Ubuntu: #10306)
blacklist i2c_i801

# replaced by p54pci
blacklist prism54

#replaced by b43 and ssb.
blacklist bcm43xx

# most apps now use garmin usb driver directly (Ubuntu: #114565)
blacklist garmin_gps

# replaced by asus-laptop (Ubuntu: #184721)
blacklist asus_acpi

# low-quality, just noise when being used for sound playback, causes
# hangs at desktop session start (Ubuntu: #246969)
blacklist snd_pcsp

# ugly and loud noise, getting on everyone's nerves; this should be done by a
# nice pulseaudio bing (Ubuntu: #77010)
blacklist pcspkr

# EDAC driver for amd76x clashes with the agp driver preventing the aperture
# from being initialised (Ubuntu: #297750). Blacklist so that the driver
# continues to build and is installable for the few cases where its
# really needed.
blacklist amd76x_edac

Codice: Seleziona tutto

[    0.229188] pnp 00:02: [io  0x0087]
[    0.229193] pnp 00:02: [io  0x0089-0x008b]
[    0.229198] pnp 00:02: [io  0x008f]
[    0.229203] pnp 00:02: [io  0x00c0-0x00df]
[    0.229260] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.229290] pnp 00:03: [io  0x0070-0x0071]
[    0.229309] pnp 00:03: [irq 8]
[    0.229361] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.229433] pnp 00:04: [io  0x0060]
[    0.229439] pnp 00:04: [io  0x0064]
[    0.229451] pnp 00:04: [irq 1]
[    0.229505] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.229579] pnp 00:05: [irq 12]
[    0.229642] pnp 00:05: Plug and Play ACPI device, IDs SYN0a13 SYN0a00 SYN0002 PNP0f13 (active)
[    0.229666] pnp 00:06: [io  0x0061]
[    0.229720] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.229744] pnp 00:07: [io  0x00f0-0x00ff]
[    0.229756] pnp 00:07: [irq 13]
[    0.229809] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.230075] pnp 00:08: [io  0x0010-0x001f]
[    0.230082] pnp 00:08: [io  0x0022-0x003f]
[    0.230087] pnp 00:08: [io  0x0044-0x004d]
[    0.230092] pnp 00:08: [io  0x0050-0x005e]
[    0.230097] pnp 00:08: [io  0x0063]
[    0.230106] pnp 00:08: [io  0x0065]
[    0.230111] pnp 00:08: [io  0x0067-0x006f]
[    0.230116] pnp 00:08: [io  0x0072-0x007f]
[    0.230121] pnp 00:08: [io  0x0080]
[    0.230126] pnp 00:08: [io  0x0084-0x0086]
[    0.230131] pnp 00:08: [io  0x0088]
[    0.230136] pnp 00:08: [io  0x008c-0x008e]
[    0.230141] pnp 00:08: [io  0x0090-0x009f]
[    0.230146] pnp 00:08: [io  0x00a2-0x00bf]
[    0.230151] pnp 00:08: [io  0x00e0-0x00ef]
[    0.230157] pnp 00:08: [io  0x025c-0x025f]
[    0.230162] pnp 00:08: [io  0x0380-0x0383]
[    0.230167] pnp 00:08: [io  0x0400-0x041f]
[    0.230172] pnp 00:08: [io  0x04d0-0x04d1]
[    0.230177] pnp 00:08: [io  0x0800-0x087f]
[    0.230183] pnp 00:08: [io  0x0400-0x03ff disabled]
[    0.230188] pnp 00:08: [io  0x0480-0x04bf]
[    0.230194] pnp 00:08: [mem 0xfed1c000-0xfed1ffff]
[    0.230199] pnp 00:08: [mem 0xfed20000-0xfed3ffff]
[    0.230204] pnp 00:08: [mem 0xfed50000-0xfed8ffff]
[    0.230210] pnp 00:08: [mem 0xffb00000-0xffbfffff]
[    0.230215] pnp 00:08: [mem 0xfff00000-0xffffffff]
[    0.230346] system 00:08: [io  0x025c-0x025f] has been reserved
[    0.230353] system 00:08: [io  0x0380-0x0383] has been reserved
[    0.230360] system 00:08: [io  0x0400-0x041f] has been reserved
[    0.230366] system 00:08: [io  0x04d0-0x04d1] has been reserved
[    0.230372] system 00:08: [io  0x0800-0x087f] has been reserved
[    0.230378] system 00:08: [io  0x0480-0x04bf] has been reserved
[    0.230386] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.230393] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.230399] system 00:08: [mem 0xfed50000-0xfed8ffff] has been reserved
[    0.230406] system 00:08: [mem 0xffb00000-0xffbfffff] has been reserved
[    0.230412] system 00:08: [mem 0xfff00000-0xffffffff] has been reserved
[    0.230420] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.230559] pnp 00:09: [mem 0xfed00000-0xfed003ff]
[    0.230623] pnp 00:09: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.230739] pnp 00:0a: [mem 0xfec00000-0xfec00fff]
[    0.230746] pnp 00:0a: [mem 0xfee00000-0xfee00fff]
[    0.230832] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.230839] system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.230847] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.230931] pnp 00:0b: [mem 0xe0000000-0xefffffff]
[    0.231014] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
[    0.231023] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.231521] pnp 00:0c: [mem 0x00000000-0x0009ffff]
[    0.231528] pnp 00:0c: [mem 0x000c0000-0x000cffff]
[    0.231534] pnp 00:0c: [mem 0x000e0000-0x000fffff]
[    0.231539] pnp 00:0c: [mem 0x00100000-0x7f6fffff]
[    0.231545] pnp 00:0c: [mem 0xfed90000-0xffffffff]
[    0.231667] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.231674] system 00:0c: [mem 0x000c0000-0x000cffff] could not be reserved
[    0.231681] system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.231688] system 00:0c: [mem 0x00100000-0x7f6fffff] could not be reserved
[    0.231694] system 00:0c: [mem 0xfed90000-0xffffffff] could not be reserved
[    0.231702] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.232144] pnp: PnP ACPI: found 13 devices
[    0.232149] ACPI: ACPI bus type pnp unregistered
[    0.232154] PnPBIOS: Disabled by ACPI PNP
[    0.272310] pci 0000:00:1c.1: bridge window [io  0x1000-0x0fff] to [bus 02-03] add_size 1000
[    0.272330] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
[    0.272352] pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[    0.272359] pci 0000:00:1c.1: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[    0.272371] pci 0000:00:1c.2: BAR 15: assigned [mem 0x7f700000-0x7f8fffff 64bit pref]
[    0.272380] pci 0000:00:1c.1: BAR 13: assigned [io  0x1000-0x1fff]
[    0.272387] pci 0000:00:1c.0: PCI bridge to [bus 04]
[    0.272395] pci 0000:00:1c.0:   bridge window [io  0xe000-0xefff]
[    0.272404] pci 0000:00:1c.0:   bridge window [mem 0xfa000000-0xfbffffff]
[    0.272413] pci 0000:00:1c.0:   bridge window [mem 0xce000000-0xdfffffff 64bit pref]
[    0.272423] pci 0000:00:1c.1: PCI bridge to [bus 02-03]
[    0.272430] pci 0000:00:1c.1:   bridge window [io  0x1000-0x1fff]
[    0.272439] pci 0000:00:1c.1:   bridge window [mem 0xf6000000-0xf9ffffff]
[    0.272447] pci 0000:00:1c.1:   bridge window [mem 0xc8000000-0xcdffffff 64bit pref]
[    0.272457] pci 0000:00:1c.2: PCI bridge to [bus 01]
[    0.272464] pci 0000:00:1c.2:   bridge window [io  0xd000-0xdfff]
[    0.272473] pci 0000:00:1c.2:   bridge window [mem 0xf5f00000-0xf5ffffff]
[    0.272481] pci 0000:00:1c.2:   bridge window [mem 0x7f700000-0x7f8fffff 64bit pref]
[    0.272491] pci 0000:00:1e.0: PCI bridge to [bus 05]
[    0.272539] pci 0000:00:1c.1: enabling device (0106 -> 0107)
[    0.272582] pci 0000:00:1e.0: setting latency timer to 64
[    0.272591] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.272597] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.272602] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.272608] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[    0.272614] pci_bus 0000:00: resource 8 [mem 0x7f700000-0xfed8ffff]
[    0.272619] pci_bus 0000:04: resource 0 [io  0xe000-0xefff]
[    0.272625] pci_bus 0000:04: resource 1 [mem 0xfa000000-0xfbffffff]
[    0.272631] pci_bus 0000:04: resource 2 [mem 0xce000000-0xdfffffff 64bit pref]
[    0.272637] pci_bus 0000:02: resource 0 [io  0x1000-0x1fff]
[    0.272643] pci_bus 0000:02: resource 1 [mem 0xf6000000-0xf9ffffff]
[    0.272648] pci_bus 0000:02: resource 2 [mem 0xc8000000-0xcdffffff 64bit pref]
[    0.272654] pci_bus 0000:01: resource 0 [io  0xd000-0xdfff]
[    0.272660] pci_bus 0000:01: resource 1 [mem 0xf5f00000-0xf5ffffff]
[    0.272666] pci_bus 0000:01: resource 2 [mem 0x7f700000-0x7f8fffff 64bit pref]
[    0.272672] pci_bus 0000:05: resource 4 [io  0x0000-0x0cf7]
[    0.272677] pci_bus 0000:05: resource 5 [io  0x0d00-0xffff]
[    0.272683] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[    0.272688] pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000dffff]
[    0.272694] pci_bus 0000:05: resource 8 [mem 0x7f700000-0xfed8ffff]
[    0.272751] NET: Registered protocol family 2
[    0.273033] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.273884] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.274276] TCP: Hash tables configured (established 131072 bind 65536)
[    0.274323] TCP: reno registered
[    0.274332] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.274348] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.274518] NET: Registered protocol family 1
[    0.274556] pci 0000:00:02.0: Boot video device
[    0.274870] PCI: CLS 32 bytes, default 64
[    0.274986] Trying to unpack rootfs image as initramfs...
[    1.086311] Freeing initrd memory: 20076k freed
[    1.100045] audit: initializing netlink socket (disabled)
[    1.100071] type=2000 audit(1350496600.096:1): initialized
[    1.147022] bounce pool size: 64 pages
[    1.147049] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.150647] VFS: Disk quotas dquot_6.5.2
[    1.150757] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.151978] fuse init (API version 7.20)
[    1.152204] msgmni has been set to 1728
[    1.153191] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    1.153263] io scheduler noop registered
[    1.153268] io scheduler deadline registered (default)
[    1.153283] io scheduler cfq registered
[    1.153565] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[    1.153724] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[    1.153878] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
[    1.154016] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.154059] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.154187] intel_idle: MWAIT substates: 0x10
[    1.154208] intel_idle: v0.4 model 0x1C
[    1.154211] intel_idle: lapic_timer_reliable_states 0x2
[    1.154401] ACPI: AC Adapter [AC0] (off-line)
[    1.154631] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[    1.159201] ACPI: Lid Switch [LID]
[    1.159305] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[    1.159314] ACPI: Sleep Button [SLPB]
[    1.159398] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[    1.159405] ACPI: Power Button [PWRB]
[    1.159497] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    1.159504] ACPI: Power Button [PWRF]
[    1.177031] thermal LNXTHERM:00: registered as thermal_zone0
[    1.177037] ACPI: Thermal Zone [TZ00] (25 C)
[    1.177128] GHES: HEST is not enabled!
[    1.177171] isapnp: Scanning for PnP cards...
[    1.255837] ACPI: Battery Slot [BAT0] (battery present)
[    1.530703] isapnp: No Plug & Play device found
[    1.530900] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.534407] Linux agpgart interface v0.103
[    1.534559] agpgart-intel 0000:00:00.0: Intel GMA3150 Chipset
[    1.534663] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
[    1.534843] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[    1.535101] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xb0000000
[    1.538665] brd: module loaded
[    1.540581] loop: module loaded
[    1.540825] ahci 0000:00:1f.2: version 3.0
[    1.540933] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[    1.541028] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x1 impl SATA mode
[    1.541036] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part 
[    1.541044] ahci 0000:00:1f.2: setting latency timer to 64
[    1.541926] scsi0 : ahci
[    1.542108] scsi1 : ahci
[    1.542260] scsi2 : ahci
[    1.542413] scsi3 : ahci
[    1.542507] ata1: SATA max UDMA/133 abar m1024@0xf5cf7800 port 0xf5cf7900 irq 43
[    1.542512] ata2: DUMMY
[    1.542515] ata3: DUMMY
[    1.542519] ata4: DUMMY
[    1.543277] libphy: Fixed MDIO Bus: probed
[    1.543397] tun: Universal TUN/TAP device driver, 1.6
[    1.543401] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.543516] PPP generic driver version 2.4.2
[    1.543634] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.543712] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    1.543720] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    1.543737] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    1.547647] ehci_hcd 0000:00:1d.7: debug port 1
[    1.547660] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    1.547693] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf5cf7c00
[    1.556037] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.556085] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.556091] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.556097] usb usb1: Product: EHCI Host Controller
[    1.556102] usb usb1: Manufacturer: Linux 3.6.0-030600-generic ehci_hcd
[    1.556107] usb usb1: SerialNumber: 0000:00:1d.7
[    1.556380] hub 1-0:1.0: USB hub found
[    1.556391] hub 1-0:1.0: 8 ports detected
[    1.556546] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.556587] uhci_hcd: USB Universal Host Controller Interface driver
[    1.556631] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    1.556638] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.556650] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.556685] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000c400
[    1.556754] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.556760] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.556766] usb usb2: Product: UHCI Host Controller
[    1.556771] usb usb2: Manufacturer: Linux 3.6.0-030600-generic uhci_hcd
[    1.556775] usb usb2: SerialNumber: 0000:00:1d.0
[    1.557043] hub 2-0:1.0: USB hub found
[    1.557054] hub 2-0:1.0: 2 ports detected
[    1.557179] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    1.557187] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.557199] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    1.557249] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c480
[    1.557316] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.557322] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.557327] usb usb3: Product: UHCI Host Controller
[    1.557332] usb usb3: Manufacturer: Linux 3.6.0-030600-generic uhci_hcd
[    1.557337] usb usb3: SerialNumber: 0000:00:1d.1
[    1.557594] hub 3-0:1.0: USB hub found
[    1.557604] hub 3-0:1.0: 2 ports detected
[    1.557731] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    1.557738] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.557753] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    1.557802] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c800
[    1.557868] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.557875] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.557880] usb usb4: Product: UHCI Host Controller
[    1.557885] usb usb4: Manufacturer: Linux 3.6.0-030600-generic uhci_hcd
[    1.557890] usb usb4: SerialNumber: 0000:00:1d.2
[    1.558130] hub 4-0:1.0: USB hub found
[    1.558141] hub 4-0:1.0: 2 ports detected
[    1.558262] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    1.558269] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    1.558280] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    1.558333] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000c880
[    1.558398] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    1.558405] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.558410] usb usb5: Product: UHCI Host Controller
[    1.558415] usb usb5: Manufacturer: Linux 3.6.0-030600-generic uhci_hcd
[    1.558420] usb usb5: SerialNumber: 0000:00:1d.3
[    1.558658] hub 5-0:1.0: USB hub found
[    1.558668] hub 5-0:1.0: 2 ports detected
[    1.558914] usbcore: registered new interface driver libusual
[    1.559011] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.576128] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.576146] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.576444] mousedev: PS/2 mouse device common for all mice
[    1.577467] rtc_cmos 00:03: RTC can wake from S4
[    1.577655] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    1.577692] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    1.577862] device-mapper: uevent: version 1.0.3
[    1.578008] device-mapper: ioctl: 4.23.0-ioctl (2012-07-25) initialised: dm-devel@redhat.com
[    1.578080] EISA: Probing bus 0 at eisa.0
[    1.578085] EISA: Cannot allocate resource for mainboard
[    1.578089] Cannot allocate resource for EISA slot 1
[    1.578093] Cannot allocate resource for EISA slot 2
[    1.578096] Cannot allocate resource for EISA slot 3
[    1.578099] Cannot allocate resource for EISA slot 4
[    1.578102] Cannot allocate resource for EISA slot 5
[    1.578105] Cannot allocate resource for EISA slot 6
[    1.578109] Cannot allocate resource for EISA slot 7
[    1.578112] Cannot allocate resource for EISA slot 8
[    1.578115] EISA: Detected 0 cards.
[    1.578213] cpuidle: using governor ladder
[    1.578334] cpuidle: using governor menu
[    1.578338] EFI Variables Facility v0.08 2004-May-17
[    1.578824] ashmem: initialized
[    1.579112] TCP: cubic registered
[    1.579350] NET: Registered protocol family 10
[    1.579712] NET: Registered protocol family 17
[    1.579739] Key type dns_resolver registered
[    1.580173] Using IPI No-Shortcut mode
[    1.580433] PM: Hibernation image not present or could not be loaded.
[    1.580457] registered taskstats version 1
[    1.586241] Key type trusted registered
[    1.591565] Key type encrypted registered
[    1.597714]   Magic number: 0:995:946
[    1.597779] tty tty3: hash matches
[    1.597817] cpu cpu1: hash matches
[    1.597873] rtc_cmos 00:03: setting system clock to 2012-10-17 17:56:41 UTC (1350496601)
[    1.598008] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.598012] EDD information not available.
[    1.609704] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    1.860046] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.861379] ata1.00: unexpected _GTF length (8)
[    1.868038] usb 1-6: new high-speed USB device number 2 using ehci_hcd
[    1.914029] ata1.00: ATA-8: ST9320325AS, 0003SDM1, max UDMA/133
[    1.914036] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    1.916503] ata1.00: unexpected _GTF length (8)
[    1.916860] ata1.00: configured for UDMA/133
[    1.917131] scsi 0:0:0:0: Direct-Access     ATA      ST9320325AS      0003 PQ: 0 ANSI: 5
[    1.917512] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    1.917599] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.917707] sd 0:0:0:0: [sda] Write Protect is off
[    1.917717] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.917803] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.957818]  sda: sda1 sda2 sda4
[    1.958648] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.958798] Freeing unused kernel memory: 760k freed
[    1.959294] Write protecting the kernel text: 6064k
[    1.959347] Write protecting the kernel read-only data: 2496k
[    1.959351] NX-protecting the kernel data: 4176k
[    2.000207] udevd[113]: starting version 175
[    2.076192] [drm] Initialized drm 1.1.0 20060810
[    2.085577] wmi: Mapper loaded
[    2.098456] i915 0000:00:02.0: setting latency timer to 64
[    2.099184] i915 0000:00:02.0: irq 44 for MSI/MSI-X
[    2.099216] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    2.099221] [drm] Driver supports precise vblank timestamp query.
[    2.113647] atl1c 0000:01:00.0: version 1.0.1.0-NAPI
[    2.124763] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem
[    2.124775] vgaarb: transferring owner from PCI:0000:00:02.0 to PCI:0000:04:00.0
[    2.515894] [drm] initialized overlay support
[    2.551313] fbcon: inteldrmfb (fb0) is primary device
[    2.919598] usb 1-6: New USB device found, idVendor=13d3, idProduct=5702
[    2.919603] usb 1-6: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    2.919607] usb 1-6: Product: USB2.0 UVC VGA WebCam
[    2.919610] usb 1-6: Manufacturer: Azurewave
[    2.919613] usb 1-6: SerialNumber: 200901010001
[    3.040069] hub 1-0:1.0: unable to enumerate USB device on port 7
[    3.600033] [drm:intel_lvds_enable] *ERROR* timed out waiting for panel to power on
[    1.917963] ACPI: Invalid Power Resource to register!
[    3.600058] Console: switching to colour frame buffer device 170x48
[    3.611671] fb0: inteldrmfb frame buffer device
[    3.611675] drm: registered panic notifier
[    3.611789] [Firmware Bug]: ACPI(GFX0) defines _DOD but not _DOS
[    3.611835] ACPI: Video Device [GFX0] (multi-head: yes  rom: yes  post: no)
[    3.611965] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:26/LNXVIDEO:00/input/input5
[    3.640293] ACPI Warning: _BQC returned an invalid level (20120711/video-472)
[    3.647592] acpi device:2c: registered as cooling_device4
[    3.647696] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[    3.647853] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input6
[    3.648117] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   10.143680] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[   13.057131] init: ureadahead main process (305) terminated with status 5
[   18.069662] Adding 4003836k swap on /dev/sda2.  Priority:-1 extents:1 across:4003836k 
[   18.175840] udevd[513]: starting version 175
[   18.679243] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   19.322040] lp: driver loaded but no devices found
[   21.513284] ACPI Warning: 0x00000828-0x0000082f SystemIO conflicts with Region \PMIO 1 (20120711/utaddress-251)
[   21.513306] ACPI Warning: 0x00000828-0x0000082f SystemIO conflicts with Region \_SB_.PCI0.SBRG.IELK.GPSE 2 (20120711/utaddress-251)
[   21.513321] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   21.513331] ACPI Warning: 0x00000480-0x000004bf SystemIO conflicts with Region \_SB_.PCI0.SBRG.GPBX 1 (20120711/utaddress-251)
[   21.513344] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   21.513349] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   21.546722] microcode: CPU0 sig=0x106ca, pf=0x8, revision=0x107
[   21.685815] asus_wmi: ASUS WMI generic driver loaded
[   21.714650] asus_wmi: Initialization: 0x0asus_wmi: BIOS WMI version: 0.6
[   21.714952] asus_wmi: SFUN value: 0x0<6>[   21.716629] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input7
[   21.951629] microcode: CPU1 sig=0x106ca, pf=0x8, revision=0x107
[   21.957344] microcode: CPU2 sig=0x106ca, pf=0x8, revision=0x107
[   21.961010] microcode: CPU3 sig=0x106ca, pf=0x8, revision=0x107
[   21.966044] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[   22.025521] asus_wmi: Backlight controlled by ACPI video driver
[   22.691843] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.4, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0400, board id: 3655, fw id: 650187
[   22.762197] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
[   23.365830] Linux video capture interface: v2.00
[   23.613212] uvcvideo: Found UVC 1.00 device USB2.0 UVC VGA WebCam (13d3:5702)
[   23.631888] input: USB2.0 UVC VGA WebCam as /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/input/input9
[   23.632331] usbcore: registered new interface driver uvcvideo
[   23.632338] USB Video Class driver (1.1.1)
[   24.905867] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[   25.004188] type=1400 audit(1350489424.903:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=779 comm="apparmor_parser"
[   25.004208] type=1400 audit(1350489424.903:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=778 comm="apparmor_parser"
[   25.005646] type=1400 audit(1350489424.903:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=779 comm="apparmor_parser"
[   25.005666] type=1400 audit(1350489424.903:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=778 comm="apparmor_parser"
[   25.006476] type=1400 audit(1350489424.903:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=779 comm="apparmor_parser"
[   25.006494] type=1400 audit(1350489424.903:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=778 comm="apparmor_parser"
[   25.043821] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   25.044236] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   27.115717] init: failsafe main process (854) killed by TERM signal
[   30.178457] type=1400 audit(1350489430.075:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=949 comm="apparmor_parser"
[   30.179360] type=1400 audit(1350489430.075:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=949 comm="apparmor_parser"
[   30.179862] type=1400 audit(1350489430.075:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=949 comm="apparmor_parser"
[   30.362175] type=1400 audit(1350489430.263:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=948 comm="apparmor_parser"
[   30.365575] type=1400 audit(1350489430.263:12): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=947 comm="apparmor_parser"
[   30.435530] type=1400 audit(1350489430.335:13): apparmor="STATUS" operation="profile_load" name="/usr/bin/freshclam" pid=952 comm="apparmor_parser"
[   30.814596] type=1400 audit(1350489430.715:14): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld" pid=955 comm="apparmor_parser"
[   30.849402] type=1400 audit(1350489430.747:15): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=954 comm="apparmor_parser"
[   30.850720] type=1400 audit(1350489430.747:16): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=954 comm="apparmor_parser"
[   30.930694] type=1400 audit(1350489430.827:17): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld-akonadi" pid=956 comm="apparmor_parser"
[   32.969480] ppdev: user-space parallel port driver
[   33.685515] Bluetooth: Core ver 2.16
[   33.685575] NET: Registered protocol family 31
[   33.685580] Bluetooth: HCI device and connection manager initialized
[   33.685584] Bluetooth: HCI socket layer initialized
[   33.685588] Bluetooth: L2CAP socket layer initialized
[   33.685599] Bluetooth: SCO socket layer initialized
[   33.761018] Bluetooth: RFCOMM TTY layer initialized
[   33.761036] Bluetooth: RFCOMM socket layer initialized
[   33.761042] Bluetooth: RFCOMM ver 1.11
[   33.964101] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   33.964110] Bluetooth: BNEP filters: protocol multicast
[   35.411391] audit_printk_skb: 42 callbacks suppressed
[   35.411398] type=1400 audit(1350489435.307:32): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/mysqld" pid=1114 comm="apparmor_parser"
[   35.442315] init: kdm main process (1083) killed by TERM signal
[   35.453812] init: lightdm main process (1118) killed by TERM signal
[   42.037630] atl1c 0000:01:00.0: irq 46 for MSI/MSI-X
[   42.038098] atl1c 0000:01:00.0: atl1c: eth2 NIC Link is Up<100 Mbps Full Duplex>
[   65.429972] init: anacron main process (1095) killed by TERM signal
[   94.825165] accounts-daemon[1862]: segfault at 4d ip b76f6ad4 sp bf801a8c error 6 in libdbus-1.so.3.5.8[b76d7000+47000]
[  284.990440] init: sav-protect post-start process (4005) terminated with status 1
[  293.463808] vboxdrv: Found 4 processor cores.
[  293.465732] vboxdrv: fAsync=0 offMin=0x68a offMax=0x2ef8
[  293.465958] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[  293.465964] vboxdrv: Successfully loaded version 4.2.0 (interface 0x001a0004).
[  293.800461] vboxpci: IOMMU not found (not registered)
[  299.106834] init: plymouth-stop pre-start process (7950) terminated with status 1

Codice: Seleziona tutto

dmesg | tail

Codice: Seleziona tutto

[   38.878764] atl1c 0000:01:00.0: atl1c: eth2 NIC Link is Up<100 Mbps Full Duplex>
[   93.624424] show_signal_msg: 27 callbacks suppressed
[   93.624435] accounts-daemon[1829]: segfault at 4 ip b775bd12 sp bfd88468 error 6 in libdbus-1.so.3.5.8[b7732000+47000]
[  287.050794] init: sav-protect post-start process (4130) terminated with status 1
[  294.660187] vboxdrv: Found 4 processor cores.
[  294.676216] vboxdrv: fAsync=0 offMin=0x786 offMax=0x1ede
[  294.676457] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[  294.676465] vboxdrv: Successfully loaded version 4.2.0 (interface 0x001a0004).
[  295.009255] vboxpci: IOMMU not found (not registered)
[  299.316610] init: plymouth-stop pre-start process (8016) terminated with status 1