Forum Ubuntu-it

cosi cosi,oltre alla salute problemi al lavoro,credo che a fine anno mollo,altrimenti ci lascio le penne.

oramai penso che forse sto meglio di la.

Scusate il ritardo nell'aggiornarvi. Allora, ho installato la 12.10. La stampante è installata e riconosciuta. C'è solo un problema, si disabilita a ogni spegnimento e devo riabilitarla io ogni volta. Può dipendere da qualche pacchetto mancante? Ho provato a controllare con synaptic, solo che non riesco a utilizzarlo con i privilegi di amministrazione o_O

Npn devo cambiare stampante, vero? Anche perché domani è l'ultimo giorno utile :-P

al prossimo riavvio e prima di averla aggiunta nuovamente posta

Codice: Seleziona tutto

hp-check -r

Allora, ho dato il comando pensando che la stampante fosse disabilitata, ma dopo aver ottenuto l'output ho controllato nel pannello di gestione stampanti ed era abilitata e funzionante. Dall'output mi sembra di capire che manchino non pochi pacchetti, ma aspetto un vostro parere. Fammi comunque sapere se preferisci che ridia il comando a stampante disinstallata. :-)

Codice: Seleziona tutto

HP Linux Imaging and Printing System (ver. 3.12.6)
Dependency/Version Check Utility ver. 15

Copyright (c) 2001-14 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the
HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies
are installed to successfully compile HPLIP.                                    
2. Run-time check mode (-r or --run): Use this mode to determine if a distro    
supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball   
has the proper dependencies installed to successfully run.                      
3. Both compile- and run-time check mode (-b or --both) (Default): This mode    
will check both of the above cases (both compile- and run-time dependencies).   

Check types:                                                                    
a. EXTERNALDEP - External Dependencies                                          
b. GENERALDEP - General Dependencies (required both at compile and run time)    
c. COMPILEDEP - Compile time Dependencies                                       
d. [All are run-time checks]                                                    
PYEXT SCANCONF QUEUES PERMISSION                                                

Status Types:
    OK
    MISSING       - Missing Dependency or Permission or Plug-in
    INCOMPAT      - Incompatible dependency-version or Plugin-version

Saving output in log file: /home/gianmaria/hp-check.log

Initializing. Please wait...
warning: ubuntu-12.10 version is not supported. Using ubuntu-12.04 versions dependencies to verify and install...

---------------
| SYSTEM INFO |
---------------

 Kernel: 3.5.0-22-generic #34-Ubuntu SMP Tue Jan 8 21:41:11 UTC 2013 GNU/Linux
 Host: gianmaria-System-Product-Name
 Proc: 3.5.0-22-generic #34-Ubuntu SMP Tue Jan 8 21:41:11 UTC 2013 GNU/Linux
 Distribution: ubuntu 12.10

-----------------------
| HPLIP CONFIGURATION |
-----------------------

HPLIP-Version: HPLIP 3.12.6
HPLIP-Home: /usr/share/hplip
warning: HPLIP-Installation: Auto installation is not supported for ubuntu distro  12.10 version 

Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf.  Generated from hplip.conf.in by configure.

[hplip]
version=3.12.6

[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/hplip/HP
ppdbase=/usr/share/ppd/hplip
doc=/usr/share/doc/hplip-doc/HTML
icon=no
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv

# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
libusb01-build=no
pp-build=yes
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=yes
foomatic-drv-install=yes
foomatic-ppd-install=yes
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.12.6
restricted-build=no
ui-toolkit=qt4
qt3=no
qt4=yes
policy-kit=yes
hpijs-only-build=no
lite-build=no
udev-acl-rules=yes
udev_sysfs_rules=no
hpcups-only-build=no
hpijs-only-build=no


Current contents of '/var/lib/hp/hplip.state' file:
Plugins are not installed. Could not access file: File o directory non esistente

Current contents of '~/.hplip/hplip.conf' file:
[installation]
date_time = 10/01/2013 16:53:55
version = 3.12.6


 <Package-name>        <Package-Desc>      <Required/Optional> <Min-Version> <Installed-Version> <Status>   <Comment>

--------------------------
|  External Dependencies |
--------------------------

 gs                   Ghostscript               REQUIRED        7.05            9.06            OK         -
 network              Network-wget              OPTIONAL        -               1.13.4          OK         -
 error: dbus          DBus                      REQUIRED        -               1.6.4           MISSING    'DBUS may not be installed or not running'
 scanimage            Shell-Scanning            OPTIONAL        1.0             1.0.23          OK         -
 policykit            Admin-Policy-framework    OPTIONAL        -               0.104           OK         -
 error: xsane         SANE-GUI                  OPTIONAL        0.9             -               MISSING    'xsane needs to be installed'
 error: cups          CUPS                      REQUIRED        1.1             -               INCOMPAT   'CUPS may not be installed or not running'

-------------------------
|  General Dependencies |
-------------------------

 reportlab            Python-PDF-Lib            OPTIONAL        2.0             2.5             OK         -
 error: libcrypto     OpenSSL-Crypto-Lib        REQUIRED        -               1.0.1           MISSING    'libcrypto needs to be installed'
 pil                  Python-Image-Lib          OPTIONAL        -               1.1.7           OK         -
 pyqt4-dbus           PyQt4-DBUS                REQUIRED        4.0             4.9.3           OK         -
 error: libjpeg       JPEG-Lib                  REQUIRED        -               -               MISSING    'libjpeg needs to be installed'
 libpthread           POSIX-Threads-Lib         REQUIRED        -               2.15            OK         -
 python-dbus          Python-DBUS               REQUIRED        0.80.0          1.1.1           OK         -
 error: cups-ddk      CUPS-DDK                  OPTIONAL        -               -               MISSING    'cups-ddk needs to be installed'
 error: python-devel  Python-SDK                REQUIRED        2.2             2.7.3           MISSING    'python-devel needs to be installed'
 pyqt4                Python-Qt4                REQUIRED        4.0             4.9.3           OK         -
 error: cups-devel    CUPS-SDK                  REQUIRED        -               -               MISSING    'cups-devel needs to be installed'
 error: sane-devel    SANE-SDK                  REQUIRED        -               -               MISSING    'sane-devel needs to be installed'
 error: libusb        USB-Lib                   REQUIRED        -               1.0             MISSING    'libusb needs to be installed'
 sane                 Scan-Lib                  REQUIRED        -               -               OK         -
 error: cups-image    CUPS-Image-Lib            REQUIRED        -               -               MISSING    'cups-image needs to be installed'
 error: libnetsnmp-devel SNMP-Networking-SDK       REQUIRED        5.0.9           5.4.3           MISSING    'libnetsnmp-devel needs to be installed'
 python-xml           Python-XML-Lib            REQUIRED        -               2.1.0           OK         -
 python-notify        Desktop-notifications     OPTIONAL        -               -               OK         -

----------------------
|  Python Extentions |
----------------------

 cupsext              CUPS-Extension            REQUIRED        -               3.12.6          OK         -
 pcardext             PhotoCard-Extension       REQUIRED        -               3.12.6          OK         -
 hpmudext             IO-Extension              REQUIRED        -               3.12.6          OK         -

-----------------------
|  Scan Configuration |
-----------------------

 hpaio                HPLIP-SANE-Backend        REQUIRED        -               3.12.6          OK         'hpaio found in /etc/sane.d/dll.conf'
 scanext              Scan-SANE-Extension       REQUIRED        -               3.12.6          OK         -

------------------------------
| DISCOVERED SCANNER DEVICES |
------------------------------

No Scanner found.

--------------------------
| DISCOVERED USB DEVICES |
--------------------------

No devices found.

---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------

 
HP-Deskjet-3520-series
----------------------
Type: Printer
Device URI: hp:/usb/Deskjet_3520_series?serial=CN29D129MX05SY
PPD: /etc/cups/ppd/HP-Deskjet-3520-series.ppd
PPD Description: HP Deskjet 3520 Series, hpcups 3.12.6
Printer status: printer HP-Deskjet-3520-series is idle.  enabled since gio 10 gen 2013 14:46:42 CET

HP Linux Imaging and Printing System (ver. 3.12.6)
System Tray Status Service ver. 2.0

Copyright (c) 2001-14 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

/usr/lib/python2.7/dist-packages/gtk-2.0/gtk/__init__.py:127: RuntimeWarning: PyOS_InputHook is not available for interactive use of PyGTK
  set_interactive(1)
error: Unable to communicate with device (code=12): hp:/usb/Deskjet_3520_series?serial=CN29D129MX05SY
error: Device not found
error: Communication status: Failed


--------------
| PERMISSION |
--------------

error: groups   user-groups                    Required        -        -        MISSING  ['lp']
 
-----------
| SUMMARY |
-----------

Missing Required Dependencies
-----------------------------
error: 'libdbus-1-dev' package is missing/incompatible 
error: 'libcups2' package is missing/incompatible 
error: 'openssl' package is missing/incompatible 
error: 'libjpeg62-dev' package is missing/incompatible 
error: 'libcupsimage2-dev' package is missing/incompatible 
error: 'python-dev' package is missing/incompatible 
error: 'libcups2-dev' package is missing/incompatible 
error: 'cups-bsd' package is missing/incompatible 
error: 'cups-client' package is missing/incompatible 
error: 'libsane-dev' package is missing/incompatible 
error: 'libusb-1.0.0-dev' package is missing/incompatible 
error: 'libcupsimage2-dev' package is missing/incompatible 
error: 'libsnmp-dev' package is missing/incompatible 

Missing Optional Dependencies
-----------------------------
error: 'gtk2-engines-pixbuf' package is missing/incompatible 
error: 'xsane' package is missing/incompatible 
error: 'cups' package is missing/incompatible 


Total Errors: 18
Total Warnings: 0

Re-run 'hp-check --fix' command to prompt and fix the issues. 

Done.

il problema sta qui

error: groups user-groups Required - - MISSING ['lp']
ecco il mio
diabolik62 adm dialout cdrom plugdev lpadmin admin sambashare

e questo è il mio:

adm cdrom sudo dip plugdev lpadmin sambashare

Comunque, è strano. Ho provato ad avviare la sessione ospite e il problema si ripresenta. Stampante installata ma da abilitare con la spunta. la lascio disabilitata e quando chiudo la sessone ospite epr passare alla mia, è ancora così. Riavvio il sistema, accedo con il mio profilo e la stampante è abilitata. o_O

Eh, nessun aggiornamento? Il problema si ripresenta goni tanto. Non ho idea su come agire.

inizia ad aggiungerti al gruppo "lp"

Codice: Seleziona tutto

sudo gpasswd -a tuo_nome_utente lp

poi ci sono da risolvere anche questi errori se possibile

Codice: Seleziona tutto

Missing Required Dependencies
-----------------------------
error: 'libdbus-1-dev' package is missing/incompatible
error: 'libcups2' package is missing/incompatible
error: 'openssl' package is missing/incompatible
error: 'libjpeg62-dev' package is missing/incompatible
error: 'libcupsimage2-dev' package is missing/incompatible
error: 'python-dev' package is missing/incompatible
error: 'libcups2-dev' package is missing/incompatible
error: 'cups-bsd' package is missing/incompatible
error: 'cups-client' package is missing/incompatible
error: 'libsane-dev' package is missing/incompatible
error: 'libusb-1.0.0-dev' package is missing/incompatible
error: 'libcupsimage2-dev' package is missing/incompatible
error: 'libsnmp-dev' package is missing/incompatible

Missing Optional Dependencies
-----------------------------
error: 'gtk2-engines-pixbuf' package is missing/incompatible
error: 'xsane' package is missing/incompatible
error: 'cups' package is missing/incompatible

Ok, mi sono aggiunto al gruppo lp (che sta per?). Per gli errori come dovrei agire?

hai abilitato il tuo utente ad usare la stampante, cosi non dovrai abilitarla ogni volta,prova ad installarli, lp= linux printer

Non sembra aver funzionato. Ho ridato il comando per sicurezza. Proverò a installare i pacchetti mancanti. Se può essere d'aiuto, dietro la stampante c'è un led verde che lampeggia con frequenza irregolare, sia essa spenta o accesa. però si trova al di sopra del'attacco di alimentazione quindi non penso c'entri qualcosa.

Qui trovi i driver

i driver che installa da li sono identici a quelli di synaptic o software center
posta
sudo apt-get install xsane
sudo apt-get install cups
Ps)ha istallato hp-gui ?

Scusate il ritardo:

Risultato per cups:

Codice: Seleziona tutto

Lettura elenco dei pacchetti... Fatto
Generazione albero delle dipendenze       
Lettura informazioni sullo stato... Fatto
cups è già alla versione più recente.
I seguenti pacchetti sono stati installati automaticamente e non sono più richiesti:
  calligra-l10n-de calligra-l10n-engb calligra-l10n-it cdparanoia
  firefox-locale-de k3b k3b-data k3b-i18n kde-l10n-de kde-l10n-engb
  kde-l10n-it kde-l10n-zhcn kdevelop-l10n kdevelop-php-docs-l10n
  kdevelop-php-l10n language-pack-de language-pack-de-base
  language-pack-kde-de language-pack-kde-en language-pack-kde-it libflac++6
  libk3b6 libkcddb4
Usare "apt-get autoremove" per rimuoverli.
0 aggiornati, 0 installati, 0 da rimuovere e 0 non aggiornati.

Risulatato di xsane:

Codice: Seleziona tutto

Lettura elenco dei pacchetti... Fatto
Generazione albero delle dipendenze       
Lettura informazioni sullo stato... Fatto
xsane è già alla versione più recente.
I seguenti pacchetti sono stati installati automaticamente e non sono più richiesti:
  calligra-l10n-de calligra-l10n-engb calligra-l10n-it cdparanoia
  firefox-locale-de k3b k3b-data k3b-i18n kde-l10n-de kde-l10n-engb
  kde-l10n-it kde-l10n-zhcn kdevelop-l10n kdevelop-php-docs-l10n
  kdevelop-php-l10n language-pack-de language-pack-de-base
  language-pack-kde-de language-pack-kde-en language-pack-kde-it libflac++6
  libk3b6 libkcddb4
Usare "apt-get autoremove" per rimuoverli.
0 aggiornati, 0 installati, 0 da rimuovere e 0 non aggiornati.

hplip-gui è installato.

abbiamo un problema con la stessA stampante solo che io non ho esperienza come te e non idea di come fare...

io ho un problema analogo. Ho Ubuntu 10.04 sulla mia macchina. Non mi riconosce la stampante: lanciando hp-setup da terminale mi da "device not found"

Scusate di nuovo per il ritardo.

Allora, ho installato i pacchetti mancanti e il risultato di hp-check -r è questo:

Codice: Seleziona tutto

HP Linux Imaging and Printing System (ver. 3.12.6)
Dependency/Version Check Utility ver. 15

Copyright (c) 2001-14 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the
HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies
are installed to successfully compile HPLIP.                                    
2. Run-time check mode (-r or --run): Use this mode to determine if a distro    
supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball   
has the proper dependencies installed to successfully run.                      
3. Both compile- and run-time check mode (-b or --both) (Default): This mode    
will check both of the above cases (both compile- and run-time dependencies).   

Check types:                                                                    
a. EXTERNALDEP - External Dependencies                                          
b. GENERALDEP - General Dependencies (required both at compile and run time)    
c. COMPILEDEP - Compile time Dependencies                                       
d. [All are run-time checks]                                                    
PYEXT SCANCONF QUEUES PERMISSION                                                

Status Types:
    OK
    MISSING       - Missing Dependency or Permission or Plug-in
    INCOMPAT      - Incompatible dependency-version or Plugin-version

Saving output in log file: /home/gianmaria/hp-check.log

Initializing. Please wait...
warning: ubuntu-12.10 version is not supported. Using ubuntu-12.04 versions dependencies to verify and install...

---------------
| SYSTEM INFO |
---------------

 Kernel: 3.5.0-27-generic #46-Ubuntu SMP Mon Mar 25 20:00:05 UTC 2013 GNU/Linux
 Host: gianmaria-System-Product-Name
 Proc: 3.5.0-27-generic #46-Ubuntu SMP Mon Mar 25 20:00:05 UTC 2013 GNU/Linux
 Distribution: ubuntu 12.10

-----------------------
| HPLIP CONFIGURATION |
-----------------------

HPLIP-Version: HPLIP 3.12.6
HPLIP-Home: /usr/share/hplip
warning: HPLIP-Installation: Auto installation is not supported for ubuntu distro  12.10 version 

Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf.  Generated from hplip.conf.in by configure.

[hplip]
version=3.12.6

[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/hplip/HP
ppdbase=/usr/share/ppd/hplip
doc=/usr/share/doc/hplip-doc/HTML
icon=no
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv

# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
libusb01-build=no
pp-build=yes
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=yes
foomatic-drv-install=yes
foomatic-ppd-install=yes
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.12.6
restricted-build=no
ui-toolkit=qt4
qt3=no
qt4=yes
policy-kit=yes
hpijs-only-build=no
lite-build=no
udev-acl-rules=yes
udev_sysfs_rules=no
hpcups-only-build=no
hpijs-only-build=no


Current contents of '/var/lib/hp/hplip.state' file:
Plugins are not installed. Could not access file: File o directory non esistente

Current contents of '~/.hplip/hplip.conf' file:
[installation]
date_time = 07/04/2013 18:24:18
version = 3.12.6

[upgrade]
latest_available_version = 3.13.3
notify_upgrade = false
last_upgraded_time = 1363688665.04444
pending_upgrade_time = 0

[settings]
systray_visible = 0
systray_messages = 0

[last_used]
device_uri = 
printer_name = 
working_dir = .

[commands]
scan = /usr/bin/simple-scan %SANE_URI%

[refresh]
rate = 30
enable = false
type = 1

[polling]
enable = false
interval = 5
device_list = 

[fax]
voice_phone = 
email_address = 


 <Package-name>        <Package-Desc>      <Required/Optional> <Min-Version> <Installed-Version> <Status>   <Comment>

--------------------------
|  External Dependencies |
--------------------------

 gs                   Ghostscript               REQUIRED        7.05            9.06            OK         -
 network              Network-wget              OPTIONAL        -               1.13.4          OK         -
 dbus                 DBus                      REQUIRED        -               1.6.4           OK         -
 scanimage            Shell-Scanning            OPTIONAL        1.0             1.0.23          OK         -
 policykit            Admin-Policy-framework    OPTIONAL        -               0.104           OK         -
 xsane                SANE-GUI                  OPTIONAL        0.9             0.998           OK         -
 cups                 CUPS                      REQUIRED        1.1             1.6.1           OK         'CUPS Scheduler is running'

-------------------------
|  General Dependencies |
-------------------------

 reportlab            Python-PDF-Lib            OPTIONAL        2.0             2.5             OK         -
 libcrypto            OpenSSL-Crypto-Lib        REQUIRED        -               1.0.1           OK         -
 pil                  Python-Image-Lib          OPTIONAL        -               1.1.7           OK         -
 pyqt4-dbus           PyQt4-DBUS                REQUIRED        4.0             4.9.3           OK         -
 libjpeg              JPEG-Lib                  REQUIRED        -               -               OK         -
 libpthread           POSIX-Threads-Lib         REQUIRED        -               2.15            OK         -
 python-dbus          Python-DBUS               REQUIRED        0.80.0          1.1.1           OK         -
 python-devel         Python-SDK                REQUIRED        2.2             2.7.3           OK         -
 pyqt4                Python-Qt4                REQUIRED        4.0             4.9.3           OK         -
 cups-devel           CUPS-SDK                  REQUIRED        -               1.6.1           OK         -
 sane-devel           SANE-SDK                  REQUIRED        -               1.0.23          OK         -
 libusb               USB-Lib                   REQUIRED        -               1.0             OK         -
 sane                 Scan-Lib                  REQUIRED        -               1.0.23          OK         -
 cups-image           CUPS-Image-Lib            REQUIRED        -               1.6.1           OK         -
 libnetsnmp-devel     SNMP-Networking-SDK       REQUIRED        5.0.9           5.4.3           OK         -
 python-xml           Python-XML-Lib            REQUIRED        -               2.1.0           OK         -
 python-notify        Desktop-notifications     OPTIONAL        -               -               OK         -

----------------------
|  Python Extentions |
----------------------

 cupsext              CUPS-Extension            REQUIRED        -               3.12.6          OK         -
 pcardext             PhotoCard-Extension       REQUIRED        -               3.12.6          OK         -
 hpmudext             IO-Extension              REQUIRED        -               3.12.6          OK         -

-----------------------
|  Scan Configuration |
-----------------------

 hpaio                HPLIP-SANE-Backend        REQUIRED        -               3.12.6          OK         'hpaio found in /etc/sane.d/dll.conf'
 scanext              Scan-SANE-Extension       REQUIRED        -               3.12.6          OK         -

------------------------------
| DISCOVERED SCANNER DEVICES |
------------------------------

device `hpaio:/usb/Deskjet_3520_series?serial=CN29D129MX05SY' is a Hewlett-Packard Deskjet_3520_series all-in-one


--------------------------
| DISCOVERED USB DEVICES |
--------------------------

  Device URI                        Model                 
  --------------------------------  ----------------------
  hp:/usb/Deskjet_3520_series?seri  HP Deskjet 3520 series
  al=CN29D129MX05SY                                       

---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------

 
HP-Deskjet-3520-series
----------------------
Type: Printer
Device URI: hp:/usb/Deskjet_3520_series?serial=CN29D129MX05SY
PPD: /etc/cups/ppd/HP-Deskjet-3520-series.ppd
PPD Description: HP Deskjet 3520 Series, hpcups 3.12.6
Printer status: printer HP-Deskjet-3520-series is idle.  enabled since dom 07 apr 2013 18:18:00 CEST
Communication status: Good


--------------
| PERMISSION |
--------------

groups          user-groups                    Required        -        -        OK       gianmaria adm lp cdrom sudo dip plugdev lpadmin sambashare

USB             HP-Deskjet-3520-series         Required        -        -        OK       Node:'/dev/bus/usb/001/004' Perm:'  root  lp rw- rw- rw- rw- r--'

-----------
| SUMMARY |
-----------

Missing Required Dependencies
-----------------------------
None

Missing Optional Dependencies
-----------------------------
None


Total Errors: 0
Total Warnings: 0

No errors or warnings.

Done.

Pare che non ci siano più errori. E mis embra di capire che il mio account sia nel gruppo lp. Mi sbaglio?
Intanto, nei prossimi giorni controllerò se il problema si ripresenta.

Uff, il problema persiste. Qualche idea?

Ian85 [url=http://forum.ubuntu-it.org/viewtopic.php?p=4365799#p4365799][img]http://forum.ubuntu-it.org/images/icons/icona-cita.gif[/img][/url] ha scritto:Uff, il problema persiste. Qualche idea?

Mi sembra che l'output non segnali anomalie

Non ho capito bene qual'è esattamente il tuo problema

Forum Ubuntu-it

HP deskjet 3520: installata, riconosciuta ma non funzionante

Re: HP deskjet 3520: installata, riconosciuta ma non funzion

Re: HP deskjet 3520: installata, riconosciuta ma non funzion

Re: HP deskjet 3520: installata, riconosciuta ma non funzion

Re: HP deskjet 3520: installata, riconosciuta ma non funzion

Re: HP deskjet 3520: installata, riconosciuta ma non funzion

Re: HP deskjet 3520: installata, riconosciuta ma non funzion

Re: HP deskjet 3520: installata, riconosciuta ma non funzion

Re: HP deskjet 3520: installata, riconosciuta ma non funzion

Re: HP deskjet 3520: installata, riconosciuta ma non funzion

Re: HP deskjet 3520: installata, riconosciuta ma non funzion

Re: HP deskjet 3520: installata, riconosciuta ma non funzion

Re: HP deskjet 3520: installata, riconosciuta ma non funzion

Re: HP deskjet 3520: installata, riconosciuta ma non funzion

Re: HP deskjet 3520: installata, riconosciuta ma non funzion

Re: HP deskjet 3520: installata, riconosciuta ma non funzion

Re: HP deskjet 3520: installata, riconosciuta ma non funzion

Re: HP deskjet 3520: installata, riconosciuta ma non funzion

Re: HP deskjet 3520: installata, riconosciuta ma non funzion

Re: HP deskjet 3520: installata, riconosciuta ma non funzion

Re: HP deskjet 3520: installata, riconosciuta ma non funzion