Chiavetta Wind ZTE MF710 e Ubuntu

[yamamoto]

Niente da fare, sia lasciando montata la chiavetta sia facendo espelli.. la versione è la 12.04

[magozurlinux]

Usi Ubuntu 12.04 a 64bit?

[yamamoto]

32bit

[magozurlinux]

Crea questa regola UDEV:

Codice: Seleziona tutto

sudo gedit /etc/udev/rules.d/45-zte_mf710.rules

copia e incolla queste righe

Codice: Seleziona tutto

SUBSYSTEM=="usb", ATTRS{idVendor}=="19d2", ATTRS{idProduct}=="1588", \
RUN+="/sbin/modprobe usbserial vendor=0x19d2 product=0x1588"

salva ed esci dall'editor di testo.

Codice: Seleziona tutto

sudo service udev restart

Riavvia il pc.

Da terminale postami questi comandi:

Codice: Seleziona tutto

lsusb

Codice: Seleziona tutto

dmesg | tail

Codice: Seleziona tutto

dmesg | grep usb

[yamamoto]

Immagino tu intenda con chiavetta inserita.. noto che l'id product in lsusb non è più doppio ma solo 1589 sia montata che non..

Codice: Seleziona tutto

ubuntu@ubuntu-TW8-SW8-DW8:~$ lsusb
Bus 001 Device 002: ID 0bda:0158 Realtek Semiconductor Corp. USB 2.0 multicard reader
Bus 001 Device 003: ID 0408:20ba Quanta Computer, Inc. 
Bus 002 Device 004: ID 19d2:1589 ZTE WCDMA Technologies MSM 
Bus 002 Device 002: ID 0bda:8189 Realtek Semiconductor Corp. RTL8187B Wireless 802.11g 54Mbps Network Adapter
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

Codice: Seleziona tutto

ubuntu@ubuntu-TW8-SW8-DW8:~$ dmesg | tail
[  150.208168] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready
[  150.211064] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready
[  150.214365] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready
[  150.215740] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready
[  156.184754] sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
[  156.186866] sd 6:0:0:0: [sdb] Asking for cache data failed
[  156.186876] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[  207.896882] sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
[  207.899133] sd 6:0:0:0: [sdb] Asking for cache data failed
[  207.899144] sd 6:0:0:0: [sdb] Assuming drive cache: write through

Codice: Seleziona tutto

ubuntu@ubuntu-TW8-SW8-DW8:~$ dmesg | grep usb
[    0.273416] ACPI: bus type usb registered
[    0.273449] usbcore: registered new interface driver usbfs
[    0.273462] usbcore: registered new interface driver hub
[    0.273496] usbcore: registered new device driver usb
[    0.598510] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.598513] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.598516] usb usb1: Product: EHCI Host Controller
[    0.598519] usb usb1: Manufacturer: Linux 3.5.0-48-generic ehci_hcd
[    0.598522] usb usb1: SerialNumber: 0000:00:1a.7
[    0.636102] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.636105] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.636108] usb usb2: Product: EHCI Host Controller
[    0.636111] usb usb2: Manufacturer: Linux 3.5.0-48-generic ehci_hcd
[    0.636113] usb usb2: SerialNumber: 0000:00:1d.7
[    0.636613] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    0.636616] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.636619] usb usb3: Product: UHCI Host Controller
[    0.636622] usb usb3: Manufacturer: Linux 3.5.0-48-generic uhci_hcd
[    0.636625] usb usb3: SerialNumber: 0000:00:1a.0
[    0.636983] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    0.636986] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.636989] usb usb4: Product: UHCI Host Controller
[    0.636992] usb usb4: Manufacturer: Linux 3.5.0-48-generic uhci_hcd
[    0.636994] usb usb4: SerialNumber: 0000:00:1a.1
[    0.637336] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    0.637339] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.637342] usb usb5: Product: UHCI Host Controller
[    0.637345] usb usb5: Manufacturer: Linux 3.5.0-48-generic uhci_hcd
[    0.637348] usb usb5: SerialNumber: 0000:00:1d.0
[    0.637650] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    0.637653] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.637656] usb usb6: Product: UHCI Host Controller
[    0.637659] usb usb6: Manufacturer: Linux 3.5.0-48-generic uhci_hcd
[    0.637662] usb usb6: SerialNumber: 0000:00:1d.1
[    0.637959] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    0.637962] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.637965] usb usb7: Product: UHCI Host Controller
[    0.637968] usb usb7: Manufacturer: Linux 3.5.0-48-generic uhci_hcd
[    0.637970] usb usb7: SerialNumber: 0000:00:1d.2
[    0.638297] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[    0.638300] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.638303] usb usb8: Product: UHCI Host Controller
[    0.638306] usb usb8: Manufacturer: Linux 3.5.0-48-generic uhci_hcd
[    0.638309] usb usb8: SerialNumber: 0000:00:1d.3
[    0.638572] usbcore: registered new interface driver libusual
[    0.932128] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[    1.075047] usb 1-1: New USB device found, idVendor=0bda, idProduct=0158
[    1.075053] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.075057] usb 1-1: Product: USB2.0-CRW
[    1.075060] usb 1-1: Manufacturer: Generic
[    1.075062] usb 1-1: SerialNumber: 20071114173400000
[    1.084706] usbcore: registered new interface driver usb-storage
[    1.101372] scsi6 : usb-storage 1-1:1.0
[    1.101481] usbcore: registered new interface driver ums-realtek
[    1.192053] usb 1-4: new high-speed USB device number 3 using ehci_hcd
[    1.344922] usb 1-4: New USB device found, idVendor=0408, idProduct=20ba
[    1.344926] usb 1-4: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[    1.344929] usb 1-4: Product: USB Webcam
[    1.344932] usb 1-4: Manufacturer: SN001
[    1.456054] usb 2-7: new high-speed USB device number 2 using ehci_hcd
[    1.595682] usb 2-7: New USB device found, idVendor=0bda, idProduct=8189
[    1.595686] usb 2-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.595690] usb 2-7: Product: RTL8187B_WLAN_Adapter
[    1.595693] usb 2-7: Manufacturer: Manufacturer_Realtek
[    1.595695] usb 2-7: SerialNumber: 00e04c000001
[   14.839297] input: USB Webcam as /devices/pci0000:00/0000:00:1a.7/usb1/1-4/1-4:1.0/input/input5
[   14.839948] usbcore: registered new interface driver uvcvideo
[   15.843340] usbcore: registered new interface driver rtl8187
[  107.920112] usb 2-2: new high-speed USB device number 3 using ehci_hcd
[  108.053636] usb 2-2: New USB device found, idVendor=19d2, idProduct=1588
[  108.053642] usb 2-2: New USB device strings: Mfr=2, Product=3, SerialNumber=5
[  108.053646] usb 2-2: Product: ZTE Mobile Broadband Station
[  108.053649] usb 2-2: Manufacturer: ZTE,Incorporated
[  108.053652] usb 2-2: SerialNumber: 1234567890ABCDEFCP2617180KUE7JZ1TGF26X8_8_6D77&&&&&&&&&&&&&&&&&
[  108.059597] scsi7 : usb-storage 2-2:1.0
[  108.092872] usbcore: registered new interface driver usbserial
[  108.093294] usbcore: registered new interface driver usbserial_generic
[  108.093727] usbserial: USB Serial Driver core
[  109.127582] usb 2-2: USB disconnect, device number 3
[  109.892077] usb 2-2: new high-speed USB device number 4 using ehci_hcd
[  110.025254] usb 2-2: New USB device found, idVendor=19d2, idProduct=1589
[  110.025264] usb 2-2: New USB device strings: Mfr=10, Product=11, SerialNumber=13
[  110.025270] usb 2-2: Product: ZTE Mobile Broadband Station
[  110.025276] usb 2-2: Manufacturer: ZTE,Incorporated
[  110.025282] usb 2-2: SerialNumber: 1234567890ABCDEFCP2617180KUE7JZ1TGF26X8_8_6D77&&&&&&&&&&&&&&&&&
[  110.028787] scsi8 : usb-storage 2-2:1.6
[  110.143841] usbcore: registered new interface driver option
[  110.145241] usb 2-2: GSM modem (1-port) converter now attached to ttyUSB0
[  110.145412] usb 2-2: GSM modem (1-port) converter now attached to ttyUSB1
[  110.145554] usb 2-2: GSM modem (1-port) converter now attached to ttyUSB2
[  110.145689] usb 2-2: GSM modem (1-port) converter now attached to ttyUSB3
[  110.154606] cdc_ether 2-2:1.0: usb0: register 'cdc_ether' at usb-0000:00:1d.7-2, CDC Ethernet Device, 02:00:ff:aa:aa:aa
[  110.154940] usbcore: registered new interface driver cdc_ether
[  110.225079] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready
[  110.225271] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready
[  150.208168] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready
[  150.211064] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready
[  150.214365] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready
[  150.215740] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready

[magozurlinux]

Bus 002 Device 004: ID 19d2:1589 ZTE WCDMA Technologies MSM

[ 109.892077] usb 2-2: new high-speed USB device number 4 using ehci_hcd
[ 110.025254] usb 2-2: New USB device found, idVendor=19d2, idProduct=1589
[ 110.025264] usb 2-2: New USB device strings: Mfr=10, Product=11, SerialNumber=13
[ 110.025270] usb 2-2: Product: ZTE Mobile Broadband Station
[ 110.025276] usb 2-2: Manufacturer: ZTE,Incorporated
[ 110.025282] usb 2-2: SerialNumber: 1234567890ABCDEFCP2617180KUE7JZ1TGF26X8_8_6D77&&&&&&&&&&&&&&&&&
[ 110.028787] scsi8 : usb-storage 2-2:1.6
[ 110.143841] usbcore: registered new interface driver option
[ 110.145241] usb 2-2: GSM modem (1-port) converter now attached to ttyUSB0
[ 110.145412] usb 2-2: GSM modem (1-port) converter now attached to ttyUSB1
[ 110.145554] usb 2-2: GSM modem (1-port) converter now attached to ttyUSB2
[ 110.145689] usb 2-2: GSM modem (1-port) converter now attached to ttyUSB3
[ 110.154606] cdc_ether 2-2:1.0: usb0: register 'cdc_ether' at usb-0000:00:1d.7-2, CDC Ethernet Device, 02:00:ff:aa:aa:aa

Dagli outputs che hai postato con la regola udev che hai inserito, la chiavetta Internet reagisce bene; ai provato a connetterti ad Internet?

[yamamoto]

Leggo, sì fatti più tentativi.. appare sempre "rete modem - disconnessi" tranne appunto un paio di volte dove rifacendo la procedura in modifica connessioni -> banda larga è riuscita a connettersi

[magozurlinux]

Prova con sakis3g.

Scarica e segui le istruzioni da questa guida:

http://www.linuxmind-italia.org/index.php?topic=17178.0

[yamamoto]

Intanto grazie per gli sforzi. Sto tentando ma riscontro problemi, perchè selezionata l'interfaccia mi da errore "Port /dev/ttyUSB0 is currently occupied by [XXX] modem-manager"

[magozurlinux]

Intanto grazie per gli sforzi. Sto tentando ma riscontro problemi, perchè selezionata l'interfaccia mi da errore "Port /dev/ttyUSB0 is currently occupied by [XXX] modem-manager"

Prego, di nulla!

Quando da quell'errore da terminale dai questi comandi:

Codice: Seleziona tutto

ps aux | grep modem-manager

Codice: Seleziona tutto

sudo modprobe -r modem-manager

rilancia sakis3g.

[yamamoto]

Codice: Seleziona tutto

ubuntu@ubuntu-TW8-SW8-DW8:~$ ps aux | grep modem-manager
root      1120  1.4  0.1   7252  3228 ?        Ss   22:13   0:01 /usr/sbin/modem-manager
ubuntu    4749  0.0  0.0   4412   824 pts/0    S+   22:14   0:00 grep --color=auto modem-manager
ubuntu@ubuntu-TW8-SW8-DW8:~$ sudo modprobe -r modem-manager
[sudo] password for ubuntu: 
FATAL: Module modem_manager not found.

[magozurlinux]

Prova col comando suggerito da questo link:

http://tognolo.org/2012/04/disabilitare ... -su-linux/

[yamamoto]

Niente, sempre failed to connect. Ho provato con custom tty, e esce

Codice: Seleziona tutto

Device did not report GSM capabilities. You can skip this by adding --noprobe command line switch. 

A questo punto, può esser utile cambiare distro installandola ex novo?

[magozurlinux]

Da terminale dai questo comando senza la chiavetta Internet inserita:

Codice: Seleziona tutto

echo "options usb-storage delay_use=3" | sudo tee /etc/modprobe.d/usb-storage.conf

riavvia il pc.