Pagina 1 di 1

[DISPERAZIONE]Problema Card Reader Integrato...ormai sto cedendo....aiuto!!!

Inviato: mercoledì 14 febbraio 2007, 21:01
da Ramones1985
Salve, ho gia cercato e ho trovato topic, ma nessuno che abbia mai risolto.
Allora eseguendo lspci mi compare

Codice: Seleziona tutto

0000:06:01.3 Mass storage controller: Texas Instruments PCIxx21 Integrated FlashMedia Controller
Ora che devo fare? da quel poco che capisco, mi riconosce il lettore di schede...ma inserisco una scheda e niente...

in /mnt ho solo le 2 partizioni di windows (che ho fatto riconoscere)
/dev ...non c'è niente del card reader...

...nn trovo nulla in giro e non parte in automatico..CHE FARE???

ps: mi manca solo questo e un problemino col bluetooth e son apposto!!!

Re: Problema Card Reader Integrato

Inviato: mercoledì 14 marzo 2007, 22:23
da macro182
Anch'io ho questo problema...  :(

Re: Problema Card Reader Integrato

Inviato: mercoledì 4 aprile 2007, 1:30
da Ramones1985
....niente???

Re: Problema Card Reader Integrato

Inviato: mercoledì 4 aprile 2007, 4:43
da luxtux
Ramones1985 ha scritto: ....niente???
Ci vuole un kernel >= 2.6.19 , il modulo da caricare e' tifm.

Ciao
L.

Re: Problema Card Reader Integrato

Inviato: giovedì 5 aprile 2007, 17:19
da marfas

Re: Problema Card Reader Integrato

Inviato: giovedì 5 aprile 2007, 20:55
da Ramones1985
luxtux ha scritto:
Ramones1985 ha scritto: ....niente???
Ci vuole un kernel >= 2.6.19 , il modulo da caricare e' tifm.

Ciao
L.
azz...mi sa che è questo il problema....

Re: Problema Card Reader Integrato

Inviato: sabato 7 aprile 2007, 16:12
da Ramones1985
.....quando provo a installare quel file mi da

Codice: Seleziona tutto

Makefile: 1: obj-m: not found
Makefile: 5: shell: not found
Makefile: 5: KERNELDIR: not found
Makefile: 7: shell: not found
Makefile: 7: PWD: not found
Makefile: 8: shell: not found
Makefile: 8: MODULE_INSTALLDIR: not found
Makefile: 11: all:: not found
Makefile: 12: PWD: not found

Makefile: 13: MAKE: not found
Makefile: 13: KERNELDIR: not found
Makefile: 13: PWD: not found
Makefile: 13: -C: not found
Makefile: 15: clean:: not found
Makefile: 18: install:: not found
Makefile: 19: MODULE_INSTALLDIR: not found
mkdir: missing operand
Usare `mkdir --help' per ulteriori informazioni.
Makefile: 20: MODULE_INSTALLDIR: not found
Makefile: 21: MODULE_INSTALLDIR: not found
Makefile: 22: MODULE_INSTALLDIR: not found
Makefile: 24: MODULE_INSTALLDIR: not found
install: target `/kernel/drivers/misc/' is not a directory: Nessun file o directory
Makefile: 25: MODULE_INSTALLDIR: not found
install: target `/kernel/drivers/mmc/' is not a directory: Nessun file o directory
Che devo fare????

Re: Problema Card Reader Integrato

Inviato: sabato 7 aprile 2007, 19:30
da luxtux
Ramones1985 ha scritto: .....quando provo a installare quel file mi da

Codice: Seleziona tutto

Makefile: 1: obj-m: not found
Makefile: 5: shell: not found
Makefile: 5: KERNELDIR: not found
Makefile: 7: shell: not found
Makefile: 7: PWD: not found
Makefile: 8: shell: not found
Makefile: 8: MODULE_INSTALLDIR: not found
Makefile: 11: all:: not found
Makefile: 12: PWD: not found

Makefile: 13: MAKE: not found
Makefile: 13: KERNELDIR: not found
Makefile: 13: PWD: not found
Makefile: 13: -C: not found
Makefile: 15: clean:: not found
Makefile: 18: install:: not found
Makefile: 19: MODULE_INSTALLDIR: not found
mkdir: missing operand
Usare `mkdir --help' per ulteriori informazioni.
Makefile: 20: MODULE_INSTALLDIR: not found
Makefile: 21: MODULE_INSTALLDIR: not found
Makefile: 22: MODULE_INSTALLDIR: not found
Makefile: 24: MODULE_INSTALLDIR: not found
install: target `/kernel/drivers/misc/' is not a directory: Nessun file o directory
Makefile: 25: MODULE_INSTALLDIR: not found
install: target `/kernel/drivers/mmc/' is not a directory: Nessun file o directory
Che devo fare????
Inizia con

Codice: Seleziona tutto

sudo apt-get install kernel-headers build-essential
poi vediamo.

Ciao
L.

Re: Problema Card Reader Integrato

Inviato: martedì 10 aprile 2007, 14:09
da Ramones1985
ecco cosa mi da
luca@ubuntu:~/Desktop$ sudo apt-get install kernel-headers build-essential
Lettura della lista dei pacchetti in corso... Fatto
Generazione dell'albero delle dipendenze in corso     
Reading state information... Fatto             
Il pacchetto kernel-headers non ha versioni disponibili, ma è nominato da un altro
pacchetto. Questo significa che il pacchetto manca, è diventato obsoleto
o è disponibile solo all'interno di un'altra sorgente
E: Il pacchetto kernel-headers non ha candidati da installare
Il kernel è nuovo!!!!

Come faccio a modificarlo n versione grafica???

i comandi
make menuconfig,make xconfig,make gconfig
mi danno tutti lo stesso errore

Codice: Seleziona tutto

make: *** No rule to make target `gconfig'. Stop.
IO NON SO COME FARE!!
TIFM NON ME LI INSTALLA!!

.....l'uscita del lspci è

Codice: Seleziona tutto

00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 03)
00:01.0 PCI bridge: Intel Corporation Mobile 915GM/PM Express PCI Express Root Port (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 04)
00:1c.1 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 (rev 04)
00:1c.2 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 3 (rev 04)
00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 04)
00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 04)
00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 04)
00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 04)
00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 04)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d4)
00:1e.2 Multimedia audio controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 04)
00:1e.3 Modem: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Modem Controller (rev 04)
00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 04)
00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller (rev 04)
00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 04)
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility X700 (PCIE)
06:01.0 CardBus bridge: Texas Instruments PCIxx21/x515 Cardbus Controller
06:01.2 FireWire (IEEE 1394): Texas Instruments OHCI Compliant IEEE 1394 Host Controller
[b]06:01.3 Mass storage controller: Texas Instruments PCIxx21 Integrated FlashMedia Controller[/b]
06:03.0 Network controller: Intel Corporation PRO/Wireless 2200BG Network Connection (rev 05)
06:08.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5788 Gigabit Ethernet (rev 03)
quindi me lo vede...

se faccio
sudo setpci -s 06:01:03
non succede niente..

IO NON SO PIÙ COSA FARE!!AIUTATEMI!

Re: [DISPERAZIONE]Problema Card Reader Integrato...ormai sto cedendo....aiuto!!!

Inviato: martedì 10 aprile 2007, 15:00
da ronin77
Ho anch'io un lettore di SD card della texas e uso ubuntu edgy.
Ho risolto il tuo stesso problema con l'aiuto di questo thread: in pratica ho aggiunto in "etc/modules" questi due moduli "tifm_core" e "tifm_sd" (non "tifm_7xx1", come dicono nello stesso thread).

Re: [DISPERAZIONE]Problema Card Reader Integrato...ormai sto cedendo....aiuto!!!

Inviato: martedì 10 aprile 2007, 15:04
da Ramones1985
ronin77 ha scritto: Ho anch'io un lettore di SD card della texas e uso ubuntu edgy.
Ho risolto il tuo stesso problema con l'aiuto di questo thread: in pratica ho aggiunto in "etc/modules" questi due moduli "tifm_core" e "tifm_sd" (non "tifm_7xx1", come dicono nello stesso thread).
...però se faccio
sudo modprobe tifm_core ...in uscita ho

Codice: Seleziona tutto

FATAL: Could not open '/lib/modules/2.6.20-14-generic/kernel/drivers/misc/tifm_core.ko': No such file or directory
......che è??

Re: [DISPERAZIONE]Problema Card Reader Integrato...ormai sto cedendo....aiuto!!!

Inviato: martedì 10 aprile 2007, 15:57
da Ramones1985
ps: nel kernel ho ho spuntato tutto quello che conteneva sd, mmc e tifm...

quando compilo i dirver tifm0.8 mi viene
make -C /lib/modules/2.6.20-14-generic/build M=/home/luca/tifm
make[1]: Entering directory `/usr/src/linux-headers-2.6.20-14-generic'
  CC [M]  /home/luca/tifm/tifm_sd.o
/home/luca/tifm/tifm_sd.c:16:32: error: linux/mmc/protocol.h: Nessun file o directory
/home/luca/tifm/tifm_sd.c: In function ‘tifm_sd_probe’:
/home/luca/tifm/tifm_sd.c:987: error: ‘struct mmc_host’ has no member named ‘max_sectors’
make[2]: *** [/home/luca/tifm/tifm_sd.o] Error 1
make[1]: *** [_module_/home/luca/tifm] Error 2
make[1]: Leaving directory `/usr/src/linux-headers-2.6.20-14-generic'
make: *** [all] Error 2
MA PERCHÈÈÈÈ???????

Re: [DISPERAZIONE]Problema Card Reader Integrato...ormai sto cedendo....aiuto!!!

Inviato: mercoledì 18 aprile 2007, 1:48
da 8solo5

Codice: Seleziona tutto

luca@ubuntu:~/Desktop$ sudo apt-get install kernel-headers build-essential
Lettura della lista dei pacchetti in corso... Fatto
Generazione dell'albero delle dipendenze in corso       
Reading state information... Fatto               
Il pacchetto kernel-headers non ha versioni disponibili, ma è nominato da un altro
pacchetto. Questo significa che il pacchetto manca, è diventato obsoleto
o è disponibile solo all'interno di un'altra sorgente
E: Il pacchetto kernel-headers non ha candidati da installare
anche io lo stesso problema con feisty e ultimo kernel aggiornato.

Re: [DISPERAZIONE]Problema Card Reader Integrato...ormai sto cedendo....aiuto!!!

Inviato: mercoledì 18 aprile 2007, 20:38
da Ramones1985
risolto con l'ultimo kernel.....

http://forum.ubuntu-it.org/viewforum.php?f=47.0

Re: [DISPERAZIONE]Problema Card Reader Integrato...ormai sto cedendo....aiuto!!!

Inviato: giovedì 19 aprile 2007, 2:15
da 8solo5
io ho già l'ultimo kernel... ;(

Re: [DISPERAZIONE]Problema Card Reader Integrato...ormai sto cedendo....aiuto!!!

Inviato: giovedì 19 aprile 2007, 10:48
da Ramones1985
8solo5 ha scritto: io ho già l'ultimo kernel... ;(
non so cosa dirti. ??? ???

Io ho seguito le istruzioni di questi 2 topic....

e niente...
...

poi quando mi ha automaticamente aggiornato il kernel, ho letot nel forum che a un altro utente è andato .
Ho inserito la scheda e magicamente è comparsa l'icona sul monitor.

mi disp.

Re: [DISPERAZIONE]Problema Card Reader Integrato...ormai sto cedendo....aiuto!!!

Inviato: sabato 5 maggio 2007, 14:59
da Fochetta
qualcuno ha risolto?