[risolto] avanzamento 18.04 - problema epson perfection v300

Riconoscimento, installazione e configurazione delle periferiche.

Re: avanzamento 18.04 - problema epson perfection v300 photo

Messaggioda leoleonardo » mercoledì 26 settembre 2018, 12:34

Eccoli
Codice: Seleziona tutto
leonardo@leonardo-System-Product-Name:~$ export SANE_DEBUG_DLL=255
leonardo@leonardo-System-Product-Name:~$ scanimage --test
[sanei_debug] Setting debug level of dll to 255.
[dll] sane_init: SANE dll backend version 1.0.13 from sane-backends 1.0.27
[dll] sane_init/read_dlld: attempting to open directory `./dll.d'
[dll] sane_init/read_dlld: attempting to open directory `/etc/sane.d/dll.d'
[dll] sane_init/read_dlld: using config directory `/etc/sane.d/dll.d'
[dll] sane_init/read_dlld: considering /etc/sane.d/dll.d/hplip
[dll] sane_init/read_config: reading dll.d/hplip
[dll] add_backend: adding backend `hpaio'
[dll] sane_init/read_dlld: considering /etc/sane.d/dll.d/libsane-extras
[dll] sane_init/read_config: reading dll.d/libsane-extras
[dll] add_backend: adding backend `ls5000'
[dll] sane_init/read_dlld: considering /etc/sane.d/dll.d/iscan
[dll] sane_init/read_config: reading dll.d/iscan
[dll] add_backend: adding backend `epkowa'
[dll] sane_init/read_dlld: done.
[dll] sane_init/read_config: reading dll.conf
[dll] add_backend: adding backend `net'
[dll] add_backend: adding backend `abaton'
[dll] add_backend: adding backend `agfafocus'
[dll] add_backend: adding backend `apple'
[dll] add_backend: adding backend `avision'
[dll] add_backend: adding backend `artec'
[dll] add_backend: adding backend `artec_eplus48u'
[dll] add_backend: adding backend `as6e'
[dll] add_backend: adding backend `bh'
[dll] add_backend: adding backend `canon'
[dll] add_backend: adding backend `canon630u'
[dll] add_backend: adding backend `canon_dr'
[dll] add_backend: adding backend `cardscan'
[dll] add_backend: adding backend `coolscan'
[dll] add_backend: adding backend `coolscan3'
[dll] add_backend: adding backend `dell1600n_net'
[dll] add_backend: adding backend `dmc'
[dll] add_backend: adding backend `epjitsu'
[dll] add_backend: adding backend `epkowa'
[dll] add_backend: `epkowa' is already there
[dll] add_backend: adding backend `epson'
[dll] add_backend: adding backend `epsonds'
[dll] add_backend: adding backend `fujitsu'
[dll] add_backend: adding backend `genesys'
[dll] add_backend: adding backend `gt68xx'
[dll] add_backend: adding backend `hp'
[dll] add_backend: adding backend `hp3900'
[dll] add_backend: adding backend `hpsj5s'
[dll] add_backend: adding backend `hp3500'
[dll] add_backend: adding backend `hp4200'
[dll] add_backend: adding backend `hp5400'
[dll] add_backend: adding backend `hp5590'
[dll] add_backend: adding backend `hpljm1005'
[dll] add_backend: adding backend `hs2p'
[dll] add_backend: adding backend `ibm'
[dll] add_backend: adding backend `kodak'
[dll] add_backend: adding backend `kodakaio'
[dll] add_backend: adding backend `kvs1025'
[dll] add_backend: adding backend `kvs20xx'
[dll] add_backend: adding backend `leo'
[dll] add_backend: adding backend `lexmark'
[dll] add_backend: adding backend `ma1509'
[dll] add_backend: adding backend `magicolor'
[dll] add_backend: adding backend `matsushita'
[dll] add_backend: adding backend `microtek'
[dll] add_backend: adding backend `microtek2'
[dll] add_backend: adding backend `mustek'
[dll] add_backend: adding backend `mustek_usb'
[dll] add_backend: adding backend `mustek_usb2'
[dll] add_backend: adding backend `nec'
[dll] add_backend: adding backend `niash'
[dll] add_backend: adding backend `pie'
[dll] add_backend: adding backend `pint'
[dll] add_backend: adding backend `pixma'
[dll] add_backend: adding backend `plustek'
[dll] add_backend: adding backend `qcam'
[dll] add_backend: adding backend `ricoh'
[dll] add_backend: adding backend `rts8891'
[dll] add_backend: adding backend `s9036'
[dll] add_backend: adding backend `sceptre'
[dll] add_backend: adding backend `sharp'
[dll] add_backend: adding backend `sm3600'
[dll] add_backend: adding backend `sm3840'
[dll] add_backend: adding backend `snapscan'
[dll] add_backend: adding backend `sp15c'
[dll] add_backend: adding backend `tamarack'
[dll] add_backend: adding backend `teco1'
[dll] add_backend: adding backend `teco2'
[dll] add_backend: adding backend `teco3'
[dll] add_backend: adding backend `u12'
[dll] add_backend: adding backend `umax'
[dll] add_backend: adding backend `umax1220u'
[dll] add_backend: adding backend `v4l'
[dll] add_backend: adding backend `xerox_mfp'
[dll] sane_get_devices
[dll] load: searching backend `xerox_mfp' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-xerox_mfp.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-xerox_mfp.so.1'
[dll] init: initializing backend `xerox_mfp'
[dll] init: backend `xerox_mfp' is version 1.0.13
[dll] load: searching backend `v4l' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-v4l.so.1'
[dll] load: couldn't open `/usr/lib/i386-linux-gnu/sane/libsane-v4l.so.1' (No such file or directory)
[dll] load: couldn't find backend `v4l' (No such file or directory)
[dll] load: searching backend `umax1220u' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-umax1220u.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-umax1220u.so.1'
[dll] init: initializing backend `umax1220u'
[dll] init: backend `umax1220u' is version 1.0.2
[dll] load: searching backend `umax' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-umax.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-umax.so.1'
[dll] init: initializing backend `umax'
[dll] init: backend `umax' is version 1.0.45
[dll] load: searching backend `u12' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-u12.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-u12.so.1'
[dll] init: initializing backend `u12'
[dll] init: backend `u12' is version 1.0.0
[dll] load: searching backend `teco3' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-teco3.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-teco3.so.1'
[dll] init: initializing backend `teco3'
[dll] init: backend `teco3' is version 1.0.1
[dll] load: searching backend `teco2' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-teco2.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-teco2.so.1'
[dll] init: initializing backend `teco2'
[dll] init: backend `teco2' is version 1.0.10
[dll] load: searching backend `teco1' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-teco1.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-teco1.so.1'
[dll] init: initializing backend `teco1'
[dll] init: backend `teco1' is version 1.0.10
[dll] load: searching backend `tamarack' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-tamarack.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-tamarack.so.1'
[dll] init: initializing backend `tamarack'
[dll] init: backend `tamarack' is version 1.0.0
[dll] load: searching backend `sp15c' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-sp15c.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-sp15c.so.1'
[dll] init: initializing backend `sp15c'
[dll] init: backend `sp15c' is version 1.0.0
[dll] load: searching backend `snapscan' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-snapscan.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-snapscan.so.1'
[dll] init: initializing backend `snapscan'
[dll] init: backend `snapscan' is version 1.4.53
[dll] load: searching backend `sm3840' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-sm3840.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-sm3840.so.1'
[dll] init: initializing backend `sm3840'
[dll] init: backend `sm3840' is version 1.0.0
[dll] load: searching backend `sm3600' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-sm3600.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-sm3600.so.1'
[dll] init: initializing backend `sm3600'
[dll] init: backend `sm3600' is version 1.0.6
[dll] load: searching backend `sharp' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-sharp.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-sharp.so.1'
[dll] init: initializing backend `sharp'
[dll] init: backend `sharp' is version 1.0.0
[dll] load: searching backend `sceptre' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-sceptre.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-sceptre.so.1'
[dll] init: initializing backend `sceptre'
[dll] init: backend `sceptre' is version 1.0.10
[dll] load: searching backend `s9036' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-s9036.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-s9036.so.1'
[dll] init: initializing backend `s9036'
[dll] init: backend `s9036' is version 1.0.0
[dll] load: searching backend `rts8891' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-rts8891.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-rts8891.so.1'
[dll] init: initializing backend `rts8891'
[dll] init: backend `rts8891' is version 1.0.2401
[dll] load: searching backend `ricoh' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-ricoh.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-ricoh.so.1'
[dll] init: initializing backend `ricoh'
[dll] init: backend `ricoh' is version 1.0.0
[dll] load: searching backend `qcam' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-qcam.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-qcam.so.1'
[dll] init: initializing backend `qcam'
[dll] init: backend `qcam' is version 1.0.0
[dll] load: searching backend `plustek' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-plustek.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-plustek.so.1'
[dll] init: initializing backend `plustek'
[dll] init: backend `plustek' is version 1.0.0
[dll] load: searching backend `pixma' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-pixma.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-pixma.so.1'
[dll] init: initializing backend `pixma'
[dll] init: backend `pixma' is version 1.0.17
[dll] load: searching backend `pint' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-pint.so.1'
[dll] load: couldn't open `/usr/lib/i386-linux-gnu/sane/libsane-pint.so.1' (No such file or directory)
[dll] load: couldn't find backend `pint' (No such file or directory)
[dll] load: searching backend `pie' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-pie.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-pie.so.1'
[dll] init: initializing backend `pie'
[dll] init: backend `pie' is version 1.0.9
[dll] load: searching backend `niash' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-niash.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-niash.so.1'
[dll] init: initializing backend `niash'
[dll] init: backend `niash' is version 1.0.1
[dll] load: searching backend `nec' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-nec.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-nec.so.1'
[dll] init: initializing backend `nec'
[dll] init: backend `nec' is version 1.0.0
[dll] load: searching backend `mustek_usb2' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-mustek_usb2.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-mustek_usb2.so.1'
[dll] init: initializing backend `mustek_usb2'
[dll] init: backend `mustek_usb2' is version 1.0.10
[dll] load: searching backend `mustek_usb' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-mustek_usb.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-mustek_usb.so.1'
[dll] init: initializing backend `mustek_usb'
[dll] init: backend `mustek_usb' is version 1.0.18
[dll] load: searching backend `mustek' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-mustek.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-mustek.so.1'
[dll] init: initializing backend `mustek'
[dll] init: backend `mustek' is version 1.0.138
[dll] load: searching backend `microtek2' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-microtek2.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-microtek2.so.1'
[dll] init: initializing backend `microtek2'
[dll] init: backend `microtek2' is version 1.0.0
[dll] load: searching backend `microtek' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-microtek.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-microtek.so.1'
[dll] init: initializing backend `microtek'
[dll] init: backend `microtek' is version 1.0.0
[dll] load: searching backend `matsushita' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-matsushita.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-matsushita.so.1'
[dll] init: initializing backend `matsushita'
[dll] init: backend `matsushita' is version 1.0.7
[dll] load: searching backend `magicolor' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-magicolor.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-magicolor.so.1'
[dll] init: initializing backend `magicolor'
[dll] init: backend `magicolor' is version 1.0.1
[dll] load: searching backend `ma1509' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-ma1509.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-ma1509.so.1'
[dll] init: initializing backend `ma1509'
[dll] init: backend `ma1509' is version 1.0.3
[dll] load: searching backend `lexmark' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-lexmark.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-lexmark.so.1'
[dll] init: initializing backend `lexmark'
[dll] init: backend `lexmark' is version 1.0.32
[dll] load: searching backend `leo' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-leo.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-leo.so.1'
[dll] init: initializing backend `leo'
[dll] init: backend `leo' is version 1.0.11
[dll] load: searching backend `kvs20xx' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-kvs20xx.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-kvs20xx.so.1'
[dll] init: initializing backend `kvs20xx'
[dll] init: backend `kvs20xx' is version 1.0.2
[dll] load: searching backend `kvs1025' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-kvs1025.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-kvs1025.so.1'
[dll] init: initializing backend `kvs1025'
[dll] init: backend `kvs1025' is version 1.0.5
[dll] load: searching backend `kodakaio' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-kodakaio.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-kodakaio.so.1'
[dll] init: initializing backend `kodakaio'
[dll] init: backend `kodakaio' is version 1.0.3
[dll] load: searching backend `kodak' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-kodak.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-kodak.so.1'
[dll] init: initializing backend `kodak'
[dll] init: backend `kodak' is version 1.0.7
[dll] load: searching backend `ibm' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-ibm.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-ibm.so.1'
[dll] init: initializing backend `ibm'
[dll] init: backend `ibm' is version 1.0.0
[dll] load: searching backend `hs2p' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-hs2p.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-hs2p.so.1'
[dll] init: initializing backend `hs2p'
[dll] init: backend `hs2p' is version 1.0.0
[dll] load: searching backend `hpljm1005' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-hpljm1005.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-hpljm1005.so.1'
[dll] init: initializing backend `hpljm1005'
[dll] init: backend `hpljm1005' is version 1.0.1
[dll] load: searching backend `hp5590' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-hp5590.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-hp5590.so.1'
[dll] init: initializing backend `hp5590'
[dll] init: backend `hp5590' is version 1.0.7
[dll] load: searching backend `hp5400' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-hp5400.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-hp5400.so.1'
[dll] init: initializing backend `hp5400'
[dll] init: backend `hp5400' is version 1.0.3
[dll] load: searching backend `hp4200' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-hp4200.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-hp4200.so.1'
[dll] init: initializing backend `hp4200'
[dll] init: backend `hp4200' is version 1.0.0
[dll] load: searching backend `hp3500' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-hp3500.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-hp3500.so.1'
[dll] init: initializing backend `hp3500'
[dll] init: backend `hp3500' is version 1.0.0
[dll] load: searching backend `hpsj5s' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-hpsj5s.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-hpsj5s.so.1'
[dll] init: initializing backend `hpsj5s'
[dll] init: backend `hpsj5s' is version 1.0.3
[dll] load: searching backend `hp3900' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-hp3900.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-hp3900.so.1'
[dll] init: initializing backend `hp3900'
[dll] init: backend `hp3900' is version 1.0.0
[dll] load: searching backend `hp' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-hp.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-hp.so.1'
[dll] init: initializing backend `hp'
[dll] init: backend `hp' is version 1.0.8
[dll] load: searching backend `gt68xx' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-gt68xx.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-gt68xx.so.1'
[dll] init: initializing backend `gt68xx'
[dll] init: backend `gt68xx' is version 1.0.84
[dll] load: searching backend `genesys' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-genesys.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-genesys.so.1'
[dll] init: initializing backend `genesys'
[dll] init: backend `genesys' is version 1.0.2511
[dll] load: searching backend `fujitsu' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-fujitsu.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-fujitsu.so.1'
[dll] init: initializing backend `fujitsu'
[dll] init: backend `fujitsu' is version 1.0.133
[dll] load: searching backend `epsonds' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-epsonds.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-epsonds.so.1'
[dll] init: initializing backend `epsonds'
[dll] init: backend `epsonds' is version 1.0.0
[dll] load: searching backend `epson' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-epson.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-epson.so.1'
[dll] init: initializing backend `epson'
[dll] init: backend `epson' is version 1.0.247
[dll] load: searching backend `epkowa' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-epkowa.so.1'
[dll] load: couldn't open `/usr/lib/i386-linux-gnu/sane/libsane-epkowa.so.1' (No such file or directory)
[dll] load: couldn't find backend `epkowa' (No such file or directory)
[dll] load: searching backend `epjitsu' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-epjitsu.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-epjitsu.so.1'
[dll] init: initializing backend `epjitsu'
[dll] init: backend `epjitsu' is version 1.0.31
[dll] load: searching backend `dmc' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-dmc.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-dmc.so.1'
[dll] init: initializing backend `dmc'
[dll] init: backend `dmc' is version 1.0.0
[dll] load: searching backend `dell1600n_net' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-dell1600n_net.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-dell1600n_net.so.1'
[dll] init: initializing backend `dell1600n_net'
[dll] init: backend `dell1600n_net' is version 1.0.0
[dll] load: searching backend `coolscan3' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-coolscan3.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-coolscan3.so.1'
[dll] init: initializing backend `coolscan3'
[dll] init: backend `coolscan3' is version 1.0.0
[dll] load: searching backend `coolscan' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-coolscan.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-coolscan.so.1'
[dll] init: initializing backend `coolscan'
[dll] init: backend `coolscan' is version 1.0.0
[dll] load: searching backend `cardscan' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-cardscan.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-cardscan.so.1'
[dll] init: initializing backend `cardscan'
[dll] init: backend `cardscan' is version 1.0.3
[dll] load: searching backend `canon_dr' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-canon_dr.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-canon_dr.so.1'
[dll] init: initializing backend `canon_dr'
[dll] init: backend `canon_dr' is version 1.0.56
[dll] load: searching backend `canon630u' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-canon630u.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-canon630u.so.1'
[dll] init: initializing backend `canon630u'
[dll] init: backend `canon630u' is version 1.0.1
[dll] load: searching backend `canon' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-canon.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-canon.so.1'
[dll] init: initializing backend `canon'
[dll] init: backend `canon' is version 1.0.0
[dll] load: searching backend `bh' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-bh.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-bh.so.1'
[dll] init: initializing backend `bh'
[dll] init: backend `bh' is version 1.0.4
[dll] load: searching backend `as6e' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-as6e.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-as6e.so.1'
[dll] init: initializing backend `as6e'
[dll] load: searching backend `artec_eplus48u' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-artec_eplus48u.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-artec_eplus48u.so.1'
[dll] init: initializing backend `artec_eplus48u'
[dll] init: backend `artec_eplus48u' is version 1.0.0
[dll] load: searching backend `artec' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-artec.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-artec.so.1'
[dll] init: initializing backend `artec'
[dll] init: backend `artec' is version 1.0.0
[dll] load: searching backend `avision' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-avision.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-avision.so.1'
[dll] init: initializing backend `avision'
[dll] init: backend `avision' is version 1.0.297
[dll] load: searching backend `apple' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-apple.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-apple.so.1'
[dll] init: initializing backend `apple'
[dll] init: backend `apple' is version 1.0.0
[dll] load: searching backend `agfafocus' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-agfafocus.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-agfafocus.so.1'
[dll] init: initializing backend `agfafocus'
[dll] init: backend `agfafocus' is version 1.0.0
[dll] load: searching backend `abaton' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-abaton.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-abaton.so.1'
[dll] init: initializing backend `abaton'
[dll] init: backend `abaton' is version 1.0.0
[dll] load: searching backend `net' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-net.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-net.so.1'
[dll] init: initializing backend `net'
[dll] init: backend `net' is version 1.0.27
[dll] load: searching backend `ls5000' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-ls5000.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-ls5000.so.1'
[dll] init: initializing backend `ls5000'
[dll] init: backend `ls5000' is version 1.0.0
[dll] load: searching backend `hpaio' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-hpaio.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-hpaio.so.1'
[dll] init: initializing backend `hpaio'
[dll] init: backend `hpaio' is version 1.0.0
[dll] sane_get_devices: found 0 devices
scanimage: no SANE devices found
[dll] sane_exit: exiting
[dll] sane_exit: calling backend `xerox_mfp's exit function
[dll] sane_exit: calling backend `umax1220u's exit function
[dll] sane_exit: calling backend `umax's exit function
[dll] sane_exit: calling backend `u12's exit function
[dll] sane_exit: calling backend `teco3's exit function
[dll] sane_exit: calling backend `teco2's exit function
[dll] sane_exit: calling backend `teco1's exit function
[dll] sane_exit: calling backend `tamarack's exit function
[dll] sane_exit: calling backend `sp15c's exit function
[dll] sane_exit: calling backend `snapscan's exit function
[dll] sane_exit: calling backend `sm3840's exit function
[dll] sane_exit: calling backend `sm3600's exit function
[dll] sane_exit: calling backend `sharp's exit function
[dll] sane_exit: calling backend `sceptre's exit function
[dll] sane_exit: calling backend `s9036's exit function
[dll] sane_exit: calling backend `rts8891's exit function
[dll] sane_exit: calling backend `ricoh's exit function
[dll] sane_exit: calling backend `qcam's exit function
[dll] sane_exit: calling backend `plustek's exit function
[dll] sane_exit: calling backend `pixma's exit function
[dll] sane_exit: calling backend `pie's exit function
[dll] sane_exit: calling backend `niash's exit function
[dll] sane_exit: calling backend `nec's exit function
[dll] sane_exit: calling backend `mustek_usb2's exit function
[dll] sane_exit: calling backend `mustek_usb's exit function
[dll] sane_exit: calling backend `mustek's exit function
[dll] sane_exit: calling backend `microtek2's exit function
[dll] sane_exit: calling backend `microtek's exit function
[dll] sane_exit: calling backend `matsushita's exit function
[dll] sane_exit: calling backend `magicolor's exit function
[dll] sane_exit: calling backend `ma1509's exit function
[dll] sane_exit: calling backend `lexmark's exit function
[dll] sane_exit: calling backend `leo's exit function
[dll] sane_exit: calling backend `kvs20xx's exit function
[dll] sane_exit: calling backend `kvs1025's exit function
[dll] sane_exit: calling backend `kodakaio's exit function
[dll] sane_exit: calling backend `kodak's exit function
[dll] sane_exit: calling backend `ibm's exit function
[dll] sane_exit: calling backend `hs2p's exit function
[dll] sane_exit: calling backend `hpljm1005's exit function
[dll] sane_exit: calling backend `hp5590's exit function
[dll] sane_exit: calling backend `hp5400's exit function
[dll] sane_exit: calling backend `hp4200's exit function
[dll] sane_exit: calling backend `hp3500's exit function
[dll] sane_exit: calling backend `hpsj5s's exit function
[dll] sane_exit: calling backend `hp3900's exit function
[dll] sane_exit: calling backend `hp's exit function
[dll] sane_exit: calling backend `gt68xx's exit function
[dll] sane_exit: calling backend `genesys's exit function
[dll] sane_exit: calling backend `fujitsu's exit function
[dll] sane_exit: calling backend `epsonds's exit function
[dll] sane_exit: calling backend `epson's exit function
[dll] sane_exit: calling backend `epjitsu's exit function
[dll] sane_exit: calling backend `dmc's exit function
[dll] sane_exit: calling backend `dell1600n_net's exit function
[dll] sane_exit: calling backend `coolscan3's exit function
[dll] sane_exit: calling backend `coolscan's exit function
[dll] sane_exit: calling backend `cardscan's exit function
[dll] sane_exit: calling backend `canon_dr's exit function
[dll] sane_exit: calling backend `canon630u's exit function
[dll] sane_exit: calling backend `canon's exit function
[dll] sane_exit: calling backend `bh's exit function
[dll] sane_exit: calling backend `artec_eplus48u's exit function
[dll] sane_exit: calling backend `artec's exit function
[dll] sane_exit: calling backend `avision's exit function
[dll] sane_exit: calling backend `apple's exit function
[dll] sane_exit: calling backend `agfafocus's exit function
[dll] sane_exit: calling backend `abaton's exit function
[dll] sane_exit: calling backend `net's exit function
[dll] sane_exit: calling backend `ls5000's exit function
[dll] sane_exit: calling backend `hpaio's exit function
[dll] sane_exit: finished
leonardo@leonardo-System-Product-Name:~$
leoleonardo
Prode Principiante
 
Messaggi: 62
Iscrizione: ottobre 2017
Distribuzione: Ubuntu 16.04.3 LTS
Sesso: Maschile

Re: avanzamento 18.04 - problema epson perfection v300 photo

Messaggioda leoleonardo » venerdì 28 settembre 2018, 15:19

Individuato qualcosa?
leoleonardo Immagine ha scritto:Eccoli
Codice: Seleziona tutto
leonardo@leonardo-System-Product-Name:~$ export SANE_DEBUG_DLL=255
leonardo@leonardo-System-Product-Name:~$ scanimage --test
[sanei_debug] Setting debug level of dll to 255.
[dll] sane_init: SANE dll backend version 1.0.13 from sane-backends 1.0.27
[dll] sane_init/read_dlld: attempting to open directory `./dll.d'
[dll] sane_init/read_dlld: attempting to open directory `/etc/sane.d/dll.d'
[dll] sane_init/read_dlld: using config directory `/etc/sane.d/dll.d'
[dll] sane_init/read_dlld: considering /etc/sane.d/dll.d/hplip
[dll] sane_init/read_config: reading dll.d/hplip
[dll] add_backend: adding backend `hpaio'
[dll] sane_init/read_dlld: considering /etc/sane.d/dll.d/libsane-extras
[dll] sane_init/read_config: reading dll.d/libsane-extras
[dll] add_backend: adding backend `ls5000'
[dll] sane_init/read_dlld: considering /etc/sane.d/dll.d/iscan
[dll] sane_init/read_config: reading dll.d/iscan
[dll] add_backend: adding backend `epkowa'
[dll] sane_init/read_dlld: done.
[dll] sane_init/read_config: reading dll.conf
[dll] add_backend: adding backend `net'
[dll] add_backend: adding backend `abaton'
[dll] add_backend: adding backend `agfafocus'
[dll] add_backend: adding backend `apple'
[dll] add_backend: adding backend `avision'
[dll] add_backend: adding backend `artec'
[dll] add_backend: adding backend `artec_eplus48u'
[dll] add_backend: adding backend `as6e'
[dll] add_backend: adding backend `bh'
[dll] add_backend: adding backend `canon'
[dll] add_backend: adding backend `canon630u'
[dll] add_backend: adding backend `canon_dr'
[dll] add_backend: adding backend `cardscan'
[dll] add_backend: adding backend `coolscan'
[dll] add_backend: adding backend `coolscan3'
[dll] add_backend: adding backend `dell1600n_net'
[dll] add_backend: adding backend `dmc'
[dll] add_backend: adding backend `epjitsu'
[dll] add_backend: adding backend `epkowa'
[dll] add_backend: `epkowa' is already there
[dll] add_backend: adding backend `epson'
[dll] add_backend: adding backend `epsonds'
[dll] add_backend: adding backend `fujitsu'
[dll] add_backend: adding backend `genesys'
[dll] add_backend: adding backend `gt68xx'
[dll] add_backend: adding backend `hp'
[dll] add_backend: adding backend `hp3900'
[dll] add_backend: adding backend `hpsj5s'
[dll] add_backend: adding backend `hp3500'
[dll] add_backend: adding backend `hp4200'
[dll] add_backend: adding backend `hp5400'
[dll] add_backend: adding backend `hp5590'
[dll] add_backend: adding backend `hpljm1005'
[dll] add_backend: adding backend `hs2p'
[dll] add_backend: adding backend `ibm'
[dll] add_backend: adding backend `kodak'
[dll] add_backend: adding backend `kodakaio'
[dll] add_backend: adding backend `kvs1025'
[dll] add_backend: adding backend `kvs20xx'
[dll] add_backend: adding backend `leo'
[dll] add_backend: adding backend `lexmark'
[dll] add_backend: adding backend `ma1509'
[dll] add_backend: adding backend `magicolor'
[dll] add_backend: adding backend `matsushita'
[dll] add_backend: adding backend `microtek'
[dll] add_backend: adding backend `microtek2'
[dll] add_backend: adding backend `mustek'
[dll] add_backend: adding backend `mustek_usb'
[dll] add_backend: adding backend `mustek_usb2'
[dll] add_backend: adding backend `nec'
[dll] add_backend: adding backend `niash'
[dll] add_backend: adding backend `pie'
[dll] add_backend: adding backend `pint'
[dll] add_backend: adding backend `pixma'
[dll] add_backend: adding backend `plustek'
[dll] add_backend: adding backend `qcam'
[dll] add_backend: adding backend `ricoh'
[dll] add_backend: adding backend `rts8891'
[dll] add_backend: adding backend `s9036'
[dll] add_backend: adding backend `sceptre'
[dll] add_backend: adding backend `sharp'
[dll] add_backend: adding backend `sm3600'
[dll] add_backend: adding backend `sm3840'
[dll] add_backend: adding backend `snapscan'
[dll] add_backend: adding backend `sp15c'
[dll] add_backend: adding backend `tamarack'
[dll] add_backend: adding backend `teco1'
[dll] add_backend: adding backend `teco2'
[dll] add_backend: adding backend `teco3'
[dll] add_backend: adding backend `u12'
[dll] add_backend: adding backend `umax'
[dll] add_backend: adding backend `umax1220u'
[dll] add_backend: adding backend `v4l'
[dll] add_backend: adding backend `xerox_mfp'
[dll] sane_get_devices
[dll] load: searching backend `xerox_mfp' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-xerox_mfp.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-xerox_mfp.so.1'
[dll] init: initializing backend `xerox_mfp'
[dll] init: backend `xerox_mfp' is version 1.0.13
[dll] load: searching backend `v4l' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-v4l.so.1'
[dll] load: couldn't open `/usr/lib/i386-linux-gnu/sane/libsane-v4l.so.1' (No such file or directory)
[dll] load: couldn't find backend `v4l' (No such file or directory)
[dll] load: searching backend `umax1220u' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-umax1220u.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-umax1220u.so.1'
[dll] init: initializing backend `umax1220u'
[dll] init: backend `umax1220u' is version 1.0.2
[dll] load: searching backend `umax' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-umax.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-umax.so.1'
[dll] init: initializing backend `umax'
[dll] init: backend `umax' is version 1.0.45
[dll] load: searching backend `u12' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-u12.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-u12.so.1'
[dll] init: initializing backend `u12'
[dll] init: backend `u12' is version 1.0.0
[dll] load: searching backend `teco3' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-teco3.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-teco3.so.1'
[dll] init: initializing backend `teco3'
[dll] init: backend `teco3' is version 1.0.1
[dll] load: searching backend `teco2' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-teco2.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-teco2.so.1'
[dll] init: initializing backend `teco2'
[dll] init: backend `teco2' is version 1.0.10
[dll] load: searching backend `teco1' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-teco1.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-teco1.so.1'
[dll] init: initializing backend `teco1'
[dll] init: backend `teco1' is version 1.0.10
[dll] load: searching backend `tamarack' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-tamarack.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-tamarack.so.1'
[dll] init: initializing backend `tamarack'
[dll] init: backend `tamarack' is version 1.0.0
[dll] load: searching backend `sp15c' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-sp15c.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-sp15c.so.1'
[dll] init: initializing backend `sp15c'
[dll] init: backend `sp15c' is version 1.0.0
[dll] load: searching backend `snapscan' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-snapscan.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-snapscan.so.1'
[dll] init: initializing backend `snapscan'
[dll] init: backend `snapscan' is version 1.4.53
[dll] load: searching backend `sm3840' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-sm3840.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-sm3840.so.1'
[dll] init: initializing backend `sm3840'
[dll] init: backend `sm3840' is version 1.0.0
[dll] load: searching backend `sm3600' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-sm3600.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-sm3600.so.1'
[dll] init: initializing backend `sm3600'
[dll] init: backend `sm3600' is version 1.0.6
[dll] load: searching backend `sharp' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-sharp.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-sharp.so.1'
[dll] init: initializing backend `sharp'
[dll] init: backend `sharp' is version 1.0.0
[dll] load: searching backend `sceptre' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-sceptre.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-sceptre.so.1'
[dll] init: initializing backend `sceptre'
[dll] init: backend `sceptre' is version 1.0.10
[dll] load: searching backend `s9036' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-s9036.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-s9036.so.1'
[dll] init: initializing backend `s9036'
[dll] init: backend `s9036' is version 1.0.0
[dll] load: searching backend `rts8891' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-rts8891.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-rts8891.so.1'
[dll] init: initializing backend `rts8891'
[dll] init: backend `rts8891' is version 1.0.2401
[dll] load: searching backend `ricoh' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-ricoh.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-ricoh.so.1'
[dll] init: initializing backend `ricoh'
[dll] init: backend `ricoh' is version 1.0.0
[dll] load: searching backend `qcam' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-qcam.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-qcam.so.1'
[dll] init: initializing backend `qcam'
[dll] init: backend `qcam' is version 1.0.0
[dll] load: searching backend `plustek' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-plustek.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-plustek.so.1'
[dll] init: initializing backend `plustek'
[dll] init: backend `plustek' is version 1.0.0
[dll] load: searching backend `pixma' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-pixma.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-pixma.so.1'
[dll] init: initializing backend `pixma'
[dll] init: backend `pixma' is version 1.0.17
[dll] load: searching backend `pint' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-pint.so.1'
[dll] load: couldn't open `/usr/lib/i386-linux-gnu/sane/libsane-pint.so.1' (No such file or directory)
[dll] load: couldn't find backend `pint' (No such file or directory)
[dll] load: searching backend `pie' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-pie.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-pie.so.1'
[dll] init: initializing backend `pie'
[dll] init: backend `pie' is version 1.0.9
[dll] load: searching backend `niash' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-niash.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-niash.so.1'
[dll] init: initializing backend `niash'
[dll] init: backend `niash' is version 1.0.1
[dll] load: searching backend `nec' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-nec.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-nec.so.1'
[dll] init: initializing backend `nec'
[dll] init: backend `nec' is version 1.0.0
[dll] load: searching backend `mustek_usb2' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-mustek_usb2.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-mustek_usb2.so.1'
[dll] init: initializing backend `mustek_usb2'
[dll] init: backend `mustek_usb2' is version 1.0.10
[dll] load: searching backend `mustek_usb' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-mustek_usb.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-mustek_usb.so.1'
[dll] init: initializing backend `mustek_usb'
[dll] init: backend `mustek_usb' is version 1.0.18
[dll] load: searching backend `mustek' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-mustek.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-mustek.so.1'
[dll] init: initializing backend `mustek'
[dll] init: backend `mustek' is version 1.0.138
[dll] load: searching backend `microtek2' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-microtek2.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-microtek2.so.1'
[dll] init: initializing backend `microtek2'
[dll] init: backend `microtek2' is version 1.0.0
[dll] load: searching backend `microtek' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-microtek.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-microtek.so.1'
[dll] init: initializing backend `microtek'
[dll] init: backend `microtek' is version 1.0.0
[dll] load: searching backend `matsushita' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-matsushita.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-matsushita.so.1'
[dll] init: initializing backend `matsushita'
[dll] init: backend `matsushita' is version 1.0.7
[dll] load: searching backend `magicolor' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-magicolor.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-magicolor.so.1'
[dll] init: initializing backend `magicolor'
[dll] init: backend `magicolor' is version 1.0.1
[dll] load: searching backend `ma1509' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-ma1509.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-ma1509.so.1'
[dll] init: initializing backend `ma1509'
[dll] init: backend `ma1509' is version 1.0.3
[dll] load: searching backend `lexmark' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-lexmark.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-lexmark.so.1'
[dll] init: initializing backend `lexmark'
[dll] init: backend `lexmark' is version 1.0.32
[dll] load: searching backend `leo' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-leo.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-leo.so.1'
[dll] init: initializing backend `leo'
[dll] init: backend `leo' is version 1.0.11
[dll] load: searching backend `kvs20xx' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-kvs20xx.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-kvs20xx.so.1'
[dll] init: initializing backend `kvs20xx'
[dll] init: backend `kvs20xx' is version 1.0.2
[dll] load: searching backend `kvs1025' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-kvs1025.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-kvs1025.so.1'
[dll] init: initializing backend `kvs1025'
[dll] init: backend `kvs1025' is version 1.0.5
[dll] load: searching backend `kodakaio' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-kodakaio.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-kodakaio.so.1'
[dll] init: initializing backend `kodakaio'
[dll] init: backend `kodakaio' is version 1.0.3
[dll] load: searching backend `kodak' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-kodak.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-kodak.so.1'
[dll] init: initializing backend `kodak'
[dll] init: backend `kodak' is version 1.0.7
[dll] load: searching backend `ibm' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-ibm.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-ibm.so.1'
[dll] init: initializing backend `ibm'
[dll] init: backend `ibm' is version 1.0.0
[dll] load: searching backend `hs2p' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-hs2p.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-hs2p.so.1'
[dll] init: initializing backend `hs2p'
[dll] init: backend `hs2p' is version 1.0.0
[dll] load: searching backend `hpljm1005' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-hpljm1005.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-hpljm1005.so.1'
[dll] init: initializing backend `hpljm1005'
[dll] init: backend `hpljm1005' is version 1.0.1
[dll] load: searching backend `hp5590' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-hp5590.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-hp5590.so.1'
[dll] init: initializing backend `hp5590'
[dll] init: backend `hp5590' is version 1.0.7
[dll] load: searching backend `hp5400' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-hp5400.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-hp5400.so.1'
[dll] init: initializing backend `hp5400'
[dll] init: backend `hp5400' is version 1.0.3
[dll] load: searching backend `hp4200' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-hp4200.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-hp4200.so.1'
[dll] init: initializing backend `hp4200'
[dll] init: backend `hp4200' is version 1.0.0
[dll] load: searching backend `hp3500' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-hp3500.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-hp3500.so.1'
[dll] init: initializing backend `hp3500'
[dll] init: backend `hp3500' is version 1.0.0
[dll] load: searching backend `hpsj5s' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-hpsj5s.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-hpsj5s.so.1'
[dll] init: initializing backend `hpsj5s'
[dll] init: backend `hpsj5s' is version 1.0.3
[dll] load: searching backend `hp3900' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-hp3900.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-hp3900.so.1'
[dll] init: initializing backend `hp3900'
[dll] init: backend `hp3900' is version 1.0.0
[dll] load: searching backend `hp' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-hp.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-hp.so.1'
[dll] init: initializing backend `hp'
[dll] init: backend `hp' is version 1.0.8
[dll] load: searching backend `gt68xx' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-gt68xx.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-gt68xx.so.1'
[dll] init: initializing backend `gt68xx'
[dll] init: backend `gt68xx' is version 1.0.84
[dll] load: searching backend `genesys' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-genesys.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-genesys.so.1'
[dll] init: initializing backend `genesys'
[dll] init: backend `genesys' is version 1.0.2511
[dll] load: searching backend `fujitsu' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-fujitsu.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-fujitsu.so.1'
[dll] init: initializing backend `fujitsu'
[dll] init: backend `fujitsu' is version 1.0.133
[dll] load: searching backend `epsonds' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-epsonds.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-epsonds.so.1'
[dll] init: initializing backend `epsonds'
[dll] init: backend `epsonds' is version 1.0.0
[dll] load: searching backend `epson' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-epson.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-epson.so.1'
[dll] init: initializing backend `epson'
[dll] init: backend `epson' is version 1.0.247
[dll] load: searching backend `epkowa' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-epkowa.so.1'
[dll] load: couldn't open `/usr/lib/i386-linux-gnu/sane/libsane-epkowa.so.1' (No such file or directory)
[dll] load: couldn't find backend `epkowa' (No such file or directory)
[dll] load: searching backend `epjitsu' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-epjitsu.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-epjitsu.so.1'
[dll] init: initializing backend `epjitsu'
[dll] init: backend `epjitsu' is version 1.0.31
[dll] load: searching backend `dmc' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-dmc.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-dmc.so.1'
[dll] init: initializing backend `dmc'
[dll] init: backend `dmc' is version 1.0.0
[dll] load: searching backend `dell1600n_net' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-dell1600n_net.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-dell1600n_net.so.1'
[dll] init: initializing backend `dell1600n_net'
[dll] init: backend `dell1600n_net' is version 1.0.0
[dll] load: searching backend `coolscan3' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-coolscan3.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-coolscan3.so.1'
[dll] init: initializing backend `coolscan3'
[dll] init: backend `coolscan3' is version 1.0.0
[dll] load: searching backend `coolscan' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-coolscan.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-coolscan.so.1'
[dll] init: initializing backend `coolscan'
[dll] init: backend `coolscan' is version 1.0.0
[dll] load: searching backend `cardscan' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-cardscan.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-cardscan.so.1'
[dll] init: initializing backend `cardscan'
[dll] init: backend `cardscan' is version 1.0.3
[dll] load: searching backend `canon_dr' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-canon_dr.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-canon_dr.so.1'
[dll] init: initializing backend `canon_dr'
[dll] init: backend `canon_dr' is version 1.0.56
[dll] load: searching backend `canon630u' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-canon630u.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-canon630u.so.1'
[dll] init: initializing backend `canon630u'
[dll] init: backend `canon630u' is version 1.0.1
[dll] load: searching backend `canon' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-canon.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-canon.so.1'
[dll] init: initializing backend `canon'
[dll] init: backend `canon' is version 1.0.0
[dll] load: searching backend `bh' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-bh.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-bh.so.1'
[dll] init: initializing backend `bh'
[dll] init: backend `bh' is version 1.0.4
[dll] load: searching backend `as6e' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-as6e.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-as6e.so.1'
[dll] init: initializing backend `as6e'
[dll] load: searching backend `artec_eplus48u' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-artec_eplus48u.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-artec_eplus48u.so.1'
[dll] init: initializing backend `artec_eplus48u'
[dll] init: backend `artec_eplus48u' is version 1.0.0
[dll] load: searching backend `artec' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-artec.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-artec.so.1'
[dll] init: initializing backend `artec'
[dll] init: backend `artec' is version 1.0.0
[dll] load: searching backend `avision' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-avision.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-avision.so.1'
[dll] init: initializing backend `avision'
[dll] init: backend `avision' is version 1.0.297
[dll] load: searching backend `apple' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-apple.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-apple.so.1'
[dll] init: initializing backend `apple'
[dll] init: backend `apple' is version 1.0.0
[dll] load: searching backend `agfafocus' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-agfafocus.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-agfafocus.so.1'
[dll] init: initializing backend `agfafocus'
[dll] init: backend `agfafocus' is version 1.0.0
[dll] load: searching backend `abaton' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-abaton.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-abaton.so.1'
[dll] init: initializing backend `abaton'
[dll] init: backend `abaton' is version 1.0.0
[dll] load: searching backend `net' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-net.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-net.so.1'
[dll] init: initializing backend `net'
[dll] init: backend `net' is version 1.0.27
[dll] load: searching backend `ls5000' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-ls5000.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-ls5000.so.1'
[dll] init: initializing backend `ls5000'
[dll] init: backend `ls5000' is version 1.0.0
[dll] load: searching backend `hpaio' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-hpaio.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-hpaio.so.1'
[dll] init: initializing backend `hpaio'
[dll] init: backend `hpaio' is version 1.0.0
[dll] sane_get_devices: found 0 devices
scanimage: no SANE devices found
[dll] sane_exit: exiting
[dll] sane_exit: calling backend `xerox_mfp's exit function
[dll] sane_exit: calling backend `umax1220u's exit function
[dll] sane_exit: calling backend `umax's exit function
[dll] sane_exit: calling backend `u12's exit function
[dll] sane_exit: calling backend `teco3's exit function
[dll] sane_exit: calling backend `teco2's exit function
[dll] sane_exit: calling backend `teco1's exit function
[dll] sane_exit: calling backend `tamarack's exit function
[dll] sane_exit: calling backend `sp15c's exit function
[dll] sane_exit: calling backend `snapscan's exit function
[dll] sane_exit: calling backend `sm3840's exit function
[dll] sane_exit: calling backend `sm3600's exit function
[dll] sane_exit: calling backend `sharp's exit function
[dll] sane_exit: calling backend `sceptre's exit function
[dll] sane_exit: calling backend `s9036's exit function
[dll] sane_exit: calling backend `rts8891's exit function
[dll] sane_exit: calling backend `ricoh's exit function
[dll] sane_exit: calling backend `qcam's exit function
[dll] sane_exit: calling backend `plustek's exit function
[dll] sane_exit: calling backend `pixma's exit function
[dll] sane_exit: calling backend `pie's exit function
[dll] sane_exit: calling backend `niash's exit function
[dll] sane_exit: calling backend `nec's exit function
[dll] sane_exit: calling backend `mustek_usb2's exit function
[dll] sane_exit: calling backend `mustek_usb's exit function
[dll] sane_exit: calling backend `mustek's exit function
[dll] sane_exit: calling backend `microtek2's exit function
[dll] sane_exit: calling backend `microtek's exit function
[dll] sane_exit: calling backend `matsushita's exit function
[dll] sane_exit: calling backend `magicolor's exit function
[dll] sane_exit: calling backend `ma1509's exit function
[dll] sane_exit: calling backend `lexmark's exit function
[dll] sane_exit: calling backend `leo's exit function
[dll] sane_exit: calling backend `kvs20xx's exit function
[dll] sane_exit: calling backend `kvs1025's exit function
[dll] sane_exit: calling backend `kodakaio's exit function
[dll] sane_exit: calling backend `kodak's exit function
[dll] sane_exit: calling backend `ibm's exit function
[dll] sane_exit: calling backend `hs2p's exit function
[dll] sane_exit: calling backend `hpljm1005's exit function
[dll] sane_exit: calling backend `hp5590's exit function
[dll] sane_exit: calling backend `hp5400's exit function
[dll] sane_exit: calling backend `hp4200's exit function
[dll] sane_exit: calling backend `hp3500's exit function
[dll] sane_exit: calling backend `hpsj5s's exit function
[dll] sane_exit: calling backend `hp3900's exit function
[dll] sane_exit: calling backend `hp's exit function
[dll] sane_exit: calling backend `gt68xx's exit function
[dll] sane_exit: calling backend `genesys's exit function
[dll] sane_exit: calling backend `fujitsu's exit function
[dll] sane_exit: calling backend `epsonds's exit function
[dll] sane_exit: calling backend `epson's exit function
[dll] sane_exit: calling backend `epjitsu's exit function
[dll] sane_exit: calling backend `dmc's exit function
[dll] sane_exit: calling backend `dell1600n_net's exit function
[dll] sane_exit: calling backend `coolscan3's exit function
[dll] sane_exit: calling backend `coolscan's exit function
[dll] sane_exit: calling backend `cardscan's exit function
[dll] sane_exit: calling backend `canon_dr's exit function
[dll] sane_exit: calling backend `canon630u's exit function
[dll] sane_exit: calling backend `canon's exit function
[dll] sane_exit: calling backend `bh's exit function
[dll] sane_exit: calling backend `artec_eplus48u's exit function
[dll] sane_exit: calling backend `artec's exit function
[dll] sane_exit: calling backend `avision's exit function
[dll] sane_exit: calling backend `apple's exit function
[dll] sane_exit: calling backend `agfafocus's exit function
[dll] sane_exit: calling backend `abaton's exit function
[dll] sane_exit: calling backend `net's exit function
[dll] sane_exit: calling backend `ls5000's exit function
[dll] sane_exit: calling backend `hpaio's exit function
[dll] sane_exit: finished
leonardo@leonardo-System-Product-Name:~$
leoleonardo
Prode Principiante
 
Messaggi: 62
Iscrizione: ottobre 2017
Distribuzione: Ubuntu 16.04.3 LTS
Sesso: Maschile

Re: avanzamento 18.04 - problema epson perfection v300 photo

Messaggioda magozurlinux » venerdì 28 settembre 2018, 17:23

Dal debug ho trovato questo:

Codice: Seleziona tutto
[dll] load: searching backend `epkowa' in `/usr/lib/i386-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-epkowa.so.1'
[dll] load: couldn't open `/usr/lib/i386-linux-gnu/sane/libsane-epkowa.so.1' (No such file or directory)
[dll] load: couldn't find backend `epkowa' (No such file or directory)


Da terminale postami questo comando:

Codice: Seleziona tutto
locate libsane-epkowa.so.1
Xubuntu 18.04 LTS amd64 :ciao:
Avatar utente
magozurlinux
Accecante Asceta
Accecante Asceta
 
Messaggi: 21441
Iscrizione: marzo 2010
Località: Pisa
Desktop: Desktop XfCE
Distribuzione: Xubuntu 18.04 LTS x86_64

Re: avanzamento 18.04 - problema epson perfection v300 photo

Messaggioda leoleonardo » sabato 29 settembre 2018, 6:52

Ecco
Codice: Seleziona tutto
~$ locate libsane-epkowa.so.1
/usr/lib/sane/libsane-epkowa.so.1
/usr/lib/sane/libsane-epkowa.so.1.0.15

leoleonardo
Prode Principiante
 
Messaggi: 62
Iscrizione: ottobre 2017
Distribuzione: Ubuntu 16.04.3 LTS
Sesso: Maschile

Re: avanzamento 18.04 - problema epson perfection v300 photo

Messaggioda magozurlinux » sabato 29 settembre 2018, 11:09

Prova con questi comandi:

Codice: Seleziona tutto
sudo cp /usr/lib/sane/libsane-epkowa.so.1 /usr/lib/i386-linux-gnu/sane


Codice: Seleziona tutto
sudo cp /usr/lib/sane/libsane-epkowa.so.1.0.15 /usr/lib/i386-linux-gnu/sane


riavvia il pc.

Prova lo scanner.
Xubuntu 18.04 LTS amd64 :ciao:
Avatar utente
magozurlinux
Accecante Asceta
Accecante Asceta
 
Messaggi: 21441
Iscrizione: marzo 2010
Località: Pisa
Desktop: Desktop XfCE
Distribuzione: Xubuntu 18.04 LTS x86_64

Re: avanzamento 18.04 - problema epson perfection v300 photo

Messaggioda leoleonardo » sabato 29 settembre 2018, 12:15

Sembra che qualcosa stia cambiando, ti posto le schermate che sono apparse subito dopo aver cliccato sull'icona simple-scan e sui successivi pulsanti delle schermate apparse:
Immagine

dopo aver cliccato su acquisisci è apparso
Immagine

dopo aver chiuso la notifica ho ripetuto acquisisci ed è apparsa la schermata che indicava il caricamento
Immagine

ma purtroppo dopo un periodo di loop si è chiuso tutto
leoleonardo
Prode Principiante
 
Messaggi: 62
Iscrizione: ottobre 2017
Distribuzione: Ubuntu 16.04.3 LTS
Sesso: Maschile

Re: avanzamento 18.04 - problema epson perfection v300 photo

Messaggioda magozurlinux » sabato 29 settembre 2018, 16:56

Prova con iscan e xsane.
Xubuntu 18.04 LTS amd64 :ciao:
Avatar utente
magozurlinux
Accecante Asceta
Accecante Asceta
 
Messaggi: 21441
Iscrizione: marzo 2010
Località: Pisa
Desktop: Desktop XfCE
Distribuzione: Xubuntu 18.04 LTS x86_64

Re: avanzamento 18.04 - problema epson perfection v300 photo

Messaggioda leoleonardo » domenica 30 settembre 2018, 6:03

Ok. questo è il risultato di iscan
Immagine
ho effettuato la scelta
Immagine
è partita la scansione
Immagine
ho cliccato acquisisci
Immagine
Finalmente "tanto tuonò ...che piovve" :D
Immagine

Con xsane è successa la stessa cosa, quindi ok.

Mentre, ripetendo l'operazione con simple-scan, non mi dà la possibilità di selezionare il tipo di scanner e quindi non va.

Ti chiedo se c'è da fare qualcos'altro, visto che nello Scan Selector Dialog si presentano due opzioni e cioè:
Epson (unknow model) [epkowa:002:004]
Epson Perfection V300 [epkowa·interpretor:002:004]
leoleonardo
Prode Principiante
 
Messaggi: 62
Iscrizione: ottobre 2017
Distribuzione: Ubuntu 16.04.3 LTS
Sesso: Maschile

Re: avanzamento 18.04 - problema epson perfection v300 photo

Messaggioda magozurlinux » lunedì 1 ottobre 2018, 11:41

Ho visto che lo rileva col backend epkowa:

Da terminale postami questi comandi:

Codice: Seleziona tutto
cat /etc/sane.d/dll.conf


Codice: Seleziona tutto
cat  /etc/sane.d/epkowa.conf
Xubuntu 18.04 LTS amd64 :ciao:
Avatar utente
magozurlinux
Accecante Asceta
Accecante Asceta
 
Messaggi: 21441
Iscrizione: marzo 2010
Località: Pisa
Desktop: Desktop XfCE
Distribuzione: Xubuntu 18.04 LTS x86_64

Re: avanzamento 18.04 - problema epson perfection v300 photo

Messaggioda leoleonardo » lunedì 1 ottobre 2018, 18:40

:~$ cat /etc/sane.d/dll.conf
Codice: Seleziona tutto
# dll.conf - Configuration file for the SANE dynamic backend loader
#
# Backends can also be enabled by configuration snippets under the dll.d/
# directory -- third party backends can drop their configuration file in
# this in this directory, named after the backend.
#
# The next line enables the network backend; comment it out if you don't
# need to use a remote SANE scanner over the network -- see sane-net(5)
# and saned(8) for details.
net
abaton
agfafocus
apple
avision
artec
artec_eplus48u
as6e
bh
canon
canon630u
canon_dr
#canon_pp
cardscan
coolscan
#coolscan2
coolscan3
#dc25
#dc210
#dc240
dell1600n_net
dmc
epjitsu
epkowa
   epson
   #epson2
epsonds
fujitsu
#gphoto2
genesys
gt68xx
hp
hp3900
hpsj5s
hp3500
hp4200
hp5400
hp5590
hpljm1005
hs2p
ibm
kodak
kodakaio
kvs1025
kvs20xx
leo
lexmark
ma1509
magicolor
matsushita
microtek
microtek2
mustek
#mustek_pp
mustek_usb
mustek_usb2
nec
niash
#p5
pie
pint
pixma
plustek
#plustek_pp
#pnm
qcam
ricoh
rts8891
s9036
sceptre
sharp
sm3600
sm3840
snapscan
sp15c
#st400
#stv680
tamarack
teco1
teco2
teco3
#test
u12
umax
#umax_pp
umax1220u
v4l
xerox_mfp
leonardo@leonardo-System-Product-Name:~$


:~$ cat /etc/sane.d/epkowa.conf
Codice: Seleziona tutto
# epkowa.conf -- sample configuration for the EPKOWA SANE backend
# Copyright (C) 2004, 2008, 2009  Olaf Meeuwissen
#
# See sane-epkowa(5), sane-usb(5) and sane-scsi(5) for details.

# Detect all devices supported by the backend.
# If you don't have a SCSI device, you can comment out the "scsi"
# keyword.  Similarly for the other keywords.
#
usb 0x04b8 0x0131
scsi


# For any USB scanner not known to the backend (yet), you may, at your
# own peril(!!), force the backend to recognise and use it via libusb.
# You can do so by the following configuration command:
#
#   usb <USB vendor ID> <USB product ID>
#
# SEIKO EPSON's USB vendor ID is '0x04b8' (without quotes).  In order
# to find the USB product ID, use lsusb(1).
# A sample configuration for the Epson Perfection 1650 (Epson GT-8200),
# which has a product ID of 0x0110, would look as follows:
#
#usb 0x04b8 0x0110


# For SCSI devices not detected, you can add an entry like:
#
#   scsi EPSON GT-20000
#
# where the GT-20000 bit corresponds to the SCSI model information as
# shown in the output of dmesg(1) or in the /var/log/kern.log file.


# Network attached devices may be made to work by first installing the
# (non-free) iscan-network-nt package and then adding configuration lines
# as per information below.
#
# For each network attached device, you must add an entry as follows:
#
#   net <IP-address|hostname> [port-number]
#
# Ask your network administrator for the device's IP address or check
# for yourself on the panel (if it has one).  The port-number is very
# optional and defaults to 1865.
# Note that network attached devices are not queried unless configured
# in this file.
#
# Examples:
#
#net 192.16.136.2 1865
#net 10.0.0.1
#net scanner.mydomain.com


# Some backend behaviour can be customized by using the option keyword
# followed by an option name, as shown below.
#
#   option <option-name>
#
# Currently available options:
#
# Makes the automatic document feeder the default document source
#option prefer-adf
leonardo@leonardo-System-Product-Name:~$
leoleonardo
Prode Principiante
 
Messaggi: 62
Iscrizione: ottobre 2017
Distribuzione: Ubuntu 16.04.3 LTS
Sesso: Maschile

Re: avanzamento 18.04 - problema epson perfection v300 photo

Messaggioda magozurlinux » martedì 2 ottobre 2018, 16:25

Da terminale dai questi comandi:

Codice: Seleziona tutto
sudo -H gedit /etc/sane.d/epkowa.conf


scorri il file, metti il # alla riga che hai aggiunto:


#usb 0x04b8 0x0131
scsi

scorri il file, sotto a questo:

#usb 0x04b8 0x0110

aggiungi questo senza il #:

Codice: Seleziona tutto
usb 0x04b8 0x0131


salva ed esci dall'editor di testo.

Riavvia il pc e prova lo scanner.
Xubuntu 18.04 LTS amd64 :ciao:
Avatar utente
magozurlinux
Accecante Asceta
Accecante Asceta
 
Messaggi: 21441
Iscrizione: marzo 2010
Località: Pisa
Desktop: Desktop XfCE
Distribuzione: Xubuntu 18.04 LTS x86_64

Re: avanzamento 18.04 - problema epson perfection v300 photo

Messaggioda leoleonardo » martedì 2 ottobre 2018, 18:06

Ho fatto come hai detto, ma non è cambiato nulla. Cioè con simple-scan, sia da icona che da terminale accade come nel post precedente: non va.

Mentre con iscan si presentano nello Scan Selector Dialog le due opzioni:
Epson (unknow model) [epkowa:002:004]
Epson Perfection V300 [epkowa·interpretor:002:004]
Quindi seleziono Epson Perfection V300 e va tutto bene
leoleonardo
Prode Principiante
 
Messaggi: 62
Iscrizione: ottobre 2017
Distribuzione: Ubuntu 16.04.3 LTS
Sesso: Maschile

Re: avanzamento 18.04 - problema epson perfection v300 photo

Messaggioda magozurlinux » mercoledì 3 ottobre 2018, 16:27

leoleonardo Immagine ha scritto:Ho fatto come hai detto, ma non è cambiato nulla. Cioè con simple-scan, sia da icona che da terminale accade come nel post precedente: non va.

Mentre con iscan si presentano nello Scan Selector Dialog le due opzioni:
Epson (unknow model) [epkowa:002:004]
Epson Perfection V300 [epkowa·interpretor:002:004]
Quindi seleziono Epson Perfection V300 e va tutto bene


Non so se è un bug di Ubuntu 18.04 LTS, un'altra prova che puoi fare è dare questi comandi:

Codice: Seleziona tutto
sudo -H gedit /etc/sane.d/dll.conf


scorri il file e metti il # a epson

Codice: Seleziona tutto
#epson


salva ed esci dall'editor di testo.

Riavvia e riprova lo scanner.

Vedi se facendo così risolvi il problema.

Ho esaurito le mie conoscenze sullo scanner.
Xubuntu 18.04 LTS amd64 :ciao:
Avatar utente
magozurlinux
Accecante Asceta
Accecante Asceta
 
Messaggi: 21441
Iscrizione: marzo 2010
Località: Pisa
Desktop: Desktop XfCE
Distribuzione: Xubuntu 18.04 LTS x86_64

Re: avanzamento 18.04 - problema epson perfection v300 photo

Messaggioda leoleonardo » mercoledì 3 ottobre 2018, 18:15

magozurlinux Immagine ha scritto:
leoleonardo Immagine ha scritto:Ho fatto come hai detto, ma non è cambiato nulla. Cioè con simple-scan, sia da icona che da terminale accade come nel post precedente: non va.

Mentre con iscan si presentano nello Scan Selector Dialog le due opzioni:
Epson (unknow model) [epkowa:002:004]
Epson Perfection V300 [epkowa·interpretor:002:004]
Quindi seleziono Epson Perfection V300 e va tutto bene


Non so se è un bug di Ubuntu 18.04 LTS, un'altra prova che puoi fare è dare questi comandi:

Codice: Seleziona tutto
sudo -H gedit /etc/sane.d/dll.conf


scorri il file e metti il # a epson

Codice: Seleziona tutto
#epson


salva ed esci dall'editor di testo.

Riavvia e riprova lo scanner.

Vedi se facendo così risolvi il problema.

Ho esaurito le mie conoscenze sullo scanner.


Sicuramente sarà un bug di Ubuntu 18.04 LTS, infatti ho provato, ma non è cambiato nulla. Comunque a me basta che funzioni (iscan o simple-scan è uguale).
Ti ringrazio per la tua pazienza e per il prezioso contributo alla soluzione del problema.
Non so se posso essere utile alla comunità sintetizzando i passaggi di questo lavoro, oppure basta un “risolto”.
Di nuovo grazie.
leoleonardo
Prode Principiante
 
Messaggi: 62
Iscrizione: ottobre 2017
Distribuzione: Ubuntu 16.04.3 LTS
Sesso: Maschile

Re: avanzamento 18.04 - problema epson perfection v300 photo

Messaggioda magozurlinux » giovedì 4 ottobre 2018, 11:21

Prego, di nulla!

Se lo scanner ora funziona, puoi mettere [Risolto] sul primo titolo della discussione prima di avanzamento 18.04 - problema epson perfection v300 photo
Xubuntu 18.04 LTS amd64 :ciao:
Avatar utente
magozurlinux
Accecante Asceta
Accecante Asceta
 
Messaggi: 21441
Iscrizione: marzo 2010
Località: Pisa
Desktop: Desktop XfCE
Distribuzione: Xubuntu 18.04 LTS x86_64

Re: [risolto] avanzamento 18.04 - problema epson perfection

Messaggioda leoleonardo » giovedì 4 ottobre 2018, 15:48

OK.
leoleonardo
Prode Principiante
 
Messaggi: 62
Iscrizione: ottobre 2017
Distribuzione: Ubuntu 16.04.3 LTS
Sesso: Maschile

Re: [risolto] avanzamento 18.04 - problema epson perfection

Messaggioda magozurlinux » venerdì 5 ottobre 2018, 18:15

Perfetto! :D

:birra:

Ciao :ciao:
Xubuntu 18.04 LTS amd64 :ciao:
Avatar utente
magozurlinux
Accecante Asceta
Accecante Asceta
 
Messaggi: 21441
Iscrizione: marzo 2010
Località: Pisa
Desktop: Desktop XfCE
Distribuzione: Xubuntu 18.04 LTS x86_64

Precedente

Torna a Driver e periferiche

Chi c’è in linea

Visualizzano questa sezione: 0 utenti registrati e 12 ospiti