Pagina 1 di 1
USB Bluetooth Dongle non riconosciuto
Inviato: martedì 25 dicembre 2018, 0:38
da akplm
Ciao a tutti e buon natale.
Ho acquistato un adattatore bluetooth per utilizzare alcune cuffie senza filo.
IL sistema però me lo vedo solo come volume fisico (come memoria) .
Se provo ad avviare il Gestore Bluetooth dal menù mi da il messaggio di errore:
Connessione a Bluez Fallita- IL demone non è in esecuzione..
Mi piacerebbe capire da dove partire per risolvere il problema: cioè se l'adattatore non è funzionante o occorre preparare il sistema per questa device
Grazie dell'aiuto
Re: USB Bluetooth Dongle non riconosciuto
Inviato: martedì 25 dicembre 2018, 0:55
da maxbigsi
nella attesa che passi il mago installa il pacchetto bluez intanto
Re: USB Bluetooth Dongle non riconosciuto
Inviato: martedì 25 dicembre 2018, 1:02
da willy54
Potrebbe anche non essere riconosciuto posta anche
Re: USB Bluetooth Dongle non riconosciuto
Inviato: martedì 25 dicembre 2018, 1:14
da akplm
Allora:
Bluez è gia istallato. :
Codice: Seleziona tutto
bluez è già alla versione più recente (5.48-0ubuntu3.1).
sul riconoscimento:
Codice: Seleziona tutto
akplm@akplm-HP-655-Notebook-PC:~$ lsusb
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 002: ID e5b7:0811
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 04f2:b2f4 Chicony Electronics Co., Ltd
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Dovrebbe essere quel Chicony..(dovrebbe...)
Re: USB Bluetooth Dongle non riconosciuto
Inviato: martedì 25 dicembre 2018, 1:31
da willy54
Il bluetooth è questo
Bus 004 Device 002: ID e5b7:0811
non riconosciuto o guasto, ma dovrai attendere il
Mago per le indicazioni per sistemarlo, lo segnalo potrebbe essere utile se conosci marca e modello segnalarlo.
Bus 001 Device 003: ID 04f2:b2f4 Chicony Electronics Co., Ltd
è la telecamera integrata.
Re: USB Bluetooth Dongle non riconosciuto
Inviato: martedì 25 dicembre 2018, 1:59
da akplm
allora: su un win10 con cui ho provato lo vede sempre come volume e lo riconosce come JieLi AC4100
Preciso che neanche su win sembra funzionare ne mi richiede driver ma lo riconosce...
Re: USB Bluetooth Dongle non riconosciuto
Inviato: martedì 25 dicembre 2018, 17:40
da magozurlinux
Ciao.
Mi sembra strano che un dongle blutooth venga visto come dispositivo di massa.
Da terminale postami questi comandi:
Re: USB Bluetooth Dongle non riconosciuto
Inviato: martedì 25 dicembre 2018, 19:51
da OMBRA_Linux
Domanda: Le cuffie non erano provviste di Dongle?
A parte questo: Spegni il Computer cambia porta USB accendilo, e vedi cosa succede.
Re: USB Bluetooth Dongle non riconosciuto
Inviato: martedì 25 dicembre 2018, 23:02
da akplm
Codice: Seleziona tutto
akplm@akplm-HP-655-Notebook-PC:~$ usb-devices
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 5
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0002 Rev=04.15
S: Manufacturer=Linux 4.15.0-34-generic ehci_hcd
S: Product=EHCI Host Controller
S: SerialNumber=0000:00:12.2
C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=04f2 ProdID=b2f4 Rev=11.18
S: Manufacturer=Chicony Electronics Co.,Ltd.
S: Product=HP Webcam-50
S: SerialNumber=0x0001
C: #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=0e(video) Sub=01 Prot=00 Driver=uvcvideo
I: If#= 1 Alt= 0 #EPs= 0 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 4
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0002 Rev=04.15
S: Manufacturer=Linux 4.15.0-34-generic ehci_hcd
S: Product=EHCI Host Controller
S: SerialNumber=0000:00:16.2
C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 5
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0001 Rev=04.15
S: Manufacturer=Linux 4.15.0-34-generic ohci_hcd
S: Product=OHCI PCI host controller
S: SerialNumber=0000:00:12.0
C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=e5b7 ProdID=0811 Rev=01.00
S: Manufacturer=ZhuHai JieLi Technology
S: Product=JieLi AC4100
C: #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=400mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
T: Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 4
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0001 Rev=04.15
S: Manufacturer=Linux 4.15.0-34-generic ohci_hcd
S: Product=OHCI PCI host controller
S: SerialNumber=0000:00:16.0
C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
akplm@akplm-HP-655-Notebook-PC:~$
Codice: Seleziona tutto
akplm@akplm-HP-655-Notebook-PC:~$ dmesg | grep usb
[ 0.176259] usbcore: registered new interface driver usbfs
[ 0.176280] usbcore: registered new interface driver hub
[ 0.176340] usbcore: registered new device driver usb
[ 2.512458] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.512462] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.512466] usb usb1: Product: EHCI Host Controller
[ 2.512469] usb usb1: Manufacturer: Linux 4.15.0-34-generic ehci_hcd
[ 2.512472] usb usb1: SerialNumber: 0000:00:12.2
[ 2.528492] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.528496] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.528499] usb usb2: Product: EHCI Host Controller
[ 2.528503] usb usb2: Manufacturer: Linux 4.15.0-34-generic ehci_hcd
[ 2.528506] usb usb2: SerialNumber: 0000:00:16.2
[ 2.592469] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.592476] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.592479] usb usb3: Product: OHCI PCI host controller
[ 2.592482] usb usb3: Manufacturer: Linux 4.15.0-34-generic ohci_hcd
[ 2.592486] usb usb3: SerialNumber: 0000:00:12.0
[ 2.656455] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.656461] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.656465] usb usb4: Product: OHCI PCI host controller
[ 2.656468] usb usb4: Manufacturer: Linux 4.15.0-34-generic ohci_hcd
[ 2.656471] usb usb4: SerialNumber: 0000:00:16.0
[ 2.848168] usb 1-3: new high-speed USB device number 2 using ehci-pci
[ 3.048996] usb 1-3: New USB device found, idVendor=04f2, idProduct=b2f4
[ 3.049002] usb 1-3: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 3.049005] usb 1-3: Product: HP Webcam-50
[ 3.049009] usb 1-3: Manufacturer: Chicony Electronics Co.,Ltd.
[ 3.049012] usb 1-3: SerialNumber: 0x0001
[ 22.064482] input: HP Webcam-50: HP Webcam-50 as /devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3:1.0/input/input11
[ 22.064673] usbcore: registered new interface driver uvcvideo
[ 2865.293866] usb 3-2: new full-speed USB device number 2 using ohci-pci
[ 2865.516948] usb 3-2: New USB device found, idVendor=e5b7, idProduct=0811
[ 2865.516959] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2865.516966] usb 3-2: Product: JieLi AC4100
[ 2865.516972] usb 3-2: Manufacturer: ZhuHai JieLi Technology
[ 2865.933139] usb-storage 3-2:1.0: USB Mass Storage device detected
[ 2865.935359] scsi host2: usb-storage 3-2:1.0
[ 2865.935696] usbcore: registered new interface driver usb-storage
[ 2865.959084] usbcore: registered new interface driver uas
akplm@akplm-HP-655-Notebook-PC:~$
Codice: Seleziona tutto
akplm@akplm-HP-655-Notebook-PC:~$ dpkg -l | grep blue
ii blueman 2.0.5-1ubuntu1 amd64 Graphical bluetooth manager
ii bluetooth 5.48-0ubuntu3.1 all Bluetooth support
ii bluez 5.48-0ubuntu3.1 amd64 Bluetooth tools and daemons
ii bluez-obexd 5.48-0ubuntu3.1 amd64 bluez obex daemon
ii libbluetooth3:amd64 5.48-0ubuntu3.1 amd64 Library to use the BlueZ Linux Bluetooth stack
Codice: Seleziona tutto
akplm@akplm-HP-655-Notebook-PC:~$ hciconfig -a
akplm@akplm-HP-655-Notebook-PC:~$
No le cuffie non erano dotate di dongle, semplici cuffie bluetooth JBL
Re: USB Bluetooth Dongle non riconosciuto
Inviato: mercoledì 26 dicembre 2018, 10:59
da magozurlinux
T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=e5b7 ProdID=0811 Rev=01.00
S: Manufacturer=ZhuHai JieLi Technology
S: Product=JieLi AC4100
C: #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=400mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
Nessun dongle bluetooth usb rilevato, quello evidenziato è una chiavetta dati usb oppure è rotta e non viene rilevata.
Posta una foto del dongle e possibilmente della confezione del dispositivo.
Re: USB Bluetooth Dongle non riconosciuto
Inviato: mercoledì 26 dicembre 2018, 14:35
da akplm
l'ho riportato al venditore.
anzi se avete un dongle da consigliarmi per le mie cuffie ben accetto
Re: USB Bluetooth Dongle non riconosciuto
Inviato: venerdì 28 dicembre 2018, 11:56
da OMBRA_Linux
1° Devi dirci Modello delle Cuffie.
2° Posta lo Screenshot della confezione del Dongle.
Consiglio:
Se vuoi andare a colpo sicuro se per esempio lo comperi on-line chiedi al rivenditore se sono compatibili con le cuffie che hai e per Linux.
Oppure leggi le caratteristiche riportate nella pagina ove acquisti.
Stessa cosa la puoi fare se lo comperi fisicamente in un negozio vicino.