Re: Problema hard disk esterno
Inviato: lunedì 31 dicembre 2018, 15:42
Salve, sì, direi che è /dev/sde , il /dev/sda è il disco interno.
CiaoIl forum della comunità italiana di Ubuntu.
https://forum.ubuntu-it.org/
Salve, sì, direi che è /dev/sde , il /dev/sda è il disco interno.
Ciao
Salve, se posti l'output rispondiamo.
CiaoCodice: Seleziona tutto
sudo smartctl -a /dev/sde
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.18.0-10-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Samsung SpinPoint M8U (USB)
Device Model: ST1000LM025 HN-M101ABB
Serial Number: F1833G94AA0CGK
LU WWN Device Id: 0 000000 000000000
Firmware Version: 2BA30001
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 2.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 6
SATA Version is: SATA 3.0, 3.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Mon Dec 31 15:04:33 2018 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART Status not supported: Incomplete response, ATA output registers missing
SMART overall-health self-assessment test result: PASSED
Warning: This result is based on an Attribute check.
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (12480) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 208) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 100 100 051 Pre-fail Always - 1401
2 Throughput_Performance 0x0026 252 252 000 Old_age Always - 0
3 Spin_Up_Time 0x0023 090 087 025 Pre-fail Always - 3264
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 589
5 Reallocated_Sector_Ct 0x0033 252 252 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 252 252 051 Old_age Always - 0
8 Seek_Time_Performance 0x0024 252 252 015 Old_age Offline - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 133
10 Spin_Retry_Count 0x0032 252 252 051 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 567
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 260
191 G-Sense_Error_Rate 0x0022 100 100 000 Old_age Always - 42
192 Power-Off_Retract_Count 0x0022 252 252 000 Old_age Always - 0
194 Temperature_Celsius 0x0002 064 060 000 Old_age Always - 24 (Min/Max 18/49)
195 Hardware_ECC_Recovered 0x003a 100 100 000 Old_age Always - 0
196 Reallocated_Event_Count 0x0032 252 252 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 26
198 Offline_Uncorrectable 0x0030 252 252 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0036 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x002a 100 100 000 Old_age Always - 44
223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 567
225 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 4782
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Completed [00% left] (0-65535)
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
ubuntu@ubuntu:~$
Salve, volevo ben dire, leggendo l'output completo non ci sono settori danneggiati, il HDD è poco usato ed in buone condizioni.
Ciaoho aperto il file manager ma non trovo il percorso media / ubuntu ecc....wilecoyote [url=https://forum.ubuntu-it.org/viewtopic.php?p=5104788#p5104788][img]https://forum.ubuntu-it.org/images/icons/icona-cita.gif[/img][/url] ha scritto:Salve, volevo ben dire, leggendo l'output completo non ci sono settori danneggiati, il HDD è poco usato ed in buone condizioni.
Avvia il file manager, clicca sulla directory media→ubuntu→<nomeHDDM3> (non so come l'hai chiamato) e naviga fino ai file di tuo interesse, copiali s'un altro supporto sufficientemente capiente.
Ciao

scusa ma prima avevo fatto due post consecutivi perche non avevo visto che si era aggiunta la seconda pagina.trekfan1 [url=https://forum.ubuntu-it.org/viewtopic.php?p=5104792#p5104792][img]https://forum.ubuntu-it.org/images/icons/icona-cita.gif[/img][/url] ha scritto:Il file manager è nautilus, ovvero la schermata che ti si apre cliccando su FILE, ti ricordo che questo è un forum, non è una chat o facebook, per favore non fare post consecutivi ma se non ci sono interventi clicca su Modifica e aggiungi il nuovo testo eventualmente preceduto da EDIT, grazie
scusa ma non mi sono mai iscritto in un forum e certe cose non le sapevo spero di fare tutto nel modo giusto adesso.trekfan1 [url=https://forum.ubuntu-it.org/viewtopic.php?p=5104799#p5104799][img]https://forum.ubuntu-it.org/images/icons/icona-cita.gif[/img][/url] ha scritto:Allora non ci siamo capiti con le immagini! Carichi le immagini ORIGINALI grandi su postimage e metti qua il link della miniatura ovvero la riga dove c'è scritto "Thumbnail for forums", cmq /media/ubuntu è il percorso da scrivere nel terminale, in nautilus devi cliccare su Altre posizioni -> nome del disco

Salve, colpa mia se non trovi il media ed ecc.
Ciaoil 1000 gb volume e l-hard disk interno quello esterno non viene rilevatowilecoyote [url=https://forum.ubuntu-it.org/viewtopic.php?p=5104803#p5104803][img]https://forum.ubuntu-it.org/images/icons/icona-cita.gif[/img][/url] ha scritto:Salve, colpa mia se non trovi il media ed ecc.
, in Nautilus il percorso è Dispositivi → Volumi → 1000 GB Volume .
Son troppo assuefatto ad usare Dolphin, il file manager di Kubuntu KDE.
Ciao

Salve, si certo, proviamo il montaggio manuale dal terminale col comando:Codice: Seleziona tutto
sudo mount -t ntfs /dev/sde /media/ubuntu/SamsungM3
Ciaowilecoyote [url=https://forum.ubuntu-it.org/viewtopic.php?p=5104807#p5104807][img]https://forum.ubuntu-it.org/images/icons/icona-cita.gif[/img][/url] ha scritto:Salve, si certo, proviamo il montaggio manuale dal terminale col comando:
Se lo monta lo vedi in Nautilus.Codice: Seleziona tutto
sudo mount -t ntfs /dev/sde /media/ubuntu/SamsungM3
Ciao
Codice: Seleziona tutto
ubuntu@ubuntu:~$ sudo mount -t ntfs /dev/sde /media/ubuntu/SamsungM3
NTFS signature is missing.
Failed to mount '/dev/sde': Invalid argument
The device '/dev/sde' doesn't seem to have a valid NTFS.
Maybe the wrong device is used? Or the whole disk instead of a
partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around?
ubuntu@ubuntu:~$


Salve, manca un 1… Codice: Seleziona tutto
sudo mount -t ntfs /dev/sde1 /media/ubuntu/SamsungM3
Ciaowilecoyote [url=https://forum.ubuntu-it.org/viewtopic.php?p=5104810#p5104810][img]https://forum.ubuntu-it.org/images/icons/icona-cita.gif[/img][/url] ha scritto:Salve, manca un 1…
![]()
Codice: Seleziona tutto
sudo mount -t ntfs /dev/sde1 /media/ubuntu/SamsungM3Ciao
Codice: Seleziona tutto
$ sudo mount -t ntfs /dev/sde1 /media/ubuntu/SamsungM3
Error reading $MFT: Input/output error
Failed to load $MFT: Input/output error
Failed to mount '/dev/sde1': Input/output error
NTFS is either inconsistent, or there is a hardware fault, or it's a
SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows
then reboot into Windows twice. The usage of the /f parameter is very
important! If the device is a SoftRAID/FakeRAID then first activate
it and mount a different device under the /dev/mapper/ directory, (e.g.
/dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentation
for more details.
Salve, ecco appunto, appare anche nel terminale la spiegazione…
CiaoCodice: Seleziona tutto
Error reading $MFT: Input/output error
Failed to load $MFT: Input/output error
Failed to mount '/dev/sde1': Input/output errora me non interessa recupera l-hard disk ma il suo contenutopachisapiu [url=https://forum.ubuntu-it.org/viewtopic.php?p=5104815#p5104815][img]https://forum.ubuntu-it.org/images/icons/icona-cita.gif[/img][/url] ha scritto:Ahi AHi AHi brutto messaggio di errore ...al 99% il disco ti sta dicendo addio !Codice: Seleziona tutto
Error reading $MFT: Input/output error Failed to load $MFT: Input/output error Failed to mount '/dev/sde1': Input/output error
ti avevo già postato ...Peppehino [url=https://forum.ubuntu-it.org/viewtopic.php?p=5104816#p5104816][img]https://forum.ubuntu-it.org/images/icons/icona-cita.gif[/img][/url] ha scritto:a me non interessa recupera l-hard disk ma il suo contenutopachisapiu [url=https://forum.ubuntu-it.org/viewtopic.php?p=5104815#p5104815][img]https://forum.ubuntu-it.org/images/icons/icona-cita.gif[/img][/url] ha scritto:Ahi AHi AHi brutto messaggio di errore ...al 99% il disco ti sta dicendo addio !Codice: Seleziona tutto
Error reading $MFT: Input/output error Failed to load $MFT: Input/output error Failed to mount '/dev/sde1': Input/output error
ma se non monti il disco non recuperi nullapachisapiu [url=https://forum.ubuntu-it.org/viewtopic.php?p=5104729#p5104729][img]https://forum.ubuntu-it.org/images/icons/icona-cita.gif[/img][/url] ha scritto:Se vuoi tentare il recupero dati puoi provare ad usare questo ...
https://www.cgsecurity.org/wiki/PhotoRec_IT
https://www.cgsecurity.org/wiki/PhotoRe ... Dopo_Passo