Grazie mille!
No, nulla sto impazzendo ti allego i vari errori
Codice: Seleziona tutto
root@Sem:~# sudo lshw -c network
*-network
description: Ethernet interface
product: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
vendor: Realtek Semiconductor Co., Ltd.
physical id: 0
bus info: pci@0000:01:00.0
logical name: enp1s0
version: 0c
serial: 98:ee:cb:32:27:e2
size: 1Gbit/s
capacity: 1Gbit/s
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=r8169 duplex=full firmware=rtl8168g-2_0.0.1 02/06/13 ip=192.168.1.126 latency=0 link=yes multicast=yes port=MII speed=1Gbit/s
resources: irq:36 ioport:e000(size=256) memory:fea00000-fea00fff memory:d0800000-d0803fff
*-network
description: Wireless interface
physical id: 1
bus info: usb@8:2
logical name: wlx98ded00fb190
serial: 98:de:d0:0f:b1:90
capabilities: ethernet physical wireless
configuration: broadcast=yes driver=rtl8xxxu driverversion=5.3.0-46-generic firmware=N/A link=no multicast=yes wireless=IEEE 802.11
Codice: Seleziona tutto
root@Sem:~# lsusb
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 003: ID 0bda:0153 Realtek Semiconductor Corp. 3-in-1 (SD/SDHC/SDXC) Card Reader
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 002: ID 1a2c:0e24 China Resource Semico Co., Ltd USB Keyboard
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 002: ID 0461:4e70 Primax Electronics, Ltd USB Optical Mouse
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 009 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 008 Device 002: ID 2357:0109 TP-Link TL WN823N RTL8192EU
Bus 008 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 007 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 006 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Credo che il driver sia totalmente diverso dal topic che sto seguendo
Ho anche eseguito questa parte di codice ma restituisce un errore
Codice: Seleziona tutto
sudo -s
cd /usr/src/rtl8192eu-linux-driver
dkms add .
dkms install rtl8192eu/1.0
Ma non è accaduto nulla.
Ho anche provato a seguire il totorial della Tp-Link ma non riesco a fare funzionare il file da modificare
Spero di avervi dato più informazioni necessarie