[Risolto] Non mi funziano stampanti HP con Kubuntu 20.04.

[campacavallo]

Da quando sono passato da Kubuntu 18.04 a Kubuntu 20.04 la stampante HP Laserjet P1006 non mi funziona più. Idem per un'altra stampante HP Laserjet Professional P 1102w. Do il comando "hp-setup" e ottengo una finestrella con il messaggio "Firmware downloaad Failed". No so più che fare.

PPD file: drv:///hpcups.drv/hp-laserjet_p1006.ppd

[Roberto Pontecorvi]

Quali drive hp stai usando?

[campacavallo]

Quali drive hp stai usando?

Io non scelgo il driver. Eseguendo hp-setup fa tutto lui. Riconosce la stampante e poi va in errore, penso mentre cerca di caricare il file

drv:///hpcups.drv/hp-laserjet_p1006.ppd

[Roberto Pontecorvi]

Quando avvii hp-doctor nelle prime righe c'è l'indicazione dei drive del tipo 3.2x.x a te cosa compare? Posta il risultato del comando.

[campacavallo]

Quando avvii hp-doctor nelle prime righe c'è l'indicazione dei drive del tipo 3.2x.x a te cosa compare? Posta il risultato del comando.

Ecco:

Codice: Seleziona tutto

/usr/share/hplip/check.py:685: SyntaxWarning: "is not" with a literal. Did you mean "!="?
  if 'getfacl' not in g and '' is not g and 'file' not in g:

HP Linux Imaging and Printing System (ver. 3.20.6)
Self Diagnse Utility and Healing Utility ver. 1.0

Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.


HP Linux Imaging and Printing System (ver. 3.20.6)
Self Diagnse Utility and Healing Utility ver. 1.0

Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

 

Checking for Deprecated items....
No Deprecated items are found


Checking for HPLIP updates....

HP Linux Imaging and Printing System (ver. 3.20.6)
HPLIP upgrade latest version ver. 1.0

Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

Latest version of HPLIP is already installed.


Checking for Dependencies....

---------------
| SYSTEM INFO |
---------------

 Kernel: 5.4.0-45-generic #49-Ubuntu SMP Wed Aug 26 13:38:52 UTC 2020 GNU/Linux
 Host: livio-Lenovo
 Proc: 5.4.0-45-generic #49-Ubuntu SMP Wed Aug 26 13:38:52 UTC 2020 GNU/Linux
 Distribution: 12 20.04
 Bitness: 64 bit


-----------------------
| HPLIP CONFIGURATION |
-----------------------

HPLIP-Version: HPLIP 3.20.6
HPLIP-Home: /usr/share/hplip
HPLIP-Installation: Auto installation is supported for ubuntu distro  20.04 version 

Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf.  Generated from hplip.conf.in by configure.

[hplip]
version=3.20.6

[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/hplip/HP
ppdbase=/usr/share/ppd/hplip
doc=/usr/share/doc/hplip-3.20.6
html=/usr/share/doc/hplip-3.20.6
icon=/usr/share/applications
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv/hp
bin=/usr/bin
apparmor=/etc/apparmor.d
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
libusb01-build=no
pp-build=no
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=no
foomatic-drv-install=no
foomatic-ppd-install=no
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.20.6
restricted-build=no
ui-toolkit=qt5
qt3=no
qt4=no
qt5=yes
policy-kit=no
lite-build=no
udev_sysfs_rules=no
hpcups-only-build=no
hpijs-only-build=no
apparmor_build=yes
class-driver=no


Current contents of '/var/lib/hp/hplip.state' file:
Plugins are not installed. Could not access file: No such file or directory

Current contents of '~/.hplip/hplip.conf' file:
[upgrade]
notify_upgrade = true
last_upgraded_time = 1593683524
pending_upgrade_time = 0
latest_available_version = 3.17.10

[installation]
date_time = 09/02/20 21:18:40
version = 3.20.6


 <Package-name>        <Package-Desc>      <Required/Optional> <Min-Version> <Installed-Version> <Status>   <Comment>

-------------------------
| External Dependencies |
-------------------------

 cups                 CUPS - Common Unix Printing System                           REQUIRED        1.1             2.3.1           OK         'CUPS Scheduler is running'
 gs                   GhostScript - PostScript and PDF language interpreter and previewer REQUIRED        7.05            9.50            OK         -
 xsane                xsane - Graphical scanner frontend for SANE                  OPTIONAL        0.9             0.999           OK         -
 scanimage            scanimage - Shell scanning program                           OPTIONAL        1.0             1.0.29          OK         -
 dbus                 DBus - Message bus system                                    REQUIRED        -               1.12.16         OK         -
 policykit            PolicyKit - Administrative policy framework                  OPTIONAL        -               0.105           OK         -
 network              network -wget                                                OPTIONAL        -               1.20.3          OK         -
 avahi-utils          avahi-utils                                                  OPTIONAL        -               0.7             OK         -

------------------------
| General Dependencies |
------------------------

 libjpeg              libjpeg - JPEG library                                       REQUIRED        -               -               OK         -
 cups-devel           CUPS devel- Common Unix Printing System development files    REQUIRED        -               2.3.1           OK         -
 cups-image           CUPS image - CUPS image development files                    REQUIRED        -               2.3.1           OK         -
 libpthread           libpthread - POSIX threads library                           REQUIRED        -               b'2.31'         OK         -
 libusb               libusb - USB library                                         REQUIRED        -               1.0             OK         -
 sane                 SANE - Scanning library                                      REQUIRED        -               -               OK         -
 sane-devel           SANE - Scanning library development files                    REQUIRED        -               -               OK         -
 libnetsnmp-devel     libnetsnmp-devel - SNMP networking library development files REQUIRED        5.0.9           5.8             OK         -
 libcrypto            libcrypto - OpenSSL cryptographic library                    REQUIRED        -               1.1.1           OK         -
 python3X             Python 2.2 or greater - Python programming language          REQUIRED        2.2             3.8.2           OK         -
 python3-notify2      Python libnotify - Python bindings for the libnotify Desktop notifications OPTIONAL        -               -               OK         -
 python3-pyqt5-dbus   PyQt 5 DBus - DBus Support for PyQt5                         OPTIONAL        5.0             5.14.1          OK         -
 python3-pyqt5        PyQt 5- Qt interface for Python (for Qt version 4.x)         REQUIRED        5.0             5.14.1          OK         -
 python3-dbus         Python DBus - Python bindings for DBus                       REQUIRED        0.80.0          1.2.16          OK         -
 python3-xml          Python XML libraries                                         REQUIRED        -               2.2.9           OK         -
 python3-devel        Python devel - Python development files                      REQUIRED        2.2             3.8.2           OK         -
 python3-pil          PIL - Python Imaging Library (required for commandline scanning with hp-scan) OPTIONAL        -               7.0.0           OK         -
 python3-reportlab    Reportlab - PDF library for Python                           OPTIONAL        2.0             3.5.34          OK         -

--------------
| COMPILEDEP |
--------------

 libtool              libtool - Library building support services                  REQUIRED        -               2.4.6           OK         -
 gcc                  gcc - GNU Project C and C++ Compiler                         REQUIRED        -               9.3.0           OK         -
 make                 make - GNU make utility to maintain groups of programs       REQUIRED        3.0             4.2.1           OK         -

---------------------
| Python Extentions |
---------------------

 cupsext              CUPS-Extension                                               REQUIRED        -               3.20.6          OK         -
 hpmudext             IO-Extension                                                 REQUIRED        -               3.20.6          OK         -

----------------------
| Scan Configuration |
----------------------

 hpaio                HPLIP-SANE-Backend                                           REQUIRED        -               3.20.6          OK         'hpaio found in /etc/sane.d/dll.conf'
 scanext              Scan-SANE-Extension                                          REQUIRED        -               3.20.6          OK         -

------------------------------
| DISCOVERED SCANNER DEVICES |
------------------------------

No Scanner found.

--------------------------
| DISCOVERED USB DEVICES |
--------------------------

No devices found.

---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------

 
HP_LaserJet_P1006_2_carla_Asus_2
--------------------------------
Type: Unknown
Device URI: implicitclass://HP_LaserJet_P1006_2_carla_Asus_2/
PPD: /etc/cups/ppd/HP_LaserJet_P1006_2_carla_Asus_2.ppd
warning: Failed to read /etc/cups/ppd/HP_LaserJet_P1006_2_carla_Asus_2.ppd ppd file
PPD Description: 
Printer status: la stampante HP_LaserJet_P1006_2_carla_Asus_2 è inattiva.  è stata abilitata da mer 2 set 2020, 21:17:57
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend for HP-Devices.

HP_LaserJet_P1006_3_carla_Asus_2
--------------------------------
Type: Unknown
Device URI: implicitclass://HP_LaserJet_P1006_3_carla_Asus_2/
PPD: /etc/cups/ppd/HP_LaserJet_P1006_3_carla_Asus_2.ppd
warning: Failed to read /etc/cups/ppd/HP_LaserJet_P1006_3_carla_Asus_2.ppd ppd file
PPD Description: 
Printer status: la stampante HP_LaserJet_P1006_3_carla_Asus_2 è inattiva.  è stata abilitata da mer 2 set 2020, 21:17:57
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend for HP-Devices.

HP_LaserJet_P1006_carla_Asus_2
------------------------------
Type: Unknown
Device URI: implicitclass://HP_LaserJet_P1006_carla_Asus_2/
PPD: /etc/cups/ppd/HP_LaserJet_P1006_carla_Asus_2.ppd
warning: Failed to read /etc/cups/ppd/HP_LaserJet_P1006_carla_Asus_2.ppd ppd file
PPD Description: 
Printer status: la stampante HP_LaserJet_P1006_carla_Asus_2 è inattiva.  è stata abilitata da mer 2 set 2020, 21:17:57
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend for HP-Devices.


--------------
| PERMISSION |
--------------

 

Checking Permissions....


Checking for Configured Queues....
warning: Fail to read ppd=/etc/cups/ppd/HP_LaserJet_P1006_2_carla_Asus_2.ppd file
warning: Insufficient permission to access file /etc/cups/ppd/HP_LaserJet_P1006_2_carla_Asus_2.ppd
warning: Could not complete Queue(s) configuration check


Checking for HP Properitery Plugin's....
No plug-in printers are configured.
 
Diagnose completed...



More information on Troubleshooting,How-To's and Support is available on http://hplipopensource.com/hplip-web/index.html

[Roberto Pontecorvi]

Ci sono due errori che vanno corretti. Il 1^ è questo:

Codice: Seleziona tutto

warning: Failed to read /etc/cups/ppd/HP_LaserJet_P1006_3_carla_Asus_2.ppd ppd file

Con il programma di gestione dei file (penso che tu usi nautilus) vai nella catella - etc - da qui apri la cartella -> cups - con i permessi di amministratore, una volta all'interno di cups evidenzia il file -> HP_LaserJet_P1006_3_carla_Asus_2.ppd tasto destro del mouse -> proprietà -> Permessi. Nel campo -> Accesso - freccia in giù e da qui scegli il nome con cui sei amministratore del tuo SO, la stessa cosa per il campo -> Gruppo. Metti la spunta sulla casella -> Consentire l'esecuzione del file come programma - ed in fine tasto -> XChiudi.
Il secondo problema è quello che il comando ti dice che i plugin non sono installati. Molti dicono che con la nuova versione di hplip, la serie 3.20.6, quella che stai usando, i plugin non servono. Ora se li vuoi installare dai il comando:

Codice: Seleziona tutto

hp-plugin -i

e segui le istruzioni.

[campacavallo]

1 : Il file HP_LaserJet_P1006_3_carla_Asus_2.ppd non c'è.
2 : Eseguendo "hp-plugin -i" va in errore...

Adesso provo a cancellare tutto e a reinstallare.

[Roberto Pontecorvi]

Nel post precedente ho fatto un errore, il file si trova nella directory:

Codice: Seleziona tutto

/etc/cups/ppd/HP_LaserJet_P1006_3_carla_Asus_2.ppd ppd file

per cui devi are il percorso -> etc > cups > ppd e qui trovi il file. Avevo dimenticato directory ppd. Per il comando hp-plugin -i se non posti l'errore come faccio a capire? La sfera magica gli amministratori del forum ancora non la hanno fornita.

[campacavallo]

Nel post precedente ho fatto un errore, il file si trova nella directory:

Codice: Seleziona tutto

/etc/cups/ppd/HP_LaserJet_P1006_3_carla_Asus_2.ppd ppd file

per cui devi are il percorso -> etc > cups > ppd e qui trovi il file. Avevo dimenticato directory ppd. Per il comando hp-plugin -i se non posti l'errore come faccio a capire? La sfera magica gli amministratori del forum ancora non la hanno fornita.

Uso Dolphin in Kubuntu. Una volta da console potevo dare il comando "sudo Dolphin", ma ora non me lo lascia più fare.

Ho trovato HP_Laserjet... nella cartella /etc/cups/ppd, ma non riesco a modificare nulla, dice che solo il proprietario, root, può fare modifiche. Senonché in impostazioni di sistema > Personalizzazione > dettagli dell'account > Gestore utenti, l'utente root non c'è. Ricordo che anni fa c'era, disabilitato, ma si poteva abilitare (io lo facevo per dagli la stessa password che uso per il mio account).

Morale: non riesco a modificare i permessi del file in questione.

Che posso fare?

Quanto all'errore di "hp-plugin -i" pensavo di occuparmene dopo aver risolto il primo problema. Comunque ecco che cosa succede:

Codice: Seleziona tutto

HP Linux Imaging and Printing System (ver. 3.20.6)
Plugin Download and Install Utility ver. 2.1

Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.


HP Linux Imaging and Printing System (ver. 3.20.6)
Plugin Download and Install Utility ver. 2.1

Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

(Note: Defaults for each question are maked with a '*'. Press <enter> to accept the default.)


-----------------------------------------
| PLUG-IN INSTALLATION FOR HPLIP 3.20.6 |
-----------------------------------------

  Option      Description                                       
  ----------  --------------------------------------------------
  d           Download plug-in from HP (recommended)            
  p           Specify a path to the plug-in (advanced)          
  q           Quit hp-plugin (skip installation)                

Enter option (d=download*, p=specify path, q=quit) ? 

-------------------
| DOWNLOAD PLUGIN |
-------------------

Checking for network connection...
Downloading plug-in from: 
Downloading plug-in: [\                                                                                                                                                  ] 0%     Traceback (most recent call last):
  File "/usr/share/hplip/base/password.py", line 85, in get_distro_name
    os_name = platform.dist()[0]
AttributeError: module 'platform' has no attribute 'dist'

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/usr/bin/hp-plugin", line 363, in <module>
    status, plugin_path, error_str = pluginObj.download(plugin_path, plugin_download_callback)
  File "/usr/share/hplip/installer/pluginhandler.py", line 254, in download
    core = core_install.CoreInstall()
  File "/usr/share/hplip/installer/core_install.py", line 240, in __init__
    self.passwordObj = password.Password(ui_mode)
  File "/usr/share/hplip/base/password.py", line 118, in __init__
    self.__readAuthType()  # self.__authType
  File "/usr/share/hplip/base/password.py", line 141, in __readAuthType
    distro_name = get_distro_name().lower().replace(" ","")
  File "/usr/share/hplip/base/password.py", line 88, in get_distro_name
    os_name = distro.linux_distribution()[0]
  File "/usr/lib/python3/dist-packages/distro.py", line 122, in linux_distribution
    return _distro.linux_distribution(full_distribution_name)
  File "/usr/lib/python3/dist-packages/distro.py", line 677, in linux_distribution
    self.version(),
  File "/usr/lib/python3/dist-packages/distro.py", line 737, in version
    self.lsb_release_attr('release'),
  File "/usr/lib/python3/dist-packages/distro.py", line 899, in lsb_release_attr
    return self._lsb_release_info.get(attribute, '')
  File "/usr/lib/python3/dist-packages/distro.py", line 552, in __get__
    ret = obj.__dict__[self._fname] = self._f(obj)
  File "/usr/lib/python3/dist-packages/distro.py", line 1012, in _lsb_release_info
    stdout = subprocess.check_output(cmd, stderr=devnull)
  File "/usr/lib/python3.8/subprocess.py", line 411, in check_output
    return run(*popenargs, stdout=PIPE, timeout=timeout, check=True,
  File "/usr/lib/python3.8/subprocess.py", line 512, in run
    raise CalledProcessError(retcode, process.args,
subprocess.CalledProcessError: Command '('lsb_release', '-a')' returned non-zero exit status 1.
Error in sys.excepthook:
Traceback (most recent call last):
  File "/usr/lib/python3/dist-packages/apport_python_hook.py", line 153, in apport_excepthook
    with os.fdopen(os.open(pr_filename,
PermissionError: [Errno 13] Permission denied: '/var/crash/_usr_share_hplip_plugin.py.1000.crash'

Original exception was:
Traceback (most recent call last):
  File "/usr/share/hplip/base/password.py", line 85, in get_distro_name
    os_name = platform.dist()[0]
AttributeError: module 'platform' has no attribute 'dist'

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/usr/bin/hp-plugin", line 363, in <module>
    status, plugin_path, error_str = pluginObj.download(plugin_path, plugin_download_callback)
  File "/usr/share/hplip/installer/pluginhandler.py", line 254, in download
    core = core_install.CoreInstall()
  File "/usr/share/hplip/installer/core_install.py", line 240, in __init__
    self.passwordObj = password.Password(ui_mode)
  File "/usr/share/hplip/base/password.py", line 118, in __init__
    self.__readAuthType()  # self.__authType
  File "/usr/share/hplip/base/password.py", line 141, in __readAuthType
    distro_name = get_distro_name().lower().replace(" ","")
  File "/usr/share/hplip/base/password.py", line 88, in get_distro_name
    os_name = distro.linux_distribution()[0]
  File "/usr/lib/python3/dist-packages/distro.py", line 122, in linux_distribution
    return _distro.linux_distribution(full_distribution_name)
  File "/usr/lib/python3/dist-packages/distro.py", line 677, in linux_distribution
    self.version(),
  File "/usr/lib/python3/dist-packages/distro.py", line 737, in version
    self.lsb_release_attr('release'),
  File "/usr/lib/python3/dist-packages/distro.py", line 899, in lsb_release_attr
    return self._lsb_release_info.get(attribute, '')
  File "/usr/lib/python3/dist-packages/distro.py", line 552, in __get__
    ret = obj.__dict__[self._fname] = self._f(obj)
  File "/usr/lib/python3/dist-packages/distro.py", line 1012, in _lsb_release_info
    stdout = subprocess.check_output(cmd, stderr=devnull)
  File "/usr/lib/python3.8/subprocess.py", line 411, in check_output
    return run(*popenargs, stdout=PIPE, timeout=timeout, check=True,
  File "/usr/lib/python3.8/subprocess.py", line 512, in run
    raise CalledProcessError(retcode, process.args,
subprocess.CalledProcessError: Command '('lsb_release', '-a')' returned non-zero exit status 1.

[magozurlinux]

Da terminale prova a dare questi comandi:

Codice: Seleziona tutto

sudo -s

e poi lanci dolphin sempre da terminale, senza sudo perché l'hai dato prima.

Vai nel file ppd della tua stampante e gli dai i permessi richiesti.

oppure

Codice: Seleziona tutto

sudo chmod 666 /etc/cups/ppd/HP_LaserJet_P1006_3_carla_Asus_2.ppd

[campacavallo]

Da terminale prova a dare questi comandi:

Codice: Seleziona tutto

sudo -s

e poi lanci dolphin sempre da terminale, senza sudo perché l'hai dato prima.

Vai nel file ppd della tua stampante e gli dai i permessi richiesti.

oppure

Codice: Seleziona tutto

sudo chmod 666 /etc/cups/ppd/HP_LaserJet_P1006_3_carla_Asus_2.ppd

Sono finalmente riuscito a cambiare i permessi del file HP LaseJet...., con chmod.
Però quando do il comando hp-plugin -i ottengo quanto segue:

Codice: Seleziona tutto

HP Linux Imaging and Printing System (ver. 3.20.6)
Plugin Download and Install Utility ver. 2.1

Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.


HP Linux Imaging and Printing System (ver. 3.20.6)
Plugin Download and Install Utility ver. 2.1

Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

(Note: Defaults for each question are maked with a '*'. Press <enter> to accept the default.)


-----------------------------------------
| PLUG-IN INSTALLATION FOR HPLIP 3.20.6 |
-----------------------------------------

  Option      Description                                       
  ----------  --------------------------------------------------
  d           Download plug-in from HP (recommended)            
  p           Specify a path to the plug-in (advanced)          
  q           Quit hp-plugin (skip installation)                

Enter option (d=download*, p=specify path, q=quit) ? 

-------------------
| DOWNLOAD PLUGIN |
-------------------

Checking for network connection...
Downloading plug-in from: 
Downloading plug-in: [\                                                                                                                                                  ] 0%     Traceback (most recent call last):
  File "/usr/share/hplip/base/password.py", line 85, in get_distro_name
    os_name = platform.dist()[0]
AttributeError: module 'platform' has no attribute 'dist'

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/usr/bin/hp-plugin", line 363, in <module>
    status, plugin_path, error_str = pluginObj.download(plugin_path, plugin_download_callback)
  File "/usr/share/hplip/installer/pluginhandler.py", line 254, in download
    core = core_install.CoreInstall()
  File "/usr/share/hplip/installer/core_install.py", line 240, in __init__
    self.passwordObj = password.Password(ui_mode)
  File "/usr/share/hplip/base/password.py", line 118, in __init__
    self.__readAuthType()  # self.__authType
  File "/usr/share/hplip/base/password.py", line 141, in __readAuthType
    distro_name = get_distro_name().lower().replace(" ","")
  File "/usr/share/hplip/base/password.py", line 88, in get_distro_name
    os_name = distro.linux_distribution()[0]
  File "/usr/lib/python3/dist-packages/distro.py", line 122, in linux_distribution
    return _distro.linux_distribution(full_distribution_name)
  File "/usr/lib/python3/dist-packages/distro.py", line 677, in linux_distribution
    self.version(),
  File "/usr/lib/python3/dist-packages/distro.py", line 737, in version
    self.lsb_release_attr('release'),
  File "/usr/lib/python3/dist-packages/distro.py", line 899, in lsb_release_attr
    return self._lsb_release_info.get(attribute, '')
  File "/usr/lib/python3/dist-packages/distro.py", line 552, in __get__
    ret = obj.__dict__[self._fname] = self._f(obj)
  File "/usr/lib/python3/dist-packages/distro.py", line 1012, in _lsb_release_info
    stdout = subprocess.check_output(cmd, stderr=devnull)
  File "/usr/lib/python3.8/subprocess.py", line 411, in check_output
    return run(*popenargs, stdout=PIPE, timeout=timeout, check=True,
  File "/usr/lib/python3.8/subprocess.py", line 512, in run
    raise CalledProcessError(retcode, process.args,
subprocess.CalledProcessError: Command '('lsb_release', '-a')' returned non-zero exit status 1.
Error in sys.excepthook:
Traceback (most recent call last):
  File "/usr/lib/python3/dist-packages/apport_python_hook.py", line 153, in apport_excepthook
    with os.fdopen(os.open(pr_filename,
PermissionError: [Errno 13] Permission denied: '/var/crash/_usr_share_hplip_plugin.py.1000.crash'

Original exception was:
Traceback (most recent call last):
  File "/usr/share/hplip/base/password.py", line 85, in get_distro_name
    os_name = platform.dist()[0]
AttributeError: module 'platform' has no attribute 'dist'

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/usr/bin/hp-plugin", line 363, in <module>
    status, plugin_path, error_str = pluginObj.download(plugin_path, plugin_download_callback)
  File "/usr/share/hplip/installer/pluginhandler.py", line 254, in download
    core = core_install.CoreInstall()
  File "/usr/share/hplip/installer/core_install.py", line 240, in __init__
    self.passwordObj = password.Password(ui_mode)
  File "/usr/share/hplip/base/password.py", line 118, in __init__
    self.__readAuthType()  # self.__authType
  File "/usr/share/hplip/base/password.py", line 141, in __readAuthType
    distro_name = get_distro_name().lower().replace(" ","")
  File "/usr/share/hplip/base/password.py", line 88, in get_distro_name
    os_name = distro.linux_distribution()[0]
  File "/usr/lib/python3/dist-packages/distro.py", line 122, in linux_distribution
    return _distro.linux_distribution(full_distribution_name)
  File "/usr/lib/python3/dist-packages/distro.py", line 677, in linux_distribution
    self.version(),
  File "/usr/lib/python3/dist-packages/distro.py", line 737, in version
    self.lsb_release_attr('release'),
  File "/usr/lib/python3/dist-packages/distro.py", line 899, in lsb_release_attr
    return self._lsb_release_info.get(attribute, '')
  File "/usr/lib/python3/dist-packages/distro.py", line 552, in __get__
    ret = obj.__dict__[self._fname] = self._f(obj)
  File "/usr/lib/python3/dist-packages/distro.py", line 1012, in _lsb_release_info
    stdout = subprocess.check_output(cmd, stderr=devnull)
  File "/usr/lib/python3.8/subprocess.py", line 411, in check_output
    return run(*popenargs, stdout=PIPE, timeout=timeout, check=True,
  File "/usr/lib/python3.8/subprocess.py", line 512, in run
    raise CalledProcessError(retcode, process.args,
subprocess.CalledProcessError: Command '('lsb_release', '-a')' returned non-zero exit status 1.

e la stampante non stampa la pagina di prova. La finestra della coda di stampa come "Messaggio di stato" da "Filter failed".

[magozurlinux]

Sembra che non trovi la password per scaricare i plugin.

Prova a dare questo comando connesso ad Internet:

Codice: Seleziona tutto

sudo hp-plugin -i

[Roberto Pontecorvi]

Riprova a dare il comando:

Codice: Seleziona tutto

hp-doctor

e posta il risultato

[campacavallo]

Riprova a dare il comando:

Codice: Seleziona tutto

hp-doctor

e posta il risultato

Da impostazioni di sistema > stampanti pare che la stampante sia installata ma che richieda un plugin proprietario.
Provando a farne il download e l'installazione, non ci si riesce.
Eccolo il risultato di hp-doctor:

Codice: Seleziona tutto

 /usr/share/hplip/check.py:685: SyntaxWarning: "is not" with a literal. Did you mean "!="?
  if 'getfacl' not in g and '' is not g and 'file' not in g:

HP Linux Imaging and Printing System (ver. 3.20.6)
Self Diagnse Utility and Healing Utility ver. 1.0

Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.


HP Linux Imaging and Printing System (ver. 3.20.6)
Self Diagnse Utility and Healing Utility ver. 1.0

Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

 

Checking for Deprecated items....
No Deprecated items are found


Checking for HPLIP updates....

HP Linux Imaging and Printing System (ver. 3.20.6)
HPLIP upgrade latest version ver. 1.0

Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

Latest version of HPLIP is already installed.


Checking for Dependencies....

---------------
| SYSTEM INFO |
---------------

 Kernel: 5.4.0-45-generic #49-Ubuntu SMP Wed Aug 26 13:38:52 UTC 2020 GNU/Linux
 Host: livio-Lenovo
 Proc: 5.4.0-45-generic #49-Ubuntu SMP Wed Aug 26 13:38:52 UTC 2020 GNU/Linux
 Distribution: 12 20.04
 Bitness: 64 bit


-----------------------
| HPLIP CONFIGURATION |
-----------------------

HPLIP-Version: HPLIP 3.20.6
HPLIP-Home: /usr/share/hplip
HPLIP-Installation: Auto installation is supported for ubuntu distro  20.04 version 

Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf.  Generated from hplip.conf.in by configure.

[hplip]
version=3.20.6

[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/hplip/HP
ppdbase=/usr/share/ppd/hplip
doc=/usr/share/doc/hplip-3.20.6
html=/usr/share/doc/hplip-3.20.6
icon=/usr/share/applications
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv/hp
bin=/usr/bin
apparmor=/etc/apparmor.d
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
libusb01-build=no
pp-build=no
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=no
foomatic-drv-install=no
foomatic-ppd-install=no
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.20.6
restricted-build=no
ui-toolkit=qt5
qt3=no
qt4=no
qt5=yes
policy-kit=no
lite-build=no
udev_sysfs_rules=no
hpcups-only-build=no
hpijs-only-build=no
apparmor_build=yes
class-driver=no


Current contents of '/var/lib/hp/hplip.state' file:
Plugins are not installed. Could not access file: No such file or directory

Current contents of '~/.hplip/hplip.conf' file:
[upgrade]
notify_upgrade = true
last_upgraded_time = 1593683524
pending_upgrade_time = 0
latest_available_version = 3.17.10

[installation]
date_time = 09/06/20 09:49:20
version = 3.20.6


 <Package-name>        <Package-Desc>      <Required/Optional> <Min-Version> <Installed-Version> <Status>   <Comment>

-------------------------
| External Dependencies |
-------------------------

 cups                 CUPS - Common Unix Printing System                           REQUIRED        1.1             2.3.1           OK         'CUPS Scheduler is running'
 gs                   GhostScript - PostScript and PDF language interpreter and previewer REQUIRED        7.05            9.50            OK         -
 xsane                xsane - Graphical scanner frontend for SANE                  OPTIONAL        0.9             0.999           OK         -
 scanimage            scanimage - Shell scanning program                           OPTIONAL        1.0             1.0.29          OK         -
 dbus                 DBus - Message bus system                                    REQUIRED        -               1.12.16         OK         -
 policykit            PolicyKit - Administrative policy framework                  OPTIONAL        -               0.105           OK         -
 network              network -wget                                                OPTIONAL        -               1.20.3          OK         -
 avahi-utils          avahi-utils                                                  OPTIONAL        -               0.7             OK         -

------------------------
| General Dependencies |
------------------------

 libjpeg              libjpeg - JPEG library                                       REQUIRED        -               -               OK         -
 cups-devel           CUPS devel- Common Unix Printing System development files    REQUIRED        -               2.3.1           OK         -
 cups-image           CUPS image - CUPS image development files                    REQUIRED        -               2.3.1           OK         -
 libpthread           libpthread - POSIX threads library                           REQUIRED        -               b'2.31'         OK         -
 libusb               libusb - USB library                                         REQUIRED        -               1.0             OK         -
 sane                 SANE - Scanning library                                      REQUIRED        -               -               OK         -
 sane-devel           SANE - Scanning library development files                    REQUIRED        -               -               OK         -
 libnetsnmp-devel     libnetsnmp-devel - SNMP networking library development files REQUIRED        5.0.9           5.8             OK         -
 libcrypto            libcrypto - OpenSSL cryptographic library                    REQUIRED        -               1.1.1           OK         -
 python3X             Python 2.2 or greater - Python programming language          REQUIRED        2.2             3.8.2           OK         -
 python3-notify2      Python libnotify - Python bindings for the libnotify Desktop notifications OPTIONAL        -               -               OK         -
 python3-pyqt5-dbus   PyQt 5 DBus - DBus Support for PyQt5                         OPTIONAL        5.0             5.14.1          OK         -
 python3-pyqt5        PyQt 5- Qt interface for Python (for Qt version 4.x)         REQUIRED        5.0             5.14.1          OK         -
 python3-dbus         Python DBus - Python bindings for DBus                       REQUIRED        0.80.0          1.2.16          OK         -
 python3-xml          Python XML libraries                                         REQUIRED        -               2.2.9           OK         -
 python3-devel        Python devel - Python development files                      REQUIRED        2.2             3.8.2           OK         -
 python3-pil          PIL - Python Imaging Library (required for commandline scanning with hp-scan) OPTIONAL        -               7.0.0           OK         -
 python3-reportlab    Reportlab - PDF library for Python                           OPTIONAL        2.0             3.5.34          OK         -

--------------
| COMPILEDEP |
--------------

 libtool              libtool - Library building support services                  REQUIRED        -               2.4.6           OK         -
 gcc                  gcc - GNU Project C and C++ Compiler                         REQUIRED        -               9.3.0           OK         -
 make                 make - GNU make utility to maintain groups of programs       REQUIRED        3.0             4.2.1           OK         -

---------------------
| Python Extentions |
---------------------

 cupsext              CUPS-Extension                                               REQUIRED        -               3.20.6          OK         -
 hpmudext             IO-Extension                                                 REQUIRED        -               3.20.6          OK         -

----------------------
| Scan Configuration |
----------------------

 hpaio                HPLIP-SANE-Backend                                           REQUIRED        -               3.20.6          OK         'hpaio found in /etc/sane.d/dll.conf'
 scanext              Scan-SANE-Extension                                          REQUIRED        -               3.20.6          OK         -

------------------------------
| DISCOVERED SCANNER DEVICES |
------------------------------

No Scanner found.

--------------------------
| DISCOVERED USB DEVICES |
--------------------------

  Device URI                                Model                                 
  ----------------------------------------  --------------------------------------
  hp:/usb/HP_LaserJet_P1006?serial=AC2BJCR  HP LaserJet P1006                     

---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------

 
HP_LaserJet_P1006
-----------------
Type: Printer
Device URI: hp:/usb/HP_LaserJet_P1006?serial=AC2BJCR
PPD: /etc/cups/ppd/HP_LaserJet_P1006.ppd
PPD Description: HP LaserJet p1006, hpcups 3.20.3, requires proprietary plugin
Printer ready to printmpante HP_LaserJet_P1006 è inattiva.  è stata abilitata da dom 6 set 2020, 09:43:26
Communication status: Good


--------------
| PERMISSION |
--------------

USB             HP_LaserJet_P1006              Required        -        -        OK       Node:'/dev/bus/usb/003/003' Perm:'  root  lp rw- rw- rw- rw- r--'
 

Checking for Configured Queues....
 
Queue(s) configured correctly using HPLIP.


Checking for HP Properitery Plugin's....
No plug-in printers are configured.
 
Diagnose completed...



More information on Troubleshooting,How-To's and Support is available on http://hplipopensource.com/hplip-web/index.html
 

[magozurlinux]

Sembra che non trovi la password per scaricare i plugin.

Prova a dare questo comando connesso ad Internet:

Codice: Seleziona tutto

sudo hp-plugin -i

Quel comando l'hai dato?

[campacavallo]

Sembra che non trovi la password per scaricare i plugin.

Prova a dare questo comando connesso ad Internet:

Codice: Seleziona tutto

sudo hp-plugin -i

Quel comando l'hai dato?

Provato. Purtroppo mi risponde

warning: It is not recommended to run 'hp-plugin' in a root mode.

e poi va in errore. Riporto l'output.

Codice: Seleziona tutto

[sudo] password di livio: 

HP Linux Imaging and Printing System (ver. 3.20.6)
Plugin Download and Install Utility ver. 2.1

Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

warning: It is not recommended to run 'hp-plugin' in a root mode.

HP Linux Imaging and Printing System (ver. 3.20.6)
Plugin Download and Install Utility ver. 2.1

Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

(Note: Defaults for each question are maked with a '*'. Press <enter> to accept the default.)


-----------------------------------------
| PLUG-IN INSTALLATION FOR HPLIP 3.20.6 |
-----------------------------------------

  Option      Description                                       
  ----------  --------------------------------------------------
  d           Download plug-in from HP (recommended)            
  p           Specify a path to the plug-in (advanced)          
  q           Quit hp-plugin (skip installation)                

Enter option (d=download*, p=specify path, q=quit) ? d

-------------------
| DOWNLOAD PLUGIN |
-------------------

Checking for network connection...
Downloading plug-in from: 
Downloading plug-in: [\                                                                                                                                                  ] 0%     Traceback (most recent call last):
  File "/usr/share/hplip/base/password.py", line 85, in get_distro_name
    os_name = platform.dist()[0]
AttributeError: module 'platform' has no attribute 'dist'

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/usr/bin/hp-plugin", line 363, in <module>
    status, plugin_path, error_str = pluginObj.download(plugin_path, plugin_download_callback)
  File "/usr/share/hplip/installer/pluginhandler.py", line 254, in download
    core = core_install.CoreInstall()
  File "/usr/share/hplip/installer/core_install.py", line 240, in __init__
    self.passwordObj = password.Password(ui_mode)
  File "/usr/share/hplip/base/password.py", line 118, in __init__
    self.__readAuthType()  # self.__authType
  File "/usr/share/hplip/base/password.py", line 141, in __readAuthType
    distro_name = get_distro_name().lower().replace(" ","")
  File "/usr/share/hplip/base/password.py", line 88, in get_distro_name
    os_name = distro.linux_distribution()[0]
  File "/usr/lib/python3/dist-packages/distro.py", line 122, in linux_distribution
    return _distro.linux_distribution(full_distribution_name)
  File "/usr/lib/python3/dist-packages/distro.py", line 677, in linux_distribution
    self.version(),
  File "/usr/lib/python3/dist-packages/distro.py", line 737, in version
    self.lsb_release_attr('release'),
  File "/usr/lib/python3/dist-packages/distro.py", line 899, in lsb_release_attr
    return self._lsb_release_info.get(attribute, '')
  File "/usr/lib/python3/dist-packages/distro.py", line 552, in __get__
    ret = obj.__dict__[self._fname] = self._f(obj)
  File "/usr/lib/python3/dist-packages/distro.py", line 1012, in _lsb_release_info
    stdout = subprocess.check_output(cmd, stderr=devnull)
  File "/usr/lib/python3.8/subprocess.py", line 411, in check_output
    return run(*popenargs, stdout=PIPE, timeout=timeout, check=True,
  File "/usr/lib/python3.8/subprocess.py", line 512, in run
    raise CalledProcessError(retcode, process.args,
subprocess.CalledProcessError: Command '('lsb_release', '-a')' returned non-zero exit status 1.
Error in sys.excepthook:
Traceback (most recent call last):
  File "/usr/lib/python3/dist-packages/apport_python_hook.py", line 153, in apport_excepthook
    with os.fdopen(os.open(pr_filename,
PermissionError: [Errno 13] Permission denied: '/var/crash/_usr_share_hplip_plugin.py.0.crash'

Original exception was:
Traceback (most recent call last):
  File "/usr/share/hplip/base/password.py", line 85, in get_distro_name
    os_name = platform.dist()[0]
AttributeError: module 'platform' has no attribute 'dist'

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/usr/bin/hp-plugin", line 363, in <module>
    status, plugin_path, error_str = pluginObj.download(plugin_path, plugin_download_callback)
  File "/usr/share/hplip/installer/pluginhandler.py", line 254, in download
    core = core_install.CoreInstall()
  File "/usr/share/hplip/installer/core_install.py", line 240, in __init__
    self.passwordObj = password.Password(ui_mode)
  File "/usr/share/hplip/base/password.py", line 118, in __init__
    self.__readAuthType()  # self.__authType
  File "/usr/share/hplip/base/password.py", line 141, in __readAuthType
    distro_name = get_distro_name().lower().replace(" ","")
  File "/usr/share/hplip/base/password.py", line 88, in get_distro_name
    os_name = distro.linux_distribution()[0]
  File "/usr/lib/python3/dist-packages/distro.py", line 122, in linux_distribution
    return _distro.linux_distribution(full_distribution_name)
  File "/usr/lib/python3/dist-packages/distro.py", line 677, in linux_distribution
    self.version(),
  File "/usr/lib/python3/dist-packages/distro.py", line 737, in version
    self.lsb_release_attr('release'),
  File "/usr/lib/python3/dist-packages/distro.py", line 899, in lsb_release_attr
    return self._lsb_release_info.get(attribute, '')
  File "/usr/lib/python3/dist-packages/distro.py", line 552, in __get__
    ret = obj.__dict__[self._fname] = self._f(obj)
  File "/usr/lib/python3/dist-packages/distro.py", line 1012, in _lsb_release_info
    stdout = subprocess.check_output(cmd, stderr=devnull)
  File "/usr/lib/python3.8/subprocess.py", line 411, in check_output
    return run(*popenargs, stdout=PIPE, timeout=timeout, check=True,
  File "/usr/lib/python3.8/subprocess.py", line 512, in run
    raise CalledProcessError(retcode, process.args,
subprocess.CalledProcessError: Command '('lsb_release', '-a')' returned non-zero exit status 1.

[Roberto Pontecorvi]

Allora scarica da qui i plugin -> https://www.openprinting.org/download/p ... P/plugins/ -tutti e due i file 3.20.6 (quello .run e quello .run.asc) li metti nella tua home. Poi dai il comando:

Codice: Seleziona tutto

hp-plugin -i

e alla richiesta da dove prendere il file rispondi -> p. E poi posta il risultato del comando hp-doctor.

[campacavallo]

Allora scarica da qui i plugin -> https://www.openprinting.org/download/p ... P/plugins/ -tutti e due i file 3.20.6 (quello .run e quello .run.asc) li metti nella tua home. Poi dai il comando:

Codice: Seleziona tutto

hp-plugin -i

e alla richiesta da dove prendere il file rispondi -> p. E poi posta il risultato del comando hp-doctor.

Fatto. Mi pare che ancora non ci siamo. hp-plugin -i va in errore.
Con hp-doctor ottengo:

Codice: Seleziona tutto

/usr/share/hplip/check.py:685: SyntaxWarning: "is not" with a literal. Did you mean "!="?
  if 'getfacl' not in g and '' is not g and 'file' not in g:

HP Linux Imaging and Printing System (ver. 3.20.6)
Self Diagnse Utility and Healing Utility ver. 1.0

Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.


HP Linux Imaging and Printing System (ver. 3.20.6)
Self Diagnse Utility and Healing Utility ver. 1.0

Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

 

Checking for Deprecated items....
No Deprecated items are found


Checking for HPLIP updates....

HP Linux Imaging and Printing System (ver. 3.20.6)
HPLIP upgrade latest version ver. 1.0

Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

Latest version of HPLIP is already installed.


Checking for Dependencies....

---------------
| SYSTEM INFO |
---------------

 Kernel: 5.4.0-47-generic #51-Ubuntu SMP Fri Sep 4 19:50:52 UTC 2020 GNU/Linux
 Host: livio-Lenovo
 Proc: 5.4.0-47-generic #51-Ubuntu SMP Fri Sep 4 19:50:52 UTC 2020 GNU/Linux
 Distribution: 12 20.04
 Bitness: 64 bit


-----------------------
| HPLIP CONFIGURATION |
-----------------------

HPLIP-Version: HPLIP 3.20.6
HPLIP-Home: /usr/share/hplip
HPLIP-Installation: Auto installation is supported for ubuntu distro  20.04 version 

Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf.  Generated from hplip.conf.in by configure.

[hplip]
version=3.20.6

[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/hplip/HP
ppdbase=/usr/share/ppd/hplip
doc=/usr/share/doc/hplip-3.20.6
html=/usr/share/doc/hplip-3.20.6
icon=/usr/share/applications
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv/hp
bin=/usr/bin
apparmor=/etc/apparmor.d
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
libusb01-build=no
pp-build=no
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=no
foomatic-drv-install=no
foomatic-ppd-install=no
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.20.6
restricted-build=no
ui-toolkit=qt5
qt3=no
qt4=no
qt5=yes
policy-kit=no
lite-build=no
udev_sysfs_rules=no
hpcups-only-build=no
hpijs-only-build=no
apparmor_build=yes
class-driver=no


Current contents of '/var/lib/hp/hplip.state' file:
Plugins are not installed. Could not access file: No such file or directory

Current contents of '~/.hplip/hplip.conf' file:
[upgrade]
notify_upgrade = true
last_upgraded_time = 1593683524
pending_upgrade_time = 0
latest_available_version = 3.17.10

[installation]
date_time = 09/12/20 19:26:43
version = 3.20.6

[last_used]
device_uri = hp:/usb/HP_LaserJet_P1006?serial=AC2BJCR
printer_name = HP_LaserJet_P1006


 <Package-name>        <Package-Desc>      <Required/Optional> <Min-Version> <Installed-Version> <Status>   <Comment>

-------------------------
| External Dependencies |
-------------------------

 cups                 CUPS - Common Unix Printing System                           REQUIRED        1.1             2.3.1           OK         'CUPS Scheduler is running'
 gs                   GhostScript - PostScript and PDF language interpreter and previewer REQUIRED        7.05            9.50            OK         -
 xsane                xsane - Graphical scanner frontend for SANE                  OPTIONAL        0.9             0.999           OK         -
 scanimage            scanimage - Shell scanning program                           OPTIONAL        1.0             1.0.29          OK         -
 dbus                 DBus - Message bus system                                    REQUIRED        -               1.12.16         OK         -
 policykit            PolicyKit - Administrative policy framework                  OPTIONAL        -               0.105           OK         -
 network              network -wget                                                OPTIONAL        -               1.20.3          OK         -
 avahi-utils          avahi-utils                                                  OPTIONAL        -               0.7             OK         -

------------------------
| General Dependencies |
------------------------

 libjpeg              libjpeg - JPEG library                                       REQUIRED        -               -               OK         -
 cups-devel           CUPS devel- Common Unix Printing System development files    REQUIRED        -               2.3.1           OK         -
 cups-image           CUPS image - CUPS image development files                    REQUIRED        -               2.3.1           OK         -
 libpthread           libpthread - POSIX threads library                           REQUIRED        -               b'2.31'         OK         -
 libusb               libusb - USB library                                         REQUIRED        -               1.0             OK         -
 sane                 SANE - Scanning library                                      REQUIRED        -               -               OK         -
 sane-devel           SANE - Scanning library development files                    REQUIRED        -               -               OK         -
 libnetsnmp-devel     libnetsnmp-devel - SNMP networking library development files REQUIRED        5.0.9           5.8             OK         -
 libcrypto            libcrypto - OpenSSL cryptographic library                    REQUIRED        -               1.1.1           OK         -
 python3X             Python 2.2 or greater - Python programming language          REQUIRED        2.2             3.8.2           OK         -
 python3-notify2      Python libnotify - Python bindings for the libnotify Desktop notifications OPTIONAL        -               -               OK         -
 python3-pyqt5-dbus   PyQt 5 DBus - DBus Support for PyQt5                         OPTIONAL        5.0             5.14.1          OK         -
 python3-pyqt5        PyQt 5- Qt interface for Python (for Qt version 4.x)         REQUIRED        5.0             5.14.1          OK         -
 python3-dbus         Python DBus - Python bindings for DBus                       REQUIRED        0.80.0          1.2.16          OK         -
 python3-xml          Python XML libraries                                         REQUIRED        -               2.2.9           OK         -
 python3-devel        Python devel - Python development files                      REQUIRED        2.2             3.8.2           OK         -
 python3-pil          PIL - Python Imaging Library (required for commandline scanning with hp-scan) OPTIONAL        -               7.0.0           OK         -
 python3-reportlab    Reportlab - PDF library for Python                           OPTIONAL        2.0             3.5.34          OK         -

--------------
| COMPILEDEP |
--------------

 libtool              libtool - Library building support services                  REQUIRED        -               2.4.6           OK         -
 gcc                  gcc - GNU Project C and C++ Compiler                         REQUIRED        -               9.3.0           OK         -
 make                 make - GNU make utility to maintain groups of programs       REQUIRED        3.0             4.2.1           OK         -

---------------------
| Python Extentions |
---------------------

 cupsext              CUPS-Extension                                               REQUIRED        -               3.20.6          OK         -
 hpmudext             IO-Extension                                                 REQUIRED        -               3.20.6          OK         -

----------------------
| Scan Configuration |
----------------------

 hpaio                HPLIP-SANE-Backend                                           REQUIRED        -               3.20.6          OK         'hpaio found in /etc/sane.d/dll.conf'
 scanext              Scan-SANE-Extension                                          REQUIRED        -               3.20.6          OK         -

------------------------------
| DISCOVERED SCANNER DEVICES |
------------------------------

No Scanner found.

--------------------------
| DISCOVERED USB DEVICES |
--------------------------

  Device URI                                Model                                 
  ----------------------------------------  --------------------------------------
  hp:/usb/HP_LaserJet_P1006?serial=AC2BJCR  HP LaserJet P1006                     

---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------

 
HP_LaserJet_P1006
-----------------
Type: Printer
Device URI: hp:/usb/HP_LaserJet_P1006?serial=AC2BJCR
PPD: /etc/cups/ppd/HP_LaserJet_P1006.ppd
PPD Description: HP LaserJet p1006, hpcups 3.20.3, requires proprietary plugin
Printer ready to printmpante HP_LaserJet_P1006 è inattiva.  è stata abilitata da sab 12 set 2020, 19:14:18
Communication status: Good


--------------
| PERMISSION |
--------------

USB             HP_LaserJet_P1006              Required        -        -        OK       Node:'/dev/bus/usb/003/003' Perm:'  root  lp rw- rw- rw- rw- r--'
 

Checking for Configured Queues....
 
Queue(s) configured correctly using HPLIP.


Checking for HP Properitery Plugin's....
No plug-in printers are configured.
 
Diagnose completed...



More information on Troubleshooting,How-To's and Support is available on http://hplipopensource.com/hplip-web/index.html

[Roberto Pontecorvi]

Mi pare che ancora non ci siamo. hp-plugin -i va in errore.

quale errore?

[campacavallo]

Mi pare che ancora non ci siamo. hp-plugin -i va in errore.

quale errore?

Riporto l'output

Codice: Seleziona tutto

HP Linux Imaging and Printing System (ver. 3.20.6)
Plugin Download and Install Utility ver. 2.1

Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.


HP Linux Imaging and Printing System (ver. 3.20.6)
Plugin Download and Install Utility ver. 2.1

Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

(Note: Defaults for each question are maked with a '*'. Press <enter> to accept the default.)


-----------------------------------------
| PLUG-IN INSTALLATION FOR HPLIP 3.20.6 |
-----------------------------------------

  Option      Description                                       
  ----------  --------------------------------------------------
  d           Download plug-in from HP (recommended)            
  p           Specify a path to the plug-in (advanced)          
  q           Quit hp-plugin (skip installation)                

Enter option (d=download*, p=specify path, q=quit) ? p
Enter the path to the 'hplip-3.20.6-plugin.run' file (q=quit) : 

---------------
| COPY PLUGIN |
---------------

Downloading plug-in from: file:///home/livio/hplip-3.20.6-plugin.run
Downloading plug-in: [\                                                                                                                                                  ] 0%     Traceback (most recent call last):
  File "/usr/share/hplip/base/password.py", line 85, in get_distro_name
    os_name = platform.dist()[0]
AttributeError: module 'platform' has no attribute 'dist'

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/usr/bin/hp-plugin", line 363, in <module>
    status, plugin_path, error_str = pluginObj.download(plugin_path, plugin_download_callback)
  File "/usr/share/hplip/installer/pluginhandler.py", line 254, in download
    core = core_install.CoreInstall()
  File "/usr/share/hplip/installer/core_install.py", line 240, in __init__
    self.passwordObj = password.Password(ui_mode)
  File "/usr/share/hplip/base/password.py", line 118, in __init__
    self.__readAuthType()  # self.__authType
  File "/usr/share/hplip/base/password.py", line 141, in __readAuthType
    distro_name = get_distro_name().lower().replace(" ","")
  File "/usr/share/hplip/base/password.py", line 88, in get_distro_name
    os_name = distro.linux_distribution()[0]
  File "/usr/lib/python3/dist-packages/distro.py", line 122, in linux_distribution
    return _distro.linux_distribution(full_distribution_name)
  File "/usr/lib/python3/dist-packages/distro.py", line 677, in linux_distribution
    self.version(),
  File "/usr/lib/python3/dist-packages/distro.py", line 737, in version
    self.lsb_release_attr('release'),
  File "/usr/lib/python3/dist-packages/distro.py", line 899, in lsb_release_attr
    return self._lsb_release_info.get(attribute, '')
  File "/usr/lib/python3/dist-packages/distro.py", line 552, in __get__
    ret = obj.__dict__[self._fname] = self._f(obj)
  File "/usr/lib/python3/dist-packages/distro.py", line 1012, in _lsb_release_info
    stdout = subprocess.check_output(cmd, stderr=devnull)
  File "/usr/lib/python3.8/subprocess.py", line 411, in check_output
    return run(*popenargs, stdout=PIPE, timeout=timeout, check=True,
  File "/usr/lib/python3.8/subprocess.py", line 512, in run
    raise CalledProcessError(retcode, process.args,
subprocess.CalledProcessError: Command '('lsb_release', '-a')' returned non-zero exit status 1.
Error in sys.excepthook:
Traceback (most recent call last):
  File "/usr/lib/python3/dist-packages/apport_python_hook.py", line 153, in apport_excepthook
    with os.fdopen(os.open(pr_filename,
PermissionError: [Errno 13] Permission denied: '/var/crash/_usr_share_hplip_plugin.py.1000.crash'

Original exception was:
Traceback (most recent call last):
  File "/usr/share/hplip/base/password.py", line 85, in get_distro_name
    os_name = platform.dist()[0]
AttributeError: module 'platform' has no attribute 'dist'

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/usr/bin/hp-plugin", line 363, in <module>
    status, plugin_path, error_str = pluginObj.download(plugin_path, plugin_download_callback)
  File "/usr/share/hplip/installer/pluginhandler.py", line 254, in download
    core = core_install.CoreInstall()
  File "/usr/share/hplip/installer/core_install.py", line 240, in __init__
    self.passwordObj = password.Password(ui_mode)
  File "/usr/share/hplip/base/password.py", line 118, in __init__
    self.__readAuthType()  # self.__authType
  File "/usr/share/hplip/base/password.py", line 141, in __readAuthType
    distro_name = get_distro_name().lower().replace(" ","")
  File "/usr/share/hplip/base/password.py", line 88, in get_distro_name
    os_name = distro.linux_distribution()[0]
  File "/usr/lib/python3/dist-packages/distro.py", line 122, in linux_distribution
    return _distro.linux_distribution(full_distribution_name)
  File "/usr/lib/python3/dist-packages/distro.py", line 677, in linux_distribution
    self.version(),
  File "/usr/lib/python3/dist-packages/distro.py", line 737, in version
    self.lsb_release_attr('release'),
  File "/usr/lib/python3/dist-packages/distro.py", line 899, in lsb_release_attr
    return self._lsb_release_info.get(attribute, '')
  File "/usr/lib/python3/dist-packages/distro.py", line 552, in __get__
    ret = obj.__dict__[self._fname] = self._f(obj)
  File "/usr/lib/python3/dist-packages/distro.py", line 1012, in _lsb_release_info
    stdout = subprocess.check_output(cmd, stderr=devnull)
  File "/usr/lib/python3.8/subprocess.py", line 411, in check_output
    return run(*popenargs, stdout=PIPE, timeout=timeout, check=True,
  File "/usr/lib/python3.8/subprocess.py", line 512, in run
    raise CalledProcessError(retcode, process.args,
subprocess.CalledProcessError: Command '('lsb_release', '-a')' returned non-zero exit status 1.