Webcam integrata funziona con cheese ma non con Icq

[filippop78]

Salve a tutti.
Ho notato che la webcam integrata nel mio laptop non vuole saperne di partire su ICQ (dice di non trovare nessuna periferica per il video o l'audio) ma se apro cheese funziona.

Se mi date istruzioni interrogo il portatile da terminale

Grazie anticipate a chiunque interverrà

[magozurlinux]

Salve,

da terminale postami questi comandi:

Codice: Seleziona tutto

lsusb

Codice: Seleziona tutto

dmesg | grep usb

Codice: Seleziona tutto

ls -l /dev/video*

Codice: Seleziona tutto

find /usr/lib* -name v4l*

[filippop78]

@magozurlinux

lsusb

Codice: Seleziona tutto

filippo@Hal:~$ lsusb
Bus 001 Device 002: ID 8087:8000 Intel Corp. 
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 005: ID 0bda:b728 Realtek Semiconductor Corp. Bluetooth Radio 
Bus 002 Device 004: ID 04f2:b572 Chicony Electronics Co., Ltd Lenovo EasyCamera
Bus 002 Device 003: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller
Bus 002 Device 002: ID 046d:c52b Logitech, Inc. Unifying Receiver
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

dmesg | grep usb

Codice: Seleziona tutto

dmesg | grep usb
[    0.197186] usbcore: registered new interface driver usbfs
[    0.197186] usbcore: registered new interface driver hub
[    0.197186] usbcore: registered new device driver usb
[    0.249052] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x662 took 18452 usecs
[    0.485055] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[    0.485056] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.485057] usb usb1: Product: EHCI Host Controller
[    0.485059] usb usb1: Manufacturer: Linux 5.4.0-54-generic ehci_hcd
[    0.485060] usb usb1: SerialNumber: 0000:00:1d.0
[    0.486909] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[    0.486910] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.486911] usb usb2: Product: xHCI Host Controller
[    0.486912] usb usb2: Manufacturer: Linux 5.4.0-54-generic xhci-hcd
[    0.486913] usb usb2: SerialNumber: 0000:00:14.0
[    0.491257] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
[    0.491258] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.491260] usb usb3: Product: xHCI Host Controller
[    0.491261] usb usb3: Manufacturer: Linux 5.4.0-54-generic xhci-hcd
[    0.491262] usb usb3: SerialNumber: 0000:00:14.0
[    0.820984] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    0.824985] usb 2-1: new full-speed USB device number 2 using xhci_hcd
[    0.976444] usb 2-1: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=24.11
[    0.976456] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    0.976458] usb 2-1: Product: USB Receiver
[    0.976459] usb 2-1: Manufacturer: Logitech
[    0.977285] usb 1-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.04
[    0.977287] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.104985] usb 2-4: new high-speed USB device number 3 using xhci_hcd
[    1.253541] usb 2-4: New USB device found, idVendor=0bda, idProduct=0129, bcdDevice=39.60
[    1.253543] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.253544] usb 2-4: Product: USB2.0-CRW
[    1.253545] usb 2-4: Manufacturer: Generic
[    1.253546] usb 2-4: SerialNumber: 20100201396000000
[    1.380990] usb 2-6: new high-speed USB device number 4 using xhci_hcd
[    1.553965] usb 2-6: New USB device found, idVendor=04f2, idProduct=b572, bcdDevice=95.60
[    1.553977] usb 2-6: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    1.553978] usb 2-6: Product: Lenovo EasyCamera
[    1.553979] usb 2-6: Manufacturer: Chicony Electronics Co.,Ltd.
[    1.553980] usb 2-6: SerialNumber: 0x0001
[    1.680968] usb 2-7: new full-speed USB device number 5 using xhci_hcd
[    1.830287] usb 2-7: New USB device found, idVendor=0bda, idProduct=b728, bcdDevice= 2.00
[    1.830289] usb 2-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.830291] usb 2-7: Product: Bluetooth Radio 
[    1.830291] usb 2-7: Manufacturer: Realtek 
[    1.830292] usb 2-7: SerialNumber: 00e04c000001
[    1.837453] usbcore: registered new interface driver rtsx_usb
[    1.843579] usbcore: registered new interface driver usbhid
[    1.843580] usbhid: USB HID core driver
[    1.846134] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.0/0003:046D:C52B.0001/input/input6
[    1.905142] hid-generic 0003:046D:C52B.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-1/input0
[    1.905403] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.1/0003:046D:C52B.0002/input/input7
[    1.905573] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.1/0003:046D:C52B.0002/input/input8
[    1.965107] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.1/0003:046D:C52B.0002/input/input9
[    1.965285] hid-generic 0003:046D:C52B.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-1/input1
[    1.965528] hid-generic 0003:046D:C52B.0003: hiddev1,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-1/input2
[    2.121524] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-1/input2
[    2.243061] input: Logitech Unifying Device. Wireless PID:404d Keyboard as /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.2/0003:046D:C52B.0003/0003:046D:404D.0004/input/input11
[    2.243151] input: Logitech Unifying Device. Wireless PID:404d Mouse as /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.2/0003:046D:C52B.0003/0003:046D:404D.0004/input/input12
[    2.243268] input: Logitech Unifying Device. Wireless PID:404d Consumer Control as /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.2/0003:046D:C52B.0003/0003:046D:404D.0004/input/input13
[    2.243335] input: Logitech Unifying Device. Wireless PID:404d System Control as /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.2/0003:046D:C52B.0003/0003:046D:404D.0004/input/input14
[    2.243406] hid-generic 0003:046D:404D.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:404d] on usb-0000:00:14.0-1/input2:1
[    2.422806] input: Logitech K400 Plus as /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.2/0003:046D:C52B.0003/0003:046D:404D.0004/input/input18
[    2.422945] logitech-hidpp-device 0003:046D:404D.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech K400 Plus] on usb-0000:00:14.0-1/input2:1
[   17.294668] input: Lenovo EasyCamera: Lenovo EasyC as /devices/pci0000:00/0000:00:14.0/usb2/2-6/2-6:1.0/input/input22
[   17.294729] usbcore: registered new interface driver uvcvideo
[   18.454251] usbcore: registered new interface driver btusb
[   26.862703] audit: type=1400 audit(1606554324.799:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ippusbxd" pid=743 comm="apparmor_parser"

ls -l /dev/video*

Codice: Seleziona tutto

ls -l /dev/video*
crw-rw----+ 1 root video 81, 0 nov 28 10:05 /dev/video0
crw-rw----+ 1 root video 81, 1 nov 28 10:05 /dev/video1

find /usr/lib* -name v4l*

Codice: Seleziona tutto

find /usr/lib* -name v4l*
/usr/lib/x86_64-linux-gnu/libv4l/v4l2convert.so
/usr/lib/x86_64-linux-gnu/libv4l/v4l1compat.so
/usr/lib/x86_64-linux-gnu/gegl-0.4/v4l.so
/usr/lib/udev/v4l_id
/usr/lib/firmware/v4l-cx231xx-avcore-01.fw
/usr/lib/firmware/v4l-cx23418-dig.fw
/usr/lib/firmware/v4l-cx23418-apu.fw
/usr/lib/firmware/v4l-cx23885-avcore-01.fw
/usr/lib/firmware/v4l-pvrusb2-24xxx-01.fw
/usr/lib/firmware/v4l-pvrusb2-29xxx-01.fw
/usr/lib/firmware/v4l-cx23418-cpu.fw
/usr/lib/firmware/v4l-cx25840.fw
/usr/lib/firmware/v4l-cx2341x-dec.fw
/usr/lib/firmware/v4l-cx2341x-init.mpg
/usr/lib/firmware/v4l-cx2341x-enc.fw
/usr/lib/modules/5.4.0-54-generic/kernel/drivers/media/common/v4l2-tpg
/usr/lib/modules/5.4.0-54-generic/kernel/drivers/media/common/v4l2-tpg/v4l2-tpg.ko
/usr/lib/modules/5.4.0-54-generic/kernel/drivers/media/v4l2-core
/usr/lib/modules/5.4.0-54-generic/kernel/drivers/media/v4l2-core/v4l2-mem2mem.ko
/usr/lib/modules/5.4.0-54-generic/kernel/drivers/media/v4l2-core/v4l2-dv-timings.ko
/usr/lib/modules/5.4.0-54-generic/kernel/drivers/media/v4l2-core/v4l2-flash-led-class.ko
/usr/lib/modules/5.4.0-54-generic/kernel/drivers/media/v4l2-core/v4l2-fwnode.ko
/usr/lib/modules/5.4.0-53-generic/kernel/drivers/media/common/v4l2-tpg
/usr/lib/modules/5.4.0-53-generic/kernel/drivers/media/common/v4l2-tpg/v4l2-tpg.ko
/usr/lib/modules/5.4.0-53-generic/kernel/drivers/media/v4l2-core
/usr/lib/modules/5.4.0-53-generic/kernel/drivers/media/v4l2-core/v4l2-mem2mem.ko
/usr/lib/modules/5.4.0-53-generic/kernel/drivers/media/v4l2-core/v4l2-dv-timings.ko
/usr/lib/modules/5.4.0-53-generic/kernel/drivers/media/v4l2-core/v4l2-flash-led-class.ko
/usr/lib/modules/5.4.0-53-generic/kernel/drivers/media/v4l2-core/v4l2-fwnode.ko

[magozurlinux]

Da terminale, connesso ad Internet dai questi comandi:

Codice: Seleziona tutto

sudo apt update

Codice: Seleziona tutto

sudo apt install libv4l-0:i386 libv4lconvert0:i386

Codice: Seleziona tutto

LD_PRELOAD=/usr/lib/x86_64-linux-gnu/libv4l/v4l1compat.so icq

oppure

Codice: Seleziona tutto

LD_PRELOAD=/usr/lib/x86_64-linux-gnu/libv4l/v4l2convert.so icq

se ancora la webcam non dovesse ancora funzionare, da terminale postami questo comando:

Codice: Seleziona tutto

locate icq

[filippop78]

@magozurlinux

Ho eseguito i vari comandi ma arrivato a:

Codice: Seleziona tutto

LD_PRELOAD=/usr/lib/x86_64-linux-gnu/libv4l/v4l1compat.so icq-im.icq

dove ho dovuto modificare il nome del comando

il risultato è questo:

Codice: Seleziona tutto

/snap/icq-im/64/bin/desktop-launch: line 490: /snap/icq-im/64/flavor-select: No such file or directory

e mi si apre icq. Succede lo stesso se do il comando alternativo che mi hai dato.

Per locate icq ho un piccolo problema, il terminale mi restituisce un numero di righe superiore al numero massimo delle righe visibili a terminale e non so come ovviare

[magozurlinux]

Da terminale dai questo comando:

Codice: Seleziona tutto

locate icq > output.txt

il file lo trovi nella tua Home, se è grosso lo metti come allegato.

[filippop78]

se è grosso lo metti come allegato

51734 righe, lol

non me lo fa allegare, 3 MB gli risultano troppi. Come/dove posto il file?

[magozurlinux]

se è grosso lo metti come allegato

51734 righe, lol

non me lo fa allegare, 3 MB gli risultano troppi. Come/dove posto il file?

Se lo comprimi quanto diventa?

Da terminale postami questi comandi:

Codice: Seleziona tutto

locate /bin/icq

Codice: Seleziona tutto

locate /usr/sbin/icq

[filippop78]

Se lo comprimi quanto diventa?

ok, sono troppo distratto. Disgraziatamente mi ritorna lo stesso errore, file troppo grande ma è solo 242 kB

Da terminale postami questi comandi:

Codice: Seleziona tutto

locate /bin/icq

Codice: Seleziona tutto

filippo@Hal:~$ locate /bin/icq
/snap/bin/icq-im.icq
/snap/icq-im/63/usr/bin/icq
/snap/icq-im/64/usr/bin/icq

Codice: Seleziona tutto

locate /usr/sbin/icq

questo non restituisce nulla

[magozurlinux]

Da terminale prova questi:

Codice: Seleziona tutto

LD_PRELOAD=/usr/lib/x86_64-linux-gnu/libv4l/v4l1compat.so /snap/bin/icq-im.icq

Codice: Seleziona tutto

LD_PRELOAD=/usr/lib/x86_64-linux-gnu/libv4l/v4l2convert.so /snap/bin/icq-im.icq

[filippop78]

Da terminale prova questi:

Codice: Seleziona tutto

LD_PRELOAD=/usr/lib/x86_64-linux-gnu/libv4l/v4l1compat.so /snap/bin/icq-im.icq

Codice: Seleziona tutto

LD_PRELOAD=/usr/lib/x86_64-linux-gnu/libv4l/v4l2convert.so /snap/bin/icq-im.icq

ho dato il primo comando, si è avviato ICQ ed ho provato a fare una videochiamata

Codice: Seleziona tutto

filippo@Hal:~$ LD_PRELOAD=/usr/lib/x86_64-linux-gnu/libv4l/v4l1compat.so /snap/bin/icq-im.icq
/snap/icq-im/64/bin/desktop-launch: line 490: /snap/icq-im/64/flavor-select: No such file or directory
shm_open() failed: Permission denied
Invalid return value 0 for stream protocol
Invalid return value 0 for stream protocol
Invalid return value 0 for stream protocol
Invalid return value 0 for stream protocol
Invalid return value 0 for stream protocol
Invalid return value 0 for stream protocol
Invalid return value 0 for stream protocol
Invalid return value 0 for stream protocol
Invalid return value 0 for stream protocol
Invalid return value 0 for stream protocol
Invalid return value 0 for stream protocol
Invalid return value 0 for stream protocol
Invalid return value 0 for stream protocol
Invalid return value 0 for stream protocol
Invalid return value 0 for stream protocol
Invalid return value 0 for stream protocol
Invalid return value 0 for stream protocol
Invalid return value 0 for stream protocol
Invalid return value 0 for stream protocol
Invalid return value 0 for stream protocol
Invalid return value 0 for stream protocol
Invalid return value 0 for stream protocol
Invalid return value 0 for stream protocol
Invalid return value 0 for stream protocol
Invalid return value 0 for stream protocol
shm_open() failed: Permission denied

come prima ma col secondo comando

Codice: Seleziona tutto

filippo@Hal:~$ LD_PRELOAD=/usr/lib/x86_64-linux-gnu/libv4l/v4l2convert.so /snap/bin/icq-im.icq
/snap/icq-im/64/bin/desktop-launch: line 490: /snap/icq-im/64/flavor-select: No such file or directory
shm_open() failed: Permission denied
Invalid return value 0 for stream protocol
Invalid return value 0 for stream protocol
Invalid return value 0 for stream protocol
Invalid return value 0 for stream protocol
Invalid return value 0 for stream protocol
Invalid return value 0 for stream protocol
Invalid return value 0 for stream protocol
Invalid return value 0 for stream protocol
Invalid return value 0 for stream protocol
Invalid return value 0 for stream protocol
Invalid return value 0 for stream protocol
Invalid return value 0 for stream protocol
Invalid return value 0 for stream protocol
Invalid return value 0 for stream protocol
Invalid return value 0 for stream protocol
Invalid return value 0 for stream protocol
Invalid return value 0 for stream protocol
Invalid return value 0 for stream protocol
Invalid return value 0 for stream protocol
Invalid return value 0 for stream protocol
Invalid return value 0 for stream protocol
Invalid return value 0 for stream protocol
Invalid return value 0 for stream protocol
Invalid return value 0 for stream protocol
Invalid return value 0 for stream protocol
shm_open() failed: Permission denied

[magozurlinux]

Da terminale postami questo comando:

Codice: Seleziona tutto

locate flavor-select

[filippop78]

Da terminale postami questo comando:

Codice: Seleziona tutto

locate flavor-select

Codice: Seleziona tutto

filippo@Hal:~$ locate flavor-select
/snap/chromium/1399/flavor-select
/snap/chromium/1411/flavor-select

[magozurlinux]

Da terminale postami questi comandi:

Codice: Seleziona tutto

cat /snap/chromium/1399/flavor-select

Codice: Seleziona tutto

sudo snap info riseup-vpn

[filippop78]

Da terminale postami questi comandi:

Codice: Seleziona tutto

cat /snap/chromium/1399/flavor-select

Codice: Seleziona tutto

filippo@Hal:~$ cat /snap/chromium/1399/flavor-select
USE_gtk3=true

Codice: Seleziona tutto

sudo snap info riseup-vpn

Codice: Seleziona tutto

filippo@Hal:~$ sudo snap info riseup-vpn
[sudo] password di filippo: 
name:      riseup-vpn
summary:   RiseupVPN, anonymous VPN. Powered by Bitmask.
publisher: LEAP Encryption Access Project (leapsnaps)
store-url: https://snapcraft.io/riseup-vpn
contact:   https://0xacab.org/leap/bitmask-vpn
license:   GPL-3.0+
description: |
  RiseupVPN is an easy, fast, and secure VPN service from riseup.net.
  RiseupVPN does not require a user account, keep logs, or track you in any
  way. The service is paid for entirely by donations from users like you.
snap-id: kcdab1evtjtNRe7Mrm0Qd57fioCuDBUV
channels:
  latest/stable:    0.20.4              2020-06-18 (161)  45MB classic
  latest/candidate: 0.20.4              2020-05-07 (161)  45MB classic
  latest/beta:      0.20.4-156-gd563efd 2020-11-03 (164) 130MB classic
  latest/edge:      0.20.4-156-gd563efd 2020-11-03 (164) 130MB classic

[magozurlinux]

Da terminale postami questo comando:

Codice: Seleziona tutto

ls -l /snap/icq-im/64/

[filippop78]

Da terminale postami questo comando:

Codice: Seleziona tutto

ls -l /snap/icq-im/64/

Codice: Seleziona tutto

filippo@Hal:~$ ls -l /snap/icq-im/64/
totale 1
drwxr-xr-x  2 root root  73 nov 24 10:03 bin
-rwxr-xr-x  1 root root 419 nov 24 10:03 command-icq.wrapper
drwxr-xr-x 19 root root 338 nov 24 10:02 etc
drwxr-xr-x  5 root root  66 mar 24  2020 lib
drwxr-xr-x  4 root root  68 nov 24 10:03 meta
drwxr-xr-x  4 root root  41 nov 24 10:03 snap
drwxrwxr-x  7 root root 101 nov 23 17:45 usr
drwxr-xr-x  3 root root  26 giu 11 22:06 var

[magozurlinux]

Da terminale dai questi comandi:

Codice: Seleziona tutto

echo USE_gtk3=true | sudo tee /snap/icq-im/64/flavor-select

Riavvia il pc.

Riavviato Ubuntu:

Codice: Seleziona tutto

sudo -s

Codice: Seleziona tutto

LD_PRELOAD=/usr/lib/x86_64-linux-gnu/libv4l/v4l2convert.so /snap/bin/icq-im.icq

oppure

Codice: Seleziona tutto

LD_PRELOAD=/usr/lib/x86_64-linux-gnu/libv4l/v4l1compat.so /snap/bin/icq-im.icq

[filippop78]

Dopo aver eseguito i primi tuoi passaggi:

Riavviato Ubuntu:

Codice: Seleziona tutto

sudo -s

Codice: Seleziona tutto

LD_PRELOAD=/usr/lib/x86_64-linux-gnu/libv4l/v4l2convert.so /snap/bin/icq-im.icq

vedi file allegato

file1.txt

(21.42 KiB) Scaricato 14 volte

oppure

Codice: Seleziona tutto

LD_PRELOAD=/usr/lib/x86_64-linux-gnu/libv4l/v4l1compat.so /snap/bin/icq-im.icq

vedi file allegato

file2.txt

(19.92 KiB) Scaricato 13 volte

[magozurlinux]

Di male in peggio!

La webcam l'hai provata con guvcview o vlc?