[risolto]installare scanner BROTHER MFC-J265W

[criceto45]

ragazzi ho seguito le guide di un link tedesco,https://forum.ubuntuusers.de/topic/brot ... tallieren/ ho messo tutti si.la stampante va lo scanner no.la stampante e collegata con usb .grazie del'aiuto


mi trovo 5 stampanti quale elimino?grazie mi dice scanner non rilevato

[magozurlinux]

Ciao.

Da terminale postami questi comandi:

Codice: Seleziona tutto

lsusb

Codice: Seleziona tutto

dmesg | grep usb

Codice: Seleziona tutto

dpkg -l | grep Brother

Codice: Seleziona tutto

sudo scanimage -L

Codice: Seleziona tutto

sudo sane-find-scanner

[criceto45]

Codice: Seleziona tutto

giuseppe@giuseppe-Aspire-7738:~$ lsusb
Bus 002 Device 003: ID 064e:a117 Suyin Corp. HD Video WebCam
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 002: ID 093a:2510 Pixart Imaging, Inc. Optical Mouse
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 004: ID 18d1:4ee7 Google Inc. MI 8 Lite
Bus 001 Device 002: ID 1c7a:0801 LighTuning Technology Inc. Fingerprint Reader
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
giuseppe@giuseppe-Aspire-7738:~$ dmesg | grep usb
[    1.218359] usbcore: registered new interface driver usbfs
[    1.218359] usbcore: registered new interface driver hub
[    1.218359] usbcore: registered new device driver usb
[    2.102150] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[    2.102153] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.102156] usb usb1: Product: EHCI Host Controller
[    2.102158] usb usb1: Manufacturer: Linux 5.4.0-59-generic ehci_hcd
[    2.102160] usb usb1: SerialNumber: 0000:00:1a.7
[    2.122076] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[    2.122079] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.122081] usb usb2: Product: EHCI Host Controller
[    2.122084] usb usb2: Manufacturer: Linux 5.4.0-59-generic ehci_hcd
[    2.122086] usb usb2: SerialNumber: 0000:00:1d.7
[    2.122855] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04
[    2.122857] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.122859] usb usb3: Product: UHCI Host Controller
[    2.122861] usb usb3: Manufacturer: Linux 5.4.0-59-generic uhci_hcd
[    2.122862] usb usb3: SerialNumber: 0000:00:1a.0
[    2.123441] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04
[    2.123443] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.123444] usb usb4: Product: UHCI Host Controller
[    2.123446] usb usb4: Manufacturer: Linux 5.4.0-59-generic uhci_hcd
[    2.123448] usb usb4: SerialNumber: 0000:00:1a.1
[    2.124004] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04
[    2.124006] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.124007] usb usb5: Product: UHCI Host Controller
[    2.124009] usb usb5: Manufacturer: Linux 5.4.0-59-generic uhci_hcd
[    2.124010] usb usb5: SerialNumber: 0000:00:1d.0
[    2.124576] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04
[    2.124578] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.124579] usb usb6: Product: UHCI Host Controller
[    2.124581] usb usb6: Manufacturer: Linux 5.4.0-59-generic uhci_hcd
[    2.124583] usb usb6: SerialNumber: 0000:00:1d.1
[    2.125162] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04
[    2.125164] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.125166] usb usb7: Product: UHCI Host Controller
[    2.125167] usb usb7: Manufacturer: Linux 5.4.0-59-generic uhci_hcd
[    2.125169] usb usb7: SerialNumber: 0000:00:1d.2
[    2.125734] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04
[    2.125736] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.125738] usb usb8: Product: UHCI Host Controller
[    2.125739] usb usb8: Manufacturer: Linux 5.4.0-59-generic uhci_hcd
[    2.125741] usb usb8: SerialNumber: 0000:00:1d.3
[    2.437988] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    2.602004] usb 6-1: new low-speed USB device number 2 using uhci_hcd
[    2.607175] usb 1-1: New USB device found, idVendor=1c7a, idProduct=0801, bcdDevice= 1.00
[    2.607178] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.607181] usb 1-1: Product: FingerPrinter Reader
[    2.607183] usb 1-1: Manufacturer: Generic
[    2.607185] usb 1-1: SerialNumber: 00000000000006
[    2.738015] usb 1-4: new high-speed USB device number 3 using ehci-pci
[    2.801028] usb 6-1: New USB device found, idVendor=093a, idProduct=2510, bcdDevice= 1.00
[    2.801031] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.801034] usb 6-1: Product: USB Optical Mouse
[    2.801036] usb 6-1: Manufacturer: PixArt
[    2.827361] usbcore: registered new interface driver usbhid
[    2.827362] usbhid: USB HID core driver
[    2.832861] input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1:1.0/0003:093A:2510.0001/input/input7
[    2.833106] hid-generic 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:1d.1-1/input0
[    2.900640] usb 1-4: New USB device found, idVendor=18d1, idProduct=4ee7, bcdDevice= 4.04
[    2.900644] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.900646] usb 1-4: Product: MI 8 Lite
[    2.900648] usb 1-4: Manufacturer: Xiaomi
[    2.900651] usb 1-4: SerialNumber: 6242e16f
[    3.234005] usb 2-5: new high-speed USB device number 3 using ehci-pci
[    3.468413] usb 2-5: New USB device found, idVendor=064e, idProduct=a117, bcdDevice= 6.00
[    3.468421] usb 2-5: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[    3.468423] usb 2-5: Product: HD Video WebCam
[    3.468424] usb 2-5: Manufacturer: SuYin
[    3.468426] usb 2-5: SerialNumber: CN1014-S36B-OV011-VA-R06.00.00
[   20.855046] input: HD Video WebCam: HD Video WebCa as /devices/pci0000:00/0000:00:1d.7/usb2/2-5/2-5:1.0/input/input8
[   20.855159] usbcore: registered new interface driver uvcvideo
[   27.727281] audit: type=1400 audit(1621337751.056:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ippusbxd" pid=619 comm="apparmor_parser"
[  676.864807] usb 1-4: USB disconnect, device number 3
[ 8259.622072] usb 1-4: new high-speed USB device number 4 using ehci-pci
[ 8259.780135] usb 1-4: New USB device found, idVendor=18d1, idProduct=4ee7, bcdDevice= 4.04
[ 8259.780138] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 8259.780140] usb 1-4: Product: MI 8 Lite
[ 8259.780143] usb 1-4: Manufacturer: Xiaomi
[ 8259.780145] usb 1-4: SerialNumber: 6242e16f
giuseppe@giuseppe-Aspire-7738:~$ dpkg -l | grep Brother
ii  brgenml1cupswrapper:i386                   3.1.0-1                                              i386         Brother BrGenML1 CUPS wrapper driver
ii  brgenml1lpr:i386                           3.1.0-1                                              i386         Brother BrGenML1 LPR driver
ii  brmfcfaxdrv:i386                           2.0.1-1                                              i386         Brother Fax share driver
ii  brmfcfaxlpd:i386                           1.0.0-2                                              i386         Brother MFC-FAX LPD driver
ii  brother-udev-rule-type1                    1.0.2                                                all          Brother udev rule type 1
ii  brscan-skey                                0.3.1-2                                              amd64        Brother Linux scanner S-KEY tool
ii  brscan3                                    0.2.13-1                                             amd64        Brother Scanner Driver
ii  brscan4                                    0.4.10-1                                             amd64        Brother Scanner Driver
ii  mfc5490cncupswrapper:i386                  1.1.2-2                                              i386         Brother CUPS Inkjet Printer Definitions
ii  mfc5490cnlpr:i386                          1.1.2-2                                              i386         Brother lpr Inkjet Printer Definitions
ii  mfc5890cnlpr:i386                          1.1.2-2                                              i386         Brother lpr Inkjet Printer Definitions
ii  mfcj265wcupswrapper:i386                   1.1.3-1                                              i386         Brother CUPS Inkjet Printer Definitions
ii  mfcj265wlpr:i386                           1.1.3-1                                              i386         Brother lpr Inkjet Printer Definitions
giuseppe@giuseppe-Aspire-7738:~$ sudo scanimage -L
[sudo] password di giuseppe: 
device `brother3:net1;dev0' is a Brother MFC-J265W MFC-J265W
giuseppe@giuseppe-Aspire-7738:~$ sudo sane-find-scanner

  # sane-find-scanner will now attempt to detect your scanner. If the
  # result is different from what you expected, first make sure your
  # scanner is powered up and properly connected to your computer.

  # No SCSI scanners found. If you expected something different, make sure that
  # you have loaded a kernel SCSI driver for your SCSI adapter.

could not fetch string descriptor: Pipe error
could not fetch string descriptor: Pipe error
could not fetch string descriptor: Pipe error
could not fetch string descriptor: Pipe error
found USB scanner (vendor=0x18d1, product=0x4ee7) at libusb:001:004
found USB scanner (vendor=0x1c7a [Generic], product=0x0801 [FingerPrinter Reader]) at libusb:001:002
  # Your USB scanner was (probably) detected. It may or may not be supported by
  # SANE. Try scanimage -L and read the backend's manpage.

  # Not checking for parallel port scanners.

  # Most Scanners connected to the parallel port or other proprietary ports
  # can't be detected by this program.
 

grazie

[criceto45]

Codice: Seleziona tutto

giuseppe@giuseppe-Aspire-7738:~$ lsusb
Bus 002 Device 003: ID 064e:a117 Suyin Corp. HD Video WebCam
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 002: ID 093a:2510 Pixart Imaging, Inc. Optical Mouse
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 004: ID 18d1:4ee7 Google Inc. MI 8 Lite
Bus 001 Device 002: ID 1c7a:0801 LighTuning Technology Inc. Fingerprint Reader
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
giuseppe@giuseppe-Aspire-7738:~$ dmesg | grep usb
[    1.218359] usbcore: registered new interface driver usbfs
[    1.218359] usbcore: registered new interface driver hub
[    1.218359] usbcore: registered new device driver usb
[    2.102150] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[    2.102153] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.102156] usb usb1: Product: EHCI Host Controller
[    2.102158] usb usb1: Manufacturer: Linux 5.4.0-59-generic ehci_hcd
[    2.102160] usb usb1: SerialNumber: 0000:00:1a.7
[    2.122076] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[    2.122079] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.122081] usb usb2: Product: EHCI Host Controller
[    2.122084] usb usb2: Manufacturer: Linux 5.4.0-59-generic ehci_hcd
[    2.122086] usb usb2: SerialNumber: 0000:00:1d.7
[    2.122855] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04
[    2.122857] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.122859] usb usb3: Product: UHCI Host Controller
[    2.122861] usb usb3: Manufacturer: Linux 5.4.0-59-generic uhci_hcd
[    2.122862] usb usb3: SerialNumber: 0000:00:1a.0
[    2.123441] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04
[    2.123443] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.123444] usb usb4: Product: UHCI Host Controller
[    2.123446] usb usb4: Manufacturer: Linux 5.4.0-59-generic uhci_hcd
[    2.123448] usb usb4: SerialNumber: 0000:00:1a.1
[    2.124004] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04
[    2.124006] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.124007] usb usb5: Product: UHCI Host Controller
[    2.124009] usb usb5: Manufacturer: Linux 5.4.0-59-generic uhci_hcd
[    2.124010] usb usb5: SerialNumber: 0000:00:1d.0
[    2.124576] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04
[    2.124578] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.124579] usb usb6: Product: UHCI Host Controller
[    2.124581] usb usb6: Manufacturer: Linux 5.4.0-59-generic uhci_hcd
[    2.124583] usb usb6: SerialNumber: 0000:00:1d.1
[    2.125162] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04
[    2.125164] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.125166] usb usb7: Product: UHCI Host Controller
[    2.125167] usb usb7: Manufacturer: Linux 5.4.0-59-generic uhci_hcd
[    2.125169] usb usb7: SerialNumber: 0000:00:1d.2
[    2.125734] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04
[    2.125736] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.125738] usb usb8: Product: UHCI Host Controller
[    2.125739] usb usb8: Manufacturer: Linux 5.4.0-59-generic uhci_hcd
[    2.125741] usb usb8: SerialNumber: 0000:00:1d.3
[    2.437988] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    2.602004] usb 6-1: new low-speed USB device number 2 using uhci_hcd
[    2.607175] usb 1-1: New USB device found, idVendor=1c7a, idProduct=0801, bcdDevice= 1.00
[    2.607178] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.607181] usb 1-1: Product: FingerPrinter Reader
[    2.607183] usb 1-1: Manufacturer: Generic
[    2.607185] usb 1-1: SerialNumber: 00000000000006
[    2.738015] usb 1-4: new high-speed USB device number 3 using ehci-pci
[    2.801028] usb 6-1: New USB device found, idVendor=093a, idProduct=2510, bcdDevice= 1.00
[    2.801031] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.801034] usb 6-1: Product: USB Optical Mouse
[    2.801036] usb 6-1: Manufacturer: PixArt
[    2.827361] usbcore: registered new interface driver usbhid
[    2.827362] usbhid: USB HID core driver
[    2.832861] input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1:1.0/0003:093A:2510.0001/input/input7
[    2.833106] hid-generic 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:1d.1-1/input0
[    2.900640] usb 1-4: New USB device found, idVendor=18d1, idProduct=4ee7, bcdDevice= 4.04
[    2.900644] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.900646] usb 1-4: Product: MI 8 Lite
[    2.900648] usb 1-4: Manufacturer: Xiaomi
[    2.900651] usb 1-4: SerialNumber: 6242e16f
[    3.234005] usb 2-5: new high-speed USB device number 3 using ehci-pci
[    3.468413] usb 2-5: New USB device found, idVendor=064e, idProduct=a117, bcdDevice= 6.00
[    3.468421] usb 2-5: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[    3.468423] usb 2-5: Product: HD Video WebCam
[    3.468424] usb 2-5: Manufacturer: SuYin
[    3.468426] usb 2-5: SerialNumber: CN1014-S36B-OV011-VA-R06.00.00
[   20.855046] input: HD Video WebCam: HD Video WebCa as /devices/pci0000:00/0000:00:1d.7/usb2/2-5/2-5:1.0/input/input8
[   20.855159] usbcore: registered new interface driver uvcvideo
[   27.727281] audit: type=1400 audit(1621337751.056:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ippusbxd" pid=619 comm="apparmor_parser"
[  676.864807] usb 1-4: USB disconnect, device number 3
[ 8259.622072] usb 1-4: new high-speed USB device number 4 using ehci-pci
[ 8259.780135] usb 1-4: New USB device found, idVendor=18d1, idProduct=4ee7, bcdDevice= 4.04
[ 8259.780138] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 8259.780140] usb 1-4: Product: MI 8 Lite
[ 8259.780143] usb 1-4: Manufacturer: Xiaomi
[ 8259.780145] usb 1-4: SerialNumber: 6242e16f
giuseppe@giuseppe-Aspire-7738:~$ dpkg -l | grep Brother
ii  brgenml1cupswrapper:i386                   3.1.0-1                                              i386         Brother BrGenML1 CUPS wrapper driver
ii  brgenml1lpr:i386                           3.1.0-1                                              i386         Brother BrGenML1 LPR driver
ii  brmfcfaxdrv:i386                           2.0.1-1                                              i386         Brother Fax share driver
ii  brmfcfaxlpd:i386                           1.0.0-2                                              i386         Brother MFC-FAX LPD driver
ii  brother-udev-rule-type1                    1.0.2                                                all          Brother udev rule type 1
ii  brscan-skey                                0.3.1-2                                              amd64        Brother Linux scanner S-KEY tool
ii  brscan3                                    0.2.13-1                                             amd64        Brother Scanner Driver
ii  brscan4                                    0.4.10-1                                             amd64        Brother Scanner Driver
ii  mfc5490cncupswrapper:i386                  1.1.2-2                                              i386         Brother CUPS Inkjet Printer Definitions
ii  mfc5490cnlpr:i386                          1.1.2-2                                              i386         Brother lpr Inkjet Printer Definitions
ii  mfc5890cnlpr:i386                          1.1.2-2                                              i386         Brother lpr Inkjet Printer Definitions
ii  mfcj265wcupswrapper:i386                   1.1.3-1                                              i386         Brother CUPS Inkjet Printer Definitions
ii  mfcj265wlpr:i386                           1.1.3-1                                              i386         Brother lpr Inkjet Printer Definitions
giuseppe@giuseppe-Aspire-7738:~$ sudo scanimage -L
[sudo] password di giuseppe: 
device `brother3:net1;dev0' is a Brother MFC-J265W MFC-J265W
giuseppe@giuseppe-Aspire-7738:~$ sudo sane-find-scanner

  # sane-find-scanner will now attempt to detect your scanner. If the
  # result is different from what you expected, first make sure your
  # scanner is powered up and properly connected to your computer.

  # No SCSI scanners found. If you expected something different, make sure that
  # you have loaded a kernel SCSI driver for your SCSI adapter.

could not fetch string descriptor: Pipe error
could not fetch string descriptor: Pipe error
could not fetch string descriptor: Pipe error
could not fetch string descriptor: Pipe error
found USB scanner (vendor=0x18d1, product=0x4ee7) at libusb:001:004
found USB scanner (vendor=0x1c7a [Generic], product=0x0801 [FingerPrinter Reader]) at libusb:001:002
  # Your USB scanner was (probably) detected. It may or may not be supported by
  # SANE. Try scanimage -L and read the backend's manpage.

  # Not checking for parallel port scanners.

  # Most Scanners connected to the parallel port or other proprietary ports
  # can't be detected by this program.
 

grazie.lo scanner la vede ma non scanerizza

[magozurlinux]

Da terminale postami questi comandi con la multifunzione Brother accesa:

Codice: Seleziona tutto

brscan-skey -l

Codice: Seleziona tutto

brsaneconfig3 -q

[criceto45]

Codice: Seleziona tutto

giuseppe@giuseppe-Aspire-7738:~$ brscan-skey -l

 MFC-J265W         : brother3:net1;dev0  : 192.168.178.24       Not responded
giuseppe@giuseppe-Aspire-7738:~$ brsaneconfig3 -q
  0 "DCP-195C"
  1 "DCP-365CN"
  2 "DCP-375CW"
  3 "DCP-395CN"
  4 "MFC-295CN"
  5 "MFC-495CW"
  6 "MFC-795CW"
  7 "MFC-255CW"
  8 "DCP-390CN"
  9 "DCP-595CN"
 10 "MFC-495CN"
 11 "MFC-675CD"
 12 "MFC-695CDN"
 13 "MFC-735CD"
 14 "MFC-935CDN"
 15 "DCP-8070D"
 16 "MFC-8370DN"
 17 "MFC-8380DN"
 18 "MFC-8680DN"
 19 "MFC-8880DN"
 20 "MFC-9120CN"
 21 "MFC-9320CW"
 22 "MFC-9010CN"
 23 "DCP-9010CN"
 24 "DCP-197C"
 25 "DCP-377CW"
 26 "MFC-257CW"
 27 "DCP-9040CN"
 28 "MFC-9440CN"
 29 "DCP-9045CDN"
 30 "MFC-9840CDW"
 31 "MFC-9640CW"
 32 "MFC-9450CDN"
 33 "DCP-9042CDN"
 34 "DCP-J715W"
 35 "MFC-J615W"
 36 "DCP-J315W"
 37 "MFC-J265W"
 38 "MFC-J630W"
 39 "DCP-J715N"
 40 "MFC-J615N"
 41 "DCP-J515N"
 42 "MFC-J950DN"
 43 "MFC-J700D"
 44 "MFC-J800D"
 45 "MFC-J850DN"
 46 "MFC-J410W"
 47 "MFC-J270W"
 48 "MFC-J855DN"
 49 "MFC-J805D"
 50 "DCP-373CW"
 51 "MFC-253CW"
 52 "DCP-J125"
 53 "DCP-J515W"
 54 "MFC-J220"
 55 "MFC-J410"
 56 "MFC-J415W"
 57 "MFC-5895CW"
 58 "DCP-145C"
 59 "DCP-165C"
 60 "DCP-185C"
 61 "DCP-385C"
 62 "DCP-585CW"
 63 "DCP-535CN"
 64 "MFC-250C"
 65 "MFC-290C"
 66 "MFC-490CW"
 67 "MFC-490CN"
 68 "MFC-790CW"
 69 "MFC-990CW"
 70 "MFC-670CD"
 71 "MFC-930CDN"
 72 "MFC-5490CN"
 73 "MFC-5890CN"
 74 "DCP-6690CW"
 75 "MFC-6490CW"
 76 "MFC-6490CN"
 77 "MFC-6890CDW"
 78 "MFC-6890CN"
 79 "DCP-163C"
 80 "DCP-167C"
 81 "DCP-383C"
 82 "DCP-387C"
 83 "MFC-297C"
 84 "MFC-7450"
 85 "MFC-7840N"
 86 "MFC-7320"
 87 "DCP-7030"
 88 "DCP-7040"
 89 "DCP-7045N"
 90 "MFC-7340"
 91 "MFC-7440N"
 92 "MFC-7840W"
 93 
 94 "DCP-8080DN"
 95 "DCP-8085DN"
 96 "MFC-8480DN"
 97 "MFC-8890DW"

Devices on network
  0 MFC-J265W           "MFC-J265W"         I:192.168.178.030
giuseppe@giuseppe-Aspire-7738:~$ 

MFC-J265W : brother3:net1;dev0 : 192.168.178.24 Not responded. questo e' l'ip della mfc 5490 cn.lo devo cancellare?

[ivantu]

il sistema installato ha librerie 32 bit?
quale versione di *Ubuntu hai installato?

posta qui l'output dei comandi da terminale,

Codice: Seleziona tutto

groups && groups $USER

Codice: Seleziona tutto

lpstat -a

Codice: Seleziona tutto

cat -n /var/log/cups/error_log

posta qui l'output aprendo da terminale l'applicazione

Codice: Seleziona tutto

simple-scan

oppure se è installato

Codice: Seleziona tutto

xsane

[criceto45]

ciao,si le librerie 32 bit sono installate,ubuntu 20.04

Codice: Seleziona tutto

iuseppe@giuseppe-Aspire-7738:~$ groups && groups $USER
giuseppe adm lp cdrom sudo dip plugdev lpadmin lxd sambashare
giuseppe : giuseppe adm lp cdrom sudo dip plugdev lpadmin lxd sambashare
giuseppe@giuseppe-Aspire-7738:~$ lpstat -a
BRFAX sta accettando richieste da lun 17 mag 2021, 23:15:40
Brother_MFC-J265W sta accettando richieste da gio 20 mag 2021, 11:31:21
MFCJ265W sta accettando richieste da gio 20 mag 2021, 09:52:40
giuseppe@giuseppe-Aspire-7738:~$ cat -n /var/log/cups/error_log
     1	W [20/May/2021:08:31:23 +0200] [Job 189] Grayscale/monochrome printing requested for this job but Poppler is not able to convert to grayscale/monochrome PostScript.
     2	W [20/May/2021:08:31:23 +0200] [Job 189] Use \"pdftops-renderer\" option (see cups-filters README file) to use Ghostscript or MuPDF for the PDF -> PostScript conversion.
     3	W [20/May/2021:11:31:26 +0200] [Job 189] Grayscale/monochrome printing requested for this job but Poppler is not able to convert to grayscale/monochrome PostScript.
     4	W [20/May/2021:11:31:26 +0200] [Job 189] Use \"pdftops-renderer\" option (see cups-filters README file) to use Ghostscript or MuPDF for the PDF -> PostScript conversion.
giuseppe@giuseppe-Aspire-7738:~$ simple-scan
Errore di segmentazione (core dump creato)
giuseppe@giuseppe-Aspire-7738:~$ xsane
Gtk-Message: 12:28:40.843: Failed to load module "canberra-gtk-module"
giuseppe@giuseppe-Aspire-7738:~$ 

 

ho installato canberra-gtk-module,non cambia niente.non va.lo vede ma non acquisisce

[ivantu]

posta qui l'output con l'opzione

Codice: Seleziona tutto

simple-scan -d

[criceto45]

eccolo

Codice: Seleziona tutto

giuseppe@giuseppe-Aspire-7738:~$ simple-scan -d
[+0,02s] DEBUG: simple-scan.vala:1720: Starting simple-scan 3.36.3, PID=3986
[+0,02s] DEBUG: unsetenv() is not thread-safe and should not be used after threads are created
[+0,05s] DEBUG: _g_io_module_get_default: Found default implementation dconf (DConfSettingsBackend) for ‘gsettings-backend’
[+0,13s] DEBUG: app-window.vala:1906: Loading state from /home/giuseppe/.cache/simple-scan/state
[+0,14s] DEBUG: app-window.vala:1885: Restoring window to 687x433 pixels
[+0,40s] DEBUG: scanner.vala:1539: sane_init () -> SANE_STATUS_GOOD
[+0,40s] DEBUG: scanner.vala:1545: SANE version 1.0.29
[+0,40s] DEBUG: scanner.vala:1606: Requesting redetection of scan devices
[+0,40s] DEBUG: scanner.vala:828: Processing request
[+0,57s] DEBUG: app-window.vala:1981: Saving state to /home/giuseppe/.cache/simple-scan/state
[+0,93s] DEBUG: app-window.vala:1981: Saving state to /home/giuseppe/.cache/simple-scan/state
[+9,49s] DEBUG: scanner.vala:341: sane_get_devices () -> SANE_STATUS_GOOD
[+9,49s] DEBUG: scanner.vala:353: Device: name="brother3:net1;dev0" vendor="Brother" model="MFC-J265W" type="MFC-J265W"
[+9,82s] DEBUG: app-window.vala:1981: Saving state to /home/giuseppe/.cache/simple-scan/state
[+22,39s] DEBUG: app-window.vala:1981: Saving state to /home/giuseppe/.cache/simple-scan/state
[+22,80s] DEBUG: app-window.vala:1981: Saving state to /home/giuseppe/.cache/simple-scan/state
[+62,17s] DEBUG: app-window.vala:1981: Saving state to /home/giuseppe/.cache/simple-scan/state
[+62,22s] DEBUG: autosave-manager.vala:201: Deleting autosave records
[+62,22s] DEBUG: scanner.vala:1702: Stopping scan thread
[+62,22s] DEBUG: scanner.vala:828: Processing request
[+62,23s] DEBUG: scanner.vala:1713: sane_exit ()
giuseppe@giuseppe-Aspire-7738:~$ 

[ivantu]

posta qui il contenuto di questo file

Codice: Seleziona tutto

cat -n ~/.cache/simple-scan/state

cat -n /var/log/cups/error_log
1 W [20/May/2021:08:31:23 +0200] [Job 189] Grayscale/monochrome printing requested for this job but Poppler is not able to convert to grayscale/monochrome PostScript.
2 W [20/May/2021:08:31:23 +0200] [Job 189] Use \"pdftops-renderer\" option (see cups-filters README file) to use Ghostscript or MuPDF for the PDF -> PostScript conversion.
3 W [20/May/2021:11:31:26 +0200] [Job 189] Grayscale/monochrome printing requested for this job but Poppler is not able to convert to grayscale/monochrome PostScript.
4 W [20/May/2021:11:31:26 +0200] [Job 189] Use \"pdftops-renderer\" option (see cups-filters README file) to use Ghostscript or MuPDF for the PDF -> PostScript conversion.

Riporta solo questo?
prova spegnere la stampante
poi rimuovi il contenuto del seguente file con questo comando

Codice: Seleziona tutto

sudo rm -r /var/log/cups/error_log

riavvia il sistema
riaccendi la stampante multifunzione
e posta di nuovo qui l'output

Codice: Seleziona tutto

simple-scan -d

Codice: Seleziona tutto

cat -n /var/log/cups/error_log

[criceto45]

Codice: Seleziona tutto

giuseppe@giuseppe-Aspire-7738:~$ cat -n ~/.cache/simple-scan/state
     1	[window]
     2	width=687
     3	height=433
     4	is-maximized=false
     5	is-fullscreen=false
     6	
     7	[scanner]
     8	scan-type=single

riavviato tutto

Codice: Seleziona tutto

giuseppe@giuseppe-Aspire-7738:~$ simple-scan -d
[+0,03s] DEBUG: simple-scan.vala:1720: Starting simple-scan 3.36.3, PID=3177
[+0,03s] DEBUG: unsetenv() is not thread-safe and should not be used after threads are created
[+0,06s] DEBUG: _g_io_module_get_default: Found default implementation dconf (DConfSettingsBackend) for ‘gsettings-backend’
[+0,13s] DEBUG: app-window.vala:1906: Loading state from /home/giuseppe/.cache/simple-scan/state
[+0,14s] DEBUG: app-window.vala:1885: Restoring window to 687x433 pixels
[+0,37s] DEBUG: scanner.vala:1539: sane_init () -> SANE_STATUS_GOOD
[+0,37s] DEBUG: scanner.vala:1545: SANE version 1.0.29
[+0,37s] DEBUG: scanner.vala:1606: Requesting redetection of scan devices
[+0,37s] DEBUG: scanner.vala:828: Processing request
[+0,85s] DEBUG: app-window.vala:1981: Saving state to /home/giuseppe/.cache/simple-scan/state
[+4,75s] DEBUG: autosave-manager.vala:201: Deleting autosave records
[+4,75s] DEBUG: scanner.vala:1702: Stopping scan thread
[+9,14s] DEBUG: scanner.vala:341: sane_get_devices () -> SANE_STATUS_GOOD
[+9,14s] DEBUG: scanner.vala:353: Device: name="brother3:net1;dev0" vendor="Brother" model="MFC-J265W" type="MFC-J265W"
[+9,14s] DEBUG: scanner.vala:828: Processing request
[+9,15s] DEBUG: scanner.vala:1713: sane_exit ()
[+9,16s] CRITICAL: app_window_set_scan_devices: assertion 'self != NULL' failed
giuseppe@giuseppe-Aspire-7738:~$ 

Codice: Seleziona tutto

giuseppe@giuseppe-Aspire-7738:~$ cat -n /var/log/cups/error_log
     1	W [20/May/2021:16:47:44 +0200] [Job 189] Grayscale/monochrome printing requested for this job but Poppler is not able to convert to grayscale/monochrome PostScript.
     2	W [20/May/2021:16:47:44 +0200] [Job 189] Use \"pdftops-renderer\" option (see cups-filters README file) to use Ghostscript or MuPDF for the PDF -> PostScript conversion.
giuseppe@giuseppe-Aspire-7738:~$ 

[ivantu]

prova a fare la prova come ho detto nel messaggio precedente, Spegni la stampante. e riavvia...

poi prova a verificare se avviando simple-scan con i privilegi di root funziona

Codice: Seleziona tutto

sudo simple-scan

però fai molta attenzione. e solo una verifica per vedere se è un problema di gruppi sull'utente nel sistema.

[criceto45]

purtroppo no

[ivantu]

hai anche spento la stampante e riavviato il sistema? e riacceso...

hai detto che la stampante è collegata con porta usb, però gli output riferiscono che è collegata via net e non cavo usb.

[criceto45]

e' collegata al router tramite usb.l'altra stampante aveva due cavi,lan e usb.questa solo uno usb al router.mi correggo ho staccato usb dal router e collegata al notebook adesso lo scanner va

[ivantu]

allora i problemi cambiano.

Domanda molto banale. Hai provato a spegnere il router e riaccenderlo?

[criceto45]

po ricollego l'usb al router?faccio un po di prove,intanto grazie mille

[ivantu]

Se non dovesse funzionare. posta qui l'output da terminale dei seguenti comandi

Codice: Seleziona tutto

cat /etc/sane.d/dll.conf

Codice: Seleziona tutto

cat /etc/sane.d/brother.conf

[criceto45]

allora spento router e collegato usb,non va.ricollegata al pc va.ecco i comandi

Codice: Seleziona tutto

giuseppe@giuseppe-Aspire-7738:~$ cat /etc/sane.d/dll.conf
# dll.conf - Configuration file for the SANE dynamic backend loader
#
# Backends can also be enabled by configuration snippets under the dll.d/
# directory -- third party backends can drop their configuration file in
# this in this directory, named after the backend.
#
# The next line enables the network backend; comment it out if you don't
# need to use a remote SANE scanner over the network -- see sane-net(5)
# and saned(8) for details.
net
abaton
agfafocus
apple
artec
artec_eplus48u
as6e
avision
bh
canon
canon630u
canon_dr
#canon_pp
cardscan
coolscan
#coolscan2
coolscan3
#dc210
#dc240
#dc25
dell1600n_net
dmc
epjitsu
#epson
epson2
epsonds
escl
fujitsu
genesys
#gphoto2
gt68xx
hp
hp3500
hp3900
hp4200
hp5400
hp5590
hpljm1005
hpsj5s
hs2p
ibm
kodak
kodakaio
kvs1025
kvs20xx
kvs40xx
leo
lexmark
ma1509
magicolor
matsushita
microtek
microtek2
mustek
#mustek_pp
mustek_usb
mustek_usb2
nec
niash
#p5
pie
pieusb
pint
pixma
plustek
#plustek_pp
#pnm
qcam
ricoh
ricoh2
rts8891
s9036
sceptre
sharp
sm3600
sm3840
snapscan
sp15c
#st400
#stv680
tamarack
teco1
teco2
teco3
#test
u12
umaxumax1220u
#umax_pp
v4l
xerox_mfp
brother2

#



































brother4





brother3
giuseppe@giuseppe-Aspire-7738:~$ cat /etc/sane.d/brother.conf
#Ubuntu 

# Brother USB
# For libusb support for unknown scanners use the following command
# usb <product ID> <device ID>
usb 0x04f9 0x01f5
giuseppe@giuseppe-Aspire-7738:~$ 

penso sia da regolare questa cartella cat /etc/sane.d/dll.conf non so come si fa,non riesco ad aprirla
non ancora fatto,ma andrebbe bene cosi'?