grazie ancora. Lo so che laggiù fa caldo, ma porta pazienza con noi neofiti.
Questo è il tuo lettore:
Bus 001 Device 003: ID 25dd:3111 bit4id miniLector-EVO
Il primo c'è
<string>0x25DD</string>
Il ProductID c'è:
<string>0x3111</string>
<string>Bit4id miniLector AIR EVO</string>
A parte questo
<string>Bit4id miniLector AIR EVO</string>
le stringhe a riferimento 25dd 3111
sul mio Lubuntu nel medesimo file sono presenti, sei sicuro di aver postato tutto il contenuto? Sul tuo, output, non le vedo.
o hai una versione datata di qualche pacchetto di libreria sul tuo sistema Xubuntu.
Che pollo sono stato, non ho controllato. Si manca qualcosa, ma il comando da terminale taglia la parte principale. Ho aperto direttamente il file e questa dovrebbe essere la parte mancante:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>CFBundleDevelopmentRegion</key>
<string>English</string>
<key>CFBundleExecutable</key>
<string>libacsccid.so</string>
<key>CFBundleIdentifier</key>
<string>hk.com.acs.ccid</string>
<key>CFBundleInfoDictionaryVersion</key>
<string>6.0</string>
<key>CFBundlePackageType</key>
<string>BNDL</string>
<key>CFBundleShortVersionString</key>
<string>1.1.8</string>
<key>CFBundleSignature</key>
<string>????</string>
<key>CFBundleVersion</key>
<string>0.0.1d1</string>
<key>ifdCapabilities</key>
<string>0x00000000</string>
<!-- Possible values for ifdCapabilities bits
1: IFD_GENERATE_HOTPLUG
plugging the reader calls pcscd \-\-hotplug
Default value is 0x00000000
-->
<key>ifdProtocolSupport</key>
<string>0x00000001</string>
<key>ifdVersionNumber</key>
<string>0x00000001</string>
<key>ifdLogLevel</key>
<string>0x0003</string>
<!-- Possible values for ifdLogLevel
1: CRITICAL important error messages
2: INFO informative messages like what reader was detected
4: COMM a dump of all the bytes exchanged between the host and
the reader
8: PERIODIC periodic info when pcscd test if a card is present
(every 1/10 of a second)
The final value is a OR of these values
Default value: 3 (CRITICAL + INFO)
-->
<key>ifdDriverOptions</key>
<string>0x0000</string>
<!-- Possible values for ifdDriverOptions
0x01: DRIVER_OPTION_CCID_EXCHANGE_AUTHORIZED
the CCID Exchange command is allowed. You can use it through
SCardControl(hCard, IOCTL_SMARTCARD_VENDOR_IFD_EXCHANGE, ...)
0x02: DRIVER_OPTION_GEMPC_TWIN_KEY_APDU
If set the GemPC Twin and GemPC Key readers with be configured
so that the T=1 TPDU protocol is done by the firmware instead of
the driver.
This switches the reader in APDU mode and also in EMV mode so
may not work with non EMV cards.
0x04: DRIVER_OPTION_USE_BOGUS_FIRMWARE
Some reader firmwares have bugs. By default the driver refuses
to work with such firmware versions. If your reader is rejected
because of the firmware (log message: "Firmware (x.y) is
bogus!") you can:
- upgrade your reader firmware (not all readers can do that)
or
- get another reader with a new/bugfree firmware
or
- activate this option but you will have problems depending on
the bug
0x08: free
bits 4 & 5: (values 0x00, 0x10, 0x20, 0x30)
0x00: power on the card at 5V, then 1.8V then 3V (default value)
0x10: power on the card at 3V, then 5V then 1.8V
0x20: power on the card at 1.8V, then 3V and then 5V
0x30: let the reader decide
0x40: DRIVER_OPTION_DISABLE_PIN_RETRIES
The Gemalto pinpad reader sends a VERIFY command with no PIN
value in order to retreive the remaining retries from the card.
Some cards (like the OpenPGP card) do not support this.
Default value: 0
-->
<key>ifdACSDriverOptions</key>
<string>0x0003</string>
<!-- Possible values for ifdACSDriverOptions
1: ACS_DRIVER_OPTION_REMOVE_PUPI_FROM_ATR
Remove PUPI from ATR if ISO 14443-B card is detected (ACR85/ACR1222).
2: ACS_DRIVER_OPTION_DISABLE_PICC
Disable PICC if ICC is inserted (ACR85/ACR1222).
Default value: 3
-->
<key>ifdACR38CardVoltage</key>
<string>0</string>
<!-- Possible values for ifdACR38CardVoltage
Card voltage selection for ACR38U, ACR38U-SAM and SCR21U readers
0: Auto Detection
1: 5V Card
2: 3V Card
3: 1.8V Card
Default value: 0
-->
<key>ifdACR38CardType</key>
<string>0</string>
<!-- Possible values for ifdACR38CardType
Card type selection for ACR38U, ACR38U-SAM and SCR21U readers
0: MCU
1: IIC (Auto Detect Memory Size)
This value is not supported.
2: IIC (1K)
3: IIC (2K)
4: IIC (4K)
5: IIC (8K)
6: IIC (16K)
7: IIC (32K)
8: IIC (64K)
9: IIC (128K)
10: IIC (256K)
11: IIC (512K)
12: IIC (1024K)
13: AT88SC153
14: AT88SC1608
15: SLE4418
16: SLE4428
17: SLE4432
18: SLE4442
19: SLE4406
20: SLE4436
21: SLE5536
These values are not supported in ACR38U-SAM and SCR21U readers.
22: MCUT0
23: MCUT1
24: Auto Detection
This value is not supported.
Default value: 0
-->
<key>ifdManufacturerString</key>
<string>Advanced Card Systems Ltd.</string>
<key>ifdProductString</key>
<string>ACS CCID driver</string>
<key>ifdVendorID</key>
<array>
<string>0x072f</string>
<string>0x072f</string>
<string>0x072f</string>
<string>0x072f</string>
<string>0x072f</string>
<string>0x072f</string>
<string>0x072f</string>
<string>0x072f</string>
<string>0x072f</string>
<string>0x072f</string>
<string>0x072f</string>
<string>0x072f</string>
<string>0x072f</string>
<string>0x072f</string>
<string>0x072f</string>
<string>0x072f</string>
<string>0x072f</string>
<string>0x072f</string>
<string>0x072f</string>
<string>0x072f</string>
<string>0x072f</string>
<string>0x072f</string>
<string>0x072f</string>
<string>0x072f</string>
<string>0x072f</string>
<string>0x072f</string>
<string>0x072f</string>
<string>0x072f</string>
<string>0x072f</string>
<string>0x072f</string>
<string>0x072f</string>
<string>0x072f</string>
<string>0x072f</string>
<string>0x072f</string>
<string>0x072f</string>
<string>0x072f</string>
<string>0x072f</string>
<string>0x072f</string>
<string>0x072f</string>
<string>0x072f</string>
<string>0x072f</string>
<string>0x072f</string>
<string>0x072f</string>
<string>0x072f</string>
<string>0x072f</string>
<string>0x072f</string>
<string>0x072f</string>
<string>0x072f</string>
<string>0x072f</string>
<string>0x072f</string>
<string>0x072f</string>
<string>0x072f</string>
<string>0x072f</string>
<string>0x072f</string>
<string>0x072f</string>
<string>0x072f</string>
<string>0x072f</string>
<string>0x072f</string>
<string>0x072f</string>
<string>0x072f</string>
<string>0x072f</string>
<string>0x072f</string>
<string>0x072f</string>
<string>0x072f</string>
<string>0x072f</string>
<string>0x072f</string>
<string>0x072f</string>
<string>0x072f</string>
<string>0x072f</string>
<string>0x072f</string>
<string>0x072f</string>
<string>0x072f</string>
<string>0x072f</string>
<string>0x072f</string>
<string>0x072f</string>
<string>0x072f</string>
<string>0x072f</string>
<string>0x072f</string>
<string>0x072f</string>
<string>0x072f</string>
<string>0x072f</string>
<string>0x072f</string>
<string>0x072f</string>
<string>0x072f</string>
<string>0x072f</string>
<string>0x072f</string>
<string>0x072f</string>
<string>0x072f</string>
<string>0x072f</string>
<string>0x072f</string>
<string>0x072f</string>
<string>0x072f</string>
<string>0x072f</string>
</array>
<key>ifdProductID</key>
Ultima modifica di Roberto Pontecorvi il domenica 29 agosto 2021, 12:06, modificato 1 volta in totale.
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>CFBundleDevelopmentRegion</key>
<string>English</string>
<key>CFBundleExecutable</key>
<string>libccid.so</string>
<key>CFBundleIdentifier</key>
<string>org.debian.alioth.pcsclite.smartcardccid</string>
<key>CFBundleInfoDictionaryVersion</key>
<string>6.0</string>
<key>CFBundleName</key>
<string>CCIDCLASSDRIVER</string>
<key>CFBundlePackageType</key>
<string>BNDL</string>
<key>CFBundleShortVersionString</key>
<string>1.4.31</string>
<key>CFBundleSignature</key>
<string>????</string>
<key>CFBundleVersion</key>
<string>0.0.1d1</string>
<key>ifdCapabilities</key>
<string>0x00000000</string>
<!-- Possible values for ifdCapabilities bits
1: IFD_GENERATE_HOTPLUG
plugging the reader calls pcscd \-\-hotplug
Default value is 0x00000000
-->
<key>ifdProtocolSupport</key>
<string>0x00000001</string>
<key>ifdVersionNumber</key>
<string>0x00000001</string>
<key>ifdLogLevel</key>
<string>0x0003</string>
<!-- Possible values for ifdLogLevel
1: CRITICAL important error messages
2: INFO informative messages like what reader was detected
4: COMM a dump of all the bytes exchanged between the host and
the reader
8: PERIODIC periodic info when pcscd test if a card is present
(every 1/10 of a second)
The final value is a OR of these values
Default value: 3 (CRITICAL + INFO)
-->
<key>ifdDriverOptions</key>
<string>0x0000</string>
<!-- Possible values for ifdDriverOptions
0x01: DRIVER_OPTION_CCID_EXCHANGE_AUTHORIZED
the CCID Exchange command is allowed. You can use it through
SCardControl(hCard, IOCTL_SMARTCARD_VENDOR_IFD_EXCHANGE, ...)
0x02: DRIVER_OPTION_GEMPC_TWIN_KEY_APDU
If set the GemPC Twin and GemPC Key readers with be configured
so that the T=1 TPDU protocol is done by the firmware instead of
the driver.
This switches the reader in APDU mode and also in EMV mode so
may not work with non EMV cards.
0x04: DRIVER_OPTION_USE_BOGUS_FIRMWARE
Some reader firmwares have bugs. By default the driver refuses
to work with such firmware versions. If your reader is rejected
because of the firmware (log message: "Firmware (x.y) is
bogus!") you can:
- upgrade your reader firmware (not all readers can do that)
or
- get another reader with a new/bugfree firmware
or
- activate this option but you will have problems depending on
the bug
0x08: free
bits 4 & 5: (values 0x00, 0x10, 0x20, 0x30)
0x00: power on the card at 5V, then 1.8V then 3V (default value)
0x10: power on the card at 3V, then 5V then 1.8V
0x20: power on the card at 1.8V, then 3V and then 5V
0x30: let the reader decide
0x40: DRIVER_OPTION_DISABLE_PIN_RETRIES
The Gemalto pinpad reader sends a VERIFY command with no PIN
value in order to retreive the remaining retries from the card.
Some cards (like the OpenPGP card) do not support this.
Default value: 0
-->
<key>ifdManufacturerString</key>
<string>Ludovic Rousseau (ludovic.rousseau@free.fr)</string>
<key>ifdProductString</key>
<string>Generic CCID driver</string>
<key>ifdVendorID</key>
<array>
<string>0x072F</string>
<string>0x09C3</string>
<string>0x09C3</string>
<string>0x058F</string>
<string>0x058F</string>
<string>0x0DC3</string>
<string>0x0DC3</string>
<string>0x1B0E</string>
<string>0x0783</string>
<string>0x046A</string>
<string>0x046A</string>
<string>0x046A</string>
<string>0x046A</string>
<string>0x0982</string>
<string>0x413C</string>
<string>0x413C</string>
<string>0x073D</string>
<string>0x073D</string>
<string>0x073D</string>
<string>0x073D</string>
<string>0x073D</string>
<string>0x08E6</string>
<string>0x08E6</string>
<string>0x08E6</string>
<string>0x08E6</string>
<string>0x08E6</string>
<string>0x08E6</string>
<string>0x08E6</string>
<string>0x08E6</string>
<string>0x08E6</string>
<string>0x08E6</string>
<string>0x08E6</string>
<string>0x08E6</string>
<string>0x1059</string>
<string>0x1059</string>
<string>0x0B81</string>
<string>0x0F14</string>
<string>0x0F14</string>
<string>0x0D46</string>
<string>0x0D46</string>
<string>0x0D46</string>
<string>0x0D46</string>
<string>0x17EF</string>
<string>0x09BE</string>
<string>0x076B</string>
<string>0x076B</string>
<string>0x03F0</string>
<string>0x04E6</string>
<string>0x04E6</string>
<string>0x04E6</string>
<string>0x04E6</string>
<string>0x04E6</string>
<string>0x04E6</string>
<string>0xA625</string>
<string>0x08E6</string>
<string>0x08E6</string>
<string>0x0F14</string>
<string>0x0F14</string>
<string>0x0F14</string>
<string>0x0DB5</string>
<string>0x0DB5</string>
<string>0x0DB5</string>
<string>0x072F</string>
<string>0x072F</string>
<string>0x072F</string>
<string>0x072F</string>
<string>0x072F</string>
<string>0x072F</string>
<string>0x072F</string>
<string>0x072F</string>
<string>0x072F</string>
<string>0x072F</string>
<string>0x072F</string>
<string>0x072F</string>
<string>0x2021</string>
<string>0x2021</string>
<string>0x2021</string>
<string>0x0A89</string>
<string>0x0A89</string>
<string>0x0A89</string>
<string>0x0A89</string>
<string>0x0A89</string>
<string>0x0A89</string>
<string>0x24DC</string>
<string>0x24DC</string>
<string>0x24DC</string>
<string>0x24DC</string>
<string>0x24DC</string>
<string>0x24DC</string>
<string>0x24DC</string>
<string>0x24DC</string>
<string>0x2CE3</string>
<string>0x058F</string>
<string>0x0483</string>
<string>0x2406</string>
<string>0x2406</string>
<string>0x2406</string>
<string>0x1FD3</string>
<string>0x0DC3</string>
<string>0x0DC3</string>
<string>0x0DC3</string>
<string>0x03EB</string>
<string>0x03EB</string>
<string>0x03EB</string>
<string>0x03EB</string>
<string>0x03EB</string>
<string>0x03EB</string>
<string>0x03EB</string>
<string>0xC1A6</string>
<string>0x15CF</string>
<string>0x15CF</string>
<string>0x15CF</string>
<string>0x04E6</string>
<string>0x23A0</string>
<string>0x23A0</string>
<string>0x23A0</string>
<string>0x23A0</string>
<string>0x25DD</string>
<string>0x25DD</string>
<string>0x25DD</string>
<string>0x25DD</string>
<string>0x25DD</string>
<string>0x25DD</string>
<string>0x25DD</string>
<string>0x25DD</string>
<string>0x25DD</string>
<string>0x25DD</string>
<string>0x25DD</string>
<string>0x25DD</string>
<string>0x2ABE</string>
<string>0x1B0E</string>
<string>0x0A5C</string>
<string>0x0A5C</string>
<string>0x0A5C</string>
<string>0x0A5C</string>
<string>0x0A5C</string>
<string>0x0A5C</string>
<string>0x0A5C</string>
<string>0x0A5C</string>
<string>0x0A5C</string>
<string>0x0783</string>
<string>0x0783</string>
<string>0x0783</string>
<string>0x0783</string>
<string>0x0CA6</string>
<string>0x8829</string>
<string>0x2DFF</string>
<string>0x2DFF</string>
<string>0x19E7</string>
<string>0x046A</string>
<string>0x046A</string>
<string>0x046A</string>
<string>0x046A</string>
<string>0x046A</string>
<string>0x046A</string>
<string>0x046A</string>
<string>0x046A</string>
<string>0x046A</string>
<string>0x046A</string>
<string>0x046A</string>
<string>0x04F2</string>
<string>0x03F0</string>
<string>0x03F0</string>
<string>0x04F2</string>
<string>0x0982</string>
<string>0x0982</string>
<string>0x257B</string>
<string>0x1DB2</string>
<string>0x1DB2</string>
<string>0x257B</string>
<string>0x09D8</string>
<string>0x09D8</string>
<string>0x2CE4</string>
<string>0x096E</string>
<string>0x096E</string>
<string>0x096E</string>
<string>0x096E</string>
<string>0x096E</string>
<string>0x096E</string>
<string>0x096E</string>
<string>0x096E</string>
<string>0x096E</string>
<string>0x096E</string>
<string>0x096E</string>
<string>0x234B</string>
<string>0x096E</string>
<string>0x096E</string>
<string>0x096E</string>
<string>0x096E</string>
<string>0x096E</string>
<string>0x0BF8</string>
<string>0x0BF8</string>
<string>0x0BF8</string>
<string>0x0BF8</string>
<string>0x0BF8</string>
<string>0x0BF8</string>
<string>0x0BF8</string>
<string>0x08E6</string>
<string>0x08E6</string>
<string>0x08E6</string>
<string>0x08E6</string>
<string>0x08E6</string>
<string>0x08E6</string>
<string>0x08E6</string>
<string>0x08E6</string>
<string>0x08E6</string>
<string>0x08E6</string>
<string>0x0BDA</string>
<string>0x048D</string>
<string>0x076B</string>
<string>0x05E3</string>
<string>0x05E3</string>
<string>0x20A0</string>
<string>0x1059</string>
<string>0x1059</string>
<string>0x0F1A</string>
<string>0x19C8</string>
<string>0x1677</string>
<string>0x03F0</string>
<string>0x03F0</string>
<string>0x03F0</string>
<string>0x09C3</string>
<string>0x09C3</string>
<string>0x09C3</string>
<string>0x09C3</string>
<string>0x076B</string>
<string>0x076B</string>
<string>0x076B</string>
<string>0x076B</string>
<string>0x076B</string>
<string>0x076B</string>
<string>0x076B</string>
<string>0x076B</string>
<string>0x076B</string>
<string>0x076B</string>
<string>0x076B</string>
<string>0x076B</string>
<string>0x076B</string>
<string>0x04A4</string>
<string>0x04A4</string>
<string>0x0B81</string>
<string>0x04E6</string>
<string>0x04E6</string>
<string>0x04E6</string>
<string>0x04E6</string>
<string>0x04E6</string>
<string>0x04E6</string>
<string>0x04E6</string>
<string>0x04E6</string>
<string>0x04E6</string>
<string>0x04E6</string>
<string>0x04E6</string>
<string>0x04E6</string>
<string>0x04E6</string>
<string>0x04E6</string>
<string>0x04E6</string>
<string>0x04E6</string>
<string>0x04E6</string>
<string>0x04E6</string>
<string>0x04E6</string>
<string>0x04E6</string>
<string>0x04E6</string>
<string>0x1FFA</string>
<string>0x2406</string>
<string>0x03EB</string>
<string>0x03EB</string>
<string>0x2FD2</string>
<string>0x1FC9</string>
<string>0x1403</string>
<string>0x2406</string>
<string>0x2406</string>
<string>0x2406</string>
<string>0x2406</string>
<string>0x2406</string>
<string>0x2406</string>
<string>0x2406</string>
<string>0x2406</string>
<string>0x076B</string>
<string>0x2A18</string>
<string>0x2A18</string>
<string>0x2A18</string>
<string>0x28B9</string>
<string>0x2F76</string>
<string>0x0483</string>
<string>0x0D46</string>
<string>0x0D46</string>
<string>0x0D46</string>
<string>0x0D46</string>
<string>0x0D46</string>
<string>0x0D46</string>
<string>0x0D46</string>
<string>0x2D25</string>
<string>0x2D25</string>
<string>0x2C97</string>
<string>0x17EF</string>
<string>0x17EF</string>
<string>0x03F0</string>
<string>0x03F0</string>
<string>0x03F0</string>
Ultima modifica di Roberto Pontecorvi il lunedì 30 agosto 2021, 15:39, modificato 1 volta in totale.
Non ho ancora rimesso mano alla Carta sanitaria, perchè sto cercando si capire perchè sulla quando si aggiorna il kernal mi dà questo errore - initramfs - schermo nero con scritte e lo fà su due pc diversi, dove sono costretto da live dare il comando:
per poter ripartire. Su tutte e due i pc oltre la 20.4 ho la 18.4 che non ha questi problemi. Appena posso riprenderò il problema della CS. Saluti e grazie per l'interessamento.
Penso di aver individuato il problema. Mi pare che - Systemback - con la 20.4 mate non vada tanto bene. Ora vado avanti senza installarlo, così verifico se questo è il problema.
Penso di aver individuato il problema. Mi pare che - Systemback - con la 20.4 mate non vada tanto bene. Ora vado avanti senza installarlo, così verifico se questo è il problema.
Io ho un problema simile: il lettore bid4id ella regione Lombardia non viene riconosciuto dal crs manager della stessa regione.
Eppure qualcosa viene visto
Presumo che dovrei installare degli ulteriori driver. ma quali?
Ma soprattutto: alla fine riesco a usare il crs manager e a fare una firma elettronica? O è solo tempo perso?