[Risolto] Scanner HP DeskJet 2721e non rilevato

[frap]

grazie dell'aiuto, ma

Codice: Seleziona tutto

Il pacchetto "ippusbxd" non è installato e quindi non è stato rimosso

[Rafbor]

bene, in questo modo siamo sicuri che non sia la causa.

[frap]

Visto che il Driver Plug-in Installation di HP Device Manager non avanza se gli dico di scaricare i plug-in dal server HP autorizzato, devo forse abilitare qualche repository? Oppure posso scaricare io i plug-in files e dirgli di installarli usando la local copy?

[Roberto Pontecorvi]

Li puoi scaricare da qui -> https://www.openprinting.org/download/p ... P/plugins/ e li installi come hai detto.
Un mio consiglio è di installare hplip3.22.10.

[frap]

installazione hplip 3.22.10 quasi ultimata, si apre hp DM che mi chiede:

come procedo? yes or not?!

[frap]

Bho, ho detto "no", forse avrei dovuto dire si?!
comunque, da terminale il mio tentativo di installare hplip 3.22.10: ho scaricato il .run in Scaricati, dove c'era ancora la cartella dei files della 3.20.5.
non capisco se ha reinstallato la vecchia versione 3.20.5.
dovrei metterla nel cestino quella cartella prima di avviare installazione del 3.22.10.run?!

Codice: Seleziona tutto

frapponzio@fraptop:~/Scaricati$ sh hplip-*.run 
Creating directory hplip-3.20.5
Verifying archive integrity... All good.
Uncompressing HPLIP 3.20.5 Self Extracting Archive....................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................

HP Linux Imaging and Printing System (ver. 3.20.5)
HPLIP Installer ver. 5.1

Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

Installer log saved in: hplip-install_Mon-03-Apr-2023_13:07:02.log

\
note: Defaults for each question are maked with a '*'. Press <enter> to accept the default.
|Gtk-Message: 13:07:03.944: Failed to load module "canberra-gtk-module"
 

INSTALLATION MODE
-----------------
Automatic mode will install the full HPLIP solution with the most common options.
Custom mode allows you to choose installation options to fit specific requirements.

Please choose the installation mode (a=automatic*, c=custom, q=quit) :  


INTRODUCTION
------------
This installer will install HPLIP version 3.20.5 on your computer.
Please close any running package management systems now (YaST, Adept, Synaptic, Up2date, etc).


DISTRO/OS CONFIRMATION
----------------------
Distro appears to be Ubuntu 20.04.

Is "Ubuntu 20.04" your correct distro/OS and version (y=yes*, n=no, q=quit) ? 

Initializing. Please wait...


ENTER USER PASSWORD
-------------------
Please enter the sudoer (frapponzio)'s password: 
 

INSTALLATION NOTES
------------------
Enable the universe/multiverse repositories. Also be sure you are using the Ubuntu "Main" Repositories. See: https://help.ubuntu.com/community/Repositories/Ubuntu for more information.  Disable the CD-ROM/DVD source if you do not have the Ubuntu installation media inserted in the drive.

Please read the installation notes. Press <enter> to continue or 'q' to quit: 


SECURITY PACKAGES
-----------------
AppArmor is installed. 
AppArmor protects the application from external intrusion attempts making the application secure

Would you like to have this installer install the hplip specific policy/profile (y=yes*, n=no, q=quit) ? 


RUNNING PRE-INSTALL COMMANDS
----------------------------
OK


CHECKING FOR NETWORK CONNECTION
-------------------------------
Network connection present.


RUNNING PRE-PACKAGE COMMANDS
----------------------------
sudo dpkg --configure -a (Pre-depend step 1)
sudo apt-get install --yes --force-yes -f (Pre-depend step 2)
sudo apt-get update (Pre-depend step 3)
OK


DEPENDENCY AND CONFLICT RESOLUTION
----------------------------------
-Gtk-Message: 13:09:12.683: Failed to load module "canberra-gtk-module"
HPLIP-3.20.5 exists, this may conflict with the new one being installed.
Do you want to ('i'= Remove and Install*, 'q'= Quit)?    :
Starting uninstallation...
error: Failed to close HP-Toolbox/HP-Systray. Close manually and run hp-uninstall again.
warning: Failed to uninstall existing HPLIP-3.20.5. This installation will overwrite on existing HPLIP


RUNNING POST-PACKAGE COMMANDS
-----------------------------
OK


RE-CHECKING DEPENDENCIES
------------------------
\Gtk-Message: 13:09:56.229: Failed to load module "canberra-gtk-module"
OK


RUNNING SCANJET DEPENDENCY COMMANDS
-----------------------------------
sudo apt-get install --assume-yes python3-pip (Scanjet-depend step 1)
sudo pip3 install --upgrade pip (Scanjet-depend step 2)
sudo apt-get install --assume-yes libleptonica-dev (Scanjet-depend step 3)
sudo apt-get install --assume-yes tesseract-ocr (Scanjet-depend step 4)
sudo apt-get install --assume-yes libtesseract-dev (Scanjet-depend step 5)
sudo -H pip3 install tesserocr (Scanjet-depend step 6)
sudo -H pip3 install opencv-python (Scanjet-depend step 7)
sudo -H pip3 install PyPDF2 (Scanjet-depend step 8)
sudo -H pip3 install imutils (Scanjet-depend step 9)
sudo -H pip3 install ocrmypdf (Scanjet-depend step 10)
sudo -H pip3 install scikit-image (Scanjet-depend step 11)
sudo -H pip3 install scipy (Scanjet-depend step 12)
sudo apt-get install --assume-yes qpdf (Scanjet-depend step 13)
OK


PRE-BUILD COMMANDS
------------------
OK


BUILD AND INSTALL
-----------------
Running './configure --with-hpppddir=/usr/share/ppd/HP --libdir=/usr/lib --prefix=/usr --enable-network-build --enable-scan-build --enable-fax-build --enable-dbus-build --disable-qt4 --enable-qt5 --disable-class-driver --enable-doc-build --disable-policykit --disable-libusb01_build --disable-udev_sysfs_rules --enable-hpcups-install --disable-hpijs-install --disable-foomatic-ppd-install --disable-foomatic-drv-install --disable-cups-ppd-install --enable-cups-drv-install --enable-apparmor_build'
Please wait, this may take several minutes...
Command completed successfully.

Running 'make clean'
Please wait, this may take several minutes...
Command completed successfully.

Running 'make'
Please wait, this may take several minutes...
Command completed successfully.

Running 'sudo make install'
Please wait, this may take several minutes...
Command completed successfully.


Build complete.



POST-BUILD COMMANDS
-------------------
 

CLOSE HP_SYSTRAY
----------------
Sending close message to hp-systray (if it is currently running)...
OK


HPLIP UPDATE NOTIFICATION
-------------------------
Do you want to check for HPLIP updates?. (y=yes*, n=no) : 


RESTART OR RE-PLUG IS REQUIRED
------------------------------
If you are installing a USB connected printer, and the printer was plugged in when you started this installer, you will need to either restart  
your PC or unplug and re-plug in your printer (USB cable only). If you choose to restart, run this command after restarting: hp-setup (Note: If 
you are using a parallel connection, you will have to restart your PC. If you are using network/wireless, you can ignore and continue).         

Restart or re-plug in your printer (r=restart, p=re-plug in*, i=ignore/continue, q=quit) : 
Please unplug and re-plugin your printer now.  Press <enter> to continue or 'q' to quit: 


PRINTER SETUP
-------------
Please make sure your printer is connected and powered on at this time.
Do you want to setup printer in GUI mode? (u=GUI mode*, i=Interactive mode) : 

HP Linux Imaging and Printing System (ver. 3.20.5)
Printer/Fax Setup Utility ver. 9.0

Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

Searching... (bus=usb, search=(None), desc=0)
Exiting the setup...

Done.


RE-STARTING HP_SYSTRAY
----------------------

HP Linux Imaging and Printing System (ver. 3.20.5)
System Tray Status Service ver. 2.0

Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

frapponzio@fraptop:~/Scaricati$ 
HP Linux Imaging and Printing System (ver. 3.20.5)
HP Device Manager ver. 15.0

Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

/usr/share/hplip/ui5/devmgr_ext.py:15: SyntaxWarning: "is not" with a literal. Did you mean "!="?
  if self.latest_available_version is not "":
/usr/share/hplip/ui5/devmgr_ext.py:37: SyntaxWarning: "is not" with a literal. Did you mean "!="?
  if self.latest_available_version is not "":
\Gtk-Message: 13:17:07.790: Failed to load module "canberra-gtk-module"

HP Linux Imaging and Printing System (ver. 3.20.5)
Diagnose Plugin Utility ver. 1.0

Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.


HP Linux Imaging and Printing System (ver. 3.20.5)
Plugin Download and Install Utility ver. 2.1

Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.


HP Linux Imaging and Printing System (ver. 3.20.5)
Plugin Download and Install Utility ver. 2.1

Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

Checking for network connection...
Downloading plug-in from: 
Traceback (most recent call last):
  File "/usr/share/hplip/base/password.py", line 85, in get_distro_name
    os_name = platform.dist()[0]
AttributeError: module 'platform' has no attribute 'dist'

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/usr/share/hplip/ui5/plugindialog.py", line 248, in NextButton_clicked
    status, download_plugin_file, error_str = self.pluginObj.download(self.plugin_path,self.plugin_download_callback)
  File "/usr/share/hplip/installer/pluginhandler.py", line 254, in download
    core = core_install.CoreInstall()
  File "/usr/share/hplip/installer/core_install.py", line 240, in __init__
    self.passwordObj = password.Password(ui_mode)
  File "/usr/share/hplip/base/password.py", line 118, in __init__
    self.__readAuthType()  # self.__authType
  File "/usr/share/hplip/base/password.py", line 141, in __readAuthType
    distro_name = get_distro_name().lower().replace(" ","")
  File "/usr/share/hplip/base/password.py", line 88, in get_distro_name
    os_name = distro.linux_distribution()[0]
  File "/usr/lib/python3/dist-packages/distro.py", line 122, in linux_distribution
    return _distro.linux_distribution(full_distribution_name)
  File "/usr/lib/python3/dist-packages/distro.py", line 677, in linux_distribution
    self.version(),
  File "/usr/lib/python3/dist-packages/distro.py", line 737, in version
    self.lsb_release_attr('release'),
  File "/usr/lib/python3/dist-packages/distro.py", line 899, in lsb_release_attr
    return self._lsb_release_info.get(attribute, '')
  File "/usr/lib/python3/dist-packages/distro.py", line 552, in __get__
    ret = obj.__dict__[self._fname] = self._f(obj)
  File "/usr/lib/python3/dist-packages/distro.py", line 1012, in _lsb_release_info
    stdout = subprocess.check_output(cmd, stderr=devnull)
  File "/usr/lib/python3.8/subprocess.py", line 415, in check_output
    return run(*popenargs, stdout=PIPE, timeout=timeout, check=True,
  File "/usr/lib/python3.8/subprocess.py", line 516, in run
    raise CalledProcessError(retcode, process.args,
subprocess.CalledProcessError: Command '('lsb_release', '-a')' returned non-zero exit status 1.
Error in sys.excepthook:
Traceback (most recent call last):
  File "/usr/lib/python3/dist-packages/apport_python_hook.py", line 72, in apport_excepthook
    from apport.fileutils import likely_packaged, get_recent_crashes
  File "/usr/lib/python3/dist-packages/apport/__init__.py", line 5, in <module>
    from apport.report import Report
  File "/usr/lib/python3/dist-packages/apport/report.py", line 32, in <module>
    import apport.fileutils
  File "/usr/lib/python3/dist-packages/apport/fileutils.py", line 12, in <module>
    import os, glob, subprocess, os.path, time, pwd, sys, requests_unixsocket
  File "/usr/lib/python3/dist-packages/requests_unixsocket/__init__.py", line 1, in <module>
    import requests
  File "/usr/lib/python3/dist-packages/requests/__init__.py", line 95, in <module>
    from urllib3.contrib import pyopenssl
  File "/usr/lib/python3/dist-packages/urllib3/contrib/pyopenssl.py", line 46, in <module>
    import OpenSSL.SSL
  File "/usr/lib/python3/dist-packages/OpenSSL/__init__.py", line 8, in <module>
    from OpenSSL import crypto, SSL
  File "/usr/lib/python3/dist-packages/OpenSSL/crypto.py", line 1553, in <module>
    class X509StoreFlags(object):
  File "/usr/lib/python3/dist-packages/OpenSSL/crypto.py", line 1573, in X509StoreFlags
    CB_ISSUER_CHECK = _lib.X509_V_FLAG_CB_ISSUER_CHECK
AttributeError: module 'lib' has no attribute 'X509_V_FLAG_CB_ISSUER_CHECK'

Original exception was:
Traceback (most recent call last):
  File "/usr/share/hplip/base/password.py", line 85, in get_distro_name
    os_name = platform.dist()[0]
AttributeError: module 'platform' has no attribute 'dist'

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/usr/share/hplip/ui5/plugindialog.py", line 248, in NextButton_clicked
    status, download_plugin_file, error_str = self.pluginObj.download(self.plugin_path,self.plugin_download_callback)
  File "/usr/share/hplip/installer/pluginhandler.py", line 254, in download
    core = core_install.CoreInstall()
  File "/usr/share/hplip/installer/core_install.py", line 240, in __init__
    self.passwordObj = password.Password(ui_mode)
  File "/usr/share/hplip/base/password.py", line 118, in __init__
    self.__readAuthType()  # self.__authType
  File "/usr/share/hplip/base/password.py", line 141, in __readAuthType
    distro_name = get_distro_name().lower().replace(" ","")
  File "/usr/share/hplip/base/password.py", line 88, in get_distro_name
    os_name = distro.linux_distribution()[0]
  File "/usr/lib/python3/dist-packages/distro.py", line 122, in linux_distribution
    return _distro.linux_distribution(full_distribution_name)
  File "/usr/lib/python3/dist-packages/distro.py", line 677, in linux_distribution
    self.version(),
  File "/usr/lib/python3/dist-packages/distro.py", line 737, in version
    self.lsb_release_attr('release'),
  File "/usr/lib/python3/dist-packages/distro.py", line 899, in lsb_release_attr
    return self._lsb_release_info.get(attribute, '')
  File "/usr/lib/python3/dist-packages/distro.py", line 552, in __get__
    ret = obj.__dict__[self._fname] = self._f(obj)
  File "/usr/lib/python3/dist-packages/distro.py", line 1012, in _lsb_release_info
    stdout = subprocess.check_output(cmd, stderr=devnull)
  File "/usr/lib/python3.8/subprocess.py", line 415, in check_output
    return run(*popenargs, stdout=PIPE, timeout=timeout, check=True,
  File "/usr/lib/python3.8/subprocess.py", line 516, in run
    raise CalledProcessError(retcode, process.args,
subprocess.CalledProcessError: Command '('lsb_release', '-a')' returned non-zero exit status 1.

Per quanto riguarda i plug-ins su https://www.openprinting.org/download/p ... P/plugins/, una volta riuscito il passaggio alla nuova versione di hplip, cosa dovrei scaricare?
immagino: hplip-3.22.10-plugin.run e hplip-3.22.10-plugin.run.asc
giusto?
li metto in scaricati e li faccio aprire dal device manager...giusto?

[magozurlinux]

hplip-3.22.10-plugin.run

Traduzione della finestra:

Installazione fallita dei plugin.

Forse hai saltato l'installazione dei plugin o la password è sbagliata.

Eri connesso ad Internet?

Da terminale postami questo comando:

Codice: Seleziona tutto

dpkg -l | grep hplip

Da terminale connesso ad Internet dai questi comandi:

Codice: Seleziona tutto

sudo apt update

Codice: Seleziona tutto

sudo apt install libcanberra-gtk-module

[Roberto Pontecorvi]

non capisco se ha reinstallato la vecchia versione 3.20.5.

Si hai reinstallato la 3.20.... Se leggi con attenzione la risposta del comando -> hp-doctor, vedi che viene menzionato hplip3.20... Elimina tutti i pacchetti di hplip con il seguente comando:

Codice: Seleziona tutto

sudo apt --purge remove hplip*

Anche se l'installazione di hplip3.22.. li elimina in automatico. Fatta pulizia avvia hplip3.22.10, basta cliccarci due volte sopra con il mouse. Durante l'installazione ti chiede se vuoi installare i plugin, tu rispondi di si.

[frap]

ciao a tutti

Forse hai saltato l'installazione dei plugin o la password è sbagliata CHI LO SA, LA PW È SEMPRE LA STESSA
Eri connesso ad Internet? SI

risposta a dpkg -l | grep hplip

Codice: Seleziona tutto

frapponzio@fraptop:~$ dpkg -l | grep hplip
ii  hplip                                      3.20.3+dfsg0-2                          amd64        HP Linux Printing and Imaging System (HPLIP)
ii  hplip-data                                 3.20.3+dfsg0-2                          all          HP Linux Printing and Imaging - data files

sudo apt update

Codice: Seleziona tutto

sudo apt update
Trovato:1 http://archive.ubuntu.com/ubuntu focal InRelease
Trovato:2 http://archive.canonical.com/ubuntu focal InRelease
Trovato:3 http://archive.ubuntu.com/ubuntu focal-updates InRelease
Trovato:4 http://archive.ubuntu.com/ubuntu focal-backports InRelease
Trovato:5 http://archive.ubuntu.com/ubuntu focal-security InRelease
Lettura elenco dei pacchetti... Fatto
Generazione albero delle dipendenze       
Lettura informazioni sullo stato... Fatto
1 pacchetto può essere aggiornato: eseguire "apt list --upgradable" per vederlo.
frapponzio@fraptop:~$ apt list --upgradable
Elencazione... Fatto
distro-info-data/focal-updates,focal-updates 0.43ubuntu1.12 all [aggiornabile da: 0.43ubuntu1.11]
N: Ci sono 3 versioni aggiuntive: usare "-a" per visualizzarle
frapponzio@fraptop:~$ -a
-a: comando non trovato

con questi ultimi focal updates...non so come comportarmi!

sudo apt install libcanberra-gtk-module eseguito con successo

Poi...apt --purge remove hplip*

Codice: Seleziona tutto

sudo apt --purge remove hplip*
Lettura elenco dei pacchetti... Fatto
Generazione albero delle dipendenze       
Lettura informazioni sullo stato... Fatto
Nota, viene selezionato "hplip-data" per l'espressione glob "hplip*"
Nota, viene selezionato "hplip" per l'espressione glob "hplip*"
Nota, viene selezionato "hplip-doc" per l'espressione glob "hplip*"
Nota, viene selezionato "hplip-gui" per l'espressione glob "hplip*"
Nota, viene selezionato "hplip-cups" per l'espressione glob "hplip*"
Nota, viene selezionato "hplip-ppds" per l'espressione glob "hplip*"
Il pacchetto "hplip-cups" non è installato e quindi non è stato rimosso
Nota, viene selezionato "hpijs-ppds" al posto di "hplip-ppds"
Il pacchetto "hplip-doc" non è installato e quindi non è stato rimosso
Il pacchetto "hplip-gui" non è installato e quindi non è stato rimosso
I seguenti pacchetti sono stati installati automaticamente e non sono più richiesti:
  gir1.2-goa-1.0 libfwupdplugin1 libhpmud0 libimagequant0 libllvm11 libsane-hpaio libxmlb1 printer-driver-hpcups printer-driver-postscript-hp
  python3-olefile python3-pil python3-renderpm python3-reportlab python3-reportlab-accel shim
Usare "sudo apt autoremove" per rimuoverli.
I seguenti pacchetti saranno RIMOSSI:
  hplip* hplip-data*
0 aggiornati, 0 installati, 2 da rimuovere e 1 non aggiornati.
Dopo quest'operazione, verranno liberati 11,0 MB di spazio su disco.
Continuare? [S/n] s
(Lettura del database... 213183 file e directory attualmente installati.)
Rimozione di hplip (3.20.3+dfsg0-2)...
Rimozione di hplip-data (3.20.3+dfsg0-2)...
dpkg: attenzione: nel rimuovere hplip-data, la directory "/usr/share/hplip/ui5" è risultata non vuota e non viene rimossa
dpkg: attenzione: nel rimuovere hplip-data, la directory "/usr/share/hplip/prnt" è risultata non vuota e non viene rimossa
dpkg: attenzione: nel rimuovere hplip-data, la directory "/usr/share/hplip/installer" è risultata non vuota e non viene rimossa
dpkg: attenzione: nel rimuovere hplip-data, la directory "/usr/share/hplip/base/pexpect" è risultata non vuota e non viene rimossa
Elaborazione dei trigger per dbus (1.12.16-2ubuntu2.3)...
Elaborazione dei trigger per man-db (2.9.1-1)...
(Lettura del database... 212562 file e directory attualmente installati.)
Eliminazione dei file di configurazione di hplip (3.20.3+dfsg0-2)...
Elaborazione dei trigger per dbus (1.12.16-2ubuntu2.3)...

spero che queste directory che non vengono rimosse non siano un problema per l'installazione a venire...

hplip3.22.10 avviato, durante l'installazione mi dice che ci sono alcuni caratteri non riconosciuti all'interno del file. mi chiede se voglio cambiare la policy di lettura (ma attenzione, il documento potrebbe risultare inutilizzabile). Cambio da "locale" a "occidentale" (non ricordo piu le sigle esatte), gli dico di riprovare, e attualmente "Editor di testo non risponde", dopo aver ravanato per qualche minuto

Spero che un angelo custode linux-decoder appaia in linea prima di mezzodì per evitarmi di cliccare ancora sul pulsante sbagliato....

[frap]

Provato con UNICODE:

ci riprovo dicendo "modifica lo stesso"....alla peggio lo scarico di nuovo ma da un'altra source?! è forse un errore nel file?

[frap]

Bho, l'installazione è ferma e si presenta piu o meno tutta così:

ne deduco che la modifica non è riuscita....

Vabbè, anche stavolta non è andata. Se riesco a riconnettermi stasera provo a scaricare di nuovo hplip-3.22.10-plugin.run e reinstallarlo.
Grazie per il vostro aiuto...passato e futuro

[magozurlinux]

Da quelle foto non si capisce nulla!

Se hplip scaricato é nella cartella Scaricati, da terminale connesso ad Internet dai questi xomandi:

Codice: Seleziona tutto

cd ~/Scaricati

Codice: Seleziona tutto

sh hplip-3.22.10.run

Segui le istruzioni a video.

[Roberto Pontecorvi]

Prova a portare il file hplip dalla directory "Scaricati" alla tua home e dargli i permessi di esecuzione come programma e poi lo avvi.

[frap]

ciao
ho riprovato a installare la versione 3.22.10 da Scaricati, prima di spostarla. Aparentemente, stavolta ha funzionato (ho risposto YES al buon momento!).
Provo ad aprire lo scanner, mi dice che servono i plug-in, provo a scaricarli cliccando "next" dalla schermata

Risultati da terminale:

Codice: Seleziona tutto

frapponzio@fraptop:~/Scaricati$ 
HP Linux Imaging and Printing System (ver. 3.22.10)
Diagnose Plugin Utility ver. 1.0

Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.


HP Linux Imaging and Printing System (ver. 3.22.10)
Plugin Download and Install Utility ver. 2.1

Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.


HP Linux Imaging and Printing System (ver. 3.22.10)
Plugin Download and Install Utility ver. 2.1

Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

Checking for network connection...
Downloading plug-in from: 
Traceback (most recent call last):
  File "/usr/share/hplip/base/utils.py", line 2519, in get_distro_name
    name = platform.dist()[0].lower()
AttributeError: module 'platform' has no attribute 'dist'

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/usr/share/hplip/ui5/plugindialog.py", line 248, in NextButton_clicked
    status, download_plugin_file, error_str = self.pluginObj.download(self.plugin_path,self.plugin_download_callback)
  File "/usr/share/hplip/installer/pluginhandler.py", line 257, in download
    core = core_install.CoreInstall()
  File "/usr/share/hplip/installer/core_install.py", line 241, in __init__
    self.passwordObj = password.Password(ui_mode)
  File "/usr/share/hplip/base/password.py", line 106, in __init__
    self.__readAuthType()  # self.__authType
  File "/usr/share/hplip/base/password.py", line 129, in __readAuthType
    (os_name,_ver) = utils.get_distro_name() #.lower().replace(" ","")
  File "/usr/share/hplip/base/utils.py", line 2523, in get_distro_name
    name = distro.linux_distribution()[0].lower()
  File "/usr/lib/python3/dist-packages/distro.py", line 122, in linux_distribution
    return _distro.linux_distribution(full_distribution_name)
  File "/usr/lib/python3/dist-packages/distro.py", line 677, in linux_distribution
    self.version(),
  File "/usr/lib/python3/dist-packages/distro.py", line 737, in version
    self.lsb_release_attr('release'),
  File "/usr/lib/python3/dist-packages/distro.py", line 899, in lsb_release_attr
    return self._lsb_release_info.get(attribute, '')
  File "/usr/lib/python3/dist-packages/distro.py", line 552, in __get__
    ret = obj.__dict__[self._fname] = self._f(obj)
  File "/usr/lib/python3/dist-packages/distro.py", line 1012, in _lsb_release_info
    stdout = subprocess.check_output(cmd, stderr=devnull)
  File "/usr/lib/python3.8/subprocess.py", line 415, in check_output
    return run(*popenargs, stdout=PIPE, timeout=timeout, check=True,
  File "/usr/lib/python3.8/subprocess.py", line 516, in run
    raise CalledProcessError(retcode, process.args,
subprocess.CalledProcessError: Command '('lsb_release', '-a')' returned non-zero exit status 1.
Error in sys.excepthook:
Traceback (most recent call last):
  File "/usr/lib/python3/dist-packages/apport_python_hook.py", line 72, in apport_excepthook
    from apport.fileutils import likely_packaged, get_recent_crashes
  File "/usr/lib/python3/dist-packages/apport/__init__.py", line 5, in <module>
    from apport.report import Report
  File "/usr/lib/python3/dist-packages/apport/report.py", line 32, in <module>
    import apport.fileutils
  File "/usr/lib/python3/dist-packages/apport/fileutils.py", line 12, in <module>
    import os, glob, subprocess, os.path, time, pwd, sys, requests_unixsocket
  File "/usr/lib/python3/dist-packages/requests_unixsocket/__init__.py", line 1, in <module>
    import requests
  File "/usr/lib/python3/dist-packages/requests/__init__.py", line 95, in <module>
    from urllib3.contrib import pyopenssl
  File "/usr/lib/python3/dist-packages/urllib3/contrib/pyopenssl.py", line 46, in <module>
    import OpenSSL.SSL
  File "/usr/lib/python3/dist-packages/OpenSSL/__init__.py", line 8, in <module>
    from OpenSSL import crypto, SSL
  File "/usr/lib/python3/dist-packages/OpenSSL/crypto.py", line 1553, in <module>
    class X509StoreFlags(object):
  File "/usr/lib/python3/dist-packages/OpenSSL/crypto.py", line 1573, in X509StoreFlags
    CB_ISSUER_CHECK = _lib.X509_V_FLAG_CB_ISSUER_CHECK
AttributeError: module 'lib' has no attribute 'X509_V_FLAG_CB_ISSUER_CHECK'

Original exception was:
Traceback (most recent call last):
  File "/usr/share/hplip/base/utils.py", line 2519, in get_distro_name
    name = platform.dist()[0].lower()
AttributeError: module 'platform' has no attribute 'dist'

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/usr/share/hplip/ui5/plugindialog.py", line 248, in NextButton_clicked
    status, download_plugin_file, error_str = self.pluginObj.download(self.plugin_path,self.plugin_download_callback)
  File "/usr/share/hplip/installer/pluginhandler.py", line 257, in download
    core = core_install.CoreInstall()
  File "/usr/share/hplip/installer/core_install.py", line 241, in __init__
    self.passwordObj = password.Password(ui_mode)
  File "/usr/share/hplip/base/password.py", line 106, in __init__
    self.__readAuthType()  # self.__authType
  File "/usr/share/hplip/base/password.py", line 129, in __readAuthType
    (os_name,_ver) = utils.get_distro_name() #.lower().replace(" ","")
  File "/usr/share/hplip/base/utils.py", line 2523, in get_distro_name
    name = distro.linux_distribution()[0].lower()
  File "/usr/lib/python3/dist-packages/distro.py", line 122, in linux_distribution
    return _distro.linux_distribution(full_distribution_name)
  File "/usr/lib/python3/dist-packages/distro.py", line 677, in linux_distribution
    self.version(),
  File "/usr/lib/python3/dist-packages/distro.py", line 737, in version
    self.lsb_release_attr('release'),
  File "/usr/lib/python3/dist-packages/distro.py", line 899, in lsb_release_attr
    return self._lsb_release_info.get(attribute, '')
  File "/usr/lib/python3/dist-packages/distro.py", line 552, in __get__
    ret = obj.__dict__[self._fname] = self._f(obj)
  File "/usr/lib/python3/dist-packages/distro.py", line 1012, in _lsb_release_info
    stdout = subprocess.check_output(cmd, stderr=devnull)
  File "/usr/lib/python3.8/subprocess.py", line 415, in check_output
    return run(*popenargs, stdout=PIPE, timeout=timeout, check=True,
  File "/usr/lib/python3.8/subprocess.py", line 516, in run
    raise CalledProcessError(retcode, process.args,
subprocess.CalledProcessError: Command '('lsb_release', '-a')' returned non-zero exit status 1.
Checking for network connection...
Downloading plug-in from: 
Traceback (most recent call last):
  File "/usr/share/hplip/base/utils.py", line 2519, in get_distro_name
    name = platform.dist()[0].lower()
AttributeError: module 'platform' has no attribute 'dist'

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/usr/share/hplip/ui5/plugindialog.py", line 248, in NextButton_clicked
    status, download_plugin_file, error_str = self.pluginObj.download(self.plugin_path,self.plugin_download_callback)
  File "/usr/share/hplip/installer/pluginhandler.py", line 257, in download
    core = core_install.CoreInstall()
  File "/usr/share/hplip/installer/core_install.py", line 241, in __init__
    self.passwordObj = password.Password(ui_mode)
  File "/usr/share/hplip/base/password.py", line 106, in __init__
    self.__readAuthType()  # self.__authType
  File "/usr/share/hplip/base/password.py", line 129, in __readAuthType
    (os_name,_ver) = utils.get_distro_name() #.lower().replace(" ","")
  File "/usr/share/hplip/base/utils.py", line 2523, in get_distro_name
    name = distro.linux_distribution()[0].lower()
  File "/usr/lib/python3/dist-packages/distro.py", line 122, in linux_distribution
    return _distro.linux_distribution(full_distribution_name)
  File "/usr/lib/python3/dist-packages/distro.py", line 677, in linux_distribution
    self.version(),
  File "/usr/lib/python3/dist-packages/distro.py", line 737, in version
    self.lsb_release_attr('release'),
  File "/usr/lib/python3/dist-packages/distro.py", line 899, in lsb_release_attr
    return self._lsb_release_info.get(attribute, '')
  File "/usr/lib/python3/dist-packages/distro.py", line 552, in __get__
    ret = obj.__dict__[self._fname] = self._f(obj)
  File "/usr/lib/python3/dist-packages/distro.py", line 1012, in _lsb_release_info
    stdout = subprocess.check_output(cmd, stderr=devnull)
  File "/usr/lib/python3.8/subprocess.py", line 415, in check_output
    return run(*popenargs, stdout=PIPE, timeout=timeout, check=True,
  File "/usr/lib/python3.8/subprocess.py", line 516, in run
    raise CalledProcessError(retcode, process.args,
subprocess.CalledProcessError: Command '('lsb_release', '-a')' returned non-zero exit status 1.
Error in sys.excepthook:
Traceback (most recent call last):
  File "/usr/lib/python3/dist-packages/apport_python_hook.py", line 72, in apport_excepthook
    from apport.fileutils import likely_packaged, get_recent_crashes
  File "/usr/lib/python3/dist-packages/apport/__init__.py", line 5, in <module>
    from apport.report import Report
  File "/usr/lib/python3/dist-packages/apport/report.py", line 32, in <module>
    import apport.fileutils
  File "/usr/lib/python3/dist-packages/apport/fileutils.py", line 12, in <module>
    import os, glob, subprocess, os.path, time, pwd, sys, requests_unixsocket
  File "/usr/lib/python3/dist-packages/requests_unixsocket/__init__.py", line 1, in <module>
    import requests
  File "/usr/lib/python3/dist-packages/requests/__init__.py", line 95, in <module>
    from urllib3.contrib import pyopenssl
  File "/usr/lib/python3/dist-packages/urllib3/contrib/pyopenssl.py", line 46, in <module>
    import OpenSSL.SSL
  File "/usr/lib/python3/dist-packages/OpenSSL/__init__.py", line 8, in <module>
    from OpenSSL import crypto, SSL
  File "/usr/lib/python3/dist-packages/OpenSSL/crypto.py", line 1553, in <module>
    class X509StoreFlags(object):
  File "/usr/lib/python3/dist-packages/OpenSSL/crypto.py", line 1573, in X509StoreFlags
    CB_ISSUER_CHECK = _lib.X509_V_FLAG_CB_ISSUER_CHECK
AttributeError: module 'lib' has no attribute 'X509_V_FLAG_CB_ISSUER_CHECK'

Original exception was:
Traceback (most recent call last):
  File "/usr/share/hplip/base/utils.py", line 2519, in get_distro_name
    name = platform.dist()[0].lower()
AttributeError: module 'platform' has no attribute 'dist'

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/usr/share/hplip/ui5/plugindialog.py", line 248, in NextButton_clicked
    status, download_plugin_file, error_str = self.pluginObj.download(self.plugin_path,self.plugin_download_callback)
  File "/usr/share/hplip/installer/pluginhandler.py", line 257, in download
    core = core_install.CoreInstall()
  File "/usr/share/hplip/installer/core_install.py", line 241, in __init__
    self.passwordObj = password.Password(ui_mode)
  File "/usr/share/hplip/base/password.py", line 106, in __init__
    self.__readAuthType()  # self.__authType
  File "/usr/share/hplip/base/password.py", line 129, in __readAuthType
    (os_name,_ver) = utils.get_distro_name() #.lower().replace(" ","")
  File "/usr/share/hplip/base/utils.py", line 2523, in get_distro_name
    name = distro.linux_distribution()[0].lower()
  File "/usr/lib/python3/dist-packages/distro.py", line 122, in linux_distribution
    return _distro.linux_distribution(full_distribution_name)
  File "/usr/lib/python3/dist-packages/distro.py", line 677, in linux_distribution
    self.version(),
  File "/usr/lib/python3/dist-packages/distro.py", line 737, in version
    self.lsb_release_attr('release'),
  File "/usr/lib/python3/dist-packages/distro.py", line 899, in lsb_release_attr
    return self._lsb_release_info.get(attribute, '')
  File "/usr/lib/python3/dist-packages/distro.py", line 552, in __get__
    ret = obj.__dict__[self._fname] = self._f(obj)
  File "/usr/lib/python3/dist-packages/distro.py", line 1012, in _lsb_release_info
    stdout = subprocess.check_output(cmd, stderr=devnull)
  File "/usr/lib/python3.8/subprocess.py", line 415, in check_output
    return run(*popenargs, stdout=PIPE, timeout=timeout, check=True,
  File "/usr/lib/python3.8/subprocess.py", line 516, in run
    raise CalledProcessError(retcode, process.args,
subprocess.CalledProcessError: Command '('lsb_release', '-a')' returned non-zero exit status 1.

(forse ho dato il comando due volte...)

[frap]

l'installazione 3.22.10 da terminale

Codice: Seleziona tutto

frapponzio@fraptop:~/Scaricati$ sh hplip-3.22.10.run
Creating directory hplip-3.22.10
Verifying archive integrity...  100%   All good.
Uncompressing HPLIP 3.22.10 Self Extracting Archive  100%  

HP Linux Imaging and Printing System (ver. 3.22.10)
HPLIP Installer ver. 5.1

Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

Installer log saved in: hplip-install_Thu-06-Apr-2023_07:41:53.log

-
note: Defaults for each question are maked with a '*'. Press <enter> to accept the default.
 

INSTALLATION MODE
-----------------
Automatic mode will install the full HPLIP solution with the most common options.
Custom mode allows you to choose installation options to fit specific requirements.

Please choose the installation mode (a=automatic*, c=custom, q=quit) : 


INTRODUCTION
------------
This installer will install HPLIP version 3.22.10 on your computer.
Please close any running package management systems now (YaST, Adept, Synaptic, Up2date, etc).


DISTRO/OS CONFIRMATION
----------------------
Distro appears to be Ubuntu 20.04.

Is "Ubuntu 20.04" your correct distro/OS and version (y=yes*, n=no, q=quit) ? y

Initializing. Please wait...


ENTER USER PASSWORD
-------------------
Please enter the sudoer (frapponzio)'s password: 
 

INSTALLATION NOTES
------------------
Enable the universe/multiverse repositories. Also be sure you are using the Ubuntu "Main" Repositories. See: https://help.ubuntu.com/community/Repositories/Ubuntu for more information.  Disable the CD-ROM/DVD source if you do not have the Ubuntu installation media inserted in the drive.

Please read the installation notes. Press <enter> to continue or 'q' to quit: 


SECURITY PACKAGES
-----------------
AppArmor is installed. 
AppArmor protects the application from external intrusion attempts making the application secure

Would you like to have this installer install the hplip specific policy/profile (y=yes*, n=no, q=quit) ? 


RUNNING PRE-INSTALL COMMANDS
----------------------------
OK


RUNNING HPLIP LIBS REMOVE COMMANDS
----------------------------------
sudo apt-get remove libhpmud0 libsane-hpaio printer-driver-postscript-hp
sudo apt-get remove libhpmud0 libsane-hpaio printer-driver-postscript-hp ( hp_libs_remove step 1)
OK


MISSING DEPENDENCIES
--------------------
Following dependencies are not installed. HPLIP will not work if all REQUIRED dependencies are not installed and some of the HPLIP features will not work if OPTIONAL dependencies are not installed.
Package-Name         Component            Required/Optional   
libavahi-dev         scan                 REQUIRED            
Do you want to install these missing dependencies (y=yes*, n=no, q=quit) ? 


INSTALL MISSING REQUIRED DEPENDENCIES
-------------------------------------
note: Installation of dependencies requires an active internet connection.
warning: Missing REQUIRED dependency: libavahi-dev (libavahi-dev)


CHECKING FOR NETWORK CONNECTION
-------------------------------
Network connection present.


RUNNING PRE-PACKAGE COMMANDS
----------------------------
sudo dpkg --configure -a (Pre-depend step 1)
sudo apt-get install --yes --force-yes -f (Pre-depend step 2)
sudo apt-get update (Pre-depend step 3)
OK


DEPENDENCY AND CONFLICT RESOLUTION
----------------------------------
Running 'sudo apt-get install --assume-yes libavahi-client-dev'
Please wait, this may take several minutes...
Running 'sudo apt-get install --assume-yes libavahi-core-dev'
Please wait, this may take several minutes...
Running 'sudo apt-get install --assume-yes libavahi-common-dev'
Please wait, this may take several minutes...
HPLIP-3.20.5 exists, this may conflict with the new one being installed.
Do you want to ('i'= Remove and Install*, 'q'= Quit)?    :
Starting uninstallation...
HPLIP uninstallation is completed


RUNNING POST-PACKAGE COMMANDS
-----------------------------
OK


RE-CHECKING DEPENDENCIES
------------------------
OK


RUNNING SCANJET DEPENDENCY COMMANDS
-----------------------------------
sudo apt-get install --assume-yes python3-pip (Scanjet-depend step 1)
sudo pip3 install --upgrade pip (Scanjet-depend step 2)
sudo apt-get install --assume-yes libleptonica-dev (Scanjet-depend step 3)
sudo apt-get install --assume-yes tesseract-ocr (Scanjet-depend step 4)
sudo apt-get install --assume-yes libtesseract-dev (Scanjet-depend step 5)
sudo -H pip3 install tesserocr (Scanjet-depend step 6)
sudo -H pip3 install opencv-python (Scanjet-depend step 7)
sudo -H pip3 install PyPDF2 (Scanjet-depend step 8)
sudo -H pip3 install imutils (Scanjet-depend step 9)
sudo -H pip3 install ocrmypdf (Scanjet-depend step 10)
sudo -H pip3 install scikit-image (Scanjet-depend step 11)
sudo -H pip3 install scipy (Scanjet-depend step 12)
sudo apt-get install --assume-yes qpdf (Scanjet-depend step 13)
OK


PRE-BUILD COMMANDS
------------------
OK


BUILD AND INSTALL
-----------------
Running './configure --with-hpppddir=/usr/share/ppd/HP --libdir=/usr/lib --prefix=/usr --enable-network-build --enable-scan-build --enable-fax-build --enable-dbus-build --disable-qt4 --enable-qt5 --disable-class-driver --enable-doc-build --disable-policykit --disable-libusb01_build --disable-udev_sysfs_rules --enable-hpcups-install --disable-hpijs-install --disable-foomatic-ppd-install --disable-foomatic-drv-install --disable-cups-ppd-install --enable-cups-drv-install --enable-apparmor_build'
Please wait, this may take several minutes...
Command completed successfully.

Running 'make clean'
Please wait, this may take several minutes...
Command completed successfully.

Running 'make'
Please wait, this may take several minutes...
Command completed successfully.

Running 'sudo make install'
Please wait, this may take several minutes...
Command completed successfully.


Build complete.



POST-BUILD COMMANDS
-------------------
 

CLOSE HP_SYSTRAY
----------------
Sending close message to hp-systray (if it is currently running)...
OK


HPLIP UPDATE NOTIFICATION
-------------------------
Do you want to check for HPLIP updates?. (y=yes*, n=no) : 


RESTART OR RE-PLUG IS REQUIRED
------------------------------
If you are installing a USB connected printer, and the printer was plugged in when you started this installer, you will 
need to either restart your PC or unplug and re-plug in your printer (USB cable only). If you choose to restart, run    
this command after restarting: hp-setup (Note: If you are using a parallel connection, you will have to restart your PC.
If you are using network/wireless, you can ignore and continue).                                                        

Restart or re-plug in your printer (r=restart, p=re-plug in*, i=ignore/continue, q=quit) : 
Please unplug and re-plugin your printer now.  Press <enter> to continue or 'q' to quit: 


PRINTER SETUP
-------------
Please make sure your printer is connected and powered on at this time.
Do you want to setup printer in GUI mode? (u=GUI mode*, i=Interactive mode) : 

HP Linux Imaging and Printing System (ver. 3.22.10)
Printer/Fax Setup Utility ver. 9.0

Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

Searching... (bus=usb, search=(None), desc=0)
 
Done.


RE-STARTING HP_SYSTRAY
----------------------

HP Linux Imaging and Printing System (ver. 3.22.10)
System Tray Status Service ver. 2.0

Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

[frap]

Da quelle foto non si capisce nulla!

Scusa, ma lo screenshot in dimensione originale era troppo grande da caricare sul forum, ho dovuto ridurlo....se necessario posso postare tutto in copy/paste

[frap]

ci riprovo. ho spostato hplip nella home, permesso come programma, avviato, ma mi da sempre questo errore di lingua:

l'installazione arriva fino alla linea 226228, poi si ferma. se cerco di copiare tutto l'editor di testo non risponde. non saprei come altro condividerlo...

[frap]

scusate, qui si vedono le 3 opzioni dell'editor di testo per risolvere il problema (riprova con altra codifica - modifica lo stesso -X)

[magozurlinux]

Se l'hai installato, perché reinstallarlo?

da terminale postami questo comando:

Codice: Seleziona tutto

dpkg -l | grep hplip

[frap]

Se l'hai installato, perché reinstallarlo? NON LO SO...PERCHÉ LE STO PROVANDO TUTTE?! a volte siamo i peggiori nemici di noi stessi

Sono connessa a internet, stampante accesa e collegata al pc, ma il comando "dpkg -l | grep hplip" non da nessuna risposta....se ho ben capito il comando cerca hplip in una directory? ho dato il comando sia nella home che in scaricati. Forse lo cerca nel file dell'Editor di Testo? È ancora aperto e bloccato sulla domanda relativa alla codifica dei caratteri, e non me lo fa salvare (nemmeno con "salva tutti"). Bho, io ipotizzo...

Codice: Seleziona tutto

frapponzio@fraptop:~$ dpkg -l | grep hplip
frapponzio@fraptop:~$ cd ~/Scaricati
frapponzio@fraptop:~/Scaricati$ dpkg -l | grep hplip
frapponzio@fraptop:~/Scaricati$