Pagina 1 di 1

alfa awuso36H kismet

Inviato: domenica 20 maggio 2007, 16:39
da top900
Ho sostituito la wifi usb con una alfa AWUSO36H e non riesco a riconfigurare kismet la chiave wifi monta drivers rtl8187 il risultato del comando e' il seguente

Codice: Seleziona tutto

ubuntu@ubuntu-laptop:~$ sudo kismet
Server options:  none
Client options:  none
Starting server...
Waiting for server to start before starting UI...
Suid priv-dropping disabled.  This may not be secure.
No specific sources given to be enabled, all will be enabled.
Enabling channel hopping.
Enabling channel splitting.
FATAL: Unknown capture source type 'rtl8187' in source 'rtl8187,wlan0,rtl8187'
[1] + Done(1)                    ${BIN}/kismet_server --silent ${server}
ubuntu@ubuntu-laptop:~$ 
il file kismet.conf e' stato configurato nel modo seguente

Codice: Seleziona tutto

# Sources are defined as:
# source=sourcetype,interface,name[,initialchannel]
# Source types and required drivers are listed in the README under the
# CAPTURE SOURCES section.
# The initial channel is optional, if hopping is not enabled it can be used
# to set the channel the interface listens on.
# YOU MUST CHANGE THIS TO BE THE SOURCE YOU WANT TO USE
source=rtl8187,wlan0,rtl8187
# Comma-separated list of sources to enable.  This is only needed if you defined
# multiple sources and only want to enable some of them.  By default, all defined
# sources are enabled.
# For example:
# enablesources=rtl8187
ma non funziona ???

Re: alfa awuso36H kismet

Inviato: domenica 20 maggio 2007, 17:23
da top900
qualcuno ha configurato kismet con i drivers realtek  ::) cosa devo scrivere help me :'(

Re: alfa awuso36H kismet

Inviato: domenica 20 maggio 2007, 21:59
da top900
Ragazzi ho bisogno del vostro aiuto,non sono in grado di risolvere questo problema da solo,qualcuno usa i drivers rtl8187,grazie :(

Re: alfa awuso36H kismet

Inviato: lunedì 21 maggio 2007, 21:07
da top900
help.....me...... :'(

Re: alfa awuso36H kismet

Inviato: giovedì 24 maggio 2007, 23:10
da top900
Nelle spiegazioni di kismet i driver rtl8187 non sono presenti , se qualcuno usa i miei stessi driver lo prego di indicarmi come settare il fili kismet.conf  :(

Re: alfa awuso36H kismet

Inviato: giovedì 24 maggio 2007, 23:20
da kripstall
in kismet.conf

source=rt8180,wlan0,rt8187

ho anche io questo usb

by

Re: alfa awuso36H kismet

Inviato: venerdì 1 giugno 2007, 23:30
da top900
ciao kripstal finalmente qualcuno che ha la mia alfa

Codice: Seleziona tutto

ubuntu@ubuntu-laptop:~$ sudo kismet
Server options:  none
Client options:  none
Starting server...
Waiting for server to start before starting UI...
Suid priv-dropping disabled.  This may not be secure.
No specific sources given to be enabled, all will be enabled.
Enabling channel hopping.
Enabling channel splitting.
Source 0 (rt8187): Enabling monitor mode for rt8180 source interface wlan0 channel 6...
FATAL: Failed to set monitor mode: Device or resource busy.  This usually means your drivers either do not support monitor mode, or use a different mechanism for getting to it.  Make sure you have a version of your drivers that support monitor mode, and consult the troubleshooting section of the README.
[1] + Done(1)                    ${BIN}/kismet_server --silent ${server}
ubuntu@ubuntu-laptop:~$ sudo gedit /etc/kismet/kismet.conf
ubuntu@ubuntu-laptop:~$ sudo kismet
Server options:  none
Client options:  none
Starting server...
Waiting for server to start before starting UI...
Suid priv-dropping disabled.  This may not be secure.
No specific sources given to be enabled, all will be enabled.
Enabling channel hopping.
Enabling channel splitting.
Source 0 (rt8187): Enabling monitor mode for rt8180 source interface wlan0 channel 6...
FATAL: Failed to set monitor mode: Device or resource busy.  This usually means your drivers either do not support monitor mode, or use a different mechanism for getting to it.  Make sure you have a version of your drivers that support monitor mode, and consult the troubleshooting section of the README.
[1] + Done(1)                    ${BIN}/kismet_server --silent ${server}
ubuntu@ubuntu-laptop:~$ 

non funge puoi aiutarmi  ???

Re: alfa awuso36H kismet

Inviato: venerdì 1 giugno 2007, 23:32
da top900
ti posto il file kismet.conf

Codice: Seleziona tutto

# Sources are defined as:
# source=sourcetype,interface,name[,initialchannel]
# Source types and required drivers are listed in the README under the
# CAPTURE SOURCES section.
# The initial channel is optional, if hopping is not enabled it can be used
# to set the channel the interface listens on.
# YOU MUST CHANGE THIS TO BE THE SOURCE YOU WANT TO USE
source=rt8180,wlan0,rt8187
# Comma-separated list of sources to enable.  This is only needed if you defined
# multiple sources and only want to enable some of them.  By default, all defined
# sources are enabled.
# For example:
# enablesources=rt8180
dimmi dove sbaglio grazie :(

Re: alfa awuso36H kismet

Inviato: venerdì 1 giugno 2007, 23:43
da top900
questo e' il risultato :'(

Codice: Seleziona tutto

ubuntu@ubuntu-laptop:~$ sudo kismet
Server options:  none
Client options:  none
Starting server...
Waiting for server to start before starting UI...
Suid priv-dropping disabled.  This may not be secure.
No specific sources given to be enabled, all will be enabled.
Enabling channel hopping.
Enabling channel splitting.
Source 0 (rt8187): Enabling monitor mode for rt8180 source interface wlan0 channel 6...
FATAL: Failed to set monitor mode: Device or resource busy.  This usually means your drivers either do not support monitor mode, or use a different mechanism for getting to it.  Make sure you have a version of your drivers that support monitor mode, and consult the troubleshooting section of the README.
[1] + Done(1)                    ${BIN}/kismet_server --silent ${server}
ubuntu@ubuntu-laptop:~$ 

help me  :( ??? ::)

Re: alfa awuso36H kismet

Inviato: sabato 2 giugno 2007, 12:11
da top900
Scusa kripstall visto che hai la mia stessa wifi quale driver devo installare e come ?
In enablesources cosa devo scrivere? ??? :(

Re: alfa awuso36H kismet

Inviato: domenica 3 giugno 2007, 11:47
da top900
Ragazzi aiutatemi  ::) :'(

Re: alfa awuso36H kismet

Inviato: domenica 3 giugno 2007, 15:33
da top900
Chiedo un consiglio a chi possiede la mia stessa scheda (alfa awuso 36H ) per risolvere qhesto problema , ::) se non trovo la soluzione su questo forum sono  fritto... :( ho buttato via i soldi.....gulp  ... :(

Re: alfa awuso36H kismet

Inviato: giovedì 7 giugno 2007, 9:49
da top900
risolto con questi comandi in successione  : ifconfig wlan0 down ,, iwconfig wlan0 mode monitor ,, ifconfig wlan0 up e la usb e' andata in mode monitor (good)

Re: alfa awuso36H kismet

Inviato: domenica 20 giugno 2010, 11:33
da mat.gambak
kripstall ha scritto: in kismet.conf

source=rt8180,wlan0,rt8187

ho anche io questo usb

by
GRAZIE, ho risolto mettendo  source=rt8180,wlan0,rt8187!  ;)