[RISOLTO] live ubuntu non va su olidata tehom

Configurazione e uso delle versioni live di Ubuntu.
Scrivi risposta
Avatar utente
klovis86
Prode Principiante
Messaggi: 11
Iscrizione: mercoledì 19 marzo 2008, 22:32
Località: Italia

[RISOLTO] live ubuntu non va su olidata tehom

Messaggio da klovis86 »

ragazzi ciao sono nuovo del forum ma ho bazzicato già su ubuntu da qualche mese sul mio fisso di casa...
ho da poco acquistato un portatile, olidata tehom hm 1239 il quale ha preinstallato il sist oper vista...
questo pc ha:
processore core 2 duo t5250 a 1.50 ghz
RAM 2 gb ddr2
hd 160 gb sata
scheda grafica Nvidia geforce 8400 256 mb dedicati
card reader 4 in 1
mast dvdrw DL
wi fi a b g
web cam integrata
fingerprint integrato
bluetooth modem 56 k
4 usb
firewire
hdmi


scusate la super lunghezza ma il prob è che qui ubuntu non ne vuole proprio sapere di partire...
sappiate che:

-ho provato ubuntu e kubuntu 7.10 con inst grafica, da cd masterizzati anche più volte, e si blocca proprio dopo la parte in cui si completa la barra di caricamento de kernel (poi appare un cursore lampeggiante in alto che non si ferma più, mentre il lettore cd non legge più)

-ho provato wubi direttamente da vista ma appena installato mi dà lo stesso problema (dopo aver scritto qualcosa tipo initrd) si ferma con cursore lampeggiante e la spia di utiizzo del disco fisso è ferma (il pc non lavora)

-non ho provato la alternate, ma a pelle temo che mi darà esiti simili, sembra non voler caricare il resto della distro all'avvio...

cosa mi consigliate di fare?

grazie anticipatamente
Ultima modifica di klovis86 il martedì 1 aprile 2008, 11:29, modificato 1 volta in totale.
sudo apt-get install new-brain :)
Avatar utente
369
Imperturbabile Insigne
Imperturbabile Insigne
Messaggi: 3452
Iscrizione: giovedì 5 luglio 2007, 15:02
Località: Napoli
Contatti:

Re: [Boot] live ubuntu non va su olidata tehom

Messaggio da 369 »

nel bios come sequenza di boot cosa hai impostato?
ma vuoi farlo partire da pc spento o da emulatore?
Avatar utente
klovis86
Prode Principiante
Messaggi: 11
Iscrizione: mercoledì 19 marzo 2008, 22:32
Località: Italia

[Boot] Re: [Boot] live ubuntu non va su olidata tehom

Messaggio da klovis86 »

aggiornamento...
scusate la mia niubbistica  :) , ma sono riuscito a fare qualcosa anche se non so bene ancora come...
dunque mi sono andato a leggere la guida premendo f1 ed ho impostato alcuni parametri, per la precisione:

noapic nolapic e acpi=off ho provato solo con i primi 2 e si blocca solo col secondo e comincia a fare quacosa ma poi si blocca pure...
con tutti etre inseriti è partita una live decente  (good)...

tuttavia, in quanto niubbo non ho idea di cosa ho fatto con sti comandi, se c'è quindi qualcuno in grado di chiarirmi le idee in merito sarebbe l'ideale: a che servono di preciso?
369 ha scritto: nel bios come sequenza di boot cosa hai impostato?
ma vuoi farlo partire da pc spento o da emulatore?
1-il boot è sistemato come dovrebbe ovvero prima drive ottico poi hdd.
2-l'ideale per me sarebbe una partizione di ubuntu coesistente con vista che mi permetta di usare il primo pressochè per tutto e vista per fare girare tutti i programmi eseguibili che senza winsozz non possono girare (e anche perchè devo dire che è sistemato benino ed eliminarlo adesso comprometterebbe la garanzia olidata - 2 anni)

detto questo vado a nanna, almeno la speranza di farlo girare c'è  ;D
sudo apt-get install new-brain :)
Avatar utente
klovis86
Prode Principiante
Messaggi: 11
Iscrizione: mercoledì 19 marzo 2008, 22:32
Località: Italia

[Boot] Re: [Boot] live ubuntu non va su olidata tehom

Messaggio da klovis86 »

salve di nuovo...
essendomi interessato alla cosa ho guardato un po' in giro e ho scoperto che acpi è il modulo per le risorse energetiche del kernel, la qual cosa mi pare più che fondamentale. ora leggendo in qualche post qua e là ho scoperto che c'è il modo per riabilitarlo nel kernel, solo che una volta fatto è molto probabile che crashi tutto (del resto ci sarà pure stato un motivo se non partiva in live) e quindi kernel panic o quel che è...
mi domando allora come si può aggiungere qualcosa di simile in un sistema che non la accetta? posso io fare danni a livello hardware in questo modo? c'è qualcosa che io posso fare in modo più specifico senza essere così drastico nella rimozione?

grazie anticipatamente per le risposte.
sudo apt-get install new-brain :)
Avatar utente
klovis86
Prode Principiante
Messaggi: 11
Iscrizione: mercoledì 19 marzo 2008, 22:32
Località: Italia

Re: [Boot] live ubuntu non va su olidata tehom

Messaggio da klovis86 »

mi sono informato ancora di più ed ho scoperto che non è molto semplice sistemare il kernel: è una cosa più per addetti ai lavori. mi rivolgo a loro quindi... se sapete come fare per sistemare acpi oppure darmi qualche dritta per un'alternativa (ho letto di apm ma non ho capito bene come abilitarlo), vi prego fatevi avanti! ho paura che in questo pc non riuscirò mai ad installare ubuntu senza farlo fondere!!!!
sudo apt-get install new-brain :)
Avatar utente
sevencapitalsins
Prode Principiante
Messaggi: 162
Iscrizione: martedì 22 marzo 2005, 22:50
Località: Turin
Contatti:

Re: [Boot] live ubuntu non va su olidata tehom

Messaggio da sevencapitalsins »

Ciao, arrivo dal blog :-)

Senti, puoi postare qui l'output di lspci? (apri terminale, digita "lspci" e premi invio) --> voglio vedere se hai qualche componente che fa a pugni con il kernel (google potrà dire la risposta)

A prima vista mi sembra che sì, sia acpi a darti problemi, ma non ti reoccupare: il computer consuma di più, non si fonde mica :)
Avatar utente
klovis86
Prode Principiante
Messaggi: 11
Iscrizione: mercoledì 19 marzo 2008, 22:32
Località: Italia

Re: [Boot] live ubuntu non va su olidata tehom

Messaggio da klovis86 »

ciao!  ;D

ecco qui il log di ubuntu (ho scritto il comando dalla live):

Codice: Seleziona tutto

ubuntu@ubuntu:~$ lspci
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 03)
00:01.0 PCI bridge: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port (rev 03)
00:19.0 Ethernet controller: Intel Corporation 82566MC Gigabit Network Connection (rev 03)
00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Contoller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03)
00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3)
00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller (rev 03)
00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 03)
01:00.0 VGA compatible controller: nVidia Corporation GeForce 8400M GS (rev a1)
02:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG Network Connection (rev 02)
04:02.0 FireWire (IEEE 1394): O2 Micro, Inc. Firewire (IEEE 1394) (rev 02)
04:02.2 Generic system peripheral [0805]: O2 Micro, Inc. Integrated MMC/SD Controller (rev 01)
04:02.3 Mass storage controller: O2 Micro, Inc. Integrated MS/xD Controller (rev 01)
??? ???
sudo apt-get install new-brain :)
Avatar utente
369
Imperturbabile Insigne
Imperturbabile Insigne
Messaggi: 3452
Iscrizione: giovedì 5 luglio 2007, 15:02
Località: Napoli
Contatti:

Re: [Boot] live ubuntu non va su olidata tehom

Messaggio da 369 »

klovis86 ha scritto: mi sono informato ancora di più ed ho scoperto che non è molto semplice sistemare il kernel: è una cosa più per addetti ai lavori. mi rivolgo a loro quindi... se sapete come fare per sistemare acpi oppure darmi qualche dritta per un'alternativa (ho letto di apm ma non ho capito bene come abilitarlo), vi prego fatevi avanti! ho paura che in questo pc non riuscirò mai ad installare ubuntu senza farlo fondere!!!!
dovresti postare nella sezione adatta ai kernel e alla ricompilazione
Avatar utente
klovis86
Prode Principiante
Messaggi: 11
Iscrizione: mercoledì 19 marzo 2008, 22:32
Località: Italia

Re: [Boot] live ubuntu non va su olidata tehom

Messaggio da klovis86 »

sono d'accordo,
però penso che soltanto i moderatori possano spostare i thread...
ed in questo caso mi sembra la cosa migliore da fare :)
sudo apt-get install new-brain :)
Avatar utente
klovis86
Prode Principiante
Messaggi: 11
Iscrizione: mercoledì 19 marzo 2008, 22:32
Località: Italia

Re: [Boot] live ubuntu non va su olidata tehom

Messaggio da klovis86 »

ciao, dato che non so come ho fatto partire wubi con la hardy heron, vi posto il log del dmesg:

Codice: Seleziona tutto

[    0.000000] SELinux:  Disabled at boot.
[    0.000000] AppArmor: AppArmor initialized
[    0.000000] Failure registering capabilities with primary security module.
[    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.000000] Mount-cache hash table entries: 256
[    0.000000] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.000000] CPU: L2 cache: 2048K
[    0.000000] CPU 0/0 -> Node 0
[    0.000000] using mwait in idle threads.
[    0.000000] CPU: Physical Processor ID: 0
[    0.000000] CPU: Processor Core ID: 0
[    0.000000] CPU0: Thermal monitoring enabled (TM1)
[    0.000000] SMP alternatives: switching to UP code
[    0.000000] Freeing SMP alternatives: 24k freed
[    0.000000] Early unpacking initramfs... done
[    0.000000] Using local APIC timer interrupts.
[    0.000000] APIC timer calibration result 10391048
[    0.000000] Detected 10.391 MHz APIC timer.
[    0.000000] Brought up 1 CPUs
[    0.000000] CPU0 attaching sched-domain:
[    0.000000]  domain 0: span 01
[    0.000000]   groups: 01
[    0.000000] net_namespace: 120 bytes
[    0.000000] Time: 15:43:31  Date: 03/28/08
[    0.000000] NET: Registered protocol family 16
[    0.000000] PCI: Using configuration type 1
[    0.000000] ACPI: Interpreter disabled.
[    0.000000] Linux Plug and Play Support v0.97 (c) Adam Belay
[    0.000000] pnp: PnP ACPI: disabled
[    0.000000] PCI: Probing PCI hardware
[    0.000000] PCI: Probing PCI hardware (bus 00)
[    0.000000] PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
[    0.000000] PCI quirk: region 0500-053f claimed by ICH6 GPIO
[    0.000000] PCI: Transparent bridge - 0000:00:1e.0
[    0.000000] PCI: Using IRQ router PIIX/ICH [8086/2815] at 0000:00:1f.0
[    0.000000] NET: Registered protocol family 8
[    0.000000] NET: Registered protocol family 20
[    0.000000] PCI-GART: No AMD northbridge found.
[    0.000000] AppArmor: AppArmor Filesystem Enabled
[    0.000000] PCI: Failed to allocate mem resource #6:20000@90000000 for 0000:01:00.0
[    0.000000] PCI: Bridge: 0000:00:01.0
[    0.000000]   IO window: 3000-3fff
[    0.000000]   MEM window: 90000000-92ffffff
[    0.000000]   PREFETCH window: 80000000-8fffffff
[    0.000000] PCI: Bridge: 0000:00:1c.0
[    0.000000]   IO window: 2000-2fff
[    0.000000]   MEM window: 96100000-971fffff
[    0.000000]   PREFETCH window: 93000000-93ffffff
[    0.000000] PCI: Bridge: 0000:00:1c.1
[    0.000000]   IO window: 1000-1fff
[    0.000000]   MEM window: 95100000-960fffff
[    0.000000]   PREFETCH window: 94000000-94ffffff
[    0.000000] PCI: Bridge: 0000:00:1e.0
[    0.000000]   IO window: disabled.
[    0.000000]   MEM window: 95000000-950fffff
[    0.000000]   PREFETCH window: disabled.
[    0.000000] PCI: setting IRQ 11 as level-triggered
[    0.000000] PCI: Found IRQ 11 for device 0000:00:01.0
[    0.000000] PCI: Sharing IRQ 11 with 0000:00:1a.0
[    0.000000] PCI: Sharing IRQ 11 with 0000:00:1b.0
[    0.000000] PCI: Sharing IRQ 11 with 0000:00:1c.0
[    0.000000] PCI: Sharing IRQ 11 with 0000:00:1d.0
[    0.000000] PCI: Sharing IRQ 11 with 0000:00:1d.7
[    0.000000] PCI: Sharing IRQ 11 with 0000:01:00.0
[    0.000000] PCI: Sharing IRQ 11 with 0000:04:02.0
[    0.000000] PCI: Sharing IRQ 11 with 0000:04:02.2
[    0.000000] PCI: Sharing IRQ 11 with 0000:04:02.3
[    0.000000] PCI: Setting latency timer of device 0000:00:01.0 to 64
[    0.000000] PCI: Found IRQ 11 for device 0000:00:1c.0
[    0.000000] PCI: Sharing IRQ 11 with 0000:00:01.0
[    0.000000] PCI: Sharing IRQ 11 with 0000:00:1a.0
[    0.000000] PCI: Sharing IRQ 11 with 0000:00:1b.0
[    0.000000] PCI: Sharing IRQ 11 with 0000:00:1d.0
[    0.000000] PCI: Sharing IRQ 11 with 0000:00:1d.7
[    0.000000] PCI: Sharing IRQ 11 with 0000:01:00.0
[    0.000000] PCI: Sharing IRQ 11 with 0000:04:02.0
[    0.000000] PCI: Sharing IRQ 11 with 0000:04:02.2
[    0.000000] PCI: Sharing IRQ 11 with 0000:04:02.3
[    0.000000] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[    0.000000] PCI: Found IRQ 11 for device 0000:00:1c.1
[    0.000000] PCI: Sharing IRQ 11 with 0000:00:1a.1
[    0.000000] PCI: Sharing IRQ 11 with 0000:00:1d.1
[    0.000000] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[    0.000000] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[    0.000000] NET: Registered protocol family 2
[    0.000000] Time: tsc clocksource has been installed.
[    0.000000] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.000000] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[    0.000000] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.000000] TCP: Hash tables configured (established 262144 bind 65536)
[    0.000000] TCP reno registered
[    0.000000] checking if image is initramfs... it is
[    0.000000] Freeing initrd memory: 8208k freed
[    0.000000] audit: initializing netlink socket (disabled)
[    0.000000] audit(1206719012.376:1): initialized
[    0.000000] VFS: Disk quotas dquot_6.5.1
[    0.000000] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.000000] io scheduler noop registered
[    0.000000] io scheduler anticipatory registered
[    0.000000] io scheduler deadline registered
[    0.000000] io scheduler cfq registered (default)
[    0.000000] Boot video device is 0000:01:00.0
[    0.000000] PCI: Setting latency timer of device 0000:00:01.0 to 64
[    0.000000] assign_interrupt_mode Found MSI capability
[    0.000000] Allocate Port Service[0000:00:01.0:pcie00]
[    0.000000] Allocate Port Service[0000:00:01.0:pcie02]
[    0.000000] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[    0.000000] assign_interrupt_mode Found MSI capability
[    0.000000] Allocate Port Service[0000:00:1c.0:pcie00]
[    0.000000] Allocate Port Service[0000:00:1c.0:pcie02]
[    0.000000] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[    0.000000] assign_interrupt_mode Found MSI capability
[    0.000000] Allocate Port Service[0000:00:1c.1:pcie00]
[    0.000000] Allocate Port Service[0000:00:1c.1:pcie02]
[    0.000000] Real Time Clock Driver v1.12ac
[    0.000000] Linux agpgart interface v0.102
[    0.000000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[    0.000000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[    0.000000] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[    0.000000] PNP: No PS/2 controller found. Probing ports directly.
[    0.000000] i8042.c: Detected active multiplexing controller, rev 1.1.
[    0.000000] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.000000] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    0.000000] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    0.000000] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    0.000000] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    0.000000] mice: PS/2 mouse device common for all mice
[    0.000000] cpuidle: using governor ladder
[    0.000000] cpuidle: using governor menu
[    0.000000] NET: Registered protocol family 1
[    0.000000] registered taskstats version 1
[    0.000000]   Magic number: 0:361:741
[    0.000000] /build/buildd/linux-2.6.24/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    0.000000] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.000000] EDD information not available.
[    0.000000] Freeing unused kernel memory: 316k freed
[    0.000000] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[    0.000000] fuse init (API version 7.9)
[    0.000000] thermal: Unknown symbol acpi_processor_set_thermal_limit
[    0.000000] usbcore: registered new interface driver usbfs
[    0.000000] usbcore: registered new interface driver hub
[    0.000000] Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI
[    0.000000] Copyright (c) 1999-2006 Intel Corporation.
[    0.000000] PCI: setting IRQ 10 as level-triggered
[    0.000000] PCI: Found IRQ 10 for device 0000:00:19.0
[    0.000000] PCI: Setting latency timer of device 0000:00:19.0 to 64
[    0.000000] usbcore: registered new device driver usb
[    0.000000] e1000: 0000:00:19.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:09:df:80:4e:21
[    0.000000] USB Universal Host Controller Interface driver v3.0
[    0.000000] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
[    0.000000] PCI: Found IRQ 11 for device 0000:00:1a.0
[    0.000000] PCI: Sharing IRQ 11 with 0000:00:1b.0
[    0.000000] PCI: Sharing IRQ 11 with 0000:00:1d.0
[    0.000000] PCI: Sharing IRQ 11 with 0000:00:1d.7
[    0.000000] PCI: Sharing IRQ 11 with 0000:01:00.0
[    0.000000] PCI: Sharing IRQ 11 with 0000:04:02.0
[    0.000000] PCI: Sharing IRQ 11 with 0000:04:02.2
[    0.000000] PCI: Sharing IRQ 11 with 0000:04:02.3
[    0.000000] PCI: Setting latency timer of device 0000:00:1a.0 to 64
[    0.000000] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    0.000000] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.000000] uhci_hcd 0000:00:1a.0: irq 11, io base 0x000040c0
[    0.000000] usb usb1: configuration #1 chosen from 1 choice
[    0.000000] hub 1-0:1.0: USB hub found
[    0.000000] hub 1-0:1.0: 2 ports detected
[    0.000000] PCI: Found IRQ 11 for device 0000:00:1a.1
[    0.000000] PCI: Sharing IRQ 11 with 0000:00:1d.1
[    0.000000] PCI: Setting latency timer of device 0000:00:1a.1 to 64
[    0.000000] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    0.000000] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[    0.000000] uhci_hcd 0000:00:1a.1: irq 11, io base 0x000040a0
[    0.000000] usb usb2: configuration #1 chosen from 1 choice
[    0.000000] hub 2-0:1.0: USB hub found
[    0.000000] hub 2-0:1.0: 2 ports detected
[    0.000000] SCSI subsystem initialized
[    0.000000] PCI: Found IRQ 11 for device 0000:00:1d.0
[    0.000000] PCI: Sharing IRQ 11 with 0000:00:1a.0
[    0.000000] PCI: Sharing IRQ 11 with 0000:00:1b.0
[    0.000000] PCI: Sharing IRQ 11 with 0000:00:1d.7
[    0.000000] PCI: Sharing IRQ 11 with 0000:01:00.0
[    0.000000] PCI: Sharing IRQ 11 with 0000:04:02.0
[    0.000000] PCI: Sharing IRQ 11 with 0000:04:02.2
[    0.000000] PCI: Sharing IRQ 11 with 0000:04:02.3
[    0.000000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[    0.000000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.000000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
[    0.000000] uhci_hcd 0000:00:1d.0: irq 11, io base 0x00004080
[    0.000000] usb usb3: configuration #1 chosen from 1 choice
[    0.000000] hub 3-0:1.0: USB hub found
[    0.000000] hub 3-0:1.0: 2 ports detected
[    0.000000] PCI: Found IRQ 11 for device 0000:00:1d.1
[    0.000000] PCI: Sharing IRQ 11 with 0000:00:1a.1
[    0.000000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[    0.000000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.000000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4
[    0.000000] uhci_hcd 0000:00:1d.1: irq 11, io base 0x00004060
[    0.000000] usb usb4: configuration #1 chosen from 1 choice
[    0.000000] hub 4-0:1.0: USB hub found
[    0.000000] hub 4-0:1.0: 2 ports detected
[    0.000000] libata version 3.00 loaded.
[    0.000000] PCI: Found IRQ 11 for device 0000:00:1d.2
[    0.000000] PCI: Sharing IRQ 11 with 0000:00:1a.7
[    0.000000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[    0.000000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.000000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5
[    0.000000] uhci_hcd 0000:00:1d.2: irq 11, io base 0x00004040
[    0.000000] usb usb5: configuration #1 chosen from 1 choice
[    0.000000] hub 5-0:1.0: USB hub found
[    0.000000] hub 5-0:1.0: 2 ports detected
[    0.000000] usb 2-1: new full speed USB device using uhci_hcd and address 2
[    0.000000] PCI: Found IRQ 11 for device 0000:00:1a.7
[    0.000000] PCI: Sharing IRQ 11 with 0000:00:1d.2
[    0.000000] PCI: Setting latency timer of device 0000:00:1a.7 to 64
[    0.000000] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    0.000000] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6
[    0.000000] ehci_hcd 0000:00:1a.7: debug port 1
[    0.000000] PCI: cache line size of 32 is not supported by device 0000:00:1a.7
[    0.000000] ehci_hcd 0000:00:1a.7: irq 11, io mem 0x97225c00
[    0.000000] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[    0.000000] usb usb6: configuration #1 chosen from 1 choice
[    0.000000] hub 6-0:1.0: USB hub found
[    0.000000] hub 6-0:1.0: 4 ports detected
[    0.000000] PCI: Found IRQ 11 for device 0000:00:1d.7
[    0.000000] PCI: Sharing IRQ 11 with 0000:00:1a.0
[    0.000000] PCI: Sharing IRQ 11 with 0000:00:1b.0
[    0.000000] PCI: Sharing IRQ 11 with 0000:00:1d.0
[    0.000000] PCI: Sharing IRQ 11 with 0000:01:00.0
[    0.000000] PCI: Sharing IRQ 11 with 0000:04:02.0
[    0.000000] PCI: Sharing IRQ 11 with 0000:04:02.2
[    0.000000] PCI: Sharing IRQ 11 with 0000:04:02.3
[    0.000000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[    0.000000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    0.000000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
[    0.000000] ehci_hcd 0000:00:1d.7: debug port 1
[    0.000000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[    0.000000] ehci_hcd 0000:00:1d.7: irq 11, io mem 0x97225800
[    0.000000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[    0.000000] usb usb7: configuration #1 chosen from 1 choice
[    0.000000] hub 7-0:1.0: USB hub found
[    0.000000] hub 7-0:1.0: 6 ports detected
[    0.000000] PCI: Found IRQ 11 for device 0000:04:02.0
[    0.000000] PCI: Sharing IRQ 11 with 0000:00:1a.0
[    0.000000] PCI: Sharing IRQ 11 with 0000:00:1b.0
[    0.000000] PCI: Sharing IRQ 11 with 0000:00:1d.0
[    0.000000] PCI: Sharing IRQ 11 with 0000:00:1d.7
[    0.000000] PCI: Sharing IRQ 11 with 0000:01:00.0
[    0.000000] PCI: Sharing IRQ 11 with 0000:04:02.2
[    0.000000] PCI: Sharing IRQ 11 with 0000:04:02.3
[    0.000000] PCI: Setting latency timer of device 0000:04:02.0 to 64
[    0.000000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[11]  MMIO=[95001000-950017ff]  Max Packet=[2048]  IR/IT contexts=[8/8]
[    0.000000] ahci 0000:00:1f.2: version 3.0
[    0.000000] PCI: Found IRQ 11 for device 0000:00:1f.2
[    0.000000] PCI: Sharing IRQ 11 with 0000:00:1f.1
[    0.000000] PCI: Sharing IRQ 11 with 0000:00:1f.3
[    0.000000] ahci 0000:00:1f.2: nr_ports (3) and implemented port map (0x1) don't match, using nr_ports
[    0.000000] ahci 0000:00:1f.2: forcing PORTS_IMPL to 0x7
[    0.000000] usb 2-1: device not accepting address 2, error -71
[    0.000000] usb 6-3: new high speed USB device using ehci_hcd and address 2
[    0.000000] usb 6-3: configuration #1 chosen from 1 choice
[    0.000000] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
[    0.000000] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pmp pio slum part 
[    0.000000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[    0.000000] scsi0 : ahci
[    0.000000] scsi1 : ahci
[    0.000000] scsi2 : ahci
[    0.000000] ata1: SATA max UDMA/133 abar m2048@0x97225000 port 0x97225100 irq 508
[    0.000000] ata2: SATA max UDMA/133 abar m2048@0x97225000 port 0x97225180 irq 508
[    0.000000] ata3: SATA max UDMA/133 abar m2048@0x97225000 port 0x97225200 irq 508
[    0.000000] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00d0510000000001]
[    0.000000] usb 3-1: new low speed USB device using uhci_hcd and address 2
[    0.000000] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    0.000000] ata1.00: ATA-8: FUJITSU MHW2160BH, 0000001C, max UDMA/100
[    0.000000] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    0.000000] ata1.00: configured for UDMA/100
[    0.000000] ata2: SATA link down (SStatus 0 SControl 0)
[    0.000000] ata3: SATA link down (SStatus 0 SControl 0)
[    0.000000] scsi 0:0:0:0: Direct-Access     ATA      FUJITSU MHW2160B 0000 PQ: 0 ANSI: 5
[    0.000000] PCI: Found IRQ 11 for device 0000:00:1f.1
[    0.000000] PCI: Sharing IRQ 11 with 0000:00:1f.3
[    0.000000] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[    0.000000] ata_piix 0000:00:1f.1: version 2.12
[    0.000000] PCI: Found IRQ 11 for device 0000:00:1f.1
[    0.000000] PCI: Sharing IRQ 11 with 0000:00:1f.3
[    0.000000] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[    0.000000] scsi3 : ata_piix
[    0.000000] scsi4 : ata_piix
[    0.000000] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x4100 irq 14
[    0.000000] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x4108 irq 15
[    0.000000] Driver 'sd' needs updating - please use bus_type methods
[    0.000000] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[    0.000000] sd 0:0:0:0: [sda] Write Protect is off
[    0.000000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    0.000000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.000000] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[    0.000000] sd 0:0:0:0: [sda] Write Protect is off
[    0.000000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    0.000000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.000000]  sda: sda1 sda2
[    0.000000] sd 0:0:0:0: [sda] Attached SCSI disk
[    0.000000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    0.000000] ata4.00: ATAPI: TSSTcorp CDDVDW SN-S082H, SB00, max UDMA/33
[    0.000000] ata4.00: configured for UDMA/33
[    0.000000] scsi 3:0:0:0: CD-ROM            TSSTcorp CDDVDW SN-S082H  SB00 PQ: 0 ANSI: 5
[    0.000000] scsi 3:0:0:0: Attached scsi generic sg1 type 5
[    0.000000] Driver 'sr' needs updating - please use bus_type methods
[    0.000000] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    0.000000] Uniform CD-ROM driver Revision: 3.20
[    0.000000] sr 3:0:0:0: Attached scsi CD-ROM sr0
[    0.000000] loop: module loaded
[    0.000000] kjournald starting.  Commit interval 5 seconds
[    0.000000] EXT3-fs: mounted filesystem with ordered data mode.
[    0.000000] usb 3-1: configuration #1 chosen from 1 choice
[    0.000000] usb 4-2: new full speed USB device using uhci_hcd and address 2
[    0.000000] usb 4-2: configuration #1 chosen from 1 choice
[    0.000000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.000000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.000000] iTCO_vendor_support: vendor-support=0
[    0.000000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[    0.000000] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x0460)
[    0.000000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    0.000000] input: PC Speaker as /devices/platform/pcspkr/input/input2
[    0.000000] nvidia: module license 'NVIDIA' taints kernel.
[    0.000000] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.0
[    0.000000] iwl3945: Copyright(c) 2003-2007 Intel Corporation
[    0.000000] PCI: Setting latency timer of device 0000:02:00.0 to 64
[    0.000000] iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection
[    0.000000] sdhci: Secure Digital Host Controller Interface driver
[    0.000000] sdhci: Copyright(c) Pierre Ossman
[    0.000000] Linux video capture interface: v2.00
[    0.000000] stk11xx: Syntek USB2.0 webcam driver startup
[    0.000000] stk11xx: Syntek USB2.0 - STK-1135 based webcam found.
[    0.000000] stk11xx: Syntek AVStream USB2.0 1.3M WebCam - Product ID 0x0501.
[    0.000000] stk11xx: Release: 0005
[    0.000000] stk11xx: Number of interfaces : 1
[    0.000000] stk11xx: Initialize USB2.0 Syntek Camera
[    0.000000] stk11xx: Syntek USB2.0 Camera is ready
[    0.000000] stk11xx: Syntek USB2.0 Camera is now controlling video device /dev/video0
[    0.000000] usbcore: registered new interface driver usb_stk11xx_driver
[    0.000000] stk11xx: v1.3.1 : Syntek USB Video Camera
[    0.000000] usbcore: registered new interface driver hiddev
[    0.000000] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x9280b1, caps: 0xa04713/0x204000
[    0.000000] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio3/input/input3
[    0.000000] input: USB Mouse               as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1:1.0/input/input4
[    0.000000] input,hidraw0: USB HID v1.10 Mouse [USB Mouse              ] on usb-0000:00:1d.0-1
[    0.000000] usbcore: registered new interface driver usbhid
[    0.000000] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[    0.000000] sdhci: SDHCI controller found at 0000:04:02.2 [1217:7120] (rev 1)
[    0.000000] PCI: Found IRQ 11 for device 0000:04:02.2
[    0.000000] PCI: Sharing IRQ 11 with 0000:00:1a.0
[    0.000000] PCI: Sharing IRQ 11 with 0000:00:1b.0
[    0.000000] PCI: Sharing IRQ 11 with 0000:00:1d.0
[    0.000000] PCI: Sharing IRQ 11 with 0000:00:1d.7
[    0.000000] PCI: Sharing IRQ 11 with 0000:01:00.0
[    0.000000] PCI: Sharing IRQ 11 with 0000:04:02.0
[    0.000000] PCI: Sharing IRQ 11 with 0000:04:02.3
[    0.000000] mmc0: SDHCI at 0x95002800 irq 11 PIO
[    0.000000] PCI: Found IRQ 11 for device 0000:00:1b.0
[    0.000000] PCI: Sharing IRQ 11 with 0000:00:1a.0
[    0.000000] PCI: Sharing IRQ 11 with 0000:00:1d.0
[    0.000000] PCI: Sharing IRQ 11 with 0000:00:1d.7
[    0.000000] PCI: Sharing IRQ 11 with 0000:01:00.0
[    0.000000] PCI: Sharing IRQ 11 with 0000:04:02.0
[    0.000000] PCI: Sharing IRQ 11 with 0000:04:02.2
[    0.000000] PCI: Sharing IRQ 11 with 0000:04:02.3
[    0.000000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[    0.000000] iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels
[    0.000000] wmaster0: Selected rate control algorithm 'iwl-3945-rs'
[    0.000000] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/sound/alsa-driver/pci/hda/../../alsa-kernel/pci/hda/hda_intel.c:593: hda_intel: azx_get_response timeout, switching to polling mode: last cmd=0x000f0000
[    0.000000] hda_codec: Unknown model for ALC262, trying auto-probe from BIOS...
[    0.000000] PCI: Found IRQ 11 for device 0000:01:00.0
[    0.000000] PCI: Sharing IRQ 11 with 0000:00:1a.0
[    0.000000] PCI: Sharing IRQ 11 with 0000:00:1b.0
[    0.000000] PCI: Sharing IRQ 11 with 0000:00:1d.0
[    0.000000] PCI: Sharing IRQ 11 with 0000:00:1d.7
[    0.000000] PCI: Sharing IRQ 11 with 0000:04:02.0
[    0.000000] PCI: Sharing IRQ 11 with 0000:04:02.2
[    0.000000] PCI: Sharing IRQ 11 with 0000:04:02.3
[    0.000000] PCI: Setting latency timer of device 0000:01:00.0 to 64
[    0.000000] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  169.12  Thu Feb 14 17:51:09 PST 2008
[    0.000000] lp: driver loaded but no devices found
[    0.000000] EXT3 FS on loop0, internal journal
[    0.000000] Adding 976552k swap on /host/ubuntu/disks/swap.disk.  Priority:-1 extents:1 across:976552k
[    0.000000] ip_tables: (C) 2000-2006 Netfilter Core Team
[    0.000000] acpi_cpufreq: Unknown symbol acpi_processor_notify_smm
[    0.000000] acpi_cpufreq: Unknown symbol acpi_processor_unregister_performance
[    0.000000] acpi_cpufreq: Unknown symbol acpi_processor_preregister_performance
[    0.000000] acpi_cpufreq: Unknown symbol acpi_processor_register_performance
[    0.000000] ppdev: user-space parallel port driver
[    0.000000] Bluetooth: Core ver 2.11
[    0.000000] NET: Registered protocol family 31
[    0.000000] Bluetooth: HCI device and connection manager initialized
[    0.000000] Bluetooth: HCI socket layer initialized
[    0.000000] Bluetooth: L2CAP ver 2.9
[    0.000000] Bluetooth: L2CAP socket layer initialized
[    0.000000] Bluetooth: RFCOMM socket layer initialized
[    0.000000] Bluetooth: RFCOMM TTY layer initialized
[    0.000000] Bluetooth: RFCOMM ver 1.8
[    0.000000] NET: Registered protocol family 10
[    0.000000] lo: Disabled Privacy Extensions
[    0.000000] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] atkbd.c: Unknown key pressed (translated set 2, code 0xd6 on isa0060/serio0).
[    0.000000] atkbd.c: Use 'setkeycodes e056 <keycode>' to make it known.
[    0.000000] atkbd.c: Unknown key pressed (translated set 2, code 0xd6 on isa0060/serio0).
[    0.000000] atkbd.c: Use 'setkeycodes e056 <keycode>' to make it known.
[    0.000000] atkbd.c: Unknown key pressed (translated set 2, code 0xd6 on isa0060/serio0).
[    0.000000] atkbd.c: Use 'setkeycodes e056 <keycode>' to make it known.
[    0.000000] atkbd.c: Unknown key pressed (translated set 2, code 0xd6 on isa0060/serio0).
[    0.000000] atkbd.c: Use 'setkeycodes e056 <keycode>' to make it known.
[    0.000000] atkbd.c: Unknown key pressed (translated set 2, code 0xd6 on isa0060/serio0).
[    0.000000] atkbd.c: Use 'setkeycodes e056 <keycode>' to make it known.
[    0.000000] atkbd.c: Unknown key pressed (translated set 2, code 0xd6 on isa0060/serio0).
[    0.000000] atkbd.c: Use 'setkeycodes e056 <keycode>' to make it known.
[    0.000000] atkbd.c: Unknown key pressed (translated set 2, code 0xd6 on isa0060/serio0).
[    0.000000] atkbd.c: Use 'setkeycodes e056 <keycode>' to make it known.
[    0.000000] atkbd.c: Unknown key pressed (translated set 2, code 0xd6 on isa0060/serio0).
[    0.000000] atkbd.c: Use 'setkeycodes e056 <keycode>' to make it known.
[    0.000000] atkbd.c: Unknown key pressed (translated set 2, code 0xd6 on isa0060/serio0).
[    0.000000] atkbd.c: Use 'setkeycodes e056 <keycode>' to make it known.
[    0.000000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[    0.000000] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[    0.000000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[    0.000000] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[    0.000000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[    0.000000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[    0.000000] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[    0.000000] NET: Registered protocol family 17
[    0.000000] wlan0: Initial auth_alg=0
[    0.000000] wlan0: authenticate with AP 00:0c:f6:28:25:0e
[    0.000000] wlan0: RX authentication from 00:0c:f6:28:25:0e (alg=0 transaction=2 status=0)
[    0.000000] wlan0: authenticated
[    0.000000] wlan0: associate with AP 00:0c:f6:28:25:0e
[    0.000000] wlan0: RX AssocResp from 00:0c:f6:28:25:0e (capab=0x431 status=0 aid=1)
[    0.000000] wlan0: associated
[    0.000000] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[    0.000000] wlan0: no IPv6 routers present
[    0.000000] python[11446]: segfault at 5 rip 7f5f0c0f4f66 rsp 7fff1863bf90 error 4
[    0.000000] atkbd.c: Unknown key pressed (translated set 2, code 0xd6 on isa0060/serio0).
[    0.000000] atkbd.c: Use 'setkeycodes e056 <keycode>' to make it known.
magari può servire a qualcosa, ciao.
sudo apt-get install new-brain :)
Avatar utente
sevencapitalsins
Prode Principiante
Messaggi: 162
Iscrizione: martedì 22 marzo 2005, 22:50
Località: Turin
Contatti:

Re: [Boot] live ubuntu non va su olidata tehom

Messaggio da sevencapitalsins »

ovviamente la ricerca su google mi porta sempre a questo thread..........

1) nel kernel puoi disabilitare acpi e abilitare apm: non dovrebbe essere difficile farlo anche per un inesperto, ma non mi sembra nemmeno la soluzione migliore... CONFIG_ACPI è il parametro da disabilitare nel make x/g/menu/config del kernel.

2) http://www.lesswatts.org/projects/acpi/debug.php di cui copio e incollo la parte interessante per te (sperando che l'inglese non sia un problema)
My System Doesn't Boot

First, boot with "acpi=off" (or build with CONFIG_ACPI=n), or disable ACPI in BIOS SETUP.

    * If the same failure occurs with ACPI disabled, then that should be noted and the issue reported to the appropriate mailing list or linux-kernel@vger.kernel.org.
    * If "acpi=off" makes the failure goes away, then it is likely an ACPI bug. But if a different failure occurs with ACPI disabled, then the test was inconclusive.
    * If the system boots with "acpi=off", but fails otherwise, there are a number of boot parameters that disable different parts of ACPI that can be used to isolate where the issue lies.


      acpi=ht
          the most like "acpi=off", disables all of ACPI except what is needed to enumerate processors.
          If acpi=off works and acpi=ht fails, then the issue is in the ACPI table parsing code itself, or perhaps the SMP code.
      pci=noacpi
          Disables ACPI for PCI root bus enumeration.
          Disables ACPI for IRQ routing.
      acpi=noirq
          Disables ACPI for IRQ routing.
      pnpacpi=off
          Disables the ACPI component of the Linux Plug and Play code.
      noapic
          Disables the IO-APIC for IRQ routing.
      nolapic
          Disables the Local-APIC and the IO-APIC.
Prova questi parametri di boot e vedi un po' se riesci a isolare il problema, come suggerito dall'autore di quel documento.

Ciao
Avatar utente
klovis86
Prode Principiante
Messaggi: 11
Iscrizione: mercoledì 19 marzo 2008, 22:32
Località: Italia

Re: [Boot] live ubuntu non va su olidata tehom

Messaggio da klovis86 »

grazie per la risposta!
si l'inglese non è un problema (ho postato una domanda anche su launchpad, ma neanche lì si sono fatti sentire molto).
nella guida alla ricompilazione del kernel su debian http://guide.debianizzati.org/index.php/Debian_Kernel_howto_(aka_make-kpkg), ho trovato un collegamento interessantehttp://kmuto.jp/debian/hcl/: inserendo l'output di lspci -n dontrolla quali device sono compatibili con linux e quali no... mi chiedevo se fosse possibile attuare qualche metodica per isolare solo l'hardware non compatibile (sempre che non sia necessario per il corretto funzionamento del sistema), per poter fare partire sto benedetto acpi.

nella versione wubi che ho installato, funziona più o meno tutto, ovviamente manca del tutto il modulo acpi, ma usando envy (installer automatico driver nvdia o ati) molte cose che non andavano  bene (mouse usb lento, audio basso) si sono sistemate.
per fare definitivamente una partizione funzionante mi manca solo di abilitare acpi, cosa che reputo necessaria se non altro per il fatto che ad esempio non essendo possibile regolare la luminosità dello schermo, alla fine di una sessione lunga i cristalli liquidi fanno le bizze...

intanto ti ringrazio e farò le prove coi parametri che non ho provato (come avrai letto ho usato sia acpi=off che noapic e nolapic quando volevo far partire la live dal cd).

grazie ancora e ciao! :)
sudo apt-get install new-brain :)
Avatar utente
klovis86
Prode Principiante
Messaggi: 11
Iscrizione: mercoledì 19 marzo 2008, 22:32
Località: Italia

Re: [Boot] live ubuntu non va su olidata tehom

Messaggio da klovis86 »

aggiornamento: con la live di ubuntu 7.10 ho provato tutti i parametri segnalati da sevencapitalsins e l'unico che sembra farla partire è acpi=ht.

ho comunque trovato qualcuno che ha una sistema simile al mio (ich8, vestel bios, scheda nvidia) che ha usato come workaround la disabilitazione dei driver legacy al boot... che significa? se li disabilito rompo qualcosa? vi linko il post che ho trovato su bugs.launchpad.net.

https://bugs.launchpad.net/ubuntu/+source/debian-installer/+bug/186223
Ultima modifica di klovis86 il lunedì 31 marzo 2008, 23:51, modificato 1 volta in totale.
sudo apt-get install new-brain :)
Avatar utente
sevencapitalsins
Prode Principiante
Messaggi: 162
Iscrizione: martedì 22 marzo 2005, 22:50
Località: Turin
Contatti:

Re: [Boot] live ubuntu non va su olidata tehom

Messaggio da sevencapitalsins »

Devi accedere al BIOS e disabilitare l'USB al boot. Questo vuol dire che non potrai fare boot da un disco usb esterno (io faccio il sistemista, installo decinde di pc alla settimana ma non ho mai sfruttato il boot da usb quindi ti posso dire che è francamente inutile).

Ovviamente una volta che sarai nel sistema l'usb funzionerà (il sistema ne prenderà il controllo)
Avatar utente
klovis86
Prode Principiante
Messaggi: 11
Iscrizione: mercoledì 19 marzo 2008, 22:32
Località: Italia

Re: [RISOLTO] live ubuntu non va su olidata tehom

Messaggio da klovis86 »

finalmente!
beh disattivando i legacy và praticamente tutto...
per adesso aspetterò un po' che esca la hardy per partizionare. intanto sto facendo girare la 7.10 (con ACPI) sotto wubi.
grazie mille a chi si è interessato, se torno sarà per la hardy, ciao!
sudo apt-get install new-brain :)
Scrivi risposta

Ritorna a “Sessione live DVD/USB”

Chi c’è in linea

Visualizzano questa sezione: 0 utenti iscritti e 2 ospiti