[Internet] Internet Key USB HSPA One Touch X060S (RISOLTO)

Riconoscimento, installazione e configurazione delle periferiche.

[Internet] Internet Key USB HSPA One Touch X060S (RISOLTO)

Messaggioda CaioGiulioCesare » domenica 12 luglio 2009, 17:37

Ciao ragazzi, ieri ho comprato ad un prezzo eccezionale la Internet Key della Alcatel One Touch X060S. Nel volantino pubblicitario nonché in internet, diversi articoli asserivano la possibilità di configurarla facilmente in Linux... invece nulla..  :'(

La internet key viene vista unicamente come periferica di massa esterna...

C'è qualcuno che ha affrontato problematiche simili? Non voglio tornare a windows per connettermi ad internte...   >:(

Grazie
Ultima modifica di CaioGiulioCesare il martedì 28 luglio 2009, 15:46, modificato 1 volta in totale.
Avatar utente
CaioGiulioCesare
Prode Principiante
 
Messaggi: 37
Iscrizione: febbraio 2008
Desktop: GNOME
Distribuzione: Ubuntu

Re: [Internet] Internet Key USB HSPA One Touch X060S

Messaggioda Danx » domenica 12 luglio 2009, 22:09

di che marca è? inseriscila e dopo 15 secondi in un terminale digita

lsusb

(la prima è una elle) e posta il risultato
Avatar utente
Danx
Entusiasta Emergente
Entusiasta Emergente
 
Messaggi: 1853
Iscrizione: ottobre 2008

[Internet] Re: [Internet] Internet Key USB HSPA One Touch X060S

Messaggioda CaioGiulioCesare » lunedì 13 luglio 2009, 17:37

Ciao Danx :)
il comando lsusb mi rende il seguente risultato:

salvo@shadow:~$ lsusb
Bus 002 Device 005: ID 1bbb:0000 T & A Mobile Phones
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 003: ID 15ca:00c3 Textech International Ltd. Mini Optical Mouse
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 04f2:b008 Chicony Electronics Co., Ltd
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
salvo@shadow:~$

credo sia la prima riga ad identificare la internet key.
Ho provato a seguire la guida reperibile in http://www.tuxmind.org/2009/04/16/alcat ... -un-pirla/, ma nisba.

Attendo notizie...
Avatar utente
CaioGiulioCesare
Prode Principiante
 
Messaggi: 37
Iscrizione: febbraio 2008
Desktop: GNOME
Distribuzione: Ubuntu

Re: [Internet] Internet Key USB HSPA One Touch X060S

Messaggioda Danx » martedì 14 luglio 2009, 10:44

fai una modifica in usb_modeswitch.conf, al posto di f000 metti 0000 cioè questa riga da così

DefaultProduct= 0xf000

a così

DefaultProduct= 0x0000


e poi prova
Avatar utente
Danx
Entusiasta Emergente
Entusiasta Emergente
 
Messaggi: 1853
Iscrizione: ottobre 2008

[Internet] Re: [Internet] Internet Key USB HSPA One Touch X060S

Messaggioda CaioGiulioCesare » martedì 14 luglio 2009, 14:35

ti posto il contenuto di /etc/usb_modeswitch.conf perché non so dove devo far i cambiamenti che mi hai suggerito.
In quale punto intervengo?

# /etc/usb_modeswitch.conf
#
# Last modified: 2008-10-27
#
# Configuration for usb_modeswitch, a mode switching tool for controlling
# flip flop (multiple device) USB gear
#
# Main purpose is to trigger the switching of several known UMTS modems
# from storage device mode ("ZeroCD TM" for use with MS Windows) to modem
# (serial) device mode
#
# Detailed instructions and a friendly forum on the homepage:
# http://www.draisberghof.de/usb_modeswitch
#
# News update: you want to read the paragraph about troubleshooting there
# if you run into problems !!!


# Just set or remove the comment signs (# and ;) in order to activate
# your device.
#
# For custom settings:
# Numbers can be decimal or hexadecimal, MessageStrings MUST be
# hexadecimal without prepended "0x". Digits 9-16 in the known
# MessageStrings are arbitrary; I set them to "12345678"


# What it all means (command line flags appended):
#
# * DefaultVendor      -v
# * DefaultProduct    -p
#
# This is the ID the USB device shows after having been plugged in.
# The program needs this; if not found -> no action.
#
# * TargetVendor      -V
# * TargetProduct      -P
#
# This is the ID the USB device after successful mode switching.
# ! From version 0.9.4 just for information purposes !
# Might be useful for testing in future versions
#
# * TargetClass        -C
#
# Some newer devices don't change IDs but switch device class. If
# the device has the target class -> no action (and vice versa)
#
# * MessageEndpoint    -m
#
# A kind of address inside the interface to which the "message"
# (the sequence that does the actual switching) is directed
#
# * MessageContent    -M
#
# A hex string containing the "message" sequence; it will be
# sent as a USB bulk transfer.
#
# * ResponseEndpoint  -r
# * NeedResponse      -n <0/1>  OBSOLETE; just give ResponseEndpoint
#
# Some devices were reported to require receiving the response of the
# bulk transfer to do the switching properly. Usually not needed.
#
# * DetachStorageOnly  -d <0/1>
#
# Some devices just need to be detached from the usb-storage
# driver to initiate the mode switching. Using this feature
# instead of removing the whole usbstorage module keeps other
# storage devices working.
#
# * HuaweiMode        -H <0/1>
#
# Some Huawei devices can be switched by a special control
# message.
#
# * SierraMode        -S <0/1>
#
# Some Sierra devices can be switched by a special control
# message.
#
# * SonyMode          -O <0/1>
#
# Some Sony-Ericsson devices can be switched by a special control
# message. This is experimental and might not have a stable result
#
# * ResetUSB          -R <0/1>
#
# Some devices need a rougher treatment. If the switching seems
# to do something (run udevmonitor), but your system does not reflect
# it, try this somewhat brutal method to do a reset after switching.
# Mind that if your device switched OK before, this will probably set
# it back to storage mode ...
#
# * Interface          -i
# * Configuration      -u
# * AltSetting        -a
#
# More USB parameter to help with tricky devices and for doing lots
# of cruel experiments ...
#
# All other entries are just ignored !

# Additional command line flags:
#
# Verbose output      -W
# No output at all    -q
# Other config file    -c


# For filling in all this information for an unknown device,
# note its Vendor and Product ID after plugging in (usb-storage)
# from /proc/bus/usb/devices (or from the output of "lsusb"), then
# try spying on the USB communication to this device inside a
# Micro$oft OS. Recommended tool: "SniffUSB"
#
# If you find working codes and configurations, please contribute
# them!



#######################################################
# Option GlobeSurfer Icon (aka "Vodafone EasyBox")
#
# The message SHOULD be the same for all Option devices

;DefaultVendor=  0x05c6
;DefaultProduct= 0x1000

;TargetVendor=  0x0af0
;TargetProduct=  0x6600

;MessageEndpoint=0x05
;MessageContent="55534243123456780000000000000601000000000000000000000000000000"


#######################################################
# Option GlobeSurfer Icon 7.2
#
# Contributor: The Pharscape Forum

;DefaultVendor=  0x05c6
;DefaultProduct= 0x1000

;TargetVendor=  0x0af0
;TargetProduct=  0x6901

;MessageEndpoint=0x05
;MessageContent="55534243123456780000000000000601000000000000000000000000000000"


########################################################
# Option GlobeTrotter GT MAX 3.6 (aka "T-Mobile Web'n'walk Card Compact II")
#
# Contributor: Bernd Holzmüller

;DefaultVendor=  0x05c6
;DefaultProduct= 0x1000

;TargetVendor=  0x0af0
;TargetProduct=  0x6600

;MessageEndpoint=0x05
;MessageContent="55534243123456780000000000000601000000000000000000000000000000"

;ResponseEndpoint=0x84


########################################################
# Option GlobeTrotter GT MAX "7.2 Ready"
#
# Contributors: Lucas Benedicic, Morgwai Kotarbinski

;DefaultVendor=  0x05c6
;DefaultProduct= 0x1000

;TargetVendor=  0x0af0
;TargetProduct=  0x6701

;MessageEndpoint=0x05
;MessageContent="55534243123456780000000000000601000000000000000000000000000000"


########################################################
# Option GlobeTrotter EXPRESS 7.2 (aka "T-Mobile wnw Express II")
#
# Contributor: Fridtjof Busse

;DefaultVendor=  0x05c6
;DefaultProduct= 0x1000

;TargetVendor=  0x0af0
;TargetProduct=  0x6701

;MessageEndpoint=0x05
;MessageContent="55534243123456780000000000000601000000000000000000000000000000"

# Response reading needed according to one (1) report
;ResponseEndpoint=0x84


#######################################################
# Option GlobeSurfer Icon 7.2, new firmware (HSO driver)
#
# Vendor/ProductID don't change when switching, only the device
# class does.
# HSO driver support is available at Pharscape (www.pharscape.org)
#
# Contributor: Paul Hardwick

;DefaultVendor=  0x0af0
;DefaultProduct= 0x6911

;TargetClass=    0xff

;MessageEndpoint=0x05
;MessageContent="55534243123456780000000000000601000000000000000000000000000000"


#######################################################
# Option Icon 225 HSDPA
#
# New Firmware. HSO driver support is available at Pharscape (www.pharscape.org)
#
# Contributor: Matti Viljanen

;DefaultVendor=  0x0af0
;DefaultProduct= 0x6971

;TargetClass=    0xff

;MessageEndpoint=0x05
;MessageContent="55534243785634120100000080000601000000000000000000000000000000"


#######################################################
# Option GlobeTrotter HSUPA Modem (aka "T-Mobile Web'n'walk Card Compact III')
#
# New Firmware. HSO driver support is available at Pharscape (www.pharscape.org)
#
# Contributor: Gerold Gruber

;DefaultVendor=  0x0af0
;DefaultProduct= 0x7011

;TargetClass=    0xff

;MessageEndpoint=0x05
;MessageContent="55534243785634120100000080000601000000000000000000000000000000"


########################################################
# AT&T USBConnect Quicksilver (made by Option, HSO driver)
#
# Contributor: sissie from Bullteam

;DefaultVendor=  0x0af0
;DefaultProduct= 0xd033

;TargetClass=    0xff

;MessageEndpoint=0x05
;MessageContent="55534243785634120100000080000601000000000000000000000000000000"


########################################################
# Huawei E220 (aka "Vodafone EasyBox II", aka "T-Mobile wnw Box Micro")
# Huawei E270
# Huawei E870
# and probably most other Huawei devices (just adapt product ID)
#
# Two options: 1. removal of "usb-storage"  2. the special control
# message found by Miroslav Bobovsky
#
# Contributor: Hans Kurent, Denis Sutter

;DefaultVendor=  0x12d1;
;DefaultProduct= 0x1003

# choose one of these:
;DetachStorageOnly=1
;HuaweiMode=1


########################################################
# Huawei E169
#
# Contributor: Dale Lane

;DefaultVendor=  0x12d1;
;DefaultProduct= 0x1001

# choose one of these:
;DetachStorageOnly=1
;HuaweiMode=1


########################################################
# Huawei E630
#
# You might also try to use the new Huawei sequence with it
#
# Beware: there are modem-only variants around - no storage,
# no switching necessary!
#
# Contributor: Joakim Wenrgren

;DefaultVendor=  0x1033
;DefaultProduct= 0x0035

;TargetVendor=  0x12d1
;TargetProduct=  0x1003

;DetachStorageOnly=1


########################################################
# ZTE MF620 (aka "Onda MH600HS")
#
# Probably works with DetachStorageOnly too
#
# Contributor: Flávio Moringa

;DefaultVendor=  0x19d2
;DefaultProduct= 0x2000

;TargetVendor=  0x19d2
;TargetProduct=  0x0001

;MessageEndpoint=0x04
;MessageContent="55534243123456780000000000000600000000000000000000000000000000"


########################################################
# ZTE MF622 (aka "Onda MDC502HS")
#
# Contributor: "andylog"

;DefaultVendor=  0x19d2
;DefaultProduct= 0x2000

;TargetVendor=  0x19d2
;TargetProduct=  0x0002

;MessageEndpoint=0x04
;MessageContent="55534243f8f993882000000080000a85010101180101010101000000000000"


########################################################
# ZTE MF622 (probably different version)
#
# Contributor: Pedro Algarvio

;DefaultVendor=  0x19d2
;DefaultProduct= 0x2000

;TargetVendor=  0x19d2
;TargetProduct=  0x0001

;DetachStorageOnly=1


########################################################
# ZTE MF628
#
# Captured with "usbmon". Has a micro SD slot which can be
# activated alternatively
#
# Contributor: Alvaro Lopes

;DefaultVendor=  0x19d2
;DefaultProduct= 0x2000

# To modem mode:

;TargetVendor=  0x19d2
;TargetProduct=  0x0015

;MessageEndpoint=0x08
;MessageContent="5553424312345678000000000000061b000000030000000000000000000000"

# To SD slot mode:

;TargetVendor=  0x05c6
;TargetProduct=  0x2001

;MessageEndpoint=0x08
;MessageContent="55534243123456782000000080000a86010101180101010101000000000000"

;ResponseEndpoint=7


########################################################
# ZTE MF628+ (tested version from Telia / Sweden)
# ZTE MF626
#
# Contributor: Joakim Wennergren

;DefaultVendor=  0x19d2
;DefaultProduct= 0x2000

;TargetVendor=  0x19d2
;TargetProduct=  0x0031

;MessageEndpoint=0x01
;MessageContent="55534243123456782000000080000c85010101180101010101000000000000"


########################################################
# ZTE MF638 (aka "Onda MDC525UP")
#
# Contributor: "andylog"

;DefaultVendor=  0x19d2
;DefaultProduct= 0x2000

;TargetVendor=  0x19d2
;TargetProduct=  0x0037

;MessageEndpoint=0x01
;MessageContent="55534243123456782000000080000c85010101180101010101000000000000"


########################################################
# ONDA MT503HS (most likely a ZTE model)
#
# Contributor: Lucio Asnaghi a.k.a. kRAkEn/gORe

;DefaultVendor=  0x19d2
;DefaultProduct= 0x2000

;TargetVendor=  0x19d2
;TargetProduct=  0x0002

;MessageEndpoint=0x08
;MessageContent="55534243b0c8dc812000000080000a85010101180101010101000000000000"


########################################################
# ONDA MT505UP (most likely a ZTE model)
#
# Contributor: Alex Scortegagna

;DefaultVendor=  0x19d2
;DefaultProduct= 0x2000

;TargetVendor=  0x19d2
;TargetProduct=  0x0002

;MessageEndpoint=0x03
;MessageContent="55534243123456780000010080000a28000000001c00002000000000000000"


########################################################
# Novatel Wireless Ovation MC950D HSUPA
# Novatel Wireless Merlin XU950D
# Novatel Wireless Ovation 930D
#
# Contributor: Razvan Dragomirescu, Mike Kirk

;DefaultVendor=  0x1410
;DefaultProduct= 0x5010

;TargetVendor=  0x1410
;TargetProduct=  0x4400

;MessageEndpoint=0x09
;MessageContent="5553424312345678000000000000061b000000020000000000000000000000"

# Note: detaching the storage driver might work as well


########################################################
# Novatel U727 USB modem
#
# Modem only versions (no switching required) are around.
#
# Contributor: Chris Thielen

;DefaultVendor=  0x1410
;DefaultProduct= 0x5010

;TargetVendor=  0x1410
;TargetProduct=  0x4100

;MessageEndpoint=0x08
;MessageContent="5553424312345678000000000000061b000000020000000000000000000000"


########################################################
# Novatel MC990D
#
# Contributor: Joakim Wennergren

;DefaultVendor=  0x1410
;DefaultProduct= 0x5020

;Interface=      5

;MessageEndpoint=0x01
;MessageContent="5553424312345678000000000000061b000000020000000000000000000000"


########################################################
# Alcatel OT-X020 (aka MBD-100HU, aka Nuton 3.5G), works with Emobile D11LC
#
# Contributor: Aleksandar Samardzic

;DefaultVendor=  0x1c9e
;DefaultProduct= 0x1001

;TargetVendor=  0x1c9e
;TargetProduct=  0x6061

;MessageEndpoint=0x05
;MessageContent="55534243123456780000000000000606f50402527000000000000000000000"


########################################################
# AnyDATA ADU-500A, ADU-510A, ADU-520A
#
# Contributor: Vladimir Poluektov

;DefaultVendor=  0x05c6
;DefaultProduct= 0x1000

;TargetVendor=  0x16d5
;TargetProduct=  0x6502

;MessageEndpoint=0x08
;MessageContent="5553424312345678000000000000061b000000020000000000000000000000"


########################################################
# BandLuxe C120
#
# Reportedly needs several switch calls in a certain order. See
# http://www.draisberghof.de/usb_modeswit ... c.php?t=71
# This might be a case to try the new ResetUSB function
#
# Contributor: Alexander Czigler

;DefaultVendor=  0x1a8d
;DefaultProduct= 0x1000

;TargetVendor=  0x1a8d
;TargetProduct=  0x1002

;MessageEndpoint=0x05
;MessageContent="55534243123456781200000080000603000000020000000000000000000000"

;ResponseEndpoint=0x82


########################################################
# Solomon S3Gm-660
#
# Same notes apply as with the BandLuxe C120 above
#
# Contributor: Alexander Czigler

;DefaultVendor=  0x1dd6
;DefaultProduct= 0x1000

;TargetVendor=  0x1dd6
;TargetProduct=  0x1002

;MessageEndpoint=0x05
;MessageContent="55534243123456781200000080000603000000020000000000000000000000"

;ResponseEndpoint=0x82


########################################################
# C-motech D-50 (aka "CDU-680")
#
# Interesting notes about the device in the forum post at
# http://www.draisberghof.de/usb_modeswit ... c.php?t=69
#
# Contributor: Alexander Czigler

;DefaultVendor=  0x16d8
;DefaultProduct= 0x6803

;TargetVendor=  0x16d8
;TargetProduct=  0x6803

;MessageEndpoint=0x07
;MessageContent="555342431234567824000000800008ff524445564348470000000000000000"


########################################################
# C-motech CGU-628 (aka "Franklin Wireless CGU-628A" aka "4G Systems XS Stick W12")
#
# Contributor: Mathias Picker

;DefaultVendor=  0x16d8
;DefaultProduct= 0xf000

;TargetVendor=  0x16d8
;TargetProduct=  0x6006

;MessageEndpoint=0x09
;MessageContent="55534243d85dd88524000000800008ff524445564348470000000000000000"


########################################################
# Toshiba G450
#
# Contributor: Mijail Anton

;DefaultVendor=  0x0930
;DefaultProduct= 0x0d46

;TargetVendor=  0x0930
;TargetProduct=  0x0d45

;MessageEndpoint=0x05
;MessageContent="5553424312345678000000000000061b000000020000000000000000000000"


########################################################
# UTStarcom UM175 (distributor "Alltel")
#
# Contributor: Mark A. Ziesemer

;DefaultVendor=  0x106c
;DefaultProduct= 0x3b03

;TargetVendor=  0x106c
;TargetProduct=  0x3715

;MessageEndpoint=0x05
;MessageContent="555342431234567824000000800008ff024445564348470000000000000000"


########################################################
# Hummer DTM5731
#
# Contributor: "paul"

;DefaultVendor=  0x1ab7
;DefaultProduct= 0x5700

;TargetVendor=  0x1ab7
;TargetProduct=  0x5731

;MessageEndpoint=0x07
;MessageContent="5553424312345678000000000000061b000000020000000000000000000000"


########################################################
# A-Link 3GU
#
# Contributor: A-Link Europe Ltd.

;DefaultVendor=  0x1e0e
;DefaultProduct= 0xf000

;TargetVendor=  0x1e0e
;TargetProduct=  0x9200

;MessageEndpoint=0x01
;MessageContent="5553424312345678000000000000061b000000020000000000000000000000"


########################################################
# Sierra Wireless AirCard 881U (most likely 880U too)
#
# Contributor: Vincent Teoh

;DefaultVendor=  0x1199
;DefaultProduct= 0x0fff

;TargetVendor=  0x1199
;TargetProduct=  0x6856

;SierraMode=1


########################################################
# Sony Ericsson MD400
#
# This is experimental. Might reset after some time. Please report!

;DefaultVendor=  0x0fce
;DefaultProduct= 0xd0e1

;TargetClass=    0x02

;SonyMode=1

# This might work too instead; subject to testing
;Configuration=2


########################################################
# LG LDU-1900D EV-DO (Rev. A)
#
# Recommended init command: ATE0V1&D2&C1S0=0
#
# Contributor: Jérôme Oufella

;DefaultVendor=  0x1004
;DefaultProduct= 0x1000

;MessageEndpoint=0x08
;MessageContent="55534243123456780000000000000aff554d53434847000000000000000000"


########################################################
# Samsung SGH-Z810 USB (with microSD card)
#
# After switching the usb-storage binds to the microSD card
#
# Contributor: A Friend

;DefaultVendor=  0x05c6
;DefaultProduct= 0x1000

;TargetVendor=  0x04e8
;TargetProduct=  0x6601

;MessageEndpoint=0x05
;MessageContent="55534243123456780000000000000616000000000000000000000000000000"

Grazie
Avatar utente
CaioGiulioCesare
Prode Principiante
 
Messaggi: 37
Iscrizione: febbraio 2008
Desktop: GNOME
Distribuzione: Ubuntu

Re: [Internet] Internet Key USB HSPA One Touch X060S

Messaggioda Danx » martedì 14 luglio 2009, 15:58

vedendo il file direi che non hai seguito bene la guida infatti non c'è la modifica indicata, ad ogni modo fai così, fai un backup del file modeswitch poi lo apri cancelli tutto il contenuto e ci incolli queste righe

DefaultVendor= 0x1bbb
DefaultProduct= 0xf000
TargetVendor= 0x1bbb
TargetProduct= 0xf000
MessageEndpoint=0x01
MessageContent="55534243123456788000000080000606f50402527000000000000000000000"

poi salva, togli la chiavetta e reinseriscila, dopo digita lsusb, nella riga di T & A usa i numeri esadecimali indicati dopo ID e li metti in questa stringa al posto degli 1111 nell'ordine in cui li trovi

sudo modprobe usbserial vendor=0x1111 product=0x1111

occhio agli spazi, a questo punto digita di nuovo lsusb, i numeri della ID dovrebbero essere diversi e cioè corrispondere a questi 1bbb:f000, riutilizzali nello stesso modo con la stringa qui sopra, dopo digita

sudo usb_modeswitch

se non ci sono stati errori dovresti poterti connettere, altrimenti postami gli errori nei vari passaggi
Avatar utente
Danx
Entusiasta Emergente
Entusiasta Emergente
 
Messaggi: 1853
Iscrizione: ottobre 2008

[Internet] Re: [Internet] Internet Key USB HSPA One Touch X060S

Messaggioda CaioGiulioCesare » martedì 14 luglio 2009, 19:21

Ciao Danx, ho fatto come suggerito. Backup del file usb_modeswitch.conf, eliminazione del suo contenuto e sostituzione delle righe indicate. Ho salvato, sganciato e riagganciato internet key.

Il primo lsusb ha reso il seguente output:

Bus 002 Device 006: ID 1bbb:f000 T & A Mobile Phones
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 04f2:b008 Chicony Electronics Co., Ltd
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

ho dato comando:
salvo@shadow:/etc$ sudo modprobe usbserial vendor=0x1bbb product=0xf000

ed al successivo lsusb ho ottenuto:

Bus 002 Device 006: ID 1bbb:f000 T & A Mobile Phones
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 04f2:b008 Chicony Electronics Co., Ltd
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

poi il comando:
salvo@shadow:/etc$ sudo usb_modeswitch

ha reso:

* usb_modeswitch: tool for controlling "flip flop" mode USB devices
* Version 0.9.6 (C) Josua Dietze 2009
* Works with libusb 0.1.12 and probably other versions

Looking for target devices
Found target devices (1)
Looking for default devices
Found default devices (1)
Prepare switching, accessing latest device
Looking for active default driver to detach it
No driver found. Device probably not initialized. Trying to continue ...
Setting up communication with device
Error: MessageContent hex string has uneven length. Aborting

salvo@shadow:/etc$  >:( >:( >:( :(
Avatar utente
CaioGiulioCesare
Prode Principiante
 
Messaggi: 37
Iscrizione: febbraio 2008
Desktop: GNOME
Distribuzione: Ubuntu

Re: [Internet] Internet Key USB HSPA One Touch X060S

Messaggioda Danx » martedì 14 luglio 2009, 22:29

cambiamo l'ordine dei comandi,inoltre mi sembra di aver fatto un errore nel copia incolla quindi rifai usb_modeswitch con queste righe e cancella le altre


########################################################
# Alcatel X060

DefaultVendor=  0x1bbb
DefaultProduct= 0xf000

TargetVendor=   0x1bbb
TargetProduct=  0x0000

# only for reference
# MessageEndpoint=0x01

MessageContent="55534243123456788000000080000606f50402527000000000000000000000"
########################################################

poi dai i comand seguenti

sudo usb_modeswitch
sudo modprobe usbserial vendor=0x1bbb product=0x0000

poi dai dmesg e dovrebbe esserci il modem elencato
Avatar utente
Danx
Entusiasta Emergente
Entusiasta Emergente
 
Messaggi: 1853
Iscrizione: ottobre 2008

Re: [Internet] Internet Key USB HSPA One Touch X060S

Messaggioda swn » mercoledì 15 luglio 2009, 11:40

forse il problema è lo spazio nella stringa dove ci sono gli zeri...

magari facendo il copia incolla , viene creato uno spazio sul forum...

MessageContent="55534243123456788000000080000606f50402527000000000000000000 000"

Prova ad inserirla senza lo spazio .
Ultima modifica di swn il mercoledì 15 luglio 2009, 11:41, modificato 1 volta in totale.
swn
Prode Principiante
 
Messaggi: 48
Iscrizione: luglio 2007

Re: [Internet] Internet Key USB HSPA One Touch X060S

Messaggioda Danx » mercoledì 15 luglio 2009, 19:07

infatti mi riferivo proprio a questo dicendo di un errore, non sò perchè ma c'era appunto quello spazio
Avatar utente
Danx
Entusiasta Emergente
Entusiasta Emergente
 
Messaggi: 1853
Iscrizione: ottobre 2008

[Internet] Re: [Internet] Internet Key USB HSPA One Touch X060S

Messaggioda CaioGiulioCesare » mercoledì 15 luglio 2009, 19:27

Ciao Danx,
ho provato ad riscrivere usb_modeswitch.conf con le linee inidcate facendo attenzione ad eliminare lo spazio nella stringa numerica.
Ho dato i comandi:
sudo usb_modeswitch

ed ho ottenuto:
salvo@shadow:~$ sudo usb_modeswitch

* usb_modeswitch: tool for controlling "flip flop" mode USB devices
* Version 0.9.6 (C) Josua Dietze 2009
* Works with libusb 0.1.12 and probably other versions

Looking for default devices
Found default devices (1)
Prepare switching, accessing latest device
Looking for active default driver to detach it
No driver found. Device probably not initialized. Trying to continue ...
Setting up communication with device
Error: no MessageEndpoint given. Can't send message. Aborting

poi il comando:
sudo modprobe usbserial vendor=0x1bbb product=0x0000

e dmesg, ma non riesco a veder il modem elencato. Posto il risultato:

[    1.769240] pcieport-driver 0000:00:1c.4: irq 2298 for MSI/MSI-X
[    1.769258] pci_express 0000:00:1c.4:pcie00: allocate port service
[    1.769270] pci_express 0000:00:1c.4:pcie02: allocate port service
[    1.769281] pci_express 0000:00:1c.4:pcie03: allocate port service
[    1.769366] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.769886] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.770027] ACPI: AC Adapter [ACAD] (off-line)
[    1.900148] ACPI: Battery Slot [BAT1] (battery present)
[    1.900214] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    1.900217] ACPI: Power Button (FF) [PWRF]
[    1.900259] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[    1.900306] ACPI: Lid Switch [LID0]
[    1.900347] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[    1.900350] ACPI: Power Button (CM) [PWRB]
[    1.900923] ACPI: SSDT BFED882B, 027A (r1  PmRef  Cpu0Ist    3000 INTL 20050624)
[    1.901352] ACPI: SSDT BFED831B, 048B (r1  PmRef  Cpu0Cst    3001 INTL 20050624)
[    1.903719] Monitor-Mwait will be used to enter C-1 state
[    1.903723] Monitor-Mwait will be used to enter C-2 state
[    1.903725] Monitor-Mwait will be used to enter C-3 state
[    1.903739] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[    1.903763] processor ACPI_CPU:00: registered as cooling_device0
[    1.903766] ACPI: Processor [CPU0] (supports 8 throttling states)
[    1.904113] ACPI: SSDT BFED8AA5, 00C8 (r1  PmRef  Cpu1Ist    3000 INTL 20050624)
[    1.904500] ACPI: SSDT BFED87A6, 0085 (r1  PmRef  Cpu1Cst    3000 INTL 20050624)
[    1.905466] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[    1.905485] processor ACPI_CPU:01: registered as cooling_device1
[    1.905489] ACPI: Processor [CPU1] (supports 8 throttling states)
[    1.929237] isapnp: Scanning for PnP cards...
[    2.272427] isapnp: No Plug & Play device found
[    2.281231] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[    2.282203] brd: module loaded
[    2.282494] loop: module loaded
[    2.282555] Fixed MDIO Bus: probed
[    2.282560] PPP generic driver version 2.4.2
[    2.282613] input: Macintosh mouse button emulation as /devices/virtual/input/input3
[    2.282641] Driver 'sd' needs updating - please use bus_type methods
[    2.282652] Driver 'sr' needs updating - please use bus_type methods
[    2.282690] ahci 0000:00:1f.2: version 3.0
[    2.282702] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    2.282742] ahci 0000:00:1f.2: irq 2297 for MSI/MSI-X
[    2.282806] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
[    2.282809] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part
[    2.282815] ahci 0000:00:1f.2: setting latency timer to 64
[    2.283033] scsi0 : ahci
[    2.283118] scsi1 : ahci
[    2.283173] scsi2 : ahci
[    2.283266] ata1: SATA max UDMA/133 abar m2048@0xfe404000 port 0xfe404100 irq 2297
[    2.283270] ata2: SATA max UDMA/133 abar m2048@0xfe404000 port 0xfe404180 irq 2297
[    2.283273] ata3: SATA max UDMA/133 abar m2048@0xfe404000 port 0xfe404200 irq 2297
[    2.600021] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.600954] ACPI Warning (nspredef-0852): \_SB_.PCI0.SATA.PRT0._GTF: Return type mismatch - found Integer, expected Buffer [20080926]
[    2.600961] ata1.00: _GTF unexpected object type 0x1
[    2.601110] ata1.00: ATA-8: Hitachi HTS542516K9SA00, BBCOC33P, max UDMA/133
[    2.601113] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    2.602241] ata1.00: _GTF unexpected object type 0x1
[    2.602409] ata1.00: configured for UDMA/133
[    2.936017] ata2: SATA link down (SStatus 0 SControl 300)
[    3.272019] ata3: SATA link down (SStatus 0 SControl 300)
[    3.288098] scsi 0:0:0:0: Direct-Access    ATA      Hitachi HTS54251 BBCO PQ: 0 ANSI: 5
[    3.288186] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
[    3.288201] sd 0:0:0:0: [sda] Write Protect is off
[    3.288203] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.288227] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.288283] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
[    3.288297] sd 0:0:0:0: [sda] Write Protect is off
[    3.288299] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.288322] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.288326]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[    3.624765] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.624803] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    3.624854] ata_piix 0000:00:1f.1: version 2.12
[    3.624861] ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    3.624895] ata_piix 0000:00:1f.1: setting latency timer to 64
[    3.624966] scsi3 : ata_piix
[    3.625022] scsi4 : ata_piix
[    3.625652] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x18a0 irq 14
[    3.625655] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18a8 irq 15
[    3.788418] ata4.00: ATAPI: HL-DT-ST DVDRAM GSA-T20N, WT03, max UDMA/33
[    3.804378] ata4.00: configured for UDMA/33
[    3.974357] scsi 3:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-T20N  WT03 PQ: 0 ANSI: 5
[    3.985266] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    3.985269] Uniform CD-ROM driver Revision: 3.20
[    3.985349] sr 3:0:0:0: Attached scsi CD-ROM sr0
[    3.985383] sr 3:0:0:0: Attached scsi generic sg1 type 5
[    3.986056] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    3.986074] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    3.986088] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[    3.986092] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    3.986146] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    3.990053] ehci_hcd 0000:00:1a.7: debug port 1
[    3.990061] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[    3.990075] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfe404800
[    4.004008] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    4.004068] usb usb1: configuration #1 chosen from 1 choice
[    4.004095] hub 1-0:1.0: USB hub found
[    4.004102] hub 1-0:1.0: 4 ports detected
[    4.004204] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    4.004215] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    4.004219] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    4.004259] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    4.008177] ehci_hcd 0000:00:1d.7: debug port 1
[    4.008184] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    4.008197] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe404c00
[    4.020010] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    4.020062] usb usb2: configuration #1 chosen from 1 choice
[    4.020088] hub 2-0:1.0: USB hub found
[    4.020094] hub 2-0:1.0: 6 ports detected
[    4.020184] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    4.020201] uhci_hcd: USB Universal Host Controller Interface driver
[    4.020219] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    4.020226] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[    4.020229] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    4.020274] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    4.020308] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800
[    4.020376] usb usb3: configuration #1 chosen from 1 choice
[    4.020400] hub 3-0:1.0: USB hub found
[    4.020407] hub 3-0:1.0: 2 ports detected
[    4.020498] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    4.020504] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[    4.020508] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    4.020546] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    4.020582] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820
[    4.020650] usb usb4: configuration #1 chosen from 1 choice
[    4.020673] hub 4-0:1.0: USB hub found
[    4.020679] hub 4-0:1.0: 2 ports detected
[    4.020759] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    4.020765] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    4.020769] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    4.020805] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[    4.020833] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001840
[    4.020900] usb usb5: configuration #1 chosen from 1 choice
[    4.020923] hub 5-0:1.0: USB hub found
[    4.020930] hub 5-0:1.0: 2 ports detected
[    4.021013] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    4.021019] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    4.021023] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    4.021063] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[    4.021097] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001860
[    4.021164] usb usb6: configuration #1 chosen from 1 choice
[    4.021187] hub 6-0:1.0: USB hub found
[    4.021193] hub 6-0:1.0: 2 ports detected
[    4.021273] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    4.021279] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    4.021283] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    4.021320] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[    4.021347] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001880
[    4.021415] usb usb7: configuration #1 chosen from 1 choice
[    4.021442] hub 7-0:1.0: USB hub found
[    4.021449] hub 7-0:1.0: 2 ports detected
[    4.021582] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    4.056389] serio: i8042 KBD port at 0x60,0x64 irq 1
[    4.056394] serio: i8042 AUX port at 0x60,0x64 irq 12
[    4.061034] mice: PS/2 mouse device common for all mice
[    4.077065] rtc_cmos 00:07: RTC can wake from S4
[    4.077094] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[    4.077126] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    4.077178] device-mapper: uevent: version 1.0.3
[    4.077254] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[    4.077322] device-mapper: multipath: version 1.0.5 loaded
[    4.077324] device-mapper: multipath round-robin: version 1.0.0 loaded
[    4.077392] EISA: Probing bus 0 at eisa.0
[    4.077398] Cannot allocate resource for EISA slot 1
[    4.077400] Cannot allocate resource for EISA slot 2
[    4.077402] Cannot allocate resource for EISA slot 3
[    4.077404] Cannot allocate resource for EISA slot 4
[    4.077406] Cannot allocate resource for EISA slot 5
[    4.077408] Cannot allocate resource for EISA slot 6
[    4.077410] Cannot allocate resource for EISA slot 7
[    4.077416] EISA: Detected 0 cards.
[    4.077526] cpuidle: using governor ladder
[    4.077638] cpuidle: using governor menu
[    4.078126] TCP cubic registered
[    4.078217] NET: Registered protocol family 10
[    4.078631] lo: Disabled Privacy Extensions
[    4.078957] NET: Registered protocol family 17
[    4.078972] Bluetooth: L2CAP ver 2.11
[    4.078974] Bluetooth: L2CAP socket layer initialized
[    4.078976] Bluetooth: SCO (Voice Link) ver 0.6
[    4.078978] Bluetooth: SCO socket layer initialized
[    4.079006] Bluetooth: RFCOMM socket layer initialized
[    4.079011] Bluetooth: RFCOMM TTY layer initialized
[    4.079013] Bluetooth: RFCOMM ver 1.10
[    4.079267] Marking TSC unstable due to TSC halts in idle
[    4.079688] Using IPI No-Shortcut mode
[    4.079749] registered taskstats version 1
[    4.079884]  Magic number: 1:385:799
[    4.079915] ec PNP0C09:00: hash matches
[    4.079957] rtc_cmos 00:07: setting system clock to 2009-07-15 19:47:27 UTC (1247687247)
[    4.079960] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    4.079962] EDD information not available.
[    4.080230] Freeing unused kernel memory: 532k freed
[    4.080349] Write protecting the kernel text: 4112k
[    4.080393] Write protecting the kernel read-only data: 1524k
[    4.103904] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    4.321028] usb 1-3: new high speed USB device using ehci_hcd and address 2
[    4.353594] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    4.353617] r8169 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    4.353639] r8169 0000:04:00.0: setting latency timer to 64
[    4.353809] r8169 0000:04:00.0: irq 2296 for MSI/MSI-X
[    4.354449] eth0: RTL8101e at 0xf7c80000, 00:1b:38:ac:6a:5e, XID 34200000 IRQ 2296
[    4.415191] ohci1394 0000:0c:04.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    4.463451] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17]  MMIO=[fe102000-fe1027ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
[    4.495683] usb 1-3: configuration #1 chosen from 1 choice
[    4.948472] PM: Starting manual resume from disk
[    4.948475] PM: Resume from partition 8:5
[    4.948476] PM: Checking hibernation image.
[    4.948676] PM: Resume from disk failed.
[    4.974412] kjournald starting.  Commit interval 5 seconds
[    4.974450] EXT3-fs: mounted filesystem with ordered data mode.
[    5.448048] usb 2-5: new high speed USB device using ehci_hcd and address 2
[    5.591491] usb 2-5: configuration #1 chosen from 1 choice
[    5.768211] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00023f7bad409994]
[  12.239877] udev: starting version 141
[  12.475413] iTCO_vendor_support: vendor-support=0
[  12.499243] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
[  12.499484] iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware
[  12.499500] iTCO_wdt: No card detected
[  12.596886] Linux agpgart interface v0.103
[  12.661742] input: PC Speaker as /devices/platform/pcspkr/input/input5
[  13.821829] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[  13.847775] [fglrx] Maximum main memory to use for locked dma buffers: 2877 MBytes.
[  13.848067] [fglrx]  vendor: 1002 device: 94c9 count: 1
[  13.848541] [fglrx] ioport: bar 1, base 0x2000, size: 0x100
[  13.848559] pci 0000:01:00.0: power state changed by ACPI to D0
[  13.848569] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[  13.848575] pci 0000:01:00.0: setting latency timer to 64
[  13.849717] [fglrx] Driver built-in PAT support is enabled successfully
[  13.849747] [fglrx] module loaded - fglrx 8.60.40 [Mar 14 2009] with 1 minors
[  13.967823] acpi device:05: registered as cooling_device2
[  13.969857] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/device:03/input/input6
[  13.980204] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[  14.332443] sdhci: Secure Digital Host Controller Interface driver
[  14.332446] sdhci: Copyright(c) Pierre Ossman
[  14.333996] sdhci-pci 0000:0c:04.3: SDHCI controller found [104c:803c] (rev 0)
[  14.334015] sdhci-pci 0000:0c:04.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[  14.334301] mmc0: SDHCI controller on PCI [0000:0c:04.3] using DMA
[  14.373336] Initializing USB Mass Storage driver...
[  14.375280] usb-storage: probe of 2-5:1.0 failed with error -5
[  14.375394] usb-storage: probe of 2-5:1.1 failed with error -5
[  14.375502] usb-storage: probe of 2-5:1.2 failed with error -5
[  14.376211] usb-storage: probe of 2-5:1.3 failed with error -1
[  14.376907] usb-storage: probe of 2-5:1.4 failed with error -1
[  14.376945] usbcore: registered new interface driver usb-storage
[  14.376950] USB Mass Storage support registered.
[  14.484127] cfg80211: Calling CRDA to update world regulatory domain
[  14.489842] tifm_7xx1 0000:0c:04.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[  14.555836] usbcore: registered new interface driver usbserial
[  14.555853] USB Serial support registered for generic
[  14.555910] usbcore: registered new interface driver usbserial_generic
[  14.555912] usbserial: USB Serial Driver core
[  14.576266] cfg80211: World regulatory domain updated:
[  14.576269] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  14.576272] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  14.576274] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  14.576276] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  14.576279] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  14.576281] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  14.576820] USB Serial support registered for GSM modem (1-port)
[  14.576876] option 2-5:1.0: GSM modem (1-port) converter detected
[  14.577024] usb 2-5: GSM modem (1-port) converter now attached to ttyUSB0
[  14.577034] option 2-5:1.1: GSM modem (1-port) converter detected
[  14.577121] usb 2-5: GSM modem (1-port) converter now attached to ttyUSB1
[  14.577131] option 2-5:1.2: GSM modem (1-port) converter detected
[  14.577219] usb 2-5: GSM modem (1-port) converter now attached to ttyUSB2
[  14.577240] usbcore: registered new interface driver option
[  14.577242] option: v0.7.2:USB Driver for GSM modems
[  14.596549] Linux video capture interface: v2.00
[  14.643397] yenta_cardbus 0000:0c:04.0: CardBus bridge found [1179:ff00]
[  14.643420] yenta_cardbus 0000:0c:04.0: Enabling burst memory read transactions
[  14.643426] yenta_cardbus 0000:0c:04.0: Using CSCINT to route CSC interrupts to PCI
[  14.643429] yenta_cardbus 0000:0c:04.0: Routing CardBus interrupts to PCI
[  14.643435] yenta_cardbus 0000:0c:04.0: TI: mfunc 0x10a01b22, devctl 0x64
[  14.697936] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume
[  14.710141] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[  14.710195] HDA Intel 0000:00:1b.0: setting latency timer to 64
[  14.743027] hda_codec: Unknown model for ALC268, trying auto-probe from BIOS...
[  14.798423] uvcvideo: Found UVC 1.00 device Chicony USB 2.0 Camera (04f2:b008)
[  14.799557] input: Chicony USB 2.0 Camera as /devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3:1.0/input/input7
[  14.801097] usbcore: registered new interface driver uvcvideo
[  14.801121] USB Video Class driver (v0.1.0)
[  14.813983] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[  14.814057] HDA Intel 0000:01:00.1: setting latency timer to 64
[  14.879180] yenta_cardbus 0000:0c:04.0: ISA IRQ mask 0x0cf8, PCI irq 16
[  14.879184] yenta_cardbus 0000:0c:04.0: Socket status: 30000006
[  14.879188] pci_bus 0000:0c: Raising subordinate bus# of parent bus (#0c) from #0d to #10
[  14.879195] yenta_cardbus 0000:0c:04.0: pcmcia: parent PCI bridge I/O window: 0x7000 - 0x7fff
[  14.879198] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x7000-0x7fff: clean.
[  14.879427] yenta_cardbus 0000:0c:04.0: pcmcia: parent PCI bridge Memory window: 0xfe100000 - 0xfe1fffff
[  14.879430] yenta_cardbus 0000:0c:04.0: pcmcia: parent PCI bridge Memory window: 0xc4000000 - 0xc7ffffff
[  14.928137] ath9k: 0.1
[  14.928185] ath9k 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[  14.928198] ath9k 0000:05:00.0: setting latency timer to 64
[  15.052365] phy0: Selected rate control algorithm 'ath9k_rate_control'
[  15.107515] Registered led device: ath9k-phy0:radio
[  15.107551] Registered led device: ath9k-phy0:assoc
[  15.107587] Registered led device: ath9k-phy0:tx
[  15.107621] Registered led device: ath9k-phy0:rx
[  15.108034] phy0: Atheros 5416: mem=0xf7fa0000, irq=18
[  15.296148] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
[  15.298260] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[  15.299132] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[  15.299856] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[  15.300765] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[  15.474501] lp: driver loaded but no devices found
[  15.500043] Clocksource tsc unstable (delta = -120868138 ns)
[  15.648108] Adding 910184k swap on /dev/sda5.  Priority:-1 extents:1 across:910184k
[  15.664746] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
[  15.665053] EXT3 FS on sda6, internal journal
[  15.874968] Synaptics Touchpad, model: 1, fw: 6.5, id: 0x82e0b1, caps: 0xb04711/0xe0440d
[  15.874978] synaptics: Toshiba Satellite A200 detected, limiting rate to 40pps.
[  15.971042] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
[  16.175334] type=1505 audit(1247680059.592:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=2706
[  16.216323] type=1505 audit(1247680059.636:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=2710
[  16.216413] type=1505 audit(1247680059.636:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=2710
[  16.216449] type=1505 audit(1247680059.636:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=2710
[  16.216482] type=1505 audit(1247680059.636:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=2710
[  16.339413] type=1505 audit(1247680059.756:7): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=2715
[  16.339572] type=1505 audit(1247680059.756:8): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=2715
[  16.364374] type=1505 audit(1247680059.784:9): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=2719
[  16.591465] ip_tables: (C) 2000-2006 Netfilter Core Team
[  16.625764] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[  16.625920] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
[  16.625922] nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
[  16.625924] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[  16.695693] ip6_tables: (C) 2000-2006 Netfilter Core Team
[  20.195807] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[  20.195810] Bluetooth: BNEP filters: protocol multicast
[  20.237907] Bridge firewalling registered
[  21.989691] ppdev: user-space parallel port driver
[  23.417812] fglrx_pci 0000:01:00.0: irq 2295 for MSI/MSI-X
[  23.431663] [fglrx] Firegl kernel thread PID: 4042
[  23.745604] [fglrx] Gart USWC size:1447 M.
[  23.745607] [fglrx] Gart cacheable size:60 M.
[  23.745613] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[  23.745616] [fglrx] Reserved FB block: Unshared offset:7cfc000, size:2ff000
[  23.745619] [fglrx] Reserved FB block: Unshared offset:7ffb000, size:5000
[  25.583024] r8169: eth0: link down
[  25.583219] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  25.600905] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  80.935831] PPP BSD Compression module registered
[  80.957347] PPP Deflate Compression module registered
[  268.806091] UDF-fs: No VRS found
[  268.821660] ISO 9660 Extensions: Microsoft Joliet Level 3
[  268.982830] ISO 9660 Extensions: RRIP_1991A
[  496.079672] usb 2-5: USB disconnect, address 2
[  496.083998] option 2-5:1.0: device disconnected
[  496.084442] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
[  496.084495] option 2-5:1.1: device disconnected
[  496.084901] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2
[  496.084929] option 2-5:1.2: device disconnected
[  557.384199] usb 2-5: new high speed USB device using ehci_hcd and address 3
[  557.524634] usb 2-5: configuration #1 chosen from 1 choice
[  557.527163] scsi10 : SCSI emulation for USB Mass Storage devices
[  557.527663] usb-storage: device found at 3
[  557.527668] usb-storage: waiting for device to settle before scanning
[  657.256174] usb 5-2: new full speed USB device using uhci_hcd and address 2
[  657.453995] usb 5-2: configuration #1 chosen from 1 choice
[  657.455614] scsi11 : SCSI emulation for USB Mass Storage devices
[  657.456831] usb-storage: device found at 2
[  657.456836] usb-storage: waiting for device to settle before scanning
[  662.458550] usb-storage: device scan complete
[  662.461858] scsi 11:0:0:0: Direct-Access              Acer Easy MP3    1.03 PQ: 0 ANSI: 0 CCS
[  662.473360] sd 11:0:0:0: [sdb] 507904 512-byte hardware sectors: (260 MB/248 MiB)
[  662.476301] sd 11:0:0:0: [sdb] Write Protect is off
[  662.476308] sd 11:0:0:0: [sdb] Mode Sense: 43 00 00 00
[  662.476314] sd 11:0:0:0: [sdb] Assuming drive cache: write through
[  662.488279] sd 11:0:0:0: [sdb] 507904 512-byte hardware sectors: (260 MB/248 MiB)
[  662.491219] sd 11:0:0:0: [sdb] Write Protect is off
[  662.491226] sd 11:0:0:0: [sdb] Mode Sense: 43 00 00 00
[  662.491231] sd 11:0:0:0: [sdb] Assuming drive cache: write through
[  662.491242]  sdb: sdb1
[  662.502949] sd 11:0:0:0: [sdb] Attached SCSI removable disk
[  662.503102] sd 11:0:0:0: Attached scsi generic sg2 type 0
[ 1019.200231] usb 5-2: USB disconnect, address 2
[ 1098.864180] usb 5-2: new full speed USB device using uhci_hcd and address 3
[ 1099.062033] usb 5-2: configuration #1 chosen from 1 choice
[ 1099.063633] scsi12 : SCSI emulation for USB Mass Storage devices
[ 1099.074197] usb-storage: device found at 3
[ 1099.074203] usb-storage: waiting for device to settle before scanning
[ 1104.073427] usb-storage: device scan complete
[ 1104.076722] scsi 12:0:0:0: Direct-Access              Acer Easy MP3    1.03 PQ: 0 ANSI: 0 CCS
[ 1104.087403] sd 12:0:0:0: [sdb] 507904 512-byte hardware sectors: (260 MB/248 MiB)
[ 1104.090376] sd 12:0:0:0: [sdb] Write Protect is off
[ 1104.090384] sd 12:0:0:0: [sdb] Mode Sense: 43 00 00 00
[ 1104.090390] sd 12:0:0:0: [sdb] Assuming drive cache: write through
[ 1104.103405] sd 12:0:0:0: [sdb] 507904 512-byte hardware sectors: (260 MB/248 MiB)
[ 1104.106278] sd 12:0:0:0: [sdb] Write Protect is off
[ 1104.106287] sd 12:0:0:0: [sdb] Mode Sense: 43 00 00 00
[ 1104.106292] sd 12:0:0:0: [sdb] Assuming drive cache: write through
[ 1104.106304]  sdb: sdb1
[ 1104.112602] sd 12:0:0:0: [sdb] Attached SCSI removable disk
[ 1104.112739] sd 12:0:0:0: Attached scsi generic sg2 type 0
[ 1157.584240] usb 5-2: USB disconnect, address 3
[ 1157.585492] scsi 12:0:0:0: rejecting I/O to dead device
[ 1157.585514] scsi 12:0:0:0: rejecting I/O to dead device
[ 1157.585529] scsi 12:0:0:0: rejecting I/O to dead device
[ 1157.585541] scsi 12:0:0:0: rejecting I/O to dead device
[ 1157.585549] scsi 12:0:0:0: [sdb] READ CAPACITY failed
[ 1157.585554] scsi 12:0:0:0: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK,SUGGEST_OK
[ 1157.585563] scsi 12:0:0:0: [sdb] Sense not available.
[ 1157.585574] scsi 12:0:0:0: rejecting I/O to dead device
[ 1157.585583] scsi 12:0:0:0: [sdb] Write Protect is off
[ 1157.585589] scsi 12:0:0:0: [sdb] Mode Sense: 00 00 00 00
[ 1157.585595] scsi 12:0:0:0: [sdb] Assuming drive cache: write through
[ 1157.585608] scsi 12:0:0:0: rejecting I/O to dead device
[ 1157.585619] scsi 12:0:0:0: rejecting I/O to dead device
[ 1157.585631] scsi 12:0:0:0: rejecting I/O to dead device
[ 1157.585643] scsi 12:0:0:0: rejecting I/O to dead device
[ 1157.585651] scsi 12:0:0:0: [sdb] READ CAPACITY failed
[ 1157.585655] scsi 12:0:0:0: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK,SUGGEST_OK
[ 1157.585664] scsi 12:0:0:0: [sdb] Sense not available.
[ 1157.585673] scsi 12:0:0:0: rejecting I/O to dead device
[ 1157.585682] scsi 12:0:0:0: [sdb] Write Protect is off
[ 1157.585686] scsi 12:0:0:0: [sdb] Mode Sense: 00 00 00 00
[ 1157.585692] scsi 12:0:0:0: [sdb] Assuming drive cache: write through
[ 1613.272182] usb 5-2: new full speed USB device using uhci_hcd and address 4
[ 1613.470032] usb 5-2: configuration #1 chosen from 1 choice
[ 1613.485925] scsi13 : SCSI emulation for USB Mass Storage devices
[ 1613.486723] usb-storage: device found at 4
[ 1613.486728] usb-storage: waiting for device to settle before scanning
[ 1618.485398] usb-storage: device scan complete
[ 1618.488321] scsi 13:0:0:0: Direct-Access              Acer Easy MP3    1.03 PQ: 0 ANSI: 0 CCS
[ 1618.499382] sd 13:0:0:0: [sdb] 507904 512-byte hardware sectors: (260 MB/248 MiB)
[ 1618.502327] sd 13:0:0:0: [sdb] Write Protect is off
[ 1618.502336] sd 13:0:0:0: [sdb] Mode Sense: 43 00 00 00
[ 1618.502342] sd 13:0:0:0: [sdb] Assuming drive cache: write through
[ 1618.514435] sd 13:0:0:0: [sdb] 507904 512-byte hardware sectors: (260 MB/248 MiB)
[ 1618.517665] sd 13:0:0:0: [sdb] Write Protect is off
[ 1618.517674] sd 13:0:0:0: [sdb] Mode Sense: 43 00 00 00
[ 1618.517680] sd 13:0:0:0: [sdb] Assuming drive cache: write through
[ 1618.517694]  sdb: sdb1
[ 1618.525459] sd 13:0:0:0: [sdb] Attached SCSI removable disk
[ 1618.526042] sd 13:0:0:0: Attached scsi generic sg2 type 0
[ 1667.637144] usb 5-2: USB disconnect, address 4
[ 1667.641318] scsi 13:0:0:0: rejecting I/O to dead device
[ 1667.641338] scsi 13:0:0:0: rejecting I/O to dead device
[ 1667.641351] scsi 13:0:0:0: rejecting I/O to dead device
[ 1667.641359] scsi 13:0:0:0: [sdb] READ CAPACITY failed
[ 1667.641364] scsi 13:0:0:0: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK,SUGGEST_OK
[ 1667.641374] scsi 13:0:0:0: [sdb] Sense not available.
[ 1667.641385] scsi 13:0:0:0: rejecting I/O to dead device
[ 1667.641394] scsi 13:0:0:0: [sdb] Write Protect is off
[ 1667.641400] scsi 13:0:0:0: [sdb] Mode Sense:

Rispondo a una domanda di un precedente post. La internet Key è marcata ALCATEL. Sai dirmi come evitare post così chilometrici?
Grazie
Avatar utente
CaioGiulioCesare
Prode Principiante
 
Messaggi: 37
Iscrizione: febbraio 2008
Desktop: GNOME
Distribuzione: Ubuntu

Re: [Internet] Internet Key USB HSPA One Touch X060S

Messaggioda Danx » giovedì 16 luglio 2009, 18:20

per quanto riguarda i post quando scrivi una risposta clicca su opzioni aggiuntive in basso poi usando sfoglia alleghi il file di interesse basta che gli dai l'estensione giusta per esempio .txt, crei un file vuoto sul desktop e ci incolli dentro le righe, per il resto stò cercando
Avatar utente
Danx
Entusiasta Emergente
Entusiasta Emergente
 
Messaggi: 1853
Iscrizione: ottobre 2008

Re: [Internet] Internet Key USB HSPA One Touch X060S

Messaggioda Danx » giovedì 16 luglio 2009, 18:44

dunque, nel file usb_modeswitch.conf modifica la voce target product in f000 cioè deve essere uguale a default product, poi i comandi in questo ordine


sudo modprobe usbserial vendor=0x1bbb product=0xf000
sudo usb_modeswitch

dopo posta dmesg e lsusb
Avatar utente
Danx
Entusiasta Emergente
Entusiasta Emergente
 
Messaggi: 1853
Iscrizione: ottobre 2008

[Internet] Re: [Internet] Internet Key USB HSPA One Touch X060S

Messaggioda CaioGiulioCesare » domenica 19 luglio 2009, 20:32

Ciao Danx, scusa l'assenza.
Ho reinstallato ubuntu 9.04 x delle problematiche.
Ho reinstallato usb_modeswith.conf e ricompilato con le linee di codice che mi hai suggerito qualche post fa.
Son stato attento a che target product e default product riportassero f000.
Ho dato in sequenza i comandi:

sudo modprobe usbserial vendor=0x1bbb product=0xf000
sudo usb_modeswitch

ed ho ricevuto come risposta:

Poi ho dato dmesg e lsusb e ti posto in sequenza i risultati:
Allegati
dmesg.txt
(34.44 KiB) Scaricato 51 volte
lsusb.txt
(648 Byte) Scaricato 43 volte
primo.txt
(395 Byte) Scaricato 97 volte
Avatar utente
CaioGiulioCesare
Prode Principiante
 
Messaggi: 37
Iscrizione: febbraio 2008
Desktop: GNOME
Distribuzione: Ubuntu

[Internet] Re: [Internet] Internet Key USB HSPA One Touch X060S

Messaggioda CaioGiulioCesare » domenica 19 luglio 2009, 20:44

>:(

ho reiavviato.. vede la internet key nuovamente come memoria di massa esterna

>:(
Avatar utente
CaioGiulioCesare
Prode Principiante
 
Messaggi: 37
Iscrizione: febbraio 2008
Desktop: GNOME
Distribuzione: Ubuntu

Re: [Internet] Internet Key USB HSPA One Touch X060S

Messaggioda Danx » domenica 19 luglio 2009, 23:10

secondo me hai sbagliato qualcosa in usb_modeswitch.conf dall'errore che esce "Error: no MessageEndpoint given. Aborting", controlla bene che sia tutto in ordine carattere per carattere

########################################################
# Alcatel X060

DefaultVendor=  0x1bbb
DefaultProduct= 0xf000

TargetVendor=  0x1bbb
TargetProduct=  0xf000

# only for reference
# MessageEndpoint=0x01

MessageContent="55534243123456788000000080000606f50402527000000000000000000000"
########################################################

poi dai nuovamente i comandi però con qualche modifica



sudo usb_modeswitch
sudo modprobe usbserial vendor=0x1bbb product=0x0000

se usb_modeswitch fà errore allora dai questi comandi

sudo modprobe usbserial vendor=0x1bbb product=0xf000
sudo usb_modeswitch
sudo modprobe usbserial vendor=0x1bbb product=0x0000

in ogni caso postami lsusb
Avatar utente
Danx
Entusiasta Emergente
Entusiasta Emergente
 
Messaggi: 1853
Iscrizione: ottobre 2008

[Internet] Re: [Internet] Internet Key USB HSPA One Touch X060S

Messaggioda CaioGiulioCesare » lunedì 20 luglio 2009, 19:11

Cia Danx,
ho fatto quando mi hai indicato. In primis ho fatto un copia/incolla delle righe #Alcatel X060 nel file usb_modeswith.conf che si trova in /etc.

Poi ho digitato:
sudo usb_modeswitch
ottenendo il messaggio di errore che ti posto:

* usb_modeswitch: tool for controlling "flip flop" mode USB devices
* Version 0.9.7beta (C) Josua Dietze 2009
* Works with libusb 0.1.12 and probably other versions

Error: no MessageEndpoint given. Aborting.

Ho dato il comando:
sudo modprobe usbserial vendor=0x1bbb product=0x0000

ma non ho avuto risposta, sicché ho dato lsusb e ti posto il risultato:
salvo@shadow-laptop:/etc$ lsusb

Bus 002 Device 004: ID 1bbb:f000 T & A Mobile Phones
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 04f2:b008 Chicony Electronics Co., Ltd
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

Ho quindi digitato le ultime righe di codice da te indicate, il comando lsusb richiestomi ed ho ottenuto quanto segue:

salvo@shadow-laptop:/etc$ sudo modprobe usbserial vendor=0x1bbb product=0xf000
salvo@shadow-laptop:/etc$ sudo usb_modeswitch


* usb_modeswitch: tool for controlling "flip flop" mode USB devices
* Version 0.9.7beta (C) Josua Dietze 2009
* Works with libusb 0.1.12 and probably other versions

Error: no MessageEndpoint given. Aborting.



salvo@shadow-laptop:/etc$ sudo modprobe usbserial vendor=0x1bbb product=0x0000

salvo@shadow-laptop:/etc$ lsusb
Bus 002 Device 004: ID 1bbb:f000 T & A Mobile Phones
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 04f2:b008 Chicony Electronics Co., Ltd
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

:(
Avatar utente
CaioGiulioCesare
Prode Principiante
 
Messaggi: 37
Iscrizione: febbraio 2008
Desktop: GNOME
Distribuzione: Ubuntu

Re: [Internet] Internet Key USB HSPA One Touch X060S

Messaggioda Danx » lunedì 20 luglio 2009, 19:32

nel file usb_modeswitch.conf decommenta (cioè togli il punto e virgola o il cancelletto in altri casi) che si trova prima della riga message endopoint e riprova
Avatar utente
Danx
Entusiasta Emergente
Entusiasta Emergente
 
Messaggi: 1853
Iscrizione: ottobre 2008

[Internet] Re: [Internet] Internet Key USB HSPA One Touch X060S

Messaggioda CaioGiulioCesare » lunedì 20 luglio 2009, 20:36

Ok Danx, ho eliminato il cancelletto che si trova nella riga message endopoint e ho dato il comando sudo usb_modeswicht. Il risultato è stato:

* usb_modeswitch: tool for controlling "flip flop" mode USB devices
* Version 0.9.7beta (C) Josua Dietze 2009
* Works with libusb 0.1.12 and probably other versions

Looking for target devices ...

Found devices in target mode or class (1)
Looking for default devices ...

Found default devices (1)
Prepare switching, accessing device 002 on bus 002 ...

Looking for active driver ...
OK, driver found ("usb-storage")
OK, driver "usb-storage" detached

Setting up communication with interface 0 ...
Trying to send the message to endpoint 0x01 ...

OK, message successfully sent
-> Run lsusb to note any changes. Bye


Il comando lsusb ha reso:

Bus 002 Device 004: ID 1bbb:0000 T & A Mobile Phones
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 04f2:b008 Chicony Electronics Co., Ltd

Ora?  :)
Avatar utente
CaioGiulioCesare
Prode Principiante
 
Messaggi: 37
Iscrizione: febbraio 2008
Desktop: GNOME
Distribuzione: Ubuntu

Re: [Internet] Internet Key USB HSPA One Touch X060S

Messaggioda Danx » lunedì 20 luglio 2009, 23:11

questo "OK, message successfully sent" significa che adesso ti puoi connettere, prova a vedere se network manager ti rileva il modem : click destro sull'icona in alto a destra - modifica connessioni -banda larga mobile - aggiungi
Avatar utente
Danx
Entusiasta Emergente
Entusiasta Emergente
 
Messaggi: 1853
Iscrizione: ottobre 2008

Successiva

Torna a Driver e periferiche

Chi c’è in linea

Visualizzano questa sezione: 0 utenti registrati e 12 ospiti