[Wireless] Problema attivazione Intel Corporation PRO/Wireless 2200BG

[Guiodic]

modello del computer?

[.Dex]

è un assemblato non ha marca

[Guiodic]

ah, bella roba.

ma la marca della scheda madre?

[.Dex]

dovrebbe esserci tutto spero

diego@Gubuntu:~$ sudo lshw
gubuntu                 
    description: Notebook
    product: `�A
    version: -1
    serial: 96NDU01G05504085DBK000
    width: 32 bits
    capabilities: smbios-2.31 dmi-2.31
    configuration: boot=oem-specific chassis=notebook uuid=816330A0-7509-11D9-8F2B-F743E84546ED
  *-core
      description: Motherboard
      physical id: 0
      version: Rev.A
      serial: 96NDU01G05504085DBK000
    *-firmware
          description: BIOS
          vendor: Phoenix Technologies LTD
          physical id: 0
          version: R01-A1J (11/08/2004)
          size: 105KiB
          capacity: 448KiB
          capabilities: isa pci pcmcia pnp apm upgrade shadowing escd acpi usb agp smartbattery biosbootspecification
    *-cpu
          description: CPU
          product: Intel(R) Celeron(R) M processor        1500MHz
          vendor: Intel Corp.
          physical id: 4
          bus info: cpu@0
          version: 6.9.5
          slot: U1
          size: 1500MHz
          capacity: 2400MHz
          width: 32 bits
          clock: 133MHz
          capabilities: fpu fpu_exception wp vme de pse tsc msr mce cx8 sep mtrr pge mca cmov pat clflush dts acpi mmx fxsr sse sse2 tm pbe up bts
        *-cache:0
            description: L1 cache
            physical id: 8
            slot: L1 Cache
            size: 32KiB
            capacity: 32KiB
            capabilities: asynchronous internal write-back
        *-cache:1
            description: L2 cache
            physical id: 9
            slot: L2 Cache
            size: 512KiB
            capacity: 1MiB
            capabilities: burst internal write-back unified
    *-memory
          description: System Memory
          physical id: 1b
          slot: System board or motherboard
          size: 512MiB
          capacity: 512MiB
        *-bank:0
            description: DIMM DDR Synchronous [empty]
            physical id: 0
            slot: J6A
        *-bank:1
            description: DIMM DDR Synchronous
            physical id: 1
            slot: J7A
            size: 512MiB
            width: 64 bits
    *-pci
          description: Host bridge
          product: 82855PM Processor to I/O Controller
          vendor: Intel Corporation
          physical id: 100
          bus info: pci@0000:00:00.0
          version: 21
          width: 32 bits
          clock: 33MHz
          configuration: driver=agpgart-intel module=intel_agp
        *-pci:0
            description: PCI bridge
            product: 82855PM Processor to AGP Controller
            vendor: Intel Corporation
            physical id: 1
            bus info: pci@0000:00:01.0
            version: 21
            width: 32 bits
            clock: 66MHz
            capabilities: pci bus_master
          *-display UNCLAIMED
                description: VGA compatible controller
                product: RV350 [Mobility Radeon 9600 M10]
                vendor: ATI Technologies Inc
                physical id: 0
                bus info: pci@0000:01:00.0
                version: 00
                width: 32 bits
                clock: 66MHz
                capabilities: agp agp-2.0 pm bus_master cap_list
                configuration: latency=66 mingnt=8
        *-usb:0
            description: USB Controller
            product: 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1
            vendor: Intel Corporation
            physical id: 1d
            bus info: pci@0000:00:1d.0
            version: 03
            width: 32 bits
            clock: 33MHz
            capabilities: bus_master
            configuration: driver=uhci_hcd latency=0 module=uhci_hcd
        *-usb:1
            description: USB Controller
            product: 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2
            vendor: Intel Corporation
            physical id: 1d.1
            bus info: pci@0000:00:1d.1
            version: 03
            width: 32 bits
            clock: 33MHz
            capabilities: bus_master
            configuration: driver=uhci_hcd latency=0 module=uhci_hcd
        *-usb:2
            description: USB Controller
            product: 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3
            vendor: Intel Corporation
            physical id: 1d.2
            bus info: pci@0000:00:1d.2
            version: 03
            width: 32 bits
            clock: 33MHz
            capabilities: bus_master
            configuration: driver=uhci_hcd latency=0 module=uhci_hcd
        *-usb:3
            description: USB Controller
            product: 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller
            vendor: Intel Corporation
            physical id: 1d.7
            bus info: pci@0000:00:1d.7
            version: 03
            width: 32 bits
            clock: 33MHz
            capabilities: pm debug bus_master cap_list
            configuration: driver=ehci_hcd latency=0 module=ehci_hcd
        *-pci:1
            description: PCI bridge
            product: 82801 Mobile PCI Bridge
            vendor: Intel Corporation
            physical id: 1e
            bus info: pci@0000:00:1e.0
            version: 83
            width: 32 bits
            clock: 33MHz
            capabilities: pci bus_master
          *-network:0
                description: Ethernet interface
                product: BCM4401 100Base-T
                vendor: Broadcom Corporation
                physical id: 5
                bus info: pci@0000:02:05.0
                logical name: eth0
                version: 01
                serial: 00:0a:e4:a4:12:dd
                size: 100MB/s
                capacity: 100MB/s
                width: 32 bits
                clock: 33MHz
                capabilities: pm bus_master cap_list ethernet physical mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
                configuration: autonegotiation=on broadcast=yes driver=b44 driverversion=2.0 duplex=full ip=192.168.1.135 latency=64 link=yes module=ssb multicast=yes port=twisted pair speed=100MB/s
          *-network:1
                description: Wireless interface
                product: PRO/Wireless 2200BG [Calexico2] Network Connection
                vendor: Intel Corporation
                physical id: 6
                bus info: pci@0000:02:06.0
                logical name: eth1
                version: 05
                serial: 00:0e:35:f2:ca:81
                width: 32 bits
                clock: 33MHz
                capabilities: pm bus_master cap_list ethernet physical wireless
                configuration: broadcast=yes driver=ipw2200 driverversion=1.2.2kmprq firmware=ABG:9.0.2.6 (Mar 22 2005) latency=64 link=no maxlatency=24 mingnt=3 module=ipw2200 multicast=yes wireless=radio off
          *-pcmcia:0
                description: CardBus bridge
                product: RL5c476 II
                vendor: Ricoh Co Ltd
                physical id: 9
                bus info: pci@0000:02:09.0
                version: ac
                width: 64 bits
                clock: 33MHz
                capabilities: pcmcia bus_master cap_list
                configuration: driver=yenta_cardbus latency=176 maxlatency=5 mingnt=128 module=yenta_socket
                resources: iomemory:b00603020-b0060301f
          *-pcmcia:1
                description: CardBus bridge
                product: RL5c476 II
                vendor: Ricoh Co Ltd
                physical id: 9.1
                bus info: pci@0000:02:09.1
                version: ac
                width: 64 bits
                clock: 33MHz
                capabilities: pcmcia bus_master cap_list
                configuration: driver=yenta_cardbus latency=176 maxlatency=5 mingnt=128 module=yenta_socket
                resources: iomemory:b00a07020-b00a0701f
          *-firewire
                description: FireWire (IEEE 1394)
                product: R5C552 IEEE 1394 Controller
                vendor: Ricoh Co Ltd
                physical id: 9.2
                bus info: pci@0000:02:09.2
                version: 04
                width: 32 bits
                clock: 33MHz
                capabilities: pm bus_master cap_list
                configuration: driver=ohci1394 latency=64 maxlatency=4 mingnt=2 module=ohci1394
        *-isa
            description: ISA bridge
            product: 82801DBM (ICH4-M) LPC Interface Bridge
            vendor: Intel Corporation
            physical id: 1f
            bus info: pci@0000:00:1f.0
            version: 03
            width: 32 bits
            clock: 33MHz
            capabilities: isa bus_master
            configuration: latency=0
        *-ide
            description: IDE interface
            product: 82801DBM (ICH4-M) IDE Controller
            vendor: Intel Corporation
            physical id: 1f.1
            bus info: pci@0000:00:1f.1
            logical name: scsi0
            logical name: scsi1
            version: 03
            width: 32 bits
            clock: 33MHz
            capabilities: ide bus_master emulated
            configuration: driver=ata_piix latency=0
          *-disk
                description: ATA Disk
                product: HTE726060M9AT00
                physical id: 0
                bus info: scsi@0:0.0.0
                logical name: /dev/sda
                version: MH4O
                serial: MRH4X5M4H6RJGB
                size: 55GiB (60GB)
                capabilities: partitioned partitioned:dos
                configuration: ansiversion=5 signature=11981197
              *-volume:0
                  description: EXT3 volume
                  vendor: Linux
                  physical id: 1
                  bus info: scsi@0:0.0.0,1
                  logical name: /dev/sda1
                  logical name: /
                  version: 1.0
                  serial: d89ce0ec-b888-45c1-9616-5b600e416277
                  size: 54GiB
                  capacity: 54GiB
                  capabilities: primary bootable journaled extended_attributes large_files ext3 ext2 initialized
                  configuration: created=2009-05-08 19:53:30 filesystem=ext3 modified=2009-05-11 17:14:27 mount.fstype=ext3 mount.options=rw,relatime,errors=remount-ro,data=ordered mounted=2009-05-11 17:12:13 state=mounted
              *-volume:1
                  description: Extended partition
                  physical id: 2
                  bus info: scsi@0:0.0.0,2
                  logical name: /dev/sda2
                  size: 1451MiB
                  capacity: 1451MiB
                  capabilities: primary extended partitioned partitioned:extended
                *-logicalvolume
                      description: Linux swap / Solaris partition
                      physical id: 5
                      logical name: /dev/sda5
                      capacity: 1451MiB
                      capabilities: nofs
          *-cdrom
                description: DVD writer
                product: DVD+-RW SDW-082
                vendor: QSI
                physical id: 1
                bus info: scsi@1:0.0.0
                logical name: /dev/cdrom
                logical name: /dev/cdrw
                logical name: /dev/dvd
                logical name: /dev/dvdrw
                logical name: /dev/scd0
                logical name: /dev/sr0
                version: LX32
                capabilities: removable audio cd-r cd-rw dvd dvd-r
                configuration: ansiversion=5 status=nodisc
        *-serial UNCLAIMED
            description: SMBus
            product: 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller
            vendor: Intel Corporation
            physical id: 1f.3
            bus info: pci@0000:00:1f.3
            version: 03
            width: 32 bits
            clock: 33MHz
            configuration: latency=0
        *-multimedia
            description: Multimedia audio controller
            product: 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller
            vendor: Intel Corporation
            physical id: 1f.5
            bus info: pci@0000:00:1f.5
            version: 03
            width: 32 bits
            clock: 33MHz
            capabilities: pm bus_master cap_list
            configuration: driver=Intel ICH latency=0 module=snd_intel8x0
        *-communication UNCLAIMED
            description: Modem
            product: 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller
            vendor: Intel Corporation
            physical id: 1f.6
            bus info: pci@0000:00:1f.6
            version: 03
            width: 32 bits
            clock: 33MHz
            capabilities: pm cap_list
            configuration: latency=0
  *-network DISABLED
      description: Ethernet interface
      physical id: 1
      logical name: pan0
      serial: 66:59:1e:69:94:4a
      capabilities: ethernet physical
      configuration: broadcast=yes driver=bridge driverversion=2.3 firmware=N/A link=yes multicast=yes

[dav2dev]

dex, tieni sempre aperto Sistema→amministrazione→visualizzatore file di registro, con selezionato "syslog", i messaggi di log interessanti spuntano fuori lì. se mentre dai qualche comando spunta fuori qualche messaggio, copialo qua che magari se ne ricava qualche idea.

[Guiodic]

prova così:

1) da windows, pannello di controllo, sistema, gestione periferiche individua la scheda wifi e disattiva il risparmio energetico.
2) controlla se il risparmio energetico della WIFI è abilitato nel BIOS del computer, in tal caso disabilitalo.

[.Dex]

purtroppo non ho più windows,ho formattato tutto,non li ho affiancati
nel frattempo seguendo dav ho dato un'occhiata...è uscito questo che suona familiare

Gubuntu kernel: [  742.113566] ipw2200: Detected geography ZZR (14 802.11bg channels, 0 802.11a channels)
May 11 17:30:02 Gubuntu kernel: [  919.967350] ADDRCONF(NETDEV_UP): eth1: link is not ready
May 11 17:41:55 Gubuntu kernel: [ 1633.020812] pcmcia: Detected deprecated PCMCIA ioctl usage from process: lshw.
May 11 17:41:55 Gubuntu kernel: [ 1633.020817] pcmcia: This interface will soon be removed from the kernel; please expect breakage unless you upgrade to new tools.
May 11 17:41:55 Gubuntu kernel: [ 1633.020821] pcmcia: see http://www.kernel.org/pub/linux/utils/k ... cmcia.html for details.

[Guiodic]

hai visto nel bios?

[ethyl]

Kill switch must be turned off for wireless networking to work.

hai il pulsante del wifi spento

il kill switch non c'entra col pulsante. E' un modulo software che serve quando il pulsante manca. In questo caso va disabilitato per permettere al pulsante di funzionare.
Controlla che non ci sia la cartella /etc/ndiswrapper, nel caso cancellala a mano.

[Guiodic]

il kill switch non c'entra col pulsante

[167124.277631] ipw2200: Radio Frequency Kill Switch is On:
[167124.277636] Kill switch must be turned off for wireless networking to work.

Ottenuto premendo il pulsante e ricaricando il modulo.

[ethyl]

dipende dai notebook. Io ad esempio non ho un pulsante ma uno switch on/off. Ad ogni modo dovrebbe essere possibile settare il parametro al driver creando un file sotto /etc/modprobe.d

[simone164]

Ragazzi io ho unn problema con la stessa scheda wireless, anche se il problema è un pò meno grave in quanto il portatile mi riconosce la scheda e rileva anche la rete wireless del mio modem alice, purtroppo pero non riesco a connettermi potreste darmi qualche consiglio?????????????????

[.mauro.]

il kill switch non c'entra col pulsante

[167124.277631] ipw2200: Radio Frequency Kill Switch is On:
[167124.277636] Kill switch must be turned off for wireless networking to work.

Ottenuto premendo il pulsante e ricaricando il modulo.

io ho lo stesso problema di .Dex con karmic...

con intrepid e jaunty avevo risolto installando acerhk e facendo uno script che partiva all'avvio

#!/bin/sh
modprobe -r acerhk
modprobe acerhk poll=1 autowlan=1 verbose=3 force_series=290
echo on> /proc/driver/acerhk/wirelessled

ma adesso passando a karmic si ripropone il problema e la vecchia soluzione non funziona più, qualcuno ha qualche idea?
il mio portatile è un Acer TravelMate 292LMi con Intel PRO/Wireless 2200BG

a differenza di .Dex ho ancora XP e con Intel PRO Set Wireless riesco ad accendere (anche in XP c'era lo stesso problema... ), però vorrei trovare una soluzione solo con linux

[.mauro.]

ho trovato la soluzione compilando acerhk (e risolvendo alcuni problemi nella compilazione)

dopo aver scompattato il file acerhk-0.5.35.orig.tar.gz entrare nella cartella e aprire un terminale come root

# ./configure
# make
# make install

dando # make a me sono comparsi alcuni errori:

debian:/home/acerhk-0.5.35# make
make -C /lib/modules/`uname -r`/build SUBDIRS=/home/acerhk-0.5.35 modules
make[1]: Entering directory `/usr/src/linux-headers-2.6.32-trunk-686'
/usr/src/linux-headers-2.6.32-trunk-common/scripts/Makefile.build:49: *** CFLAGS was changed in "/home/acerhk-0.5.35/Makefile". Fix it to use EXTRA_CFLAGS. Stop.
make[3]: *** [_module_/home/acerhk-0.5.35] Error 2
make[2]: *** [sub-make] Error 2
make[1]: *** [all] Error 2
make[1]: Leaving directory `/usr/src/linux-headers-2.6.32-trunk-686' make: *** [acerhk.ko] Error 2

SOLUZIONE aprire il file Makefile e inserire EXTRA_CFLAGS= al posto di CFLAGS+=


debian:/home/acerhk-0.5.35# make
make -C /lib/modules/`uname -r`/build SUBDIRS=/home/acerhk-0.5.35 modules
make[1]: Entering directory `/usr/src/linux-headers-2.6.32-trunk-686' CC [M] /home/acerhk-0.5.35/acerhk.o /home/acerhk-0.5.35/acerhk.c: In function 'init_input':
/home/acerhk-0.5.35/acerhk.c warning: ignoring return value of 'input_register_device', declared with attribute warn_unused_result
/home/acerhk-0.5.35/acerhk.c: In function 'acerhk_proc_init':
/home/acerhk-0.5.35/acerhk.c error: 'struct proc_dir_entry' has no member named 'owner'
/home/acerhk-0.5.35/acerhk.c error: 'struct proc_dir_entry' has no member named 'owner'
/home/acerhk-0.5.35/acerhk.c error: 'struct proc_dir_entry' has no member named 'owner'
/home/acerhk-0.5.35/acerhk.c error: 'struct proc_dir_entry' has no member named 'owner'
/home/acerhk-0.5.35/acerhk.c error: 'struct proc_dir_entry' has no member named 'owner'
/home/acerhk-0.5.35/acerhk.c error: 'struct proc_dir_entry' has no member named 'owner'
make[4]: *** [/home/acerhk-0.5.35/acerhk.o] Error 1
make[3]: *** [_module_/home/acerhk-0.5.35] Error 2
make[2]: *** [sub-make] Error 2
make[1]: *** [all] Error 2
make[1]: Leaving directory `/usr/src/linux-headers-2.6.32-trunk-686' make: *** [acerhk.ko] Error 2

SOLUZIONE aprire il file acerhk.c e inserire per ogni riga in cui segnala errore partendo dall'ultima in fondo


#if LINUX_VERSION_CODE owner = THIS_MODULE;
#endif

debian:/home/acerhk-0.5.35# make
make -C /lib/modules/`uname -r`/build SUBDIRS=/home/acerhk-0.5.35 modules
make[1]: Entering directory `/usr/src/linux-headers-2.6.32-trunk-686' CC [M]
/home/acerhk-0.5.35/acerhk.o /home/acerhk-0.5.35/acerhk.c: In function 'init_input':
/home/acerhk-0.5.35/acerhk.c warning: ignoring return value of 'input_register_device', declared with attribute warn_unused_result
Building modules, stage 2.

MODPOST 1 modules WARNING: modpost: Found 2 section mismatch(es). To see full details build your kernel with: 'make CONFIG_DEBUG_SECTION_MISMATCH=y' CC
/home/acerhk-0.5.35/acerhk.mod.o LD [M] /home/acerhk-0.5.35/acerhk.ko
make[1]: Leaving directory `/usr/src/linux-headers-2.6.32-trunk-686'



Ringrazio Omar Crea per l'assistenza


adesso si accende coi comandi

modprobe -r acerhk
modprobe acerhk poll=1 autowlan=1 verbose=3 force_series=290
echo on> /proc/driver/acerhk/wirelessled

(meglio se in uno script .sh in /etc/init.d che parte all'avvio ; )