[risolto] scanner plustek opticslim m12

[maurilucc]

buongiorno a tutti, vorrei installare lo scanner in oggetto sul mio portatile, ho provato a seguire questa strada :

http://help.ubuntu-it.org/current/ubunt ... #id3065661

ma senza alcun risultato



questo è l'esito di scanimage -L

mauri@mauri-laptop:~$ scanimage -L

No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
mauri@mauri-laptop:~$

e questo quello di sane-find-scanner

mauri@mauri-laptop:~$ sane-find-scanner

 # sane-find-scanner will now attempt to detect your scanner. If the
 # result is different from what you expected, first make sure your
 # scanner is powered up and properly connected to your computer.

 # No SCSI scanners found. If you expected something different, make sure that
 # you have loaded a kernel SCSI driver for your SCSI adapter.

found USB scanner (vendor=0x07b3, product=0x0412 [600dpi USB Scanner], chip=GT-6816?) at libusb:003:002
 # Your USB scanner was (probably) detected. It may or may not be supported by
 # SANE. Try scanimage -L and read the backend's manpage.

 # Not checking for parallel port scanners.

 # Most Scanners connected to the parallel port or other proprietary ports
 # can't be detected by this program.

 # You may want to run this program as root to find all devices. Once you
 # found the scanner devices, be sure to adjust access permissions as
 # necessary.


se può servire anche lsusb :

mauri@mauri-laptop:~$ lsusb
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 002: ID 03f0:231d Hewlett-Packard
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 07b3:0412 Plustek, Inc. Scanner
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 04f2:b159 Chicony Electronics Co., Ltd
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


mi piacerebbe molto riuscire ad utilizzare quest'oggettino

ciao e grazie a tutti
Mauri

[ethyl]

il tuo scanner è supportato, probabilmente ti manca il firmware che puoi scaricare da qui.
http://gkall.hobby.nl/gt6816-07b3-0412.html

[maurilucc]

ti ringrazio molto per la risposta, me le daresti 2 dritte per come usare il firmware?  :-[

ho copiato il firmware "cism216.fw dd 23-12-2003"  in /usr/share/sane/gt68xx/

ma purtroppo non è cambiato nulla

grazie

[ethyl]

posta il contenuto di questo file

Codice: Seleziona tutto

 gedit /etc/sane.d/gt68xx.conf

[maurilucc]

presumo ti serva solo questa parte ....

##############################################################################
# Autodetect Plustek OpticSlim M12 and NeatReceipts Scanalizer Professional 2.5
usb 0x07b3 0x0412
#vendor "NeatReceipts"
#model "Scanalizer Professional 2.5"

##############################################################################

prima di levare i # attendo tue istruzioni

intanto ti ringrazio tanto per l'interessamento

[ethyl]

controlla con

Codice: Seleziona tutto

dmesg |grep usb

che ti dice

[maurilucc]

ero troppo curioso, non ho resistito ...... e prima della tua risposta ho levato i # ed è andato tutto !!!

ti posto comunque il dmesg |grep usb:

mauri@mauri-laptop:~$ dmesg |grep usb
[    0.581318] usbcore: registered new interface driver usbfs
[    0.581318] usbcore: registered new interface driver hub
[    0.581318] usbcore: registered new device driver usb
[    0.650147] usb usb1: configuration #1 chosen from 1 choice
[    0.670111] usb usb2: configuration #1 chosen from 1 choice
[    0.734128] usb usb3: configuration #1 chosen from 1 choice
[    0.794139] usb usb4: configuration #1 chosen from 1 choice
[    0.854133] usb usb5: configuration #1 chosen from 1 choice
[    0.914168] usb usb6: configuration #1 chosen from 1 choice
[    0.974120] usb usb7: configuration #1 chosen from 1 choice
[    1.091409] usb 2-2: new high speed USB device using ehci_hcd and address 2
[    1.280734] usb 2-2: configuration #1 chosen from 1 choice
[    1.740094] usb 3-1: new full speed USB device using ohci_hcd and address 2
[    1.929182] usb 3-1: configuration #1 chosen from 1 choice
[    2.260049] usb 6-3: new full speed USB device using ohci_hcd and address 2
[    2.457162] usb 6-3: configuration #1 chosen from 1 choice
[  10.408559] usbcore: registered new interface driver btusb
[  10.490111] input: CNF8243 as /devices/pci0000:00/0000:00:13.2/usb2/2-2/2-2:1.0/input/input6
[  10.490180] usbcore: registered new interface driver uvcvideo
[  13.450041] usb 3-3: new low speed USB device using ohci_hcd and address 3
[  13.643662] usb 3-3: configuration #1 chosen from 1 choice
[  13.744923] usbcore: registered new interface driver hiddev
[  13.752152] input: MLK Trust Mouse 16343 as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.0/input/input11
[  13.752348] generic-usb 0003:04FC:05DA.0001: input,hiddev96,hidraw0: USB HID v1.10 Mouse [MLK Trust Mouse 16343] on usb-0000:00:12.0-3/input0
[  13.752380] usbcore: registered new interface driver usbhid
[  13.752383] usbhid: v2.6:USB HID core driver
[  769.471110] usb 3-1: USB disconnect, address 2
[  794.600084] usb 1-1: new high speed USB device using ehci_hcd and address 4
[  794.752886] usb 1-1: configuration #1 chosen from 1 choice
[  794.834158] usbcore: registered new interface driver usb-storage
[  794.836362] usb-storage: device found at 4
[  794.836373] usb-storage: waiting for device to settle before scanning
[  799.830918] usb-storage: device scan complete
[ 1383.114017] usb 1-1: USB disconnect, address 4
[ 1447.711330] usb 1-1: new high speed USB device using ehci_hcd and address 5
[ 1447.862405] usb 1-1: configuration #1 chosen from 1 choice
[ 1447.872172] usb-storage: device found at 5
[ 1447.872179] usb-storage: waiting for device to settle before scanning
[ 1452.870605] usb-storage: device scan complete
[ 2703.721049] usb 1-1: USB disconnect, address 5
[ 5084.130108] usb 3-1: new full speed USB device using ohci_hcd and address 4
[ 5084.509004] usb 3-1: configuration #1 chosen from 1 choice



grazie infinite per l'aiuto