Stampante/scanner HP non funziona
- il 21esimo
- Prode Principiante
- Messaggi: 188
- Iscrizione: domenica 14 novembre 2010, 16:19
- Località: Provincia di Foggia
Stampante/scanner HP non funziona
Ciao a tutti. Oggi ho installato K 20.04 e la mia stampante/scanner HP deskjet 3760 non funziona, nonostante il sistema il sistema l'abbia riconosciuta ed installata. Sapete quale può essere il problema? Grazie!
-
- Rampante Reduce
- Messaggi: 5460
- Iscrizione: domenica 20 gennaio 2008, 1:13
- Desktop: Kubuntu
- Distribuzione: 20.04 x64
- Contatti:
Re: Stampante/scanner HP non funziona
Hai verificato se esiste una versione successiva di hplip rispetto a quella da te installata?
Sono colui che fa cose che non servono...
Secondo Principio di Dilbert, di Scott Adams. "Si parte dalla certezza che siamo tutti idioti". Ed alcuni su questo mi ab-battono alla grande.
Come certificato dalla moderazione, incivile e maleducato. You have been warned.
Secondo Principio di Dilbert, di Scott Adams. "Si parte dalla certezza che siamo tutti idioti". Ed alcuni su questo mi ab-battono alla grande.
Come certificato dalla moderazione, incivile e maleducato. You have been warned.
- tom tom
- Entusiasta Emergente
- Messaggi: 1373
- Iscrizione: giovedì 6 novembre 2008, 8:53
- Desktop: gnome shell
- Distribuzione: ubuntu 22.04
- Località: torino
Re: Stampante/scanner HP non funziona
Ciao, ho lo stesso problema con una HP, ma Office 3835, su ubuntu 20.04, se n'è parlato in questa discussione viewtopic.php?f=124&t=639445
Provvisoriamente ho risolto collegando la stampante tramite wifi.
Provvisoriamente ho risolto collegando la stampante tramite wifi.
Quando la NASA iniziò i lanci spaziali,si accorsero che le penne non scrivevano senza gravità. Impiegarono 10 anni e 12 milioni di dollari per una penna che potesse scrivere con gravità 0 ...I russi usavano una matita...
- Sevin
- Scoppiettante Seguace
- Messaggi: 413
- Iscrizione: martedì 21 ottobre 2008, 12:05
- Desktop: ubuntu
- Distribuzione: Mint 20.1
- Sesso: Maschile
Re: Stampante/scanner HP non funziona
Mai mangiare la neve gialla!!!
- il 21esimo
- Prode Principiante
- Messaggi: 188
- Iscrizione: domenica 14 novembre 2010, 16:19
- Località: Provincia di Foggia
- il 21esimo
- Prode Principiante
- Messaggi: 188
- Iscrizione: domenica 14 novembre 2010, 16:19
- Località: Provincia di Foggia
Re: Stampante/scanner HP non funziona
Aggiornamento. Ho formattato il pc e installato ubuntu 20.04. La stampante viene riconosciuta automaticamente ma funziona solo la stampante, non lo scanner. Dritte?
-
- Prode Principiante
- Messaggi: 20
- Iscrizione: mercoledì 17 aprile 2019, 9:08
- Desktop: llinux
- Distribuzione: ubuntu 20.04 lts
Re: Stampante/scanner HP non funziona
ho lo stesso problema con la mia hp b110a, stampante ok scanner koil 21esimo ha scritto: ↑sabato 25 aprile 2020, 12:51Aggiornamento. Ho formattato il pc e installato ubuntu 20.04. La stampante viene riconosciuta automaticamente ma funziona solo la stampante, non lo scanner. Dritte? e
per lo scanner ho risolto momentaneamente da firefox http://192.168.1.60/# ovvio metti il tuo indirizzo ip della stampante.
speriamo risolvano presto.
-
- Prode Principiante
- Messaggi: 20
- Iscrizione: mercoledì 17 aprile 2019, 9:08
- Desktop: llinux
- Distribuzione: ubuntu 20.04 lts
Re: Stampante/scanner HP non funziona
ho risolto il tutto installando hplip gui.
- il 21esimo
- Prode Principiante
- Messaggi: 188
- Iscrizione: domenica 14 novembre 2010, 16:19
- Località: Provincia di Foggia
Re: Stampante/scanner HP non funziona
Io non ho risolto invece, neppure con hplip gui. Anzi, dando da terminale
mi vengono diversi errori
Aiuto!
Codice: Seleziona tutto
sudo hp-check -r
Codice: Seleziona tutto
HP Linux Imaging and Printing System (ver. 3.20.3)
Dependency/Version Check Utility ver. 15.1
Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling
the HPLIP supplied tarball (.tar.gz or .run) to determine if the proper
dependencies are installed to successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro
supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball
has the proper dependencies installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode
will check both of the above cases (both compile- and run-time dependencies).
Check types:
a. EXTERNALDEP - External Dependencies
b. GENERALDEP - General Dependencies (required both at compile and run time)
c. COMPILEDEP - Compile time Dependencies
d. [All are run-time checks]
PYEXT SCANCONF QUEUES PERMISSION
Status Types:
OK
MISSING - Missing Dependency or Permission or Plug-in
INCOMPAT - Incompatible dependency-version or Plugin-version
warning: ubuntu-20.04 version is not supported. Using ubuntu-19.10 versions dependencies to verify and install...
---------------
| SYSTEM INFO |
---------------
Kernel: 5.4.0-26-generic #30-Ubuntu SMP Mon Apr 20 16:58:30 UTC 2020 GNU/Linux
Host: fabio-MS-7B29
Proc: 5.4.0-26-generic #30-Ubuntu SMP Mon Apr 20 16:58:30 UTC 2020 GNU/Linux
Distribution: ubuntu 20.04
Bitness: 64 bit
-----------------------
| HPLIP CONFIGURATION |
-----------------------
HPLIP-Version: HPLIP 3.20.3
HPLIP-Home: /usr/share/hplip
warning: HPLIP-Installation: Auto installation is not supported for ubuntu distro 20.04 version
Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=3.20.3
[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/hplip/HP
ppdbase=/usr/share/ppd/hplip
doc=/usr/share/doc/hplip
html=/usr/share/doc/hplip-doc
icon=no
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv
bin=/usr/bin
apparmor=/etc/apparmor.d
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
libusb01-build=no
pp-build=no
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=yes
foomatic-drv-install=yes
foomatic-ppd-install=no
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.20.3
restricted-build=no
ui-toolkit=qt5
qt3=no
qt4=no
qt5=yes
policy-kit=yes
lite-build=no
udev_sysfs_rules=no
hpcups-only-build=no
hpijs-only-build=no
apparmor_build=no
class-driver=no
Current contents of '/var/lib/hp/hplip.state' file:
Plugins are not installed. Could not access file: No such file or directory
Current contents of '~/.hplip/hplip.conf' file:
warning: Could not access file: No such file or directory
<Package-name> <Package-Desc> <Required/Optional> <Min-Version> <Installed-Version> <Status> <Comment>
-------------------------
| External Dependencies |
-------------------------
error: cups CUPS - Common Unix Printing System REQUIRED 1.1 - INCOMPAT 'CUPS may not be installed or not running'
gs GhostScript - PostScript and PDF language interpreter and previewer REQUIRED 7.05 9.50 OK -
error: xsane xsane - Graphical scanner frontend for SANE OPTIONAL 0.9 - MISSING 'xsane needs to be installed'
scanimage scanimage - Shell scanning program OPTIONAL 1.0 1.0.29 OK -
error: dbus DBus - Message bus system REQUIRED - 1.12.16 MISSING 'DBUS may not be installed or not running'
policykit PolicyKit - Administrative policy framework OPTIONAL - 0.105 OK -
network network -wget OPTIONAL - 1.20.3 OK -
avahi-utils avahi-utils OPTIONAL - 0.7 OK -
------------------------
| General Dependencies |
------------------------
error: libjpeg libjpeg - JPEG library REQUIRED - - MISSING 'libjpeg needs to be installed'
error: cups-devel CUPS devel- Common Unix Printing System development files REQUIRED - - MISSING 'cups-devel needs to be installed'
error: cups-image CUPS image - CUPS image development files REQUIRED - - MISSING 'cups-image needs to be installed'
libpthread libpthread - POSIX threads library REQUIRED - b'2.31' OK -
error: libusb libusb - USB library REQUIRED - 1.0 MISSING 'libusb needs to be installed'
sane SANE - Scanning library REQUIRED - - OK -
error: sane-devel SANE - Scanning library development files REQUIRED - - MISSING 'sane-devel needs to be installed'
error: libnetsnmp-devel libnetsnmp-devel - SNMP networking library development files REQUIRED 5.0.9 - MISSING 'libnetsnmp-devel needs to be installed'
error: libcrypto libcrypto - OpenSSL cryptographic library REQUIRED - 1.1.1 MISSING 'libcrypto needs to be installed'
python3X Python 2.2 or greater - Python programming language REQUIRED 2.2 3.8.2 OK -
error: python3-notify2 Python libnotify - Python bindings for the libnotify Desktop notifications OPTIONAL - - MISSING 'python3-notify2 needs to be installed'
error: python3-pyqt4-dbus PyQt 4 DBus - DBus Support for PyQt4 OPTIONAL 4.0 - MISSING 'python3-pyqt4-dbus needs to be installed'
error: python3-pyqt4 PyQt 4- Qt interface for Python (for Qt version 4.x) REQUIRED 4.0 - MISSING 'python3-pyqt4 needs to be installed'
python3-dbus Python DBus - Python bindings for DBus REQUIRED 0.80.0 1.2.16 OK -
python3-xml Python XML libraries REQUIRED - 2.2.9 OK -
error: python3-devel Python devel - Python development files REQUIRED 2.2 3.8.2 MISSING 'python3-devel needs to be installed'
python3-pil PIL - Python Imaging Library (required for commandline scanning with hp-scan) OPTIONAL - 7.0.0 OK -
python3-reportlab Reportlab - PDF library for Python OPTIONAL 2.0 3.5.34 OK -
--------------
| COMPILEDEP |
--------------
error: libtool libtool - Library building support services REQUIRED - - MISSING 'libtool needs to be installed'
gcc gcc - GNU Project C and C++ Compiler REQUIRED - 9.3.0 OK -
make make - GNU make utility to maintain groups of programs REQUIRED 3.0 4.2.1 OK -
---------------------
| Python Extentions |
---------------------
cupsext CUPS-Extension REQUIRED - 3.20.3 OK -
hpmudext IO-Extension REQUIRED - 3.20.3 OK -
----------------------
| Scan Configuration |
----------------------
'/etc/sane.d/dll.d/hpaio' not found.
hpaio HPLIP-SANE-Backend REQUIRED - 3.20.3 OK 'hpaio found in /etc/sane.d/dll.conf'
scanext Scan-SANE-Extension REQUIRED - 3.20.3 OK -
------------------------------
| DISCOVERED SCANNER DEVICES |
------------------------------
device `hpaio:/usb/DeskJet_3700_series?serial=CN8BK6P144072S' is a Hewlett-Packard DeskJet_3700_series all-in-one
--------------------------
| DISCOVERED USB DEVICES |
--------------------------
Device URI Model
------------------------------- ----------------------
hp:/usb/DeskJet_3700_series?ser HP DeskJet 3700 series
ial=CN8BK6P144072S
---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------
DeskJet_3700
------------
Type: Printer
Device URI: hp:/usb/DeskJet_3700_series?serial=CN8BK6P144072S
PPD: /etc/cups/ppd/DeskJet_3700.ppd
PPD Description: HP Deskjet 3700 Series, hpcups 3.20.3
Printer status: la stampante DeskJet_3700 sta stampando DeskJet_3700-4. è stata abilitaProcessing page 1...0, 06:45:08
error: Unable to communicate with device (code=12): hp:/usb/DeskJet_3700_series?serial=CN8BK6P144072S
error: Device not found
error: Communication status: Failed
DeskJet_3700_series_CN8BK6P144072S_
-----------------------------------
Type: Unknown
Device URI: implicitclass://DeskJet_3700_series_CN8BK6P144072S_/
PPD: /etc/cups/ppd/DeskJet_3700_series_CN8BK6P144072S_.ppd
PPD Description: HP DeskJet 3700 series, driverless, cups-filters 1.27.4
Printer status: la stampante DeskJet_3700_series_CN8BK6P144072S_ è inattiva. è stata abilitata da lun 27 apr 2020, 06:44:25
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend for HP-Devices.
--------------
| PERMISSION |
--------------
USB DeskJet_3700 Required - - OK Node:'/dev/bus/usb/001/002' Perm:' root lp rw- rw- rw- rw- r--'
-----------
| SUMMARY |
-----------
Missing Required Dependencies
-----------------------------
error: 'libcups2' package is missing/incompatible
error: 'libdbus-1-dev' package is missing/incompatible
error: 'libjpeg-dev' package is missing/incompatible
error: 'libcups2-dev' package is missing/incompatible
error: 'cups-bsd' package is missing/incompatible
error: 'cups-client' package is missing/incompatible
error: 'libcupsimage2-dev' package is missing/incompatible
error: 'libusb-1.0.0-dev' package is missing/incompatible
error: 'libusb-0.1-4' package is missing/incompatible
error: 'libsane-dev' package is missing/incompatible
error: 'libsnmp-dev' package is missing/incompatible
error: 'snmp-mibs-downloader' package is missing/incompatible
error: 'openssl' package is missing/incompatible
error: 'python3-pyqt4' package is missing/incompatible
error: 'gtk2-engines-pixbuf' package is missing/incompatible
error: 'python3-dev' package is missing/incompatible
error: 'libtool' package is missing/incompatible
error: 'libtool-bin' package is missing/incompatible
Missing Optional Dependencies
-----------------------------
error: 'gtk2-engines-pixbuf' package is missing/incompatible
error: 'xsane' package is missing/incompatible
error: 'python3-notify2' package is missing/incompatible
error: 'python3-dbus.mainloop.qt' package is missing/incompatible
Total Errors: 16
Total Warnings: 2
- tom tom
- Entusiasta Emergente
- Messaggi: 1373
- Iscrizione: giovedì 6 novembre 2008, 8:53
- Desktop: gnome shell
- Distribuzione: ubuntu 22.04
- Località: torino
Re: Stampante/scanner HP non funziona
Riesumo la discussione, perchè, ad oggi, stampante e scanner ancora non funzionano , nonostante qualche aggiornamento delle librerie cups fatto oggi...
Spero che risolvano, perchè vedo che tanti hanno lo stesso problema con le stapanti HP.
EDIT: ho provato a dare il comando e a quanto pare manca il pacchetto python3-pyqt4 che, per altro, non si trova nemmeno su synaptic, ed ho installato un altro pacchetto marcato come mancane, ovvero sane-utils , senza ottenere risultati,mentre altri due pacchetti segnalati come missing/incompatible sono installati.
Aggiungo questo messagio, contenuto nell'output del comando sopra:
Spero che risolvano, perchè vedo che tanti hanno lo stesso problema con le stapanti HP.
EDIT: ho provato a dare il comando
Codice: Seleziona tutto
sudo hp-check -r
Aggiungo questo messagio, contenuto nell'output del comando sopra:
Da quel che capisco (poco) bisognerà attendere che risolvano gli sviluppatoriwarning: HPLIP-Installation: Auto installation is not supported for ubuntu distro 20.04 version
Quando la NASA iniziò i lanci spaziali,si accorsero che le penne non scrivevano senza gravità. Impiegarono 10 anni e 12 milioni di dollari per una penna che potesse scrivere con gravità 0 ...I russi usavano una matita...
- Sevin
- Scoppiettante Seguace
- Messaggi: 413
- Iscrizione: martedì 21 ottobre 2008, 12:05
- Desktop: ubuntu
- Distribuzione: Mint 20.1
- Sesso: Maschile
Re: Stampante/scanner HP non funziona
anche sto mandando molte benedizioni ai programmatori.
La mia ho envy4525 una volta stampa e dieci no, la cosa incredibile è proprio questo andamento random.... quando decide di stampare va benissimo, dopo 10 minuti se riprovo a volte va mentre altre volte dice che ci sono errori di comunicazione
Come scanner invece nessun problema
Ho installato hp-lip (aggiornato) e cups ma non riesco a risolvere. Qualche suggerimento oltre che passare a Win10 per stampare una pagina?
Questi alcuni dati che potrebbero essere utili
La mia ho envy4525 una volta stampa e dieci no, la cosa incredibile è proprio questo andamento random.... quando decide di stampare va benissimo, dopo 10 minuti se riprovo a volte va mentre altre volte dice che ci sono errori di comunicazione
Come scanner invece nessun problema
Ho installato hp-lip (aggiornato) e cups ma non riesco a risolvere. Qualche suggerimento oltre che passare a Win10 per stampare una pagina?
Questi alcuni dati che potrebbero essere utili
Codice: Seleziona tutto
mario@outremer:~$ sudo hp-check -r
[sudo] password di mario:
Saving output in log file: /home/mario/hp-check.log
HP Linux Imaging and Printing System (ver. 3.20.3)
Dependency/Version Check Utility ver. 15.1
Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the
HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies
are installed to successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro
supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball
has the proper dependencies installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode
will check both of the above cases (both compile- and run-time dependencies).
Check types:
a. EXTERNALDEP - External Dependencies
b. GENERALDEP - General Dependencies (required both at compile and run time)
c. COMPILEDEP - Compile time Dependencies
d. [All are run-time checks]
PYEXT SCANCONF QUEUES PERMISSION
Status Types:
OK
MISSING - Missing Dependency or Permission or Plug-in
INCOMPAT - Incompatible dependency-version or Plugin-version
warning: ubuntu-20.04 version is not supported. Using ubuntu-19.10 versions dependencies to verify and install...
---------------
| SYSTEM INFO |
---------------
Kernel: 5.4.0-29-generic #33-Ubuntu SMP Wed Apr 29 14:32:27 UTC 2020 GNU/Linux
Host: outremer
Proc: 5.4.0-29-generic #33-Ubuntu SMP Wed Apr 29 14:32:27 UTC 2020 GNU/Linux
Distribution: ubuntu 20.04
Bitness: 64 bit
-----------------------
| HPLIP CONFIGURATION |
-----------------------
HPLIP-Version: HPLIP 3.20.3
HPLIP-Home: /usr/share/hplip
warning: HPLIP-Installation: Auto installation is not supported for ubuntu distro 20.04 version
Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=3.20.3
[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/hplip/HP
ppdbase=/usr/share/ppd/hplip
doc=/usr/share/doc/hplip
html=/usr/share/doc/hplip-doc
icon=no
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv
bin=/usr/bin
apparmor=/etc/apparmor.d
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
libusb01-build=no
pp-build=no
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=yes
foomatic-drv-install=yes
foomatic-ppd-install=no
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.20.3
restricted-build=no
ui-toolkit=qt5
qt3=no
qt4=no
qt5=yes
policy-kit=yes
lite-build=no
udev_sysfs_rules=no
hpcups-only-build=no
hpijs-only-build=no
apparmor_build=no
class-driver=no
Current contents of '/var/lib/hp/hplip.state' file:
Plugins are not installed. Could not access file: No such file or directory
Current contents of '~/.hplip/hplip.conf' file:
warning: Could not access file: No such file or directory
<Package-name> <Package-Desc> <Required/Optional> <Min-Version> <Installed-Version> <Status> <Comment>
-------------------------
| External Dependencies |
-------------------------
error: cups CUPS - Common Unix Printing System REQUIRED 1.1 - INCOMPAT 'CUPS may not be installed or not running'
gs GhostScript - PostScript and PDF language interpreter and previewer REQUIRED 7.05 9.50 OK -
error: xsane xsane - Graphical scanner frontend for SANE OPTIONAL 0.9 - MISSING 'xsane needs to be installed'
scanimage scanimage - Shell scanning program OPTIONAL 1.0 1.0.29 OK -
error: dbus DBus - Message bus system REQUIRED - 1.12.16 MISSING 'DBUS may not be installed or not running'
policykit PolicyKit - Administrative policy framework OPTIONAL - 0.105 OK -
network network -wget OPTIONAL - 1.20.3 OK -
avahi-utils avahi-utils OPTIONAL - 0.7 OK -
------------------------
| General Dependencies |
------------------------
error: libjpeg libjpeg - JPEG library REQUIRED - - MISSING 'libjpeg needs to be installed'
error: cups-devel CUPS devel- Common Unix Printing System development files REQUIRED - - MISSING 'cups-devel needs to be installed'
error: cups-image CUPS image - CUPS image development files REQUIRED - - MISSING 'cups-image needs to be installed'
libpthread libpthread - POSIX threads library REQUIRED - b'2.31' OK -
error: libusb libusb - USB library REQUIRED - 1.0 MISSING 'libusb needs to be installed'
sane SANE - Scanning library REQUIRED - - OK -
error: sane-devel SANE - Scanning library development files REQUIRED - - MISSING 'sane-devel needs to be installed'
error: libnetsnmp-devel libnetsnmp-devel - SNMP networking library development files REQUIRED 5.0.9 - MISSING 'libnetsnmp-devel needs to be installed'
error: libcrypto libcrypto - OpenSSL cryptographic library REQUIRED - 1.1.1 MISSING 'libcrypto needs to be installed'
python3X Python 2.2 or greater - Python programming language REQUIRED 2.2 3.8.2 OK -
python3-notify2 Python libnotify - Python bindings for the libnotify Desktop notifications OPTIONAL - - OK -
error: python3-pyqt4-dbus PyQt 4 DBus - DBus Support for PyQt4 OPTIONAL 4.0 - MISSING 'python3-pyqt4-dbus needs to be installed'
error: python3-pyqt4 PyQt 4- Qt interface for Python (for Qt version 4.x) REQUIRED 4.0 - MISSING 'python3-pyqt4 needs to be installed'
python3-dbus Python DBus - Python bindings for DBus REQUIRED 0.80.0 1.2.16 OK -
python3-xml Python XML libraries REQUIRED - 2.2.9 OK -
error: python3-devel Python devel - Python development files REQUIRED 2.2 3.8.2 MISSING 'python3-devel needs to be installed'
python3-pil PIL - Python Imaging Library (required for commandline scanning with hp-scan) OPTIONAL - 7.0.0 OK -
python3-reportlab Reportlab - PDF library for Python OPTIONAL 2.0 3.5.34 OK -
--------------
| COMPILEDEP |
--------------
error: libtool libtool - Library building support services REQUIRED - - MISSING 'libtool needs to be installed'
gcc gcc - GNU Project C and C++ Compiler REQUIRED - 9.3.0 OK -
make make - GNU make utility to maintain groups of programs REQUIRED 3.0 4.2.1 OK -
---------------------
| Python Extentions |
---------------------
cupsext CUPS-Extension REQUIRED - 3.20.3 OK -
hpmudext IO-Extension REQUIRED - 3.20.3 OK -
----------------------
| Scan Configuration |
----------------------
'/etc/sane.d/dll.d/hpaio' not found.
hpaio HPLIP-SANE-Backend REQUIRED - 3.20.3 OK 'hpaio found in /etc/sane.d/dll.conf'
scanext Scan-SANE-Extension REQUIRED - 3.20.3 OK -
------------------------------
| DISCOVERED SCANNER DEVICES |
------------------------------
Created directory: /var/lib/snmp/mib_indexes
Created directory: /var/lib/snmp/mib_indexes
Created directory: /var/lib/snmp/mib_indexes
Created directory: /var/lib/snmp/mib_indexes
Created directory: /var/lib/snmp/mib_indexes
Created directory: /var/lib/snmp/mib_indexes
Created directory: /var/lib/snmp/mib_indexes
Created directory: /var/lib/snmp/mib_indexes
Created directory: /var/lib/snmp/mib_indexes
Created directory: /var/lib/snmp/mib_indexes
device `escl:https://192.168.1.131:443' is a ESCL HP ENVY 4520 series [7C5C88] SSL flatbed scanner
device `escl:http://192.168.1.131:8080' is a ESCL HP ENVY 4520 series [7C5C88] flatbed scanner
device `escl:http://127.0.0.1:60000' is a ESCL ENVY 4520 series [TH8735H1DF0660] flatbed scanner
device `hpaio:/usb/ENVY_4520_series?serial=TH8735H1DF0660' is a Hewlett-Packard ENVY_4520_series all-in-one
--------------------------
| DISCOVERED USB DEVICES |
--------------------------
Device URI Model
---------------------------------------------- -----------------------------------------
hp:/usb/ENVY_4520_series?serial=TH8735H1DF0660 HP ENVY 4520 series
---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------
ENVY-4520
---------
Type: Printer
Device URI: hp:/usb/ENVY_4520_series?serial=TH8735H1DF0660
PPD: /etc/cups/ppd/ENVY-4520.ppd
PPD Description: HP Envy 4520 Series, hpcups 3.20.3
Printer status: la stampante ENVY-4520 è inattiva. è stata abilitata da dom 10 mag 2020, 18:19:42
error: Unable to communicate with device (code=12): hp:/usb/ENVY_4520_series?serial=TH8735H1DF0660
error: Device not found
error: Communication status: Failed
--------------
| PERMISSION |
--------------
USB ENVY-4520 Required - - OK Node:'/dev/bus/usb/001/008' Perm:' root lp rw- rw- rw- rw- r--'
-----------
| SUMMARY |
-----------
Missing Required Dependencies
-----------------------------
error: 'libcups2' package is missing/incompatible
error: 'libdbus-1-dev' package is missing/incompatible
error: 'libjpeg-dev' package is missing/incompatible
error: 'libcups2-dev' package is missing/incompatible
error: 'cups-bsd' package is missing/incompatible
error: 'cups-client' package is missing/incompatible
error: 'libcupsimage2-dev' package is missing/incompatible
error: 'libusb-1.0.0-dev' package is missing/incompatible
error: 'libusb-0.1-4' package is missing/incompatible
error: 'libsane-dev' package is missing/incompatible
error: 'libsnmp-dev' package is missing/incompatible
error: 'snmp-mibs-downloader' package is missing/incompatible
error: 'openssl' package is missing/incompatible
error: 'python3-pyqt4' package is missing/incompatible
error: 'gtk2-engines-pixbuf' package is missing/incompatible
error: 'python3-dev' package is missing/incompatible
error: 'libtool' package is missing/incompatible
error: 'libtool-bin' package is missing/incompatible
Missing Optional Dependencies
-----------------------------
error: 'gtk2-engines-pixbuf' package is missing/incompatible
error: 'xsane' package is missing/incompatible
error: 'python3-dbus.mainloop.qt' package is missing/incompatible
Total Errors: 15
Total Warnings: 1
Done.
Mai mangiare la neve gialla!!!
- il 21esimo
- Prode Principiante
- Messaggi: 188
- Iscrizione: domenica 14 novembre 2010, 16:19
- Località: Provincia di Foggia
Re: Stampante/scanner HP non funziona
In effetti per la disperazione verrebbe voglia di migrare a Windows...
Comunque stessa stampante, con Fedora 32 nessun problema.
Comunque stessa stampante, con Fedora 32 nessun problema.
- il 21esimo
- Prode Principiante
- Messaggi: 188
- Iscrizione: domenica 14 novembre 2010, 16:19
- Località: Provincia di Foggia
Re: Stampante/scanner HP non funziona
Rettifico: con Fedora funziona lo scanner ma non la stampante. Ho risolto... tornando a Windows...il 21esimo ha scritto: ↑martedì 12 maggio 2020, 0:23In effetti per la disperazione verrebbe voglia di migrare a Windows...
Comunque stessa stampante, con Fedora 32 nessun problema.
- Sevin
- Scoppiettante Seguace
- Messaggi: 413
- Iscrizione: martedì 21 ottobre 2008, 12:05
- Desktop: ubuntu
- Distribuzione: Mint 20.1
- Sesso: Maschile
Re: Stampante/scanner HP non funziona
il 21esimo ha scritto: ↑martedì 12 maggio 2020, 12:09Rettifico: con Fedora funziona lo scanner ma non la stampante. Ho risolto... tornando a Windows...il 21esimo ha scritto: ↑martedì 12 maggio 2020, 0:23In effetti per la disperazione verrebbe voglia di migrare a Windows...
Comunque stessa stampante, con Fedora 32 nessun problema.
tornare a windows per poter stampare un foglio non è bello!!!
Mai mangiare la neve gialla!!!
-
- Rampante Reduce
- Messaggi: 6618
- Iscrizione: mercoledì 20 maggio 2009, 22:48
- Distribuzione: 18.4 mate - 22.4 mate
- Sesso: Maschile
- Località: Versilia
Re: Stampante/scanner HP non funziona
Leggete attentamente quello che vi risponde il SO quando ci sono dei problemi:
warning: HPLIP-Installation: Auto installation is not supported for ubuntu distro 20.04 version
- Sevin
- Scoppiettante Seguace
- Messaggi: 413
- Iscrizione: martedì 21 ottobre 2008, 12:05
- Desktop: ubuntu
- Distribuzione: Mint 20.1
- Sesso: Maschile
Re: Stampante/scanner HP non funziona
ho letto e l'ho installato manualmente, ma i problemi non si sono risolti.Roberto Pontecorvi ha scritto: ↑mercoledì 13 maggio 2020, 16:22Leggete attentamente quello che vi risponde il SO quando ci sono dei problemi:warning: HPLIP-Installation: Auto installation is not supported for ubuntu distro 20.04 version
E sono problemi che abbiamo in tanti...
Mai mangiare la neve gialla!!!
-
- Rampante Reduce
- Messaggi: 6618
- Iscrizione: mercoledì 20 maggio 2009, 22:48
- Distribuzione: 18.4 mate - 22.4 mate
- Sesso: Maschile
- Località: Versilia
Re: Stampante/scanner HP non funziona
L'ho detto in qualche post in questo forum, hp ancora non ha rilasciato i drive per la 20.4. Io ho risolto lasciando la 3.20.3 e installando i soli plugin. Aspetterò i drive hp appena disponibili. Un'altro suggerimento che normalmente dò è quello di lasciare la vecchia distribuzione, funzionante, finchè la nuova non ha risolto i problemi che ci affliggono, se ci affliggono. Per lo scanner prova con -> simple-scan
Ultima modifica di Roberto Pontecorvi il mercoledì 20 maggio 2020, 21:32, modificato 1 volta in totale.
-
- Prode Principiante
- Messaggi: 4
- Iscrizione: martedì 12 maggio 2020, 19:41
Re: Stampante/scanner HP non funziona
Buongiorno,
mi associo alla tematica con una stampante multifunzione HP Photosmart b109a-m che stampa correttamente ma non scansiona.
hp-setup peraltro non riconosce alcun device sulla porta USB.
Installato hplip gui, modificato il file models.dat che conteneva il nome della stampante scritto non correttamente ma senza esito positivo
Il tutto con Ubuntu 20.04 LTS e hplip 3.20.5
Qualcuno ha qualche spunto per risolvere?
Grazie
Francesco
mi associo alla tematica con una stampante multifunzione HP Photosmart b109a-m che stampa correttamente ma non scansiona.
hp-setup peraltro non riconosce alcun device sulla porta USB.
Installato hplip gui, modificato il file models.dat che conteneva il nome della stampante scritto non correttamente ma senza esito positivo
Il tutto con Ubuntu 20.04 LTS e hplip 3.20.5
Qualcuno ha qualche spunto per risolvere?
Grazie
Francesco
-
- Rampante Reduce
- Messaggi: 6618
- Iscrizione: mercoledì 20 maggio 2009, 22:48
- Distribuzione: 18.4 mate - 22.4 mate
- Sesso: Maschile
- Località: Versilia
Re: Stampante/scanner HP non funziona
Questa mattina negli agionamenti del SO è uscito il nuovo kernell che va d'accordo con i drive 3.20.5
- tom tom
- Entusiasta Emergente
- Messaggi: 1373
- Iscrizione: giovedì 6 novembre 2008, 8:53
- Desktop: gnome shell
- Distribuzione: ubuntu 22.04
- Località: torino
Re: Stampante/scanner HP non funziona
vero, ma ho provato a reinstallare la stampante e i risultati sono uguali a prima
EDIT: ho provato a rilanciare, ma continua a dirmi che è installato il 3.20.3 e non so come installare il 3.20.5... accetto dritte
EDIT: ho provato a rilanciare
Codice: Seleziona tutto
hp-plugin
Ultima modifica di tom tom il mercoledì 20 maggio 2020, 21:34, modificato 1 volta in totale.
Quando la NASA iniziò i lanci spaziali,si accorsero che le penne non scrivevano senza gravità. Impiegarono 10 anni e 12 milioni di dollari per una penna che potesse scrivere con gravità 0 ...I russi usavano una matita...
Chi c’è in linea
Visualizzano questa sezione: 0 utenti iscritti e 13 ospiti