[Audio] Minidisc Sony - Impossibile montare il volume.

[Nexsus58]

Ciao a tutti. Sto usando Gutsy fin dalle prime uscite e devo dire che mi son sempre trovato benissimo (a parte piccoli problemi ma comprensibili visto che non è ancora definitiva).
Con la 7.04 riuscivo a usare il mio Minidisc SONY MZ-NH700 come supporto esterno (in pratica come una semplice chiavetta USB). Sonic Stage con wine non funzionava, l'installazione si fermava e i file audio erano inutilizzabili sul pc.
Ora, con la versione 7.10 di Ubuntu Gutsy e gli aggiornamenti di wine Sonic Stage funziona ma..............
gutsy pur riconoscendomi il lettore minidisc non me lo fa montare.
Appare la seguente scritta: IMPOSSIBILE MONTARE IL SUPPORTO. Probabilmente non è inserito alcun disco.

Dal comando lsusb sembra che il sistema lo riconosca.

francy@francy-laptop:~$ lsusb
Bus 003 Device 001: ID 0000:0000 
Bus 002 Device 006: ID 054c:0185 Sony Corp.
Bus 002 Device 003: ID 04b3:3107 IBM Corp. ThinkPad 800dpi Optical Travel Mouse
Bus 002 Device 001: ID 0000:0000 
Bus 001 Device 001: ID 0000:0000

Come posso fare?

[andreapapotti]

posta le differenze di un dmeg prima e dopo l'inserimento

#dmesg

[Nexsus58]

Ciao scusa se ho tardato a rispondere ma non ho avuto molto tempo per occuparmi della faccenda.
Dunque ti posto gli esiti di dmesg prima e dopo l'attacco del minidisc.

prima dell'attacco del minidisc

Codice: Seleziona tutto

francy@francy-laptop:~$ dmesg
[    0.000000] Linux version 2.6.22-14-generic (buildd@palmer) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14 23:05:12 GMT 2007 (Ubuntu 2.6.22-14.46-generic)
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[    0.000000]  BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
[    0.000000]  BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000001ff70000 (usable)
[    0.000000]  BIOS-e820: 000000001ff70000 - 000000001ff7e000 (ACPI data)
[    0.000000]  BIOS-e820: 000000001ff7e000 - 000000001ff80000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000001ff80000 - 0000000020000000 (reserved)
[    0.000000]  BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
[    0.000000] 0MB HIGHMEM available.
[    0.000000] 511MB LOWMEM available.
[    0.000000] Entering add_active_range(0, 0, 130928) 0 entries of 256 used
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   Normal       4096 ->   130928
[    0.000000]   HighMem    130928 ->   130928
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0:        0 ->   130928
[    0.000000] On node 0 totalpages: 130928
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 4064 pages, LIFO batch:0
[    0.000000]   Normal zone: 990 pages used for memmap
[    0.000000]   Normal zone: 125842 pages, LIFO batch:31
[    0.000000]   HighMem zone: 0 pages used for memmap
[    0.000000] DMI present.
[    0.000000] ACPI: RSDP signature @ 0xC00F7010 checksum 0
[    0.000000] ACPI: RSDP 000F7010, 0024 (r2 IBM   )
[    0.000000] ACPI: XSDT 1FF731CD, 004C (r1 IBM    TP-1I        2100  LTP        0)
[    0.000000] ACPI: FACP 1FF73300, 0081 (r1 IBM    TP-1I        2100 IBM         1)
[    0.000000] ACPI: DSDT 1FF733E7, AAD5 (r1 IBM    TP-1I        2100 MSFT  100000D)
[    0.000000] ACPI: FACS 1FF7F000, 0040
[    0.000000] ACPI: SSDT 1FF733B4, 0033 (r1 IBM    TP-1I        2100 MSFT  100000D)
[    0.000000] ACPI: ECDT 1FF7DEBC, 0052 (r1 IBM    TP-1I        2100 IBM         1)
[    0.000000] ACPI: TCPA 1FF7DF0E, 0032 (r1 IBM    TP-1I        2100 PTL         1)
[    0.000000] ACPI: BOOT 1FF7DFD8, 0028 (r1 IBM    TP-1I        2100  LTP        1)
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:df800000)
[    0.000000] Built 1 zonelists.  Total pages: 129906
[    0.000000] Kernel command line: root=UUID=ba541ba2-03de-496d-9f8c-6809e75cfd92 ro quiet splash locale=it_IT vga=792
[    0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[    0.000000] mapped APIC to ffffd000 (0140c000)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[    0.000000] Detected 1598.691 MHz processor.
[    5.781953] Console: colour dummy device 80x25
[    5.782375] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    5.782771] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    5.797530] Memory: 505612k/523712k available (2015k kernel code, 17564k reserved, 916k data, 364k init, 0k highmem)
[    5.797546] virtual kernel memory layout:
[    5.797547]     fixmap  : 0xfff4d000 - 0xfffff000   ( 712 kB)
[    5.797549]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    5.797551]     vmalloc : 0xe0800000 - 0xff7fe000   ( 495 MB)
[    5.797553]     lowmem  : 0xc0000000 - 0xdff70000   ( 511 MB)
[    5.797555]       .init : 0xc03e3000 - 0xc043e000   ( 364 kB)
[    5.797557]       .data : 0xc02f7d26 - 0xc03dce84   ( 916 kB)
[    5.797558]       .text : 0xc0100000 - 0xc02f7d26   (2015 kB)
[    5.797563] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[    5.797622] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[    5.877586] Calibrating delay using timer specific routine.. 3201.01 BogoMIPS (lpj=6402038)
[    5.877624] Security Framework v1.0.0 initialized
[    5.877637] SELinux:  Disabled at boot.
[    5.877659] Mount-cache hash table entries: 512
[    5.877874] CPU: After generic identify, caps: bfebf9ff 00000000 00000000 00000000 00004400 00000000 00000000
[    5.877894] CPU: Trace cache: 12K uops, L1 D cache: 8K
[    5.877899] CPU: L2 cache: 512K
[    5.877903] CPU: Hyper-Threading is disabled
[    5.877906] CPU: After all inits, caps: bfebf9ff 00000000 00000000 0000b080 00004400 00000000 00000000
[    5.877926] Compat vDSO mapped to ffffe000.
[    5.877947] Checking 'hlt' instruction... OK.
[    5.893749] SMP alternatives: switching to UP code
[    5.894010] Freeing SMP alternatives: 11k freed
[    5.894457] Early unpacking initramfs... done
[    6.486161] ACPI: Core revision 20070126
[    6.486290] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[    6.492572] ACPI: setting ELCR to 0200 (from 0800)
[    6.501583] CPU0: Intel Mobile Intel(R) Pentium(R) 4 - M CPU 1.60GHz stepping 07
[    6.501594] SMP motherboard not detected.
[    6.501597] Local APIC not detected. Using dummy APIC emulation.
[    6.501657] Brought up 1 CPUs
[    6.501851] Booting paravirtualized kernel on bare hardware
[    6.501931] Time: 11:25:43  Date: 09/15/107
[    6.501968] NET: Registered protocol family 16
[    6.502111] EISA bus registered
[    6.502129] ACPI: bus type pci registered
[    6.502225] PCI: PCI BIOS revision 2.10 entry at 0xfd8fe, last bus=8
[    6.502228] PCI: Using configuration type 1
[    6.502231] Setting up standard PCI resources
[    6.507636] ACPI: EC: Found ECDT
[    6.518038] ACPI: Interpreter enabled
[    6.518045] ACPI: (supports S0 S3 S4 S5)
[    6.518079] ACPI: Using PIC for interrupt routing
[    6.529206] ACPI: EC: GPE=0x1c, ports=0x66, 0x62
[    6.529298] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    6.529309] PCI: Probing PCI hardware (bus 00)
[    6.529817] PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
[    6.529823] PCI quirk: region 1180-11bf claimed by ICH4 GPIO
[    6.530438] PCI: Firmware left 0000:02:08.0 e100 interrupts enabled, disabling
[    6.530539] PCI: Transparent bridge - 0000:00:1e.0
[    6.530743] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    6.530824] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[    6.530860] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[    6.535411] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
[    6.535698] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
[    6.535980] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
[    6.536262] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
[    6.536543] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
[    6.536802] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[    6.537122] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[    6.537384] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[    6.537898] ACPI: Power Resource [PUBS] (on)
[    6.537924] Linux Plug and Play Support v0.97 (c) Adam Belay
[    6.537945] pnp: PnP ACPI init
[    6.537968] ACPI: bus type pnp registered
[    6.543276] pnp: PnP ACPI: found 13 devices
[    6.543282] ACPI: ACPI bus type pnp unregistered
[    6.543288] PnPBIOS: Disabled by ACPI PNP
[    6.543382] PCI: Using ACPI for IRQ routing
[    6.543387] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[    6.557619] NET: Registered protocol family 8
[    6.557623] NET: Registered protocol family 20
[    6.557739] pnp: 00:00: iomem range 0x0-0x9ffff could not be reserved
[    6.557744] pnp: 00:00: iomem range 0xc0000-0xc3fff could not be reserved
[    6.557749] pnp: 00:00: iomem range 0xc4000-0xc7fff could not be reserved
[    6.557754] pnp: 00:00: iomem range 0xc8000-0xcbfff could not be reserved
[    6.561044] Time: tsc clocksource has been installed.
[    6.588309] PCI: Bridge: 0000:00:01.0
[    6.588314]   IO window: 3000-3fff
[    6.588321]   MEM window: d0100000-d01fffff
[    6.588327]   PREFETCH window: e8000000-efffffff
[    6.588339] PCI: Bus 3, cardbus bridge: 0000:02:00.0
[    6.588343]   IO window: 00004000-000040ff
[    6.588349]   IO window: 00004400-000044ff
[    6.588355]   PREFETCH window: f0000000-f3ffffff
[    6.588362]   MEM window: d4000000-d7ffffff
[    6.588368] PCI: Bus 7, cardbus bridge: 0000:02:00.1
[    6.588372]   IO window: 00004800-000048ff
[    6.588378]   IO window: 00004c00-00004cff
[    6.588384]   PREFETCH window: f4000000-f7ffffff
[    6.588390]   MEM window: d8000000-dbffffff
[    6.588397] PCI: Bridge: 0000:00:1e.0
[    6.588401]   IO window: 4000-8fff
[    6.588409]   MEM window: d0200000-dfffffff
[    6.588416]   PREFETCH window: f0000000-f7ffffff
[    6.588440] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[    6.588986] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[    6.588992] PCI: setting IRQ 11 as level-triggered
[    6.588997] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[    6.589497] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[    6.589501] ACPI: PCI Interrupt 0000:02:00.1[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
[    6.589527] NET: Registered protocol family 2
[    6.629065] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[    6.629132] TCP established hash table entries: 16384 (order: 5, 196608 bytes)
[    6.629294] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[    6.629402] TCP: Hash tables configured (established 16384 bind 16384)
[    6.629406] TCP reno registered
[    6.641212] checking if image is initramfs...<6>Switched to high resolution mode on CPU 0
[    7.204421]  it is
[    7.812304] Freeing initrd memory: 9188k freed
[    7.812502] Simple Boot Flag at 0x35 set to 0x1
[    7.812808] audit: initializing netlink socket (disabled)
[    7.812831] audit(1192447543.760:1): initialized
[    7.816413] VFS: Disk quotas dquot_6.5.1
[    7.816504] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    7.816658] io scheduler noop registered
[    7.816663] io scheduler anticipatory registered
[    7.816666] io scheduler deadline registered
[    7.816693] io scheduler cfq registered (default)
[    7.816773] Boot video device is 0000:01:00.0
[    7.817035] isapnp: Scanning for PnP cards...
[    8.170586] isapnp: No Plug & Play device found
[    8.213504] Real Time Clock Driver v1.12ac
[    8.213663] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing 

e questo è l'esito dopo aver attaccato il minidisc

francy@francy-laptop:~$ dmesg
[    0.000000] Linux version 2.6.22-14-generic (buildd@palmer) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14 23:05:12 GMT 2007 (Ubuntu 2.6.22-14.46-generic)
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[    0.000000]  BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
[    0.000000]  BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000001ff70000 (usable)
[    0.000000]  BIOS-e820: 000000001ff70000 - 000000001ff7e000 (ACPI data)
[    0.000000]  BIOS-e820: 000000001ff7e000 - 000000001ff80000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000001ff80000 - 0000000020000000 (reserved)
[    0.000000]  BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
[    0.000000] 0MB HIGHMEM available.
[    0.000000] 511MB LOWMEM available.
[    0.000000] Entering add_active_range(0, 0, 130928) 0 entries of 256 used
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   Normal       4096 ->   130928
[    0.000000]   HighMem    130928 ->   130928
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0:        0 ->   130928
[    0.000000] On node 0 totalpages: 130928
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 4064 pages, LIFO batch:0
[    0.000000]   Normal zone: 990 pages used for memmap
[    0.000000]   Normal zone: 125842 pages, LIFO batch:31
[    0.000000]   HighMem zone: 0 pages used for memmap
[    0.000000] DMI present.
[    0.000000] ACPI: RSDP signature @ 0xC00F7010 checksum 0
[    0.000000] ACPI: RSDP 000F7010, 0024 (r2 IBM   )
[    0.000000] ACPI: XSDT 1FF731CD, 004C (r1 IBM    TP-1I        2100  LTP        0)
[    0.000000] ACPI: FACP 1FF73300, 0081 (r1 IBM    TP-1I        2100 IBM         1)
[    0.000000] ACPI: DSDT 1FF733E7, AAD5 (r1 IBM    TP-1I        2100 MSFT  100000D)
[    0.000000] ACPI: FACS 1FF7F000, 0040
[    0.000000] ACPI: SSDT 1FF733B4, 0033 (r1 IBM    TP-1I        2100 MSFT  100000D)
[    0.000000] ACPI: ECDT 1FF7DEBC, 0052 (r1 IBM    TP-1I        2100 IBM         1)
[    0.000000] ACPI: TCPA 1FF7DF0E, 0032 (r1 IBM    TP-1I        2100 PTL         1)
[    0.000000] ACPI: BOOT 1FF7DFD8, 0028 (r1 IBM    TP-1I        2100  LTP        1)
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:df800000)
[    0.000000] Built 1 zonelists.  Total pages: 129906
[    0.000000] Kernel command line: root=UUID=ba541ba2-03de-496d-9f8c-6809e75cfd92 ro quiet splash locale=it_IT vga=792
[    0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[    0.000000] mapped APIC to ffffd000 (0140c000)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[    0.000000] Detected 1598.691 MHz processor.
[    5.781953] Console: colour dummy device 80x25
[    5.782375] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    5.782771] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    5.797530] Memory: 505612k/523712k available (2015k kernel code, 17564k reserved, 916k data, 364k init, 0k highmem)
[    5.797546] virtual kernel memory layout:
[    5.797547]     fixmap  : 0xfff4d000 - 0xfffff000   ( 712 kB)
[    5.797549]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    5.797551]     vmalloc : 0xe0800000 - 0xff7fe000   ( 495 MB)
[    5.797553]     lowmem  : 0xc0000000 - 0xdff70000   ( 511 MB)
[    5.797555]       .init : 0xc03e3000 - 0xc043e000   ( 364 kB)
[    5.797557]       .data : 0xc02f7d26 - 0xc03dce84   ( 916 kB)
[    5.797558]       .text : 0xc0100000 - 0xc02f7d26   (2015 kB)
[    5.797563] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[    5.797622] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[    5.877586] Calibrating delay using timer specific routine.. 3201.01 BogoMIPS (lpj=6402038)
[    5.877624] Security Framework v1.0.0 initialized
[    5.877637] SELinux:  Disabled at boot.
[    5.877659] Mount-cache hash table entries: 512
[    5.877874] CPU: After generic identify, caps: bfebf9ff 00000000 00000000 00000000 00004400 00000000 00000000
[    5.877894] CPU: Trace cache: 12K uops, L1 D cache: 8K
[    5.877899] CPU: L2 cache: 512K
[    5.877903] CPU: Hyper-Threading is disabled
[    5.877906] CPU: After all inits, caps: bfebf9ff 00000000 00000000 0000b080 00004400 00000000 00000000
[    5.877926] Compat vDSO mapped to ffffe000.
[    5.877947] Checking 'hlt' instruction... OK.
[    5.893749] SMP alternatives: switching to UP code
[    5.894010] Freeing SMP alternatives: 11k freed
[    5.894457] Early unpacking initramfs... done
[    6.486161] ACPI: Core revision 20070126
[    6.486290] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[    6.492572] ACPI: setting ELCR to 0200 (from 0800)
[    6.501583] CPU0: Intel Mobile Intel(R) Pentium(R) 4 - M CPU 1.60GHz stepping 07
[    6.501594] SMP motherboard not detected.
[    6.501597] Local APIC not detected. Using dummy APIC emulation.
[    6.501657] Brought up 1 CPUs
[    6.501851] Booting paravirtualized kernel on bare hardware
[    6.501931] Time: 11:25:43  Date: 09/15/107
[    6.501968] NET: Registered protocol family 16
[    6.502111] EISA bus registered
[    6.502129] ACPI: bus type pci registered
[    6.502225] PCI: PCI BIOS revision 2.10 entry at 0xfd8fe, last bus=8
[    6.502228] PCI: Using configuration type 1
[    6.502231] Setting up standard PCI resources
[    6.507636] ACPI: EC: Found ECDT
[    6.518038] ACPI: Interpreter enabled
[    6.518045] ACPI: (supports S0 S3 S4 S5)
[    6.518079] ACPI: Using PIC for interrupt routing
[    6.529206] ACPI: EC: GPE=0x1c, ports=0x66, 0x62
[    6.529298] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    6.529309] PCI: Probing PCI hardware (bus 00)
[    6.529817] PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
[    6.529823] PCI quirk: region 1180-11bf claimed by ICH4 GPIO
[    6.530438] PCI: Firmware left 0000:02:08.0 e100 interrupts enabled, disabling
[    6.530539] PCI: Transparent bridge - 0000:00:1e.0
[    6.530743] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    6.530824] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[    6.530860] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[    6.535411] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
[    6.535698] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
[    6.535980] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
[    6.536262] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
[    6.536543] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
[    6.536802] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[    6.537122] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[    6.537384] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[    6.537898] ACPI: Power Resource [PUBS] (on)
[    6.537924] Linux Plug and Play Support v0.97 (c) Adam Belay
[    6.537945] pnp: PnP ACPI init
[    6.537968] ACPI: bus type pnp registered
[    6.543276] pnp: PnP ACPI: found 13 devices
[    6.543282] ACPI: ACPI bus type pnp unregistered
[    6.543288] PnPBIOS: Disabled by ACPI PNP
[    6.543382] PCI: Using ACPI for IRQ routing
[    6.543387] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[    6.557619] NET: Registered protocol family 8
[    6.557623] NET: Registered protocol family 20
[    6.557739] pnp: 00:00: iomem range 0x0-0x9ffff could not be reserved
[    6.557744] pnp: 00:00: iomem range 0xc0000-0xc3fff could not be reserved
[    6.557749] pnp: 00:00: iomem range 0xc4000-0xc7fff could not be reserved
[    6.557754] pnp: 00:00: iomem range 0xc8000-0xcbfff could not be reserved
[    6.561044] Time: tsc clocksource has been installed.
[    6.588309] PCI: Bridge: 0000:00:01.0
[    6.588314]   IO window: 3000-3fff
[    6.588321]   MEM window: d0100000-d01fffff
[    6.588327]   PREFETCH window: e8000000-efffffff
[    6.588339] PCI: Bus 3, cardbus bridge: 0000:02:00.0
[    6.588343]   IO window: 00004000-000040ff
[    6.588349]   IO window: 00004400-000044ff
[    6.588355]   PREFETCH window: f0000000-f3ffffff
[    6.588362]   MEM window: d4000000-d7ffffff
[    6.588368] PCI: Bus 7, cardbus bridge: 0000:02:00.1
[    6.588372]   IO window: 00004800-000048ff
[    6.588378]   IO window: 00004c00-00004cff
[    6.588384]   PREFETCH window: f4000000-f7ffffff
[    6.588390]   MEM window: d8000000-dbffffff
[    6.588397] PCI: Bridge: 0000:00:1e.0
[    6.588401]   IO window: 4000-8fff
[    6.588409]   MEM window: d0200000-dfffffff
[    6.588416]   PREFETCH window: f0000000-f7ffffff
[    6.588440] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[    6.588986] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[    6.588992] PCI: setting IRQ 11 as level-triggered
[    6.588997] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[    6.589497] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[    6.589501] ACPI: PCI Interrupt 0000:02:00.1[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
[    6.589527] NET: Registered protocol family 2
[    6.629065] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[    6.629132] TCP established hash table entries: 16384 (order: 5, 196608 bytes)
[    6.629294] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[    6.629402] TCP: Hash tables configured (established 16384 bind 16384)
[    6.629406] TCP reno registered
[    6.641212] checking if image is initramfs...<6>Switched to high resolution mode on CPU 0
[    7.204421]  it is
[    7.812304] Freeing initrd memory: 9188k freed
[    7.812502] Simple Boot Flag at 0x35 set to 0x1
[    7.812808] audit: initializing netlink socket (disabled)
[    7.812831] audit(1192447543.760:1): initialized
[    7.816413] VFS: Disk quotas dquot_6.5.1
[    7.816504] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    7.816658] io scheduler noop registered
[    7.816663] io scheduler anticipatory registered
[    7.816666] io scheduler deadline registered
[    7.816693] io scheduler cfq registered (default)
[    7.816773] Boot video device is 0000:01:00.0
[    7.817035] isapnp: Scanning for PnP cards...
[    8.170586] isapnp: No Plug & Play device found
[    8.213504] Real Time Clock Driver v1.12ac
[    8.213663] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[    8.215278] pnp: Device 00:0a activated.
[    8.215540] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A
[    8.216014] ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
[    8.216029] ACPI: PCI interrupt for device 0000:00:1f.6 disabled
[    8.216980] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[    8.217340] input: Macintosh mouse button emulation as /class/input/input0
[    8.217487] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[    8.223416] serio: i8042 KBD port at 0x60,0x64 irq 1
[    8.223427] serio: i8042 AUX port at 0x60,0x64 irq 12
[    8.223763] mice: PS/2 mouse device common for all mice
[    8.223956] EISA: Probing bus 0 at eisa.0
[    8.223967] Cannot allocate resource for EISA slot 1
[    8.223971] Cannot allocate resource for EISA slot 2
[    8.223975] Cannot allocate resource for EISA slot 3
[    8.223978] Cannot allocate resource for EISA slot 4
[    8.223982] Cannot allocate resource for EISA slot 5
[    8.223985] Cannot allocate resource for EISA slot 6
[    8.223988] Cannot allocate resource for EISA slot 7
[    8.223992] Cannot allocate resource for EISA slot 8
[    8.223995] EISA: Detected 0 cards.
[    8.224154] TCP cubic registered
[    8.224172] NET: Registered protocol family 1
[    8.224209] Using IPI No-Shortcut mode
[    8.224472]   Magic number: 11:690:428
[    8.225246] Freeing unused kernel memory: 364k freed
[    8.259674] input: AT Translated Set 2 keyboard as /class/input/input1
[    9.613483] AppArmor: AppArmor initialized<5>audit(1192447545.760:2):  type=1505 info="AppArmor initialized" pid=1191
[    9.824266] fuse init (API version 7.8)
[    9.833880] Failure registering capabilities with primary security module.
[   10.441778] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[   10.441790] ACPI: Processor [CPU] (supports 8 throttling states)
[   10.743069] ACPI: Thermal Zone [THM0] (29 C)
[   11.796272] usbcore: registered new interface driver usbfs
[   11.796313] usbcore: registered new interface driver hub
[   11.796352] usbcore: registered new device driver usb
[   11.797854] USB Universal Host Controller Interface driver v3.0
[   11.797952] ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[   11.797970] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[   11.797976] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[   11.798194] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[   11.798229] uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001800
[   11.798415] usb usb1: configuration #1 chosen from 1 choice
[   11.798460] hub 1-0:1.0: USB hub found
[   11.798470] hub 1-0:1.0: 2 ports detected
[   11.886488] SCSI subsystem initialized
[   11.895457] libata version 2.21 loaded.
[   11.901169] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[   11.901178] ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
[   11.901195] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[   11.901202] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[   11.901242] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[   11.901275] uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001820
[   11.901443] usb usb2: configuration #1 chosen from 1 choice
[   11.901489] hub 2-0:1.0: USB hub found
[   11.901503] hub 2-0:1.0: 2 ports detected
[   11.988976] e100: Intel(R) PRO/100 Network Driver, 3.5.17-k4-NAPI
[   11.988983] e100: Copyright(c) 1999-2006 Intel Corporation
[   12.007152] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[   12.007160] ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
[   12.007180] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[   12.007186] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[   12.007229] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[   12.007262] uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001840
[   12.007426] usb usb3: configuration #1 chosen from 1 choice
[   12.007472] hub 3-0:1.0: USB hub found
[   12.007485] hub 3-0:1.0: 2 ports detected
[   12.113240] ata_piix 0000:00:1f.1: version 2.11
[   12.113264] PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
[   12.113278] ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
[   12.113350] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[   12.113471] scsi0 : ata_piix
[   12.113542] scsi1 : ata_piix
[   12.114191] ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00011860 irq 14
[   12.114198] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x00011868 irq 15
[   12.209264] Floppy drive(s): fd0 is 1.44M
[   12.244113] usb 2-1: new full speed USB device using uhci_hcd and address 2
[   12.257384] FDC 0 is a National Semiconductor PC87306
[   12.276537] ata1.00: ATA-6: FUJITSU MHT2040AT, 8423, max UDMA/100
[   12.276545] ata1.00: 78140160 sectors, multi 16: LBA 
[   12.292592] ata1.00: configured for UDMA/100
[    6.568000] Marking TSC unstable due to: possible TSC halt in C2.
[    6.584000] Time: acpi_pm clocksource has been installed.
[    6.600000] usb 2-1: configuration #1 chosen from 1 choice
[    6.604000] hub 2-1:1.0: USB hub found
[    6.608000] hub 2-1:1.0: 4 ports detected
[    6.816000] ata2.00: ATAPI: LG CD-ROM CRN-8245B, 1.16, max UDMA/33
[    6.956000] usb 2-2: new low speed USB device using uhci_hcd and address 3
[    6.988000] ata2.00: configured for UDMA/33
[    6.988000] scsi 0:0:0:0: Direct-Access     ATA      FUJITSU MHT2040A 8423 PQ: 0 ANSI: 5
[    6.988000] scsi 1:0:0:0: CD-ROM            LG       CD-ROM CRN-8245B 1.16 PQ: 0 ANSI: 5
[    6.988000] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
[    6.988000] ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [LNKE] -> GSI 11 (level, low) -> IRQ 11
[    7.016000] e100: eth0: e100_probe: addr 0xd0200000, irq 11, MAC addr 00:09:6B:7A:85:E1
[    7.044000] sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors (40008 MB)
[    7.044000] sd 0:0:0:0: [sda] Write Protect is off
[    7.044000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    7.044000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    7.044000] sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors (40008 MB)
[    7.044000] sd 0:0:0:0: [sda] Write Protect is off
[    7.044000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    7.044000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    7.044000]  sda:<6>usb 2-2: configuration #1 chosen from 1 choice
[    7.120000]  sda1 sda2 <<6>usbcore: registered new interface driver hiddev
[    7.144000]  sda5 >
[    7.144000] sd 0:0:0:0: [sda] Attached SCSI disk
[    7.148000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    7.148000] scsi 1:0:0:0: Attached scsi generic sg1 type 5
[    7.168000] input: HID 04b3:3107 as /class/input/input2
[    7.168000] input: USB HID v1.00 Mouse [HID 04b3:3107] on usb-0000:00:1d.1-2
[    7.168000] usbcore: registered new interface driver usbhid
[    7.168000] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[    7.172000] sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
[    7.172000] Uniform CD-ROM driver Revision: 3.20
[    7.172000] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    7.568000] Attempting manual resume
[    7.568000] swsusp: Resume From Partition 8:5
[    7.568000] PM: Checking swsusp image.
[    7.568000] PM: Resume from disk failed.
[    7.636000] kjournald starting.  Commit interval 5 seconds
[    7.636000] EXT3-fs: mounted filesystem with ordered data mode.
[   19.988000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   19.992000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   20.320000] Linux agpgart interface v0.102 (c) Dave Jones
[   20.352000] agpgart: Detected an Intel 845G Chipset.
[   20.356000] agpgart: AGP aperture is 64M @ 0xe0000000
[   20.496000] intel_rng: FWH not detected
[   20.564000] iTCO_vendor_support: vendor-support=0
[   20.568000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
[   20.568000] iTCO_wdt: Found a ICH3-M TCO device (Version=1, TCOBASE=0x1060)
[   20.568000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   20.728000] Yenta: CardBus bridge found at 0000:02:00.0 [1014:0512]
[   20.728000] Yenta: Using INTVAL to route CSC interrupts to PCI
[   20.728000] Yenta: Routing CardBus interrupts to PCI
[   20.728000] Yenta TI: socket 0000:02:00.0, mfunc 0x01d21022, devctl 0x64
[   20.960000] Yenta: ISA IRQ mask 0x04b8, PCI irq 11
[   20.960000] Socket status: 30000006
[   20.960000] pcmcia: parent PCI bridge I/O window: 0x4000 - 0x8fff
[   20.960000] cs: IO port probe 0x4000-0x8fff: clean.
[   20.960000] pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xdfffffff
[   20.960000] pcmcia: parent PCI bridge Memory window: 0xf0000000 - 0xf7ffffff
[   20.960000] Yenta: CardBus bridge found at 0000:02:00.1 [1014:0512]
[   20.960000] Yenta: Using INTVAL to route CSC interrupts to PCI
[   20.960000] Yenta: Routing CardBus interrupts to PCI
[   20.960000] Yenta TI: socket 0000:02:00.1, mfunc 0x01d21022, devctl 0x64
[   21.192000] Yenta: ISA IRQ mask 0x04b8, PCI irq 11
[   21.192000] Socket status: 30000006
[   21.192000] pcmcia: parent PCI bridge I/O window: 0x4000 - 0x8fff
[   21.192000] cs: IO port probe 0x4000-0x8fff: clean.
[   21.192000] pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xdfffffff
[   21.192000] pcmcia: parent PCI bridge Memory window: 0xf0000000 - 0xf7ffffff
[   22.408000] input: PC Speaker as /class/input/input3
[   22.668000] irda_init()
[   22.668000] NET: Registered protocol family 23
[   22.996000] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x2c6ab1, caps: 0x884793/0x0
[   22.996000] serio: Synaptics pass-through port at isa0060/serio1/input0
[   23.016000] cs: IO port probe 0x100-0x3af: clean.
[   23.016000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[   23.016000] cs: IO port probe 0x820-0x8ff: clean.
[   23.016000] cs: IO port probe 0xc00-0xcf7: clean.
[   23.016000] cs: IO port probe 0xa00-0xaff: clean.
[   23.032000] input: SynPS/2 Synaptics TouchPad as /class/input/input4
[   23.036000] parport_pc 00:0b: reported by Plug and Play ACPI
[   23.036000] parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE]
[   23.044000] cs: IO port probe 0x100-0x3af: clean.
[   23.048000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[   23.048000] cs: IO port probe 0x820-0x8ff: clean.
[   23.048000] cs: IO port probe 0xc00-0xcf7: clean.
[   23.048000] cs: IO port probe 0xa00-0xaff: clean.
[   23.132000] pnp: Device 00:0c activated.
[   23.132000] nsc_ircc_pnp_probe() : From PnP, found firbase 0x2F8 ; irq 3 ; dma 1.
[   23.132000] nsc-ircc, chip->init
[   23.132000] nsc-ircc, Found chip at base=0x02e
[   23.132000] nsc-ircc, driver loaded (Dag Brattli)
[   23.132000] IrDA: Registered device irda0
[   23.132000] nsc-ircc, Using dongle: IBM31T1100 or Temic TFDS6000/TFDS6500
[   23.292000] ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
[   23.292000] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[   23.712000] intel8x0_measure_ac97_clock: measured 54574 usecs
[   23.712000] intel8x0: clocking to 48000
[   24.444000] lp0: using parport0 (interrupt-driven).
[   24.560000] Adding 1510068k swap on /dev/sda5.  Priority:-1 extents:1 across:1510068k
[   25.200000] EXT3 FS on sda1, internal journal
[   27.808000] input: Power Button (FF) as /class/input/input5
[   27.812000] ACPI: Power Button (FF) [PWRF]
[   27.852000] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[   27.884000] input: Lid Switch as /class/input/input6
[   27.888000] ACPI: Lid Switch [liD]
[   27.940000] input: Sleep Button (CM) as /class/input/input7
[   27.940000] ACPI: Sleep Button (CM) [SLPB]
[   28.052000] input: TPPS/2 IBM TrackPoint as /class/input/input8
[   28.184000] ACPI: ACPI Dock Station Driver 
[   28.272000] ACPI: Battery Slot [BAT0] (battery present)
[   28.328000] ACPI: \_SB_.PCI0.IDE0.SCND.MSTR: found ejectable bay
[   28.328000] ACPI: \_SB_.PCI0.IDE0.SCND.MSTR: Adding notify handler
[   28.328000] ACPI: Error installing bay notify handler
[   28.328000] ACPI: Bay [\_SB_.PCI0.IDE0.SCND.MSTR] Added
[   28.360000] ACPI: AC Adapter [AC] (on-line)
[   28.440000] ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
[   30.696000] ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
[   30.696000] PCI: Setting latency timer of device 0000:00:1f.6 to 64
[   31.384000] e100: eth0: e100_watchdog: link up, 10Mbps, half-duplex
[   31.716000] ppdev: user-space parallel port driver
[   32.484000] audit(1192447574.873:3):  type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=4796 profile="/usr/sbin/cupsd"
[   32.636000] IBM machine detected. Enabling interrupts during APM calls.
[   32.636000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[   32.636000] apm: overridden by ACPI.
[   32.980000] thinkpad_acpi: ThinkPad ACPI Extras v0.14
[   32.980000] thinkpad_acpi: http://ibm-acpi.sf.net/
[   32.980000] thinkpad_acpi: ThinkPad EC firmware 1IHT15WW-1.02
[   32.988000] thinkpad_acpi: another device driver is already handling bay events
[   32.988000] thinkpad_acpi: disabling subdriver bay
[   33.112000] Non-volatile memory driver v1.2
[   33.200000] input: /usr/sbin/thinkpad-keys as /class/input/input9
[   33.652000] Failure registering capabilities with primary security module.
[   34.064000] Bluetooth: Core ver 2.11
[   34.064000] NET: Registered protocol family 31
[   34.064000] Bluetooth: HCI device and connection manager initialized
[   34.064000] Bluetooth: HCI socket layer initialized
[   34.124000] Bluetooth: L2CAP ver 2.8
[   34.124000] Bluetooth: L2CAP socket layer initialized
[   34.276000] Bluetooth: RFCOMM socket layer initialized
[   34.276000] Bluetooth: RFCOMM TTY layer initialized
[   34.276000] Bluetooth: RFCOMM ver 1.8
[   34.784000] Clocksource tsc unstable (delta = -113153569 ns)
[   37.116000] [drm] Initialized drm 1.1.0 20060810
[   37.224000] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[   37.232000] [drm] Initialized radeon 1.27.0 20060524 on minor 0
[   39.036000] NET: Registered protocol family 17
[   39.620000] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
[   39.620000] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
[   39.620000] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
[   40.928000] [drm] Setting GART location based on new memory map
[   40.928000] [drm] writeback test succeeded in 1 usecs
[   44.896000] NET: Registered protocol family 10
[   44.896000] lo: Disabled Privacy Extensions
[   55.724000] eth0: no IPv6 routers present
[  870.064000] usb 2-1: USB disconnect, address 2
[  881.392000] usb 2-1: new full speed USB device using uhci_hcd and address 4
[  881.552000] usb 2-1: configuration #1 chosen from 1 choice
[  881.756000] usbcore: registered new interface driver libusual
[  881.928000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[  881.928000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[  881.940000] Initializing USB Mass Storage driver...
[  881.944000] scsi2 : SCSI emulation for USB Mass Storage devices
[  881.948000] usb-storage: device found at 4
[  881.948000] usb-storage: waiting for device to settle before scanning
[  881.948000] usbcore: registered new interface driver usb-storage
[  881.948000] USB Mass Storage support registered.
[  886.948000] usb-storage: device scan complete
[  886.952000] scsi 2:0:0:0: Direct-Access     SONY     Hi-MD WALKMAN    1000 PQ: 0 ANSI: 0 CCS
[  886.980000] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[  886.980000] sd 2:0:0:0: Attached scsi generic sg2 type 0

da quello che vedo lo legge come disco SCSI..

[andreapapotti]

scrivi

sudo fdisk -l

con il cosino attaccato

forse ho capito...

[Nexsus58]

Avevo già provato con nessun risultato.
Ad ogni modo questo è l'esito di sudo fdisk -l

Disco /dev/sda: 40.0 GB, 40007761920 byte
255 heads, 63 sectors/track, 4864 cylinders
Units = cilindri of 16065 * 512 = 8225280 bytes
Disk identifier: 0x01b201b1

Dispositivo Boot      Start        End      Blocks  Id  System
/dev/sda1  *          1        4676    37559938+  83  Linux
/dev/sda2            4677        4864    1510110    5  Esteso
/dev/sda5            4677        4864    1510078+  82  Linux swap / Solaris
Nota: la dimensione del settore è 2048 (non 512)

Disco /dev/sdb: 305 MB, 305915904 byte
10 heads, 59 sectors/track, 253 cylinders
Units = cilindri of 590 * 2048 = 1208320 bytes
Disk identifier: 0x00000000

Il disco /dev/sdb non contiene una tabella delle partizioni valida

[Nexsus58]

Nessuna idea da nessuno?  >:(

Da come si presenta il problema, è come se il formato in cui è formattato il minidisc non venisse riconosciuto da Ubuntu 7.10. Mi domando come mai Feisty 7.04 invece lo vedeva ...

[andreapapotti]

mavimo.netsons.org/linux_dispositivi_mtp

prova questa guida

[Nexsus58]

Riciao a tutti.
Riprendo questo mio vecchio post sull'incompatibilità di Ubuntu con un minidisc sony.
Faccio il punto della situazione partendo dal fatto che non mi spiego come mai con la versione Festy 7.04 Ubuntu mi leggeva senza problemi il contenuto del minidisc e ora invece con la versione Gutsy 7.10, no (seppure lo riconosca ma non consente di accedere ai file).
Forse qualche programmatore dello staff può darmi qualche suggerimento.
Ho fatto non so quante ricerche in rete, ma non ho trovato nessuna soluzione: ho solo constatato che quasi tutti i progetti legati a questo tipo di apparecchiature (minidisc) sono stati abbandonati.

Spero che qualcuno mi sappia dare delle dritte, ho bisogno di usarlo per registrazioni live e non e rinunciare alla qualità che offre mi scoccia. E' l'unica cosa che rende imperfetta la mia workstation con Linux Ubuntu.

Ciao e grazie a tutti.