[RISOLTO] Problema di avvio: PCI: Cannot allocate resource + schermata nera

[haanto]

Ciao a tutti.
Ho installato da zero la 7.10 sul mio portatile HP pavilion dx4000 equipaggiato con una ATI Radeon Mobility X700.
L'installazione è andata bene, ma con mia grande sopresa al primo avvio, dopo il prompt di GRUB, mi sono beccato una serie di messaggi

PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.0
PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.0
PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.0

e dopo una bella schermata nera (anche se l'HD continuava a "macinare" lasciando intendere che il caricamento stava andando avanti) >:(
Dopo la doverosa serie di parolacce ho cercato in giro ed ho risolto più o meno come segue.
I probemi sono 2:
1. i messaggi PCI
2. schermata nera (dipendente da un qualche conflitto della scheda video con lo splash screen)

Problema 1
Per evitare il msg basta passare al kernel la direttiva "acpi=off"
Per fare questo, al menù di GRUB accertarsi che sia selezionata la riga "Ubuntu 7.10, Kernel 2.6.22" quindi premere "e" per entrare in modalità di editig della riga in questione.
Quindi selezionare con i tasti freccia la seconda riga (kernel /boot/vmlinuz/...) e premere ancora "e" per editarne i parametri.
Inserire la direttiva "acpi=off" e premere invio affinchè venga accettata la modifica. Successivamente premere "b" se volete avviare il SO.
*ATTENZIONE* se come me avete un problema di schermo nero non premete "b" adesso, ma passate alla sezione seguente per risolvere anche il problema prima di avviare.

Problema 2
Come sopra bisogna modificare le direttive da passare al kernel. L'idea che mi sono fatto è che lo splash screen vada in conflitto con la scheda video quindi si perde totalmente lo schermo.
Per evitare che lo splash screen venga avviato seguite la procedura descritta sopra (problema 1) e raggiungete la sezione in cui si scelgono i parametri da passare al kernel, quindi eliminare la parola "splash".
A questo punto premere INVIO per accettare le modifiche e successivamente premere "b" per avviare con i parametri appena modificati.
L'effetto sarà che non saranno più visualizzati il logo UBUNTU e la barra di progressione, ma tutti i messaggi della fase di boot. Alla fine di questa partirà il login grafico a cui siamo abituati.

Ricordatevi alla fine di rendere permanenti le modifiche che vi ho indicato modificando manualmente  il file /boot/grub/menu.lst

Mi rendo conto che questo non risolve del tutto i problemi e che si tratta più di un "work around"... sto cercando in giro sul web ulteriori delucidazioni.

Per la cronaca: una volta avviato gnome ho scoperto che il sever Xgl non era installato e l'ho dovuto installare a mano per poter utilizzare compiz ... ma questa è un'altra storia.

[haanto]

dopo aver postato questa "soluzione temporanea" ho scoperto sul forum che il problema è molto diffuso fra i possessori di ATI mobility Radeon.

[haanto]

Sempre sul forum ho trovato indicazioni in merito alla modifica del file /etc/usplash.
A qualcuno sembra abbia funzionato impostare la corretta risoluzione schemo all'interno del file di cui sopra.

A me non ha funzionato. Ho provato praticamente tutte le risoluzioni ed alla fine ho dovuto eliminare la direttiva "splash" dai parametri passati al kernel.

Spero abbiate migliore fortuna.

[haanto]

Ok, la modifica del file usplash funziona.
Dopo aver modificato il file come sopra bisogna lanciare il comando seguente affinchè abbia effetto

sudo update-initramfs -u

Naturalmente ricordatevi di aggiungere la direttiva "splash" fra i parametri del kernel se l'avete in precedenza eliminata (come ho fatto io).

A me adesso funziona tutto.

[urby72]

Ciao!! Anche a mè lo stesso problema!! UGUALE!!! Ho un acer 5514 con scheda video x700 ho installato i driver proprietari 8.40.4

potresti spiegarmi passo a passo cosa devo fare??Scusa se ti chiedo questo ma leggendo i post non mi è molto chiara la situazione..

Ti ringrazio!!! (b2b)

[xovietM]

http://ubuntuforums.org/showthread.php?t=315602

c'è addirittura chi consiglia di aggiornare il bios

io ricevo lo stesso errore da quando uso una scheda AGP.
Qualcuno sa dirmi come caricare nel kernel i moduli AGP

questo è dmsg:

[    0.000000] Kernel command line: root=UUID=be06d6ad-86d5-4aee-8851-fd442253ca11 ro quiet splash
[    0.000000] mapped APIC to ffffd000 (fee00000)
[    0.000000] mapped IOAPIC to ffffc000 (fec00000)
[    0.000000] mapped IOAPIC to ffffb000 (fecc0000)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[    0.000000] Detected 1792.437 MHz processor.
[  20.342777] Console: colour VGA+ 80x25
[  20.343177] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[  20.343521] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[  20.425688] Memory: 2067336k/2096832k available (2015k kernel code, 28136k reserved, 915k data, 364k init, 1179328k highmem)
[  20.425696] virtual kernel memory layout:
[  20.425697]    fixmap  : 0xfff4d000 - 0xfffff000  ( 712 kB)
[  20.425699]    pkmap  : 0xff800000 - 0xffc00000  (4096 kB)
[  20.425700]    vmalloc : 0xf8800000 - 0xff7fe000  ( 111 MB)
[  20.425701]    lowmem  : 0xc0000000 - 0xf8000000  ( 896 MB)
[  20.425702]      .init : 0xc03e3000 - 0xc043e000  ( 364 kB)
[  20.425703]      .data : 0xc02f7e86 - 0xc03dce84  ( 915 kB)
[  20.425704]      .text : 0xc0100000 - 0xc02f7e86  (2015 kB)
[  20.425707] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[  20.425755] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[  20.505737] Calibrating delay using timer specific routine.. 3586.90 BogoMIPS (lpj=7173809)
[  20.505770] Security Framework v1.0.0 initialized
[  20.505778] SELinux:  Disabled at boot.
[  20.505791] Mount-cache hash table entries: 512
[  20.505939] CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000e3fd 00000000 00000001
[  20.505947] monitor/mwait feature present.
[  20.505949] using mwait in idle threads.
[  20.505954] CPU: L1 I cache: 32K, L1 D cache: 32K
[  20.505956] CPU: L2 cache: 4096K
[  20.505958] CPU: Physical Processor ID: 0
[  20.505960] CPU: Processor Core ID: 0
[  20.505962] CPU: After all inits, caps: bfebfbff 20000000 00000000 00003940 0000e3fd 00000000 00000001
[  20.505973] Compat vDSO mapped to ffffe000.
[  20.505986] Checking 'hlt' instruction... OK.
[  20.521861] SMP alternatives: switching to UP code
[  20.522341] Early unpacking initramfs... done
[  20.824900] ACPI: Core revision 20070126
[  20.824944] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[  21.261703] CPU0: Intel(R) Core(TM)2 Duo CPU    E6550  @ 2.33GHz stepping 0b
[  21.261718] SMP alternatives: switching to SMP code
[  21.261794] Booting processor 1/1 eip 3000
[  21.272494] Initializing CPU#1
[  21.349225] Calibrating delay using timer specific routine.. 3584.57 BogoMIPS (lpj=7169157)
[  21.349231] CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000e3fd 00000000 00000001
[  21.349236] monitor/mwait feature present.
[  21.349239] CPU: L1 I cache: 32K, L1 D cache: 32K
[  21.349241] CPU: L2 cache: 4096K
[  21.349242] CPU: Physical Processor ID: 0
[  21.349244] CPU: Processor Core ID: 1
[  21.349245] CPU: After all inits, caps: bfebfbff 20000000 00000000 00003940 0000e3fd 00000000 00000001
[  21.350011] CPU1: Intel(R) Core(TM)2 Duo CPU    E6550  @ 2.33GHz stepping 0b
[  21.350034] Total of 2 processors activated (7171.48 BogoMIPS).
[  21.350374] ENABLING IO-APIC IRQs
[  21.350558] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[  21.497231] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[  21.517234] Brought up 2 CPUs
[  21.712558] migration_cost=35
[  21.712678] Booting paravirtualized kernel on bare hardware
[  21.712773] Time: 17:07:11  Date: 02/03/108
[  21.712790] NET: Registered protocol family 16
[  21.712862] EISA bus registered
[  21.712866] ACPI: bus type pci registered
[  21.713040] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=128
[  21.713041] PCI: Using configuration type 1
[  21.713043] Setting up standard PCI resources
[  21.720375] ACPI: EC: Look up EC in DSDT
[  21.725582] ACPI: Interpreter enabled
[  21.725585] ACPI: (supports S0 S1 S3 S4 S5)
[  21.725602] ACPI: Using IOAPIC for interrupt routing
[  21.733829] ACPI: PCI Root Bridge [PCI0] (0000:00)
[  21.733847] PCI: Probing PCI hardware (bus 00)
[  21.735423] PCI: Transparent bridge - 0000:00:13.1
[  21.735476] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[  21.735618] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[  21.735689] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PA._PRT]
[  21.735817] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBPG._PRT]
[  21.748375] ACPI: PCI Root Bridge [PCI1] (0000:80)
[  21.748391] PCI: Probing PCI hardware (bus 80)
[  21.748518] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT]
[  21.748985] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[  21.749122] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[  21.749232] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
[  21.749341] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[  21.749450] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[  21.749566] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[  21.749682] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[  21.749797] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[  21.749899] Linux Plug and Play Support v0.97 (c) Adam Belay
[  21.749909] pnp: PnP ACPI init
[  21.749917] ACPI: bus type pnp registered
[  21.754460] pnp: PnP ACPI: found 15 devices
[  21.754462] ACPI: ACPI bus type pnp unregistered
[  21.754466] PnPBIOS: Disabled by ACPI PNP
[  21.754507] PCI: Using ACPI for IRQ routing
[  21.754510] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[  21.754516] PCI: Cannot allocate resource region 0 of device 0000:00:00.0
[  21.989173] NET: Registered protocol family 8
[  21.989175] NET: Registered protocol family 20
[  21.989220] pnp: 00:06: iomem range 0xfecc0000-0xfecc0fff has been reserved
[  21.989223] pnp: 00:06: iomem range 0x0-0x0 could not be reserved
[  21.989228] pnp: 00:08: iomem range 0xfec00000-0xfec00fff could not be reserved
[  21.989231] pnp: 00:08: iomem range 0xfee00000-0xfee00fff could not be reserved
[  21.989237] pnp: 00:0c: iomem range 0xe0000000-0xefffffff has been reserved
[  21.989242] pnp: 00:0d: iomem range 0x0-0x9ffff could not be reserved
[  21.989244] pnp: 00:0d: iomem range 0xc0000-0xcffff could not be reserved
[  21.989247] pnp: 00:0d: iomem range 0xe0000-0xfffff could not be reserved
[  21.989250] pnp: 00:0d: iomem range 0x100000-0x7fffffff could not be reserved
[  21.992853] Time: tsc clocksource has been installed.
[  22.019489] PCI: Bridge: 0000:00:01.0
[  22.019492]  IO window: e000-efff
[  22.019498]  MEM window: fea00000-feafffff
[  22.019502]  PREFETCH window: d0000000-dfffffff
[  22.019507] PCI: Bridge: 0000:00:02.0
[  22.019508]  IO window: disabled.
[  22.019513]  MEM window: disabled.
[  22.019518]  PREFETCH window: fdf00000-fdffffff
[  22.019524] PCI: Bridge: 0000:00:13.1
[  22.019525]  IO window: disabled.
[  22.019530]  MEM window: disabled.
[  22.019533]  PREFETCH window: disabled.
[  22.019552] PCI: Setting latency timer of device 0000:00:01.0 to 64
[  22.019570] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 27 (level, low) -> IRQ 16
[  22.019575] PCI: Setting latency timer of device 0000:00:02.0 to 64
[  22.019590] PCI: Setting latency timer of device 0000:00:13.1 to 64
[  22.019600] NET: Registered protocol family 2
[  22.056921] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[  22.056963] TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
[  22.057574] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[  22.057786] TCP: Hash tables configured (established 131072 bind 65536)
[  22.057788] TCP reno registered
[  22.069007] checking if image is initramfs... it is
[  22.520550] Switched to high resolution mode on CPU 0
[  22.520620] Switched to high resolution mode on CPU 1
[  22.668029] Freeing initrd memory: 7012k freed
[  22.668656] audit: initializing netlink socket (disabled)
[  22.668674] audit(1204564031.516:1): initialized
[  22.668765] highmem bounce pool size: 64 pages
[  22.670368] VFS: Disk quotas dquot_6.5.1
[  22.670410] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[  22.670496] io scheduler noop registered
[  22.670498] io scheduler anticipatory registered
[  22.670500] io scheduler deadline registered
[  22.670512] io scheduler cfq registered (default)
[  22.670532] PCI: VIA PCI bridge detected. Disabling DAC.
[  22.670609] Boot video device is 0000:01:00.0
[  22.670696] PCI: Setting latency timer of device 0000:00:02.0 to 64
[  22.670747] assign_interrupt_mode Found MSI capability
[  22.670749] Allocate Port Service[0000:00:02.0:pcie00]
[  22.670777] Allocate Port Service[0000:00:02.0:pcie02]
[  22.670918] isapnp: Scanning for PnP cards...
[  23.024746] isapnp: No Plug & Play device found
[  23.042254] Real Time Clock Driver v1.12ac
[  23.042361] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[  23.042459] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[  23.043042] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[  23.043601] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[  23.043799] input: Macintosh mouse button emulation as /class/input/input0
[  23.043870] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[  23.044692] serio: i8042 KBD port at 0x60,0x64 irq 1
[  23.044697] serio: i8042 AUX port at 0x60,0x64 irq 12
[  23.044793] mice: PS/2 mouse device common for all mice
[  23.044873] EISA: Probing bus 0 at eisa.0
[  23.044914] EISA: Detected 0 cards.
[  23.044997] TCP cubic registered
[  23.045009] NET: Registered protocol family 1
[  23.045028] Using IPI No-Shortcut mode
[  23.045194]  Magic number: 0:74:137
[  23.045472] Freeing unused kernel memory: 364k freed
[  23.064233] input: AT Translated Set 2 keyboard as /class/input/input1
[  24.223756] AppArmor: AppArmor initializedaudit(1204564033.016:2):  type=1505 info="AppArmor initialized" pid=1235
[  24.230670] fuse init (API version 7.
[  24.235390] Failure registering capabilities with primary security module.
[  24.251899] ACPI: Processor [CPU1] (supports 16 throttling states)
[  24.252082] ACPI: Processor [CPU2] (supports 16 throttling states)
[  24.252092] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
[  24.252102] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
[  24.623113] usbcore: registered new interface driver usbfs
[  24.623134] usbcore: registered new interface driver hub
[  24.623155] usbcore: registered new device driver usb
[  24.623817] USB Universal Host Controller Interface driver v3.0
[  24.623901] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 20 (level, low) -> IRQ 17
[  24.623912] uhci_hcd 0000:00:10.0: UHCI Host Controller
[  24.624049] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[  24.624073] uhci_hcd 0000:00:10.0: irq 17, io base 0x0000c480
[  24.624205] usb usb1: configuration #1 chosen from 1 choice
[  24.624226] hub 1-0:1.0: USB hub found
[  24.624231] hub 1-0:1.0: 2 ports detected
[  24.665814] SCSI subsystem initialized
[  24.716136] libata version 2.21 loaded.
[  24.716165] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[  24.716168] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[  24.727442] ACPI: PCI Interrupt 0000:00:10.1 -> GSI 22 (level, low) -> IRQ 18
[  24.727454] uhci_hcd 0000:00:10.1: UHCI Host Controller
[  24.727473] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
[  24.727498] uhci_hcd 0000:00:10.1: irq 18, io base 0x0000c800
[  24.727582] usb usb2: configuration #1 chosen from 1 choice
[  24.727604] hub 2-0:1.0: USB hub found
[  24.727609] hub 2-0:1.0: 2 ports detected
[  24.741925] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
[  24.744005] Floppy drive(s): fd0 is 1.44M
[  24.763153] FDC 0 is a post-1991 82077
[  24.831316] ACPI: PCI Interrupt 0000:00:10.2[C] -> GSI 21 (level, low) -> IRQ 19
[  24.831325] uhci_hcd 0000:00:10.2: UHCI Host Controller
[  24.831344] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
[  24.831368] uhci_hcd 0000:00:10.2: irq 19, io base 0x0000c880
[  24.831450] usb usb3: configuration #1 chosen from 1 choice
[  24.831472] hub 3-0:1.0: USB hub found
[  24.831477] hub 3-0:1.0: 2 ports detected
[  24.935234] ACPI: PCI Interrupt 0000:00:10.3[D] -> GSI 23 (level, low) -> IRQ 20
[  24.935242] uhci_hcd 0000:00:10.3: UHCI Host Controller
[  24.935259] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
[  24.935281] uhci_hcd 0000:00:10.3: irq 20, io base 0x0000cc00
[  24.935362] usb usb4: configuration #1 chosen from 1 choice
[  24.935382] hub 4-0:1.0: USB hub found
[  24.935387] hub 4-0:1.0: 2 ports detected
[  24.967151] usb 1-1: new full speed USB device using uhci_hcd and address 2
[  25.039370] VP_IDE: IDE controller at PCI slot 0000:00:0f.1
[  25.039389] VP_IDE: chipset revision 7
[  25.039391] VP_IDE: not 100% native mode: will probe irqs later
[  25.039403] VP_IDE: VIA vt8237s (rev 00) IDE UDMA133 controller on pci0000:00:0f.1
[  25.039410]    ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio
[  25.039421]    ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:pio, hdd:pio
[  25.039427] Probing IDE interface ide0...
[  25.135838] usb 1-1: configuration #1 chosen from 1 choice
[  25.902729] hda: Hewlett-Packard DVD Writer 300, ATAPI CD/DVD-ROM drive
[  26.574522] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[  26.578145] Probing IDE interface ide1...
[  27.145985] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 20
[  27.146164] eth0: VIA Rhine II at 0x1c000, 00:19:66:3b:d2:4e, IRQ 20.
[  27.146908] eth0: MII PHY found at address 1, status 0x7849 advertising 01e1 Link 0000.
[  27.146954] ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 19
[  27.146963] ehci_hcd 0000:00:10.4: EHCI Host Controller
[  27.147075] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5
[  27.147101] ehci_hcd 0000:00:10.4: debug port 1
[  27.147109] ehci_hcd 0000:00:10.4: irq 19, io mem 0xfe9ffc00
[  27.147115] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[  27.147371] usb usb5: configuration #1 chosen from 1 choice
[  27.147483] hub 5-0:1.0: USB hub found
[  27.147489] hub 5-0:1.0: 8 ports detected
[  27.245880] usb 1-1: USB disconnect, address 2
[  27.251944] sata_via 0000:00:0f.0: version 2.2
[  27.251963] ACPI: PCI Interrupt 0000:00:0f.0 -> GSI 21 (level, low) -> IRQ 19
[  27.251992] sata_via 0000:00:0f.0: routed to hard irq line 5
[  27.252059] scsi0 : sata_via
[  27.252092] scsi1 : sata_via
[  27.252286] ata1: SATA max UDMA/133 cmd 0x0001dc00 ctl 0x0001d882 bmdma 0x0001d400 irq 19
[  27.252290] ata2: SATA max UDMA/133 cmd 0x0001d800 ctl 0x0001d482 bmdma 0x0001d408 irq 19
[  27.257717] hda: ATAPI 40X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
[  27.257723] Uniform CD-ROM driver Revision: 3.20
[  27.453750] ata1: SATA link up 1.5 Gbps (SStatus 123 SControl 300)
[  27.613660] usb 5-1: new high speed USB device using ehci_hcd and address 2
[  27.637957] ata1.00: ATA-7: WDC WD1600JS-75NCB2, 10.02E03, max UDMA/133
[  27.637960] ata1.00: 312500000 sectors, multi 16: LBA48 NCQ (depth 0/32)
[  27.645952] ata1.00: configured for UDMA/133
[  27.750384] usb 5-1: configuration #1 chosen from 1 choice
[  27.849526] ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[  27.860329] scsi 0:0:0:0: Direct-Access    ATA      WDC WD1600JS-75N 10.0 PQ: 0 ANSI: 5
[  27.864993] sd 0:0:0:0: [sda] 312500000 512-byte hardware sectors (160000 MB)
[  27.865004] sd 0:0:0:0: [sda] Write Protect is off
[  27.865006] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[  27.865019] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[  27.865056] sd 0:0:0:0: [sda] 312500000 512-byte hardware sectors (160000 MB)
[  27.865064] sd 0:0:0:0: [sda] Write Protect is off
[  27.865066] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[  27.865079] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[  27.865082]  sda: sda1 sda2 sda3 sda4
[  27.897271] sd 0:0:0:0: [sda] Attached SCSI disk
[  27.900397] sd 0:0:0:0: Attached scsi generic sg0 type 0
[  28.214901] Attempting manual resume
[  28.214904] swsusp: Resume From Partition 8:3
[  28.214906] PM: Checking swsusp image.
[  28.215046] PM: Resume from disk failed.
[  34.161165] ip_tables: (C) 2000-2006 Netfilter Core Team
[  34.189603] Netfilter messages via NETLINK v0.30.
[  34.198727] nf_conntrack version 0.5.0 (8192 buckets, 65536 max)
[  35.272058] Linux agpgart interface v0.102 (c) Dave Jones
[  35.276470] agpgart: Detected VIA PT880 Ultra chipset
[  35.280885] agpgart: AGP aperture is 32M @ 0xfc000000
[  35.317401] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[  35.319633] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[  35.477456] input: PC Speaker as /class/input/input2
[  35.609952] ieee80211_crypt: registered algorithm 'NULL'
[  35.612047] ieee80211: 802.11 data/management/control stack, git-1.1.13
[  35.612049] ieee80211: Copyright (C) 2004-2005 Intel Corporation
[  35.709458] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[  35.727799] [fglrx] Maximum main memory to use for locked dma buffers: 1899 MBytes.
[  35.727832] [fglrx] ASYNCIO init succeed!
[  35.730386] [fglrx] PAT is enabled successfully!
[  35.730694] [fglrx] module loaded - fglrx 8.45.5 [Feb  1 2008] on minor 0
[  35.920984] usb 5-1: reset high speed USB device using ehci_hcd and address 2
[  36.075583] ACPI: PCI Interrupt 0000:80:01.0[A] -> GSI 17 (level, low) -> IRQ 21
[  36.075604] PCI: Setting latency timer of device 0000:80:01.0 to 64
[  36.105987] input: PS/2 Logitech Mouse as /class/input/input3
[  36.106808] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
[  36.109070] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[  36.163777] zd1211rw 5-1:1.0: firmware version 4725
[  36.205760] zd1211rw 5-1:1.0: zd1211b chip 0baf:0121 v4810 high 00-14-c1 AL2230_RF pa0 g--NS
[  36.208140] zd1211rw 5-1:1.0: eth1
[  36.208152] usbcore: registered new interface driver zd1211rw
[  36.935155] lp0: using parport0 (interrupt-driven).
[  36.979830] Adding 2441872k swap on /dev/sda3.  Priority:-1 extents:1 across:2441872k
[  37.735703] EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
[  38.385283] xt_hashlimit: Unknown symbol ipv6_find_hdr
[  38.694298] ClusterIP Version 0.8 loaded successfully
[  40.417798] No dock devices found.
[  40.462428] input: Power Button (FF) as /class/input/input4
[  40.462450] ACPI: Power Button (FF) [PWRF]
[  40.462535] input: Sleep Button (CM) as /class/input/input5
[  40.462550] ACPI: Sleep Button (CM) [SLPB]
[  40.462582] input: Power Button (CM) as /class/input/input6
[  40.462593] ACPI: Power Button (CM) [PWRB]
[  42.697438] NET: Registered protocol family 10
[  42.697524] lo: Disabled Privacy Extensions
[  42.785596] eth0: link down
[  42.787290] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  42.861557] ADDRCONF(NETDEV_UP): eth1: link is not ready
[  43.161035] ppdev: user-space parallel port driver
[  43.299854] audit(1204560453.138:3):  type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=5796 profile="/usr/sbin/cupsd"
[  45.221727] apm: BIOS version 1.2 Flags 0x02 (Driver version 1.16ac)
[  45.221731] apm: disabled - APM is not SMP safe.
[  46.103631] Failure registering capabilities with primary security module.
[  46.241325] Bluetooth: Core ver 2.11
[  46.241387] NET: Registered protocol family 31
[  46.241389] Bluetooth: HCI device and connection manager initialized
[  46.241392] Bluetooth: HCI socket layer initialized
[  46.249679] Bluetooth: L2CAP ver 2.8
[  46.249683] Bluetooth: L2CAP socket layer initialized
[  46.301664] Bluetooth: RFCOMM socket layer initialized
[  46.301678] Bluetooth: RFCOMM TTY layer initialized
[  46.301680] Bluetooth: RFCOMM ver 1.8
[  48.559478] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 22
[  49.901679] [fglrx] Internal AGP support requested, but kernel AGP support active.
[  49.901684] [fglrx] Have to use kernel AGP support to avoid conflicts.
[  49.901688] [fglrx] AGP detected, AgpState  = 0x1f000a0b (hardware caps of chipset)
[  49.901746] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
[  49.901769] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
[  49.901882] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
[  49.901911] [fglrx] AGP enabled,  AgpCommand = 0x1f000302 (selected caps)
[  49.940026] [fglrx] Reserve Block - 0 offset =  0X1fffb000 length = 0X5000
[  49.940031] [fglrx] Reserve Block - 1 offset =  0X0 length = 0X1000000
[  49.940034] [fglrx] Reserve Block - 2 offset =  0Xffb8000 length = 0X48000
[  50.095613] [fglrx] interrupt source 20008000 successfully enabled
[  50.095618] [fglrx] enable ID = 0x00000008
[  50.095629] [fglrx] Receive enable interrupt message with irqEnableMask: 20008000
[  50.095669] [fglrx] interrupt source 10000000 successfully enabled
[  50.095671] [fglrx] enable ID = 0x00000009
[  50.095675] [fglrx] Receive enable interrupt message with irqEnableMask: 10000000
[  56.141945] hda-intel: Invalid position buffer, using LPIB read method instead.
[  249.818497] NET: Registered protocol family 17
[  250.219852] SoftMAC: Open Authentication completed with 00:c0:02:0a:41:32
[  250.232166] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[  250.536155] ieee80211_crypt: registered algorithm 'TKIP'
[  270.616678] eth1: no IPv6 routers present
[  285.079977] Inbound IN=eth1 OUT= MAC=00:14:c1:39:96:bd:00:c0:02:0a:41:32:08:00 SRC=79.140.80.59 DST=192.168.0.12 LEN=40 TOS=0x00 PREC=0x00 TTL=56 ID=2567 DF PROTO=TCP SPT=80 DPT=43940 WINDOW=6432 RES=0x00 ACK URGP=0
[  404.977149] Inbound IN=eth1 OUT= MAC=00:14:c1:39:96:bd:00:c0:02:0a:41:32:08:00 SRC=79.140.80.59 DST=192.168.0.12 LEN=40 TOS=0x00 PREC=0x00 TTL=56 ID=2568 DF PROTO=TCP SPT=80 DPT=43940 WINDOW=6432 RES=0x00 ACK URGP=0
[  507.639085] zd1211rw 5-1:1.0: error ioread32(CR_REG1): -110
[  524.880892] Inbound IN=eth1 OUT= MAC=00:14:c1:39:96:bd:00:c0:02:0a:41:32:08:00 SRC=79.140.80.59 DST=192.168.0.12 LEN=40 TOS=0x00 PREC=0x00 TTL=56 ID=2569 DF PROTO=TCP SPT=80 DPT=43940 WINDOW=6432 RES=0x00 ACK URGP=0
[  644.775812] Inbound IN=eth1 OUT= MAC=00:14:c1:39:96:bd:00:c0:02:0a:41:32:08:00 SRC=79.140.80.59 DST=192.168.0.12 LEN=40 TOS=0x00 PREC=0x00 TTL=56 ID=2570 DF PROTO=TCP SPT=80 DPT=43940 WINDOW=6432 RES=0x00 ACK URGP=0
[  764.671733] Inbound IN=eth1 OUT= MAC=00:14:c1:39:96:bd:00:c0:02:0a:41:32:08:00 SRC=79.140.80.59 DST=192.168.0.12 LEN=40 TOS=0x00 PREC=0x00 TTL=56 ID=2571 DF PROTO=TCP SPT=80 DPT=43940 WINDOW=6432 RES=0x00 ACK URGP=0
[  884.569396] Inbound IN=eth1 OUT= MAC=00:14:c1:39:96:bd:00:c0:02:0a:41:32:08:00 SRC=79.140.80.59 DST=192.168.0.12 LEN=40 TOS=0x00 PREC=0x00 TTL=56 ID=2572 DF PROTO=TCP SPT=80 DPT=43940 WINDOW=6432 RES=0x00 ACK URGP=0
[ 1004.467508] Inbound IN=eth1 OUT= MAC=00:14:c1:39:96:bd:00:c0:02:0a:41:32:08:00 SRC=79.140.80.59 DST=192.168.0.12 LEN=40 TOS=0x00 PREC=0x00 TTL=56 ID=2573 DF PROTO=TCP SPT=80 DPT=43940 WINDOW=6432 RES=0x00 ACK URGP=0
[ 1124.365951] Inbound IN=eth1 OUT= MAC=00:14:c1:39:96:bd:00:c0:02:0a:41:32:08:00 SRC=79.140.80.59 DST=192.168.0.12 LEN=40 TOS=0x00 PREC=0x00 TTL=56 ID=2574 DF PROTO=TCP SPT=80 DPT=43940 WINDOW=6432 RES=0x00 ACK URGP=0
[ 1244.263217] Inbound IN=eth1 OUT= MAC=00:14:c1:39:96:bd:00:c0:02:0a:41:32:08:00 SRC=79.140.80.59 DST=192.168.0.12 LEN=40 TOS=0x00 PREC=0x00 TTL=56 ID=2575 DF PROTO=TCP SPT=80 DPT=43940 WINDOW=6432 RES=0x00 ACK URGP=0
[ 1364.930591] Inbound IN=eth1 OUT= MAC=00:14:c1:39:96:bd:00:c0:02:0a:41:32:08:00 SRC=79.140.80.59 DST=192.168.0.12 LEN=40 TOS=0x00 PREC=0x00 TTL=56 ID=2576 DF PROTO=TCP SPT=80 DPT=43940 WINDOW=6432 RES=0x00 ACK URGP=0
[ 1484.060864] Inbound IN=eth1 OUT= MAC=00:14:c1:39:96:bd:00:c0:02:0a:41:32:08:00 SRC=79.140.80.59 DST=192.168.0.12 LEN=40 TOS=0x00 PREC=0x00 TTL=56 ID=2577 DF PROTO=TCP SPT=80 DPT=43940 WINDOW=6432 RES=0x00 ACK URGP=0
[ 1603.960427] Inbound IN=eth1 OUT= MAC=00:14:c1:39:96:bd:00:c0:02:0a:41:32:08:00 SRC=79.140.80.59 DST=192.168.0.12 LEN=40 TOS=0x00 PREC=0x00 TTL=56 ID=2578 DF PROTO=TCP SPT=80 DPT=43940 WINDOW=6432 RES=0x00 ACK URGP=0
[ 1723.861177] Inbound IN=eth1 OUT= MAC=00:14:c1:39:96:bd:00:c0:02:0a:41:32:08:00 SRC=79.140.80.59 DST=192.168.0.12 LEN=40 TOS=0x00 PREC=0x00 TTL=56 ID=2579 DF PROTO=TCP SPT=80 DPT=43940 WINDOW=6432 RES=0x00 ACK URGP=0
[ 3160.788037] [fglrx] Internal AGP support requested, but kernel AGP support active.
[ 3160.788043] [fglrx] Have to use kernel AGP support to avoid conflicts.
[ 3160.788047] [fglrx] AGP detected, AgpState  = 0x1f000a0b (hardware caps of chipset)
[ 3160.788525] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
[ 3160.788671] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
[ 3160.788991] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
[ 3160.789145] [fglrx] AGP enabled,  AgpCommand = 0x1f000302 (selected caps)
[ 3160.829522] [fglrx:fireglAsyncioIntEnableMsgHandler] *ERROR* IRQMGR returned error 1 when trying to enable interrupt source 20008000
[ 3160.829530] [fglrx] Receive enable interrupt message with irqEnableMask: 20008000
[ 3160.829904] [fglrx:fireglAsyncioIntEnableMsgHandler] *ERROR* IRQMGR returned error 1 when trying to enable interrupt source 10000000
[ 3160.829908] [fglrx] Receive enable interrupt message with irqEnableMask: 10000000
[ 3185.306982] [fglrx] Internal AGP support requested, but kernel AGP support active.
[ 3185.306987] [fglrx] Have to use kernel AGP support to avoid conflicts.
[ 3185.306991] [fglrx] AGP detected, AgpState  = 0x1f000a0b (hardware caps of chipset)
[ 3185.307564] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
[ 3185.307735] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
[ 3185.307993] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
[ 3185.308168] [fglrx] AGP enabled,  AgpCommand = 0x1f000302 (selected caps)
[ 3185.308440] [fglrx] PCIe has already been initialized. Reinitializing ...
[ 3185.346278] [fglrx] Reserve Block - 0 offset =  0X1fffb000 length = 0X5000
[ 3185.346282] [fglrx] Reserve Block - 1 offset =  0X0 length = 0X1000000
[ 3185.346285] [fglrx] Reserve Block - 2 offset =  0Xffb8000 length = 0X48000
[ 3185.382167] [fglrx] interrupt source 20008000 successfully enabled
[ 3185.382174] [fglrx] enable ID = 0x00000008
[ 3185.382184] [fglrx] Receive enable interrupt message with irqEnableMask: 20008000
[ 3185.382223] [fglrx] interrupt source 10000000 successfully enabled
[ 3185.382225] [fglrx] enable ID = 0x00000009
[ 3185.382229] [fglrx] Receive enable interrupt message with irqEnableMask: 10000000

[Xplor]

Buonasera e scusate la mia ignoranza sapete se la dicitura PCI: cannot allocate resource region 0 of device 0000:00:00.0 - si puo risolvere con la procedura segnalata qui sopra?