bordi finetre

Personalizzazione grafica del sistema: icone, temi, sfondi, suoni, eccetera.
Scrivi risposta
kikko088
Prode Principiante
Messaggi: 122
Iscrizione: sabato 20 ottobre 2007, 13:11

bordi finetre

Messaggio da kikko088 »

ciao a tutti ho installato compiz, tutto perfetto tranne il fatto che alle volte i bordi delle finestre diventano bianchi, e devo passare sulla x per farlo tornare a posto, ho provato a fare metacity --replace ma oltre ad avermi tolto i driver con restrizione e tutti gli effetti al riavvio non è cambiato niente....come posso fare??


kikko088
Avatar utente
Zet
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 549
Iscrizione: domenica 26 marzo 2006, 19:56

Re: bordi finetre

Messaggio da Zet »

kikko088 ha scritto: ciao a tutti ho installato compiz, tutto perfetto tranne il fatto che alle volte i bordi delle finestre diventano bianchi, e devo passare sulla x per farlo tornare a posto, ho provato a fare metacity --replace ma oltre ad avermi tolto i driver con restrizione e tutti gli effetti al riavvio non è cambiato niente....come posso fare??


kikko088
il problema delle finestre bianche credo sia un bug, aspetta che lo correggano  ;)

il resto, scusa ma ha poco senso, metacity --replace non ti ha tolto i driver con restrizioni, tranquillo.
http://save0matic.wordpress.com/
Semprepiuateo ha scritto: Si sente sapore di sale..............
kikko088
Prode Principiante
Messaggi: 122
Iscrizione: sabato 20 ottobre 2007, 13:11

Re: bordi finetre

Messaggio da kikko088 »

mmmm non avrà senso ma ma appena gli ho dato il comando me li ha disattivati....ho dovuto riattivarli e dopo ha funzionato, ma ora a ogni riavvio gli effetti vengono disattivati.....




kikko088
Avatar utente
Zet
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 549
Iscrizione: domenica 26 marzo 2006, 19:56

Re: bordi finetre

Messaggio da Zet »

una cosa sono i driver, un'altra gli effetti. Dopo metacity --replace ti ha disabilitato i driver?? com'è possibile, per fare una cosa simile devi avere i pivilegi di root  per modificare xorg.conf! non è che hai dato qualche comando con sudo?

Ma poi, appena avvi andando su "sistema>preferenze>aspetto>effetti grafici" cosa trovi??
http://save0matic.wordpress.com/
Semprepiuateo ha scritto: Si sente sapore di sale..............
kikko088
Prode Principiante
Messaggi: 122
Iscrizione: sabato 20 ottobre 2007, 13:11

Re: bordi finetre

Messaggio da kikko088 »

mi da effetti assenti, e se provo a mettere quelli personalizzati mi dice che non può, apetto un po (da ieri è visibilmente + lento nell'avvio dopo il login) e me li attiva.....il replace l'ho dato senza i permessi di root, hai parlato del file xorg.conf dove si trova questo file? in che cartella...se posto il contenuto possiamo dargli un'occhiata?




kikko088
Avatar utente
Zet
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 549
Iscrizione: domenica 26 marzo 2006, 19:56

Re: bordi finetre

Messaggio da Zet »

kikko088 ha scritto: mi da effetti assenti, e se provo a mettere quelli personalizzati mi dice che non può, apetto un po (da ieri è visibilmente + lento nell'avvio dopo il login) e me li attiva.....il replace l'ho dato senza i permessi di root, hai parlato del file xorg.conf dove si trova questo file? in che cartella...se posto il contenuto possiamo dargli un'occhiata?




kikko088

praticamente, tu hai visto i bordi bianchi, quindi hai aperto un terminale e hai dato:

Codice: Seleziona tutto

metacity --replace
da quel momento sei andato in "sistema> amministrazione>gestore driver con restrizioni", hai dato la password di superuser (la tua per intenderci) e hai trovato i tuoi driver disabilitati?

se è così dai due comandi

Codice: Seleziona tutto

compiz --replace
e

Codice: Seleziona tutto

cat /etc/X11/xorg.conf
e postaci cosa ti scrive in entrambi
http://save0matic.wordpress.com/
Semprepiuateo ha scritto: Si sente sapore di sale..............
kikko088
Prode Principiante
Messaggi: 122
Iscrizione: sabato 20 ottobre 2007, 13:11

Re: bordi finetre

Messaggio da kikko088 »

allora questo è il compiz --replace

Codice: Seleziona tutto

kikko@kikko:~$ compiz --replace
Checking for Xgl: not present. 
Detected PCI ID for VGA: 03:00.0 0300: 10de:0140 (rev a2) (prog-if 00 [VGA])
Checking for texture_from_pixmap: present. 
Checking for non power of two support: present. 
Checking for Composite extension: present. 
Comparing resolution (1280x1024) to maximum 3D texture size (4096): Passed.
Checking for nVidia: present. 
Checking for FBConfig: present. 
Checking for Xgl: not present. 
Starting gtk-window-decorator
/usr/bin/compiz.real (video) - Warn: No 8 bit GLX pixmap format, disabling YV12 image format
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for the path starting with path[0] = "org"


se chiudo il terminale mi va a schermo pienoi, le due barre non ci sono + e diventa ingestibilie

mentre questo è il xorg.conf

Codice: Seleziona tutto

kikko@kikko:~$ cat /etc/X11/xorg.conf
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 1.0  (buildmeister@builder3)  Thu Oct  4 10:33:51 PDT 2007

# xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "ServerLayout"

        # Uncomment if you have a wacom tablet
        #       InputDevice     "stylus"        "SendCoreEvents"
        #       InputDevice     "cursor"        "SendCoreEvents"
        #       InputDevice     "eraser"        "SendCoreEvents"
        Identifier      "Default Layout"
  screen "Default Screen" 0 0
        Inputdevice     "Generic Keyboard"
        Inputdevice     "Configured Mouse"
EndSection

Section "Files"
EndSection

Section "Module"
        Load            "glx"
EndSection

Section "InputDevice"
        Identifier      "Generic Keyboard"
        Driver          "kbd"
        Option          "CoreKeyboard"
        Option          "XkbRules"      "xorg"
        Option          "XkbModel"      "pc105"
        Option          "XkbLayout"     "it"
EndSection

Section "InputDevice"
        Identifier      "Configured Mouse"
        Driver          "mouse"
        Option          "CorePointer"
        Option          "Device"        "/dev/input/mice"
        Option          "Protocol"      "ImPS/2"
        Option          "ZAxisMapping"  "4 5"
        Option          "Emulate3Buttons"       "true"
EndSection

Section "InputDevice"
        Identifier      "stylus"
        Driver          "wacom"
        Option          "Device"        "/dev/input/wacom"
        Option          "Type"  "stylus"
        Option          "ForceDevice"   "ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
        Identifier      "eraser"
        Driver          "wacom"
        Option          "Device"        "/dev/input/wacom"
        Option          "Type"  "eraser"
        Option          "ForceDevice"   "ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
        Identifier      "cursor"
        Driver          "wacom"
        Option          "Device"        "/dev/input/wacom"
        Option          "Type"  "cursor"
        Option          "ForceDevice"   "ISDV4"# Tablet PC ONLY
EndSection

Section "Monitor"
        Identifier      "Monitor Generico"
        Horizsync       28.0    -       64.0
        Vertrefresh     43.0    -       60.0
        Option          "DPMS"
EndSection

Section "Device"
        Identifier      "nVidia Corporation NV43 [GeForce 6600 GT]"
        Driver          "nvidia"
        Option          "AddARGBVisuals"        "True"
        Option          "AddARGBGLXVisuals"     "True"
        Option          "NoLogo"        "True"
EndSection

Section "Screen"
        Identifier      "Default Screen"
        Device          "nVidia Corporation NV43 [GeForce 6600 GT]"
        Monitor         "Monitor Generico"
        Defaultdepth    24
        Option          "AddARGBVisuals"        "True"
        Option          "NoLogo"        "True"
        Option          "AddARGBGLXVisuals"     "True"
        SubSection "Display"
                Depth   24
                Modes           "1280x1024"     "1240x1240"     "1024x768"     "800x600"        "720x400"       "640x480"
        EndSubSection
EndSection

Section "Extensions"
        Option          "Composite"     "Enable"
EndSection

kikko@kikko:~$ 

kikko088
Ultima modifica di kikko088 il lunedì 19 novembre 2007, 20:03, modificato 1 volta in totale.
Avatar utente
Zet
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 549
Iscrizione: domenica 26 marzo 2006, 19:56

Re: bordi finetre

Messaggio da Zet »

stai usando i driver nvidia. Quindi non te li ha disabilitati.

non so aiutarti su quale possa essere il problema, posso solo dirti che se veramente non riesci ad impostare che gli effetti grafici si attivino all'avvio puoi fare

sistem>preferenze>sessioni

e aggiungere una voce con

Codice: Seleziona tutto

compiz --replace
ps. dopo compiz --replace gli effetti partono, vero?

edit. ma hai modificato il post mentre scrivevo? perchè la parte

A handler is already registered for the path starting with path[0] = "org"

non c'era  ???

a questo punto il problema è più grosso, e non so al momento la soluzione. La potrei trovare su google ma ora devo uscire prova a dare un'occhiata tu.

http://www.google.it/search?q=A+handler ... =firefox-a
Ultima modifica di Zet il lunedì 19 novembre 2007, 20:11, modificato 1 volta in totale.
http://save0matic.wordpress.com/
Semprepiuateo ha scritto: Si sente sapore di sale..............
Avatar utente
igiankat
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 635
Iscrizione: sabato 25 novembre 2006, 20:29
Contatti:

Re: bordi finetre

Messaggio da igiankat »

ciao,
dunque per quanto riguarda il problema dell'"effetto" bianco sulla barra delle finestre, sappi che (lo avevo anche io) puoi risolverlo cambiando il tema delle stesse, io ad esempio ho utilizzato EMERALD risolvendo...
prova e fammi sapere.
mentre per quanto riguarda l'avvio automatico di compiz all'accensione del pc devi fare così:
apri SISTEMA, poi clicca su PREFERENZE e infine su SESSIONI. qui clicca su AGGIUNGI e scrivi su nome COMPIZ FUSION, su comando  /usr/bin/fusion-icon
salva e chiudi. All'avvio andrà in automatico  ;)

aspetto tue notizie...
se risolvi modifica il titolo aggiungendo RISOLTO.
(b2b)
kikko088
Prode Principiante
Messaggi: 122
Iscrizione: sabato 20 ottobre 2007, 13:11

Re: bordi finetre

Messaggio da kikko088 »

Zet ha scritto: stai usando i driver nvidia. Quindi non te li ha disabilitati.

non so aiutarti su quale possa essere il problema, posso solo dirti che se veramente non riesci ad impostare che gli effetti grafici si attivino all'avvio puoi fare

sistem>preferenze>sessioni

e aggiungere una voce con

Codice: Seleziona tutto

compiz --replace
ps. dopo compiz --replace gli effetti partono, vero?

edit. ma hai modificato il post mentre scrivevo? perchè la parte

A handler is already registered for the path starting with path[0] = "org"

non c'era  ???

a questo punto il problema è più grosso, e non so al momento la soluzione. La potrei trovare su google ma ora devo uscire prova a dare un'occhiata tu.

http://www.google.it/search?q=A+handler ... =firefox-a

si mi sa di averlo modificato mentre scrivevi, chiedo scusa, ma credevo fosse finito li invece dopo un po che aspettavo è venuta fuori anke quella parte li, ora ho dato compiz--replace facico un due controlli e poi vi dico come va
per ora grazie mille a tutti e due!!!



kikko088
Scrivi risposta

Ritorna a “Personalizzazione dell'ambiente desktop”

Chi c’è in linea

Visualizzano questa sezione: 0 utenti iscritti e 1 ospite