[Risolto] masterizzatore interno non riconosciuto
[Risolto] masterizzatore interno non riconosciuto
Salve a tutti anzi tutto complimenti per il forum che devo dire mi è stato utilissimo nel mio "passaggio" ad ubuntu (good)...dunque, qualche giorno fa ho sostituito il mio vecchio lettore cd interno con un masterizzatore DVD Lacie, che originariamente era esterno...purtroppo però al riavvio del sistema il masterizzatore non è accesibile ed anche se in "Computer" appare come "CD-ROM 1" non è possibile gestirlo in alcun modo :'(...ho cercato parecchio nel forum prima di arpire questo topic ma, forse per mia mancanza nello impostare i parametri di ricerca, non ho trovato nulla...vi prego aiutatemi sono giorni che faccio ogni genere di prova ormai
Ultima modifica di Kalel il martedì 18 dicembre 2007, 16:04, modificato 1 volta in totale.
-
carver55
- Entusiasta Emergente
- Messaggi: 2490
- Iscrizione: domenica 13 agosto 2006, 10:52
- Località: lucca
Re: [Install] masterizzatore interno non riconosciuto
guarda qui http://divilinux.wordpress.com/2007/04/ ... inux/
eventualmente puoi anche postare lì
eventualmente puoi anche postare lì
Linux User # 454540. Ubu user #17949
Ci sedemmo dalla parte del torto perchè tutti gli altri posti erano occupati.
Ci sedemmo dalla parte del torto perchè tutti gli altri posti erano occupati.
Re: [Install] masterizzatore interno non riconosciuto
c'è una sezione in particolare dove dovrei controllare?
Re: [Install] masterizzatore interno non riconosciuto
comunque posto di seguito il risultato di "dmesg", magari può essere utile a capire qual'è il problema
[ 18.379354] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 18.379535] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 18.380189] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 18.380492] 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 18.381398] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 18.381735] input: Macintosh mouse button emulation as /class/input/input0
[ 18.381842] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 18.384155] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 18.384164] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 18.384364] mice: PS/2 mouse device common for all mice
[ 18.384514] EISA: Probing bus 0 at eisa.0
[ 18.384554] EISA: Detected 0 cards.
[ 18.384659] TCP cubic registered
[ 18.384673] NET: Registered protocol family 1
[ 18.384697] Using IPI No-Shortcut mode
[ 18.384877] Magic number: 3:63:498
[ 18.385377] Freeing unused kernel memory: 364k freed
[ 18.410133] input: AT Translated Set 2 keyboard as /class/input/input1
[ 19.623856] AppArmor: AppArmor initializedaudit(1197577746.640:2): type=1505 info="AppArmor initialized" pid=1202
[ 19.630931] fuse init (API version 7.8 )
[ 19.636401] Failure registering capabilities with primary security module.
[ 19.671397] ACPI: Fan [FAN] (on)
[ 19.677725] ACPI: Thermal Zone [THRM] (35 C)
[ 20.295763] usbcore: registered new interface driver usbfs
[ 20.295818] usbcore: registered new interface driver hub
[ 20.295868] usbcore: registered new device driver usb
[ 20.297323] USB Universal Host Controller Interface driver v3.0
[ 20.297406] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 20.297422] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 20.297427] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 20.297601] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 20.297635] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000e300
[ 20.297818] usb usb1: configuration #1 chosen from 1 choice
[ 20.297873] hub 1-0:1.0: USB hub found
[ 20.297884] hub 1-0:1.0: 2 ports detected
[ 20.398323] ACPI: PCI Interrupt 0000:00:1d.1 -> GSI 19 (level, low) -> IRQ 17
[ 20.398344] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 20.398351] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 20.398399] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 20.398434] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000e000
[ 20.398605] usb usb2: configuration #1 chosen from 1 choice
[ 20.398651] hub 2-0:1.0: USB hub found
[ 20.398666] hub 2-0:1.0: 2 ports detected
[ 20.439872] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 20.471480] SCSI subsystem initialized
[ 20.479029] libata version 2.21 loaded.
[ 20.502169] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 20.502193] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 20.502203] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 20.502260] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 20.502300] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e100
[ 20.502487] usb usb3: configuration #1 chosen from 1 choice
[ 20.502534] hub 3-0:1.0: USB hub found
[ 20.502545] hub 3-0:1.0: 2 ports detected
[ 20.526381] Floppy drive(s): fd0 is 1.44M
[ 20.555358] FDC 0 is a post-1991 82077
[ 20.605925] ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 16
[ 20.605941] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 20.605947] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 20.605992] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 20.606020] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e200
[ 20.606172] usb usb4: configuration #1 chosen from 1 choice
[ 20.606223] hub 4-0:1.0: USB hub found
[ 20.606234] hub 4-0:1.0: 2 ports detected
[ 20.709764] ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 18 (level, low) -> IRQ 18
[ 20.709780] uhci_hcd 0000:02:02.0: UHCI Host Controller
[ 20.709821] uhci_hcd 0000:02:02.0: new USB bus registered, assigned bus number 5
[ 20.709850] uhci_hcd 0000:02:02.0: irq 18, io base 0x0000d000
[ 20.710009] usb usb5: configuration #1 chosen from 1 choice
[ 20.710055] hub 5-0:1.0: USB hub found
[ 20.710065] hub 5-0:1.0: 2 ports detected
[ 20.710117] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 19
[ 20.710133] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 20.710139] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 20.813590] ACPI: PCI Interrupt 0000:02:02.1 -> GSI 19 (level, low) -> IRQ 17
[ 20.813607] uhci_hcd 0000:02:02.1: UHCI Host Controller
[ 20.813649] uhci_hcd 0000:02:02.1: new USB bus registered, assigned bus number 6
[ 20.813679] uhci_hcd 0000:02:02.1: irq 17, io base 0x0000d100
[ 20.813834] usb usb6: configuration #1 chosen from 1 choice
[ 20.813877] hub 6-0:1.0: USB hub found
[ 20.813889] hub 6-0:1.0: 2 ports detected
[ 20.917788] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
[ 20.917833] PCI: cache line size of 128 is not supported by device 0000:00:1d.7
[ 20.917848] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xf6100000
[ 20.921742] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 20.921957] usb usb7: configuration #1 chosen from 1 choice
[ 20.922023] hub 7-0:1.0: USB hub found
[ 20.922034] hub 7-0:1.0: 8 ports detected
[ 21.025250] ACPI: PCI Interrupt 0000:02:02.2[C] -> GSI 16 (level, low) -> IRQ 16
[ 21.025271] ehci_hcd 0000:02:02.2: EHCI Host Controller
[ 21.025316] ehci_hcd 0000:02:02.2: new USB bus registered, assigned bus number 8
[ 21.025364] ehci_hcd 0000:02:02.2: irq 16, io mem 0xf6043000
[ 21.053037] usb 5-1: new full speed USB device using uhci_hcd and address 2
[ 21.053042] ehci_hcd 0000:02:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 21.053181] usb usb8: configuration #1 chosen from 1 choice
[ 21.053228] hub 8-0:1.0: USB hub found
[ 21.053240] hub 8-0:1.0: 4 ports detected
[ 21.157181] 8139cp 0000:02:0b.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
[ 21.157189] 8139cp 0000:02:0b.0: Try the "8139too" driver instead.
[ 21.161421] 8139too Fast Ethernet driver 0.9.28
[ 21.161501] ACPI: PCI Interrupt 0000:02:0b.0[A] -> GSI 23 (level, low) -> IRQ 19
[ 21.161896] eth0: RealTek RTL8139 at 0xe083a000, 00:13:d3:99:54:ed, IRQ 19
[ 21.161902] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[ 21.162113] ata_piix 0000:00:1f.1: version 2.11
[ 21.162132] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
[ 21.162175] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 21.162303] scsi0 : ata_piix
[ 21.162428] scsi1 : ata_piix
[ 21.162627] ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001f000 irq 14
[ 21.162633] ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001f008 irq 15
[ 21.326339] ata1.00: ATA-7: Maxtor 6L300R0, BAJ41G20, max UDMA/133
[ 21.326344] ata1.00: 586114704 sectors, multi 16: LBA48
[ 21.342304] ata1.00: configured for UDMA/133
[ 21.660301] ata2.00: ATAPI: _FEC DVD_RW ND-"510A, 205, max UDMA/33
[ 21.739909] usb 8-1: new high speed USB device using ehci_hcd and address 2
[ 21.832015] ata2.00: configured for UDMA/33
[ 21.832160] scsi 0:0:0:0: Direct-Access ATA Maxtor 6L300R0 BAJ4 PQ: 0 ANSI: 5
[ 21.872626] usb 8-1: configuration #1 chosen from 1 choice
[ 21.884391] usbcore: registered new interface driver libusual
[ 21.893900] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 21.893908] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 21.896727] Initializing USB Mass Storage driver...
[ 21.896831] scsi2 : SCSI emulation for USB Mass Storage devices
[ 21.896910] usb-storage: device found at 2
[ 21.896914] usb-storage: waiting for device to settle before scanning
[ 21.896935] usbcore: registered new interface driver usb-storage
[ 21.896940] USB Mass Storage support registered.
[ 26.887558] usb-storage: device scan complete
[ 26.888300] scsi 2:0:0:0: CD-ROM _NEC DVD_RW ND-3520A 1.04 PQ: 0 ANSI: 0
[ 26.912623] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[ 26.912629] Uniform CD-ROM driver Revision: 3.20
[ 26.912705] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 26.916756] scsi 0:0:0:0: Attached scsi generic sg0 type 0
[ 26.916794] sr 2:0:0:0: Attached scsi generic sg1 type 5
[ 27.322771] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
[ 27.322781] ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x12 data 36 in
[ 27.322783] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 27.322796] ata2: soft resetting port
[ 27.642527] ata2.00: model number mismatch '_FEC DVD_RW ND-"510A' != '_FEC DVD_RW ND-2510A'
[ 27.642532] ata2.00: revalidation failed (errno=-19)
[ 27.642539] ata2.00: limiting speed to UDMA/33:PIO3
[ 27.642541] ata2: failed to recover some devices, retrying in 5 secs
[ 32.638043] ata2: soft resetting port
[ 32.957776] ata2.00: model number mismatch '_FEC DVD_RW ND-"510A' != '_EC DVD_RW ND-"510A'
[ 32.957781] ata2.00: revalidation failed (errno=-19)
[ 32.957786] ata2.00: disabled
[ 33.460695] ata2: soft resetting port
[ 33.780422] ata2.00: ATAPI: _FEC DVD_RW ND-"510A, 205, max UDMA/33
[ 33.952145] ata2.00: model number mismatch '_FEC DVD_RW ND-"510A' != '_EC DVD_RW ND-"510A'
[ 33.952150] ata2.00: revalidation failed (errno=-19)
[ 33.952156] ata2.00: limiting speed to UDMA/33:PIO3
[ 33.952159] ata2: failed to recover some devices, retrying in 5 secs
[ 38.947699] ata2: soft resetting port
[ 39.267439] ata2.00: model number mismatch '_FEC DVD_RW ND-"510A' != '_EC DVD_RW ND-"510A'
[ 39.267444] ata2.00: revalidation failed (errno=-19)
[ 39.267449] ata2.00: disabled
[ 39.770356] ata2: EH complete
[ 39.779621] sd 0:0:0:0: [sda] 586114704 512-byte hardware sectors (300091 MB)
[ 39.779646] sd 0:0:0:0: [sda] Write Protect is off
[ 39.779651] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 39.779684] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 39.779795] sd 0:0:0:0: [sda] 586114704 512-byte hardware sectors (300091 MB)
[ 39.779818] sd 0:0:0:0: [sda] Write Protect is off
[ 39.779823] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 39.779863] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 39.779874] sda: sda2
[ 39.830876] sd 0:0:0:0: [sda] Attached SCSI disk
[ 40.211453] Attempting manual resume
[ 40.211457] swsusp: Resume From Partition 8:6
[ 40.211459] PM: Checking swsusp image.
[ 40.211649] PM: Resume from disk failed.
[ 40.234696] kjournald starting. Commit interval 5 seconds
[ 40.234712] EXT3-fs: mounted filesystem with ordered data mode.
[ 43.293021] eth0: link down
[ 44.843197] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 44.845441] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 45.020768] intel_rng: FWH not detected
[ 45.054425] iTCO_vendor_support: vendor-support=0
[ 45.055940] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
[ 45.056043] iTCO_wdt: Found a ICH5 or ICH5R TCO device (Version=1, TCOBASE=0x0460)
[ 45.056102] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 45.231814] Linux agpgart interface v0.102 (c) Dave Jones
[ 45.235272] agpgart: Detected an Intel 865 Chipset.
[ 45.237857] agpgart: AGP aperture is 64M @ 0xf0000000
[ 45.393520] input: PC Speaker as /class/input/input2
[ 45.757736] nvidia: module license 'NVIDIA' taints kernel.
[ 46.010925] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 46.011226] NVRM: loading NVIDIA UNIX x86 Kernel Module 100.14.19 Wed Sep 12 14:12:24 PDT 2007
[ 46.102286] acx: Loaded combined PCI/USB driver, firmware_ver=default
[ 46.102292] acx: compiled to use 32bit I/O access. I/O timing issues might occur, such as non-working firmware upload. Report them
[ 46.102379] ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 19 (level, low) -> IRQ 17
[ 46.102401] acx: found ACX111-based wireless network card at 0000:02:03.0, irq:17, phymem1:0xF6040000, phymem2:0xF6000000, mem1:0xe09dc000, mem1_size:8192, mem2:0xe0ac0000, mem2_size:131072
[ 46.103408] acx: loading firmware for acx1111 chipset with radio ID 16
[ 46.339245] input: ImExPS/2 Logitech MX Mouse as /class/input/input3
[ 46.343121] parport_pc 00:09: reported by Plug and Play ACPI
[ 46.343195] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 46.891172] NVS_vendor_offs:01CD probe_delay:200 eof_memory:1114112
[ 46.891177] CCAModes:04 Diversity:01 ShortPreOpt:01 PBCC:01 ChanAgil:00 PHY:05 Temp:01
[ 46.891180] AntennaID:00 Len:02 Data:01 02
[ 46.891184] PowerLevelID:01 Len:02 Data:001E 000A
[ 46.891188] DataRatesID:02 Len:05 Data:02 04 11 22 44
[ 46.891194] DomainID:03 Len:06 Data:30 20 10 31 32 41
[ 46.891201] ProductID:04 Len:09 Data:TI ACX100
[ 46.891203] ManufacturerID:05 Len:07 Data:TI Test
[ 46.950566] acx: === chipset TNETW1130, radio type 0x16 (Radia), form factor 0x01 ((mini-)PCI / CardBus), EEPROM version 0x05: uploaded firmware 'Rev 1.2.1.34' ===
[ 46.950703] acx v0.3.36: net device wlan0, driver compiled against wireless extensions 22 and Linux 2.6.22-14-generic
[ 46.950798] ACPI: PCI Interrupt 0000:00:1f.5 -> GSI 17 (level, low) -> IRQ 20
[ 46.950831] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[ 46.950975] usbcore: registered new interface driver acx_usb
[ 47.274044] intel8x0_measure_ac97_clock: measured 54715 usecs
[ 47.274049] intel8x0: clocking to 48000
[ 48.072766] lp0: using parport0 (interrupt-driven).
[ 48.162728] Adding 1469844k swap on /dev/sda6. Priority:-1 extents:1 across:1469844k
[ 48.497405] EXT3 FS on sda9, internal journal
[ 49.298978] kjournald starting. Commit interval 5 seconds
[ 49.299221] EXT3 FS on sda7, internal journal
[ 49.299227] EXT3-fs: mounted filesystem with ordered data mode.
[ 49.559894] kjournald starting. Commit interval 5 seconds
[ 49.560071] EXT3 FS on sda8, internal journal
[ 49.560077] EXT3-fs: mounted filesystem with ordered data mode.
[ 53.275537] input: Power Button (FF) as /class/input/input4
[ 53.275565] ACPI: Power Button (FF) [PWRF]
[ 53.275629] input: Power Button (CM) as /class/input/input5
[ 53.275652] ACPI: Power Button (CM) [PWRB]
[ 53.331876] No dock devices found.
[ 55.102600] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[ 55.102607] apm: disabled - APM is not SMP safe.
[ 55.733765] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 55.849712] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 55.855044] NFSD: starting 90-second grace period
[ 56.031340] Failure registering capabilities with primary security module.
[ 58.261810] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
[ 58.261835] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
[ 58.261873] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
[ 58.923070] Bluetooth: Core ver 2.11
[ 58.923607] NET: Registered protocol family 31
[ 58.923614] Bluetooth: HCI device and connection manager initialized
[ 58.923620] Bluetooth: HCI socket layer initialized
[ 58.971129] Bluetooth: L2CAP ver 2.8
[ 58.971138] Bluetooth: L2CAP socket layer initialized
[ 59.074002] Bluetooth: RFCOMM socket layer initialized
[ 59.074023] Bluetooth: RFCOMM TTY layer initialized
[ 59.074027] Bluetooth: RFCOMM ver 1.8
[ 59.232448] ppdev: user-space parallel port driver
[ 59.386729] audit(1197577787.298:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=5824 profile="/usr/sbin/cupsd"
[ 62.351117] NET: Registered protocol family 17
[ 67.009880] UDF-fs: No VRS found
[ 1002.956698] NET: Registered protocol family 10
[ 1002.956861] lo: Disabled Privacy Extensions
[ 1002.957071] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 1003.975971] wlan0: duplicate address detected!
[ 1413.030768] usb 8-1: USB disconnect, address 2
[ 1413.273831] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274064] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274161] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274167] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274173] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274178] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274183] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274188] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274193] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274198] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274203] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274208] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274213] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274218] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274223] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274228] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274233] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274238] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274243] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274248] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274253] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274258] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274263] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274269] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274274] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274279] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274284] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274289] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274294] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274299] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274304] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274309] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274314] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274319] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274324] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274329] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274334] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274339] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274344] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274349] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274354] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274359] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274364] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274369] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274374] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274380] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274385] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274390] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274395] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274400] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274405] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274410] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274415] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274420] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274425] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274430] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274435] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274440] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274445] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274450] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274455] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274460] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274465] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274470] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274475] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274480] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274485] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274490] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274496] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274501] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274506] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274511] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274516] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274521] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274526] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274531] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274536] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274541] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274546] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274551] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274556] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274561] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274566] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274571] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274576] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274581] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274586] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274591] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274596] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274601] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274606] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274612] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274617] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274622] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274627] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274632] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274637] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274642] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274647] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274652] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274657] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274662] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274667] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274672] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274677] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274682] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274687] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274692] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274697] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274702] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274707] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274713] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274718] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274723] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274728] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274733] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274738] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274743] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274748] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274753] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274758] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274763] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274768] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274773] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274778] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274783] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274788] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274793] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274798] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274804] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274809] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274814] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274819] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274824] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274829] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274834] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274839] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274844] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274849] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274854] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274859] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274864] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274869] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274874] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274879] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274884] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274889] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274895] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274900] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274905] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274910] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274915] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274920] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274927] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274940] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274948] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274955] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274962] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274969] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274977] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274984] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274991] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274998] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.275006] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.275013] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.275018] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.275023] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.275029] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.275034] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.275040] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.275045] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.275050] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.275056] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.275061] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.275066] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.275072] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.275077] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.275082] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.275088] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.275093] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.275098] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.275104] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.275109] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.275114] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.275120] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.275125] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.275130] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.275137] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.275142] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.275147] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.275348] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.275364] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.275373] scsi 2:0:0:0: rejecting I/O to dead device
[ 18.379354] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 18.379535] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 18.380189] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 18.380492] 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 18.381398] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 18.381735] input: Macintosh mouse button emulation as /class/input/input0
[ 18.381842] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 18.384155] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 18.384164] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 18.384364] mice: PS/2 mouse device common for all mice
[ 18.384514] EISA: Probing bus 0 at eisa.0
[ 18.384554] EISA: Detected 0 cards.
[ 18.384659] TCP cubic registered
[ 18.384673] NET: Registered protocol family 1
[ 18.384697] Using IPI No-Shortcut mode
[ 18.384877] Magic number: 3:63:498
[ 18.385377] Freeing unused kernel memory: 364k freed
[ 18.410133] input: AT Translated Set 2 keyboard as /class/input/input1
[ 19.623856] AppArmor: AppArmor initializedaudit(1197577746.640:2): type=1505 info="AppArmor initialized" pid=1202
[ 19.630931] fuse init (API version 7.8 )
[ 19.636401] Failure registering capabilities with primary security module.
[ 19.671397] ACPI: Fan [FAN] (on)
[ 19.677725] ACPI: Thermal Zone [THRM] (35 C)
[ 20.295763] usbcore: registered new interface driver usbfs
[ 20.295818] usbcore: registered new interface driver hub
[ 20.295868] usbcore: registered new device driver usb
[ 20.297323] USB Universal Host Controller Interface driver v3.0
[ 20.297406] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 20.297422] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 20.297427] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 20.297601] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 20.297635] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000e300
[ 20.297818] usb usb1: configuration #1 chosen from 1 choice
[ 20.297873] hub 1-0:1.0: USB hub found
[ 20.297884] hub 1-0:1.0: 2 ports detected
[ 20.398323] ACPI: PCI Interrupt 0000:00:1d.1 -> GSI 19 (level, low) -> IRQ 17
[ 20.398344] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 20.398351] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 20.398399] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 20.398434] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000e000
[ 20.398605] usb usb2: configuration #1 chosen from 1 choice
[ 20.398651] hub 2-0:1.0: USB hub found
[ 20.398666] hub 2-0:1.0: 2 ports detected
[ 20.439872] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 20.471480] SCSI subsystem initialized
[ 20.479029] libata version 2.21 loaded.
[ 20.502169] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 20.502193] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 20.502203] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 20.502260] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 20.502300] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e100
[ 20.502487] usb usb3: configuration #1 chosen from 1 choice
[ 20.502534] hub 3-0:1.0: USB hub found
[ 20.502545] hub 3-0:1.0: 2 ports detected
[ 20.526381] Floppy drive(s): fd0 is 1.44M
[ 20.555358] FDC 0 is a post-1991 82077
[ 20.605925] ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 16
[ 20.605941] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 20.605947] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 20.605992] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 20.606020] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e200
[ 20.606172] usb usb4: configuration #1 chosen from 1 choice
[ 20.606223] hub 4-0:1.0: USB hub found
[ 20.606234] hub 4-0:1.0: 2 ports detected
[ 20.709764] ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 18 (level, low) -> IRQ 18
[ 20.709780] uhci_hcd 0000:02:02.0: UHCI Host Controller
[ 20.709821] uhci_hcd 0000:02:02.0: new USB bus registered, assigned bus number 5
[ 20.709850] uhci_hcd 0000:02:02.0: irq 18, io base 0x0000d000
[ 20.710009] usb usb5: configuration #1 chosen from 1 choice
[ 20.710055] hub 5-0:1.0: USB hub found
[ 20.710065] hub 5-0:1.0: 2 ports detected
[ 20.710117] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 19
[ 20.710133] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 20.710139] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 20.813590] ACPI: PCI Interrupt 0000:02:02.1 -> GSI 19 (level, low) -> IRQ 17
[ 20.813607] uhci_hcd 0000:02:02.1: UHCI Host Controller
[ 20.813649] uhci_hcd 0000:02:02.1: new USB bus registered, assigned bus number 6
[ 20.813679] uhci_hcd 0000:02:02.1: irq 17, io base 0x0000d100
[ 20.813834] usb usb6: configuration #1 chosen from 1 choice
[ 20.813877] hub 6-0:1.0: USB hub found
[ 20.813889] hub 6-0:1.0: 2 ports detected
[ 20.917788] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
[ 20.917833] PCI: cache line size of 128 is not supported by device 0000:00:1d.7
[ 20.917848] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xf6100000
[ 20.921742] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 20.921957] usb usb7: configuration #1 chosen from 1 choice
[ 20.922023] hub 7-0:1.0: USB hub found
[ 20.922034] hub 7-0:1.0: 8 ports detected
[ 21.025250] ACPI: PCI Interrupt 0000:02:02.2[C] -> GSI 16 (level, low) -> IRQ 16
[ 21.025271] ehci_hcd 0000:02:02.2: EHCI Host Controller
[ 21.025316] ehci_hcd 0000:02:02.2: new USB bus registered, assigned bus number 8
[ 21.025364] ehci_hcd 0000:02:02.2: irq 16, io mem 0xf6043000
[ 21.053037] usb 5-1: new full speed USB device using uhci_hcd and address 2
[ 21.053042] ehci_hcd 0000:02:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 21.053181] usb usb8: configuration #1 chosen from 1 choice
[ 21.053228] hub 8-0:1.0: USB hub found
[ 21.053240] hub 8-0:1.0: 4 ports detected
[ 21.157181] 8139cp 0000:02:0b.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
[ 21.157189] 8139cp 0000:02:0b.0: Try the "8139too" driver instead.
[ 21.161421] 8139too Fast Ethernet driver 0.9.28
[ 21.161501] ACPI: PCI Interrupt 0000:02:0b.0[A] -> GSI 23 (level, low) -> IRQ 19
[ 21.161896] eth0: RealTek RTL8139 at 0xe083a000, 00:13:d3:99:54:ed, IRQ 19
[ 21.161902] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[ 21.162113] ata_piix 0000:00:1f.1: version 2.11
[ 21.162132] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
[ 21.162175] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 21.162303] scsi0 : ata_piix
[ 21.162428] scsi1 : ata_piix
[ 21.162627] ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001f000 irq 14
[ 21.162633] ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001f008 irq 15
[ 21.326339] ata1.00: ATA-7: Maxtor 6L300R0, BAJ41G20, max UDMA/133
[ 21.326344] ata1.00: 586114704 sectors, multi 16: LBA48
[ 21.342304] ata1.00: configured for UDMA/133
[ 21.660301] ata2.00: ATAPI: _FEC DVD_RW ND-"510A, 205, max UDMA/33
[ 21.739909] usb 8-1: new high speed USB device using ehci_hcd and address 2
[ 21.832015] ata2.00: configured for UDMA/33
[ 21.832160] scsi 0:0:0:0: Direct-Access ATA Maxtor 6L300R0 BAJ4 PQ: 0 ANSI: 5
[ 21.872626] usb 8-1: configuration #1 chosen from 1 choice
[ 21.884391] usbcore: registered new interface driver libusual
[ 21.893900] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 21.893908] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 21.896727] Initializing USB Mass Storage driver...
[ 21.896831] scsi2 : SCSI emulation for USB Mass Storage devices
[ 21.896910] usb-storage: device found at 2
[ 21.896914] usb-storage: waiting for device to settle before scanning
[ 21.896935] usbcore: registered new interface driver usb-storage
[ 21.896940] USB Mass Storage support registered.
[ 26.887558] usb-storage: device scan complete
[ 26.888300] scsi 2:0:0:0: CD-ROM _NEC DVD_RW ND-3520A 1.04 PQ: 0 ANSI: 0
[ 26.912623] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[ 26.912629] Uniform CD-ROM driver Revision: 3.20
[ 26.912705] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 26.916756] scsi 0:0:0:0: Attached scsi generic sg0 type 0
[ 26.916794] sr 2:0:0:0: Attached scsi generic sg1 type 5
[ 27.322771] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
[ 27.322781] ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x12 data 36 in
[ 27.322783] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 27.322796] ata2: soft resetting port
[ 27.642527] ata2.00: model number mismatch '_FEC DVD_RW ND-"510A' != '_FEC DVD_RW ND-2510A'
[ 27.642532] ata2.00: revalidation failed (errno=-19)
[ 27.642539] ata2.00: limiting speed to UDMA/33:PIO3
[ 27.642541] ata2: failed to recover some devices, retrying in 5 secs
[ 32.638043] ata2: soft resetting port
[ 32.957776] ata2.00: model number mismatch '_FEC DVD_RW ND-"510A' != '_EC DVD_RW ND-"510A'
[ 32.957781] ata2.00: revalidation failed (errno=-19)
[ 32.957786] ata2.00: disabled
[ 33.460695] ata2: soft resetting port
[ 33.780422] ata2.00: ATAPI: _FEC DVD_RW ND-"510A, 205, max UDMA/33
[ 33.952145] ata2.00: model number mismatch '_FEC DVD_RW ND-"510A' != '_EC DVD_RW ND-"510A'
[ 33.952150] ata2.00: revalidation failed (errno=-19)
[ 33.952156] ata2.00: limiting speed to UDMA/33:PIO3
[ 33.952159] ata2: failed to recover some devices, retrying in 5 secs
[ 38.947699] ata2: soft resetting port
[ 39.267439] ata2.00: model number mismatch '_FEC DVD_RW ND-"510A' != '_EC DVD_RW ND-"510A'
[ 39.267444] ata2.00: revalidation failed (errno=-19)
[ 39.267449] ata2.00: disabled
[ 39.770356] ata2: EH complete
[ 39.779621] sd 0:0:0:0: [sda] 586114704 512-byte hardware sectors (300091 MB)
[ 39.779646] sd 0:0:0:0: [sda] Write Protect is off
[ 39.779651] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 39.779684] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 39.779795] sd 0:0:0:0: [sda] 586114704 512-byte hardware sectors (300091 MB)
[ 39.779818] sd 0:0:0:0: [sda] Write Protect is off
[ 39.779823] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 39.779863] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 39.779874] sda: sda2
[ 39.830876] sd 0:0:0:0: [sda] Attached SCSI disk
[ 40.211453] Attempting manual resume
[ 40.211457] swsusp: Resume From Partition 8:6
[ 40.211459] PM: Checking swsusp image.
[ 40.211649] PM: Resume from disk failed.
[ 40.234696] kjournald starting. Commit interval 5 seconds
[ 40.234712] EXT3-fs: mounted filesystem with ordered data mode.
[ 43.293021] eth0: link down
[ 44.843197] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 44.845441] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 45.020768] intel_rng: FWH not detected
[ 45.054425] iTCO_vendor_support: vendor-support=0
[ 45.055940] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
[ 45.056043] iTCO_wdt: Found a ICH5 or ICH5R TCO device (Version=1, TCOBASE=0x0460)
[ 45.056102] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 45.231814] Linux agpgart interface v0.102 (c) Dave Jones
[ 45.235272] agpgart: Detected an Intel 865 Chipset.
[ 45.237857] agpgart: AGP aperture is 64M @ 0xf0000000
[ 45.393520] input: PC Speaker as /class/input/input2
[ 45.757736] nvidia: module license 'NVIDIA' taints kernel.
[ 46.010925] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 46.011226] NVRM: loading NVIDIA UNIX x86 Kernel Module 100.14.19 Wed Sep 12 14:12:24 PDT 2007
[ 46.102286] acx: Loaded combined PCI/USB driver, firmware_ver=default
[ 46.102292] acx: compiled to use 32bit I/O access. I/O timing issues might occur, such as non-working firmware upload. Report them
[ 46.102379] ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 19 (level, low) -> IRQ 17
[ 46.102401] acx: found ACX111-based wireless network card at 0000:02:03.0, irq:17, phymem1:0xF6040000, phymem2:0xF6000000, mem1:0xe09dc000, mem1_size:8192, mem2:0xe0ac0000, mem2_size:131072
[ 46.103408] acx: loading firmware for acx1111 chipset with radio ID 16
[ 46.339245] input: ImExPS/2 Logitech MX Mouse as /class/input/input3
[ 46.343121] parport_pc 00:09: reported by Plug and Play ACPI
[ 46.343195] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 46.891172] NVS_vendor_offs:01CD probe_delay:200 eof_memory:1114112
[ 46.891177] CCAModes:04 Diversity:01 ShortPreOpt:01 PBCC:01 ChanAgil:00 PHY:05 Temp:01
[ 46.891180] AntennaID:00 Len:02 Data:01 02
[ 46.891184] PowerLevelID:01 Len:02 Data:001E 000A
[ 46.891188] DataRatesID:02 Len:05 Data:02 04 11 22 44
[ 46.891194] DomainID:03 Len:06 Data:30 20 10 31 32 41
[ 46.891201] ProductID:04 Len:09 Data:TI ACX100
[ 46.891203] ManufacturerID:05 Len:07 Data:TI Test
[ 46.950566] acx: === chipset TNETW1130, radio type 0x16 (Radia), form factor 0x01 ((mini-)PCI / CardBus), EEPROM version 0x05: uploaded firmware 'Rev 1.2.1.34' ===
[ 46.950703] acx v0.3.36: net device wlan0, driver compiled against wireless extensions 22 and Linux 2.6.22-14-generic
[ 46.950798] ACPI: PCI Interrupt 0000:00:1f.5 -> GSI 17 (level, low) -> IRQ 20
[ 46.950831] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[ 46.950975] usbcore: registered new interface driver acx_usb
[ 47.274044] intel8x0_measure_ac97_clock: measured 54715 usecs
[ 47.274049] intel8x0: clocking to 48000
[ 48.072766] lp0: using parport0 (interrupt-driven).
[ 48.162728] Adding 1469844k swap on /dev/sda6. Priority:-1 extents:1 across:1469844k
[ 48.497405] EXT3 FS on sda9, internal journal
[ 49.298978] kjournald starting. Commit interval 5 seconds
[ 49.299221] EXT3 FS on sda7, internal journal
[ 49.299227] EXT3-fs: mounted filesystem with ordered data mode.
[ 49.559894] kjournald starting. Commit interval 5 seconds
[ 49.560071] EXT3 FS on sda8, internal journal
[ 49.560077] EXT3-fs: mounted filesystem with ordered data mode.
[ 53.275537] input: Power Button (FF) as /class/input/input4
[ 53.275565] ACPI: Power Button (FF) [PWRF]
[ 53.275629] input: Power Button (CM) as /class/input/input5
[ 53.275652] ACPI: Power Button (CM) [PWRB]
[ 53.331876] No dock devices found.
[ 55.102600] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[ 55.102607] apm: disabled - APM is not SMP safe.
[ 55.733765] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 55.849712] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 55.855044] NFSD: starting 90-second grace period
[ 56.031340] Failure registering capabilities with primary security module.
[ 58.261810] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
[ 58.261835] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
[ 58.261873] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
[ 58.923070] Bluetooth: Core ver 2.11
[ 58.923607] NET: Registered protocol family 31
[ 58.923614] Bluetooth: HCI device and connection manager initialized
[ 58.923620] Bluetooth: HCI socket layer initialized
[ 58.971129] Bluetooth: L2CAP ver 2.8
[ 58.971138] Bluetooth: L2CAP socket layer initialized
[ 59.074002] Bluetooth: RFCOMM socket layer initialized
[ 59.074023] Bluetooth: RFCOMM TTY layer initialized
[ 59.074027] Bluetooth: RFCOMM ver 1.8
[ 59.232448] ppdev: user-space parallel port driver
[ 59.386729] audit(1197577787.298:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=5824 profile="/usr/sbin/cupsd"
[ 62.351117] NET: Registered protocol family 17
[ 67.009880] UDF-fs: No VRS found
[ 1002.956698] NET: Registered protocol family 10
[ 1002.956861] lo: Disabled Privacy Extensions
[ 1002.957071] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 1003.975971] wlan0: duplicate address detected!
[ 1413.030768] usb 8-1: USB disconnect, address 2
[ 1413.273831] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274064] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274161] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274167] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274173] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274178] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274183] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274188] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274193] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274198] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274203] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274208] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274213] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274218] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274223] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274228] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274233] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274238] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274243] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274248] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274253] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274258] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274263] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274269] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274274] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274279] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274284] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274289] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274294] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274299] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274304] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274309] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274314] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274319] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274324] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274329] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274334] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274339] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274344] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274349] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274354] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274359] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274364] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274369] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274374] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274380] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274385] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274390] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274395] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274400] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274405] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274410] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274415] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274420] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274425] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274430] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274435] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274440] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274445] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274450] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274455] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274460] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274465] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274470] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274475] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274480] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274485] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274490] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274496] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274501] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274506] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274511] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274516] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274521] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274526] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274531] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274536] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274541] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274546] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274551] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274556] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274561] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274566] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274571] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274576] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274581] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274586] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274591] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274596] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274601] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274606] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274612] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274617] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274622] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274627] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274632] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274637] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274642] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274647] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274652] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274657] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274662] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274667] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274672] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274677] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274682] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274687] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274692] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274697] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274702] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274707] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274713] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274718] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274723] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274728] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274733] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274738] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274743] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274748] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274753] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274758] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274763] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274768] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274773] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274778] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274783] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274788] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274793] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274798] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274804] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274809] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274814] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274819] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274824] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274829] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274834] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274839] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274844] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274849] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274854] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274859] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274864] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274869] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274874] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274879] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274884] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274889] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274895] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274900] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274905] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274910] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274915] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274920] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274927] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274940] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274948] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274955] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274962] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274969] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274977] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274984] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274991] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274998] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.275006] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.275013] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.275018] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.275023] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.275029] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.275034] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.275040] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.275045] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.275050] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.275056] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.275061] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.275066] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.275072] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.275077] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.275082] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.275088] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.275093] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.275098] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.275104] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.275109] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.275114] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.275120] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.275125] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.275130] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.275137] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.275142] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.275147] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.275348] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.275364] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.275373] scsi 2:0:0:0: rejecting I/O to dead device
Re: [Install] masterizzatore interno non riconosciuto
comunque posto di seguito il risultato di "dmesg", magari può essere utile a capire qual'è il problema
Codice: Seleziona tutto
[ 18.379354] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 18.379535] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 18.380189] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 18.380492] 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 18.381398] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 18.381735] input: Macintosh mouse button emulation as /class/input/input0
[ 18.381842] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 18.384155] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 18.384164] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 18.384364] mice: PS/2 mouse device common for all mice
[ 18.384514] EISA: Probing bus 0 at eisa.0
[ 18.384554] EISA: Detected 0 cards.
[ 18.384659] TCP cubic registered
[ 18.384673] NET: Registered protocol family 1
[ 18.384697] Using IPI No-Shortcut mode
[ 18.384877] Magic number: 3:63:498
[ 18.385377] Freeing unused kernel memory: 364k freed
[ 18.410133] input: AT Translated Set 2 keyboard as /class/input/input1
[ 19.623856] AppArmor: AppArmor initialized<5>audit(1197577746.640:2): type=1505 info="AppArmor initialized" pid=1202
[ 19.630931] fuse init (API version 7.8 )
[ 19.636401] Failure registering capabilities with primary security module.
[ 19.671397] ACPI: Fan [FAN] (on)
[ 19.677725] ACPI: Thermal Zone [THRM] (35 C)
[ 20.295763] usbcore: registered new interface driver usbfs
[ 20.295818] usbcore: registered new interface driver hub
[ 20.295868] usbcore: registered new device driver usb
[ 20.297323] USB Universal Host Controller Interface driver v3.0
[ 20.297406] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 20.297422] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 20.297427] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 20.297601] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 20.297635] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000e300
[ 20.297818] usb usb1: configuration #1 chosen from 1 choice
[ 20.297873] hub 1-0:1.0: USB hub found
[ 20.297884] hub 1-0:1.0: 2 ports detected
[ 20.398323] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 17
[ 20.398344] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 20.398351] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 20.398399] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 20.398434] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000e000
[ 20.398605] usb usb2: configuration #1 chosen from 1 choice
[ 20.398651] hub 2-0:1.0: USB hub found
[ 20.398666] hub 2-0:1.0: 2 ports detected
[ 20.439872] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 20.471480] SCSI subsystem initialized
[ 20.479029] libata version 2.21 loaded.
[ 20.502169] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 20.502193] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 20.502203] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 20.502260] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 20.502300] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e100
[ 20.502487] usb usb3: configuration #1 chosen from 1 choice
[ 20.502534] hub 3-0:1.0: USB hub found
[ 20.502545] hub 3-0:1.0: 2 ports detected
[ 20.526381] Floppy drive(s): fd0 is 1.44M
[ 20.555358] FDC 0 is a post-1991 82077
[ 20.605925] ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 16
[ 20.605941] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 20.605947] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 20.605992] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 20.606020] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e200
[ 20.606172] usb usb4: configuration #1 chosen from 1 choice
[ 20.606223] hub 4-0:1.0: USB hub found
[ 20.606234] hub 4-0:1.0: 2 ports detected
[ 20.709764] ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 18 (level, low) -> IRQ 18
[ 20.709780] uhci_hcd 0000:02:02.0: UHCI Host Controller
[ 20.709821] uhci_hcd 0000:02:02.0: new USB bus registered, assigned bus number 5
[ 20.709850] uhci_hcd 0000:02:02.0: irq 18, io base 0x0000d000
[ 20.710009] usb usb5: configuration #1 chosen from 1 choice
[ 20.710055] hub 5-0:1.0: USB hub found
[ 20.710065] hub 5-0:1.0: 2 ports detected
[ 20.710117] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 19
[ 20.710133] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 20.710139] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 20.813590] ACPI: PCI Interrupt 0000:02:02.1[B] -> GSI 19 (level, low) -> IRQ 17
[ 20.813607] uhci_hcd 0000:02:02.1: UHCI Host Controller
[ 20.813649] uhci_hcd 0000:02:02.1: new USB bus registered, assigned bus number 6
[ 20.813679] uhci_hcd 0000:02:02.1: irq 17, io base 0x0000d100
[ 20.813834] usb usb6: configuration #1 chosen from 1 choice
[ 20.813877] hub 6-0:1.0: USB hub found
[ 20.813889] hub 6-0:1.0: 2 ports detected
[ 20.917788] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
[ 20.917833] PCI: cache line size of 128 is not supported by device 0000:00:1d.7
[ 20.917848] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xf6100000
[ 20.921742] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 20.921957] usb usb7: configuration #1 chosen from 1 choice
[ 20.922023] hub 7-0:1.0: USB hub found
[ 20.922034] hub 7-0:1.0: 8 ports detected
[ 21.025250] ACPI: PCI Interrupt 0000:02:02.2[C] -> GSI 16 (level, low) -> IRQ 16
[ 21.025271] ehci_hcd 0000:02:02.2: EHCI Host Controller
[ 21.025316] ehci_hcd 0000:02:02.2: new USB bus registered, assigned bus number 8
[ 21.025364] ehci_hcd 0000:02:02.2: irq 16, io mem 0xf6043000
[ 21.053037] usb 5-1: new full speed USB device using uhci_hcd and address 2
[ 21.053042] ehci_hcd 0000:02:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 21.053181] usb usb8: configuration #1 chosen from 1 choice
[ 21.053228] hub 8-0:1.0: USB hub found
[ 21.053240] hub 8-0:1.0: 4 ports detected
[ 21.157181] 8139cp 0000:02:0b.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
[ 21.157189] 8139cp 0000:02:0b.0: Try the "8139too" driver instead.
[ 21.161421] 8139too Fast Ethernet driver 0.9.28
[ 21.161501] ACPI: PCI Interrupt 0000:02:0b.0[A] -> GSI 23 (level, low) -> IRQ 19
[ 21.161896] eth0: RealTek RTL8139 at 0xe083a000, 00:13:d3:99:54:ed, IRQ 19
[ 21.161902] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[ 21.162113] ata_piix 0000:00:1f.1: version 2.11
[ 21.162132] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
[ 21.162175] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 21.162303] scsi0 : ata_piix
[ 21.162428] scsi1 : ata_piix
[ 21.162627] ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001f000 irq 14
[ 21.162633] ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001f008 irq 15
[ 21.326339] ata1.00: ATA-7: Maxtor 6L300R0, BAJ41G20, max UDMA/133
[ 21.326344] ata1.00: 586114704 sectors, multi 16: LBA48
[ 21.342304] ata1.00: configured for UDMA/133
[ 21.660301] ata2.00: ATAPI: _FEC DVD_RW ND-"510A, 205, max UDMA/33
[ 21.739909] usb 8-1: new high speed USB device using ehci_hcd and address 2
[ 21.832015] ata2.00: configured for UDMA/33
[ 21.832160] scsi 0:0:0:0: Direct-Access ATA Maxtor 6L300R0 BAJ4 PQ: 0 ANSI: 5
[ 21.872626] usb 8-1: configuration #1 chosen from 1 choice
[ 21.884391] usbcore: registered new interface driver libusual
[ 21.893900] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 21.893908] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 21.896727] Initializing USB Mass Storage driver...
[ 21.896831] scsi2 : SCSI emulation for USB Mass Storage devices
[ 21.896910] usb-storage: device found at 2
[ 21.896914] usb-storage: waiting for device to settle before scanning
[ 21.896935] usbcore: registered new interface driver usb-storage
[ 21.896940] USB Mass Storage support registered.
[ 26.887558] usb-storage: device scan complete
[ 26.888300] scsi 2:0:0:0: CD-ROM _NEC DVD_RW ND-3520A 1.04 PQ: 0 ANSI: 0
[ 26.912623] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[ 26.912629] Uniform CD-ROM driver Revision: 3.20
[ 26.912705] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 26.916756] scsi 0:0:0:0: Attached scsi generic sg0 type 0
[ 26.916794] sr 2:0:0:0: Attached scsi generic sg1 type 5
[ 27.322771] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
[ 27.322781] ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x12 data 36 in
[ 27.322783] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 27.322796] ata2: soft resetting port
[ 27.642527] ata2.00: model number mismatch '_FEC DVD_RW ND-"510A' != '_FEC DVD_RW ND-2510A'
[ 27.642532] ata2.00: revalidation failed (errno=-19)
[ 27.642539] ata2.00: limiting speed to UDMA/33:PIO3
[ 27.642541] ata2: failed to recover some devices, retrying in 5 secs
[ 32.638043] ata2: soft resetting port
[ 32.957776] ata2.00: model number mismatch '_FEC DVD_RW ND-"510A' != '_EC DVD_RW ND-"510A'
[ 32.957781] ata2.00: revalidation failed (errno=-19)
[ 32.957786] ata2.00: disabled
[ 33.460695] ata2: soft resetting port
[ 33.780422] ata2.00: ATAPI: _FEC DVD_RW ND-"510A, 205, max UDMA/33
[ 33.952145] ata2.00: model number mismatch '_FEC DVD_RW ND-"510A' != '_EC DVD_RW ND-"510A'
[ 33.952150] ata2.00: revalidation failed (errno=-19)
[ 33.952156] ata2.00: limiting speed to UDMA/33:PIO3
[ 33.952159] ata2: failed to recover some devices, retrying in 5 secs
[ 38.947699] ata2: soft resetting port
[ 39.267439] ata2.00: model number mismatch '_FEC DVD_RW ND-"510A' != '_EC DVD_RW ND-"510A'
[ 39.267444] ata2.00: revalidation failed (errno=-19)
[ 39.267449] ata2.00: disabled
[ 39.770356] ata2: EH complete
[ 39.779621] sd 0:0:0:0: [sda] 586114704 512-byte hardware sectors (300091 MB)
[ 39.779646] sd 0:0:0:0: [sda] Write Protect is off
[ 39.779651] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 39.779684] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 39.779795] sd 0:0:0:0: [sda] 586114704 512-byte hardware sectors (300091 MB)
[ 39.779818] sd 0:0:0:0: [sda] Write Protect is off
[ 39.779823] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 39.779863] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 39.779874] sda: sda2 < sda5 sda6 sda7 sda8 sda9 >
[ 39.830876] sd 0:0:0:0: [sda] Attached SCSI disk
[ 40.211453] Attempting manual resume
[ 40.211457] swsusp: Resume From Partition 8:6
[ 40.211459] PM: Checking swsusp image.
[ 40.211649] PM: Resume from disk failed.
[ 40.234696] kjournald starting. Commit interval 5 seconds
[ 40.234712] EXT3-fs: mounted filesystem with ordered data mode.
[ 43.293021] eth0: link down
[ 44.843197] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 44.845441] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 45.020768] intel_rng: FWH not detected
[ 45.054425] iTCO_vendor_support: vendor-support=0
[ 45.055940] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
[ 45.056043] iTCO_wdt: Found a ICH5 or ICH5R TCO device (Version=1, TCOBASE=0x0460)
[ 45.056102] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 45.231814] Linux agpgart interface v0.102 (c) Dave Jones
[ 45.235272] agpgart: Detected an Intel 865 Chipset.
[ 45.237857] agpgart: AGP aperture is 64M @ 0xf0000000
[ 45.393520] input: PC Speaker as /class/input/input2
[ 45.757736] nvidia: module license 'NVIDIA' taints kernel.
[ 46.010925] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 46.011226] NVRM: loading NVIDIA UNIX x86 Kernel Module 100.14.19 Wed Sep 12 14:12:24 PDT 2007
[ 46.102286] acx: Loaded combined PCI/USB driver, firmware_ver=default
[ 46.102292] acx: compiled to use 32bit I/O access. I/O timing issues might occur, such as non-working firmware upload. Report them
[ 46.102379] ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 19 (level, low) -> IRQ 17
[ 46.102401] acx: found ACX111-based wireless network card at 0000:02:03.0, irq:17, phymem1:0xF6040000, phymem2:0xF6000000, mem1:0xe09dc000, mem1_size:8192, mem2:0xe0ac0000, mem2_size:131072
[ 46.103408] acx: loading firmware for acx1111 chipset with radio ID 16
[ 46.339245] input: ImExPS/2 Logitech MX Mouse as /class/input/input3
[ 46.343121] parport_pc 00:09: reported by Plug and Play ACPI
[ 46.343195] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 46.891172] NVS_vendor_offs:01CD probe_delay:200 eof_memory:1114112
[ 46.891177] CCAModes:04 Diversity:01 ShortPreOpt:01 PBCC:01 ChanAgil:00 PHY:05 Temp:01
[ 46.891180] AntennaID:00 Len:02 Data:01 02
[ 46.891184] PowerLevelID:01 Len:02 Data:001E 000A
[ 46.891188] DataRatesID:02 Len:05 Data:02 04 11 22 44
[ 46.891194] DomainID:03 Len:06 Data:30 20 10 31 32 41
[ 46.891201] ProductID:04 Len:09 Data:TI ACX100
[ 46.891203] ManufacturerID:05 Len:07 Data:TI Test
[ 46.950566] acx: === chipset TNETW1130, radio type 0x16 (Radia), form factor 0x01 ((mini-)PCI / CardBus), EEPROM version 0x05: uploaded firmware 'Rev 1.2.1.34' ===
[ 46.950703] acx v0.3.36: net device wlan0, driver compiled against wireless extensions 22 and Linux 2.6.22-14-generic
[ 46.950798] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 20
[ 46.950831] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[ 46.950975] usbcore: registered new interface driver acx_usb
[ 47.274044] intel8x0_measure_ac97_clock: measured 54715 usecs
[ 47.274049] intel8x0: clocking to 48000
[ 48.072766] lp0: using parport0 (interrupt-driven).
[ 48.162728] Adding 1469844k swap on /dev/sda6. Priority:-1 extents:1 across:1469844k
[ 48.497405] EXT3 FS on sda9, internal journal
[ 49.298978] kjournald starting. Commit interval 5 seconds
[ 49.299221] EXT3 FS on sda7, internal journal
[ 49.299227] EXT3-fs: mounted filesystem with ordered data mode.
[ 49.559894] kjournald starting. Commit interval 5 seconds
[ 49.560071] EXT3 FS on sda8, internal journal
[ 49.560077] EXT3-fs: mounted filesystem with ordered data mode.
[ 53.275537] input: Power Button (FF) as /class/input/input4
[ 53.275565] ACPI: Power Button (FF) [PWRF]
[ 53.275629] input: Power Button (CM) as /class/input/input5
[ 53.275652] ACPI: Power Button (CM) [PWRB]
[ 53.331876] No dock devices found.
[ 55.102600] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[ 55.102607] apm: disabled - APM is not SMP safe.
[ 55.733765] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 55.849712] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 55.855044] NFSD: starting 90-second grace period
[ 56.031340] Failure registering capabilities with primary security module.
[ 58.261810] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
[ 58.261835] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
[ 58.261873] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
[ 58.923070] Bluetooth: Core ver 2.11
[ 58.923607] NET: Registered protocol family 31
[ 58.923614] Bluetooth: HCI device and connection manager initialized
[ 58.923620] Bluetooth: HCI socket layer initialized
[ 58.971129] Bluetooth: L2CAP ver 2.8
[ 58.971138] Bluetooth: L2CAP socket layer initialized
[ 59.074002] Bluetooth: RFCOMM socket layer initialized
[ 59.074023] Bluetooth: RFCOMM TTY layer initialized
[ 59.074027] Bluetooth: RFCOMM ver 1.8
[ 59.232448] ppdev: user-space parallel port driver
[ 59.386729] audit(1197577787.298:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=5824 profile="/usr/sbin/cupsd"
[ 62.351117] NET: Registered protocol family 17
[ 67.009880] UDF-fs: No VRS found
[ 1002.956698] NET: Registered protocol family 10
[ 1002.956861] lo: Disabled Privacy Extensions
[ 1002.957071] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 1003.975971] wlan0: duplicate address detected!
[ 1413.030768] usb 8-1: USB disconnect, address 2
[ 1413.273831] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274064] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274161] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274167] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274173] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274178] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274183] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274188] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274193] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274198] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274203] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274208] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274213] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274218] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274223] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274228] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274233] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274238] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274243] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274248] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274253] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274258] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274263] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274269] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274274] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274279] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274284] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274289] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274294] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274299] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274304] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274309] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274314] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274319] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274324] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274329] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274334] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274339] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274344] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274349] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274354] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274359] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274364] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274369] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274374] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274380] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274385] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274390] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274395] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274400] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274405] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274410] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274415] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274420] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274425] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274430] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274435] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274440] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274445] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274450] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274455] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274460] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274465] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274470] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274475] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274480] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274485] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274490] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274496] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274501] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274506] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274511] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274516] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274521] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274526] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274531] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274536] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274541] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274546] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274551] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274556] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274561] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274566] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274571] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274576] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274581] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274586] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274591] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274596] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274601] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274606] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274612] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274617] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274622] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274627] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274632] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274637] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274642] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274647] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274652] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274657] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274662] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274667] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274672] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274677] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274682] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274687] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274692] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274697] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274702] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274707] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274713] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274718] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274723] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274728] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274733] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274738] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274743] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274748] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274753] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274758] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274763] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274768] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274773] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274778] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274783] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274788] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274793] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274798] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274804] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274809] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274814] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274819] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274824] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274829] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274834] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274839] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274844] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274849] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274854] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274859] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274864] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274869] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274874] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274879] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274884] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274889] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274895] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274900] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274905] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274910] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274915] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274920] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274927] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274940] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274948] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274955] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274962] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274969] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274977] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274984] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274991] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.274998] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.275006] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.275013] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.275018] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.275023] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.275029] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.275034] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.275040] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.275045] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.275050] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.275056] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.275061] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.275066] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.275072] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.275077] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.275082] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.275088] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.275093] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.275098] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.275104] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.275109] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.275114] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.275120] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.275125] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.275130] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.275137] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.275142] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.275147] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.275348] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.275364] scsi 2:0:0:0: rejecting I/O to dead device
[ 1413.275373] scsi 2:0:0:0: rejecting I/O to dead device
Ultima modifica di Kalel il giovedì 13 dicembre 2007, 22:37, modificato 1 volta in totale.
Re: [Install] masterizzatore interno non riconosciuto
non so proprio come aiutarti...Re: [Risolto] masterizzatore interno non riconosciuto
ho risolto il problema...si trattava di un problema hardware, in pratica il lettore dvd era settato come Master ed andava in conflitto con il masterizzatore...ora vengono rilevati ma comunque i dvd inseriti nel lettore non vengono montati >:(
Chi c’è in linea
Visualizzano questa sezione: 0 utenti iscritti e 10 ospiti