[Install] 3Com U.S. Robotics & Hylafax

[frankies261]

Salve a tutti,

da tempo sto cercando di configurare un modem seriale della 3Com U.S. Robotics su di un AMD 64,
Questo modem è collegato sulla COM1 (ttyS0) ed utilizzando i programmi come "minicom -s" e "faxaddmodem" non riesco a configurarlo.
Allora, utilizzando il comando "faxaddmodem" questo è il risultato:

root@francesco-ubuntu:/home/francesco# faxaddmodem
Serial port that modem is connected to [ttyS0]?
Hmm, there does not appear to be an fuser command on your machine.
This means that I am unable to ensure that all processes using the
modem have been killed.  I will keep going, but beware that you may
have competition for the modem.

Ok, time to setup a configuration file for the modem.  The manual
page config(5) may be useful during this process.  Also be aware
that at any time you can safely interrupt this procedure.

Reading scheduler config file /var/spool/hylafax/etc/config.

No existing configuration, let's do this from scratch.

Country code [1]? 39
Area code [415]? 099
Phone number of fax modem [+1.999.555.1212]? 0995338217
Local identification string (for TSI/CIG) ["NothingSetup"]?
Long distance dialing prefix [1]?
International dialing prefix [011]?
Dial string rules file (relative to /var/spool/hylafax) [etc/dialrules]?
Tracing during normal server operation [1]?
Tracing during send and receive sessions [11]?
Protection mode for received facsimile [0600]?
Protection mode for session logs [0600]?
Protection mode for ttyS0 [0600]?
Rings to wait before answering [1]?
Modem speaker volume [off]?
Command line arguments to getty program ["-h %l dx_%s"]?
Pathname of TSI access control list file (relative to /var/spool/hylafax) [""]?
Pathname of Caller-ID access control list file (relative to /var/spool/hylafax) [""]?
Tag line font file (relative to /var/spool/hylafax) [etc/lutRS18.pcf]?
Tag line format string ["From %%l|%c|Page %%P of %%T"]?
Time before purging a stale UUCP lock file (secs) [30]?
Hold UUCP lockfile during inbound data calls [Yes]?
Hold UUCP lockfile during inbound voice calls [Yes]?
Percent good lines to accept during copy quality checking [95]?
Max consecutive bad lines to accept during copy quality checking [5]?
Max number of pages to accept in a received facsimile [25]?
Syslog facility name for ServerTracing messages [daemon]?
Set UID to 0 to manipulate CLOCAL [""]?
Use available priority job scheduling mechanism [""]?

Your facsimile phone number (0995338217) does not agree with your
country code (39) or area code (099).  The number
should be a fully qualified international dialing number of the form:

    +39 099

Spaces, hyphens, and periods can be included for legibility.  For example,

    +39.099.555.1212

is a possible phone number (using your country and area codes).

The non-default server configuration parameters are:

CountryCode:            39
AreaCode:              099
FAXNumber:              0995338217
LongDistancePrefix:    1
InternationalPrefix:    011
DialStringRules:        etc/dialrules
SessionTracing:        11
RingsBeforeAnswer:      1
SpeakerVolume:          off
GettyArgs:              "-h %l dx_%s"
LocalIdentifier:        "NothingSetup"
TagLineFont:            etc/lutRS18.pcf
TagLineFormat:          "From %%l|%c|Page %%P of %%T"
MaxRecvPages:          25

Are these ok [yes]?

Now we are going to probe the tty port to figure out the type
of modem that is attached.  This takes a few seconds, so be patient.
Note that if you do not have the modem cabled to the port, or the
modem is turned off, this may hang (just go and cable up the modem
or turn it on, or whatever).

Probing for best speed to talk to modem: 38400 19200 9600 4800 2400 1200
Unable to deduce DTE-DCE speed; check that you are using the
correct device and/or that your modem is setup properly.  If
all else fails, try the -s option to lock the speed.


Inizia ad effettuare un controllo sulla velocità di trasmissione del modem, i led dello stesso lampeggiano in modo affannato, ed alla fine non mi completa la configurazione.


Quindi chiedo gentilmente a qualche anima buona che mi dia una mano a configurare questo modem perché è da 1 mese che ci sto provando ma nulla da fare.

Grazie

Francesco

[psqcld]

Tentar non nuoce, in questo mio post, utilizzando Puppy-Linux, suggerisco ciò che a me ha risolto  (yes)
http://forum.ubuntu-it.org/viewtopic.ph ... 4#p1025404