[Risolto] [Internet] All'accensione il modem usb non ha linea adsl,poi riavviand

colibri81

salve,
la mia situazione e' un po' strana. Dunque ho il pc in dual boot xp/ubuntu. Leggendo qualche pagina internet sono riuscito ad installare senza problemi il mio modem usb michelangelo usb cx della digicom, con modalita' access runner.

Una volta riacceso il pc ubuntu non si connetteva, e osservando ho visto che il modem non aveva il led della linea adsl acceso ma era comunque acceso il led power, ho riavviato con xp e il led adsl si accende, fatto cio' ho riavviato facendo partire ubuntu e si connette tranquillamente.

Per la precisione se io spengo il pc ma non il gruppo di continuita' il led resta acceso,e se lo riaccendo ubuntu si collega.

Spero di essere stato chiaro. Aiutatemi per favore perche' questa cosa e' una vera scocciatura, significa che non posso fare a meno di windows in un futuro.

Grazie attendo vostre notizie
colibri

mistermax80

Prova prima ad avviare il pc col modem staccato, poi dopo averlo riavviato attacchi il modem e ci posti questo comando dato da terminale:

Codice: Seleziona tutto

dmesg

colibri81

grazie per la risposta...

scusami ti interessa la risposta dal terminale a model staccato o attaccato?

mistermax80

Mi interessa la risposta dopo che lo hai attaccato e poi dai quel comando...

colibri81

fatto eccoti le risposte...

questa e' la risposta quando l'ho riattaccato e funziona ma non ha linea adsl:
[ 0.000000] Linux version 2.6.22-14-generic (buildd@terranova) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Tue Dec 18 08:02:57 UTC 2007 (Ubuntu 2.6.22-14.47-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000002fff0000 (usable)
[ 0.000000] BIOS-e820: 000000002fff0000 - 000000002fff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000002fff3000 - 0000000030000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 767MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f62d0
[ 0.000000] Entering add_active_range(0, 0, 196592) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 196592
[ 0.000000] HighMem 196592 -> 196592
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 196592
[ 0.000000] On node 0 totalpages: 196592
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1503 pages used for memmap
[ 0.000000] Normal zone: 190993 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] DMI 2.2 present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F7C80 checksum 0
[ 0.000000] ACPI: RSDP 000F7C80, 0014 (r0 AWARD )
[ 0.000000] ACPI: RSDT 2FFF3000, 002C (r1 AWARD AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: FACP 2FFF3040, 0074 (r1 AWARD AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: DSDT 2FFF30C0, 3C46 (r1 AWARD AWRDACPI 1000 MSFT 100000C)
[ 0.000000] ACPI: FACS 2FFF0000, 0040
[ 0.000000] ACPI: APIC 2FFF6D40, 0054 (r1 AWARD AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: PM-Timer IO Port: 0x5008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:7 APIC version 16
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 30000000:cec00000)
[ 0.000000] Built 1 zonelists. Total pages: 195057
[ 0.000000] Kernel command line: root=UUID=9ede78cc-df54-4e30-b9a3-ea3d0b55ad90 ro quiet splash locale=it_IT
[ 0.000000] mapped APIC to ffffd000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffc000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 995.814 MHz processor.
[ 13.559385] Console: colour VGA+ 80x25
[ 13.561021] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 13.563862] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 13.606649] Memory: 767884k/786368k available (2015k kernel code, 17864k reserved, 916k data, 364k init, 0k highmem)
[ 13.606670] virtual kernel memory layout:
[ 13.606672] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB)
[ 13.606675] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 13.606677] vmalloc : 0xf0800000 - 0xff7fe000 ( 239 MB)
[ 13.606680] lowmem : 0xc0000000 - 0xefff0000 ( 767 MB)
[ 13.606682] .init : 0xc03e3000 - 0xc043e000 ( 364 kB)
[ 13.606685] .data : 0xc02f7de6 - 0xc03dce84 ( 916 kB)
[ 13.606688] .text : 0xc0100000 - 0xc02f7de6 (2015 kB)
[ 13.606695] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 13.606778] SLUB: Genslabs=22, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[ 13.686781] Calibrating delay using timer specific routine.. 1992.89 BogoMIPS (lpj=3985784)
[ 13.686840] Security Framework v1.0.0 initialized
[ 13.686853] SELinux: Disabled at boot.
[ 13.686884] Mount-cache hash table entries: 512
[ 13.687144] CPU: After generic identify, caps: 0383fbff c1c7fbff 00000000 00000000 00000000 00000000 00000000
[ 13.687164] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 13.687169] CPU: L2 Cache: 64K (64 bytes/line)
[ 13.687175] CPU: After all inits, caps: 0383fbff c1c7fbff 00000000 00000420 00000000 00000000 00000000
[ 13.687198] Compat vDSO mapped to ffffe000.
[ 13.687223] Checking 'hlt' instruction... OK.
[ 13.703040] SMP alternatives: switching to UP code
[ 13.703613] Freeing SMP alternatives: 11k freed
[ 13.704325] Early unpacking initramfs... done
[ 14.330414] ACPI: Core revision 20070126
[ 14.330586] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 14.388795] CPU0: AMD Duron(tm) processor stepping 00
[ 14.388835] Total of 1 processors activated (1992.89 BogoMIPS).
[ 14.388950] ENABLING IO-APIC IRQs
[ 14.389161] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 14.534648] Brought up 1 CPUs
[ 14.534926] Booting paravirtualized kernel on bare hardware
[ 14.535034] Time: 14:15:25 Date: 00/17/108
[ 14.535100] NET: Registered protocol family 16
[ 14.535351] EISA bus registered
[ 14.535373] ACPI: bus type pci registered
[ 14.535730] PCI: PCI BIOS revision 2.10 entry at 0xfb3e0, last bus=1
[ 14.535736] PCI: Using configuration type 1
[ 14.535739] Setting up standard PCI resources
[ 14.539085] ACPI: EC: Look up EC in DSDT
[ 14.545320] ACPI: Interpreter enabled
[ 14.545332] ACPI: (supports S0 S1 S4 S5)
[ 14.545363] ACPI: Using IOAPIC for interrupt routing
[ 14.558145] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 14.558160] PCI: Probing PCI hardware (bus 00)
[ 14.558430] Enabling SiS 96x SMBus.
[ 14.559376] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 14.603490] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 14.603689] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15) *9
[ 14.603869] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 14.604046] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 14.604223] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 14.604401] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 14.604579] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 14.604758] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 14.605036] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 14.605078] pnp: PnP ACPI init
[ 14.605106] ACPI: bus type pnp registered
[ 14.613138] pnp: PnP ACPI: found 15 devices
[ 14.613147] ACPI: ACPI bus type pnp unregistered
[ 14.613156] PnPBIOS: Disabled by ACPI PNP
[ 14.613284] PCI: Using ACPI for IRQ routing
[ 14.613292] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 14.622377] NET: Registered protocol family 8
[ 14.622382] NET: Registered protocol family 20
[ 14.622540] Time: tsc clocksource has been installed.
[ 14.622627] pnp: 00:00: iomem range 0xcb000-0xcbfff has been reserved
[ 14.622634] pnp: 00:00: iomem range 0xf0000-0xf7fff could not be reserved
[ 14.622640] pnp: 00:00: iomem range 0xf8000-0xfbfff could not be reserved
[ 14.622646] pnp: 00:00: iomem range 0xfc000-0xfffff could not be reserved
[ 14.653386] PCI: Bridge: 0000:00:01.0
[ 14.653394] IO window: 9000-9fff
[ 14.653403] MEM window: ec000000-edffffff
[ 14.653410] PREFETCH window: e0000000-e7ffffff
[ 14.653458] NET: Registered protocol family 2
[ 14.690640] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 14.691083] TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
[ 14.696723] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 14.698703] TCP: Hash tables configured (established 131072 bind 65536)
[ 14.698711] TCP reno registered
[ 14.710830] checking if image is initramfs...Switched to high resolution mode on CPU 0
[ 15.249491] it is
[ 15.899814] Freeing initrd memory: 7047k freed
[ 15.900733] audit: initializing netlink socket (disabled)
[ 15.900765] audit(1200579325.860:1): initialized
[ 15.905331] VFS: Disk quotas dquot_6.5.1
[ 15.905461] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 15.905716] io scheduler noop registered
[ 15.905721] io scheduler anticipatory registered
[ 15.905726] io scheduler deadline registered
[ 15.905771] io scheduler cfq registered (default)
[ 15.905870] Boot video device is 0000:01:00.0
[ 15.906339] isapnp: Scanning for PnP cards...
[ 16.259725] isapnp: No Plug & Play device found
[ 16.377490] Real Time Clock Driver v1.12ac
[ 16.377686] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 16.377825] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 16.378589] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 16.380569] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 16.381404] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 16.383554] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 16.384071] input: Macintosh mouse button emulation as /class/input/input0
[ 16.384268] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 16.384618] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 16.384629] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 16.385045] mice: PS/2 mouse device common for all mice
[ 16.385329] EISA: Probing bus 0 at eisa.0
[ 16.385359] Cannot allocate resource for EISA slot 4
[ 16.385363] Cannot allocate resource for EISA slot 5
[ 16.385381] EISA: Detected 0 cards.
[ 16.385593] TCP cubic registered
[ 16.385612] NET: Registered protocol family 1
[ 16.385655] Using IPI No-Shortcut mode
[ 16.386134] Magic number: 8:449:283
[ 16.386217] hash matches device ttyve
[ 16.387514] Freeing unused kernel memory: 364k freed
[ 16.450015] input: AT Translated Set 2 keyboard as /class/input/input1
[ 17.934375] AppArmor: AppArmor initializedaudit(1200579327.860:2): type=1505 info="AppArmor initialized" pid=1194
[ 17.949654] fuse init (API version 7.

[ 17.961691] Failure registering capabilities with primary security module.
[ 17.983218] ACPI: Fan [FAN] (on)
[ 17.996993] ACPI: Thermal Zone [THRM] (40 C)
[ 19.565843] usbcore: registered new interface driver usbfs
[ 19.565911] usbcore: registered new interface driver hub
[ 19.565964] usbcore: registered new device driver usb
[ 19.567755] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 19.567838] ACPI: PCI Interrupt 0000:00:02.2[D] -> GSI 19 (level, low) -> IRQ 16
[ 19.567863] ohci_hcd 0000:00:02.2: OHCI Host Controller
[ 19.568237] ohci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
[ 19.568280] ohci_hcd 0000:00:02.2: irq 16, io mem 0xee011000
[ 19.621082] SCSI subsystem initialized
[ 19.631688] libata version 2.21 loaded.
[ 19.659877] usb usb1: configuration #1 chosen from 1 choice
[ 19.659942] hub 1-0:1.0: USB hub found
[ 19.659966] hub 1-0:1.0: 3 ports detected
[ 19.761053] ACPI: PCI Interrupt 0000:00:02.3[A] -> GSI 23 (level, low) -> IRQ 17
[ 19.761084] ohci_hcd 0000:00:02.3: OHCI Host Controller
[ 19.761141] ohci_hcd 0000:00:02.3: new USB bus registered, assigned bus number 2
[ 19.761177] ohci_hcd 0000:00:02.3: irq 17, io mem 0xee010000
[ 19.810910] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 19.819038] usb usb2: configuration #1 chosen from 1 choice
[ 19.819101] hub 2-0:1.0: USB hub found
[ 19.819125] hub 2-0:1.0: 3 ports detected
[ 19.824888] USB Universal Host Controller Interface driver v3.0
[ 19.922216] pata_sis 0000:00:02.5: version 0.5.1
[ 19.922666] scsi0 : pata_sis
[ 19.922800] scsi1 : pata_sis
[ 19.923074] ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00014000 irq 14
[ 19.923081] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x00014008 irq 15
[ 20.050244] Floppy drive(s): fd0 is 1.44M
[ 20.093068] ata1.00: ATA-5: QUANTUM FIREBALLP AS20.5, A1Y.1500, max UDMA/100
[ 20.093080] ata1.00: 40132503 sectors, multi 16: LBA
[ 20.093221] ata1.01: ATA-7: Maxtor 6E040L0, NAR61590, max UDMA/133
[ 20.093227] ata1.01: 80293248 sectors, multi 16: LBA
[ 20.109112] ata1.00: configured for UDMA/100
[ 20.121545] FDC 0 is a post-1991 82077
[ 20.124961] ata1.01: configured for UDMA/100
[ 20.608638] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-4163B, A101, max UDMA/33
[ 20.608654] ata2.01: ATAPI: LG CD-ROM CRD-8521B, 1.03, max MWDMA2
[ 20.780579] ata2.00: configured for UDMA/33
[ 20.944530] ata2.01: configured for PIO4
[ 20.944819] scsi 0:0:0:0: Direct-Access ATA QUANTUM FIREBALL A1Y. PQ: 0 ANSI: 5
[ 20.946126] scsi 0:0:1:0: Direct-Access ATA Maxtor 6E040L0 NAR6 PQ: 0 ANSI: 5
[ 20.951883] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-4163B A101 PQ: 0 ANSI: 5
[ 20.953480] scsi 1:0:1:0: CD-ROM LG CD-ROM CRD-8521B 1.03 PQ: 0 ANSI: 5
[ 20.962186] 8139cp 0000:00:0d.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
[ 20.962198] 8139cp 0000:00:0d.0: Try the "8139too" driver instead.
[ 20.966399] 8139too Fast Ethernet driver 0.9.28
[ 20.967621] ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 19 (level, low) -> IRQ 16
[ 20.968779] eth0: RealTek RTL8139 at 0xf084c000, 00:30:4f:15:6e:95, IRQ 16
[ 20.968789] eth0: Identified 8139 chip type 'RTL-8139C'
[ 20.969911] ACPI: PCI Interrupt 0000:00:0e.0[A] -> GSI 16 (level, low) -> IRQ 18
[ 20.969943] uhci_hcd 0000:00:0e.0: UHCI Host Controller
[ 20.970569] uhci_hcd 0000:00:0e.0: new USB bus registered, assigned bus number 3
[ 20.970624] uhci_hcd 0000:00:0e.0: irq 18, io base 0x0000c000
[ 20.971933] usb usb3: configuration #1 chosen from 1 choice
[ 20.972584] hub 3-0:1.0: USB hub found
[ 20.972614] hub 3-0:1.0: 2 ports detected
[ 21.021214] sd 0:0:0:0: [sda] 40132503 512-byte hardware sectors (20548 MB)
[ 21.021308] sd 0:0:0:0: [sda] Write Protect is off
[ 21.021314] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 21.021356] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 21.021518] sd 0:0:0:0: [sda] 40132503 512-byte hardware sectors (20548 MB)
[ 21.021541] sd 0:0:0:0: [sda] Write Protect is off
[ 21.021547] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 21.021583] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 21.021597] sda: sda1 sda2 sda3
[ 21.076595] ACPI: PCI Interrupt 0000:00:0e.1 -> GSI 17 (level, low) -> IRQ 19
[ 21.076622] uhci_hcd 0000:00:0e.1: UHCI Host Controller
[ 21.076690] uhci_hcd 0000:00:0e.1: new USB bus registered, assigned bus number 4
[ 21.076735] uhci_hcd 0000:00:0e.1: irq 19, io base 0x0000c400
[ 21.077004] usb usb4: configuration #1 chosen from 1 choice
[ 21.077069] hub 4-0:1.0: USB hub found
[ 21.077092] hub 4-0:1.0: 2 ports detected
[ 21.081954] sd 0:0:0:0: [sda] Attached SCSI disk
[ 21.082671] sd 0:0:1:0: [sdb] 80293248 512-byte hardware sectors (41110 MB)
[ 21.082706] sd 0:0:1:0: [sdb] Write Protect is off
[ 21.082711] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 21.082752] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 21.082899] sd 0:0:1:0: [sdb] 80293248 512-byte hardware sectors (41110 MB)
[ 21.082923] sd 0:0:1:0: [sdb] Write Protect is off
[ 21.082928] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 21.082963] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 21.082970] sdb:ACPI: PCI Interrupt 0000:00:0e.2[C] -> GSI 18 (level, low) -> IRQ 20
[ 21.180829] ehci_hcd 0000:00:0e.2: EHCI Host Controller
[ 21.180917] ehci_hcd 0000:00:0e.2: new USB bus registered, assigned bus number 5
[ 21.181012] ehci_hcd 0000:00:0e.2: irq 20, io mem 0xee013000
[ 21.181022] ehci_hcd 0000:00:0e.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 21.181261] usb usb5: configuration #1 chosen from 1 choice
[ 21.181354] hub 5-0:1.0: USB hub found
[ 21.181375] hub 5-0:1.0: 4 ports detected
[ 21.828046] usb 5-2: new high speed USB device using ehci_hcd and address 2
[ 21.852824] [LDM] sdb1
[ 21.854388] sd 0:0:1:0: [sdb] Attached SCSI disk
[ 21.866247] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 21.866846] sd 0:0:1:0: Attached scsi generic sg1 type 0
[ 21.867420] sr 1:0:0:0: Attached scsi generic sg2 type 5
[ 21.868017] scsi 1:0:1:0: Attached scsi generic sg3 type 5
[ 21.933829] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[ 21.933843] Uniform CD-ROM driver Revision: 3.20
[ 21.933981] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 21.938157] sr1: scsi3-mmc drive: 0x/52x cd/rw xa/form2 cdda tray
[ 21.938318] sr 1:0:1:0: Attached scsi CD-ROM sr1
[ 21.961486] usb 5-2: configuration #1 chosen from 1 choice
[ 21.961808] hub 5-2:1.0: USB hub found
[ 21.962135] hub 5-2:1.0: 4 ports detected
[ 22.520343] Attempting manual resume
[ 22.520353] swsusp: Resume From Partition 8:3
[ 22.520356] PM: Checking swsusp image.
[ 22.520794] PM: Resume from disk failed.
[ 22.581936] kjournald starting. Commit interval 5 seconds
[ 22.581982] EXT3-fs: mounted filesystem with ordered data mode.
[ 22.783704] usb 4-1: new full speed USB device using uhci_hcd and address 2
[ 22.981735] usb 4-1: configuration #1 chosen from 1 choice
[ 23.223545] usb 4-2: new full speed USB device using uhci_hcd and address 3
[ 23.435659] usb 4-2: configuration #1 chosen from 1 choice
[ 23.639695] usb 5-2.2: new full speed USB device using ehci_hcd and address 5
[ 23.733143] usb 5-2.2: configuration #1 chosen from 1 choice
[ 23.733362] hub 5-2.2:1.0: USB hub found
[ 23.733536] hub 5-2.2:1.0: 3 ports detected
[ 24.035412] usb 5-2.2.1: new full speed USB device using ehci_hcd and address 6
[ 24.131520] usb 5-2.2.1: configuration #1 chosen from 1 choice
[ 34.485546] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 34.496707] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 34.526454] Linux agpgart interface v0.102 (c) Dave Jones
[ 34.557598] agpgart: Detected SiS chipset - id:1861
[ 34.563747] agpgart: AGP aperture is 64M @ 0xe8000000
[ 34.622502] sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x5080
[ 34.623807] sis630_smbus 0000:00:02.0: SIS630 comp. bus not detected, module not inserted.
[ 36.017745] gameport: EMU10K1 is pci0000:00:0b.1/gameport0, io 0xb400, speed 685kHz
[ 36.750095] ACPI: PCI Interrupt 0000:00:02.7[C] -> GSI 18 (level, low) -> IRQ 20
[ 37.070626] intel8x0_measure_ac97_clock: measured 54825 usecs
[ 37.070638] intel8x0: clocking to 48000
[ 38.091145] input: ImExPS/2 Generic Explorer Mouse as /class/input/input2
[ 38.095160] parport_pc 00:0a: reported by Plug and Play ACPI
[ 38.095292] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 38.098806] input: PC Speaker as /class/input/input3
[ 38.431357] ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 17 (level, low) -> IRQ 19
[ 38.518370] Linux video capture interface: v2.00
[ 38.570503] Bluetooth: Core ver 2.11
[ 38.570624] NET: Registered protocol family 31
[ 38.570629] Bluetooth: HCI device and connection manager initialized
[ 38.570637] Bluetooth: HCI socket layer initialized
[ 38.655983] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-generic/media/gspcav1/gspca_core.c: USB SPCA5XX camera found.(ZC3XX)
[ 38.716936] Bluetooth: HCI USB driver ver 2.9
[ 38.844518] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/class/usblp.c: Disabling reads from problem bidirectional printer on usblp0
[ 38.858887] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/class/usblp.c: usblp0: USB Unidirectional printer dev 3 if 0 alt 1 proto 2 vid 0x03F0 pid 0x0604
[ 38.858956] usbcore: registered new interface driver usblp
[ 38.858965] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
[ 38.861404] usbcore: registered new interface driver hci_usb
[ 38.862867] usbcore: registered new interface driver gspca
[ 38.862886] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-generic/media/gspcav1/gspca_core.c: gspca driver 01.00.12 registered
[ 39.941028] lp0: using parport0 (interrupt-driven).
[ 40.045085] Adding 682752k swap on /dev/sda3. Priority:-1 extents:1 across:682752k
[ 40.476996] EXT3 FS on sda5, internal journal
[ 42.920501] No dock devices found.
[ 43.219304] input: Power Button (FF) as /class/input/input4
[ 43.230466] ACPI: Power Button (FF) [PWRF]
[ 43.284460] input: Power Button (CM) as /class/input/input5
[ 43.285166] ACPI: Power Button (CM) [PWRB]
[ 43.312453] input: Sleep Button (CM) as /class/input/input6
[ 43.313158] ACPI: Sleep Button (CM) [FUTS]
[ 45.651637] Failure registering capabilities with primary security module.
[ 46.517772] eth0: link down
[ 46.629347] ppdev: user-space parallel port driver
[ 47.503444] audit(1200575758.390:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=4934 profile="/usr/sbin/cupsd"
[ 47.690652] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[ 47.690666] apm: overridden by ACPI.
[ 49.293137] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[ 49.293150] vboxdrv: Successfully done.
[ 49.852488] Bluetooth: L2CAP ver 2.8
[ 49.852499] Bluetooth: L2CAP socket layer initialized
[ 50.047560] Bluetooth: RFCOMM socket layer initialized
[ 50.048202] Bluetooth: RFCOMM TTY layer initialized
[ 50.048216] Bluetooth: RFCOMM ver 1.8
[ 51.866814] [drm] Initialized drm 1.1.0 20060810
[ 51.948288] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 18
[ 51.956896] [drm] Initialized radeon 1.27.0 20060524 on minor 0
[ 54.411101] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
[ 54.411361] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
[ 54.411616] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
[ 54.885445] [drm] Setting GART location based on new memory map
[ 54.885516] [drm] writeback test succeeded in 1 usecs
[ 104.478855] usb 1-2: new full speed USB device using ohci_hcd and address 2
[ 104.695041] usb 1-2: configuration #1 chosen from 1 choice
[ 106.998756] usbcore: registered new interface driver cxacru
[ 107.382567] cxacru 1-2:1.0: firmware (cxacru-fw.bin) unavailable (system misconfigured?)

...continua...

colibri81

...e questa e' la risposta dal terminale dopo aver riavviato con xp per trovare la linea adsl e poi riavviato con ubuntu:

[ 0.000000] Linux version 2.6.22-14-generic (buildd@terranova) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Tue Dec 18 08:02:57 UTC 2007 (Ubuntu 2.6.22-14.47-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000002fff0000 (usable)
[ 0.000000] BIOS-e820: 000000002fff0000 - 000000002fff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000002fff3000 - 0000000030000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 767MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f62d0
[ 0.000000] Entering add_active_range(0, 0, 196592) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 196592
[ 0.000000] HighMem 196592 -> 196592
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 196592
[ 0.000000] On node 0 totalpages: 196592
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1503 pages used for memmap
[ 0.000000] Normal zone: 190993 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] DMI 2.2 present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F7C80 checksum 0
[ 0.000000] ACPI: RSDP 000F7C80, 0014 (r0 AWARD )
[ 0.000000] ACPI: RSDT 2FFF3000, 002C (r1 AWARD AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: FACP 2FFF3040, 0074 (r1 AWARD AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: DSDT 2FFF30C0, 3C46 (r1 AWARD AWRDACPI 1000 MSFT 100000C)
[ 0.000000] ACPI: FACS 2FFF0000, 0040
[ 0.000000] ACPI: APIC 2FFF6D40, 0054 (r1 AWARD AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: PM-Timer IO Port: 0x5008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:7 APIC version 16
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 30000000:cec00000)
[ 0.000000] Built 1 zonelists. Total pages: 195057
[ 0.000000] Kernel command line: root=UUID=9ede78cc-df54-4e30-b9a3-ea3d0b55ad90 ro quiet splash locale=it_IT
[ 0.000000] mapped APIC to ffffd000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffc000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 995.814 MHz processor.
[ 13.640995] Console: colour VGA+ 80x25
[ 13.642665] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 13.645519] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 13.688307] Memory: 767884k/786368k available (2015k kernel code, 17864k reserved, 916k data, 364k init, 0k highmem)
[ 13.688328] virtual kernel memory layout:
[ 13.688330] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB)
[ 13.688333] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 13.688335] vmalloc : 0xf0800000 - 0xff7fe000 ( 239 MB)
[ 13.688338] lowmem : 0xc0000000 - 0xefff0000 ( 767 MB)
[ 13.688340] .init : 0xc03e3000 - 0xc043e000 ( 364 kB)
[ 13.688343] .data : 0xc02f7de6 - 0xc03dce84 ( 916 kB)
[ 13.688345] .text : 0xc0100000 - 0xc02f7de6 (2015 kB)
[ 13.688353] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 13.688436] SLUB: Genslabs=22, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[ 13.768439] Calibrating delay using timer specific routine.. 1992.89 BogoMIPS (lpj=3985784)
[ 13.768498] Security Framework v1.0.0 initialized
[ 13.768511] SELinux: Disabled at boot.
[ 13.768542] Mount-cache hash table entries: 512
[ 13.768802] CPU: After generic identify, caps: 0383fbff c1c7fbff 00000000 00000000 00000000 00000000 00000000
[ 13.768822] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 13.768827] CPU: L2 Cache: 64K (64 bytes/line)
[ 13.768833] CPU: After all inits, caps: 0383fbff c1c7fbff 00000000 00000420 00000000 00000000 00000000
[ 13.768856] Compat vDSO mapped to ffffe000.
[ 13.768881] Checking 'hlt' instruction... OK.
[ 13.784697] SMP alternatives: switching to UP code
[ 13.785270] Freeing SMP alternatives: 11k freed
[ 13.785984] Early unpacking initramfs... done
[ 14.412086] ACPI: Core revision 20070126
[ 14.412289] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 14.469108] CPU0: AMD Duron(tm) processor stepping 00
[ 14.469148] Total of 1 processors activated (1992.89 BogoMIPS).
[ 14.469263] ENABLING IO-APIC IRQs
[ 14.469475] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 14.616306] Brought up 1 CPUs
[ 14.616584] Booting paravirtualized kernel on bare hardware
[ 14.616692] Time: 14:21:48 Date: 00/17/108
[ 14.616757] NET: Registered protocol family 16
[ 14.617009] EISA bus registered
[ 14.617032] ACPI: bus type pci registered
[ 14.617392] PCI: PCI BIOS revision 2.10 entry at 0xfb3e0, last bus=1
[ 14.617398] PCI: Using configuration type 1
[ 14.617402] Setting up standard PCI resources
[ 14.620755] ACPI: EC: Look up EC in DSDT
[ 14.626985] ACPI: Interpreter enabled
[ 14.626997] ACPI: (supports S0 S1 S4 S5)
[ 14.627028] ACPI: Using IOAPIC for interrupt routing
[ 14.639844] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 14.639858] PCI: Probing PCI hardware (bus 00)
[ 14.640128] Enabling SiS 96x SMBus.
[ 14.641071] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 14.685275] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 14.685475] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15) *9
[ 14.685655] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 14.685833] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 14.686011] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 14.686189] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 14.686367] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 14.686547] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 14.686825] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 14.686867] pnp: PnP ACPI init
[ 14.686895] ACPI: bus type pnp registered
[ 14.694898] pnp: PnP ACPI: found 15 devices
[ 14.694906] ACPI: ACPI bus type pnp unregistered
[ 14.694916] PnPBIOS: Disabled by ACPI PNP
[ 14.695044] PCI: Using ACPI for IRQ routing
[ 14.695051] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 14.704135] NET: Registered protocol family 8
[ 14.704140] NET: Registered protocol family 20
[ 14.704195] Time: tsc clocksource has been installed.
[ 14.704374] pnp: 00:00: iomem range 0xcb000-0xcbfff has been reserved
[ 14.704382] pnp: 00:00: iomem range 0xf0000-0xf7fff could not be reserved
[ 14.704388] pnp: 00:00: iomem range 0xf8000-0xfbfff could not be reserved
[ 14.704394] pnp: 00:00: iomem range 0xfc000-0xfffff could not be reserved
[ 14.735121] PCI: Bridge: 0000:00:01.0
[ 14.735130] IO window: 9000-9fff
[ 14.735139] MEM window: ec000000-edffffff
[ 14.735146] PREFETCH window: e0000000-e7ffffff
[ 14.735194] NET: Registered protocol family 2
[ 14.772298] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 14.772743] TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
[ 14.778380] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 14.780374] TCP: Hash tables configured (established 131072 bind 65536)
[ 14.780382] TCP reno registered
[ 14.792487] checking if image is initramfs...Switched to high resolution mode on CPU 0
[ 15.331249] it is
[ 15.981512] Freeing initrd memory: 7047k freed
[ 15.982436] audit: initializing netlink socket (disabled)
[ 15.982468] audit(1200579708.860:1): initialized
[ 15.987040] VFS: Disk quotas dquot_6.5.1
[ 15.987172] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 15.987427] io scheduler noop registered
[ 15.987433] io scheduler anticipatory registered
[ 15.987437] io scheduler deadline registered
[ 15.987482] io scheduler cfq registered (default)
[ 15.987555] pci 0000:00:0e.0: HCRESET not completed yet!
[ 15.987571] pci 0000:00:0e.1: HCRESET not completed yet!
[ 15.987592] Boot video device is 0000:01:00.0
[ 15.988060] isapnp: Scanning for PnP cards...
[ 16.341440] isapnp: No Plug & Play device found
[ 16.467037] Real Time Clock Driver v1.12ac
[ 16.467237] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 16.467377] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 16.468104] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 16.470095] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 16.470929] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 16.472968] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 16.473308] input: Macintosh mouse button emulation as /class/input/input0
[ 16.473497] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 16.473852] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 16.473864] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 16.474262] mice: PS/2 mouse device common for all mice
[ 16.474545] EISA: Probing bus 0 at eisa.0
[ 16.474576] Cannot allocate resource for EISA slot 4
[ 16.474581] Cannot allocate resource for EISA slot 5
[ 16.474599] EISA: Detected 0 cards.
[ 16.474809] TCP cubic registered
[ 16.474829] NET: Registered protocol family 1
[ 16.474873] Using IPI No-Shortcut mode
[ 16.475314] Magic number: 8:552:384
[ 16.476801] Freeing unused kernel memory: 364k freed
[ 16.531668] input: AT Translated Set 2 keyboard as /class/input/input1
[ 18.022542] AppArmor: AppArmor initializedaudit(1200579710.860:2): type=1505 info="AppArmor initialized" pid=1194
[ 18.037898] fuse init (API version 7.

[ 18.049988] Failure registering capabilities with primary security module.
[ 18.068563] ACPI: Fan [FAN] (on)
[ 18.082418] ACPI: Thermal Zone [THRM] (40 C)
[ 19.733609] usbcore: registered new interface driver usbfs
[ 19.733678] usbcore: registered new interface driver hub
[ 19.733729] usbcore: registered new device driver usb
[ 19.735572] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 19.735655] ACPI: PCI Interrupt 0000:00:02.2[D] -> GSI 19 (level, low) -> IRQ 16
[ 19.735681] ohci_hcd 0000:00:02.2: OHCI Host Controller
[ 19.736102] ohci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
[ 19.736146] ohci_hcd 0000:00:02.2: irq 16, io mem 0xee011000
[ 19.771456] SCSI subsystem initialized
[ 19.782061] libata version 2.21 loaded.
[ 19.816774] usb usb1: configuration #1 chosen from 1 choice
[ 19.816841] hub 1-0:1.0: USB hub found
[ 19.816867] hub 1-0:1.0: 3 ports detected
[ 19.884757] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 19.903993] USB Universal Host Controller Interface driver v3.0
[ 19.918709] ACPI: PCI Interrupt 0000:00:02.3[A] -> GSI 23 (level, low) -> IRQ 17
[ 19.918743] ohci_hcd 0000:00:02.3: OHCI Host Controller
[ 19.918802] ohci_hcd 0000:00:02.3: new USB bus registered, assigned bus number 2
[ 19.918844] ohci_hcd 0000:00:02.3: irq 17, io mem 0xee010000
[ 19.976633] usb usb2: configuration #1 chosen from 1 choice
[ 19.976704] hub 2-0:1.0: USB hub found
[ 19.976728] hub 2-0:1.0: 3 ports detected
[ 20.079751] pata_sis 0000:00:02.5: version 0.5.1
[ 20.080196] scsi0 : pata_sis
[ 20.080316] scsi1 : pata_sis
[ 20.080637] ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00014000 irq 14
[ 20.080645] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x00014008 irq 15
[ 20.128557] Floppy drive(s): fd0 is 1.44M
[ 20.198884] FDC 0 is a post-1991 82077
[ 20.222320] usb 1-2: new full speed USB device using ohci_hcd and address 2
[ 20.250691] ata1.00: ATA-5: QUANTUM FIREBALLP AS20.5, A1Y.1500, max UDMA/100
[ 20.250703] ata1.00: 40132503 sectors, multi 16: LBA
[ 20.250839] ata1.01: ATA-7: Maxtor 6E040L0, NAR61590, max UDMA/133
[ 20.250845] ata1.01: 80293248 sectors, multi 16: LBA
[ 20.266654] ata1.00: configured for UDMA/100
[ 20.282650] ata1.01: configured for UDMA/100
[ 20.456374] usb 1-2: configuration #1 chosen from 1 choice
[ 20.766266] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-4163B, A101, max UDMA/33
[ 20.766283] ata2.01: ATAPI: LG CD-ROM CRD-8521B, 1.03, max MWDMA2
[ 20.938208] ata2.00: configured for UDMA/33
[ 21.102160] ata2.01: configured for PIO4
[ 21.102429] scsi 0:0:0:0: Direct-Access ATA QUANTUM FIREBALL A1Y. PQ: 0 ANSI: 5
[ 21.103724] scsi 0:0:1:0: Direct-Access ATA Maxtor 6E040L0 NAR6 PQ: 0 ANSI: 5
[ 21.108592] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-4163B A101 PQ: 0 ANSI: 5
[ 21.110032] scsi 1:0:1:0: CD-ROM LG CD-ROM CRD-8521B 1.03 PQ: 0 ANSI: 5
[ 21.118932] 8139cp 0000:00:0d.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
[ 21.118945] 8139cp 0000:00:0d.0: Try the "8139too" driver instead.
[ 21.123058] 8139too Fast Ethernet driver 0.9.28
[ 21.124286] ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 19 (level, low) -> IRQ 16
[ 21.125344] eth0: RealTek RTL8139 at 0xf083a000, 00:30:4f:15:6e:95, IRQ 16
[ 21.125353] eth0: Identified 8139 chip type 'RTL-8139C'
[ 21.126509] ACPI: PCI Interrupt 0000:00:0e.0[A] -> GSI 16 (level, low) -> IRQ 18
[ 21.126541] uhci_hcd 0000:00:0e.0: UHCI Host Controller
[ 21.127177] uhci_hcd 0000:00:0e.0: new USB bus registered, assigned bus number 3
[ 21.127231] uhci_hcd 0000:00:0e.0: irq 18, io base 0x0000c000
[ 21.128607] usb usb3: configuration #1 chosen from 1 choice
[ 21.129217] hub 3-0:1.0: USB hub found
[ 21.129247] hub 3-0:1.0: 2 ports detected
[ 21.178019] sd 0:0:0:0: [sda] 40132503 512-byte hardware sectors (20548 MB)
[ 21.179688] sd 0:0:0:0: [sda] Write Protect is off
[ 21.179700] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 21.179783] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 21.179941] sd 0:0:0:0: [sda] 40132503 512-byte hardware sectors (20548 MB)
[ 21.179966] sd 0:0:0:0: [sda] Write Protect is off
[ 21.179971] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 21.180007] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 21.180019] sda: sda1 sda2 sda3
[ 21.230245] ACPI: PCI Interrupt 0000:00:0e.1 -> GSI 17 (level, low) -> IRQ 19
[ 21.230272] uhci_hcd 0000:00:0e.1: UHCI Host Controller
[ 21.230334] uhci_hcd 0000:00:0e.1: new USB bus registered, assigned bus number 4
[ 21.230381] uhci_hcd 0000:00:0e.1: irq 19, io base 0x0000c400
[ 21.230653] usb usb4: configuration #1 chosen from 1 choice
[ 21.230715] hub 4-0:1.0: USB hub found
[ 21.230737] hub 4-0:1.0: 2 ports detected
[ 21.238238] sd 0:0:0:0: [sda] Attached SCSI disk
[ 21.238957] sd 0:0:1:0: [sdb] 80293248 512-byte hardware sectors (41110 MB)
[ 21.238992] sd 0:0:1:0: [sdb] Write Protect is off
[ 21.238998] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 21.239036] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 21.239181] sd 0:0:1:0: [sdb] 80293248 512-byte hardware sectors (41110 MB)
[ 21.239204] sd 0:0:1:0: [sdb] Write Protect is off
[ 21.239209] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 21.239245] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 21.239252] sdb:ACPI: PCI Interrupt 0000:00:0e.2[C] -> GSI 18 (level, low) -> IRQ 20
[ 21.334458] ehci_hcd 0000:00:0e.2: EHCI Host Controller
[ 21.334549] ehci_hcd 0000:00:0e.2: new USB bus registered, assigned bus number 5
[ 21.334646] ehci_hcd 0000:00:0e.2: irq 20, io mem 0xee013000
[ 21.334657] ehci_hcd 0000:00:0e.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 21.334902] usb usb5: configuration #1 chosen from 1 choice
[ 21.334979] hub 5-0:1.0: USB hub found
[ 21.335001] hub 5-0:1.0: 4 ports detected
[ 21.981664] usb 5-2: new high speed USB device using ehci_hcd and address 2
[ 22.005325] [LDM] sdb1
[ 22.006914] sd 0:0:1:0: [sdb] Attached SCSI disk
[ 22.018663] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 22.019270] sd 0:0:1:0: Attached scsi generic sg1 type 0
[ 22.019824] sr 1:0:0:0: Attached scsi generic sg2 type 5
[ 22.020371] scsi 1:0:1:0: Attached scsi generic sg3 type 5
[ 22.085444] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[ 22.085458] Uniform CD-ROM driver Revision: 3.20
[ 22.085681] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 22.089723] sr1: scsi3-mmc drive: 0x/52x cd/rw xa/form2 cdda tray
[ 22.089875] sr 1:0:1:0: Attached scsi CD-ROM sr1
[ 22.115129] usb 5-2: configuration #1 chosen from 1 choice
[ 22.115494] hub 5-2:1.0: USB hub found
[ 22.115792] hub 5-2:1.0: 4 ports detected
[ 22.726116] Attempting manual resume
[ 22.726125] swsusp: Resume From Partition 8:3
[ 22.726128] PM: Checking swsusp image.
[ 22.726566] PM: Resume from disk failed.
[ 22.781189] kjournald starting. Commit interval 5 seconds
[ 22.781234] EXT3-fs: mounted filesystem with ordered data mode.
[ 22.937309] usb 4-1: new full speed USB device using uhci_hcd and address 2
[ 23.135386] usb 4-1: configuration #1 chosen from 1 choice
[ 23.377148] usb 4-2: new full speed USB device using uhci_hcd and address 3
[ 23.573327] usb 4-2: configuration #1 chosen from 1 choice
[ 23.777316] usb 5-2.2: new full speed USB device using ehci_hcd and address 5
[ 23.870828] usb 5-2.2: configuration #1 chosen from 1 choice
[ 23.870994] hub 5-2.2:1.0: USB hub found
[ 23.871173] hub 5-2.2:1.0: 3 ports detected
[ 24.172922] usb 5-2.2.1: new full speed USB device using ehci_hcd and address 6
[ 24.269063] usb 5-2.2.1: configuration #1 chosen from 1 choice
[ 24.468906] usb 5-2.2.2: new full speed USB device using ehci_hcd and address 7
[ 24.563931] usb 5-2.2.2: configuration #1 chosen from 1 choice
[ 24.760780] usb 5-2.2.3: new full speed USB device using ehci_hcd and address 8
[ 24.855790] usb 5-2.2.3: configuration #1 chosen from 1 choice
[ 35.418682] sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x5080
[ 35.698546] Linux agpgart interface v0.102 (c) Dave Jones
[ 35.711868] sis630_smbus 0000:00:02.0: SIS630 comp. bus not detected, module not inserted.
[ 35.741102] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 35.776129] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 35.788307] agpgart: Detected SiS chipset - id:1861
[ 35.794740] agpgart: AGP aperture is 64M @ 0xe8000000
[ 35.857161] gameport: EMU10K1 is pci0000:00:0b.1/gameport0, io 0xb400, speed 685kHz
[ 37.360509] ATM dev 0: ADSL state: stopped
[ 37.360524] ATM dev 0: ADSL line: down
[ 37.360664] usbcore: registered new interface driver cxacru
[ 38.668841] ATM dev 0: ADSL state: running
[ 38.668852] ATM dev 0: ADSL line: initializing
[ 38.850423] input: ImExPS/2 Generic Explorer Mouse as /class/input/input2
[ 38.890398] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/class/usblp.c: Disabling reads from problem bidirectional printer on usblp0
[ 38.905639] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/class/usblp.c: usblp0: USB Unidirectional printer dev 3 if 0 alt 1 proto 2 vid 0x03F0 pid 0x0604
[ 38.905713] usbcore: registered new interface driver usblp
[ 38.905721] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
[ 38.946517] parport_pc 00:0a: reported by Plug and Play ACPI
[ 38.946654] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 39.289490] input: PC Speaker as /class/input/input3
[ 39.304484] Linux video capture interface: v2.00
[ 39.350837] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-generic/media/gspcav1/gspca_core.c: USB SPCA5XX camera found.(ZC3XX)
[ 39.537941] usbcore: registered new interface driver gspca
[ 39.537956] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-generic/media/gspcav1/gspca_core.c: gspca driver 01.00.12 registered
[ 39.675333] ATM dev 0: ADSL line: down
[ 39.832875] ACPI: PCI Interrupt 0000:00:02.7[C] -> GSI 18 (level, low) -> IRQ 20
[ 39.914706] Bluetooth: Core ver 2.11
[ 39.914856] NET: Registered protocol family 31
[ 39.914861] Bluetooth: HCI device and connection manager initialized
[ 39.914869] Bluetooth: HCI socket layer initialized
[ 39.981074] Bluetooth: HCI USB driver ver 2.9
[ 39.982120] usbcore: registered new interface driver hci_usb
[ 39.991961] usbcore: registered new interface driver hiddev
[ 39.994051] input: HID 0a5c:4502 as /class/input/input4
[ 39.994196] input: USB HID v1.11 Keyboard [HID 0a5c:4502] on usb-0000:00:0e.2-2.2.2
[ 39.996324] input: HID 0a5c:4503 as /class/input/input5
[ 39.996486] input: USB HID v1.11 Mouse [HID 0a5c:4503] on usb-0000:00:0e.2-2.2.3
[ 39.996522] usbcore: registered new interface driver usbhid
[ 39.996531] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 40.155248] intel8x0_measure_ac97_clock: measured 54819 usecs
[ 40.155260] intel8x0: clocking to 48000
[ 40.156949] ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 17 (level, low) -> IRQ 19
[ 41.280254] lp0: using parport0 (interrupt-driven).
[ 41.374885] Adding 682752k swap on /dev/sda3. Priority:-1 extents:1 across:682752k
[ 41.786720] EXT3 FS on sda5, internal journal
[ 44.286275] No dock devices found.
[ 44.594168] input: Power Button (FF) as /class/input/input6
[ 44.605548] ACPI: Power Button (FF) [PWRF]
[ 44.661655] input: Power Button (CM) as /class/input/input7
[ 44.662358] ACPI: Power Button (CM) [PWRB]
[ 44.689649] input: Sleep Button (CM) as /class/input/input8
[ 44.690335] ACPI: Sleep Button (CM) [FUTS]
[ 45.662246] ATM dev 0: ADSL line: attempting to activate
[ 46.668732] ATM dev 0: ADSL line: down
[ 46.948243] Failure registering capabilities with primary security module.
[ 48.190883] ppdev: user-space parallel port driver
[ 48.211873] eth0: link down
[ 48.663704] ATM dev 0: ADSL line: attempting to activate
[ 49.328780] audit(1200576143.135:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=5029 profile="/usr/sbin/cupsd"
[ 49.506314] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[ 49.506327] apm: overridden by ACPI.
[ 49.670197] ATM dev 0: ADSL line: down
[ 50.825253] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[ 50.825265] vboxdrv: Successfully done.
[ 51.392906] Bluetooth: L2CAP ver 2.8
[ 51.392917] Bluetooth: L2CAP socket layer initialized
[ 51.551532] Bluetooth: RFCOMM socket layer initialized
[ 51.551751] Bluetooth: RFCOMM TTY layer initialized
[ 51.551757] Bluetooth: RFCOMM ver 1.8
[ 51.665156] ATM dev 0: ADSL line: attempting to activate
[ 53.727861] [drm] Initialized drm 1.1.0 20060810
[ 53.749814] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 18
[ 53.757075] [drm] Initialized radeon 1.27.0 20060524 on minor 0
[ 55.657097] ATM dev 0: ADSL line: training
[ 56.077234] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
[ 56.077500] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
[ 56.077822] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
[ 56.552212] [drm] Setting GART location based on new memory map
[ 56.552283] [drm] writeback test succeeded in 1 usecs
[ 56.662594] ATM dev 0: ADSL line: channel analysis
[ 61.656045] ATM dev 0: ADSL line: up (5056 kb/s down | 352 kb/s up)
[ 130.664212] PPP generic driver version 2.4.2
[ 130.769810] NET: Registered protocol family 10
[ 130.770222] lo: Disabled Privacy Extensions
[ 130.770503] ADDRCONF(NETDEV_UP): eth0: link is not ready

grazie spero tu mi possa aiutare

colibri

mistermax80

In modem è riconosciuto, forse non riesce a connettersi...

Controllo i passi che hai eseguito, se non ne hai saltato qualcuno...
http://wiki.ubuntu-it.org/Hardware/Modem/DigicomMichelangeloUsbCx?highlight=%28michelangelo%29

colibri81

non ho seguito questa guida per la configurazione del modem...ora seguo questa e vedo che accade...

ciao e grazie

FregTuX · Messaggio da **FregTuX** » giovedì 17 gennaio 2008, 14:59

Anche io avevo il tuo stesso problema...

Controlla che il file cxacru-fw.bin in /lib/firmware abbia i permessi di esecuzioni, sia da root che da utente normale

colibri81

mister...
seguo la guida...ma mi blocco ad un punto quando mi chiede:

sudo cp /media/cdrom0/DRIVER/WINDOWS/WAN/CNXETU.SYS /home/vostronomeutente/

perche' non ho un cd di installazione ma ho scaricato un exe da internet.

Come posso scavalcare il problema?
Forse lo posso trovare sulla partizione di win?Oppure ci vorrebbe estrarre questo file eseguibile?

grazie

mistermax80

CnxEtU.sys

File che ci serve è questo, scaricalo dal sito del modem, come driver per windows, poi cerchi nel file zippato che hai scaricato...

FregTuX · Messaggio da **FregTuX** » giovedì 17 gennaio 2008, 19:48

Allora non hai inserito in /lib/firmware il firmware estratto (cxacru-fw.bin); estraiti il firmware seguendo la guida presente nella documentazione.

Vedi se riesci ad estrarlo, altrimenti te lo posso postare io

colibri81

cio' provato...niente!!
Dentro il file zip c'e' l'eseguibile...cosa al quanto stupida be' comunque la situazione e' questa.

Gentilmente me lo postate o me lo inviate in mail o non so...ditemi voi...
...e mi dovreste dire se con il file che mi postate e' quello della guida o qualcosa cambia.

grazie per la pazienza

PS per favore mi dite anche come posso aggiungere un file nelle cartelle che appartengono al root, perche' mi dice sempre accesso negato...ma non mi chiede di inserire la pass. Penso che si debba fare dal terminale...mi illuminate.

mistermax80

apri nautilus da terminale in questo modo...

Codice: Seleziona tutto

sudo nautilus

In questo modo puoi andare ovunque... occhio...

FregTuX · Messaggio da **FregTuX** » sabato 19 gennaio 2008, 13:50

Scarica il cxacru-fw.bin che ti ho uppato da qui:

http://rapidshare.de/files/38341339/cxacru-fw.bin.html

Poi dando:

Codice: Seleziona tutto

sudo nautilus

metti questo file in /lib/firmware, quindi riavvia.

Dovresti risolvere ogni problema

colibri81

FregTuX ha scritto: Scarica il cxacru-fw.bin che ti ho uppato da qui:

http://rapidshare.de/files/38341339/cxacru-fw.bin.html

Poi dando:
Codice: Seleziona tutto
sudo nautilus
metti questo file in /lib/firmware, quindi riavvia.

Dovresti risolvere ogni problema

ciao grazie mille funziona!!!!grandioso!!

Un ringraziamento a tutti voi che mi avete aiutato molto gentili!!!questo forum e' favoloso!!

ciao e grazie ancora

VIVA L'OPEN SOURCE!!

FregTuX · Messaggio da **FregTuX** » lunedì 21 gennaio 2008, 19:33

Di nulla

Sf4tt · Messaggio da **Sf4tt** » giovedì 24 gennaio 2008, 16:35

Salve, ho lo stesso identico problema col mio modem Atlantis Land, credo stesso chipset, il mio è Conexant Access Runner, giusto?

Avevo bypassato il problema comprando un router wireless che già da tempo volevo acquistare, ma che, dopo 15 giorni di vita, un fulmine mi ha bruciato >:(. In attesa di prenderne un altro vorrei risolvere questo impiccio col modem usb.

Mi domandavo quindi se è possibile che la soluzione al problema sia la stessa, adesso cmq riavvio a modem staccato e posto i log del dmesg

EDIT:

dmesg dopo riavvio a modem staccato:

Codice: Seleziona tutto

[    0.000000] Linux version 2.6.20-16-generic (root@terranova) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Tue Dec 18 05:45:12 UTC 2007 (Ubuntu 2.6.20-16.33-generic)
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] sanitize start
[    0.000000] sanitize end
[    0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009f800 end: 000000000009f800 type: 1
[    0.000000] copy_e820_map() type is E820_RAM
[    0.000000] copy_e820_map() start: 000000000009f800 size: 0000000000000800 end: 00000000000a0000 type: 2
[    0.000000] copy_e820_map() start: 00000000000f0000 size: 0000000000010000 end: 0000000000100000 type: 2
[    0.000000] copy_e820_map() start: 0000000000100000 size: 000000001fef0000 end: 000000001fff0000 type: 1
[    0.000000] copy_e820_map() type is E820_RAM
[    0.000000] copy_e820_map() start: 000000001fff0000 size: 0000000000003000 end: 000000001fff3000 type: 4
[    0.000000] copy_e820_map() start: 000000001fff3000 size: 000000000000d000 end: 0000000020000000 type: 3
[    0.000000] copy_e820_map() start: 00000000fec00000 size: 0000000001400000 end: 0000000100000000 type: 2
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
[    0.000000]  BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[    0.000000] 0MB HIGHMEM available.
[    0.000000] 511MB LOWMEM available.
[    0.000000] found SMP MP-table at 000f5990
[    0.000000] Entering add_active_range(0, 0, 131056) 0 entries of 256 used
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   Normal       4096 ->   131056
[    0.000000]   HighMem    131056 ->   131056
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0:        0 ->   131056
[    0.000000] On node 0 totalpages: 131056
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 4064 pages, LIFO batch:0
[    0.000000]   Normal zone: 991 pages used for memmap
[    0.000000]   Normal zone: 125969 pages, LIFO batch:31
[    0.000000]   HighMem zone: 0 pages used for memmap
[    0.000000] DMI 2.2 present.
[    0.000000] ACPI: RSDP (v000 AWARD                                 ) @ 0x000f7300
[    0.000000] ACPI: RSDT (v001 AWARD  AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3000
[    0.000000] ACPI: FADT (v001 AWARD  AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3040
[    0.000000] ACPI: MADT (v001 AWARD  AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff6b00
[    0.000000] ACPI: DSDT (v001 AWARD  AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] Processor #0 15:3 APIC version 20
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] Processor #1 15:3 APIC version 20
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000)
[    0.000000] Detected 3007.085 MHz processor.
[   12.190717] Built 1 zonelists.  Total pages: 130033
[   12.190724] Kernel command line: root=UUID=64c16f95-cc21-449d-a631-b1e468b032ce ro quiet splash locale=it_IT
[   12.190900] mapped APIC to ffffd000 (fee00000)
[   12.190903] mapped IOAPIC to ffffc000 (fec00000)
[   12.190907] Enabling fast FPU save and restore... done.
[   12.190910] Enabling unmasked SIMD FPU exception support... done.
[   12.190925] Initializing CPU#0
[   12.191011] PID hash table entries: 2048 (order: 11, 8192 bytes)
[   12.191990] Console: colour VGA+ 80x25
[   12.192379] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[   12.192692] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[   12.202220] Memory: 508600k/524224k available (1993k kernel code, 15016k reserved, 900k data, 328k init, 0k highmem)
[   12.202230] virtual kernel memory layout:
[   12.202232]     fixmap  : 0xfff4e000 - 0xfffff000   ( 708 kB)
[   12.202233]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[   12.202234]     vmalloc : 0xe0800000 - 0xff7fe000   ( 495 MB)
[   12.202235]     lowmem  : 0xc0000000 - 0xdfff0000   ( 511 MB)
[   12.202236]       .init : 0xc03d9000 - 0xc042b000   ( 328 kB)
[   12.202237]       .data : 0xc02f2429 - 0xc03d36d4   ( 900 kB)
[   12.202238]       .text : 0xc0100000 - 0xc02f2429   (1993 kB)
[   12.202242] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[   12.278876] Calibrating delay using timer specific routine.. 6017.68 BogoMIPS (lpj=12035363)
[   12.278920] Security Framework v1.0.0 initialized
[   12.278927] SELinux:  Disabled at boot.
[   12.278944] Mount-cache hash table entries: 512
[   12.279092] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000441d 00000000 00000000
[   12.279101] monitor/mwait feature present.
[   12.279102] using mwait in idle threads.
[   12.279110] CPU: Trace cache: 12K uops, L1 D cache: 16K
[   12.279112] CPU: L2 cache: 1024K
[   12.279115] CPU: Physical Processor ID: 0
[   12.279118] CPU: After all inits, caps: bfebfbff 00000000 00000000 00003180 0000441d 00000000 00000000
[   12.279129] Compat vDSO mapped to ffffe000.
[   12.279132] Remapping vsyscall page to ffffe000
[   12.279149] Checking 'hlt' instruction... OK.
[   12.294940] SMP alternatives: switching to UP code
[   12.295289] Early unpacking initramfs... done
[   12.568339] ACPI: Core revision 20060707
[   12.573227] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT.
[   12.628217] CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 04
[   12.628249] SMP alternatives: switching to SMP code
[   12.628442] Booting processor 1/1 eip 3000
[   12.638913] Initializing CPU#1
[   12.718177] Calibrating delay using timer specific routine.. 6014.05 BogoMIPS (lpj=12028116)
[   12.718188] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000441d 00000000 00000000
[   12.718195] monitor/mwait feature present.
[   12.718203] CPU: Trace cache: 12K uops, L1 D cache: 16K
[   12.718206] CPU: L2 cache: 1024K
[   12.718209] CPU: Physical Processor ID: 0
[   12.718211] CPU: After all inits, caps: bfebfbff 00000000 00000000 00003180 0000441d 00000000 00000000
[   12.718594] CPU1: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 04
[   12.718639] Total of 2 processors activated (12031.73 BogoMIPS).
[   12.718739] ENABLING IO-APIC IRQs
[   12.718920] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[   12.865951] checking TSC synchronization across 2 CPUs: passed.
[    0.003993] Brought up 2 CPUs
[    0.189546] migration_cost=234
[    0.189875] Booting paravirtualized kernel on bare hardware
[    0.189966] Time: 16:37:09  Date: 00/24/108
[    0.190002] NET: Registered protocol family 16
[    0.190112] EISA bus registered
[    0.190119] ACPI: bus type pci registered
[    0.213255] PCI: PCI BIOS revision 2.10 entry at 0xfb510, last bus=1
[    0.213258] PCI: Using configuration type 1
[    0.213260] Setting up standard PCI resources
[    0.228882] ACPI: Interpreter enabled
[    0.228886] ACPI: Using IOAPIC for interrupt routing
[    0.229549] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.229555] PCI: Probing PCI hardware (bus 00)
[    0.229623] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
[    0.230573] Boot video device is 0000:01:00.0
[    0.230684] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.253908] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 14 15)
[    0.254169] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 14 15)
[    0.254424] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 14 15)
[    0.254681] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 14 15)
[    0.254934] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 9 10 11 14 15)
[    0.255193] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 14 15)
[    0.255450] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11 14 15)
[    0.255716] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 14 15)
[    0.257968] Linux Plug and Play Support v0.97 (c) Adam Belay
[    0.257982] pnp: PnP ACPI init
[    0.261064] pnp: PnP ACPI: found 11 devices
[    0.261069] PnPBIOS: Disabled by ACPI PNP
[    0.261130] PCI: Using ACPI for IRQ routing
[    0.261134] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[    0.298154] NET: Registered protocol family 8
[    0.298156] NET: Registered protocol family 20
[    0.298837] PCI: Bridge: 0000:00:01.0
[    0.298841]   IO window: 9000-9fff
[    0.298847]   MEM window: e0000000-e1ffffff
[    0.298852]   PREFETCH window: d0000000-dfffffff
[    0.298903] NET: Registered protocol family 2
[    0.343531] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.343627] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.343718] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.343768] TCP: Hash tables configured (established 16384 bind 8192)
[    0.343772] TCP reno registered
[    0.359558] checking if image is initramfs... it is
[    0.901990] Freeing initrd memory: 6791k freed
[    0.902818] audit: initializing netlink socket (disabled)
[    0.902846] audit(1201192629.616:1): initialized
[    0.903061] VFS: Disk quotas dquot_6.5.1
[    0.903091] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.903165] io scheduler noop registered
[    0.903169] io scheduler anticipatory registered
[    0.903171] io scheduler deadline registered
[    0.903185] io scheduler cfq registered (default)
[    0.986665] isapnp: Scanning for PnP cards...
[    1.337944] isapnp: No Plug & Play device found
[    1.365915] Real Time Clock Driver v1.12ac
[    1.365981] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[    1.366112] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.366845] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.367087] mice: PS/2 mouse device common for all mice
[    1.367802] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[    1.367985] input: Macintosh mouse button emulation as /class/input/input0
[    1.368030] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[    1.368035] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[    1.368292] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    1.368295] PNP: PS/2 controller doesn't have AUX irq; using default 12
[    1.368579] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.368586] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.368723] EISA: Probing bus 0 at eisa.0
[    1.368733] Cannot allocate resource for EISA slot 1
[    1.368743] Cannot allocate resource for EISA slot 4
[    1.368760] EISA: Detected 0 cards.
[    1.398826] TCP cubic registered
[    1.398839] NET: Registered protocol family 1
[    1.398874] Starting balanced_irq
[    1.398886] Using IPI No-Shortcut mode
[    1.398984] input: AT Translated Set 2 keyboard as /class/input/input1
[    1.399085] ACPI: (supports S0 S1 S4 S5)
[    1.399133]   Magic number: 8:51:642
[    1.399687] Freeing unused kernel memory: 328k freed
[    1.401770] Time: tsc clocksource has been installed.
[    2.619220] Capability LSM initialized
[    2.657860] ACPI: Fan [FAN] (on)
[    2.663028] ACPI: Thermal Zone [THRM] (40 C)
[    3.150528] usbcore: registered new interface driver usbfs
[    3.150566] usbcore: registered new interface driver hub
[    3.179089] usbcore: registered new device driver usb
[    3.180662] sis900.c: v1.08.10 Apr. 2 2006
[    3.180732] ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 19 (level, low) -> IRQ 16
[    3.181678] 0000:00:04.0: Unknown PHY transceiver found at address 0.
[    3.182351] 0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1.
[    3.183033] 0000:00:04.0: Unknown PHY transceiver found at address 2.
[    3.183704] 0000:00:04.0: Unknown PHY transceiver found at address 3.
[    3.184376] 0000:00:04.0: Unknown PHY transceiver found at address 4.
[    3.185061] 0000:00:04.0: Unknown PHY transceiver found at address 5.
[    3.185768] 0000:00:04.0: Unknown PHY transceiver found at address 6.
[    3.186629] 0000:00:04.0: Unknown PHY transceiver found at address 7.
[    3.187454] 0000:00:04.0: Unknown PHY transceiver found at address 8.
[    3.188137] 0000:00:04.0: Unknown PHY transceiver found at address 9.
[    3.188821] 0000:00:04.0: Unknown PHY transceiver found at address 10.
[    3.189497] 0000:00:04.0: Unknown PHY transceiver found at address 11.
[    3.190180] 0000:00:04.0: Unknown PHY transceiver found at address 12.
[    3.190856] 0000:00:04.0: Unknown PHY transceiver found at address 13.
[    3.191529] 0000:00:04.0: Unknown PHY transceiver found at address 14.
[    3.192202] 0000:00:04.0: Unknown PHY transceiver found at address 15.
[    3.192874] 0000:00:04.0: Unknown PHY transceiver found at address 16.
[    3.193547] 0000:00:04.0: Unknown PHY transceiver found at address 17.
[    3.194220] 0000:00:04.0: Unknown PHY transceiver found at address 18.
[    3.194895] 0000:00:04.0: Unknown PHY transceiver found at address 19.
[    3.195569] 0000:00:04.0: Unknown PHY transceiver found at address 20.
[    3.196339] 0000:00:04.0: Unknown PHY transceiver found at address 21.
[    3.197101] 0000:00:04.0: Unknown PHY transceiver found at address 22.
[    3.197784] 0000:00:04.0: Unknown PHY transceiver found at address 23.
[    3.198466] 0000:00:04.0: Unknown PHY transceiver found at address 24.
[    3.199148] 0000:00:04.0: Unknown PHY transceiver found at address 25.
[    3.199826] 0000:00:04.0: Unknown PHY transceiver found at address 26.
[    3.200498] 0000:00:04.0: Unknown PHY transceiver found at address 27.
[    3.201168] 0000:00:04.0: Unknown PHY transceiver found at address 28.
[    3.201840] 0000:00:04.0: Unknown PHY transceiver found at address 29.
[    3.202511] 0000:00:04.0: Unknown PHY transceiver found at address 30.
[    3.203187] 0000:00:04.0: Unknown PHY transceiver found at address 31.
[    3.224899] 0000:00:04.0: Using transceiver found at address 1 as default
[    3.225857] eth0: SiS 900 PCI Fast Ethernet at 0xb000, IRQ 16, 00:11:5b:3e:57:56.
[    3.230908] ACPI: PCI Interrupt 0000:00:03.3[D] -> GSI 23 (level, low) -> IRQ 17
[    3.230929] ehci_hcd 0000:00:03.3: EHCI Host Controller
[    3.231100] ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1
[    3.231138] PCI: cache line size of 128 is not supported by device 0000:00:03.3
[    3.231152] ehci_hcd 0000:00:03.3: irq 17, io mem 0xe3011000
[    3.231162] ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[    3.231289] usb usb1: configuration #1 chosen from 1 choice
[    3.231329] hub 1-0:1.0: USB hub found
[    3.231338] hub 1-0:1.0: 8 ports detected
[    3.232849] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[    3.275684] Floppy drive(s): fd0 is 1.44M
[    3.299042] SCSI subsystem initialized
[    3.307989] libata version 2.20 loaded.
[    3.330565] FDC 0 is a post-1991 82077
[    3.338920] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 18
[    3.338952] ohci_hcd 0000:00:03.0: OHCI Host Controller
[    3.338989] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
[    3.339011] ohci_hcd 0000:00:03.0: irq 18, io mem 0xe3013000
[    3.400646] usb usb2: configuration #1 chosen from 1 choice
[    3.400692] hub 2-0:1.0: USB hub found
[    3.400709] hub 2-0:1.0: 3 ports detected
[    3.506489] ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 21 (level, low) -> IRQ 19
[    3.506516] ohci_hcd 0000:00:03.1: OHCI Host Controller
[    3.506560] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3
[    3.506582] ohci_hcd 0000:00:03.1: irq 19, io mem 0xe3015000
[    3.568336] usb usb3: configuration #1 chosen from 1 choice
[    3.568377] hub 3-0:1.0: USB hub found
[    3.568390] hub 3-0:1.0: 3 ports detected
[    3.674211] ACPI: PCI Interrupt 0000:00:03.2[C] -> GSI 22 (level, low) -> IRQ 20
[    3.674237] ohci_hcd 0000:00:03.2: OHCI Host Controller
[    3.674280] ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 4
[    3.674300] ohci_hcd 0000:00:03.2: irq 20, io mem 0xe3010000
[    3.736076] usb usb4: configuration #1 chosen from 1 choice
[    3.736120] hub 4-0:1.0: USB hub found
[    3.736134] hub 4-0:1.0: 2 ports detected
[    3.847077] pata_sis 0000:00:02.5: version 0.5.1
[    3.847165] ACPI: PCI Interrupt 0000:00:02.5[A] -> GSI 16 (level, low) -> IRQ 21
[    3.847336] ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00014000 irq 14
[    3.847402] ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x00014008 irq 15
[    3.847435] scsi0 : pata_sis
[    4.013513] usb 2-2: new low speed USB device using ohci_hcd and address 2
[    4.018025] ata1.00: ata_hpa_resize 1: sectors = 160086528, hpa_sectors = 160086528
[    4.018030] ata1.00: ATA-7: Maxtor 6Y080L0, YAR41BW0, max UDMA/133
[    4.018033] ata1.00: 160086528 sectors, multi 16: LBA 
[    4.029994] ata1.00: ata_hpa_resize 1: sectors = 160086528, hpa_sectors = 160086528
[    4.029997] ata1.00: configured for UDMA/133
[    4.049446] scsi1 : pata_sis
[    4.218158] usb 2-2: configuration #1 chosen from 1 choice
[    4.524683] usb 4-2: new full speed USB device using ohci_hcd and address 2
[    4.548982] ata2.00: ATAPI, max UDMA/33
[    4.548986] ata2.01: ATAPI, max UDMA/33
[    4.716703] ata2.00: configured for UDMA/33
[    4.735298] usb 4-2: configuration #1 chosen from 1 choice
[    4.738505] usbcore: registered new interface driver hiddev
[    4.748480] input: Logitech Optical USB Mouse as /class/input/input2
[    4.748523] input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:03.0-2
[    4.748558] usbcore: registered new interface driver usbhid
[    4.748564] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[    4.888452] ata2.01: configured for UDMA/33
[    4.888625] scsi 0:0:0:0: Direct-Access     ATA      Maxtor 6Y080L0   YAR4 PQ: 0 ANSI: 5
[    4.892533] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-4163B A102 PQ: 0 ANSI: 5
[    4.892924] scsi 1:0:1:0: CD-ROM            SAMSUNG  DVD-ROM SD-612S  sf03 PQ: 0 ANSI: 5
[    4.894981] sata_sis 0000:00:05.0: version 0.7
[    4.895021] ACPI: PCI Interrupt 0000:00:05.0[A] -> GSI 17 (level, low) -> IRQ 22
[    4.895040] sata_sis 0000:00:05.0: Detected SiS 180/181/964 chipset in SATA mode
[    4.895104] ata3: SATA max UDMA/133 cmd 0x0001b400 ctl 0x0001b802 bmdma 0x0001c400 irq 22
[    4.895173] ata4: SATA max UDMA/133 cmd 0x0001bc00 ctl 0x0001c002 bmdma 0x0001c408 irq 22
[    4.895195] scsi2 : sata_sis
[    5.207591] ata3: SATA link down (SStatus 0 SControl 300)
[    5.217734] ATA: abnormal status 0x7F on port 0x0001b407
[    5.217775] scsi3 : sata_sis
[    5.531073] ata4: SATA link down (SStatus 0 SControl 300)
[    5.541217] ATA: abnormal status 0x7F on port 0x0001bc07
[    5.561618] SCSI device sda: 160086528 512-byte hdwr sectors (81964 MB)
[    5.561646] sda: Write Protect is off
[    5.561650] sda: Mode Sense: 00 3a 00 00
[    5.561680] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.561814] SCSI device sda: 160086528 512-byte hdwr sectors (81964 MB)
[    5.561836] sda: Write Protect is off
[    5.561841] sda: Mode Sense: 00 3a 00 00
[    5.561876] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.561883]  sda: sda1 sda2 sda3
[    5.593255] sd 0:0:0:0: Attached scsi disk sda
[    5.598117] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    5.598153] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    5.598181] scsi 1:0:1:0: Attached scsi generic sg2 type 5
[    5.616106] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[    5.616114] Uniform CD-ROM driver Revision: 3.20
[    5.616196] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    5.619605] sr1: scsi3-mmc drive: 1x/40x cd/rw xa/form2 cdda tray
[    5.619653] sr 1:0:1:0: Attached scsi CD-ROM sr1
[    5.882909] Attempting manual resume
[    5.882914] swsusp: Resume From Partition 8:2
[    5.882916] PM: Checking swsusp image.
[    5.891924] PM: Resume from disk failed.
[    5.921453] kjournald starting.  Commit interval 5 seconds
[    5.921464] EXT3-fs: mounted filesystem with ordered data mode.
[   15.505336] eth0: Media Link Off
[   17.038612] NET: Registered protocol family 17
[   17.106507] Linux video capture interface: v2.00
[   17.494534] input: PC Speaker as /class/input/input3
[   17.558059] Linux agpgart interface v0.102 (c) Dave Jones
[   17.692313] parport: PnPBIOS parport detected.
[   17.692389] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[   17.711292] agpgart: Detected SiS 648 chipset
[   17.728913] agpgart: AGP aperture is 256M @ 0xc0000000
[   17.737839] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   17.881708] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   17.905197] saa7130/34: v4l2 driver version 0.2.14 loaded
[   17.905293] ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 17 (level, low) -> IRQ 22
[   17.905307] saa7134[0]: found at 0000:00:09.0, rev: 1, irq: 22, latency: 32, mmio: 0xe3014000
[   17.905316] saa7134[0]: subsystem: 11bd:002b, board: Pinnacle PCTV Stereo (saa7134) [card=26,autodetected]
[   17.905329] saa7134[0]: board init: gpio is 0
[   18.050808] saa7134[0]: i2c eeprom 00: bd 11 2b 00 f8 f8 1c 00 43 43 a9 1c 55 d2 b2 92
[   18.050826] saa7134[0]: i2c eeprom 10: 00 00 19 0e ff 20 ff ff ff ff ff ff ff ff ff ff
[   18.050842] saa7134[0]: i2c eeprom 20: 01 40 01 03 03 ff 03 01 08 ff 00 53 ff ff ff ff
[   18.050858] saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   18.050874] saa7134[0]: i2c eeprom 40: ff 07 00 c0 86 ff 01 01 ff ff ff ff ff ff ff ff
[   18.050889] saa7134[0]: i2c eeprom 50: 0c 22 17 0c 02 11 9a be ff ff ff ff ff ff ff ff
[   18.050905] saa7134[0]: i2c eeprom 60: 03 03 19 71 fb ff ff ff ff ff ff ff ff ff ff ff
[   18.050921] saa7134[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   18.134691] tuner 0-0043: chip found @ 0x86 (saa7134[0])
[   18.134758] tda9887 0-0043: tda988[5/6/7] found @ 0x43 (tuner)
[   18.139647] usbcore: registered new interface driver snd-usb-audio
[   18.186611] tuner 0-0060: Chip ID is not zero. It is not a TEA5767
[   18.186619] tuner 0-0060: chip found @ 0xc0 (saa7134[0])
[   18.206555] tuner 0-0060: microtune: companycode=3cbf part=42 rev=2f
[   18.238506] tuner 0-0060: microtune MT2050 found, OK
[   18.258470] tuner 0-0060: microtune: companycode=3cbf part=42 rev=2f
[   18.290407] tuner 0-0060: microtune MT2050 found, OK
[   18.293051] saa7134[0]: registered device video0 [v4l2]
[   18.293083] saa7134[0]: registered device vbi0
[   18.293180] ACPI: PCI Interrupt 0000:00:02.7[C] -> GSI 18 (level, low) -> IRQ 23
[   18.317602] saa7134 ALSA driver for DMA sound loaded
[   18.317648] saa7134[0]/alsa: saa7134[0] at 0xe3014000 irq 22 registered as card -2
[   18.613884] intel8x0_measure_ac97_clock: measured 58851 usecs
[   18.613889] intel8x0: clocking to 48000
[   18.753882] fuse init (API version 7.8)
[   18.785933] lp0: using parport0 (interrupt-driven).
[   18.820911] Adding 562264k swap on /dev/disk/by-uuid/55729517-b45a-42e8-b8f5-27ac32ee8d3a.  Priority:-1 extents:1 across:562264k
[   18.957555] EXT3 FS on sda3, internal journal
[   24.689851] Using specific hotkey driver
[   24.751866] No dock devices found.
[   24.918742] input: Power Button (FF) as /class/input/input4
[   24.918784] ACPI: Power Button (FF) [PWRF]
[   24.918846] input: Power Button (CM) as /class/input/input5
[   24.918874] ACPI: Power Button (CM) [PWRB]
[   24.918923] input: Sleep Button (CM) as /class/input/input6
[   24.918959] ACPI: Sleep Button (CM) [FUTS]
[   25.010296] ibm_acpi: ec object not found
[   25.138092] pcc_acpi: loading...
[   30.352540] [drm] Initialized drm 1.1.0 20060810
[   30.365615] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 21
[   30.365725] [drm] Initialized radeon 1.25.0 20060524 on minor 0
[   32.104318] ppdev: user-space parallel port driver
[   33.034774] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
[   33.034810] agpgart: Putting AGP V3 device at 0000:00:00.0 into 4x mode
[   33.034816] agpgart: SiS delay workaround: giving bridge time to recover.
[   33.050650] agpgart: Putting AGP V3 device at 0000:01:00.0 into 4x mode
[   33.092722] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[   33.092731] apm: disabled - APM is not SMP safe.
[   33.293712] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   33.385119] [drm] Setting GART location based on new memory map
[   33.385133] [drm] Loading R200 Microcode
[   33.385185] [drm] writeback test succeeded in 1 usecs
[   33.454021] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[   33.468616] NFSD: starting 90-second grace period
[   34.843640] Bluetooth: Core ver 2.11
[   34.843857] NET: Registered protocol family 31
[   34.843862] Bluetooth: HCI device and connection manager initialized
[   34.843867] Bluetooth: HCI socket layer initialized
[   34.879788] Bluetooth: L2CAP ver 2.8
[   34.879798] Bluetooth: L2CAP socket layer initialized
[   35.130158] Bluetooth: RFCOMM socket layer initialized
[   35.130304] Bluetooth: RFCOMM TTY layer initialized
[   35.130309] Bluetooth: RFCOMM ver 1.8
[   45.665888] NET: Registered protocol family 10
[   45.666047] lo: Disabled Privacy Extensions
[   45.666137] ADDRCONF(NETDEV_UP): eth0: link is not ready

Sf4tt · Messaggio da **Sf4tt** » giovedì 24 gennaio 2008, 17:00

dmesg dopo aver connesso il modem alla porta USB:

Codice: Seleziona tutto

[    0.000000] Linux version 2.6.20-16-generic (root@terranova) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Tue Dec 18 05:45:12 UTC 2007 (Ubuntu 2.6.20-16.33-generic)
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] sanitize start
[    0.000000] sanitize end
[    0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009f800 end: 000000000009f800 type: 1
[    0.000000] copy_e820_map() type is E820_RAM
[    0.000000] copy_e820_map() start: 000000000009f800 size: 0000000000000800 end: 00000000000a0000 type: 2
[    0.000000] copy_e820_map() start: 00000000000f0000 size: 0000000000010000 end: 0000000000100000 type: 2
[    0.000000] copy_e820_map() start: 0000000000100000 size: 000000001fef0000 end: 000000001fff0000 type: 1
[    0.000000] copy_e820_map() type is E820_RAM
[    0.000000] copy_e820_map() start: 000000001fff0000 size: 0000000000003000 end: 000000001fff3000 type: 4
[    0.000000] copy_e820_map() start: 000000001fff3000 size: 000000000000d000 end: 0000000020000000 type: 3
[    0.000000] copy_e820_map() start: 00000000fec00000 size: 0000000001400000 end: 0000000100000000 type: 2
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
[    0.000000]  BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[    0.000000] 0MB HIGHMEM available.
[    0.000000] 511MB LOWMEM available.
[    0.000000] found SMP MP-table at 000f5990
[    0.000000] Entering add_active_range(0, 0, 131056) 0 entries of 256 used
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   Normal       4096 ->   131056
[    0.000000]   HighMem    131056 ->   131056
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0:        0 ->   131056
[    0.000000] On node 0 totalpages: 131056
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 4064 pages, LIFO batch:0
[    0.000000]   Normal zone: 991 pages used for memmap
[    0.000000]   Normal zone: 125969 pages, LIFO batch:31
[    0.000000]   HighMem zone: 0 pages used for memmap
[    0.000000] DMI 2.2 present.
[    0.000000] ACPI: RSDP (v000 AWARD                                 ) @ 0x000f7300
[    0.000000] ACPI: RSDT (v001 AWARD  AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3000
[    0.000000] ACPI: FADT (v001 AWARD  AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3040
[    0.000000] ACPI: MADT (v001 AWARD  AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff6b00
[    0.000000] ACPI: DSDT (v001 AWARD  AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] Processor #0 15:3 APIC version 20
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] Processor #1 15:3 APIC version 20
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000)
[    0.000000] Detected 3007.085 MHz processor.
[   12.190717] Built 1 zonelists.  Total pages: 130033
[   12.190724] Kernel command line: root=UUID=64c16f95-cc21-449d-a631-b1e468b032ce ro quiet splash locale=it_IT
[   12.190900] mapped APIC to ffffd000 (fee00000)
[   12.190903] mapped IOAPIC to ffffc000 (fec00000)
[   12.190907] Enabling fast FPU save and restore... done.
[   12.190910] Enabling unmasked SIMD FPU exception support... done.
[   12.190925] Initializing CPU#0
[   12.191011] PID hash table entries: 2048 (order: 11, 8192 bytes)
[   12.191990] Console: colour VGA+ 80x25
[   12.192379] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[   12.192692] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[   12.202220] Memory: 508600k/524224k available (1993k kernel code, 15016k reserved, 900k data, 328k init, 0k highmem)
[   12.202230] virtual kernel memory layout:
[   12.202232]     fixmap  : 0xfff4e000 - 0xfffff000   ( 708 kB)
[   12.202233]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[   12.202234]     vmalloc : 0xe0800000 - 0xff7fe000   ( 495 MB)
[   12.202235]     lowmem  : 0xc0000000 - 0xdfff0000   ( 511 MB)
[   12.202236]       .init : 0xc03d9000 - 0xc042b000   ( 328 kB)
[   12.202237]       .data : 0xc02f2429 - 0xc03d36d4   ( 900 kB)
[   12.202238]       .text : 0xc0100000 - 0xc02f2429   (1993 kB)
[   12.202242] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[   12.278876] Calibrating delay using timer specific routine.. 6017.68 BogoMIPS (lpj=12035363)
[   12.278920] Security Framework v1.0.0 initialized
[   12.278927] SELinux:  Disabled at boot.
[   12.278944] Mount-cache hash table entries: 512
[   12.279092] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000441d 00000000 00000000
[   12.279101] monitor/mwait feature present.
[   12.279102] using mwait in idle threads.
[   12.279110] CPU: Trace cache: 12K uops, L1 D cache: 16K
[   12.279112] CPU: L2 cache: 1024K
[   12.279115] CPU: Physical Processor ID: 0
[   12.279118] CPU: After all inits, caps: bfebfbff 00000000 00000000 00003180 0000441d 00000000 00000000
[   12.279129] Compat vDSO mapped to ffffe000.
[   12.279132] Remapping vsyscall page to ffffe000
[   12.279149] Checking 'hlt' instruction... OK.
[   12.294940] SMP alternatives: switching to UP code
[   12.295289] Early unpacking initramfs... done
[   12.568339] ACPI: Core revision 20060707
[   12.573227] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT.
[   12.628217] CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 04
[   12.628249] SMP alternatives: switching to SMP code
[   12.628442] Booting processor 1/1 eip 3000
[   12.638913] Initializing CPU#1
[   12.718177] Calibrating delay using timer specific routine.. 6014.05 BogoMIPS (lpj=12028116)
[   12.718188] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000441d 00000000 00000000
[   12.718195] monitor/mwait feature present.
[   12.718203] CPU: Trace cache: 12K uops, L1 D cache: 16K
[   12.718206] CPU: L2 cache: 1024K
[   12.718209] CPU: Physical Processor ID: 0
[   12.718211] CPU: After all inits, caps: bfebfbff 00000000 00000000 00003180 0000441d 00000000 00000000
[   12.718594] CPU1: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 04
[   12.718639] Total of 2 processors activated (12031.73 BogoMIPS).
[   12.718739] ENABLING IO-APIC IRQs
[   12.718920] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[   12.865951] checking TSC synchronization across 2 CPUs: passed.
[    0.003993] Brought up 2 CPUs
[    0.189546] migration_cost=234
[    0.189875] Booting paravirtualized kernel on bare hardware
[    0.189966] Time: 16:37:09  Date: 00/24/108
[    0.190002] NET: Registered protocol family 16
[    0.190112] EISA bus registered
[    0.190119] ACPI: bus type pci registered
[    0.213255] PCI: PCI BIOS revision 2.10 entry at 0xfb510, last bus=1
[    0.213258] PCI: Using configuration type 1
[    0.213260] Setting up standard PCI resources
[    0.228882] ACPI: Interpreter enabled
[    0.228886] ACPI: Using IOAPIC for interrupt routing
[    0.229549] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.229555] PCI: Probing PCI hardware (bus 00)
[    0.229623] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
[    0.230573] Boot video device is 0000:01:00.0
[    0.230684] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.253908] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 14 15)
[    0.254169] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 14 15)
[    0.254424] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 14 15)
[    0.254681] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 14 15)
[    0.254934] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 9 10 11 14 15)
[    0.255193] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 14 15)
[    0.255450] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11 14 15)
[    0.255716] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 14 15)
[    0.257968] Linux Plug and Play Support v0.97 (c) Adam Belay
[    0.257982] pnp: PnP ACPI init
[    0.261064] pnp: PnP ACPI: found 11 devices
[    0.261069] PnPBIOS: Disabled by ACPI PNP
[    0.261130] PCI: Using ACPI for IRQ routing
[    0.261134] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[    0.298154] NET: Registered protocol family 8
[    0.298156] NET: Registered protocol family 20
[    0.298837] PCI: Bridge: 0000:00:01.0
[    0.298841]   IO window: 9000-9fff
[    0.298847]   MEM window: e0000000-e1ffffff
[    0.298852]   PREFETCH window: d0000000-dfffffff
[    0.298903] NET: Registered protocol family 2
[    0.343531] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.343627] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.343718] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.343768] TCP: Hash tables configured (established 16384 bind 8192)
[    0.343772] TCP reno registered
[    0.359558] checking if image is initramfs... it is
[    0.901990] Freeing initrd memory: 6791k freed
[    0.902818] audit: initializing netlink socket (disabled)
[    0.902846] audit(1201192629.616:1): initialized
[    0.903061] VFS: Disk quotas dquot_6.5.1
[    0.903091] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.903165] io scheduler noop registered
[    0.903169] io scheduler anticipatory registered
[    0.903171] io scheduler deadline registered
[    0.903185] io scheduler cfq registered (default)
[    0.986665] isapnp: Scanning for PnP cards...
[    1.337944] isapnp: No Plug & Play device found
[    1.365915] Real Time Clock Driver v1.12ac
[    1.365981] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[    1.366112] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.366845] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.367087] mice: PS/2 mouse device common for all mice
[    1.367802] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[    1.367985] input: Macintosh mouse button emulation as /class/input/input0
[    1.368030] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[    1.368035] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[    1.368292] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    1.368295] PNP: PS/2 controller doesn't have AUX irq; using default 12
[    1.368579] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.368586] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.368723] EISA: Probing bus 0 at eisa.0
[    1.368733] Cannot allocate resource for EISA slot 1
[    1.368743] Cannot allocate resource for EISA slot 4
[    1.368760] EISA: Detected 0 cards.
[    1.398826] TCP cubic registered
[    1.398839] NET: Registered protocol family 1
[    1.398874] Starting balanced_irq
[    1.398886] Using IPI No-Shortcut mode
[    1.398984] input: AT Translated Set 2 keyboard as /class/input/input1
[    1.399085] ACPI: (supports S0 S1 S4 S5)
[    1.399133]   Magic number: 8:51:642
[    1.399687] Freeing unused kernel memory: 328k freed
[    1.401770] Time: tsc clocksource has been installed.
[    2.619220] Capability LSM initialized
[    2.657860] ACPI: Fan [FAN] (on)
[    2.663028] ACPI: Thermal Zone [THRM] (40 C)
[    3.150528] usbcore: registered new interface driver usbfs
[    3.150566] usbcore: registered new interface driver hub
[    3.179089] usbcore: registered new device driver usb
[    3.180662] sis900.c: v1.08.10 Apr. 2 2006
[    3.180732] ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 19 (level, low) -> IRQ 16
[    3.181678] 0000:00:04.0: Unknown PHY transceiver found at address 0.
[    3.182351] 0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1.
[    3.183033] 0000:00:04.0: Unknown PHY transceiver found at address 2.
[    3.183704] 0000:00:04.0: Unknown PHY transceiver found at address 3.
[    3.184376] 0000:00:04.0: Unknown PHY transceiver found at address 4.
[    3.185061] 0000:00:04.0: Unknown PHY transceiver found at address 5.
[    3.185768] 0000:00:04.0: Unknown PHY transceiver found at address 6.
[    3.186629] 0000:00:04.0: Unknown PHY transceiver found at address 7.
[    3.187454] 0000:00:04.0: Unknown PHY transceiver found at address 8.
[    3.188137] 0000:00:04.0: Unknown PHY transceiver found at address 9.
[    3.188821] 0000:00:04.0: Unknown PHY transceiver found at address 10.
[    3.189497] 0000:00:04.0: Unknown PHY transceiver found at address 11.
[    3.190180] 0000:00:04.0: Unknown PHY transceiver found at address 12.
[    3.190856] 0000:00:04.0: Unknown PHY transceiver found at address 13.
[    3.191529] 0000:00:04.0: Unknown PHY transceiver found at address 14.
[    3.192202] 0000:00:04.0: Unknown PHY transceiver found at address 15.
[    3.192874] 0000:00:04.0: Unknown PHY transceiver found at address 16.
[    3.193547] 0000:00:04.0: Unknown PHY transceiver found at address 17.
[    3.194220] 0000:00:04.0: Unknown PHY transceiver found at address 18.
[    3.194895] 0000:00:04.0: Unknown PHY transceiver found at address 19.
[    3.195569] 0000:00:04.0: Unknown PHY transceiver found at address 20.
[    3.196339] 0000:00:04.0: Unknown PHY transceiver found at address 21.
[    3.197101] 0000:00:04.0: Unknown PHY transceiver found at address 22.
[    3.197784] 0000:00:04.0: Unknown PHY transceiver found at address 23.
[    3.198466] 0000:00:04.0: Unknown PHY transceiver found at address 24.
[    3.199148] 0000:00:04.0: Unknown PHY transceiver found at address 25.
[    3.199826] 0000:00:04.0: Unknown PHY transceiver found at address 26.
[    3.200498] 0000:00:04.0: Unknown PHY transceiver found at address 27.
[    3.201168] 0000:00:04.0: Unknown PHY transceiver found at address 28.
[    3.201840] 0000:00:04.0: Unknown PHY transceiver found at address 29.
[    3.202511] 0000:00:04.0: Unknown PHY transceiver found at address 30.
[    3.203187] 0000:00:04.0: Unknown PHY transceiver found at address 31.
[    3.224899] 0000:00:04.0: Using transceiver found at address 1 as default
[    3.225857] eth0: SiS 900 PCI Fast Ethernet at 0xb000, IRQ 16, 00:11:5b:3e:57:56.
[    3.230908] ACPI: PCI Interrupt 0000:00:03.3[D] -> GSI 23 (level, low) -> IRQ 17
[    3.230929] ehci_hcd 0000:00:03.3: EHCI Host Controller
[    3.231100] ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1
[    3.231138] PCI: cache line size of 128 is not supported by device 0000:00:03.3
[    3.231152] ehci_hcd 0000:00:03.3: irq 17, io mem 0xe3011000
[    3.231162] ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[    3.231289] usb usb1: configuration #1 chosen from 1 choice
[    3.231329] hub 1-0:1.0: USB hub found
[    3.231338] hub 1-0:1.0: 8 ports detected
[    3.232849] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[    3.275684] Floppy drive(s): fd0 is 1.44M
[    3.299042] SCSI subsystem initialized
[    3.307989] libata version 2.20 loaded.
[    3.330565] FDC 0 is a post-1991 82077
[    3.338920] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 18
[    3.338952] ohci_hcd 0000:00:03.0: OHCI Host Controller
[    3.338989] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
[    3.339011] ohci_hcd 0000:00:03.0: irq 18, io mem 0xe3013000
[    3.400646] usb usb2: configuration #1 chosen from 1 choice
[    3.400692] hub 2-0:1.0: USB hub found
[    3.400709] hub 2-0:1.0: 3 ports detected
[    3.506489] ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 21 (level, low) -> IRQ 19
[    3.506516] ohci_hcd 0000:00:03.1: OHCI Host Controller
[    3.506560] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3
[    3.506582] ohci_hcd 0000:00:03.1: irq 19, io mem 0xe3015000
[    3.568336] usb usb3: configuration #1 chosen from 1 choice
[    3.568377] hub 3-0:1.0: USB hub found
[    3.568390] hub 3-0:1.0: 3 ports detected
[    3.674211] ACPI: PCI Interrupt 0000:00:03.2[C] -> GSI 22 (level, low) -> IRQ 20
[    3.674237] ohci_hcd 0000:00:03.2: OHCI Host Controller
[    3.674280] ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 4
[    3.674300] ohci_hcd 0000:00:03.2: irq 20, io mem 0xe3010000
[    3.736076] usb usb4: configuration #1 chosen from 1 choice
[    3.736120] hub 4-0:1.0: USB hub found
[    3.736134] hub 4-0:1.0: 2 ports detected
[    3.847077] pata_sis 0000:00:02.5: version 0.5.1
[    3.847165] ACPI: PCI Interrupt 0000:00:02.5[A] -> GSI 16 (level, low) -> IRQ 21
[    3.847336] ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00014000 irq 14
[    3.847402] ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x00014008 irq 15
[    3.847435] scsi0 : pata_sis
[    4.013513] usb 2-2: new low speed USB device using ohci_hcd and address 2
[    4.018025] ata1.00: ata_hpa_resize 1: sectors = 160086528, hpa_sectors = 160086528
[    4.018030] ata1.00: ATA-7: Maxtor 6Y080L0, YAR41BW0, max UDMA/133
[    4.018033] ata1.00: 160086528 sectors, multi 16: LBA 
[    4.029994] ata1.00: ata_hpa_resize 1: sectors = 160086528, hpa_sectors = 160086528
[    4.029997] ata1.00: configured for UDMA/133
[    4.049446] scsi1 : pata_sis
[    4.218158] usb 2-2: configuration #1 chosen from 1 choice
[    4.524683] usb 4-2: new full speed USB device using ohci_hcd and address 2
[    4.548982] ata2.00: ATAPI, max UDMA/33
[    4.548986] ata2.01: ATAPI, max UDMA/33
[    4.716703] ata2.00: configured for UDMA/33
[    4.735298] usb 4-2: configuration #1 chosen from 1 choice
[    4.738505] usbcore: registered new interface driver hiddev
[    4.748480] input: Logitech Optical USB Mouse as /class/input/input2
[    4.748523] input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:03.0-2
[    4.748558] usbcore: registered new interface driver usbhid
[    4.748564] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[    4.888452] ata2.01: configured for UDMA/33
[    4.888625] scsi 0:0:0:0: Direct-Access     ATA      Maxtor 6Y080L0   YAR4 PQ: 0 ANSI: 5
[    4.892533] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-4163B A102 PQ: 0 ANSI: 5
[    4.892924] scsi 1:0:1:0: CD-ROM            SAMSUNG  DVD-ROM SD-612S  sf03 PQ: 0 ANSI: 5
[    4.894981] sata_sis 0000:00:05.0: version 0.7
[    4.895021] ACPI: PCI Interrupt 0000:00:05.0[A] -> GSI 17 (level, low) -> IRQ 22
[    4.895040] sata_sis 0000:00:05.0: Detected SiS 180/181/964 chipset in SATA mode
[    4.895104] ata3: SATA max UDMA/133 cmd 0x0001b400 ctl 0x0001b802 bmdma 0x0001c400 irq 22
[    4.895173] ata4: SATA max UDMA/133 cmd 0x0001bc00 ctl 0x0001c002 bmdma 0x0001c408 irq 22
[    4.895195] scsi2 : sata_sis
[    5.207591] ata3: SATA link down (SStatus 0 SControl 300)
[    5.217734] ATA: abnormal status 0x7F on port 0x0001b407
[    5.217775] scsi3 : sata_sis
[    5.531073] ata4: SATA link down (SStatus 0 SControl 300)
[    5.541217] ATA: abnormal status 0x7F on port 0x0001bc07
[    5.561618] SCSI device sda: 160086528 512-byte hdwr sectors (81964 MB)
[    5.561646] sda: Write Protect is off
[    5.561650] sda: Mode Sense: 00 3a 00 00
[    5.561680] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.561814] SCSI device sda: 160086528 512-byte hdwr sectors (81964 MB)
[    5.561836] sda: Write Protect is off
[    5.561841] sda: Mode Sense: 00 3a 00 00
[    5.561876] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.561883]  sda: sda1 sda2 sda3
[    5.593255] sd 0:0:0:0: Attached scsi disk sda
[    5.598117] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    5.598153] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    5.598181] scsi 1:0:1:0: Attached scsi generic sg2 type 5
[    5.616106] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[    5.616114] Uniform CD-ROM driver Revision: 3.20
[    5.616196] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    5.619605] sr1: scsi3-mmc drive: 1x/40x cd/rw xa/form2 cdda tray
[    5.619653] sr 1:0:1:0: Attached scsi CD-ROM sr1
[    5.882909] Attempting manual resume
[    5.882914] swsusp: Resume From Partition 8:2
[    5.882916] PM: Checking swsusp image.
[    5.891924] PM: Resume from disk failed.
[    5.921453] kjournald starting.  Commit interval 5 seconds
[    5.921464] EXT3-fs: mounted filesystem with ordered data mode.
[   15.505336] eth0: Media Link Off
[   17.038612] NET: Registered protocol family 17
[   17.106507] Linux video capture interface: v2.00
[   17.494534] input: PC Speaker as /class/input/input3
[   17.558059] Linux agpgart interface v0.102 (c) Dave Jones
[   17.692313] parport: PnPBIOS parport detected.
[   17.692389] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[   17.711292] agpgart: Detected SiS 648 chipset
[   17.728913] agpgart: AGP aperture is 256M @ 0xc0000000
[   17.737839] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   17.881708] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   17.905197] saa7130/34: v4l2 driver version 0.2.14 loaded
[   17.905293] ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 17 (level, low) -> IRQ 22
[   17.905307] saa7134[0]: found at 0000:00:09.0, rev: 1, irq: 22, latency: 32, mmio: 0xe3014000
[   17.905316] saa7134[0]: subsystem: 11bd:002b, board: Pinnacle PCTV Stereo (saa7134) [card=26,autodetected]
[   17.905329] saa7134[0]: board init: gpio is 0
[   18.050808] saa7134[0]: i2c eeprom 00: bd 11 2b 00 f8 f8 1c 00 43 43 a9 1c 55 d2 b2 92
[   18.050826] saa7134[0]: i2c eeprom 10: 00 00 19 0e ff 20 ff ff ff ff ff ff ff ff ff ff
[   18.050842] saa7134[0]: i2c eeprom 20: 01 40 01 03 03 ff 03 01 08 ff 00 53 ff ff ff ff
[   18.050858] saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   18.050874] saa7134[0]: i2c eeprom 40: ff 07 00 c0 86 ff 01 01 ff ff ff ff ff ff ff ff
[   18.050889] saa7134[0]: i2c eeprom 50: 0c 22 17 0c 02 11 9a be ff ff ff ff ff ff ff ff
[   18.050905] saa7134[0]: i2c eeprom 60: 03 03 19 71 fb ff ff ff ff ff ff ff ff ff ff ff
[   18.050921] saa7134[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   18.134691] tuner 0-0043: chip found @ 0x86 (saa7134[0])
[   18.134758] tda9887 0-0043: tda988[5/6/7] found @ 0x43 (tuner)
[   18.139647] usbcore: registered new interface driver snd-usb-audio
[   18.186611] tuner 0-0060: Chip ID is not zero. It is not a TEA5767
[   18.186619] tuner 0-0060: chip found @ 0xc0 (saa7134[0])
[   18.206555] tuner 0-0060: microtune: companycode=3cbf part=42 rev=2f
[   18.238506] tuner 0-0060: microtune MT2050 found, OK
[   18.258470] tuner 0-0060: microtune: companycode=3cbf part=42 rev=2f
[   18.290407] tuner 0-0060: microtune MT2050 found, OK
[   18.293051] saa7134[0]: registered device video0 [v4l2]
[   18.293083] saa7134[0]: registered device vbi0
[   18.293180] ACPI: PCI Interrupt 0000:00:02.7[C] -> GSI 18 (level, low) -> IRQ 23
[   18.317602] saa7134 ALSA driver for DMA sound loaded
[   18.317648] saa7134[0]/alsa: saa7134[0] at 0xe3014000 irq 22 registered as card -2
[   18.613884] intel8x0_measure_ac97_clock: measured 58851 usecs
[   18.613889] intel8x0: clocking to 48000
[   18.753882] fuse init (API version 7.8)
[   18.785933] lp0: using parport0 (interrupt-driven).
[   18.820911] Adding 562264k swap on /dev/disk/by-uuid/55729517-b45a-42e8-b8f5-27ac32ee8d3a.  Priority:-1 extents:1 across:562264k
[   18.957555] EXT3 FS on sda3, internal journal
[   24.689851] Using specific hotkey driver
[   24.751866] No dock devices found.
[   24.918742] input: Power Button (FF) as /class/input/input4
[   24.918784] ACPI: Power Button (FF) [PWRF]
[   24.918846] input: Power Button (CM) as /class/input/input5
[   24.918874] ACPI: Power Button (CM) [PWRB]
[   24.918923] input: Sleep Button (CM) as /class/input/input6
[   24.918959] ACPI: Sleep Button (CM) [FUTS]
[   25.010296] ibm_acpi: ec object not found
[   25.138092] pcc_acpi: loading...
[   30.352540] [drm] Initialized drm 1.1.0 20060810
[   30.365615] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 21
[   30.365725] [drm] Initialized radeon 1.25.0 20060524 on minor 0
[   32.104318] ppdev: user-space parallel port driver
[   33.034774] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
[   33.034810] agpgart: Putting AGP V3 device at 0000:00:00.0 into 4x mode
[   33.034816] agpgart: SiS delay workaround: giving bridge time to recover.
[   33.050650] agpgart: Putting AGP V3 device at 0000:01:00.0 into 4x mode
[   33.092722] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[   33.092731] apm: disabled - APM is not SMP safe.
[   33.293712] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   33.385119] [drm] Setting GART location based on new memory map
[   33.385133] [drm] Loading R200 Microcode
[   33.385185] [drm] writeback test succeeded in 1 usecs
[   33.454021] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[   33.468616] NFSD: starting 90-second grace period
[   34.843640] Bluetooth: Core ver 2.11
[   34.843857] NET: Registered protocol family 31
[   34.843862] Bluetooth: HCI device and connection manager initialized
[   34.843867] Bluetooth: HCI socket layer initialized
[   34.879788] Bluetooth: L2CAP ver 2.8
[   34.879798] Bluetooth: L2CAP socket layer initialized
[   35.130158] Bluetooth: RFCOMM socket layer initialized
[   35.130304] Bluetooth: RFCOMM TTY layer initialized
[   35.130309] Bluetooth: RFCOMM ver 1.8
[   45.665888] NET: Registered protocol family 10
[   45.666047] lo: Disabled Privacy Extensions
[   45.666137] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  235.890365] usb 3-2: new full speed USB device using ohci_hcd and address 2
[  236.106073] usb 3-2: configuration #1 chosen from 1 choice
[  238.223192] usbcore: registered new interface driver cxacru
[  238.316391] cxacru 3-2:1.0: firmware (cxacru-fw.bin) unavailable (system misconfigured?)

In particolare le ultime 4 righe del secondo dmesg mi fanno supporre che la soluzione possa essere la stessa, ma nn vorrei fare danni con nautilos quindi aspetto un vostro parere.

mistermax80

Si il problema è lo stesso...

FregTuX ha scritto: Scarica il cxacru-fw.bin che ti ho uppato da qui:

http://rapidshare.de/files/38341339/cxacru-fw.bin.html

Poi dando:
Codice: Seleziona tutto
sudo nautilus
metti questo file in /lib/firmware, quindi riavvia.

Dovresti risolvere ogni problema

Segui questo post e vai tranquillo...

Forum Ubuntu-it

[Risolto] [Internet] All'accensione il modem usb non ha linea adsl,poi riavviand

[Risolto] [Internet] All'accensione il modem usb non ha linea adsl,poi riavviand

Re: [Internet] All'accensione il modem usb non ha linea adsl,poi riavviando con

Re: [Internet] All'accensione il modem usb non ha linea adsl,poi riavviando con

Re: [Internet] All'accensione il modem usb non ha linea adsl,poi riavviando con

Re: [Internet] All'accensione il modem usb non ha linea adsl,poi riavviando con

Re: [Internet] All'accensione il modem usb non ha linea adsl,poi riavviando con

Re: [Internet] All'accensione il modem usb non ha linea adsl,poi riavviando con

Re: [Internet] All'accensione il modem usb non ha linea adsl,poi riavviando con

Re: [Internet] All'accensione il modem usb non ha linea adsl,poi riavviando con

Re: [Internet] All'accensione il modem usb non ha linea adsl,poi riavviando con

Re: [Internet] All'accensione il modem usb non ha linea adsl,poi riavviando con

Re: [Internet] All'accensione il modem usb non ha linea adsl,poi riavviando con

Re: [Internet] All'accensione il modem usb non ha linea adsl,poi riavviando con

Re: [Internet] All'accensione il modem usb non ha linea adsl,poi riavviando con

Re: [Internet] All'accensione il modem usb non ha linea adsl,poi riavviando con

Re: [Internet] All'accensione il modem usb non ha linea adsl,poi riavviando con

Re: [Risolto] [Internet] All'accensione il modem usb non ha linea adsl,poi riavv

Re: [Risolto] [Internet] All'accensione il modem usb non ha linea adsl,poi riavv

Re: [Risolto] [Internet] All'accensione il modem usb non ha linea adsl,poi riavv

Re: [Risolto] [Internet] All'accensione il modem usb non ha linea adsl,poi riavv

Chi c’è in linea

Accedi • Iscriviti