Ciao a tutti.
Ho da poco installato la 7.10 ed i vari problemi avuti li ho sempre risolti leggendo nei vari forum.
Ora però non trovo proprio la soluzione: il masterizzatore DVD Philips 1640 non ne vuole sapere di
funzionare, o meglio di masterizzare.
Ho provato con K3b e con Brasero ma niente da fare.
Posto quindi l'errore ottenuto con K3b sperando nel vostro aiuto.
Ciao e Grazie. >:(
System
-----------------------
K3b Version: 1.0.4
KDE Version: 3.5.8
QT Version: 3.3.7
Kernel: 2.6.22-14-generic
Devices
-----------------------
LG DVD-ROM DRD8160B 1.01 (/dev/hdc, ) [CD-ROM, DVD-ROM] [DVD-ROM, CD-ROM] [Nessuno]
PHILIPS DVDR1640P P3.4 (/dev/hdd, ) [CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD+R, DVD+RW, DVD+R DL] [DVD-ROM, DVD-R sequenziale, DVD-RW sequenziale, DVD+RW, DVD+R, DVD+R a doppio strato, CD-ROM, CD-R, CD-RW] [TAO, Riscrittura limitata]
Used versions
-----------------------
cdrecord: 1.1.6
cdrecord command:
-----------------------
/usr/bin/wodim -v gracetime=2 dev=/dev/hdd speed=4 -tao driveropts=burnfree -eject blank=fast -force
cdrecord
-----------------------
/usr/bin/wodim: Operation not permitted. Warning: Cannot raise RLIMIT_MEMLOCK limits.scsidev: '/dev/hdd'
devname: '/dev/hdd'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.6
SCSI buffer size: 64512
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
TOC Type: 1 = CD-ROM
Driveropts: 'burnfree'
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'PHILIPS '
Identification : 'DVDR1640P '
Revision : 'P3.4'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x000A (CD-RW)
Profile: 0x002B (DVD+R/DL)
Profile: 0x001B (DVD+R)
Profile: 0x001A (DVD+RW)
Profile: 0x0014 (DVD-RW sequential recording)
Profile: 0x0011 (DVD-R sequential recording)
Profile: 0x0010 (DVD-ROM)
Profile: 0x000A (CD-RW) (current)
Profile: 0x0009 (CD-R)
Profile: 0x0008 (CD-ROM)
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: PACKET RAW/R16 RAW/R96R
Drive buf size : 1073152 = 1048 KB
/usr/bin/wodim: Cannot init drive.
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 5
Reference speed: 2
Is unrestricted
Is erasable
ATIP start of lead in: -12900 (97:10/00)
ATIP start of lead out: 359849 (79:59/74)
1T speed low: 0 (reserved val 0) 1T speed high: 4
2T speed low: 0 (reserved val 5) 2T speed high: 0 (reserved val 12)
power mult factor: 4 5
recommended erase/write power: 3
A1 values: 02 4A B0
A2 values: 5C C6 26
Disk type: unknown dye (reserved id code)
Manuf. index: -1
Manufacturer: unknown (not in table)
Manufacturer is unknown because of the orange forum embargo.
As the orange forum likes to get money for recent information,
it may be that this media does not use illegal manufacturer coding.
Philips 1640 non masterizza
-
geronimo62
- Prode Principiante
- Messaggi: 30
- Iscrizione: venerdì 18 gennaio 2008, 0:00
-
geronimo62
- Prode Principiante
- Messaggi: 30
- Iscrizione: venerdì 18 gennaio 2008, 0:00
Re: Philips 1640 non masterizza
Scusate, c'è qualcuno che mi possa aiutare?geronimo62 ha scritto: Ciao a tutti.
Ho da poco installato la 7.10 ed i vari problemi avuti li ho sempre risolti leggendo nei vari forum.
Ora però non trovo proprio la soluzione: il masterizzatore DVD Philips 1640 non ne vuole sapere di
funzionare, o meglio di masterizzare.
Ho provato con K3b e con Brasero ma niente da fare.
Posto quindi l'errore ottenuto con K3b sperando nel vostro aiuto.
Ciao e Grazie. >:(
System
-----------------------
K3b Version: 1.0.4
KDE Version: 3.5.8
QT Version: 3.3.7
Kernel: 2.6.22-14-generic
Devices
-----------------------
LG DVD-ROM DRD8160B 1.01 (/dev/hdc, ) [CD-ROM, DVD-ROM] [DVD-ROM, CD-ROM] [Nessuno]
PHILIPS DVDR1640P P3.4 (/dev/hdd, ) [CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD+R, DVD+RW, DVD+R DL] [DVD-ROM, DVD-R sequenziale, DVD-RW sequenziale, DVD+RW, DVD+R, DVD+R a doppio strato, CD-ROM, CD-R, CD-RW] [TAO, Riscrittura limitata]
Used versions
-----------------------
cdrecord: 1.1.6
cdrecord command:
-----------------------
/usr/bin/wodim -v gracetime=2 dev=/dev/hdd speed=4 -tao driveropts=burnfree -eject blank=fast -force
cdrecord
-----------------------
/usr/bin/wodim: Operation not permitted. Warning: Cannot raise RLIMIT_MEMLOCK limits.scsidev: '/dev/hdd'
devname: '/dev/hdd'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.6
SCSI buffer size: 64512
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
TOC Type: 1 = CD-ROM
Driveropts: 'burnfree'
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'PHILIPS '
Identification : 'DVDR1640P '
Revision : 'P3.4'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x000A (CD-RW)
Profile: 0x002B (DVD+R/DL)
Profile: 0x001B (DVD+R)
Profile: 0x001A (DVD+RW)
Profile: 0x0014 (DVD-RW sequential recording)
Profile: 0x0011 (DVD-R sequential recording)
Profile: 0x0010 (DVD-ROM)
Profile: 0x000A (CD-RW) (current)
Profile: 0x0009 (CD-R)
Profile: 0x0008 (CD-ROM)
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: PACKET RAW/R16 RAW/R96R
Drive buf size : 1073152 = 1048 KB
/usr/bin/wodim: Cannot init drive.
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 5
Reference speed: 2
Is unrestricted
Is erasable
ATIP start of lead in: -12900 (97:10/00)
ATIP start of lead out: 359849 (79:59/74)
1T speed low: 0 (reserved val 0) 1T speed high: 4
2T speed low: 0 (reserved val 5) 2T speed high: 0 (reserved val 12)
power mult factor: 4 5
recommended erase/write power: 3
A1 values: 02 4A B0
A2 values: 5C C6 26
Disk type: unknown dye (reserved id code)
Manuf. index: -1
Manufacturer: unknown (not in table)
Manufacturer is unknown because of the orange forum embargo.
As the orange forum likes to get money for recent information,
it may be that this media does not use illegal manufacturer coding.
-
geronimo62
- Prode Principiante
- Messaggi: 30
- Iscrizione: venerdì 18 gennaio 2008, 0:00
Re: Philips 1640 non masterizza
Scusate, non c'è nessuno che mi possa aiutare?geronimo62 ha scritto: Ciao a tutti.
Ho da poco installato la 7.10 ed i vari problemi avuti li ho sempre risolti leggendo nei vari forum.
Ora però non trovo proprio la soluzione: il masterizzatore DVD Philips 1640 non ne vuole sapere di
funzionare, o meglio di masterizzare.
Ho provato con K3b e con Brasero ma niente da fare.
Posto quindi l'errore ottenuto con K3b sperando nel vostro aiuto.
Ciao e Grazie. >:(
System
-----------------------
K3b Version: 1.0.4
KDE Version: 3.5.8
QT Version: 3.3.7
Kernel: 2.6.22-14-generic
Devices
-----------------------
LG DVD-ROM DRD8160B 1.01 (/dev/hdc, ) [CD-ROM, DVD-ROM] [DVD-ROM, CD-ROM] [Nessuno]
PHILIPS DVDR1640P P3.4 (/dev/hdd, ) [CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD+R, DVD+RW, DVD+R DL] [DVD-ROM, DVD-R sequenziale, DVD-RW sequenziale, DVD+RW, DVD+R, DVD+R a doppio strato, CD-ROM, CD-R, CD-RW] [TAO, Riscrittura limitata]
Used versions
-----------------------
cdrecord: 1.1.6
cdrecord command:
-----------------------
/usr/bin/wodim -v gracetime=2 dev=/dev/hdd speed=4 -tao driveropts=burnfree -eject blank=fast -force
cdrecord
-----------------------
/usr/bin/wodim: Operation not permitted. Warning: Cannot raise RLIMIT_MEMLOCK limits.scsidev: '/dev/hdd'
devname: '/dev/hdd'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.6
SCSI buffer size: 64512
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
TOC Type: 1 = CD-ROM
Driveropts: 'burnfree'
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'PHILIPS '
Identification : 'DVDR1640P '
Revision : 'P3.4'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x000A (CD-RW)
Profile: 0x002B (DVD+R/DL)
Profile: 0x001B (DVD+R)
Profile: 0x001A (DVD+RW)
Profile: 0x0014 (DVD-RW sequential recording)
Profile: 0x0011 (DVD-R sequential recording)
Profile: 0x0010 (DVD-ROM)
Profile: 0x000A (CD-RW) (current)
Profile: 0x0009 (CD-R)
Profile: 0x0008 (CD-ROM)
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: PACKET RAW/R16 RAW/R96R
Drive buf size : 1073152 = 1048 KB
/usr/bin/wodim: Cannot init drive.
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 5
Reference speed: 2
Is unrestricted
Is erasable
ATIP start of lead in: -12900 (97:10/00)
ATIP start of lead out: 359849 (79:59/74)
1T speed low: 0 (reserved val 0) 1T speed high: 4
2T speed low: 0 (reserved val 5) 2T speed high: 0 (reserved val 12)
power mult factor: 4 5
recommended erase/write power: 3
A1 values: 02 4A B0
A2 values: 5C C6 26
Disk type: unknown dye (reserved id code)
Manuf. index: -1
Manufacturer: unknown (not in table)
Manufacturer is unknown because of the orange forum embargo.
As the orange forum likes to get money for recent information,
it may be that this media does not use illegal manufacturer coding.
Sono stanco di cambiare S.O. ogni volta che devo masterizzare!
Grazie
-
geronimo62
- Prode Principiante
- Messaggi: 30
- Iscrizione: venerdì 18 gennaio 2008, 0:00
Re: Philips 1640 non masterizza
Non c'è proprio nessuno che possa darmi una risposta?
-
geronimo62
- Prode Principiante
- Messaggi: 30
- Iscrizione: venerdì 18 gennaio 2008, 0:00
Re: Philips 1640 non masterizza
Riposto ancora sperando in un aiuto.
-
geronimo62
- Prode Principiante
- Messaggi: 30
- Iscrizione: venerdì 18 gennaio 2008, 0:00
Re: Philips 1640 non masterizza
Scusate ancora, ma non riesco a masterizzare!!! >:(
-
geronimo62
- Prode Principiante
- Messaggi: 30
- Iscrizione: venerdì 18 gennaio 2008, 0:00
Re: Philips 1640 non masterizza
....Non posso continuare ad utilizzare il pc senza masterizzatore.
Se non trovo una soluzione, credo proprio che dovrò desistere da utilizzare ubuntu......
Se non trovo una soluzione, credo proprio che dovrò desistere da utilizzare ubuntu......
Chi c’è in linea
Visualizzano questa sezione: 0 utenti iscritti e 6 ospiti