Codice: Seleziona tutto
k3b
DCOPClient::attachInternal. Attach failed Could not open network socket
DCOPClient::attachInternal. Attach failed Could not open network socket
kbuildsycoca running...
Reusing existing ksycoca
masoero@masoero-desktop:~$ kdecore (KAction): WARNING: KActionCollection::KActionCollection( QObject *parent, const char *name, KInstance *instance )
(K3bDevice::HalConnection) initializing HAL >= 0.5
Mapping udi /org/freedesktop/Hal/devices/storage_model_DVD_ROM_GDR8161B to device /dev/scd1
Mapping udi /org/freedesktop/Hal/devices/storage_model_CD_R/RW_SW_248B to device /dev/scd0
/dev/scd0 resolved to /dev/scd0
/dev/scd0 is block device (0)
/dev/scd0 seems to be cdrom
bus: 1, id: 0, lun: 0
(K3bDevice::Device) /dev/scd0: init()
(K3bDevice::Device) /dev/scd0 feature: CD Mastering
(K3bDevice::Device) /dev/scd0 feature: CD Track At Once
(K3bDevice::Device) /dev/scd0: dataLen: 60
(K3bDevice::Device) /dev/scd0: checking for TAO
(K3bDevice::Device) /dev/scd0: checking for SAO
(K3bDevice::Device) /dev/scd0: checking for SAO_R96P
(K3bDevice::ScsiCommand) failed:
command: MODE SELECT (55)
errorcode: 70
sense key: ILLEGAL REQUEST (5)
asc: 26
ascq: 0
(K3bDevice::Device) /dev/scd0: checking for SAO_R96R
(K3bDevice::Device) /dev/scd0: checking for RAW_R16
(K3bDevice::Device) /dev/scd0: checking for RAW_R96P
(K3bDevice::ScsiCommand) failed:
command: MODE SELECT (55)
errorcode: 70
sense key: ILLEGAL REQUEST (5)
asc: 26
ascq: 0
(K3bDevice::Device) /dev/scd0: checking for RAW_R96R
(K3bDevice::ScsiCommand) failed:
command: GET PERFORMANCE (ac)
errorcode: 70
sense key: ILLEGAL REQUEST (5)
asc: 24
ascq: 0
(K3bDevice::Device) /dev/scd0: GET PERFORMANCE length det failed.
(K3bDevice::Device) /dev/scd0: Number of supported write speeds via 2A: 8
(K3bDevice::Device) /dev/scd0 : 2822 KB/s
(K3bDevice::Device) /dev/scd0 : 2117 KB/s
(K3bDevice::Device) /dev/scd0 : 1764 KB/s
(K3bDevice::Device) /dev/scd0 : 1411 KB/s
(K3bDevice::Device) /dev/scd0 Invalid DVD speed: 706 KB/s
(K3bDevice::DeviceManager) setting current write speed of device /dev/scd0 to 0
/dev/scd1 resolved to /dev/scd1
/dev/scd1 is block device (1)
/dev/scd1 seems to be cdrom
bus: 1, id: 1, lun: 0
(K3bDevice::Device) /dev/scd1: init()
(K3bDevice::ScsiCommand) failed:
command: MODE SENSE (5a)
errorcode: 70
sense key: ILLEGAL REQUEST (5)
asc: 24
ascq: 0
(K3bDevice::Device) /dev/scd1: MODE SENSE length det failed.
(K3bDevice::ScsiCommand) failed:
command: MODE SENSE (5a)
errorcode: 70
sense key: ILLEGAL REQUEST (5)
asc: 24
ascq: 0
(K3bDevice::Device) /dev/scd1: MODE SENSE with real length 65535 failed.
(K3bDevice::Device) /dev/scd1: modeSense 0x05 failed!
(K3bDevice::Device) /dev/scd1: Cannot check write modes.
(K3bDevice::ScsiCommand) failed:
command: MODE SENSE (5a)
errorcode: 70
sense key: ILLEGAL REQUEST (5)
asc: 24
ascq: 0
(K3bDevice::Device) /dev/scd1: MODE SENSE length det failed.
(K3bDevice::ScsiCommand) failed:
command: MODE SENSE (5a)
errorcode: 70
sense key: ILLEGAL REQUEST (5)
asc: 24
ascq: 0
(K3bDevice::Device) /dev/scd1: MODE SENSE with real length 65535 failed.
/dev/scd0 resolved to /dev/scd0
(K3bDevice::DeviceManager) dev /dev/scd0 already found
/dev/scd1 resolved to /dev/scd1
(K3bDevice::DeviceManager) dev /dev/scd1 already found
(K3bDevice::DeviceManager) found config entry for devicetype: SAMSUNG CD-R/RW SW-248B
(K3bDevice::DeviceManager) found config entry for devicetype: HL-DT-ST DVD-ROM GDR8161B
Devices:
------------------------------
Blockdevice: /dev/scd0
Generic device:
Vendor: SAMSUNG
Description: CD-R/RW SW-248B
Version: R503
Write speed: 706
Profiles: CD-ROM, CD-R, CD-RW
Read Cap: CD-ROM, CD-R, CD-RW
Write Cap: CD-R, CD-RW
Writing modes: SAO, TAO, RAW, SAO/R96R, RAW/R16, RAW/R96R
Reader aliases: /dev/scd0
------------------------------
Blockdevice: /dev/scd1
Generic device:
Vendor: HL-DT-ST
Description: DVD-ROM GDR8161B
Version: 0102
Write speed: 0
Profiles: DVD-ROM, CD-ROM
Read Cap: DVD-ROM, CD-ROM
Write Cap: Errore
Writing modes: Nessuno
Reader aliases: /dev/scd1
------------------------------
kdecore (KAction): WARNING: KActionCollection::operator+=(): function is severely deprecated.
unix_connect: can't connect to server (unix:/home/masoero/.kde/socket-masoero-desktop/masoero-desktop-2e8b-47910224)
Launched ok, pid = 8077
There are already artsd objects registered, looking if they are active...
... cleaned 5 unused mcop global references.
OggS-SEEK: at 0 want 78328 got 68160 (diff-requested 78328)
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 20
Minor opcode: 0
Resource id: 0x340050d
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 20
Minor opcode: 0
Resource id: 0x340050d
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 18
Minor opcode: 0
Resource id: 0x340050d
OggS-SEEK: at 78400 want 520 got 0 (diff-requested -77880)
