hp pavilion dv6755el problemi audio e webcam

[black_swan]

Ciao a tutti, non riesco ad installare sul mio portatile la scheda audio e la webcam integrata! qualcuno riesce a risolvere questo problemone?
grazie

[Schwitzd]

dal modello suppongo che hai un intel integrata

prova ad aggiungere nel file /etc/modules

snd_hda_intel

e riavvia.... magari è sufficiente quello

[black_swan]

provo subito, la webcam è integrata del tipo Quanta Computer, Inc.

[black_swan]

non ci siamo ancora, non vuole sapere di andare ne la scheda audio ne la webcam.
ho letto a riguardo questo articolo, però è per pavilion precedenti al mio http://wiki.ubuntu-it.org/Hardware/Note ... avilion%29

la webcam è una Quanta Computer, Inc. mentre la acheda audio è una 00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03

[Naima]

Per l'audio hai letto la pagina della documentazione? http://wiki.ubuntu-it.org/Hardware/Audio/HdaIntel
Dovrebbe aiutarti a risolvere, come prima cosa installa come scritto lì il pacchetto linux-backports-modules-generic che per la tua scheda forse basta a risolvere, altrimenti ci sono altri metodi da poter provare

[black_swan]

ho già provato a fare quanto mi hai detto però non ho avuto i risultati sperati. Mi ha dato alcuni errori

Codice: Seleziona tutto

apollo@apollo-laptop:~/alsa/alsa-driver-1.0.9rc4a$ ./configure 
checking for gcc... gcc
checking for C compiler default output... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables... 
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ANSI C... none needed
checking for ranlib... ranlib
checking for a BSD-compatible install... /usr/bin/install -c
checking how to run the C preprocessor... gcc -E
checking for egrep... grep -E
checking for ANSI C header files... yes
checking for an ANSI C-conforming const... yes
checking for inline... inline
checking whether time.h and sys/time.h may both be included... yes
checking whether gcc needs -traditional... no
checking for current directory... /home/apollo/alsa/alsa-driver-1.0.9rc4a
checking cross compile... 
checking for directory with kernel source... /lib/modules/2.6.22-14-generic/build
checking for directory with kernel build... 
checking for kernel version... 0.0.0
checking for GCC version... Kernel compiler:  Used compiler: gcc (GCC) 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)

*** NO PREDEFINED KERNEL COMPILER IS DETECTED
*** Assuming the same compiler is used with the current system compiler.

*** Please make sure that the same compiler version was used for building kernel.

checking for built-in ALSA... "no"
checking for existing ALSA module... "yes"
checking for Red Hat kernel... "auto"
checking for Red Hat kernel... "no"
checking for SUSE kernel... "auto"
checking for SUSE kernel... "no"
checking to modify of kernel linux/kmod.h... "no"
checking for kernel linux/compiler.h... "yes"
checking for kernel linux/pm.h... "yes"
checking for kernel linux/spinlock.h... "yes"
checking for kernel linux/irq.h... "yes"
checking for kernel linux/threads.h... "yes"
checking for kernel linux/rwsem.h... "yes"
checking for kernel linux/gameport.h... "yes"
checking for kernel linux/devfs_fs_kernel.h... "no"
checking for kernel linux/highmem.h... "yes"
checking for kernel linux/workqueue.h... "yes"
Removing a dummy linux/workqueue.h.
checking for kernel linux/dma-mapping.h... "yes"
Removing a dummy linux/dma-mapping.h.
checking for kernel asm/hw_irq.h... "yes"
checking for kernel linux/device.h... "yes"
Removing a dummy linux/device.h.
checking for kernel linux/jiffies.h... "yes"
Removing a dummy linux/jiffies.h.
checking for kernel linux/compat.h... "yes"
Removing a dummy linux/compat.h.
checking for kernel linux/adb.h... "yes"
checking for kernel linux/cuda.h... "yes"
checking for kernel linux/pmu.h... "yes"
checking for kernel linux/moduleparam.h... "yes"
Removing a dummy linux/moduleparam.h.
checking for kernel linux/syscalls.h... "yes"
Removing a dummy linux/syscalls.h.
checking for kernel linux/firmware.h... "yes"
checking for exported symbol dump_stack... grep: /lib/modules/2.6.22-14-generic/build/kernel/ksyms.c: No such file or directory
"no"
checking for kernel module symbol versions... "yes"
checking for PCI support in kernel... "yes"
checking for I2C driver in kernel... module
checking for firmware loader... yes
checking for directory to store kernel modules... /lib/modules/0.0.0/misc
checking for verbose printk... on
checking for debug level... none
checking for processor type... i586
checking for i386 machine type... default
checking for SMP... "yes"
checking for ISA PnP driver in kernel... yes
checking for PnP driver in kernel... yes
checking for Kernel ISA-PnP support... "yes"
checking for strlcpy... "no"
checking for snprintf... "no"
checking for vsnprintf... "no"
checking for scnprintf... "no"
checking for sscanf... "no"
checking for vmalloc_to_page... "no"
checking for old kmod... "yes"
checking for PDE... "no"
checking for pci_set_consistent_dma_mask... "no"
checking for pci_dev_present... "no"
checking for msleep... "no"
checking for tty->count is the atomic type... "no"
checking for io_remap_pfn_range... "no"
checking for new io_remap_page_range... "no"
checking for kcalloc... "no"
checking for saved_config_space in pci_dev... "no"
checking for old kill_fasync... "no"
checking for dma_addr_t... "no"
checking for MUTEX macros... "no"
Removing local linux/pnp.h.
checking for driver version... 1.0.9rc4a
checking for sequencer support... yes
checking for OSS/Free emulation... yes
checking for RTC callback support in kernel... "no"
checking for HPET support... "yes"
checking for Procfs support... "yes"
checking for USB support... "yes"
checking for PC-Speaker hook... "no"
checking for kernel PCMCIA
checking for PCMCIA support... "yes"
checking for PC9800 support in kernel... "no"
checking for parallel port support... "yes"
checking for which soundcards to compile driver for... all
configure: creating ./config.status
config.status: creating version
config.status: creating Makefile.conf
config.status: creating snddevices
config.status: creating utils/alsa-driver.spec
config.status: creating utils/buildrpm
config.status: creating toplevel.config
config.status: creating utils/alsasound
config.status: creating utils/alsasound.posix
config.status: creating include/config.h
config.status: creating include/config1.h
config.status: creating include/version.h
config.status: include/version.h is unchanged
config.status: creating include/autoconf-extra.h
Hacking autoconf.h...
apollo@apollo-laptop:~/alsa/alsa-driver-1.0.9rc4a$ make
if [ ! -d include/sound -a ! -L include/sound ]; then \
          ln -sf ../alsa-kernel/include include/sound ; \
        fi
cp -auvf include/version.h include/sound/version.h
`include/version.h' -> `include/sound/version.h'
make[1]: Entering directory `/home/apollo/alsa/alsa-driver-1.0.9rc4a/acore'
gcc -D__KERNEL__ -DMODULE=1 -I/home/apollo/alsa/alsa-driver-1.0.9rc4a/include  -I/lib/modules/2.6.22-14-generic/build/include -I/lib/modules/2.6.22-14-generic/build/include/asm-i386/mach-default -O2 -mpreferred-stack-boundary=2 -march=i586 -D__SMP__ -DCONFIG_SMP -DLINUX -Wall -Wstrict-prototypes -fomit-frame-pointer -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common -pipe -DALSA_BUILD -nostdinc -iwithprefix include -DMODVERSIONS -include /lib/modules/2.6.22-14-generic/build/include/linux/modversions.h  -DKBUILD_BASENAME=hpetimer   -c -o hpetimer.o hpetimer.c
cc1: error: /lib/modules/2.6.22-14-generic/build/include/linux/modversions.h: Nessun file o directory
In file included from hpetimer.c:22:
/home/apollo/alsa/alsa-driver-1.0.9rc4a/include/sound/driver.h:29:26: error: linux/config.h: Nessun file o directory
In file included from /lib/modules/2.6.22-14-generic/build/include/asm/processor.h:22,
                 from /lib/modules/2.6.22-14-generic/build/include/asm/thread_info.h:16,
                 from /lib/modules/2.6.22-14-generic/build/include/linux/thread_info.h:21,
                 from /lib/modules/2.6.22-14-generic/build/include/linux/preempt.h:9,
                 from /lib/modules/2.6.22-14-generic/build/include/linux/spinlock.h:49,
                 from /lib/modules/2.6.22-14-generic/build/include/linux/module.h:9,
                 from /home/apollo/alsa/alsa-driver-1.0.9rc4a/include/adriver.h:45,
                 from /home/apollo/alsa/alsa-driver-1.0.9rc4a/include/sound/driver.h:42,
                 from hpetimer.c:22:
/lib/modules/2.6.22-14-generic/build/include/linux/cpumask.h:88: error: ‘CONFIG_NR_CPUS’ undeclared here (not in a function)
In file included from /lib/modules/2.6.22-14-generic/build/include/asm/thread_info.h:16,
                 from /lib/modules/2.6.22-14-generic/build/include/linux/thread_info.h:21,
                 from /lib/modules/2.6.22-14-generic/build/include/linux/preempt.h:9,
                 from /lib/modules/2.6.22-14-generic/build/include/linux/spinlock.h:49,
                 from /lib/modules/2.6.22-14-generic/build/include/linux/module.h:9,
                 from /home/apollo/alsa/alsa-driver-1.0.9rc4a/include/adriver.h:45,
                 from /home/apollo/alsa/alsa-driver-1.0.9rc4a/include/sound/driver.h:42,
                 from hpetimer.c:22:
/lib/modules/2.6.22-14-generic/build/include/asm/processor.h:83: error: ‘CONFIG_X86_L1_CACHE_SHIFT’ undeclared here (not in a function)
/lib/modules/2.6.22-14-generic/build/include/asm/processor.h:83: error: requested alignment is not a constant
/lib/modules/2.6.22-14-generic/build/include/asm/processor.h: In function ‘cpuid_count’:
/lib/modules/2.6.22-14-generic/build/include/asm/processor.h:618: warning: pointer targets in passing argument 1 of ‘native_cpuid’ differ in signedness
/lib/modules/2.6.22-14-generic/build/include/asm/processor.h:618: warning: pointer targets in passing argument 2 of ‘native_cpuid’ differ in signedness
/lib/modules/2.6.22-14-generic/build/include/asm/processor.h:618: warning: pointer targets in passing argument 3 of ‘native_cpuid’ differ in signedness
/lib/modules/2.6.22-14-generic/build/include/asm/processor.h:618: warning: pointer targets in passing argument 4 of ‘native_cpuid’ differ in signedness
In file included from /lib/modules/2.6.22-14-generic/build/include/linux/gfp.h:4,
                 from /lib/modules/2.6.22-14-generic/build/include/linux/slab.h:14,
                 from /lib/modules/2.6.22-14-generic/build/include/linux/percpu.h:5,
                 from /lib/modules/2.6.22-14-generic/build/include/asm/desc.h:11,
                 from /lib/modules/2.6.22-14-generic/build/include/asm/elf.h:50,
                 from /lib/modules/2.6.22-14-generic/build/include/linux/elf.h:7,
                 from /lib/modules/2.6.22-14-generic/build/include/linux/module.h:15,
                 from /home/apollo/alsa/alsa-driver-1.0.9rc4a/include/adriver.h:45,
                 from /home/apollo/alsa/alsa-driver-1.0.9rc4a/include/sound/driver.h:42,
                 from hpetimer.c:22:
/lib/modules/2.6.22-14-generic/build/include/linux/mmzone.h: At top level:
/lib/modules/2.6.22-14-generic/build/include/linux/mmzone.h:43: error: requested alignment is not a constant
/lib/modules/2.6.22-14-generic/build/include/linux/mmzone.h:93: error: requested alignment is not a constant
/lib/modules/2.6.22-14-generic/build/include/linux/mmzone.h:305: error: requested alignment is not a constant
In file included from /lib/modules/2.6.22-14-generic/build/include/linux/module.h:21,
                 from /home/apollo/alsa/alsa-driver-1.0.9rc4a/include/adriver.h:45,
                 from /home/apollo/alsa/alsa-driver-1.0.9rc4a/include/sound/driver.h:42,
                 from hpetimer.c:22:
/lib/modules/2.6.22-14-generic/build/include/asm/module.h:64:2: error: #error unknown processor family
In file included from /lib/modules/2.6.22-14-generic/build/include/linux/sched.h:51,
                 from /lib/modules/2.6.22-14-generic/build/include/asm/irq.h:13,
                 from /lib/modules/2.6.22-14-generic/build/include/linux/irq.h:23,
                 from /lib/modules/2.6.22-14-generic/build/include/asm/hardirq.h:5,
                 from /lib/modules/2.6.22-14-generic/build/include/linux/hardirq.h:7,
                 from /lib/modules/2.6.22-14-generic/build/include/linux/interrupt.h:11,
                 from hpetimer.c:26:
/lib/modules/2.6.22-14-generic/build/include/linux/jiffies.h:33:3: error: #error You lose.
/lib/modules/2.6.22-14-generic/build/include/linux/jiffies.h:225:31: error: division by zero in #if
/lib/modules/2.6.22-14-generic/build/include/linux/jiffies.h:225:31: error: division by zero in #if
/lib/modules/2.6.22-14-generic/build/include/linux/jiffies.h:225:31: error: division by zero in #if
/lib/modules/2.6.22-14-generic/build/include/linux/jiffies.h:225:31: error: division by zero in #if
/lib/modules/2.6.22-14-generic/build/include/linux/jiffies.h:225:31: error: division by zero in #if
/lib/modules/2.6.22-14-generic/build/include/linux/jiffies.h:225:31: error: division by zero in #if
/lib/modules/2.6.22-14-generic/build/include/linux/jiffies.h:225:31: error: division by zero in #if
/lib/modules/2.6.22-14-generic/build/include/linux/jiffies.h:225:31: error: division by zero in #if
/lib/modules/2.6.22-14-generic/build/include/linux/jiffies.h:225:31: error: division by zero in #if
/lib/modules/2.6.22-14-generic/build/include/linux/jiffies.h:225:31: error: division by zero in #if
/lib/modules/2.6.22-14-generic/build/include/linux/jiffies.h:225:31: error: division by zero in #if
/lib/modules/2.6.22-14-generic/build/include/linux/jiffies.h:225:31: error: division by zero in #if
/lib/modules/2.6.22-14-generic/build/include/linux/jiffies.h:225:31: error: division by zero in #if
/lib/modules/2.6.22-14-generic/build/include/linux/jiffies.h:225:31: error: division by zero in #if
/lib/modules/2.6.22-14-generic/build/include/linux/jiffies.h:225:31: error: division by zero in #if
/lib/modules/2.6.22-14-generic/build/include/linux/jiffies.h:225:31: error: division by zero in #if
In file included from /lib/modules/2.6.22-14-generic/build/include/linux/pid.h:4,
                 from /lib/modules/2.6.22-14-generic/build/include/linux/sched.h:72,
                 from /lib/modules/2.6.22-14-generic/build/include/asm/irq.h:13,
                 from /lib/modules/2.6.22-14-generic/build/include/linux/irq.h:23,
                 from /lib/modules/2.6.22-14-generic/build/include/asm/hardirq.h:5,
                 from /lib/modules/2.6.22-14-generic/build/include/linux/hardirq.h:7,
                 from /lib/modules/2.6.22-14-generic/build/include/linux/interrupt.h:11,
                 from hpetimer.c:26:
/lib/modules/2.6.22-14-generic/build/include/linux/rcupdate.h:71: error: requested alignment is not a constant
/lib/modules/2.6.22-14-generic/build/include/linux/rcupdate.h:74: error: requested alignment is not a constant
In file included from /lib/modules/2.6.22-14-generic/build/include/asm/hardirq.h:5,
                 from /lib/modules/2.6.22-14-generic/build/include/linux/hardirq.h:7,
                 from /lib/modules/2.6.22-14-generic/build/include/linux/interrupt.h:11,
                 from hpetimer.c:26:
/lib/modules/2.6.22-14-generic/build/include/linux/irq.h:176: error: requested alignment is not a constant
In file included from /lib/modules/2.6.22-14-generic/build/include/linux/hardirq.h:7,
                 from /lib/modules/2.6.22-14-generic/build/include/linux/interrupt.h:11,
                 from hpetimer.c:26:
/lib/modules/2.6.22-14-generic/build/include/asm/hardirq.h:12: error: requested alignment is not a constant
make[1]: *** [hpetimer.o] Error 1
make[1]: Leaving directory `/home/apollo/alsa/alsa-driver-1.0.9rc4a/acore'
make: *** [compile] Error 1
apollo@apollo-laptop:~/alsa/alsa-driver-1.0.9rc4a$ su
su           sudoedit     sum          suspend      
sudo         sulogin      superformat  
apollo@apollo-laptop:~/alsa/alsa-driver-1.0.9rc4a$ sudo ma
magnifier                    make-memtest86+-boot-floppy
mahjongg                     make_method
make                         make-ssl-cert
makedepend                   man
make_driver_db_cups          mandb
make_driver_db_lpr           manpath
makeg                        mawk
makekdewidgets               
apollo@apollo-laptop:~/alsa/alsa-driver-1.0.9rc4a$ sudo make install
^[[5~[sudo] password for apollo:
rm -f /lib/modules/0.0.0/misc/snd*.*o /lib/modules/0.0.0/misc/persist.o /lib/modules/0.0.0/misc/isapnp.o
make[1]: Entering directory `/home/apollo/alsa/alsa-driver-1.0.9rc4a/acore'
mkdir -p /lib/modules/0.0.0/misc
cp snd-hpet.o snd-hwdep.o snd-page-alloc.o snd-pcm.o snd-rawmidi.o snd-timer.o snd.o /lib/modules/0.0.0/misc
cp: impossibile fare stat di `snd-hpet.o': Nessun file o directory
cp: impossibile fare stat di `snd-hwdep.o': Nessun file o directory
cp: impossibile fare stat di `snd-page-alloc.o': Nessun file o directory
cp: impossibile fare stat di `snd-pcm.o': Nessun file o directory
cp: impossibile fare stat di `snd-rawmidi.o': Nessun file o directory
cp: impossibile fare stat di `snd-timer.o': Nessun file o directory
cp: impossibile fare stat di `snd.o': Nessun file o directory
make[1]: *** [_modinst__] Error 1
make[1]: Leaving directory `/home/apollo/alsa/alsa-driver-1.0.9rc4a/acore'
make: *** [install-modules] Error 1

[Naima]

Hai installato i pacchetti "build-essential" e "linux-headers"? Mi pare non trovi alcuni file.

Poi prima di indagare oltre sugli errori riprova con le versioni nuove dei driver, quelle che hai preso sono del 2005, devi prendere la 1.0.16.. (la trovi allo stesso indirizzo, ma per l'ordine alfabetico 1.0.9 viene dopo 1.0.16 quindi lo trovi circa a metà lista (controlla la data, il file deve essere del febbraio 2008 )

[black_swan]

si scusa tra le 1000 prove avevo ricompilato dei driver vecchi. Non ho visto però errori nella compilazione nei  nuovi.. il mistero si fa più intricato!
comincio a pensare che billy gate abbia voluto fare una scheda audio che vada solo con vista!

hai altri preziosi consigli? per la webcam?

[Naima]

Per la scheda se hai:

- compilato alsa nuovo

- controllato con

Codice: Seleziona tutto

alsamixer

che i volumi siano a posto

- provato ad aggiungere nel file /etc/modprobe.d/alsa-base una riga tipo

Codice: Seleziona tutto

options snd-hda-intel model=laptop

(puoi fare delle prove sostituendo a "laptop" altri parametri, ora non li ricordo tutti, mi pare ci siano "acer" "auto" e altri, magari domani con più calma te ne trovo altri)

Allora non mi viene in mente molto altro da consigliarti..  :-[ solo una cosa, se non funziona niente di tutto questo prova a postare il chip esatto che monta la tua scheda, lo trovi indicato in alsamixer, seconda riga in alto, che vediamo se per caso questa informazione in più aiuta.

Buona fortuna!

[black_swan]

grazie mille per l'aiuto ! il chip è Realtek ID 268. devo ancora fare le prove con il file che mi hai detto.. sta sera ti mando delle news..  (in alsamixer ci sono due voci hook e callerid ad off e non si riescono a cambiare! le altre sono tutte al massimo)

[Naima]

In questo topic c'è qualcuno con la tua stessa scheda che va risolto http://forum.ubuntu-it.org/viewtopic.php?t=154194

I passaggi sono quelli che già avevamo detto, cmq magari dai un occhio anche lì =P

[black_swan]

scusami ma non ne riesco proprio a venir fuori! sto sbagliando qualcosa?!? ho seguito passo passo tutte le indicazioni ma l'hp non vuole proprio parlare!
in alsamixer ci sono un paio di voci a off che non riesco a settare ad on! potrebbero essere queste?

[Naima]

in alsamixer ci sono un paio di voci a off che non riesco a settare ad on! potrebbero essere queste?

dipende da quali sono, controlla e scrivile magari.

Poi fai una cosa, ripetimi tutti i passaggi che hai fatto, se riesci dettagliati, a quanto ho capito hai:
- modificato il file modules
- installato alsa (che versione? hai seguito tutte le istruzioni del wiki installando sia driver che lib che utils?)
- modificato il file alsa-base (che parametri hai provato?)

Il tuo chip (il 268) era particolarmente capriccioso, ma son sicura si riesca a far andare, se ribecco l'amico che l'ha fatto qualche settimana fa gli chiedo se ha fatto altro

[black_swan]

ciao, ti scrivo mentre sto formattando! aimè seguendo una guida x risolvere il problema audio e riavviando non mi conpariva più l'ambiente grafico!

Cmq ecco lo storico:
1) scaricati i pacchetti 1.0.16 alsa driver lib e utils e scompattati
2) ./configure + sudo make + make install
3) inserita la riga options snd-hda-intel model=hp (e altre svariate sfumature tipo auto acer e toshiba) nel file /etc/modprobe.d/alsa-base (avevo inserito anche delle altre righe trovate su guide in internet e consigliate in topic del forum)
4) seguito una guida (che adesso non ho sottomano e non so nemmeno se la riesco a trovare) che mi aveva fatto disinstallare alsa e reinstallare.
5) ti sto riscrivendo di nuovo (grazie per la pazienza!)

[Naima]

Spero reinstallando il resto ti torni a posto (anche se non era necessario, si poteva probabilmente sistemare).

Quando avrai fatto riprova la procedura da capo.. Purtroppo non capisco come mai non funziona, i passi dovrebbero essere questi:
- controlla con

Codice: Seleziona tutto

alsamixer

che i volumi non siano a zero
- installa linux-backports-modules
- controlla con

Codice: Seleziona tutto

lsmod

se ti risulta caricato il modulo snd_hda_intel, altrimenti aggiungilo al file /etc/modules e riavvia

Se questo non serve passiamo oltre:
- scarica, scompatta ed installa i pacchetti 1.0.16 alsa driver lib e utils
- modifica il file /etc/modprobe.d/alsa-base aggiungendo la riga

Codice: Seleziona tutto

options snd-hda-intel model=hp

(o altri parametri da provare)

Altrimenti dovrebbero esistere anche i driver della tua scheda da scaricare ed installare dal sito, oppure delle opzioni nella compilazione di alsa ma ti confesso che non so se lo saprei fare  :-[

[black_swan]

sono di nuovo qua.. ho formattato e ho seguito questa parte del tuo post:

Spero reinstallando il resto ti torni a posto (anche se non era necessario, si poteva probabilmente sistemare).

Quando avrai fatto riprova la procedura da capo.. Purtroppo non capisco come mai non funziona, i passi dovrebbero essere questi:
- controlla con
Codice:
alsamixerche i volumi non siano a zero
- installa linux-backports-modules
- controlla con
Codice:
lsmodse ti risulta caricato il modulo snd_hda_intel, altrimenti aggiungilo al file /etc/modules e riavvia

ma niente audio e ubuntu mi è partito in modalità grafica minima (e non va il wireless).
l'unica nota è stata che è rimasta accesa la luce azzurra della scheda audio..
hai consigli senza dover riformattare?

[black_swan]

ho risolto i problemi della scheda video (il vecchio pc mi ha reso un esperto!), ma non riesco a far riandare il wireless (il gestore driver con restrizioni mi dice che il driver non è in uso (c'è un modo per riutilizzarli? sono già abilitati)
-----------------
ho scaricaro per l'ennesima volta i driver audio ma mi hanno dato questo errore:

Codice: Seleziona tutto

apollo@apollo-laptop:~/alsa$ cd alsa-driver-1.0.16/
apollo@apollo-laptop:~/alsa/alsa-driver-1.0.16$ ./configure 
checking for gcc... gcc
checking for C compiler default output file name... configure: error: C compiler cannot create executables
See `config.log' for more details.   

questo è quanto c'è dentro config.log:

Codice: Seleziona tutto

This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.

It was created by configure, which was
generated by GNU Autoconf 2.60.  Invocation command line was

  $ ./configure 

## --------- ##
## Platform. ##
## --------- ##

hostname = apollo-laptop
uname -m = i686
uname -r = 2.6.22-14-386
uname -s = Linux
uname -v = #1 Tue Feb 12 07:12:19 UTC 2008

/usr/bin/uname -p = unknown
/bin/uname -X     = unknown

/bin/arch              = unknown
/usr/bin/arch -k       = unknown
/usr/convex/getsysinfo = unknown
/usr/bin/hostinfo      = unknown
/bin/machine           = unknown
/usr/bin/oslevel       = unknown
/bin/universe          = unknown

PATH: /usr/local/sbin
PATH: /usr/local/bin
PATH: /usr/sbin
PATH: /usr/bin
PATH: /sbin
PATH: /bin
PATH: /usr/games


## ----------- ##
## Core tests. ##
## ----------- ##

configure:2101: checking for gcc
configure:2117: found /usr/bin/gcc
configure:2128: result: gcc
configure:2366: checking for C compiler version
configure:2373: gcc --version >&5
gcc (GCC) 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)
Copyright (C) 2006 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.  There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

configure:2376: $? = 0
configure:2383: gcc -v >&5
Using built-in specs.
Target: i486-linux-gnu
Configured with: ../src/configure -v --enable-languages=c,c++,fortran,objc,obj-c++,treelang --prefix=/usr --enable-shared --with-system-zlib --libexecdir=/usr/lib --without-included-gettext --enable-threads=posix --enable-nls --with-gxx-include-dir=/usr/include/c++/4.1.3 --program-suffix=-4.1 --enable-__cxa_atexit --enable-clocale=gnu --enable-libstdcxx-debug --enable-mpfr --enable-checking=release i486-linux-gnu
Thread model: posix
gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)
configure:2386: $? = 0
configure:2393: gcc -V >&5
gcc: '-V' option must have argument
configure:2396: $? = 1
configure:2419: checking for C compiler default output file name
configure:2446: gcc    conftest.c  >&5
/usr/bin/ld: crt1.o: No such file: No such file or directory
collect2: ld returned 1 exit status
configure:2449: $? = 1
configure: failed program was:
| /* confdefs.h.  */
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
| #define PACKAGE_BUGREPORT ""
| /* end confdefs.h.  */
| 
| int
| main ()
| {
| 
|   ;
|   return 0;
| }
configure:2488: error: C compiler cannot create executables
See `config.log' for more details.

## ---------------- ##
## Cache variables. ##
## ---------------- ##

ac_cv_env_CC_set=
ac_cv_env_CC_value=
ac_cv_env_CFLAGS_set=
ac_cv_env_CFLAGS_value=
ac_cv_env_CPPFLAGS_set=
ac_cv_env_CPPFLAGS_value=
ac_cv_env_CPP_set=
ac_cv_env_CPP_value=
ac_cv_env_LDFLAGS_set=
ac_cv_env_LDFLAGS_value=
ac_cv_env_build_alias_set=
ac_cv_env_build_alias_value=
ac_cv_env_host_alias_set=
ac_cv_env_host_alias_value=
ac_cv_env_target_alias_set=
ac_cv_env_target_alias_value=
ac_cv_prog_ac_ct_CC=gcc

## ----------------- ##
## Output variables. ##
## ----------------- ##

AR=''
ARCH=''
AS=''
CC='gcc'
CFLAGS=''
CONFIG_AC97_BUS=''
CONFIG_ALPHA=''
CONFIG_ARCH_AT91=''
CONFIG_ARCH_PXA=''
CONFIG_ARCH_S3C2410=''
CONFIG_ARCH_SA1100=''
CONFIG_ARM=''
CONFIG_ARM_AMBA=''
CONFIG_ATMEL_SSC=''
CONFIG_BROKEN=''
CONFIG_CPU_SUBTYPE_SH7760=''
CONFIG_EXPERIMENTAL=''
CONFIG_FW_LOADER=''
CONFIG_GSC=''
CONFIG_HAS_DMA=''
CONFIG_HAS_IOMEM=''
CONFIG_HAS_IOPORT=''
CONFIG_HIGH_RES_TIMERS=''
CONFIG_HPET=''
CONFIG_I2C=''
CONFIG_I2C_POWERMAC=''
CONFIG_I2C_SENSOR=''
CONFIG_INPUT=''
CONFIG_ISA=''
CONFIG_ISAPNP=''
CONFIG_ISAPNP_KERNEL=''
CONFIG_ISA_DMA_API=''
CONFIG_L3=''
CONFIG_MACH_E800=''
CONFIG_MACH_ETI_B1=''
CONFIG_MACH_ETI_C1=''
CONFIG_MACH_NEO1973_GTA01=''
CONFIG_MACH_POODLE=''
CONFIG_MACH_SMDK2443=''
CONFIG_MACH_TOSA=''
CONFIG_MIPS=''
CONFIG_MPC8610_HPCD=''
CONFIG_PARISC=''
CONFIG_PARPORT=''
CONFIG_PCI=''
CONFIG_PCMCIA=''
CONFIG_PM=''
CONFIG_PNP=''
CONFIG_PNP_KERNEL=''
CONFIG_PPC32=''
CONFIG_PPC64=''
CONFIG_PPC=''
CONFIG_PPC_PMAC=''
CONFIG_PROC_FS=''
CONFIG_PS3_PS3AV=''
CONFIG_PXA_SHARP_C7XX=''
CONFIG_PXA_SHARP_CXX00=''
CONFIG_RTC=''
CONFIG_SBUS=''
CONFIG_SGI=''
CONFIG_SH_DMABRG=''
CONFIG_SH_DREAMCAST=''
CONFIG_SND=''
CONFIG_SND_AC97_CODEC=''
CONFIG_SND_AC97_POWER_SAVE=''
CONFIG_SND_AC97_POWER_SAVE_DEFAULT=''
CONFIG_SND_AD1816A=''
CONFIG_SND_AD1848=''
CONFIG_SND_AD1848_LIB=''
CONFIG_SND_AD1889=''
CONFIG_SND_ADLIB=''
CONFIG_SND_AICA=''
CONFIG_SND_ALI5451=''
CONFIG_SND_ALS100=''
CONFIG_SND_ALS300=''
CONFIG_SND_ALS4000=''
CONFIG_SND_AOA=''
CONFIG_SND_AOA_FABRIC_LAYOUT=''
CONFIG_SND_AOA_ONYX=''
CONFIG_SND_AOA_SOUNDBUS=''
CONFIG_SND_AOA_SOUNDBUS_I2S=''
CONFIG_SND_AOA_TAS=''
CONFIG_SND_AOA_TOONIE=''
CONFIG_SND_ARMAACI=''
CONFIG_SND_ASIHPI=''
CONFIG_SND_AT73C213=''
CONFIG_SND_AT73C213_TARGET_BITRATE=''
CONFIG_SND_AT91_SOC=''
CONFIG_SND_AT91_SOC_ETI_B1_WM8731=''
CONFIG_SND_AT91_SOC_ETI_SLAVE=''
CONFIG_SND_AT91_SOC_SSC=''
CONFIG_SND_ATIIXP=''
CONFIG_SND_ATIIXP_MODEM=''
CONFIG_SND_AU1X00=''
CONFIG_SND_AU8810=''
CONFIG_SND_AU8820=''
CONFIG_SND_AU8830=''
CONFIG_SND_AZT2320=''
CONFIG_SND_AZT3328=''
CONFIG_SND_BIT32_EMUL=''
CONFIG_SND_BT87X=''
CONFIG_SND_BT87X_OVERCLOCK=''
CONFIG_SND_CA0106=''
CONFIG_SND_CMI8330=''
CONFIG_SND_CMIPCI=''
CONFIG_SND_CS4231=''
CONFIG_SND_CS4231_LIB=''
CONFIG_SND_CS4232=''
CONFIG_SND_CS4236=''
CONFIG_SND_CS4281=''
CONFIG_SND_CS46XX=''
CONFIG_SND_CS46XX_NEW_DSP=''
CONFIG_SND_CS5530=''
CONFIG_SND_CS5535AUDIO=''
CONFIG_SND_DARLA20=''
CONFIG_SND_DARLA24=''
CONFIG_SND_DATE=''
CONFIG_SND_DEBUG=''
CONFIG_SND_DEBUG_DETECT=''
CONFIG_SND_DEBUG_MEMORY=''
CONFIG_SND_DT019X=''
CONFIG_SND_DUMMY=''
CONFIG_SND_DYNAMIC_MINORS=''
CONFIG_SND_ECHO3G=''
CONFIG_SND_EMU10K1=''
CONFIG_SND_EMU10K1X=''
CONFIG_SND_ENS1370=''
CONFIG_SND_ENS1371=''
CONFIG_SND_ES1688=''
CONFIG_SND_ES18XX=''
CONFIG_SND_ES1938=''
CONFIG_SND_ES1968=''
CONFIG_SND_ES968=''
CONFIG_SND_FM801=''
CONFIG_SND_FM801_TEA575X=''
CONFIG_SND_FM801_TEA575X_BOOL=''
CONFIG_SND_GINA20=''
CONFIG_SND_GINA24=''
CONFIG_SND_GUSCLASSIC=''
CONFIG_SND_GUSEXTREME=''
CONFIG_SND_GUSMAX=''
CONFIG_SND_GUS_SYNTH=''
CONFIG_SND_HARMONY=''
CONFIG_SND_HDA_CODEC_ANALOG=''
CONFIG_SND_HDA_CODEC_ATIHDMI=''
CONFIG_SND_HDA_CODEC_CMEDIA=''
CONFIG_SND_HDA_CODEC_CONEXANT=''
CONFIG_SND_HDA_CODEC_REALTEK=''
CONFIG_SND_HDA_CODEC_SI3054=''
CONFIG_SND_HDA_CODEC_SIGMATEL=''
CONFIG_SND_HDA_CODEC_VIA=''
CONFIG_SND_HDA_GENERIC=''
CONFIG_SND_HDA_HWDEP=''
CONFIG_SND_HDA_INTEL=''
CONFIG_SND_HDA_POWER_SAVE=''
CONFIG_SND_HDA_POWER_SAVE_DEFAULT=''
CONFIG_SND_HDSP=''
CONFIG_SND_HDSPM=''
CONFIG_SND_HIFIER=''
CONFIG_SND_HPET=''
CONFIG_SND_HWDEP=''
CONFIG_SND_ICE1712=''
CONFIG_SND_ICE1724=''
CONFIG_SND_INDIGO=''
CONFIG_SND_INDIGODJ=''
CONFIG_SND_INDIGOIO=''
CONFIG_SND_INTEL8X0=''
CONFIG_SND_INTEL8X0M=''
CONFIG_SND_INTERWAVE=''
CONFIG_SND_INTERWAVE_STB=''
CONFIG_SND_KERNELDIR=''
CONFIG_SND_KORG1212=''
CONFIG_SND_KORG1212_FIRMWARE_IN_KERNEL=''
CONFIG_SND_LAYLA20=''
CONFIG_SND_LAYLA24=''
CONFIG_SND_LOOPBACK=''
CONFIG_SND_MAESTRO3=''
CONFIG_SND_MAESTRO3_FIRMWARE_IN_KERNEL=''
CONFIG_SND_MIA=''
CONFIG_SND_MIRO=''
CONFIG_SND_MIXART=''
CONFIG_SND_MIXER_OSS=''
CONFIG_SND_ML403_AC97CR=''
CONFIG_SND_MONA=''
CONFIG_SND_MPU401=''
CONFIG_SND_MPU401_UART=''
CONFIG_SND_MSND_PINNACLE=''
CONFIG_SND_MTPAV=''
CONFIG_SND_MTS64=''
CONFIG_SND_MVERSION=''
CONFIG_SND_NM256=''
CONFIG_SND_OPL3SA2=''
CONFIG_SND_OPL3_LIB=''
CONFIG_SND_OPL4_LIB=''
CONFIG_SND_OPTI92X_AD1848=''
CONFIG_SND_OPTI92X_CS4231=''
CONFIG_SND_OPTI93X=''
CONFIG_SND_OSSEMUL=''
CONFIG_SND_OXYGEN=''
CONFIG_SND_OXYGEN_LIB=''
CONFIG_SND_PC98_CS4232=''
CONFIG_SND_PCM=''
CONFIG_SND_PCM_OSS=''
CONFIG_SND_PCM_OSS_PLUGINS=''
CONFIG_SND_PCM_XRUN_DEBUG=''
CONFIG_SND_PCSP=''
CONFIG_SND_PCXHR=''
CONFIG_SND_PDAUDIOCF=''
CONFIG_SND_PDPLUS=''
CONFIG_SND_PORTMAN2X4=''
CONFIG_SND_POWERMAC=''
CONFIG_SND_POWERMAC_AUTO_DRC=''
CONFIG_SND_PS3=''
CONFIG_SND_PS3_DEFAULT_START_DELAY=''
CONFIG_SND_PXA2XX_AC97=''
CONFIG_SND_PXA2XX_I2SOUND=''
CONFIG_SND_PXA2XX_PCM=''
CONFIG_SND_PXA2XX_SOC=''
CONFIG_SND_PXA2XX_SOC_AC97=''
CONFIG_SND_PXA2XX_SOC_CORGI=''
CONFIG_SND_PXA2XX_SOC_E800=''
CONFIG_SND_PXA2XX_SOC_I2S=''
CONFIG_SND_PXA2XX_SOC_POODLE=''
CONFIG_SND_PXA2XX_SOC_SPITZ=''
CONFIG_SND_PXA2XX_SOC_TOSA=''
CONFIG_SND_RAWMIDI=''
CONFIG_SND_RIPTIDE=''
CONFIG_SND_RME32=''
CONFIG_SND_RME9652=''
CONFIG_SND_RME96=''
CONFIG_SND_RTCTIMER=''
CONFIG_SND_S3C2410=''
CONFIG_SND_S3C2412_SOC_I2S=''
CONFIG_SND_S3C2443_SOC_AC97=''
CONFIG_SND_S3C24XX_SOC=''
CONFIG_SND_S3C24XX_SOC_I2S=''
CONFIG_SND_S3C24XX_SOC_LN2440SBC_ALC650=''
CONFIG_SND_S3C24XX_SOC_NEO1973_WM8753=''
CONFIG_SND_S3C24XX_SOC_SMDK2443_WM9710=''
CONFIG_SND_SA11XX_UDA1341=''
CONFIG_SND_SB16=''
CONFIG_SND_SB16_CSP=''
CONFIG_SND_SB16_CSP_FIRMWARE_IN_KERNEL=''
CONFIG_SND_SB16_DSP=''
CONFIG_SND_SB8=''
CONFIG_SND_SB8_DSP=''
CONFIG_SND_SBAWE=''
CONFIG_SND_SB_COMMON=''
CONFIG_SND_SC6000=''
CONFIG_SND_SEQUENCER=''
CONFIG_SND_SEQUENCER_OSS=''
CONFIG_SND_SEQ_DUMMY=''
CONFIG_SND_SEQ_RTCTIMER_DEFAULT=''
CONFIG_SND_SERIALMIDI=''
CONFIG_SND_SERIAL_U16550=''
CONFIG_SND_SGALAXY=''
CONFIG_SND_SH7760_AC97=''
CONFIG_SND_SIS7019=''
CONFIG_SND_SOC=''
CONFIG_SND_SOC_AC97_BUS=''
CONFIG_SND_SOC_AC97_CODEC=''
CONFIG_SND_SOC_CS4270=''
CONFIG_SND_SOC_CS4270_HWMUTE=''
CONFIG_SND_SOC_CS4270_VD33_ERRATA=''
CONFIG_SND_SOC_MPC8610=''
CONFIG_SND_SOC_MPC8610_HPCD=''
CONFIG_SND_SOC_PCM_SH7760=''
CONFIG_SND_SOC_SH4_HAC=''
CONFIG_SND_SOC_SH4_SSI=''
CONFIG_SND_SOC_TLV320AIC3X=''
CONFIG_SND_SOC_WM8731=''
CONFIG_SND_SOC_WM8750=''
CONFIG_SND_SOC_WM8753=''
CONFIG_SND_SOC_WM9712=''
CONFIG_SND_SONICVIBES=''
CONFIG_SND_SSCAPE=''
CONFIG_SND_SUN_AMD7930=''
CONFIG_SND_SUN_CS4231=''
CONFIG_SND_SUN_DBRI=''
CONFIG_SND_SUPPORT_OLD_API=''
CONFIG_SND_TIMER=''
CONFIG_SND_TRIDENT=''
CONFIG_SND_USB_AUDIO=''
CONFIG_SND_USB_CAIAQ=''
CONFIG_SND_USB_CAIAQ_INPUT=''
CONFIG_SND_USB_USX2Y=''
CONFIG_SND_VERBOSE_PRINTK=''
CONFIG_SND_VERBOSE_PROCFS=''
CONFIG_SND_VERSION='1.0.16'
CONFIG_SND_VIA82XX=''
CONFIG_SND_VIA82XX_MODEM=''
CONFIG_SND_VIRMIDI=''
CONFIG_SND_VIRTUOSO=''
CONFIG_SND_VX222=''
CONFIG_SND_VXPOCKET=''
CONFIG_SND_VX_LIB=''
CONFIG_SND_WAVEFRONT=''
CONFIG_SND_WAVEFRONT_FIRMWARE_IN_KERNEL=''
CONFIG_SND_YMFPCI=''
CONFIG_SND_YMFPCI_FIRMWARE_IN_KERNEL=''
CONFIG_SOC_AU1000=''
CONFIG_SOC_AU1100=''
CONFIG_SOC_AU1500=''
CONFIG_SOUND=''
CONFIG_SOUND_PRIME=''
CONFIG_SPARC32=''
CONFIG_SPARC64=''
CONFIG_SPARC=''
CONFIG_SUPERH64=''
CONFIG_SUPERH=''
CONFIG_USB=''
CONFIG_VIDEO_DEV=''
CONFIG_VIDEO_V4L1=''
CONFIG_X86=''
CONFIG_X86_32=''
CONFIG_X86_64=''
CONFIG_X86_PC9800=''
CONFIG_X86_PC=''
CONFIG_XILINX_VIRTEX=''
CPP=''
CPPFLAGS=''
CROSS_COMPILE=''
DEFS=''
ECHO_C=''
ECHO_N='-n'
ECHO_T=''
EGREP=''
EXEEXT=''
EXTRA_INCLUDES=''
GENKSYMS=''
GREP=''
INSTALL_DATA=''
INSTALL_PROGRAM=''
INSTALL_SCRIPT=''
KERNEL_INC=''
KLD=''
LDFLAGS=''
LIBOBJS=''
LIBS=''
LTLIBOBJS=''
MAKE_ADDS=''
NEW_KBUILD=''
OBJEXT=''
PACKAGE_BUGREPORT=''
PACKAGE_NAME=''
PACKAGE_STRING=''
PACKAGE_TARNAME=''
PACKAGE_VERSION=''
PATH_SEPARATOR=':'
RANLIB=''
SHELL='/bin/bash'
SRCDIR=''
ac_ct_CC='gcc'
bindir='${exec_prefix}/bin'
build_alias=''
c_opts=''
datadir='${datarootdir}'
datarootdir='${prefix}/share'
docdir='${datarootdir}/doc/${PACKAGE}'
dvidir='${docdir}'
exec_prefix='NONE'
host_alias=''
htmldir='${docdir}'
includedir='${prefix}/include'
infodir='${datarootdir}/info'
kaversion=''
kextraversion=''
kpatchlevel=''
ksublevel=''
kversion=''
libdir='${exec_prefix}/lib'
libexecdir='${exec_prefix}/libexec'
localedir='${datarootdir}/locale'
localstatedir='${prefix}/var'
m_opts=''
mandir='${datarootdir}/man'
moddir=''
moddir_tree=''
modsubdir=''
msmp=''
oldincludedir='/usr/include'
pdfdir='${docdir}'
prefix='NONE'
processor=''
program_transform_name='s,x,x,'
psdir='${docdir}'
sbindir='${exec_prefix}/sbin'
sharedstatedir='${prefix}/com'
sysconfdir='${prefix}/etc'
target_alias=''

## ----------- ##
## confdefs.h. ##
## ----------- ##

#define PACKAGE_NAME ""
#define PACKAGE_TARNAME ""
#define PACKAGE_VERSION ""
#define PACKAGE_STRING ""
#define PACKAGE_BUGREPORT ""

configure: exit 77

non è che si sia perso qualcos'altro durante il riavvio?

[black_swan]

qualcuno ha qualche suggerimento? ::) ::) >:(

[Naima]

eh mi spiace ho esaurito le idee..  :-\

[black_swan]

HO RISOLTO! installando i driver 1.0.15 è andato tutto!

allora per la webcam sembra meno complicata:
1) installare subversion e build-essentials (quest'ultimo già necessario per risolvere il problema in compilazione che avevo trovato nell'installare la versione 1.0.16 dei dirver scheda audio)
2) andare nel sito http://lsb.blogdns.net e scaricare i driver relativi alla webcam (nel momento in cui posto il sito non va! e nn pox provare)
3)installare i driver e poi diciamo che tutto dovrebbe andare... (altrimenti seguiranno altri post)

ciao a tt