(Sò che ha il 3D sta cxxxo di scheda video perchè con winxp giocavo a vari giochini (per carità non halflife3, però neanche schifo...))
Il mio problema è che non capisco che devo fare.
Il problema è sul portatile, nella firma in fondo al post trovate il link con tutte le specifiche del pc in questione...
Se lancio il file di installazione mi dà una sfilza di errori:
Codice: Seleziona tutto
bud@laptop:~$ sudo sh '/home/bud/K8M800/src/vinstall'
-e -------- install start --------
Install VIA/S3G UniChrome family graphic driver!
Which CPU do you use ?
1. VIA C3-2(C5N/C5P), C7/C7M/C7D/Eden, Intel Pentium 2/3/4
2. VIA C3
3. AMD K7
4. AMD K8 with 32 bits OS(x86)
5. AMD K8 with 64 bits OS(x86_64)
6. Intel Pentium 4 with 64 bits OS(x86_64)
4
-e Please wait...
-e Do you want VMI-ONLY(1) path or V4L(2) path?(1/2)
1
[: 356: ==: unexpected operator
[: 356: ==: unexpected operator
cp: impossibile fare stat di `XServer/videodev.ko': Nessun file o directory
cp: l'obiettivo `/usr/X11R6/lib/modules/drivers/' non è una directory: Nessun file o directory
cp: impossibile fare stat di `XServer/via.ko': Nessun file o directory
cp: impossibile fare stat di `XServer/drm.ko': Nessun file o directory
cp: impossibile fare stat di `XServer/unichrome_dri.so': Nessun file o directory
cp: impossibile fare stat di `XServer/libddmpeg.so': Nessun file o directory
cp: impossibile fare stat di `XServer/libGL.so.1.2': Nessun file o directory
sed: impossibile leggere /etc/modprobe.conf: Nessun file o directory
[: 551: ==: unexpected operator
sed: impossibile leggere /etc/rc.d/rc.local: Nessun file o directory
cp: impossibile creare il file normale `/etc/rc.d/rc.local': Nessun file o directory
sed: impossibile leggere /etc/rc.d/rc.local: Nessun file o directory
[: 613: ==: unexpected operator
cp: impossibile creare il file normale `/etc/rc.d/rc.local': Nessun file o directory
cp: impossibile creare il file normale `/etc/rc.d/rc.local': Nessun file o directory
FATAL: Module via not found.
[: 649: ==: unexpected operator
cp: impossibile fare stat di `.VIAVIDEORC': Nessun file o directory
-e Now start to install VIA/S3G display utility...
Warning, system cannot find the /usr/X11R6/lib/libXv.so.1.0 file.
Please install XFree86-libs RPM package first.
You can find the package in the installation CD.
Abort, the utility is not installed.
Questo è il file di guida:
Codice: Seleziona tutto
VIA S3 UniChrome Linux Display Driver
Source Code Compiling Instructions
December 12, 2007
Copyright (C) 2002-2007 VIA Technologies, INC.
1. Summary
This document describes how to compile the VIA UniChrome family Linux display
driver source code on Debian 4.0r1, Fedora Core Linux 4/5/6/7, Mandriva
Linux 2007.0/2007.1, openSUSE Linux 10.2, and Ubuntu Desktop 6.10/7.04.
This software package supports 2D, 3D, TV-Out, hardware video mpeg2/4 and
hardware video overlay. Aiglx function can be supported on Fedora Core Linux
6/7, ubuntu Desktop 7.04.Other distributions only support 2D, TV-Out,
hardware video mpeg2/4 and hardware video overlay. The information and the
source code files are provided "AS IS" without
guarantee of any kind.
2. Set up environment (kernel 2.6.x)
(1) Xorg SDK RPM/DEB package (Debian4.0/FC5/FC6/FC7/MDV2007/2007.1/Ubuntu6.10/7.04/7.10), Xorg source package
(FC4) or XFree86 source package (Debian3.1r4):
Debian Linux 4.0: xorg-dev (deb)
Fedora Core Linux 4.0: xorg-x11-6.8.2-31.src.rpm
Fedora Core Linux 5.0: xorg-x11-server-sdk-1.0.1-8.i386.rpm
Fedora Core Linux 6.0: xorg-x11-server-sdk-1.1.1-47.fc6.i386.rpm
Fedora Core Linux 7.0: xorg-x11-server-sdk-1.3.0.0-7.fc7.i386.rpm
Mandriva Linux 2007.0/2007.1: libxorg-x11-devel-7.1.0-6mdv2007.0.i586.rpm
openSUSE Linux 10.2: xorg-x11-server-sdk-7.2-30.i586.rpm
Ubuntu Linux 6.10/7.04: xorg-dev (deb)
(2) 3D Mesa source rpm or package for building VIA DRI library:
MesaLib-6.5.1.tar.gz
(3) VIA UniChrome family display driver version: 4.1.0072.
The driver source code comprises files in three directories
as described below:
via (Header files, 2D XServer and V4L driver source files)
VIA-VMILIB (MPEG dynamic-link object code)
3D (VIA DRM/AGP/DRI source files and 3D DRI dynamic-link object code for
default Debian Linux 4.0, Fedora Linux Core 4/5/6,
Mandriva Linux 2007.0/2007.1 , openSUSE Linux 10.2,
and Ubuntu 6.10/7.04/7.10 kernel)
Utility (VIA/S3G TV display utility)
3. Install & compile Xorg source. Run the following commands.
(Only for Xorg < 7.0)
*This step is only for Fedora Core Linux 4.
# rpm -ivh xorg-x11-6.8.2-31.src.rpm
# cd /usr/src/redhat/SPECS
# rpmbuild -bc xorg-x11.spec
# cd /usr/src/redhat/BUILD/xorg-x11-6.8.2/xc
# make World & tail -f >& world.log
# mv xc/ /usr/src/
Note: Depending on your system used, it may take 1 or 2 hours to finish.
4. Prepare kernel source for VIA display driver (DRM) or rebuild kernel (AGP).
*The sample is default kernel in Fedora Core Linux 5.
# rpm -ivh kernel-2.6.15-1.2054_FC5.src.rpm
# cd /usr/src/redhat/SPECS/
# rpmbuild -bp kernel-2.6.spec --target=i686
# mv /usr/src/redhat/BUILD/kernel-2.6.15/linux-2.6.15.i686 /usr/src/
# ln -sf /usr/src/linux-2.6.15.i686 /usr/src/linux
*The sample is default kernel in Fedora Core Linux 6.
# rpm -ivh kernel-2.6.18-1.2798.fc6.src.rpm
# cd /usr/src/redhat/SPECS/
# rpmbuild -bp kernel-2.6.spec
# mv /usr/src/redhat/BUILD/kernel-2.6.18/linux-2.6.18.i386 /usr/src/
# ln -sf /usr/src/linux-2.6.18.i386 /usr/src/linux
*The sample is default kernel in Fedora Core Linux 7.
# rpm -ivh kernel-2.6.21-1.3194.fc7.src.rpm
# cd /usr/src/redhat/SPECS/
# rpmbuild -bp kernel-2.6.spec
# mv /usr/src/redhat/BUILD/kernel-2.6.21/linux-2.6.21.i686 /usr/src/
# ln -sf /usr/src/linux-2.6.21.i686 /usr/src/linux
*The sample is default kernel in Ubuntu Linux 6.10.
# sudo passwd root (change the root's password then login as
the root again)
# cd /usr/src/
# tar jxvf linux-source-2.6.17.tar.bz2
# cd linux-source-2.6.17
# cp /boot/config-2.6.17-10-generic .config
*The sample is default kernel in Ubuntu Linux 7.04.
# sudo passwd root (change the root's password then login as
the root again)
# cd /usr/src/
# tar jxvf linux-source-2.6.20.tar.bz2
# cd linux-source-2.6.20
# cp /boot/config-2.6.20-15-generic .config
*The sample is default kernel in Debian Linux 4.0.
# cd /usr/src/
# tar jxvf kernel-source-2.6.18.tar.bz2
# cd kernel-source-2.6.18
# cp /boot/config-2.6.18-4-486 .config
Note: Depending on your system used, it may take 10 or 15 minutes to finish.
Note: Mandriva Linux 2007.0 will have the kernel source tree in /usr/src/
folder when installing the kernel source rpm package
"kernel-source-2.6.17.5mdv-1-1mdv2007.0".
Note: Mandriva Linux 2007.1 will have the kernel source tree in /usr/src/
folder when installing the kernel source rpm package
"kernel-source-2.6.17.13mdv-1-1mdv2007.1".
Note: openSUSE Linux 10.2 will have the kernel source tree in /usr/src/
folder when installing the kernel source rpm package
"kernel-source-2.6.18.2-34".
5. Modify the "Makefile" file for syncing to the kernel version users used.
# vi /usr/src/linux/Makefile (make sure the "EXTRAVERSION" value
in Makefile is the same as OS kernel version "#uname -r".
e.g. "EXTRAVERSION= -2-386" in Debian3.1r4, "EXTRAVERSION= -4-486"
in Debian4, "EXTRAVERSION= -1.2054_FC5" in FC5,
"EXTRAVERSION= -1.2798.fc6" in FC6, "EXTRAVERSION= -5mdv"
in MDV2007.0, "EXTRAVERSION= -13mdv" in MDV2007.1,
"EXTRAVERSION= .2" in openSUSE10.2, "EXTRAVERSION= -10-generic"
in Ubuntu6.10 and "EXTRAVERSION= -15-generic" in Ubuntu7.04)
# make modules_prepare (configure the run time settings of kernel source
by this command in /usr/src/linux folder)
6. Use a script to build CLE266CN400CN-CX700CN800 driver and select the
"72" version and CPU type to build. The driver binary will be created
in default /CLE266CN400CN-CX700CN800XORG40072 folder.
# tar zxvf CLE266CN400CN-CX700CN800XORG40072-kernel-src_[date].tgz
# cd CLE266CN400CN-CX700CN800XORG40072-kernel-src_[date]/src
# ./makedriver drm (Other distributions only build 2D/MPEG driver
without the "drm" parameter)
7. Manually compile 3D Mesa source with some VIA DRI patch files
in Debian Linux 4, Fedora Core Linux 5/6, Mandriva Linux 2007.0/2007.1,
openSUSE Linux 10.2 and Ubuntu Desktop 6.10/7.04. Please make sure the OS
default Mesa source rpm package is ready.
*The sample is in Debian Linux 4.0 (MesaLib 6.5.1-0.6).
# tar zxvf MesaLib-6.5.1.tar.gz
# cd Mesa-6.5.1
# cp -a [Driver-Package-Name]/src/3D/DRI_src/unichrome src/mesa/drivers/dri
# cp -a [Driver-Package-Name]/src/3D/linux-dri configs/linux-dri
# make linux-dri-x86
# cp -a lib/unichrome_dri.so /CLE266CN400CN-CX700CN800XORG40072/XServer
# cp -a lib/libGL.so.1.2 /CLE266CN400CN-CX700CN800XORG40072/XServer
Note: Depending on your system used, it may take 10 or 15 minutes to finish.
8. If users want to enable AGP feature (higher performance) for CN700,
CX700(M/M2), VX700(M/M2), VN800 and CN800 IGPs, users need to rebuild
kernel source with VIA's agpgart patch in Fedora Core Linux 4/5/6.
The "makedriver" script had copied some new AGP files to
the kernel source tree. If users skip this step, the VIA driver
will use the PCI feature to work. The sample is in Fedora Core Linux 5.
# cp [Driver-Package-Name]/src/3D/DRM-AGP/[os]/pci_ids.h /usr/src/linux/include/linux
# cp [Driver-Package-Name]/src/3D/DRM-AGP/[os]/via-agp.c /usr/src/linux/drivers/char/agp
# cd /usr/src/linux
# make; make modules_install
# cp arch/i386/boot/bzImage /boot/vmlinuz-2.6.15-1.2054_FC5_VIA
# cd /boot/
# mkinitrd initrd-2.6.15-1.2054_FC5_VIA.img 2.6.15-1.2054_FC5
Note: Depending on your system used, it may take 1 or 2 hours to finish.
Note: Make sure users' IDE(DMA) feature can work properly in
VT8237A/VT8251/CX700(M/M2)/VX700(M/M2) chips. If not, please patch
the IDE driver before rebuild the kernel.
Note: In Debian Linux 4.0r1, Mandriva Linux 2007, openSUSE Linux 10.2
and Ubuntu Linux 6.10/7.04, because of the module mode driver
"via-agp.ko" users don't rebuild the whole kernel source.
Reboot OS and adopt this new kernel image to boot. Use the "dmesg" command
in X Window terminal to check agpgart module support with CN700/CX700(M/M2)/
CN800/VN800/VX700(M/M2).
# dmesg | grep agpgart
agpgart: Detected VIA CX700 chipset
agpgart: AGP aperture is 128M @ 0x80000000
agpgart: Found an AGP3.5 compliant device at 0000:00:00.0.
apggart: X tried to set rate=x12. Setting to AGP3 x8 mode.
agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
9. Confirm the existence of "via_drv.so", "libddmpeg.so", "via_v4l_drv.ko",
"drm.ko", "via.ko", "libGL.so.1.2", "libglx.so", "unichrome_dri.so", and "Utility".
Use a script "vinstall" to setup those drivers and VIA/S3G TV display utility.
# ./vinstall (select 1. VMI-ONLY path or 2. V4L path)
Use the command "lsmod" to check whether the modules are successfully loaded.
If users see the "drm", "via" and "via_v4l_drv" modules, then the V4L driver path
is successfully loaded.
Note: There is the "videodev.ko" driver in Fedora Core Linux 4.
It will replace the OS default videodev driver.
Note: There is the "via-agp.ko" driver in Debian Linux 3.1r4/4.0,
Mandriva Linux 2007.0/2007.1, openSUSE Linux 10.2
and Ubuntu Linux 6.10/7.04.
It will replace the OS default via-agp driver.
Note: VMI-ONLY path is a non-kernel dependency way to enable the VIA 2D/3D/
HW MPEG/TV features.
Note: Other distributions will only create two binary codes (via_drv.so and
libddmpeg.so)
Known issue:
Appendix:
Fedora Core Linux 4.0 dependency packages:
bash-3.0-31.i386.rpm
bison-2.0-6.i386.rpm
cpp-4.0.0-8.i386.rpm
expat-devel-1.95.8-6.i386.rpm
flex-2.5.4a-34.i386.rpm
fontconfig-devel-2.2.3-13.i386.rpm
freetype-devel-2.1.9-2.i386.rpm
gcc-4.0.0-8.i386.rpm
glibc-devel-2.3.5-10.i386.rpm
kernel-2.6.11-1.1369_FC4.src.rpm
libstdc++4.0.0-8.i386.rpm
libpng-devel-1.2.8-2.i386.rpm
ncurses-devel-5.4-17.i386.rpm
pam-devel-0.79-8.i386.rpm
rpm-4.4.1-21.i386.rpm
rpm-build-4.4.1-21.i386.rpm
xorg-x11-devel-6.8.2-31.i386.rpm
xorg-x11-libs-6.8.2-31.i386.rpm
zlib-devel-1.2.2.2-3.i386.rpm
Fedora Core Linux 5.0 dependency packages:
bash-3.1-6.2
bison-2.1-1.2.1
cpp-4.1.0-3
expat-1.95.8-8.2
flex-2.5.4a-37.4
fontconfig-devel-2.3.94-1
freetype-devel-2.1.10-5.2.1
gcc-4.1.0-3
glibc-devel-2.4-4
kernel-2.6.15-1.2054_FC5.src.rpm
libstdc++4.1.0-3
libpng-devel-1.2.8-2.2.1
ncurses-devel-5.5-19
pam-devel-0.99.3.0-2
rpm-4.4.2-15.2
rpm-build-4.4.2-15.2
xorg-x11-server-sdk-1.0.1-8
zlib-devel-1.2.3-1.2.1
<Some dependency packages for building VIA DRI driver in 3D Mesa>
imake-1.0.1-3
mesa-libGLU-6.4.2-6
mesa-libGLU-devel-6.4.2-6
freeglut-devel-2.4.0-4
libXp-devel-1.0.0-2.2
openmotif-2.3.0-0.1.9.2
openmotif-devel-2.3.0-0.1.9.2
Fedora Core Linux 6.0 dependency packages:
bash-3.1-16.1
bison-2.3-2.1
cpp-4.1.1-30
expat-1.95.8-8.2.1
flex-2.5.4a-41.fc6
fontconfig-devel-2.4.1-3.fc6
freetype-devel-2.2.1-10.fc6
gcc-4.1.1-30
glibc-devel-2.5-3
kernel-2.6.18-1.2798.fc6.src.rpm
libstdc++4.1.1-30
libpng-devel-1.2.10-7
ncurses-devel-5.5-24.20060715
pam-devel-0.99.6.2-3.fc6
rpm-4.4.2-32
rpm-build-4.4.2-32
xorg-x11-server-sdk-1.1.1-47.fc6
zlib-devel-1.2.3-3
<Some dependency packages for building VIA DRI driver in 3D Mesa>
imake-1.0.2-3
Fedora Core Linux 7.0 dependency packages:
bash
bison
cpp
expat
flex
fontconfig-devel
freetype-devel
gcc
glibc
kernel-2.6.21-1.3194.fc7.src.rpm
libstdc++
libpng-devel
ncurses-devel
pam-devel
rpm
rpm-build
xorg-x11-server-sdk
zlib-devel-1.2.3-3
<Some dependency packages for building VIA DRI driver in 3D Mesa>
imake-1.0.2-3
Mandriva Linux 2007.0 dependency packages:
bash-3.1-7mdv2007.0
gcc-cpp-4.1.1-3mdk
libexpat0-1.95.8-3mdk
fontconfig-devel-2.4.1-3.fc6
libfontconfig1-devel-2.4.1-1mdv2007.0
gcc-4.1.1-3mdk
glibc-devel-2.4-4mdk
glibc-static-devel-2.4-4mdk (static libm.a library)
kernel-source-2.6.17.5mdv-1-1mdv2007.0
libmesagl1-devel-6.5-17mdv2007.0
libstdc++6-4.1.1-3mdk
libpng3-devel-1.2.12-2mdv2007.0
libxxf86vm1-devel-1.0.1-2mdv2007.0
mesa-demos-6.5-17mdv2007.0 (GLX demo)
libncurses5-devel-5.5-1.20051029.4mdv2007.0
libpam0-0.99.6.0-3mdv2007.0
libxvmc1-devel-1.0.2-2mdv2007.0
rpm-4.4.6-10mdv2007.0
rpm-build-4.4.6-10mdv2007.0
libxorg-x11-devel-7.1.0-6mdv2007.0
zlib1-devel-1.2.3-2mdv2007.0
<Some dependency packages for building VIA DRI driver in 3D Mesa>
ed-0.2-32mdk
libexpat0-devel-1.95.8-3mdk
libmesaglu1-6.5-17mdv2007.0
libmesaglu1-devel-6.5-17mdv2007.0
libnetpbm10-10.34-2mdv2007.0
libtcl8.4-8.4.13-1mdk
netpbm-10.34-2mdv2007.0
makedepend-1.0.0-3mdv2007.04
mesa-6.5-17mdv2007.0.src.rpm (MesaLib 6.5 source package)
netpbm-10.34-2mdv2007.0
sam2p-0.44.14-1mdk
tcl-8.4.13-1mdk
tetex-3.0-18mdv2007.0
texinfo-4.8-4mdv2007.0
Mandriva Linux 2007.1 dependency packages:
bash
gcc-cpp-4.1.2
libexpat0
fontconfig-devel
libfontconfig1-devel
gcc-4.1.2
glibc-devel
glibc-static-devel-2.4-8mdv2007.1 (static libm.a library)
kernel-source-2.6.17.13mdv-1-1mdv2007.1
libdrm
libmesagl1-devel
libstdc++6
libpng3-devel
libxxf86vm1-devel
mesa-demos (GLX demo)
libncurses5-devel
libpam0
libxvmc1-devel
rpm
rpm-build
libxorg-x11-devel
zlib1-devel
<Some dependency packages for building VIA DRI driver in 3D Mesa>
ed
jpeg-progs
libexpat0-devel
libmesaglu1
libmesaglu1-devel
libtcl
netpbm
makedepend
netpbm
sam2p
tcl
tetex
texinfo
openSUSE Linux 10.2 dependency packages:
bash-3.1-55
cpp-4.1.3-29
fontconfig-devel-2.4.1-19
gcc-4.1.3-29
glibc-devel-2.5-25
kernel-source-2.6.18.2-34
libstdc++41-4.1.2-20061115-5
libpng-devel-1.2.12-23
ncurses-devel-5.5-42
rpm-4.4.2-72
zlib1-devel-1.2.3-33
<Some dependency packages for building VIA DRI driver in 3D Mesa>
ed-0.2-897
libnetpbm-1.0.0-676
netpbm-10.26.22-33
tcl-8.4.14-11
texinfo-4.8-43
Ubuntu Linux 6.10 dependency packages (deb):
autoconf (>2.53)
automake (>1.6)
autotools-dev
build-essential
bash
cpp-4.1
gcc-4.1-base
gcc-4.1
linux-source-2.6.17
libdrm-dev
libncurse5
libnucrse5-dev
libtool
m4
mesa-common-dev
xorg-dev (includes some dependency packages)
xserver-xorg-dev (includes some dependency packages)
Ubuntu Linux 7.04 dependency packages (deb):
autoconf (>2.53)
automake (>1.6)
autotools-dev
build-essential
bash
cpp-4.1
gcc-4.1-base
gcc-4.1
linux-source-2.6.20
libdrm-dev
libgl1-mesa-dev
libncurse5
libnucrse5-dev
libtool
m4
mesa-common-dev
xorg-dev (includes some dependency packages)
xserver-xorg-dev (includes some dependency packages)
Debian Linux 3.1r4 dependency packages (deb):
autoconf (2.59a-3)
automake1.4
autotools-dev
bash
cpp-3.3
gcc-3.3-base
gcc-3.3
kernel-source-2.6.8
libncurses5
libnucrses5-de
libtool
m4
XFree86 4.3.0 sourec packages (X430src-1.tgz ~X430src-7,tgz packages)
<Some dependency packages for building VIA DRI driver in 3D Mesa>
X11R6.6 cvs source package
Debian Linux 4.0 dependency packages (deb):
autoconf (>2.53)
automake1.9 (>1.6)
autotools-dev
build-essential
bash
cpp-4.1
freeglut3
gcc-4.1-base
gcc-4.1
linux-headers-2.6.18-4-486
linux-kbuild-2.6.18
linux-source-2.6.18
libdrm-dev
libgl1-mesa-dev
libncurse5
libnucrse5-dev
libtool
m4
mesa-common-dev
mesa-utils
xorg-dev (includes some dependency packages)
xserver-xorg-dev (includes some dependency packages)
<Some dependency packages for building VIA DRI driver in 3D Mesa>
Note: After installing OS, using command "rpm -qa | grep gcc" (rpm base) or
"dpkg -l | grep gcc" (deb base) to verify the following packages have been
installed on the system.
Note: There is a convenient GUI package manager "Synaptic Package Manager" in
Debian 4.0/Ubuntu 6.10/7.04 (update "/etc/apt/sources.list" file and
ebable LAN feature).
Please click the "Reload Package Information" in the tool then install
and update any package we need above. Codice: Seleziona tutto
bud@laptop:~$ sudo sh '/home/bud/K8M800/src/makedriver'
Which version driver you want to release (x86) ?
x86
mkdir: impossibile creare la directory `/CLE266CN400CN-CX700CN800XORG400x86': Il file esiste
Which CPU do you use ?
1. VIA C3-2(C5N/C5P), C7/C7D/C7M/Eden, Intel Pentium 2/3/4(x86)
2. VIA C3
3. AMD K7
4. AMD K8 with 32 bits OS(x86)
5. AMD K8 with 64 bits OS(x86_64)
4
cp: impossibile fare stat di `viax.conf': Nessun file o directory
cp: impossibile fare stat di `vinstall': Nessun file o directory
cp: impossibile fare stat di `vuninstall': Nessun file o directory
cp: impossibile fare stat di `.VIAVIDEORC': Nessun file o directory
cp: impossibile fare stat di `Utility': Nessun file o directory
cp: impossibile fare stat di `../Installation.txt': Nessun file o directory
cd: 499: can't cd to 3D/DRM
cp: impossibile fare stat di `via.ko': Nessun file o directory
cp: impossibile fare stat di `drm.ko': Nessun file o directory
cp: impossibile fare stat di `../DRI-Xorg_bin/Ubuntu/7.10/unichrome_dri.so': Nessun file o directory
cp: impossibile fare stat di `../DRI-Xorg_bin/Ubuntu/7.10/libGL.so.1.2': Nessun file o directory
cd: 509: can't cd to 3D
cp: impossibile fare stat di `libglx.so': Nessun file o directory
cp: impossibile fare stat di `VIA-VMILIB/libddmpeg.so': Nessun file o directory
cd: 517: can't cd to via
cd: 704: can't cd to /home/bud/via/X11R7
sh: Can't open config_x11r7
sh: Can't open configure_xorg7.2
make: *** No rule to make target `clean'. Stop.
cp: impossibile fare stat di `src/.libs/via_drv.so': Nessun file o directory
cp: impossibile fare stat di `via_drv.o': Nessun file o directory
strip: '/CLE266CN400CN-CX700CN800XORG400x86/XServer/via_drv.so': No such file
strip: '/CLE266CN400CN-CX700CN800XORG400x86/XServer/libddmpeg.so': No such file
-e -------- Complete to make & copy driver --------
