Codice: Seleziona tutto
Non è stato trovato alcun plugin di GStreamer o dispositivo per la regolazione del volume.Codice: Seleziona tutto
00:00.0 RAM memory: nVidia Corporation C51 Host Bridge (rev a2)
00:00.1 RAM memory: nVidia Corporation C51 Memory Controller 0 (rev a2)
00:00.2 RAM memory: nVidia Corporation C51 Memory Controller 1 (rev a2)
00:00.3 RAM memory: nVidia Corporation C51 Memory Controller 5 (rev a2)
00:00.4 RAM memory: nVidia Corporation C51 Memory Controller 4 (rev a2)
00:00.5 RAM memory: nVidia Corporation C51 Host Bridge (rev a2)
00:00.6 RAM memory: nVidia Corporation C51 Memory Controller 3 (rev a2)
00:00.7 RAM memory: nVidia Corporation C51 Memory Controller 2 (rev a2)
00:03.0 PCI bridge: nVidia Corporation C51 PCI Express Bridge (rev a1)
00:04.0 PCI bridge: nVidia Corporation C51 PCI Express Bridge (rev a1)
00:09.0 RAM memory: nVidia Corporation MCP51 Host Bridge (rev a2)
00:0a.0 ISA bridge: nVidia Corporation MCP51 LPC Bridge (rev a2)
00:0a.1 SMBus: nVidia Corporation MCP51 SMBus (rev a2)
00:0b.0 USB Controller: nVidia Corporation MCP51 USB Controller (rev a2)
00:0b.1 USB Controller: nVidia Corporation MCP51 USB Controller (rev a2)
00:0d.0 IDE interface: nVidia Corporation MCP51 IDE (rev a1)
00:0e.0 IDE interface: nVidia Corporation MCP51 Serial ATA Controller (rev a1)
00:10.0 PCI bridge: nVidia Corporation MCP51 PCI Bridge (rev a2)
00:10.1 Audio device: nVidia Corporation MCP51 High Definition Audio (rev a2)
00:14.0 Bridge: nVidia Corporation MCP51 Ethernet Controller (rev a1)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
02:00.0 VGA compatible controller: nVidia Corporation NV43 [GeForce 6600] (rev a2)
03:08.0 Multimedia controller: Philips Semiconductors SAA7134/SAA7135HL Video Broadcast Decoder (rev 01)
gianluca@gianluca-desktop:~$ sudo lspci
00:00.0 RAM memory: nVidia Corporation C51 Host Bridge (rev a2)
00:00.1 RAM memory: nVidia Corporation C51 Memory Controller 0 (rev a2)
00:00.2 RAM memory: nVidia Corporation C51 Memory Controller 1 (rev a2)
00:00.3 RAM memory: nVidia Corporation C51 Memory Controller 5 (rev a2)
00:00.4 RAM memory: nVidia Corporation C51 Memory Controller 4 (rev a2)
00:00.5 RAM memory: nVidia Corporation C51 Host Bridge (rev a2)
00:00.6 RAM memory: nVidia Corporation C51 Memory Controller 3 (rev a2)
00:00.7 RAM memory: nVidia Corporation C51 Memory Controller 2 (rev a2)
00:03.0 PCI bridge: nVidia Corporation C51 PCI Express Bridge (rev a1)
00:04.0 PCI bridge: nVidia Corporation C51 PCI Express Bridge (rev a1)
00:09.0 RAM memory: nVidia Corporation MCP51 Host Bridge (rev a2)
00:0a.0 ISA bridge: nVidia Corporation MCP51 LPC Bridge (rev a2)
00:0a.1 SMBus: nVidia Corporation MCP51 SMBus (rev a2)
00:0b.0 USB Controller: nVidia Corporation MCP51 USB Controller (rev a2)
00:0b.1 USB Controller: nVidia Corporation MCP51 USB Controller (rev a2)
00:0d.0 IDE interface: nVidia Corporation MCP51 IDE (rev a1)
00:0e.0 IDE interface: nVidia Corporation MCP51 Serial ATA Controller (rev a1)
00:10.0 PCI bridge: nVidia Corporation MCP51 PCI Bridge (rev a2)
00:10.1 Audio device: nVidia Corporation MCP51 High Definition Audio (rev a2)
00:14.0 Bridge: nVidia Corporation MCP51 Ethernet Controller (rev a1)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
02:00.0 VGA compatible controller: nVidia Corporation NV43 [GeForce 6600] (rev a2)
03:08.0 Multimedia controller: Philips Semiconductors SAA7134/SAA7135HL Video Broadcast Decoder (rev 01)
Codice: Seleziona tutto
[ 0.000000] BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003ffb0000 (usable)
[ 0.000000] BIOS-e820: 000000003ffb0000 - 000000003ffc0000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003ffc0000 - 000000003fff0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] 127MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000ff780
[ 0.000000] Entering add_active_range(0, 0, 262064) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 262064
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 262064
[ 0.000000] On node 0 totalpages: 262064
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 255 pages used for memmap
[ 0.000000] HighMem zone: 32433 pages, LIFO batch:7
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP signature @ 0xC00FA720 checksum 0
[ 0.000000] ACPI: RSDP 000FA720, 0014 (r0 ACPIAM)
[ 0.000000] ACPI: RSDT 3FFB0000, 0038 (r1 A M I OEMRSDT 3000708 MSFT 97)
[ 0.000000] ACPI: FACP 3FFB0200, 0084 (r2 A M I OEMFACP 12000601 MSFT 97)
[ 0.000000] ACPI: DSDT 3FFB0440, 4BC1 (r1 M2N4G M2N4G126 126 INTL 2002026)
[ 0.000000] ACPI: FACS 3FFC0000, 0040
[ 0.000000] ACPI: APIC 3FFB0390, 0070 (r1 A M I OEMAPIC 3000708 MSFT 97)
[ 0.000000] ACPI: MCFG 3FFB0400, 003C (r1 A M I OEMMCFG 3000708 MSFT 97)
[ 0.000000] ACPI: OEMB 3FFC0040, 005E (r1 A M I AMI_OEM 3000708 MSFT 97)
[ 0.000000] ACPI: SSDT 3FFB5010, 0136 (r1 A M I POWERNOW 1 AMD 1)
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:15 APIC version 16
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored.
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
[ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e8000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000e8000 - 0000000000100000
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260017
[ 0.000000] Kernel command line: root=UUID=b165f193-6e56-4b75-b816-3d48c734cb02 ro quiet splash
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 2405.024 MHz processor.
[ 13.172301] spurious 8259A interrupt: IRQ7.
[ 13.174220] Console: colour VGA+ 80x25
[ 13.174223] console [tty0] enabled
[ 13.174495] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 13.174779] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 13.190311] Memory: 1027632k/1048256k available (2075k kernel code, 19824k reserved, 969k data, 356k init, 130752k highmem)
[ 13.190318] virtual kernel memory layout:
[ 13.190318] fixmap : 0xfffa6000 - 0xfffff000 ( 356 kB)
[ 13.190319] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 13.190320] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 13.190321] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 13.190322] .init : 0xc03fc000 - 0xc0455000 ( 356 kB)
[ 13.190323] .data : 0xc0306c1d - 0xc03f93a4 ( 969 kB)
[ 13.190324] .text : 0xc0100000 - 0xc0306c1d (2075 kB)
[ 13.190326] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 13.190359] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[ 13.270237] Calibrating delay using timer specific routine.. 4814.23 BogoMIPS (lpj=9628472)
[ 13.270255] Security Framework initialized
[ 13.270260] SELinux: Disabled at boot.
[ 13.270269] AppArmor: AppArmor initialized
[ 13.270272] Failure registering capabilities with primary security module.
[ 13.270277] Mount-cache hash table entries: 512
[ 13.270356] CPU: After generic identify, caps: 078bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001d 00000000
[ 13.270362] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 13.270364] CPU: L2 Cache: 512K (64 bytes/line)
[ 13.270366] CPU: After all inits, caps: 078bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000001d 00000000
[ 13.270373] Compat vDSO mapped to ffffe000.
[ 13.270380] CPU: AMD Athlon(tm) 64 Processor 3800+ stepping 02
[ 13.270384] Checking 'hlt' instruction... OK.
[ 13.287151] Freeing SMP alternatives: 0k freed
[ 13.287232] Early unpacking initramfs... done
[ 13.512294] ACPI: Core revision 20070126
[ 13.512339] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 13.514388] ENABLING IO-APIC IRQs
[ 13.514602] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 13.661640] net_namespace: 64 bytes
[ 13.661645] Booting paravirtualized kernel on bare hardware
[ 13.661974] Time: 9:36:03 Date: 03/16/08
[ 13.662004] NET: Registered protocol family 16
[ 13.662111] EISA bus registered
[ 13.662130] ACPI: bus type pci registered
[ 13.662819] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=3
[ 13.662821] PCI: Using configuration type 1
[ 13.662822] Setting up standard PCI resources
[ 13.669047] ACPI: EC: Look up EC in DSDT
[ 13.672998] ACPI: Interpreter enabled
[ 13.673000] ACPI: (supports S0 S1 S3 S4 S5)
[ 13.673010] ACPI: Using IOAPIC for interrupt routing
[ 13.679830] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 13.680616] PCI: Transparent bridge - 0000:00:10.0
[ 13.680628] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 13.680780] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[ 13.680849] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PA._PRT]
[ 13.680929] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 13.689176] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *11
[ 13.689332] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
[ 13.689487] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
[ 13.689644] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[ 13.689798] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *11
[ 13.689953] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *0, disabled.
[ 13.690110] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled.
[ 13.690265] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *0, disabled.
[ 13.690420] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *11
[ 13.690575] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *11
[ 13.690730] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *11
[ 13.690884] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *11
[ 13.691039] ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22 23) *0, disabled.
[ 13.691194] ACPI: PCI Interrupt Link [LMC9] (IRQs 20 21 22 23) *0, disabled.
[ 13.691349] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11
[ 13.691509] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *5
[ 13.691668] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *10
[ 13.691827] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *0, disabled.
[ 13.692010] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
[ 13.692089] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - E4, should be D7 [20070126]
[ 13.692095] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 13.692114] pnp: PnP ACPI init
[ 13.692120] ACPI: bus type pnp registered
[ 13.696409] pnp: PnP ACPI: found 14 devices
[ 13.696411] ACPI: ACPI bus type pnp unregistered
[ 13.696413] PnPBIOS: Disabled by ACPI PNP
[ 13.696541] PCI: Using ACPI for IRQ routing
[ 13.696543] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 13.717463] NET: Registered protocol family 8
[ 13.717464] NET: Registered protocol family 20
[ 13.717507] AppArmor: AppArmor Filesystem Enabled
[ 13.721451] Time: tsc clocksource has been installed.
[ 13.729459] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
[ 13.729461] system 00:07: ioport range 0x800-0x80f has been reserved
[ 13.729463] system 00:07: ioport range 0x4000-0x407f has been reserved
[ 13.729465] system 00:07: ioport range 0x4080-0x40ff has been reserved
[ 13.729467] system 00:07: ioport range 0x4400-0x447f has been reserved
[ 13.729469] system 00:07: ioport range 0x4480-0x44ff has been reserved
[ 13.729471] system 00:07: ioport range 0x4800-0x487f has been reserved
[ 13.729473] system 00:07: ioport range 0x4880-0x48ff has been reserved
[ 13.729475] system 00:07: ioport range 0x2000-0x207f has been reserved
[ 13.729477] system 00:07: ioport range 0x2080-0x20ff has been reserved
[ 13.729480] system 00:07: iomem range 0xfefe0000-0xfefe01ff has been reserved
[ 13.729482] system 00:07: iomem range 0xfee01000-0xfeefffff could not be reserved
[ 13.729486] system 00:08: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 13.729488] system 00:08: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 13.729490] system 00:08: iomem range 0xf7fc0000-0xf7ffffff has been reserved
[ 13.729495] system 00:0b: ioport range 0x290-0x29f has been reserved
[ 13.729499] system 00:0c: iomem range 0xe0000000-0xefffffff has been reserved
[ 13.729503] system 00:0d: iomem range 0x0-0x9ffff could not be reserved
[ 13.729505] system 00:0d: iomem range 0xc0000-0xcffff could not be reserved
[ 13.729507] system 00:0d: iomem range 0xe0000-0xfffff could not be reserved
[ 13.729509] system 00:0d: iomem range 0x100000-0x3fffffff could not be reserved
[ 13.729511] system 00:0d: iomem range 0xff000000-0xffffffff could not be reserved
[ 13.759713] PCI: Bridge: 0000:00:03.0
[ 13.759714] IO window: disabled.
[ 13.759717] MEM window: disabled.
[ 13.759718] PREFETCH window: disabled.
[ 13.759720] PCI: Bridge: 0000:00:04.0
[ 13.759721] IO window: disabled.
[ 13.759723] MEM window: f8000000-feafffff
[ 13.759725] PREFETCH window: d0000000-dfffffff
[ 13.759727] PCI: Bridge: 0000:00:10.0
[ 13.759728] IO window: disabled.
[ 13.759730] MEM window: feb00000-febfffff
[ 13.759732] PREFETCH window: disabled.
[ 13.759743] PCI: Setting latency timer of device 0000:00:03.0 to 64
[ 13.759748] PCI: Setting latency timer of device 0000:00:04.0 to 64
[ 13.759754] PCI: Setting latency timer of device 0000:00:10.0 to 64
[ 13.759762] NET: Registered protocol family 2
[ 13.797356] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 13.797563] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 13.798122] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[ 13.798255] TCP: Hash tables configured (established 131072 bind 65536)
[ 13.798257] TCP reno registered
[ 13.809389] checking if image is initramfs... it is
[ 14.247898] Freeing initrd memory: 7007k freed
[ 14.248258] audit: initializing netlink socket (disabled)
[ 14.248267] audit(1205660162.956:1): initialized
[ 14.248370] highmem bounce pool size: 64 pages
[ 14.249445] VFS: Disk quotas dquot_6.5.1
[ 14.249460] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 14.249548] io scheduler noop registered
[ 14.249549] io scheduler anticipatory registered
[ 14.249550] io scheduler deadline registered
[ 14.249558] io scheduler cfq registered (default)
[ 14.249587] Boot video device is 0000:02:00.0
[ 14.249660] PCI: Setting latency timer of device 0000:00:03.0 to 64
[ 14.249677] assign_interrupt_mode Found MSI capability
[ 14.249691] Allocate Port Service[0000:00:03.0:pcie00]
[ 14.249733] PCI: Setting latency timer of device 0000:00:04.0 to 64
[ 14.249749] assign_interrupt_mode Found MSI capability
[ 14.249759] Allocate Port Service[0000:00:04.0:pcie00]
[ 14.249885] isapnp: Scanning for PnP cards...
[ 14.260500] Switched to high resolution mode on CPU 0
[ 14.602318] isapnp: No Plug & Play device found
[ 14.619723] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 14.620099] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 14.620560] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 14.620973] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 14.621022] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 14.621075] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 14.621077] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 14.621568] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 14.631770] mice: PS/2 mouse device common for all mice
[ 14.631836] EISA: Probing bus 0 at eisa.0
[ 14.631843] Cannot allocate resource for EISA slot 2
[ 14.631847] Cannot allocate resource for EISA slot 4
[ 14.631848] Cannot allocate resource for EISA slot 5
[ 14.631850] Cannot allocate resource for EISA slot 6
[ 14.631855] EISA: Detected 0 cards.
[ 14.631857] cpuidle: using governor ladder
[ 14.631946] NET: Registered protocol family 1
[ 14.631962] Using IPI Shortcut mode
[ 14.631984] registered taskstats version 1
[ 14.632066] Magic number: 0:716:626
[ 14.632068] hash matches /build/buildd/linux-2.6.24/drivers/base/power/main.c:97
[ 14.632208] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 14.632210] EDD information not available.
[ 14.632389] Freeing unused kernel memory: 356k freed
[ 14.655688] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 15.815586] fuse init (API version 7.9)
[ 16.436376] usbcore: registered new interface driver usbfs
[ 16.436393] usbcore: registered new interface driver hub
[ 16.448332] usbcore: registered new device driver usb
[ 16.456758] SCSI subsystem initialized
[ 16.469009] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 16.469283] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
[ 16.469292] ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LUB0] -> GSI 23 (level, low) -> IRQ 16
[ 16.469301] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[ 16.469304] ohci_hcd 0000:00:0b.0: OHCI Host Controller
[ 16.469561] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 1
[ 16.469576] ohci_hcd 0000:00:0b.0: irq 16, io mem 0xf7fbe000
[ 16.489101] libata version 3.00 loaded.
[ 16.526254] usb usb1: configuration #1 chosen from 1 choice
[ 16.526272] hub 1-0:1.0: USB hub found
[ 16.526279] hub 1-0:1.0: 8 ports detected
[ 16.611637] Floppy drive(s): fd0 is 1.44M
[ 16.628380] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
[ 16.628390] ACPI: PCI Interrupt 0000:00:0b.1[B] -> Link [LUB2] -> GSI 22 (level, low) -> IRQ 17
[ 16.628400] PCI: Setting latency timer of device 0000:00:0b.1 to 64
[ 16.628402] ehci_hcd 0000:00:0b.1: EHCI Host Controller
[ 16.628420] ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 2
[ 16.628445] ehci_hcd 0000:00:0b.1: debug port 1
[ 16.628448] PCI: cache line size of 64 is not supported by device 0000:00:0b.1
[ 16.628456] ehci_hcd 0000:00:0b.1: irq 17, io mem 0xf7fbfc00
[ 16.632259] FDC 0 is a post-1991 82077
[ 16.639952] ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 16.640048] usb usb2: configuration #1 chosen from 1 choice
[ 16.640064] hub 2-0:1.0: USB hub found
[ 16.640069] hub 2-0:1.0: 8 ports detected
[ 16.743881] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
[ 16.744144] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 21
[ 16.744153] ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [LMAC] -> GSI 21 (level, low) -> IRQ 18
[ 16.744159] PCI: Setting latency timer of device 0000:00:14.0 to 64
[ 17.263130] forcedeth 0000:00:14.0: ifname eth0, PHY OUI 0x20 @ 1, addr 00:13:8f:a5:89:8f
[ 17.263134] forcedeth 0000:00:14.0: highdma pwrctl timirq lnktim desc-v3
[ 17.263345] pata_amd 0000:00:0d.0: version 0.3.10
[ 17.263390] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[ 17.264007] scsi0 : pata_amd
[ 17.264168] scsi1 : pata_amd
[ 17.264906] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 17.264908] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 17.582460] ata1.00: ATAPI: HL-DT-ST DVDRAM GSA-H42N, RL00, max UDMA/66
[ 17.642054] usb 1-2: new full speed USB device using ohci_hcd and address 2
[ 17.754072] ata1.00: configured for UDMA/66
[ 17.853807] usb 1-2: configuration #1 chosen from 1 choice
[ 18.093499] ata2.01: ATAPI: HL-DT-STDVD-ROM GDR8164B, 0L06, max UDMA/33
[ 18.169063] usb 1-4: new low speed USB device using ohci_hcd and address 3
[ 18.265111] ata2.01: configured for UDMA/33
[ 18.267899] scsi 0:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-H42N RL00 PQ: 0 ANSI: 5
[ 18.277587] scsi 1:0:1:0: CD-ROM HL-DT-ST DVD-ROM GDR8164B 0L06 PQ: 0 ANSI: 5
[ 18.279652] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 20
[ 18.279662] ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [LSA0] -> GSI 20 (level, low) -> IRQ 19
[ 18.279692] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[ 18.279702] ACPI: PCI interrupt for device 0000:00:0e.0 disabled
[ 18.281434] sata_nv 0000:00:0e.0: version 3.5
[ 18.281441] ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [LSA0] -> GSI 20 (level, low) -> IRQ 19
[ 18.281462] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[ 18.286546] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 18.286550] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 18.286945] scsi2 : sata_nv
[ 18.287574] scsi3 : sata_nv
[ 18.287694] ata3: SATA max UDMA/133 cmd 0xe800 ctl 0xe480 bmdma 0xe000 irq 19
[ 18.287696] ata4: SATA max UDMA/133 cmd 0xe400 ctl 0xe080 bmdma 0xe008 irq 19
[ 18.392828] usb 1-4: configuration #1 chosen from 1 choice
[ 18.406387] usbcore: registered new interface driver hiddev
[ 18.414858] input: Microsoft Microsoft Wheel Mouse Optical� as /devices/pci0000:00/0000:00:0b.0/usb1/1-4/1-4:1.0/input/input2
[ 18.428596] input,hidraw0: USB HID v1.00 Mouse [Microsoft Microsoft Wheel Mouse Optical�] on usb-0000:00:0b.0-4
[ 18.428608] usbcore: registered new interface driver usbhid
[ 18.428611] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 18.596264] ata3: SATA link down (SStatus 0 SControl 300)
[ 19.071378] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 19.080497] ata4.00: ATA-7: Maxtor 6V320F0, VA111900, max UDMA/133
[ 19.080499] ata4.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 19.096479] ata4.00: configured for UDMA/133
[ 19.096563] scsi 3:0:0:0: Direct-Access ATA Maxtor 6V320F0 VA11 PQ: 0 ANSI: 5
[ 19.102177] Driver 'sr' needs updating - please use bus_type methods
[ 19.108799] sr0: scsi3-mmc drive: 125x/125x writer dvd-ram cd/rw xa/form2 cdda tray
[ 19.108803] Uniform CD-ROM driver Revision: 3.20
[ 19.108842] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 19.110282] Driver 'sd' needs updating - please use bus_type methods
[ 19.121987] sr1: scsi3-mmc drive: 52x/52x cd/rw xa/form2 cdda tray
[ 19.122024] sr 1:0:1:0: Attached scsi CD-ROM sr1
[ 19.122302] sd 3:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
[ 19.125672] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 19.125686] sr 1:0:1:0: Attached scsi generic sg1 type 5
[ 19.125698] sd 3:0:0:0: Attached scsi generic sg2 type 0
[ 19.125758] sd 3:0:0:0: [sda] Write Protect is off
[ 19.125760] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 19.128288] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 19.128328] sd 3:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
[ 19.128335] sd 3:0:0:0: [sda] Write Protect is off
[ 19.128337] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 19.128346] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 19.128349] sda: sda1 sda2 sda3 sda4 < sda5 >
[ 19.173159] sd 3:0:0:0: [sda] Attached SCSI disk
[ 19.427838] Attempting manual resume
[ 19.427841] swsusp: Resume From Partition 8:5
[ 19.427843] PM: Checking swsusp image.
[ 19.427987] PM: Resume from disk failed.
[ 19.450786] kjournald starting. Commit interval 5 seconds
[ 19.450795] EXT3-fs: mounted filesystem with ordered data mode.
[ 24.676604] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 25.119677] Real Time Clock Driver v1.12ac
[ 25.834190] parport_pc 00:06: reported by Plug and Play ACPI
[ 25.834249] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 25.843845] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 25.845056] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 25.851022] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x5000
[ 25.851033] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x6000
[ 26.061471] input: Power Button (FF) as /devices/virtual/input/input4
[ 26.090201] ACPI: Power Button (FF) [PWRF]
[ 26.090273] input: Power Button (CM) as /devices/virtual/input/input5
[ 26.118163] ACPI: Power Button (CM) [PWRB]
[ 26.660841] Linux video capture interface: v2.00
[ 26.723526] saa7130/34: v4l2 driver version 0.2.14 loaded
[ 26.723827] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 19
[ 26.723836] ACPI: PCI Interrupt 0000:03:08.0[A] -> Link [LNKA] -> GSI 19 (level, low) -> IRQ 20
[ 26.723843] saa7134[0]: found at 0000:03:08.0, rev: 1, irq: 20, latency: 32, mmio: 0xfebffc00
[ 26.723848] saa7134[0]: subsystem: 11bd:002d, board: Pinnacle PCTV 300i DVB-T + PAL [card=50,autodetected]
[ 26.723856] saa7134[0]: board init: gpio is c806000
[ 26.856723] saa7134[0]: i2c eeprom 00: bd 11 2d 00 f8 f8 1c 00 43 43 a9 1c 55 d2 b2 92
[ 26.856730] saa7134[0]: i2c eeprom 10: 00 f0 04 04 ff 20 ff ff ff ff ff ff ff ff ff ff
[ 26.856734] saa7134[0]: i2c eeprom 20: 01 40 01 02 03 ff 03 01 08 ff 00 25 ff ff ff ff
[ 26.856738] saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 26.856742] saa7134[0]: i2c eeprom 40: ff 16 00 c0 86 3c 01 01 ff ff ff ff ff ff ff ff
[ 26.856746] saa7134[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 26.856750] saa7134[0]: i2c eeprom 60: 0c 22 17 44 02 99 58 1b ff ff ff ff ff ff ff ff
[ 26.856754] saa7134[0]: i2c eeprom 70: 00 30 8d 15 50 1c ff ff b4 9c ff ff ff ff ff ff
[ 26.944555] tuner 2-0043: chip found @ 0x86 (saa7134[0])
[ 26.944580] tda9887 2-0043: tda988[5/6/7] found @ 0x43 (tuner)
[ 26.944582] tuner 2-0043: type set to tda9887
[ 26.960522] Chip ID is not zero. It is not a TEA5767
[ 26.960528] tuner 2-0060: chip found @ 0xc0 (saa7134[0])
[ 26.976499] mt20xx 2-0060: microtune: companycode=3cbf part=42 rev=2f
[ 27.008434] mt20xx 2-0060: microtune MT2050 found, OK
[ 27.008438] tuner 2-0060: type set to MT2050
[ 27.024413] mt20xx 2-0060: microtune: companycode=3cbf part=42 rev=2f
[ 27.056343] mt20xx 2-0060: microtune MT2050 found, OK
[ 27.056347] tuner 2-0060: type set to MT2050
[ 27.058463] saa7134[0]: registered device video0 [v4l2]
[ 27.058474] saa7134[0]: registered device vbi0
[ 27.200118] Linux agpgart interface v0.102
[ 27.228056] DVB: registering new adapter (saa7134[0])
[ 27.228061] DVB: registering frontend 0 (Zarlink MT352 DVB-T)...
[ 27.348336] nvidia: module license 'NVIDIA' taints kernel.
[ 27.823723] ACPI: PCI Interrupt Link [LNEA] enabled at IRQ 18
[ 27.823733] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNEA] -> GSI 18 (level, low) -> IRQ 21
[ 27.823740] PCI: Setting latency timer of device 0000:02:00.0 to 64
[ 27.823916] NVRM: loading NVIDIA UNIX x86 Kernel Module 169.12 Thu Feb 14 17:53:07 PST 2008
[ 30.232320] lp0: using parport0 (interrupt-driven).
[ 30.300045] Adding 3036244k swap on /dev/sda5. Priority:-1 extents:1 across:3036244k
[ 30.902483] EXT3 FS on sda1, internal journal
[ 31.682674] kjournald starting. Commit interval 5 seconds
[ 31.682819] EXT3 FS on sda2, internal journal
[ 31.682822] EXT3-fs: mounted filesystem with ordered data mode.
[ 32.513354] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 32.902769] No dock devices found.
[ 33.075536] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3800+ processors (1 cpu cores) (version 2.20.00)
[ 33.075567] powernow-k8: 0 : fid 0x10 (2400 MHz), vid 0x8
[ 33.075569] powernow-k8: 1 : fid 0xe (2200 MHz), vid 0xa
[ 33.075571] powernow-k8: 2 : fid 0xc (2000 MHz), vid 0xc
[ 33.075573] powernow-k8: 3 : fid 0xa (1800 MHz), vid 0xe
[ 33.075574] powernow-k8: 4 : fid 0x2 (1000 MHz), vid 0x12
[ 37.307795] ppdev: user-space parallel port driver
[ 37.536073] audit(1205656587.399:2): operation="inode_permission" request_mask="a::" denied_mask="a::" name="/dev/tty" pid=5002 profile="/usr/sbin/cupsd" namespace="default"
[ 37.588424] apm: BIOS version 1.2 Flags 0x02 (Driver version 1.16ac)
[ 37.588428] apm: overridden by ACPI.
[ 93.543341] Marking TSC unstable due to: cpufreq changes.
[ 93.552374] Time: acpi_pm clocksource has been installed.
[ 93.820144] Clocksource tsc unstable (delta = -161794967 ns)
[ 97.602519] NET: Registered protocol family 17
[ 115.457204] NET: Registered protocol family 10
[ 115.458066] lo: Disabled Privacy Extensions
[ 125.730912] eth0: no IPv6 routers present
[ 54.600013] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 54.636617] ISO 9660 Extensions: RRIP_1991A
[ 55.237944] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 55.368297] ISO 9660 Extensions: RRIP_1991A
