Ciao,
Ho cercato di trovare una soluzione al mio problema ma non ci sono riuscito.
Dopo il passaggio da Gutsy ad Hardy non riesco più a collegarmi con la rete wireless.
" lspci > 06:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG Network Connection (rev 02)"
$ lsmod
Module Size Used by
ipv6 255044 14
rfcomm 39188 2
l2cap 23300 13 rfcomm
bluetooth 56964 4 rfcomm,l2cap
sonypi 22408 0
ppdev 9348 0
acpi_cpufreq 7820 0
cpufreq_ondemand 8084 1
cpufreq_conservative 7200 0
cpufreq_userspace 4120 0
cpufreq_stats 5124 0
freq_table 4484 3 acpi_cpufreq,cpufreq_ondemand,cpufreq_stats
cpufreq_powersave 1792 0
container 4736 0
sbs 14216 0
sbshc 6784 1 sbs
dock 10124 0
iptable_filter 2944 0
ip_tables 13000 1 iptable_filter
x_tables 14852 1 ip_tables
sbp2 22920 0
parport_pc 35108 0
lp 11332 0
parport 35912 3 ppdev,parport_pc,lp
joydev 11840 0
pcmcia 39852 0
nvidia 7822720 36
i2c_core 23696 1 nvidia
sony_laptop 34512 0
video 19216 0
output 3712 1 video
tifm_7xx1 7680 0
serio_raw 7044 0
tifm_core 9748 1 tifm_7xx1
psmouse 39056 0
yenta_socket 26380 1
rsrc_nonstatic 12800 1 yenta_socket
pcmcia_core 39440 3 pcmcia,yenta_socket,rsrc_nonstatic
button 8336 0
battery 13316 0
ac 6020 0
intel_agp 24596 0
shpchp 33428 0
pci_hotplug 29728 1 shpchp
agpgart 33328 2 nvidia,intel_agp
iTCO_wdt 11808 0
iTCO_vendor_support 3972 1 iTCO_wdt
evdev 11776 8
pcspkr 3072 0
rtc 13212 0
ext3 132872 3
jbd 43028 1 ext3
mbcache 8192 1 ext3
sg 36256 0
sr_mod 16804 0
cdrom 36512 1 sr_mod
sd_mod 29584 8
pata_acpi 7424 0
usbhid 30592 0
hid 36480 1 usbhid
ata_piix 18692 7
ata_generic 7428 0
ohci1394 32688 0
e100 36108 0
mii 5504 1 e100
ieee1394 92216 2 sbp2,ohci1394
libata 159600 3 pata_acpi,ata_piix,ata_generic
scsi_mod 151180 5 sbp2,sg,sr_mod,sd_mod,libata
ehci_hcd 36364 0
uhci_hcd 25616 0
usbcore 143724 4 usbhid,ehci_hcd,uhci_hcd
thermal 15772 0
processor 28080 3 acpi_cpufreq,thermal
fan 4740 0
fbcon 41888 0
tileblit 2560 1 fbcon
font 8576 1 fbcon
bitblit 5888 1 fbcon
softcursor 2176 1 bitblit
fuse 48404 7
Ringrazio comunque chi avrà la pazienza di aiutarmi.
Non sono riuscito a mettere il testo in un riquadro.
wireless Intel Corporation PRO/Wireless 3945ABG
-
Jano .
- Entusiasta Emergente
- Messaggi: 2014
- Iscrizione: lunedì 16 aprile 2007, 12:05
- Desktop: Gnome
- Distribuzione: Ubuntu 14.04 - User # 19647
- Sesso: Maschile
- Contatti:
Re: wireless Intel Corporation PRO/Wireless 3945ABG
Ciao,
In effetti con i nuovi driver per la ipw3945 bisogna abituarsi perchè ti crea le 2 intefaccie.
Controlla di avere attivato i "Restricted Driver" sulla interfaccia e carica i driver "iwl" e non "ipw"
Successivamente (se non lo è già) prova a metterla in "UP" con:
sudo ifconfig wlan* up (wlan* è il nome interfaccia)
controlla la situazione con:
e
Per vedere se ora viene caricata.
Se hai un notebook i led del wireless non funzionano più, a mè personalmente viene riconosciuta (anche se ho messo il modulo in Black-list perchè uso altri dispositivi Wireless)
Ciao, Jano
In effetti con i nuovi driver per la ipw3945 bisogna abituarsi perchè ti crea le 2 intefaccie.
Controlla di avere attivato i "Restricted Driver" sulla interfaccia e carica i driver "iwl" e non "ipw"
Codice: Seleziona tutto
sudo modprobe iwl3945sudo ifconfig wlan* up (wlan* è il nome interfaccia)
controlla la situazione con:
Codice: Seleziona tutto
iwconfigCodice: Seleziona tutto
ifconfigSe hai un notebook i led del wireless non funzionano più, a mè personalmente viene riconosciuta (anche se ho messo il modulo in Black-list perchè uso altri dispositivi Wireless)
Ciao, Jano
Ultima modifica di Anonymous il lunedì 24 marzo 2008, 12:33, modificato 1 volta in totale.
Sito Web: http://www.janoweb.net
Wireless: ALFA-AWUS036H, AWUS050NH, D-Link DWL-G650, D-Link DWL-G122, ZyXel G220, Linksys WUB54GR, Intel PRO/Wireless 3945ABG
Wireless: ALFA-AWUS036H, AWUS050NH, D-Link DWL-G650, D-Link DWL-G122, ZyXel G220, Linksys WUB54GR, Intel PRO/Wireless 3945ABG
Re: wireless Intel Corporation PRO/Wireless 3945ABG
Ti ringrazio per la risposta, ma anche se ho fatto mille prove non riesco a caricare i drive.
Sono sempre al punto di partenza...non esiste la scheda wireless sul mio portatile.
Tornerò al mio vecchio S.O.
Ciao e scusa per il disturbo.
Sono sempre al punto di partenza...non esiste la scheda wireless sul mio portatile.
Tornerò al mio vecchio S.O.
Ciao e scusa per il disturbo.
-
Jano .
- Entusiasta Emergente
- Messaggi: 2014
- Iscrizione: lunedì 16 aprile 2007, 12:05
- Desktop: Gnome
- Distribuzione: Ubuntu 14.04 - User # 19647
- Sesso: Maschile
- Contatti:
Re: wireless Intel Corporation PRO/Wireless 3945ABG
L' interfaccia la deve vedere, fai un'altra prova per curiosità
ed alla fine scrivi
Riavvia il sistema con l'interfaccia col wireless ATTIVO
Anche perchè questi sono i nuovi driver definitivi che saranno usati da Hardy, già implementati nei nuovi "compact-wireless"
Ciao, Jano
Codice: Seleziona tutto
sudo gedit /etc/modulesCodice: Seleziona tutto
iwl3945Anche perchè questi sono i nuovi driver definitivi che saranno usati da Hardy, già implementati nei nuovi "compact-wireless"
Ciao, Jano
Ultima modifica di Anonymous il lunedì 24 marzo 2008, 16:15, modificato 1 volta in totale.
Sito Web: http://www.janoweb.net
Wireless: ALFA-AWUS036H, AWUS050NH, D-Link DWL-G650, D-Link DWL-G122, ZyXel G220, Linksys WUB54GR, Intel PRO/Wireless 3945ABG
Wireless: ALFA-AWUS036H, AWUS050NH, D-Link DWL-G650, D-Link DWL-G122, ZyXel G220, Linksys WUB54GR, Intel PRO/Wireless 3945ABG
Re: wireless Intel Corporation PRO/Wireless 3945ABG
Codice: Seleziona tutto
1:00.0
[ 16.718467] PCI: Bridge: 0000:00:01.0
[ 16.718468] IO window: disabled.
[ 16.718472] MEM window: d0000000-d1ffffff
[ 16.718474] PREFETCH window: b0000000-bfffffff
[ 16.718478] PCI: Bridge: 0000:00:1c.0
[ 16.718481] IO window: 2000-2fff
[ 16.718486] MEM window: c8000000-c9ffffff
[ 16.718491] PREFETCH window: c0000000-c1ffffff
[ 16.718496] PCI: Bridge: 0000:00:1c.1
[ 16.718499] IO window: 3000-3fff
[ 16.718505] MEM window: ca000000-cbffffff
[ 16.718509] PREFETCH window: c2000000-c3ffffff
[ 16.718515] PCI: Bridge: 0000:00:1c.2
[ 16.718517] IO window: 4000-4fff
[ 16.718523] MEM window: cc000000-cdffffff
[ 16.718527] PREFETCH window: c4000000-c5ffffff
[ 16.718533] PCI: Bridge: 0000:00:1c.3
[ 16.718536] IO window: 5000-5fff
[ 16.718541] MEM window: ce000000-cfffffff
[ 16.718546] PREFETCH window: c6000000-c7ffffff
[ 16.718558] PCI: Bus 11, cardbus bridge: 0000:0a:03.0
[ 16.718560] IO window: 00006400-000064ff
[ 16.718565] IO window: 00006800-000068ff
[ 16.718570] PREFETCH window: 50000000-53ffffff
[ 16.718575] MEM window: 54000000-57ffffff
[ 16.718580] PCI: Bridge: 0000:00:1e.0
[ 16.718583] IO window: 6000-6fff
[ 16.718588] MEM window: d2000000-d20fffff
[ 16.718592] PREFETCH window: disabled.
[ 16.718608] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 16.718613] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 16.718634] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 16.718640] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 16.718662] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16
[ 16.718667] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 16.718689] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 16.718695] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 16.718717] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 21 (level, low) -> IRQ 19
[ 16.718723] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[ 16.718733] PCI: Enabling device 0000:00:1e.0 (0004 -> 0007)
[ 16.718739] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 16.718756] PCI: Enabling device 0000:0a:03.0 (0000 -> 0003)
[ 16.718760] ACPI: PCI Interrupt 0000:0a:03.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 16.718774] NET: Registered protocol family 2
[ 16.756002] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 16.756201] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 16.756922] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[ 16.757124] TCP: Hash tables configured (established 131072 bind 65536)
[ 16.757126] TCP reno registered
[ 16.768059] checking if image is initramfs... it is
[ 17.179344] Switched to high resolution mode on CPU 0
[ 17.446660] Freeing initrd memory: 6950k freed
[ 17.446803] Simple Boot Flag at 0x36 set to 0x1
[ 17.447258] audit: initializing netlink socket (disabled)
[ 17.447271] audit(1206378056.352:1): initialized
[ 17.447417] highmem bounce pool size: 64 pages
[ 17.449079] VFS: Disk quotas dquot_6.5.1
[ 17.449102] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 17.449222] io scheduler noop registered
[ 17.449224] io scheduler anticipatory registered
[ 17.449226] io scheduler deadline registered
[ 17.449236] io scheduler cfq registered (default)
[ 17.449336] Boot video device is 0000:01:00.0
[ 17.449440] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 17.449471] assign_interrupt_mode Found MSI capability
[ 17.449498] Allocate Port Service[0000:00:01.0:pcie00]
[ 17.449567] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 17.449621] assign_interrupt_mode Found MSI capability
[ 17.449663] Allocate Port Service[0000:00:1c.0:pcie00]
[ 17.449693] Allocate Port Service[0000:00:1c.0:pcie02]
[ 17.449784] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 17.449838] assign_interrupt_mode Found MSI capability
[ 17.449880] Allocate Port Service[0000:00:1c.1:pcie00]
[ 17.449912] Allocate Port Service[0000:00:1c.1:pcie02]
[ 17.450004] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 17.450058] assign_interrupt_mode Found MSI capability
[ 17.450100] Allocate Port Service[0000:00:1c.2:pcie00]
[ 17.450129] Allocate Port Service[0000:00:1c.2:pcie02]
[ 17.450223] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[ 17.450276] assign_interrupt_mode Found MSI capability
[ 17.450319] Allocate Port Service[0000:00:1c.3:pcie00]
[ 17.450349] Allocate Port Service[0000:00:1c.3:pcie02]
[ 17.450579] isapnp: Scanning for PnP cards...
[ 17.804859] isapnp: No Plug & Play device found
[ 17.830271] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 17.831319] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 17.831380] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 17.831463] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 17.835212] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 17.840781] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 17.840785] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 17.840788] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 17.840790] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 17.840792] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 17.850325] mice: PS/2 mouse device common for all mice
[ 17.850420] EISA: Probing bus 0 at eisa.0
[ 17.850427] Cannot allocate resource for EISA slot 1
[ 17.850430] Cannot allocate resource for EISA slot 2
[ 17.850432] Cannot allocate resource for EISA slot 3
[ 17.850434] Cannot allocate resource for EISA slot 4
[ 17.850436] Cannot allocate resource for EISA slot 5
[ 17.850438] Cannot allocate resource for EISA slot 6
[ 17.850448] EISA: Detected 0 cards.
[ 17.850451] cpuidle: using governor ladder
[ 17.850577] NET: Registered protocol family 1
[ 17.850601] Using IPI Shortcut mode
[ 17.850626] registered taskstats version 1
[ 17.850734] Magic number: 0:549:37
[ 17.850805] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 17.850807] EDD information not available.
[ 17.850969] Freeing unused kernel memory: 356k freed
[ 18.052971] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 19.060018] fuse init (API version 7.9)
[ 19.076428] ACPI: SSDT 3FE9395A, 01A8 (r1 SONY J3 20060904 PTL 20050228)
[ 19.076837] ACPI: SSDT 3FE93703, 01D2 (r1 SONY J3 20060904 PTL 20050228)
[ 19.077221] ACPI: CPU0 (power states: C1[C1] C2[C2])
[ 19.077226] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 19.079103] ACPI Exception (thermal-0471): AE_NOT_FOUND, Invalid active threshold [0] [20070126]
[ 19.079957] ACPI: Thermal Zone [TZ00] (52 C)
[ 19.081068] ACPI Exception (thermal-0471): AE_NOT_FOUND, Invalid active threshold [0] [20070126]
[ 19.081919] ACPI: Thermal Zone [TZ01] (52 C)
[ 19.711506] usbcore: registered new interface driver usbfs
[ 19.711528] usbcore: registered new interface driver hub
[ 19.723855] usbcore: registered new device driver usb
[ 19.724926] USB Universal Host Controller Interface driver v3.0
[ 19.724975] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 20
[ 19.724985] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 19.724989] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 19.725213] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 19.725246] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00001800
[ 19.725370] usb usb1: configuration #1 chosen from 1 choice
[ 19.725392] hub 1-0:1.0: USB hub found
[ 19.725397] hub 1-0:1.0: 2 ports detected
[ 19.827379] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17
[ 19.827391] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 19.827396] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 19.827417] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 19.827451] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001820
[ 19.827555] usb usb2: configuration #1 chosen from 1 choice
[ 19.827577] hub 2-0:1.0: USB hub found
[ 19.827582] hub 2-0:1.0: 2 ports detected
[ 19.835493] SCSI subsystem initialized
[ 19.872723] e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
[ 19.872727] e100: Copyright(c) 1999-2006 Intel Corporation
[ 19.903179] libata version 3.00 loaded.
[ 19.931213] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 19.931225] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 19.931230] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 19.931251] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 19.931284] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840
[ 19.931395] usb usb3: configuration #1 chosen from 1 choice
[ 19.931417] hub 3-0:1.0: USB hub found
[ 19.931422] hub 3-0:1.0: 2 ports detected
[ 20.035059] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
[ 20.035072] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 20.035076] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 20.035098] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 20.035130] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001860
[ 20.035234] usb usb4: configuration #1 chosen from 1 choice
[ 20.035256] hub 4-0:1.0: USB hub found
[ 20.035260] hub 4-0:1.0: 2 ports detected
[ 20.139046] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 20
[ 20.139060] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 20.139064] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 20.139086] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 20.142998] ehci_hcd 0000:00:1d.7: debug port 1
[ 20.143005] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 20.143011] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xd2304000
[ 20.170784] usb 2-1: new low speed USB device using uhci_hcd and address 2
[ 20.182759] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 20.182884] usb usb5: configuration #1 chosen from 1 choice
[ 20.182909] hub 5-0:1.0: USB hub found
[ 20.182914] hub 5-0:1.0: 8 ports detected
[ 20.286756] PCI: Enabling device 0000:0a:08.0 (0000 -> 0003)
[ 20.286766] ACPI: PCI Interrupt 0000:0a:08.0[A] -> GSI 20 (level, low) -> IRQ 21
[ 20.313902] e100: eth0: e100_probe: addr 0xd2005000, irq 21, MAC addr 00:13:a9:0f:91:da
[ 20.313931] PCI: Enabling device 0000:0a:03.1 (0000 -> 0002)
[ 20.313936] ACPI: PCI Interrupt 0000:0a:03.1[A] -> GSI 16 (level, low) -> IRQ 16
[ 20.363639] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[d2006000-d20067ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 20.371198] ata_piix 0000:00:1f.1: version 2.12
[ 20.371214] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
[ 20.371246] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 20.373790] scsi0 : ata_piix
[ 20.374281] scsi1 : ata_piix
[ 20.374798] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1880 irq 14
[ 20.374802] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1888 irq 15
[ 20.710672] ata1.00: ATAPI: PIONEER DVD-RW DVR-K16M, 1.00, max UDMA/33
[ 20.898589] ata1.00: configured for UDMA/33
[ 20.898633] ata2: port disabled. ignoring.
[ 20.907822] scsi 0:0:0:0: CD-ROM PIONEER DVD-RW DVR-K16M 1.00 PQ: 0 ANSI: 5
[ 20.907920] ata_piix 0000:00:1f.2: MAP [ P0 P2 -- -- ]
[ 20.945604] usb 2-1: new low speed USB device using uhci_hcd and address 3
[ 21.061462] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 22
[ 21.061506] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 21.061568] scsi2 : ata_piix
[ 21.061787] scsi3 : ata_piix
[ 21.062639] ata3: SATA max UDMA/133 cmd 0x18c8 ctl 0x18ac bmdma 0x18b0 irq 22
[ 21.062642] ata4: SATA max UDMA/133 cmd 0x18c0 ctl 0x18a8 bmdma 0x18b8 irq 22
[ 21.115643] usb 2-1: configuration #1 chosen from 1 choice
[ 21.133622] usbcore: registered new interface driver hiddev
[ 21.148897] input: USB_PS2 Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1:1.0/input/input2
[ 21.157330] input,hidraw0: USB HID v1.10 Mouse [USB_PS2 Optical Mouse] on usb-0000:00:1d.1-1
[ 21.157348] usbcore: registered new interface driver usbhid
[ 21.157353] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 21.225688] ata3.00: ATA-7: FUJITSU MHV2100BH, 00000025, max UDMA/100
[ 21.225694] ata3.00: 195371568 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 21.242154] ata3.00: configured for UDMA/100
[ 21.408894] scsi 2:0:0:0: Direct-Access ATA FUJITSU MHV2100B 0000 PQ: 0 ANSI: 5
[ 21.421794] Driver 'sr' needs updating - please use bus_type methods
[ 21.427656] Driver 'sd' needs updating - please use bus_type methods
[ 21.470356] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 21.470362] Uniform CD-ROM driver Revision: 3.20
[ 21.470427] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 21.475444] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 21.475460] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 21.475602] sd 2:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
[ 21.475614] sd 2:0:0:0: [sda] Write Protect is off
[ 21.475617] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 21.475631] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 21.475889] sd 2:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
[ 21.475899] sd 2:0:0:0: [sda] Write Protect is off
[ 21.475901] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 21.475916] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 21.475919] sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 >
[ 21.620765] sd 2:0:0:0: [sda] Attached SCSI disk
[ 21.636644] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0800460301fa9d76]
[ 22.017749] Attempting manual resume
[ 22.017753] swsusp: Resume From Partition 8:6
[ 22.017755] PM: Checking swsusp image.
[ 22.017969] PM: Resume from disk failed.
[ 22.054522] kjournald starting. Commit interval 5 seconds
[ 22.054534] EXT3-fs: mounted filesystem with ordered data mode.
[ 29.101760] Real Time Clock Driver v1.12ac
[ 29.880894] iTCO_vendor_support: vendor-support=0
[ 29.881971] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[ 29.887277] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
[ 29.887562] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 29.891795] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 29.905438] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 29.910007] Linux agpgart interface v0.102
[ 29.931732] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 29.947921] intel_rng: FWH not detected
[ 30.387042] ACPI: AC Adapter [ADP1] (on-line)
[ 30.479140] ACPI: Battery Slot [BAT0] (battery absent)
[ 30.504032] input: Lid Switch as /devices/virtual/input/input4
[ 30.523153] ACPI: Lid Switch [LID0]
[ 30.523213] input: Power Button (CM) as /devices/virtual/input/input5
[ 30.551113] ACPI: Power Button (CM) [PWRB]
[ 30.619954] Yenta: CardBus bridge found at 0000:0a:03.0 [104d:81ef]
[ 30.619977] Yenta: Using CSCINT to route CSC interrupts to PCI
[ 30.619979] Yenta: Routing CardBus interrupts to PCI
[ 30.619985] Yenta TI: socket 0000:0a:03.0, mfunc 0x01131b22, devctl 0x64
[ 30.851420] Yenta: ISA IRQ mask 0x0cf8, PCI irq 16
[ 30.851425] Socket status: 30000006
[ 30.851428] Yenta: Raising subordinate bus# of parent bus (#0a) from #0b to #0e
[ 30.851433] pcmcia: parent PCI bridge I/O window: 0x6000 - 0x6fff
[ 30.851436] cs: IO port probe 0x6000-0x6fff: clean.
[ 30.851683] pcmcia: parent PCI bridge Memory window: 0xd2000000 - 0xd20fffff
[ 30.890585] PCI: Enabling device 0000:0a:03.2 (0000 -> 0002)
[ 30.890594] ACPI: PCI Interrupt 0000:0a:03.2[B] -> GSI 17 (level, low) -> IRQ 17
[ 30.987246] input: PS/2 Mouse as /devices/virtual/input/input6
[ 31.030339] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio4/input/input7
[ 31.713719] sony-laptop: Sony Notebook Control Driver v0.5.
[ 31.725957] input: Sony Vaio Keys as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:2a/SNY5001:00/input/input8
[ 31.757353] input: Sony Vaio Jogdial as /devices/virtual/input/input9
[ 31.786024] sony-laptop: detected Sony Vaio FE Series
[ 32.034639] nvidia: module license 'NVIDIA' taints kernel.
[ 32.112811] e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
[ 32.628546] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 32.628557] PCI: Setting latency timer of device 0000:01:00.0 to 64
[ 32.628669] NVRM: loading NVIDIA UNIX x86 Kernel Module 169.12 Thu Feb 14 17:53:07 PST 2008
[ 33.688842] cs: IO port probe 0x100-0x3af: clean.
[ 33.690796] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[ 33.691617] cs: IO port probe 0x820-0x8ff: clean.
[ 33.692295] cs: IO port probe 0xc00-0xcf7: clean.
[ 33.693127] cs: IO port probe 0xa00-0xaff: clean.
[ 43.137651] lp: driver loaded but no devices found
[ 43.371442] Adding 2000052k swap on /dev/sda6. Priority:-1 extents:1 across:2000052k
[ 44.121832] EXT3 FS on sda7, internal journal
[ 45.509376] kjournald starting. Commit interval 5 seconds
[ 45.509796] EXT3 FS on sda8, internal journal
[ 45.509802] EXT3-fs: mounted filesystem with ordered data mode.
[ 46.018876] kjournald starting. Commit interval 5 seconds
[ 46.019267] EXT3 FS on sda9, internal journal
[ 46.019272] EXT3-fs: mounted filesystem with ordered data mode.
[ 48.942793] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 49.496533] ACPI: ACPI Dock Station Driver
[ 52.554315] ppdev: user-space parallel port driver
[ 53.036775] audit(1206374492.374:2): operation="inode_permission" request_mask="a::" denied_mask="a::" name="/dev/tty" pid=4890 profile="/usr/sbin/cupsd" namespace="default"
[ 53.103213] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 53.103217] apm: overridden by ACPI.
[ 53.253506] sonypi: Sony Programmable I/O Controller Driver v1.26.
[ 53.253965] sonypi: please try the sony-laptop module instead and report failures, see also http://www.linux.it/~malattia/wiki/index.php/Sony_drivers
[ 53.254719] sonypi: detected type3 model, verbose = 0, fnkeyinit = off, camera = off, compat = off, mask = 0xffffffff, useinput = on, acpi = on
[ 53.254724] sonypi: enabled at irq=11, port1=0x1080, port2=0x1084
[ 53.254726] sonypi: device allocated minor is 63
[ 53.256047] input: Sony Vaio Jogdial as /devices/platform/sonypi/input/input10
[ 53.280789] input: Sony Vaio Keys as /devices/platform/sonypi/input/input11
[ 53.359994] sonypi command failed at /build/buildd/linux-2.6.24/drivers/char/sonypi.c : sonypi_call1 (line 652)
[ 53.399096] sonypi command failed at /build/buildd/linux-2.6.24/drivers/char/sonypi.c : sonypi_call2 (line 663)
[ 53.438184] sonypi command failed at /build/buildd/linux-2.6.24/drivers/char/sonypi.c : sonypi_call2 (line 665)
[ 53.477278] sonypi command failed at /build/buildd/linux-2.6.24/drivers/char/sonypi.c : sonypi_call1 (line 652)
[ 53.787815] Bluetooth: Core ver 2.11
[ 53.788673] NET: Registered protocol family 31
[ 53.788678] Bluetooth: HCI device and connection manager initialized
[ 53.788682] Bluetooth: HCI socket layer initialized
[ 53.858547] Bluetooth: L2CAP ver 2.9
[ 53.858554] Bluetooth: L2CAP socket layer initialized
[ 53.934195] Bluetooth: RFCOMM socket layer initialized
[ 53.934527] Bluetooth: RFCOMM TTY layer initialized
[ 53.934530] Bluetooth: RFCOMM ver 1.8
[ 57.353078] NET: Registered protocol family 10
[ 57.353352] lo: Disabled Privacy Extensions
[ 69.113000] eth0: no IPv6 routers present
nico@Vaub:~$ lsmod
Module Size Used by
ipv6 255044 12
rfcomm 39188 2
l2cap 23300 13 rfcomm
bluetooth 56964 4 rfcomm,l2cap
sonypi 22408 0
ppdev 9348 0
acpi_cpufreq 7820 0
cpufreq_ondemand 8084 1
cpufreq_conservative 7200 0
cpufreq_userspace 4120 0
cpufreq_stats 5124 0
freq_table 4484 3 acpi_cpufreq,cpufreq_ondemand,cpufreq_stats
cpufreq_powersave 1792 0
container 4736 0
sbs 14216 0
sbshc 6784 1 sbs
dock 10124 0
iptable_filter 2944 0
ip_tables 13000 1 iptable_filter
x_tables 14852 1 ip_tables
sbp2 22920 0
parport_pc 35108 0
lp 11332 0
parport 35912 3 ppdev,parport_pc,lp
joydev 11840 0
pcmcia 39852 0
nvidia 7822720 36
i2c_core 23696 1 nvidia
sony_laptop 34512 0
video 19216 0
output 3712 1 video
tifm_7xx1 7680 0
serio_raw 7044 0
tifm_core 9748 1 tifm_7xx1
psmouse 39056 0
yenta_socket 26380 1
rsrc_nonstatic 12800 1 yenta_socket
pcmcia_core 39440 3 pcmcia,yenta_socket,rsrc_nonstatic
button 8336 0
battery 13316 0
ac 6020 0
shpchp 33428 0
intel_agp 24596 0
agpgart 33328 2 nvidia,intel_agp
pci_hotplug 29728 1 shpchp
pcspkr 3072 0
iTCO_wdt 11808 0
iTCO_vendor_support 3972 1 iTCO_wdt
evdev 11776 8
rtc 13212 0
ext3 132872 3
jbd 43028 1 ext3
mbcache 8192 1 ext3
sg 36256 0
sd_mod 29584 8
sr_mod 16804 1
cdrom 36512 1 sr_mod
pata_acpi 7424 0
usbhid 30592 0
hid 36480 1 usbhid
ata_piix 18692 8
ata_generic 7428 0
ohci1394 32688 0
e100 36108 0
mii 5504 1 e100
ieee1394 92216 2 sbp2,ohci1394
libata 159600 3 pata_acpi,ata_piix,ata_generic
scsi_mod 151180 5 sbp2,sg,sd_mod,sr_mod,libata
ehci_hcd 36364 0
uhci_hcd 25616 0
usbcore 143724 4 usbhid,ehci_hcd,uhci_hcd
thermal 15772 0
processor 28080 3 acpi_cpufreq,thermal
fan 4740 0
fbcon 41888 0
tileblit 2560 1 fbcon
font 8576 1 fbcon
bitblit 5888 1 fbcon
softcursor 2176 1 bitblit
fuse 48404 7
nico@Vaub:~$ lspci
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
00:01.0 PCI bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express PCI Express Root Port (rev 03)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 02)
00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 (rev 02)
00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02)
01:00.0 VGA compatible controller: nVidia Corporation G72M [GeForce Go 7400] (rev a1)
06:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG Network Connection (rev 02)
0a:03.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller
0a:03.1 FireWire (IEEE 1394): Texas Instruments PCIxx12 OHCI Compliant IEEE 1394 Host Controller
0a:03.2 Mass storage controller: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD)
0a:08.0 Ethernet controller: Intel Corporation PRO/100 VE Network Connection (rev 02)
nico@Vaub:~$
Re: wireless Intel Corporation PRO/Wireless 3945ABG
io ho la tua stessa identica periferica e mi ha funzionato sin dall'inizio senza nessun problema (non usa driver 'ristretti' infatti nella lista dei restricted drivers c'è solo la scheda grafica nVidia)... hai provato a fare un'installazione da zero?
Chi c’è in linea
Visualizzano questa sezione: 0 utenti iscritti e 1 ospite