Installazione stampante RX700

[cyberciro]

Buonasera a tutti!
Eccomi di nuovo qui ... con un nuovo problema ...
Dovrei installare la stampante multifunzione epson rx700
Ho tentato di farlo con il programmino di kde ma ha solo i driver per la rx600 ... come faccio?

Posso farlo o devo rinunciare alla stampante?

[mefisto]

cerca qui http://www.linuxprinting.org/printer_list.cgi

[mefisto]

la tua stampante è abbastanza recente mi sembra di capire...prova con i driver della vecchia rx600 o di qualke altra stampante della serie rx che riesci a trovare...io ho un canon ip1600 e ho rinunciato... >:(

[mefisto]

prova a scaricare i sorgenti qui http://sourceforge.net/project/showfile ... up_id=1537
dell'ultima vers dei Gutenprint...prova un pò che ci cavi.

[cyberciro]

Provo a vedere ... ma mi sa che è il caso che per Linux configuro la mia vecchia stampante per linux e su win uso quella nuova....

[cyberciro]

Uppo questo 3d in quanto ho finalmente provato a installare i driver!
Ho una serie di problemi ... ho tentato di istallare gutemberg come specificato nel file install.txt:

davide@kubuntu:~/Desktop/gutenprint-5.0.0-rc2/gutenprint-5.0.0-rc2$ sudo ./configure
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking how to create a ustar tar archive... gnutar
checking build system type... i686-pc-linux
checking host system type... i686-pc-linux
checking for gcc... gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ANSI C... none needed
checking for a sed that does not truncate output... /bin/sed
checking for egrep... grep -E
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for /usr/bin/ld option to reload object files... -r
checking for BSD-compatible nm... /usr/bin/nm -B
checking whether ln -s works... yes
checking how to recognise dependent libraries... pass_all
checking how to run the C preprocessor... gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking dlfcn.h usability... yes
checking dlfcn.h presence... yes
checking for dlfcn.h... yes
checking for g++... g++
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking how to run the C++ preprocessor... g++ -E
checking for g77... no
checking for f77... no
checking for xlf... no
checking for frt... no
checking for pgf77... no
checking for fort77... no
checking for fl32... no
checking for af77... no
checking for f90... no
checking for xlf90... no
checking for pgf90... no
checking for epcf90... no
checking for f95... no
checking for fort... no
checking for xlf95... no
checking for ifc... no
checking for efc... no
checking for pgf95... no
checking for lf95... no
checking for gfortran... no
checking whether we are using the GNU Fortran 77 compiler... no
checking whether  accepts -g... no
checking the maximum length of command line arguments... 32768
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for objdir... .libs
checking for ar... ar
checking for ranlib... ranlib
checking for strip... strip
checking if gcc static flag  works... yes
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC
checking if gcc PIC flag -fPIC works... yes
checking if gcc supports -c -o file.o... yes
checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking for shl_load... no
checking for shl_load in -ldld... no
checking for dlopen... no
checking for dlopen in -ldl... yes
checking whether a program can dlopen itself... yes
checking whether a statically linked program can dlopen itself... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
configure: creating libtool
appending configuration tag "CXX" to libtool
checking for ld used by g++... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes
checking for g++ option to produce PIC... -fPIC
checking if g++ PIC flag -fPIC works... yes
checking if g++ supports -c -o file.o... yes
checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking for shl_load... (cached) no
checking for shl_load in -ldld... (cached) no
checking for dlopen... (cached) no
checking for dlopen in -ldl... (cached) yes
checking whether a program can dlopen itself... (cached) yes
checking whether a statically linked program can dlopen itself... (cached) yes
appending configuration tag "F77" to libtool
checking whether to enable maintainer-specific portions of Makefiles... no
checking for cups-config... /usr/bin/cups-config
checking whether to whether to build CUPS driver... yes
checking whether to build CUPS PPD files... yes
checking whether to build translated CUPS PPD files... yes
checking whether to place CUPS PPD files at top level... no
checking whether to generate PostScript level 3 PPD files... yes
checking whether to build a statically-linked cups-genppd and rastertogutenprint... yes
checking for foomatic-configure... /usr/bin/foomatic-configure
checking whether to build foomatic data files... yes
checking for foomatic-ppdfile... /usr/bin/foomatic-ppdfile
checking whether to make use of foomatic 3 extra features... yes
checking for ijs-config... no
checking whether to build Ghostscript driver... no
checking whether to enable loadable modules... (automatic)
checking whether to turn on debugging in build... no
checking whether to turn on profiling in build... no
checking whether to use readline... yes
checking for gimptool-1.2... no
checking for gimptool... no
checking for gtk-config... no
checking for GTK - version >= 1.2.0... no
*** The gtk-config script installed by GTK could not be found
*** If GTK was installed in PREFIX, make sure PREFIX/bin is in
*** your path, or set the GTK_CONFIG environment variable to the
*** full path to gtk-config.
checking whether to build GIMP 1.2 Print plugin... no
checking whether to build Gutenprint GTK+-1.2 user interface library... no
checking for gimptool-2.0... no
checking for gimptool... no
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking for GTK2... checking whether to build GIMP 2.0 Print plugin... no
checking whether to build Gutenprint GTK+-2.0 user interface library... no
checking whether to install sample images... yes
checking whether to install user guide... yes
checking whether to build escputil... yes
checking whether to build test programs... yes
checking whether to build testpattern generator... yes
checking whether to install GIMP plugin in home directory... no
checking for library containing strerror... none required
checking for gawk... (cached) mawk
checking for gcc... (cached) gcc
checking whether we are using the GNU C compiler... (cached) yes
checking whether gcc accepts -g... (cached) yes
checking for gcc option to accept ANSI C... (cached) none needed
checking for gcc... (cached) gcc
checking whether we are using the GNU C compiler... (cached) yes
checking whether gcc accepts -g... (cached) yes
checking for gcc option to accept ANSI C... (cached) none needed
checking for a BSD-compatible install... /usr/bin/install -c
checking whether ln -s works... yes
checking for flex... no
checking for lex... no
checking for yywrap in -lfl... no
checking for yywrap in -ll... no
checking for bison... no
checking for byacc... no
checking for find... /usr/bin/find
checking for perl... /usr/bin/perl
checking for glib-mkenums... /usr/bin/glib-mkenums
checking for convert... /usr/bin/convert
checking for texi2html... no
checking for dvips... /usr/bin/dvips
checking for db2pdf... no
checking for dvipdf... /usr/bin/dvipdf
checking for db2ps... no
checking for db2html... no
checking for doxygen... no
checking for dialog... no
checking for foomatic-kitload... /usr/sbin/foomatic-kitload
checking for msgfmt... /usr/bin/msgfmt
checking for gmsgfmt... /usr/bin/msgfmt
checking for xgettext... /usr/bin/xgettext
checking for msgmerge... /usr/bin/msgmerge
checking for ld used by GCC... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for shared library run path origin... done
checking whether NLS is requested... yes
checking for GNU gettext in libc... yes
checking if gcc supports -Wall... yes
checking if gcc supports -Wcast-align... yes
checking if gcc supports -Wstrict-prototypes... yes
checking if gcc supports -Wmissing-prototypes... yes
checking if gcc supports -Wmissing-declarations... yes
checking if gcc supports -Wnested-externs... yes
checking if gcc supports -Wwrite-strings... yes
checking if gcc supports -Werror-implicit-function-declaration... yes
checking if gcc supports -Winline... yes
checking if gcc supports -finline-limit=1048576... yes
checking if gcc supports __attribute__ syntax... yes
checking for readline in -lreadline... no
checking for readline in -lreadline... no
checking for readline in -lreadline... no
checking for readline in -lreadline... no
checking for lt_dlopen in -lltdl... no
checking for dlopen in -ldl... (cached) yes
checking for pow in -lm... yes
checking for pow in -lm... (cached) yes
checking for gzgets in -lz... yes
checking for cups-config... (cached) /usr/bin/cups-config
checking for ANSI C header files... (cached) yes
checking getopt.h usability... yes
checking getopt.h presence... yes
checking for getopt.h... yes
checking readline/readline.h usability... no
checking readline/readline.h presence... no
checking for readline/readline.h... no
checking for dlfcn.h... (cached) yes
checking fcntl.h usability... yes
checking fcntl.h presence... yes
checking for fcntl.h... yes
checking limits.h usability... yes
checking limits.h presence... yes
checking for limits.h... yes
checking locale.h usability... yes
checking locale.h presence... yes
checking for locale.h... yes
checking ltdl.h usability... no
checking ltdl.h presence... no
checking for ltdl.h... no
checking stdarg.h usability... yes
checking stdarg.h presence... yes
checking for stdarg.h... yes
checking for stdlib.h... (cached) yes
checking for string.h... (cached) yes
checking sys/time.h usability... yes
checking sys/time.h presence... yes
checking for sys/time.h... yes
checking for sys/types.h... (cached) yes
checking time.h usability... yes
checking time.h presence... yes
checking for time.h... yes
checking for unistd.h... (cached) yes
checking for an ANSI C-conforming const... yes
checking for inline... inline
checking for off_t... yes
checking for size_t... yes
checking return type of signal handlers... void
checking for nanosleep... yes
checking for poll... yes
checking for usleep... yes
checking for getopt_long... yes
checking which module system will be used... static
configure: creating ./config.status
config.status: creating Makefile
config.status: creating doc/Makefile
config.status: creating doc/gutenprint.dox
config.status: creating doc/gutenprintui2.dox
config.status: creating doc/developer/Makefile
config.status: creating doc/users_guide/Makefile
config.status: creating include/Makefile
config.status: creating include/gutenprint/Makefile
config.status: creating include/gutenprintui/Makefile
config.status: creating include/gutenprintui2/Makefile
config.status: creating include/gutenprint/gutenprint-version.h
config.status: creating man/Makefile
config.status: creating man/cups-calibrate.8
config.status: creating man/cups-genppd.8
config.status: creating man/cups-genppdconfig.8
config.status: creating man/cups-genppdupdate.8
config.status: creating man/escputil.1
config.status: creating man/ijsgutenprint.1
config.status: creating po/Makefile.in
config.status: creating samples/Makefile
config.status: creating src/Makefile
config.status: creating src/cups/Makefile
config.status: creating src/cups/cups-genppdconfig
config.status: creating src/cups/cups-genppdupdate
config.status: creating src/escputil/Makefile
config.status: creating src/foomatic/Makefile
config.status: creating src/foomatic/foomatic-generator
config.status: creating src/foomatic/mk_printerlist
config.status: creating src/ghost/Makefile
config.status: creating src/testpattern/Makefile
config.status: creating src/gimp/Makefile
config.status: creating src/gimp2/Makefile
config.status: creating src/main/Makefile
config.status: creating src/main/gutenprint.pc
config.status: creating src/gutenprintui/Makefile
config.status: creating src/gutenprintui/gutenprintui.pc
config.status: creating src/gutenprintui2/Makefile
config.status: creating src/gutenprintui2/gutenprintui2.pc
config.status: creating cups-gutenprint.list
config.status: creating test/Makefile
config.status: creating scripts/Makefile
config.status: creating config.h
config.status: config.h is unchanged
config.status: executing default-1 commands
config.status: creating po/POTFILES
config.status: creating po/Makefile
config.status: executing default commands
Finished configuring.
Type 'make' to build the package
then 'make install' to install it.
davide@kubuntu:~/Desktop/gutenprint-5.0.0-rc2/gutenprint-5.0.0-rc2$ sudo make
make  all-recursive
make[1]: Entering directory `/home/davide/Desktop/gutenprint-5.0.0-rc2/gutenprint-5.0.0-rc2'
Making all in include
make[2]: Entering directory `/home/davide/Desktop/gutenprint-5.0.0-rc2/gutenprint-5.0.0-rc2/include'
Making all in gutenprint
make[3]: Entering directory `/home/davide/Desktop/gutenprint-5.0.0-rc2/gutenprint-5.0.0-rc2/include/gutenprint'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/home/davide/Desktop/gutenprint-5.0.0-rc2/gutenprint-5.0.0-rc2/include/gutenprint'
Making all in gutenprintui
make[3]: Entering directory `/home/davide/Desktop/gutenprint-5.0.0-rc2/gutenprint-5.0.0-rc2/include/gutenprintui'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/home/davide/Desktop/gutenprint-5.0.0-rc2/gutenprint-5.0.0-rc2/include/gutenprintui'
Making all in gutenprintui2
make[3]: Entering directory `/home/davide/Desktop/gutenprint-5.0.0-rc2/gutenprint-5.0.0-rc2/include/gutenprintui2'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/home/davide/Desktop/gutenprint-5.0.0-rc2/gutenprint-5.0.0-rc2/include/gutenprintui2'
make[3]: Entering directory `/home/davide/Desktop/gutenprint-5.0.0-rc2/gutenprint-5.0.0-rc2/include'
make[3]: Nothing to be done for `all-am'.
make[3]: Leaving directory `/home/davide/Desktop/gutenprint-5.0.0-rc2/gutenprint-5.0.0-rc2/include'
make[2]: Leaving directory `/home/davide/Desktop/gutenprint-5.0.0-rc2/gutenprint-5.0.0-rc2/include'
Making all in src
make[2]: Entering directory `/home/davide/Desktop/gutenprint-5.0.0-rc2/gutenprint-5.0.0-rc2/src'
Making all in main
make[3]: Entering directory `/home/davide/Desktop/gutenprint-5.0.0-rc2/gutenprint-5.0.0-rc2/src/main'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/home/davide/Desktop/gutenprint-5.0.0-rc2/gutenprint-5.0.0-rc2/src/main'
Making all in gutenprintui
make[3]: Entering directory `/home/davide/Desktop/gutenprint-5.0.0-rc2/gutenprint-5.0.0-rc2/src/gutenprintui'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/home/davide/Desktop/gutenprint-5.0.0-rc2/gutenprint-5.0.0-rc2/src/gutenprintui'
Making all in gutenprintui2
make[3]: Entering directory `/home/davide/Desktop/gutenprint-5.0.0-rc2/gutenprint-5.0.0-rc2/src/gutenprintui2'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/home/davide/Desktop/gutenprint-5.0.0-rc2/gutenprint-5.0.0-rc2/src/gutenprintui2'
Making all in escputil
make[3]: Entering directory `/home/davide/Desktop/gutenprint-5.0.0-rc2/gutenprint-5.0.0-rc2/src/escputil'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/home/davide/Desktop/gutenprint-5.0.0-rc2/gutenprint-5.0.0-rc2/src/escputil'
Making all in gimp
make[3]: Entering directory `/home/davide/Desktop/gutenprint-5.0.0-rc2/gutenprint-5.0.0-rc2/src/gimp'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/home/davide/Desktop/gutenprint-5.0.0-rc2/gutenprint-5.0.0-rc2/src/gimp'
Making all in gimp2
make[3]: Entering directory `/home/davide/Desktop/gutenprint-5.0.0-rc2/gutenprint-5.0.0-rc2/src/gimp2'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/home/davide/Desktop/gutenprint-5.0.0-rc2/gutenprint-5.0.0-rc2/src/gimp2'
Making all in cups
make[3]: Entering directory `/home/davide/Desktop/gutenprint-5.0.0-rc2/gutenprint-5.0.0-rc2/src/cups'
/bin/sh ../../libtool --tag=CC --mode=link gcc  -g -O2  -o epson  epson.o -lcupsimage -ltiff -ljpeg -lpng -lm -lz -lcups -lnsl
gcc -g -O2 -o epson epson.o  -lcupsimage /usr/lib/libtiff.so -lc /usr/lib/libjpeg.so -lpng -lm -lz -lcups -lnsl
/usr/bin/ld: cannot find -lcupsimage
collect2: ld returned 1 exit status
make[3]: *** [epson] Error 1
make[3]: Leaving directory `/home/davide/Desktop/gutenprint-5.0.0-rc2/gutenprint-5.0.0-rc2/src/cups'
make[2]: *** [all-recursive] Error 1
make[2]: Leaving directory `/home/davide/Desktop/gutenprint-5.0.0-rc2/gutenprint-5.0.0-rc2/src'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/home/davide/Desktop/gutenprint-5.0.0-rc2/gutenprint-5.0.0-rc2'
make: *** [all] Error 2
davide@kubuntu:~/Desktop/gutenprint-5.0.0-rc2/gutenprint-5.0.0-rc2$ sudo make install
Making install in include
make[1]: Entering directory `/home/davide/Desktop/gutenprint-5.0.0-rc2/gutenprint-5.0.0-rc2/include'
Making install in gutenprint
make[2]: Entering directory `/home/davide/Desktop/gutenprint-5.0.0-rc2/gutenprint-5.0.0-rc2/include/gutenprint'
make[3]: Entering directory `/home/davide/Desktop/gutenprint-5.0.0-rc2/gutenprint-5.0.0-rc2/include/gutenprint'
make[3]: Nothing to be done for `install-exec-am'.
test -z "/usr/local/include/gutenprint" || mkdir -p -- "/usr/local/include/gutenprint"
/usr/bin/install -c -m 644 'gutenprint-version.h' '/usr/local/include/gutenprint/gutenprint-version.h'
test -z "/usr/local/include/gutenprint" || mkdir -p -- "/usr/local/include/gutenprint"
/usr/bin/install -c -m 644 'gutenprint.h' '/usr/local/include/gutenprint/gutenprint.h'
/usr/bin/install -c -m 644 'gutenprint-module.h' '/usr/local/include/gutenprint/gutenprint-module.h'
/usr/bin/install -c -m 644 'array.h' '/usr/local/include/gutenprint/array.h'
/usr/bin/install -c -m 644 'bit-ops.h' '/usr/local/include/gutenprint/bit-ops.h'
/usr/bin/install -c -m 644 'channel.h' '/usr/local/include/gutenprint/channel.h'
/usr/bin/install -c -m 644 'color.h' '/usr/local/include/gutenprint/color.h'
/usr/bin/install -c -m 644 'curve-cache.h' '/usr/local/include/gutenprint/curve-cache.h'
/usr/bin/install -c -m 644 'curve.h' '/usr/local/include/gutenprint/curve.h'
/usr/bin/install -c -m 644 'dither.h' '/usr/local/include/gutenprint/dither.h'
/usr/bin/install -c -m 644 'sequence.h' '/usr/local/include/gutenprint/sequence.h'
/usr/bin/install -c -m 644 'image.h' '/usr/local/include/gutenprint/image.h'
/usr/bin/install -c -m 644 'list.h' '/usr/local/include/gutenprint/list.h'
/usr/bin/install -c -m 644 'module.h' '/usr/local/include/gutenprint/module.h'
/usr/bin/install -c -m 644 'mxml.h' '/usr/local/include/gutenprint/mxml.h'
/usr/bin/install -c -m 644 'paper.h' '/usr/local/include/gutenprint/paper.h'
/usr/bin/install -c -m 644 'path.h' '/usr/local/include/gutenprint/path.h'
/usr/bin/install -c -m 644 'printers.h' '/usr/local/include/gutenprint/printers.h'
/usr/bin/install -c -m 644 'sequence.h' '/usr/local/include/gutenprint/sequence.h'
/usr/bin/install -c -m 644 'string-list.h' '/usr/local/include/gutenprint/string-list.h'
/usr/bin/install -c -m 644 'util.h' '/usr/local/include/gutenprint/util.h'
/usr/bin/install -c -m 644 'vars.h' '/usr/local/include/gutenprint/vars.h'
/usr/bin/install -c -m 644 'weave.h' '/usr/local/include/gutenprint/weave.h'
/usr/bin/install -c -m 644 'xml.h' '/usr/local/include/gutenprint/xml.h'
make[3]: Leaving directory `/home/davide/Desktop/gutenprint-5.0.0-rc2/gutenprint-5.0.0-rc2/include/gutenprint'
make[2]: Leaving directory `/home/davide/Desktop/gutenprint-5.0.0-rc2/gutenprint-5.0.0-rc2/include/gutenprint'
Making install in gutenprintui
make[2]: Entering directory `/home/davide/Desktop/gutenprint-5.0.0-rc2/gutenprint-5.0.0-rc2/include/gutenprintui'
make[3]: Entering directory `/home/davide/Desktop/gutenprint-5.0.0-rc2/gutenprint-5.0.0-rc2/include/gutenprintui'
make[3]: Nothing to be done for `install-exec-am'.
test -z "/usr/local/include/gutenprintui" || mkdir -p -- "/usr/local/include/gutenprintui"
make[3]: Leaving directory `/home/davide/Desktop/gutenprint-5.0.0-rc2/gutenprint-5.0.0-rc2/include/gutenprintui'
make[2]: Leaving directory `/home/davide/Desktop/gutenprint-5.0.0-rc2/gutenprint-5.0.0-rc2/include/gutenprintui'
Making install in gutenprintui2
make[2]: Entering directory `/home/davide/Desktop/gutenprint-5.0.0-rc2/gutenprint-5.0.0-rc2/include/gutenprintui2'
make[3]: Entering directory `/home/davide/Desktop/gutenprint-5.0.0-rc2/gutenprint-5.0.0-rc2/include/gutenprintui2'
make[3]: Nothing to be done for `install-exec-am'.
test -z "/usr/local/include/gutenprintui2" || mkdir -p -- "/usr/local/include/gutenprintui2"
make[3]: Leaving directory `/home/davide/Desktop/gutenprint-5.0.0-rc2/gutenprint-5.0.0-rc2/include/gutenprintui2'
make[2]: Leaving directory `/home/davide/Desktop/gutenprint-5.0.0-rc2/gutenprint-5.0.0-rc2/include/gutenprintui2'
make[2]: Entering directory `/home/davide/Desktop/gutenprint-5.0.0-rc2/gutenprint-5.0.0-rc2/include'
make[3]: Entering directory `/home/davide/Desktop/gutenprint-5.0.0-rc2/gutenprint-5.0.0-rc2/include'
make[3]: Nothing to be done for `install-exec-am'.
make[3]: Nothing to be done for `install-data-am'.
make[3]: Leaving directory `/home/davide/Desktop/gutenprint-5.0.0-rc2/gutenprint-5.0.0-rc2/include'
make[2]: Leaving directory `/home/davide/Desktop/gutenprint-5.0.0-rc2/gutenprint-5.0.0-rc2/include'
make[1]: Leaving directory `/home/davide/Desktop/gutenprint-5.0.0-rc2/gutenprint-5.0.0-rc2/include'
Making install in src
make[1]: Entering directory `/home/davide/Desktop/gutenprint-5.0.0-rc2/gutenprint-5.0.0-rc2/src'
Making install in main
make[2]: Entering directory `/home/davide/Desktop/gutenprint-5.0.0-rc2/gutenprint-5.0.0-rc2/src/main'
make[3]: Entering directory `/home/davide/Desktop/gutenprint-5.0.0-rc2/gutenprint-5.0.0-rc2/src/main'
test -z "/usr/local/lib" || mkdir -p -- "/usr/local/lib"
/bin/sh ../../libtool --mode=install /usr/bin/install -c  'libgutenprint.la' '/usr/local/lib/libgutenprint.la'
/usr/bin/install -c .libs/libgutenprint.so.2.0.0 /usr/local/lib/libgutenprint.so.2.0.0
(cd /usr/local/lib && rm -f libgutenprint.so.2 && ln -s libgutenprint.so.2.0.0 libgutenprint.so.2)
(cd /usr/local/lib && rm -f libgutenprint.so && ln -s libgutenprint.so.2.0.0 libgutenprint.so)
/usr/bin/install -c .libs/libgutenprint.lai /usr/local/lib/libgutenprint.la
/usr/bin/install -c .libs/libgutenprint.a /usr/local/lib/libgutenprint.a
ranlib /usr/local/lib/libgutenprint.a
chmod 644 /usr/local/lib/libgutenprint.a
PATH="$PATH:/sbin" ldconfig -n /usr/local/lib
----------------------------------------------------------------------
Libraries have been installed in:
  /usr/local/lib

If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the `-LLIBDIR'
flag during linking and do at least one of the following:
  - add LIBDIR to the `LD_LIBRARY_PATH' environment variable
    during execution
  - add LIBDIR to the `LD_RUN_PATH' environment variable
    during linking
  - use the `-Wl,--rpath -Wl,LIBDIR' linker flag

See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
test -z "/usr/local/lib/pkgconfig" || mkdir -p -- "/usr/local/lib/pkgconfig"
/usr/bin/install -c -m 644 'gutenprint.pc' '/usr/local/lib/pkgconfig/gutenprint.pc'
test -z "/usr/local/lib/gutenprint/5.0.0-rc2/modules" || mkdir -p -- "/usr/local/lib/gutenprint/5.0.0-rc2/modules"
test -z "/usr/local/share/gutenprint/5.0.0-rc2/xml" || mkdir -p -- "/usr/local/share/gutenprint/5.0.0-rc2/xml"
/usr/bin/install -c -m 644 'dither-matrix-1x1.xml' '/usr/local/share/gutenprint/5.0.0-rc2/xml/dither-matrix-1x1.xml'
/usr/bin/install -c -m 644 'dither-matrix-2x1.xml' '/usr/local/share/gutenprint/5.0.0-rc2/xml/dither-matrix-2x1.xml'
/usr/bin/install -c -m 644 'dither-matrix-4x1.xml' '/usr/local/share/gutenprint/5.0.0-rc2/xml/dither-matrix-4x1.xml'
/usr/bin/install -c -m 644 'papers.xml' '/usr/local/share/gutenprint/5.0.0-rc2/xml/papers.xml'
/usr/bin/install -c -m 644 'printers.xml' '/usr/local/share/gutenprint/5.0.0-rc2/xml/printers.xml'
make[3]: Leaving directory `/home/davide/Desktop/gutenprint-5.0.0-rc2/gutenprint-5.0.0-rc2/src/main'
make[2]: Leaving directory `/home/davide/Desktop/gutenprint-5.0.0-rc2/gutenprint-5.0.0-rc2/src/main'
Making install in gutenprintui
make[2]: Entering directory `/home/davide/Desktop/gutenprint-5.0.0-rc2/gutenprint-5.0.0-rc2/src/gutenprintui'
make[3]: Entering directory `/home/davide/Desktop/gutenprint-5.0.0-rc2/gutenprint-5.0.0-rc2/src/gutenprintui'
test -z "/usr/local/lib" || mkdir -p -- "/usr/local/lib"
test -z "/usr/local/lib/pkgconfig" || mkdir -p -- "/usr/local/lib/pkgconfig"
/usr/bin/install -c -m 644 'gutenprintui.pc' '/usr/local/lib/pkgconfig/gutenprintui.pc'
make[3]: Leaving directory `/home/davide/Desktop/gutenprint-5.0.0-rc2/gutenprint-5.0.0-rc2/src/gutenprintui'
make[2]: Leaving directory `/home/davide/Desktop/gutenprint-5.0.0-rc2/gutenprint-5.0.0-rc2/src/gutenprintui'
Making install in gutenprintui2
make[2]: Entering directory `/home/davide/Desktop/gutenprint-5.0.0-rc2/gutenprint-5.0.0-rc2/src/gutenprintui2'
make[3]: Entering directory `/home/davide/Desktop/gutenprint-5.0.0-rc2/gutenprint-5.0.0-rc2/src/gutenprintui2'
test -z "/usr/local/lib" || mkdir -p -- "/usr/local/lib"
test -z "/usr/local/lib/pkgconfig" || mkdir -p -- "/usr/local/lib/pkgconfig"
/usr/bin/install -c -m 644 'gutenprintui2.pc' '/usr/local/lib/pkgconfig/gutenprintui2.pc'
make[3]: Leaving directory `/home/davide/Desktop/gutenprint-5.0.0-rc2/gutenprint-5.0.0-rc2/src/gutenprintui2'
make[2]: Leaving directory `/home/davide/Desktop/gutenprint-5.0.0-rc2/gutenprint-5.0.0-rc2/src/gutenprintui2'
Making install in escputil
make[2]: Entering directory `/home/davide/Desktop/gutenprint-5.0.0-rc2/gutenprint-5.0.0-rc2/src/escputil'
make[3]: Entering directory `/home/davide/Desktop/gutenprint-5.0.0-rc2/gutenprint-5.0.0-rc2/src/escputil'
test -z "/usr/local/bin" || mkdir -p -- "/usr/local/bin"
  /bin/sh ../../libtool --mode=install /usr/bin/install -c 'escputil' '/usr/local/bin/escputil'
/usr/bin/install -c .libs/escputil /usr/local/bin/escputil
make[3]: Nothing to be done for `install-data-am'.
make[3]: Leaving directory `/home/davide/Desktop/gutenprint-5.0.0-rc2/gutenprint-5.0.0-rc2/src/escputil'
make[2]: Leaving directory `/home/davide/Desktop/gutenprint-5.0.0-rc2/gutenprint-5.0.0-rc2/src/escputil'
Making install in gimp
make[2]: Entering directory `/home/davide/Desktop/gutenprint-5.0.0-rc2/gutenprint-5.0.0-rc2/src/gimp'
make[3]: Entering directory `/home/davide/Desktop/gutenprint-5.0.0-rc2/gutenprint-5.0.0-rc2/src/gimp'
make[3]: Nothing to be done for `install-exec-am'.
test -z "/usr/local/lib/gimp/1.2/plug-ins" || mkdir -p -- "/usr/local/lib/gimp/1.2/plug-ins"
make[3]: Leaving directory `/home/davide/Desktop/gutenprint-5.0.0-rc2/gutenprint-5.0.0-rc2/src/gimp'
make[2]: Leaving directory `/home/davide/Desktop/gutenprint-5.0.0-rc2/gutenprint-5.0.0-rc2/src/gimp'
Making install in gimp2
make[2]: Entering directory `/home/davide/Desktop/gutenprint-5.0.0-rc2/gutenprint-5.0.0-rc2/src/gimp2'
make[3]: Entering directory `/home/davide/Desktop/gutenprint-5.0.0-rc2/gutenprint-5.0.0-rc2/src/gimp2'
make[3]: Nothing to be done for `install-exec-am'.
test -z "" || mkdir -p -- ""
make[3]: Leaving directory `/home/davide/Desktop/gutenprint-5.0.0-rc2/gutenprint-5.0.0-rc2/src/gimp2'
make[2]: Leaving directory `/home/davide/Desktop/gutenprint-5.0.0-rc2/gutenprint-5.0.0-rc2/src/gimp2'
Making install in cups
make[2]: Entering directory `/home/davide/Desktop/gutenprint-5.0.0-rc2/gutenprint-5.0.0-rc2/src/cups'
/bin/sh ../../libtool --tag=CC --mode=link gcc  -g -O2  -o epson  epson.o -lcupsimage -ltiff -ljpeg -lpng -lm -lz -lcups -lnsl
gcc -g -O2 -o epson epson.o  -lcupsimage /usr/lib/libtiff.so -lc /usr/lib/libjpeg.so -lpng -lm -lz -lcups -lnsl
/usr/bin/ld: cannot find -lcupsimage
collect2: ld returned 1 exit status
make[2]: *** [epson] Error 1
make[2]: Leaving directory `/home/davide/Desktop/gutenprint-5.0.0-rc2/gutenprint-5.0.0-rc2/src/cups'
make[1]: *** [install-recursive] Error 1
make[1]: Leaving directory `/home/davide/Desktop/gutenprint-5.0.0-rc2/gutenprint-5.0.0-rc2/src'
make: *** [install-recursive] Error 1

So che è un testo lungo ... ma è pieno di errori!!!
Aiuto!

Grazie!!!