[RISOLTO] Problema avvio: pannelli gnome

Installazione, configurazione e uso di programmi e strumenti.
Scrivi risposta
ronny84
Prode Principiante
Messaggi: 10
Iscrizione: venerdì 20 giugno 2008, 22:15

[RISOLTO] Problema avvio: pannelli gnome

Messaggio da ronny84 »

Salve a tutti sono nuovo del forum e del mondo linux in generale (mmh.. non è vero avevo provato per qualche giorno Mandrivia anni or sono  :P), quindi piacere!
Ho installato Ubuntu qualche giorno fa e sono riuscito a risolvere più o meno tutti i dubbi/problemi sopratutto spulciandomi questo forum. Ora però è successa una cosa che non riesco a sistemare e mi sta tirando pazzo quindi è giunta l'ora di aprire un topic!  :) [fine introduzione]

E' iniziato ieri sera dopo un riavvio (se non ricordo male l'ultima cosa che ho fatto è stata sistemare il mouse per attivare i tasti laterali, ma questo qualche riavvio prima di quello fatidico), carica tutto tranne i pannelli che ci mettono una vita a comparire e diventare attivi. Praticamente ho notato due diverse situazioni:

1) Carica sfondo del desktop, icone ma nessuna barra; dopo qualche minuto appaiono di botto già attive ed utilizzabili come se nulla fosse
2) Carica sfondo del desktop, icone, la barra in alto vuota, poi la barra in basso, appare il menù di gnome su quella in alto (tutto non utilizzabile) e dopo qualche minuto di botto tutti gli altri applet e si attivano i pannelli.

Specifico che anche durante il caricamente di sti bendetti pannelli il sistema per il resto funziona!

Ieri, pensando di aver combinato qualche pasticcio e non riuscendo a sistemare nè con il ripristino nè reinstallando gnome-panel ho formattato la partizione / e reinstallato da 0 il sistema.
Sembrava tutto ok quando poche ore fa riaccendendo il pc... stesso problema!! E questa volta non ho fatto nulla!!  :'( Anzi in verità l'ultima "azione" prima di spegnere è stata attivare il re-indicizzamento del disco tant'è che poi l'ho disattivato e riavviando il problema sembrava essersi risolto! Poi però punto e a capo...

Mi rivolgo quindi a voi sapienti per cercare di svelare l'arcano anche perchè mi sta piacendo Ubuntu come sistema e vorrei poterlo utilizzare senza aspettare 5 minuti ad ogni avvio.. Non saprei che dati fornirvi come base, magari uno screenshot delle applicazioni in avvio se serve (anche se in più ho solo compiz -ottimizzato per nvidia- e lo script per il mouse)!

Grazie anticipatamente!  :(


EDIT: rettifico: il sistema non è perfettamente funzionante si inchioda ad aprire molte cose come ad esempio "alt+f2" (il terminale invece funziona bene).
Ultima modifica di ronny84 il lunedì 30 giugno 2008, 0:47, modificato 1 volta in totale.
Avatar utente
sparazza
Entusiasta Emergente
Entusiasta Emergente
Messaggi: 1117
Iscrizione: giovedì 8 febbraio 2007, 14:47
Distribuzione: Ubuntu Precise
Contatti:

Re: Problema avvio: pannelli gnome

Messaggio da sparazza »

Benvenuto! hai effetto desktop attivati? inoltre che pc hai? configurazione? modello?... per il resto... potrebbe davvero essere il tracker che sta indicizzando tutte le cartelle del sistema per configurare per bene la ricerca. prova a disabilitarlo all'avvio (Sistema->Preferenze->sessioni) o togliendo l'applet dal pannelo(tasto destro, rimuovi)

per il resto.. che versione di ubuntu hai installato? 32 o 64 bit?

Saluti
Sparazza
ronny84
Prode Principiante
Messaggi: 10
Iscrizione: venerdì 20 giugno 2008, 22:15

Re: Problema avvio: pannelli gnome

Messaggio da ronny84 »

Ciao, grazie in primis per la risposta!  :)

Rispondendo alle tue domande il pc in questione è un notebook (mi ero dimenticato di specificarlo nel primo post!  :P) ACER 5720G con Intel Core 2 Duo T1000, scheda video dedicata Gefoce 8400G 256mb, 2gb di ram, 160HD, scheda audio Realtek. (se ti serve sapere altro che ho omesso chiedi pure!)

Gli effetti desktop mi pare siano disattivati o meglio nessuna delle 3 voci è attiva. Ma mi pareva di aver letto che con il compiz manager attivo è giusto che sia così...

Per il tracker effettivamente poteva avere senso che l'indicizzazione inchiodasse il pc e tra l'altro disattivandola e togliendo l'icona dal pannello il primo riavvio successivo era andato bene. Però il problema si è ripresentato e anche despuntando il tracker da Sessioni non si risolve nulla..  :'(

Ho installato l'ultima versione di Ubuntu (hardy 8.04) scaricata tramite torrent direttamente dal sito, versione 32bit, ed ho fatto tutto gli aggiornamenti proposti (saranno stati almeno 200mb!  :o)

Ah tra l'altro ho notato che ora (non so dire da quando, sicuramente appena installato ce n'era solo una!) su grub ho due coppie di voci di avvio per ubuntu una per il kernel 2.6.24.16 e 2.6.24.19. Non so se sia normale o meno comunque stesso problema su entrambi che persiste anche lanciando entrambi i ripristini!

Ora sono un po' di fretta, appena ho due minuti magari scrivo anche le modifiche salienti che ho fatto al sistema, magari l'errore risiede proprio in una di queste!

Grazie ancora!  ;)
Ultima modifica di ronny84 il giovedì 26 giugno 2008, 9:20, modificato 1 volta in totale.
Avatar utente
sparazza
Entusiasta Emergente
Entusiasta Emergente
Messaggi: 1117
Iscrizione: giovedì 8 febbraio 2007, 14:47
Distribuzione: Ubuntu Precise
Contatti:

Re: Problema avvio: pannelli gnome

Messaggio da sparazza »

posso dirti innanzitutto questo.. installa la versione corretta di ubuntu e riparliamo, il tuo processore è un 64 bit e la tua ubuntu è a 32! per il resto prima di reinstallare Ubuntu fai questa prova:
avvia il pc, cronometra + o meno il tempo impiegato per visualizzare correttamente tutto, quando ha fatto segnati il tempo e apri un terminale, scrivi

Codice: Seleziona tutto

dmesg
e incolla qui il risultato e  il tempo cronometrato, così vediamo se il caricamento si ferma e soprattutto dove e quando!

Saluti
Sparazza
ronny84
Prode Principiante
Messaggi: 10
Iscrizione: venerdì 20 giugno 2008, 22:15

Re: Problema avvio: pannelli gnome

Messaggio da ronny84 »

Appena sono a casa faccio la prova cronometro come da te suggerito!  ;D Per curiosità, cosa fa il comando che mi hai detto di scrivere?

Per la questione 32 e 64bit se devo essere sincero sono molto influenzato dall'ambiente windows dove i sistemi a 64bit non si usano ancora perchè poco supportati.. su linux la situazione è diversa e posso tranquillamente montare un sistema 64bit senza problemi di compatibilità con il software?  ???

Grazie ancora!
Avatar utente
sparazza
Entusiasta Emergente
Entusiasta Emergente
Messaggi: 1117
Iscrizione: giovedì 8 febbraio 2007, 14:47
Distribuzione: Ubuntu Precise
Contatti:

Re: Problema avvio: pannelli gnome

Messaggio da sparazza »

la maggior parte del software ubuntu-linux è supportato da 32 a 64 bit, soprattutto da quando in commercio sono venduti più processori a 64 bit ce a 32, Windows ancora non si adatta xkè già ha problemi di suo con i 32 bit.. per il resto il comando

Codice: Seleziona tutto

dmesg
mostra il log di avvio del sistema con tutti i maggiori avvenimenti ed a fianco il tempo dal boot.. esempio:

questo è quello che succede dal secondo 64 al secondo 71 circa sul mio computer all'avvio

Codice: Seleziona tutto

[   64.880300] p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available
[   65.026209] Adding 530104k swap on /dev/sda6.  Priority:-1 extents:1 across:530104k
[   65.578793] EXT3 FS on sda5, internal journal
[   65.709013] device-mapper: uevent: version 1.0.3
[   65.709045] device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com
[   67.272317] ip_tables: (C) 2000-2006 Netfilter Core Team
[   67.602402] PPP generic driver version 2.4.2
[   67.622495] NET: Registered protocol family 17
[   67.701866] NET: Registered protocol family 10
[   67.702118] lo: Disabled Privacy Extensions
[   67.703392] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   69.360864] No dock devices found.
[   69.918158] b44: eth0: Link is up at 100 Mbps, full duplex.
[   69.918164] b44: eth0: Flow control is off for TX and off for RX.
[   69.919554] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   70.467767] ppdev: user-space parallel port driver
[   70.705978] audit(1214475999.344:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=6116 profile="/usr/sbin/cupsd" namespace="default"
[   70.782190] apm: BIOS not found.
[   71.122519] RPC: Registered udp transport module.
[   71.122527] RPC: Registered tcp transport module.
[   71.219560] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   71.291759] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[   71.310603] NFSD: starting 90-second grace period
(non so cosa succeda in particolare, ma riconosco
Adding 530104k swap on /dev/sda6
b44: eth0: Link is up at 100 Mbps, full duplex.
e poco altro

comunque così puoi monitorare se in qualche secondo preciso il sistema si ferma su qualche operazione e magari correggere la situazione!

è bello vedere qualcuno che si interessa a "cosa c'è dietro?" !  :D

Saluti
Sparazza
ronny84
Prode Principiante
Messaggi: 10
Iscrizione: venerdì 20 giugno 2008, 22:15

Re: Problema avvio: pannelli gnome

Messaggio da ronny84 »

Ah grande proprio quello che ci serve! Infatti ieri mi chiedevo se ci fosse un modo per vedere cosa succede all'avvio per trovare ciò che inchioda il pc!  ;)

Inoltre ho scaricato (sfruttando la rete del poli che oggi è in vena e va a 450kb/s!) la versione 64bit.. se come dici tu il 64bit è ben supportato finalmente posso cambiare architettura visto che come dici giustamente tu su windows già la 32 ha problemi..  :D
ronny84
Prode Principiante
Messaggi: 10
Iscrizione: venerdì 20 giugno 2008, 22:15

Re: Problema avvio: pannelli gnome

Messaggio da ronny84 »

Ecco fatto preso i tempi di avvio... non ho pensato di chiederti quando dare l'avvio al cronometro, ossia quando inizia la registrazione del log!  ;D Io sono partito da grub prendendo i parziali significativi anche se non vedo una grande corrispondenza con il log.. magari rifaccio nel caso! ;)

Codice: Seleziona tutto

Grub – login: 00:49.6
login – prima barra: 00:20.0
prima barra – seconda barra: 00:42.1
seconda barra – uso: 1:02.

totale: 2:54.4

Codice: Seleziona tutto

[   21.644910] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]

[   21.645052] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]

[   21.645194] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]

[   21.645345] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]

[   21.652810] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)

[   21.652946] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12)

[   21.653079] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)

[   21.653211] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)

[   21.653344] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.

[   21.653477] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 *10 11 12)

[   21.653609] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 *11 12)

[   21.653744] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12)

[   21.653915] Linux Plug and Play Support v0.97 (c) Adam Belay

[   21.653943] pnp: PnP ACPI init

[   21.653950] ACPI: bus type pnp registered

[   21.676718] pnp: PnP ACPI: found 10 devices

[   21.676721] ACPI: ACPI bus type pnp unregistered

[   21.676723] PnPBIOS: Disabled by ACPI PNP

[   21.676915] PCI: Using ACPI for IRQ routing

[   21.676918] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report

[   21.696425] NET: Registered protocol family 8

[   21.696427] NET: Registered protocol family 20

[   21.696459] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0

[   21.696463] hpet0: 3 64-bit timers, 14318180 Hz

[   21.697496] AppArmor: AppArmor Filesystem Enabled

[   21.700306] Time: tsc clocksource has been installed.

[   21.700322] Switched to high resolution mode on CPU 0

[   21.700414] Switched to high resolution mode on CPU 1

[   21.713291] system 00:01: ioport range 0x164e-0x164f has been reserved

[   21.713294] system 00:01: ioport range 0x600-0x60f has been reserved

[   21.713296] system 00:01: ioport range 0x610-0x610 has been reserved

[   21.713299] system 00:01: ioport range 0x800-0x80f has been reserved

[   21.713301] system 00:01: ioport range 0x810-0x817 has been reserved

[   21.713303] system 00:01: ioport range 0x400-0x47f has been reserved

[   21.713306] system 00:01: ioport range 0x500-0x53f has been reserved

[   21.713309] system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved

[   21.713311] system 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved

[   21.713314] system 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved

[   21.713317] system 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved

[   21.713319] system 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved

[   21.713322] system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved

[   21.713325] system 00:01: iomem range 0xfee00000-0xfee00fff could not be reserved

[   21.713327] system 00:01: iomem range 0x32000000-0x320000ff could not be reserved

[   21.743731] PCI: Failed to allocate mem resource #6:20000@90000000 for 0000:01:00.0

[   21.743733] PCI: Bridge: 0000:00:01.0

[   21.743735]   IO window: 5000-5fff

[   21.743739]   MEM window: 90000000-92ffffff

[   21.743742]   PREFETCH window: 80000000-8fffffff

[   21.743745] PCI: Bridge: 0000:00:1c.0

[   21.743750]   IO window: 4000-4fff

[   21.743762]   MEM window: 9a300000-9b2fffff

[   21.743771]   PREFETCH window: 93000000-93ffffff

[   21.743783] PCI: Bridge: 0000:00:1c.1

[   21.743788]   IO window: 3000-3fff

[   21.743800]   MEM window: 99300000-9a2fffff

[   21.743808]   PREFETCH window: 94000000-94ffffff

[   21.743821] PCI: Bridge: 0000:00:1c.2

[   21.743825]   IO window: 2000-2fff

[   21.743838]   MEM window: 98200000-992fffff

[   21.743846]   PREFETCH window: 95000000-95ffffff

[   21.743859] PCI: Bridge: 0000:00:1c.3

[   21.743863]   IO window: 1000-1fff

[   21.743873]   MEM window: 97100000-981fffff

[   21.743882]   PREFETCH window: 96000000-96ffffff

[   21.743895] PCI: Bridge: 0000:00:1e.0

[   21.743896]   IO window: disabled.

[   21.743908]   MEM window: 97000000-970fffff

[   21.743916]   PREFETCH window: disabled.

[   21.743939] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16

[   21.743944] PCI: Setting latency timer of device 0000:00:01.0 to 64

[   21.743994] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16

[   21.744004] PCI: Setting latency timer of device 0000:00:1c.0 to 64

[   21.744057] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17

[   21.744064] PCI: Setting latency timer of device 0000:00:1c.1 to 64

[   21.744119] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18

[   21.744127] PCI: Setting latency timer of device 0000:00:1c.2 to 64

[   21.744182] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19

[   21.744190] PCI: Setting latency timer of device 0000:00:1c.3 to 64

[   21.744221] PCI: Setting latency timer of device 0000:00:1e.0 to 64

[   21.744233] NET: Registered protocol family 2

[   21.781275] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)

[   21.781474] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)

[   21.781866] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)

[   21.782058] TCP: Hash tables configured (established 131072 bind 65536)

[   21.782060] TCP reno registered

[   21.793331] checking if image is initramfs... it is

[   22.183824] APIC error on CPU0: 00(40)

[   22.418691] Freeing initrd memory: 7298k freed

[   22.419400] audit: initializing netlink socket (disabled)

[   22.419413] audit(1214507438.396:1): initialized

[   22.419606] highmem bounce pool size: 64 pages

[   22.421418] VFS: Disk quotas dquot_6.5.1

[   22.421494] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)

[   22.421623] io scheduler noop registered

[   22.421625] io scheduler anticipatory registered

[   22.421627] io scheduler deadline registered

[   22.421636] io scheduler cfq registered (default)

[   22.422048] Boot video device is 0000:01:00.0

[   22.422155] PCI: Setting latency timer of device 0000:00:01.0 to 64

[   22.422192] assign_interrupt_mode Found MSI capability

[   22.422222] Allocate Port Service[0000:00:01.0:pcie00]

[   22.422256] Allocate Port Service[0000:00:01.0:pcie02]

[   22.422344] PCI: Setting latency timer of device 0000:00:1c.0 to 64

[   22.422479] assign_interrupt_mode Found MSI capability

[   22.422586] Allocate Port Service[0000:00:1c.0:pcie00]

[   22.422614] Allocate Port Service[0000:00:1c.0:pcie02]

[   22.422804] PCI: Setting latency timer of device 0000:00:1c.1 to 64

[   22.422945] assign_interrupt_mode Found MSI capability

[   22.423056] Allocate Port Service[0000:00:1c.1:pcie00]

[   22.423089] Allocate Port Service[0000:00:1c.1:pcie02]

[   22.423281] PCI: Setting latency timer of device 0000:00:1c.2 to 64

[   22.423424] assign_interrupt_mode Found MSI capability

[   22.423535] Allocate Port Service[0000:00:1c.2:pcie00]

[   22.423565] Allocate Port Service[0000:00:1c.2:pcie02]

[   22.423760] PCI: Setting latency timer of device 0000:00:1c.3 to 64

[   22.423907] assign_interrupt_mode Found MSI capability

[   22.424016] Allocate Port Service[0000:00:1c.3:pcie00]

[   22.424045] Allocate Port Service[0000:00:1c.3:pcie02]

[   22.424367] isapnp: Scanning for PnP cards...

[   22.781978] isapnp: No Plug & Play device found

[   22.804842] Real Time Clock Driver v1.12ac

[   22.805034] hpet_resources: 0xfed00000 is busy

[   22.805091] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled

[   22.806212] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize

[   22.806271] input: Macintosh mouse button emulation as /devices/virtual/input/input0

[   22.806362] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12

[   22.842932] serio: i8042 KBD port at 0x60,0x64 irq 1

[   22.842937] serio: i8042 AUX port at 0x60,0x64 irq 12

[   22.860670] mice: PS/2 mouse device common for all mice

[   22.860772] EISA: Probing bus 0 at eisa.0

[   22.860780] Cannot allocate resource for EISA slot 1

[   22.860782] Cannot allocate resource for EISA slot 2

[   22.860784] Cannot allocate resource for EISA slot 3

[   22.860786] Cannot allocate resource for EISA slot 4

[   22.860788] Cannot allocate resource for EISA slot 5

[   22.860790] Cannot allocate resource for EISA slot 6

[   22.860805] EISA: Detected 0 cards.

[   22.860807] cpuidle: using governor ladder

[   22.860809] cpuidle: using governor menu

[   22.860883] NET: Registered protocol family 1

[   22.860908] Using IPI No-Shortcut mode

[   22.860932] registered taskstats version 1

[   22.861042]   Magic number: 12:585:193

[   22.861060]   hash matches device ttys5

[   22.861107]   hash matches device device:1f

[   22.861114] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found

[   22.861116] EDD information not available.

[   22.861289] Freeing unused kernel memory: 368k freed

[   22.880834] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1

[   22.955035] vesafb: framebuffer at 0x91000000, mapped to 0xf8880000, using 1536k, total 14336k

[   22.955039] vesafb: mode is 1024x768x8, linelength=1024, pages=3

[   22.955041] vesafb: protected mode interface info at c000:b900

[   22.955043] vesafb: pmi: set display start = c00cb963, set palette = c00cb9be

[   22.955044] vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da 

[   22.955054] vesafb: scrolling: redraw

[   22.955056] vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0

[   22.955155] Console: switching to colour frame buffer device 128x48

[   22.967859] fb0: VESA VGA frame buffer device

[   24.092568] fuse init (API version 7.9)

[   24.111186] ACPI: SSDT 7FE88C90, 022C (r1  PmRef  Cpu0Ist     3000 INTL 20051117)

[   24.111439] ACPI: SSDT 7FE87610, 05D7 (r1  PmRef  Cpu0Cst     3001 INTL 20051117)

[   24.113149] Monitor-Mwait will be used to enter C-1 state

[   24.113152] Monitor-Mwait will be used to enter C-2 state

[   24.113154] Monitor-Mwait will be used to enter C-3 state

[   24.113272] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])

[   24.113277] ACPI: Processor [CPU0] (supports 8 throttling states)

[   24.113498] ACPI: SSDT 7FE88F10, 00C4 (r1  PmRef  Cpu1Ist     3000 INTL 20051117)

[   24.113735] ACPI: SSDT 7FE8AD10, 0083 (r1  PmRef  Cpu1Cst     3000 INTL 20051117)

[   24.114593] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])

[   24.114599] ACPI: Processor [CPU1] (supports 8 throttling states)

[   24.117881] ACPI: Thermal Zone [TZ01] (55 C)

[   24.248784] usbcore: registered new interface driver usbfs

[   24.248806] usbcore: registered new interface driver hub

[   24.248831] usbcore: registered new device driver usb

[   24.250165] USB Universal Host Controller Interface driver v3.0

[   24.250211] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16

[   24.250227] PCI: Setting latency timer of device 0000:00:1a.0 to 64

[   24.250233] uhci_hcd 0000:00:1a.0: UHCI Host Controller

[   24.250437] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1

[   24.250484] uhci_hcd 0000:00:1a.0: irq 16, io base 0x000060c0

[   24.250605] usb usb1: configuration #1 chosen from 1 choice

[   24.250626] hub 1-0:1.0: USB hub found

[   24.250631] hub 1-0:1.0: 2 ports detected

[   24.350834] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 20

[   24.350850] PCI: Setting latency timer of device 0000:00:1a.1 to 64

[   24.350856] uhci_hcd 0000:00:1a.1: UHCI Host Controller

[   24.350879] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2

[   24.350923] uhci_hcd 0000:00:1a.1: irq 20, io base 0x000060a0

[   24.351032] usb usb2: configuration #1 chosen from 1 choice

[   24.351053] hub 2-0:1.0: USB hub found

[   24.351058] hub 2-0:1.0: 2 ports detected

[   24.370523] APIC error on CPU0: 40(40)

[   24.454799] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 21

[   24.454817] PCI: Setting latency timer of device 0000:00:1d.0 to 64

[   24.454823] uhci_hcd 0000:00:1d.0: UHCI Host Controller

[   24.454845] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3

[   24.454889] uhci_hcd 0000:00:1d.0: irq 21, io base 0x00006080

[   24.455000] usb usb3: configuration #1 chosen from 1 choice

[   24.455022] hub 3-0:1.0: USB hub found

[   24.455027] hub 3-0:1.0: 2 ports detected

[   24.558716] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19

[   24.558732] PCI: Setting latency timer of device 0000:00:1d.1 to 64

[   24.558739] uhci_hcd 0000:00:1d.1: UHCI Host Controller

[   24.558760] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4

[   24.558805] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00006060

[   24.558916] usb usb4: configuration #1 chosen from 1 choice

[   24.558938] hub 4-0:1.0: USB hub found

[   24.558943] hub 4-0:1.0: 2 ports detected

[   24.566315] SCSI subsystem initialized

[   24.608178] libata version 3.00 loaded.

[   24.662657] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18

[   24.662674] PCI: Setting latency timer of device 0000:00:1d.2 to 64

[   24.662680] uhci_hcd 0000:00:1d.2: UHCI Host Controller

[   24.662702] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5

[   24.662747] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00006040

[   24.662868] usb usb5: configuration #1 chosen from 1 choice

[   24.662890] hub 5-0:1.0: USB hub found

[   24.662894] hub 5-0:1.0: 2 ports detected

[   24.766735] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18

[   24.766748] PCI: Setting latency timer of device 0000:00:1a.7 to 64

[   24.766753] ehci_hcd 0000:00:1a.7: EHCI Host Controller

[   24.766779] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6

[   24.770699] ehci_hcd 0000:00:1a.7: debug port 1

[   24.770713] PCI: cache line size of 32 is not supported by device 0000:00:1a.7

[   24.770718] ehci_hcd 0000:00:1a.7: irq 18, io mem 0x9b304c00

[   24.786508] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004

[   24.786611] usb usb6: configuration #1 chosen from 1 choice

[   24.786633] hub 6-0:1.0: USB hub found

[   24.786638] hub 6-0:1.0: 4 ports detected

[   24.890631] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 21

[   24.890648] PCI: Setting latency timer of device 0000:00:1d.7 to 64

[   24.890652] ehci_hcd 0000:00:1d.7: EHCI Host Controller

[   24.890675] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7

[   24.894595] ehci_hcd 0000:00:1d.7: debug port 1

[   24.894608] PCI: cache line size of 32 is not supported by device 0000:00:1d.7

[   24.894614] ehci_hcd 0000:00:1d.7: irq 21, io mem 0x9b304800

[   24.903435] usb 4-2: new full speed USB device using uhci_hcd and address 2

[   24.914429] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004

[   24.914542] usb usb7: configuration #1 chosen from 1 choice

[   24.914564] hub 7-0:1.0: USB hub found

[   24.914568] hub 7-0:1.0: 6 ports detected

[   25.018549] tg3.c:v3.86 (November 9, 2007)

[   25.018635] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> IRQ 18

[   25.018653] PCI: Setting latency timer of device 0000:05:00.0 to 64

[   25.062137] eth0: Tigon3 [partno(BCM95787m) rev b002 PHY(5787)] (PCI Express) 10/100/1000Base-T Ethernet 00:1b:38:64:66:5a

[   25.062143] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]

[   25.062146] eth0: dma_rwctrl[76180000] dma_mask[64-bit]

[   25.062204] ACPI: PCI Interrupt 0000:07:00.0[A] -> GSI 20 (level, low) -> IRQ 22

[   25.062215] PCI: Setting latency timer of device 0000:07:00.0 to 64

[   25.114996] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[22]  MMIO=[97000000-970007ff]  Max Packet=[2048]  IR/IT contexts=[4/4]

[   25.119099] ata_piix 0000:00:1f.1: version 2.12

[   25.119120] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18

[   25.119165] PCI: Setting latency timer of device 0000:00:1f.1 to 64

[   25.119485] scsi0 : ata_piix

[   25.119528] scsi1 : ata_piix

[   25.120061] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x60e0 irq 14

[   25.120063] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x60e8 irq 15

[   25.138705] APIC error on CPU0: 40(40)

[   25.266246] usb 7-4: new high speed USB device using ehci_hcd and address 2

[   25.439595] ata1.00: ATAPI: HL-DT-ST DVDRAM GSA-T20N, WP03, max UDMA/33

[   25.518070] Clocksource tsc unstable (delta = -2099530277 ns)

[   25.527225] Time: hpet clocksource has been installed.

[   25.603929] ata1.00: configured for UDMA/33

[   25.685923] usb 7-4: configuration #1 chosen from 1 choice

[   25.774958] scsi 0:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-T20N  WP03 PQ: 0 ANSI: 5

[   25.775069] ahci 0000:00:1f.2: version 3.0

[   25.775113] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19

[   25.775198] ahci 0000:00:1f.2: nr_ports (3) and implemented port map (0x3) don't match, using nr_ports

[   25.775201] ahci 0000:00:1f.2: forcing PORTS_IMPL to 0x7

[   25.885954] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[b64068c100023f7a]

[   25.921690] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode

[   25.921695] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part 

[   25.921707] PCI: Setting latency timer of device 0000:00:1f.2 to 64

[   25.921985] scsi2 : ahci

[   25.922161] scsi3 : ahci

[   25.922313] scsi4 : ahci

[   25.922407] ata3: SATA max UDMA/133 abar m2048@0x9b304000 port 0x9b304100 irq 218

[   25.922413] ata4: SATA max UDMA/133 abar m2048@0x9b304000 port 0x9b304180 irq 218

[   25.922418] ata5: SATA max UDMA/133 abar m2048@0x9b304000 port 0x9b304200 irq 218

[   25.994408] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)

[   25.995411] ata3.00: ATA-8: Hitachi HTS542516K9SA00, BBCOC31P, max UDMA/133

[   25.995416] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)

[   25.996662] ata3.00: configured for UDMA/133

[   26.018830] ata4: SATA link down (SStatus 0 SControl 300)

[   26.044429] ata5: SATA link down (SStatus 0 SControl 0)

[   26.044672] scsi 2:0:0:0: Direct-Access     ATA      Hitachi HTS54251 BBCO PQ: 0 ANSI: 5

[   26.056699] Driver 'sd' needs updating - please use bus_type methods

[   26.059134] Driver 'sr' needs updating - please use bus_type methods

[   26.062245] sd 2:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)

[   26.062294] sd 2:0:0:0: [sda] Write Protect is off

[   26.062299] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00

[   26.062328] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[   26.062396] sd 2:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)

[   26.062419] sd 2:0:0:0: [sda] Write Protect is off

[   26.062421] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00

[   26.062478] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[   26.062481]  sda:sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray

[   26.074891] Uniform CD-ROM driver Revision: 3.20

[   26.074952] sr 0:0:0:0: Attached scsi CD-ROM sr0

[   26.434113]  sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >

[   26.480457] sd 2:0:0:0: [sda] Attached SCSI disk

[   26.485073] sr 0:0:0:0: Attached scsi generic sg0 type 5

[   26.485091] sd 2:0:0:0: Attached scsi generic sg1 type 0

[   26.885999] Attempting manual resume

[   26.886002] swsusp: Resume From Partition 8:7

[   26.886003] PM: Checking swsusp image.

[   26.886227] PM: Resume from disk failed.

[   26.919778] kjournald starting.  Commit interval 5 seconds

[   26.919812] EXT3-fs: mounted filesystem with ordered data mode.

[   36.280862] pci_hotplug: PCI Hot Plug PCI Core version: 0.5

[   36.306082] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4

[   36.406990] APIC error on CPU0: 40(40)

[   36.428804] input: PC Speaker as /devices/platform/pcspkr/input/input2

[   36.484560] Linux agpgart interface v0.102

[   36.588634] iTCO_vendor_support: vendor-support=0

[   36.652705] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)

[   36.664638] input: PS/2 Mouse as /devices/virtual/input/input3

[   36.674229] ACPI: WMI-Acer: Mapper loaded

[   36.748107] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input4

[   36.789849] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x0460)

[   36.789895] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)

[   36.996565] input: Power Button (FF) as /devices/virtual/input/input5

[   37.052533] ACPI: Power Button (FF) [PWRF]

[   37.052603] input: Power Button (CM) as /devices/virtual/input/input6

[   37.112334] ACPI: Power Button (CM) [PWRB]

[   37.112393] input: Lid Switch as /devices/virtual/input/input7

[   37.112475] acer_acpi: Acer Laptop ACPI Extras version 0.11.1

[   37.112480] acer_acpi: Detected Acer WMID interface

[   37.128382] ACPI: Lid Switch [LID0]

[   37.128434] input: Sleep Button (CM) as /devices/virtual/input/input8

[   37.192291] ACPI: Sleep Button (CM) [SLPB]

[   37.284258] ACPI: AC Adapter [AC] (off-line)

[   37.548160] sdhci: Secure Digital Host Controller Interface driver

[   37.548164] sdhci: Copyright(c) Pierre Ossman

[   37.548205] sdhci: SDHCI controller found at 0000:07:00.1 [1180:0822] (rev 22)

[   37.548245] ACPI: PCI Interrupt 0000:07:00.1[B] -> GSI 22 (level, low) -> IRQ 23

[   37.548267] sdhci:slot0: Will use DMA mode even though HW doesn't fully claim to support it.

[   37.548277] PCI: Setting latency timer of device 0000:07:00.1 to 64

[   37.548327] mmc0: SDHCI at 0x97000a00 irq 23 DMA

[   37.654080] nvidia: module license 'NVIDIA' taints kernel.

[   37.931062] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.0

[   37.931066] iwl3945: Copyright(c) 2003-2007 Intel Corporation

[   37.931201] ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 19 (level, low) -> IRQ 19

[   37.931216] PCI: Setting latency timer of device 0000:06:00.0 to 64

[   37.931239] iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection

[   37.944580] Linux video capture interface: v2.00

[   37.988975] uvcvideo: Found UVC 1.00 device Acer Crystal Eye webcam  (5986:0102)

[   38.015864] ACPI: Battery Slot [BAT0] (battery present)

[   38.123769] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:34/LNXVIDEO:00/input/input9

[   38.155750] usbcore: registered new interface driver uvcvideo

[   38.155755] USB Video Class driver (v0.1.0)

[   38.186717] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)

[   38.290886] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input10

[   38.322640] ACPI: Video Device [OVGA] (multi-head: yes  rom: no  post: no)

[   38.787183] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16

[   38.787199] PCI: Setting latency timer of device 0000:01:00.0 to 64

[   38.787296] NVRM: loading NVIDIA UNIX x86 Kernel Module  169.12  Thu Feb 14 17:53:07 PST 2008

[   38.835590] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 23

[   38.835621] PCI: Setting latency timer of device 0000:00:1b.0 to 64

[   38.873069] hda_codec: Unknown model for ALC268, trying auto-probe from BIOS...

[   38.892652] iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels

[   38.893027] wmaster0: Selected rate control algorithm 'iwl-3945-rs'

[   39.097678] lp: driver loaded but no devices found

[   39.185108] vboxdrv: Trying to deactivate the NMI watchdog permanently...

[   39.185112] vboxdrv: Successfully done.

[   39.185114] vboxdrv: Found 2 processor cores.

[   39.185127] vboxdrv: fAsync=0 u64DiffCores=1548.

[   39.185166] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.

[   39.185168] vboxdrv: Successfully loaded version 1.6.2 (interface 0x00070002).

[   39.234729] Adding 979924k swap on /dev/sda7.  Priority:-1 extents:1 across:979924k

[   39.253656] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended

[   39.290418] APIC error on CPU0: 40(40)

[   39.316448] EXT3 FS on sda5, internal journal

[   39.578146] kjournald starting.  Commit interval 5 seconds

[   39.578425] EXT3 FS on sda6, internal journal

[   39.578430] EXT3-fs: mounted filesystem with ordered data mode.

[   40.598729] ip_tables: (C) 2000-2006 Netfilter Core Team

[   41.052693] No dock devices found.

[   41.737225] apm: BIOS not found.

[   41.898723] ppdev: user-space parallel port driver

[   41.975007] audit(1214500262.244:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5370 profile="/usr/sbin/cupsd" namespace="default"

[   43.378839] Bluetooth: Core ver 2.11

[   43.379166] NET: Registered protocol family 31

[   43.379168] Bluetooth: HCI device and connection manager initialized

[   43.379171] Bluetooth: HCI socket layer initialized

[   43.399505] Bluetooth: L2CAP ver 2.9

[   43.399510] Bluetooth: L2CAP socket layer initialized

[   43.500078] Bluetooth: RFCOMM socket layer initialized

[   43.500090] Bluetooth: RFCOMM TTY layer initialized

[   43.500092] Bluetooth: RFCOMM ver 1.8

[   43.759015] NET: Registered protocol family 17

[   44.376434] tg3: eth0: Link is up at 10 Mbps, half duplex.

[   44.376443] tg3: eth0: Flow control is off for TX and off for RX.

[   48.692475] NET: Registered protocol family 10

[   48.692966] lo: Disabled Privacy Extensions

[   48.694801] ADDRCONF(NETDEV_UP): wlan0: link is not ready

[   52.093411] eth0: no IPv6 routers present

[   61.672061] CPU0 attaching NULL sched-domain.

[   61.672068] CPU1 attaching NULL sched-domain.

[   61.685499] CPU0 attaching sched-domain:

[   61.685503]  domain 0: span 03

[   61.685506]   groups: 01 02

[   61.685509]   domain 1: span 03

[   61.685511]    groups: 03

[   61.685514] CPU1 attaching sched-domain:

[   61.685516]  domain 0: span 03

[   61.685517]   groups: 02 01

[   61.685520]   domain 1: span 03

[   61.685522]    groups: 03

[   66.146623] APIC error on CPU0: 40(40)

[   75.467964] APIC error on CPU0: 40(40)

[   78.075002] APIC error on CPU0: 40(40)

[   84.017102] APIC error on CPU0: 40(40)

[   85.990896] APIC error on CPU0: 40(40)

[   87.198734] APIC error on CPU0: 40(40)

[   87.655129] APIC error on CPU0: 40(40)

Tra l'altro non mi monta più in automatico le due partizioni ntfs come avevo impostato e, ancora più grave, non me le fa più montare neanche a mano! dice che devo essere root (sempre montate così direttamente senza aprire il terminale)..  ???

Leggiucchiando velocemente il log la voce che più mi salta all'occhio è questo APIC error on CPU0: 40(40) anche se è stranamente alla fine.. per il resto bhoo, ammetto davvero la mia ignoranza in materia!

Intanto masterizzo la 64bit va là che almeno se proprio devo formattare ancora lo faccio a cuor più leggero..  :D


EDIT: ah se può servire oggi sono arrivato in uni e si è avviato stranissimamente perfetto e anche adesso arrivato a casa ha fatto 2 riavvii normali (non ho notato però per le partizioni).. poi ho notato che c'erano i driver video disattivati e li ho riattivati, ha fatto un paio di riavvii tranquilli (gioivo ma con riserva!) e poi ancora errore..
Ultima modifica di ronny84 il giovedì 26 giugno 2008, 19:46, modificato 1 volta in totale.
Avatar utente
sparazza
Entusiasta Emergente
Entusiasta Emergente
Messaggi: 1117
Iscrizione: giovedì 8 febbraio 2007, 14:47
Distribuzione: Ubuntu Precise
Contatti:

Re: Problema avvio: pannelli gnome

Messaggio da sparazza »

perfetto hai identificato il problema tutto da solo: APIC (http://it.wikipedia.org/wiki/Architettura_APIC_della_Intel)
Dovrebbe essere qualcosa che c'entra con l'architettura del pc.. non sono un esperto in materia ma indagando ho trovato http://www.hwupgrade.it/forum/showthread.php?p=22851518 e per sicurezza prova

Codice: Seleziona tutto

cat /var/log/kern.log | grep error
confrontando i risultati con l'ora dell'avvio del pc..

guarda anche qui

Codice: Seleziona tutto

http://forum.ubuntu-it.org/viewtopic.php?t=153861msg1089296
per il resto a volte la versione 64 bit risolve di questi problemi ma la soluzione ufficiale, cercando in giro, è l'aggiornamento del bios(delicata) mentre il rattoppo ufficiale è l'inserimento di comandi nel boot... decidi tu cosa fare  ;D

Saluti
Sparazza
ronny84
Prode Principiante
Messaggi: 10
Iscrizione: venerdì 20 giugno 2008, 22:15

Re: Problema avvio: pannelli gnome

Messaggio da ronny84 »

Grazie ancora per la risposta, davvero gentilissimo!  :)

Nel weekend ho intallato la 64bit come da te consigliato e per ora tutto liscio come l'olio. Tra l'altro sto personalizzando il sistema un passo alla volta in modo da "inchiodare", nel caso, il colpevole!  :D

Tra l'altro se mi confermi che il problema risiede nella gestione dei due processori, mi sorge il dubbio che il problema risieda in 1 ottimizzazione che ho fatto proprio per il multiprocessore consigliata in questa.. ammetto di aver agito un po' alla cieca ed essermi fidato..  :-[ Tra l'altro mi ero anche dimenticato di questa ottimizzazione se no te l'avrei segnalato in precedenza!

Ti ringrazio davvero molto ancora per i link e i suggerimenti, nel caso si ripresentasse in problema (tocchiamoci  ;D) ne farò sicuramente uso! Sperando di non dover aggiornare veramente il bios che mi fa un po' paura come cosa (anche se a quanto ne so ormai tutte le schede madri hanno un modo per eseguire un ripristino)!
Ultima modifica di ronny84 il lunedì 30 giugno 2008, 0:42, modificato 1 volta in totale.
Avatar utente
sparazza
Entusiasta Emergente
Entusiasta Emergente
Messaggi: 1117
Iscrizione: giovedì 8 febbraio 2007, 14:47
Distribuzione: Ubuntu Precise
Contatti:

Re: Problema avvio: pannelli gnome

Messaggio da sparazza »

Non ti preoccupare, mmm davvero bella guida! certo che ne hanno scritta di roba! comunque sono contento tu abbia risolto! metti [RISOLTO] nel titolo del topic così da aiutare gente che verrà dopo di te!

Buona personalizzazione! ;D

Saluti
Sparazza

ps: se ce la fai dimmi qual'è l'ottimizzazione che hai fatto seguendo la guida( non ce la faccio a scorrerla tutta!), così magari sveliamo l'arcano.
ronny84
Prode Principiante
Messaggi: 10
Iscrizione: venerdì 20 giugno 2008, 22:15

Re: Problema avvio: pannelli gnome

Messaggio da ronny84 »

Certo! Allora a pagina 31 del pdf le 3 ottimizzazioni che ci sono ossia:

I - Preload
II - Gestione dello swap
III - Sfruttare l’hyperthreading dei processori dual-core

mentre a pagina 36:

b - Abilitare il risparmio energetico

Poi ho seguito molti altri spunti dalla guida come l'installazione dei codec ma quelli più critici mi sembrano essere questi 4!  ;)
Scrivi risposta

Ritorna a “Applicazioni”

Chi c’è in linea

Visualizzano questa sezione: 0 utenti iscritti e 7 ospiti