RISOLTO!!!! domanda sul pacchetto linux-restricted-modules

[loolee]

vorrei qualche chiarimento sul pacchetto linux-restricted-extras, dato che non ho trovato molta documentazione in giro.
So, bene o male, a che serve ma dove posso trovare qualche nozione in più??

è possibile che i problemi di wireless (driver abititato ma non in uso) dipendano da essi??


se ho installato questo pacchetto è necessario avere anche ubuntu-restricted-extras? potrebbero andare in conflitto?

tnx in anticipo  (b2b)

[Guiodic]

linux-restricted-extras non esiste

[loolee]

linux-restricted-extras non esiste

sorry
linux-restricted modules

mi sono incartata  :-[

[StanAdams]

Diciamo che linux-restricted modules sono i pacchetti del kernel.

[loolee]

eh ma così non mi dite niente!!!

che differenza c'è tra
linux restricted modules
linux image
linux ubuntu modules
linux headers
linux backports modules

devo sapere!!!    devo risolvere un casino
almeno ditemi dove posso vedere, plis 

[Guiodic]

quando selezioni il pacchetto in synaptic esce la descrizione...

[loolee]

quando selezioni il pacchetto in synaptic esce la descrizione...

si ma non è che spieghi molto.
se uno volesse saperne di più?
ma che avete stasera??? niente voglia di aiutare??

uffi...

[Guiodic]

linux restricted modules: moduli proprietari, tra cui nvidia e ati
linux image: immagine del kernel
linux ubuntu modules: moduli del kernel
linux headers: intestazioni del kernel, necessarie per compilare moduli aggiuntivi
linux backports modules: correzioni di moduli già forniti di default

devo sapere!!!    devo risolvere un casino
almeno ditemi dove posso vedere, plis 

Se spieghi suddetto casino....

[loolee]

grazie Guido, il casino l'ho spiegato in un altro post, ma riassumendo, mi è sparita la wireless da un notebook HP 6720s con scheda broadcom 4310. Prima funzionava e poi POUF!!! sparita.
forse ho aggiornato qualcosa? di sicuro.
fatto sta che tra i driver con restrizioni mi trova il driver ed è abilitato, ma non in uso.

che fare? secondo me c'è casino con il kernel, ma non so da dove cominciare e non ho trovato niete che possa aiutarmi, e dire che di "howTo" ne ho provati parecchio... per questo volevo capirci un pò di più di kernel, per capire dove mettere le mani

[Guiodic]

magari il firmware?

[loolee]

magari il firmware?

e che devo fare? devo riscaricarlo? non ho mai avuto problemi con la wireless, quindi non ho idea di dovere mettere le mani

[Guiodic]

http://wiki.ubuntu-it.org/Hardware/Disp ... i/Broadcom

[loolee]

fatto tutto.
provato e riprovato.
non funziona.

e comunque, in questa guida c'è scritto che A partire dalla release di Ubuntu 8.04 «Hardy Heron» sono presenti nel kernel i nuovi driver per schede wireless Broadcom, denominati b43 e b43legacy. Tali driver sostituiscono completamente i bcm43xx, che diventano quindi obsoleti e sconsigliati.

quindi, considerando che ho hardy, non avrei bisogno di fare nulla , no? a maggior ragione se il driver  è abilitato ma non in uso.
ma perchè  c##@o non si abilita 'sto driver???

[Cobra78]

Azz, detto una cavolata, scusate

Senti, prova a dare nel terminale un dmesg e vedere se dice qualcosa sulla broadcom.

[loolee]

Codice: Seleziona tutto

[   12.579041] Memory: 1012852k/1040064k available (2489k kernel code, 26824k reserved, 1318k data, 320k init)
[   12.579092] SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[   12.656069] Calibrating delay using timer specific routine.. 3994.45 BogoMIPS (lpj=7988914)
[   12.656109] Security Framework initialized
[   12.656118] SELinux:  Disabled at boot.
[   12.656131] AppArmor: AppArmor initialized
[   12.656136] Failure registering capabilities with primary security module.
[   12.656252] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[   12.657008] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[   12.657388] Mount-cache hash table entries: 256
[   12.657549] Initializing cgroup subsys ns
[   12.657555] Initializing cgroup subsys cpuacct
[   12.657571] CPU: L1 I cache: 32K, L1 D cache: 32K
[   12.657572] CPU: L2 cache: 1024K
[   12.657575] CPU 0/0 -> Node 0
[   12.657576] using mwait in idle threads.
[   12.657584] CPU0: Thermal monitoring handled by SMI
[   12.657599] SMP alternatives: switching to UP code
[   12.658432] Early unpacking initramfs... done
[   13.006945] ACPI: Core revision 20070126
[   13.007033] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[   13.155204] Using local APIC timer interrupts.
[   13.205306] APIC timer calibration result 8312499
[   13.205307] Detected 8.312 MHz APIC timer.
[   13.205352] Brought up 1 CPUs
[   13.205417] CPU0 attaching sched-domain:
[   13.205419]  domain 0: span 01
[   13.205420]   groups: 01
[   13.205568] net_namespace: 120 bytes
[   13.205919] Time:  7:26:00  Date: 07/06/08
[   13.205947] NET: Registered protocol family 16
[   13.206121] ACPI: bus type pci registered
[   13.206188] PCI: Using configuration type 1
[   13.207409] ACPI: EC: Look up EC in DSDT
[   13.208741] ACPI: EC: non-query interrupt received, switching to interrupt mode
[   13.254379] ACPI: Interpreter enabled
[   13.254383] ACPI: (supports S0 S3 S4 S5)
[   13.254393] ACPI: Using IOAPIC for interrupt routing
[   13.263710] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
[   13.263713] ACPI: EC: driver started in interrupt mode
[   13.263769] ACPI: PCI Root Bridge [C003] (0000:00)
[   13.264813] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[   13.264817] PCI quirk: region 1100-113f claimed by ICH6 GPIO
[   13.265693] PCI: Transparent bridge - 0000:00:1e.0
[   13.265739] ACPI: PCI Interrupt Routing Table [\_SB_.C003._PRT]
[   13.266120] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C0B1._PRT]
[   13.266259] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C11E._PRT]
[   13.266394] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C132._PRT]
[   13.266528] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C135._PRT]
[   13.308212] ACPI: PCI Interrupt Link [C12E] (IRQs *10 11)
[   13.308424] ACPI: PCI Interrupt Link [C12F] (IRQs *10 11)
[   13.308632] ACPI: PCI Interrupt Link [C130] (IRQs 10 *11)
[   13.308834] ACPI: PCI Interrupt Link [C131] (IRQs 10 11) *0, disabled.
[   13.309041] ACPI: PCI Interrupt Link [C141] (IRQs *10 11)
[   13.309249] ACPI: PCI Interrupt Link [C142] (IRQs *10 11)
[   13.309462] ACPI: PCI Interrupt Link [C143] (IRQs 10 11) *5
[   13.309563] ACPI Exception (pci_link-0184): AE_NOT_FOUND, Evaluating _PRS [20070126]
[   13.309748] ACPI: Power Resource [C29B] (on)
[   13.309799] ACPI: Power Resource [C1C6] (off)
[   13.309906] ACPI: Power Resource [C3B2] (off)
[   13.310007] ACPI: Power Resource [C3B3] (off)
[   13.310106] ACPI: Power Resource [C3B4] (off)
[   13.310204] ACPI: Power Resource [C3B5] (off)
[   13.310302] ACPI: Power Resource [C3B6] (off)
[   13.310354] Linux Plug and Play Support v0.97 (c) Adam Belay
[   13.310383] pnp: PnP ACPI init
[   13.310390] ACPI: bus type pnp registered
[   13.318039] pnp: PnP ACPI: found 12 devices
[   13.318042] ACPI: ACPI bus type pnp unregistered
[   13.318255] PCI: Using ACPI for IRQ routing
[   13.318257] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[   13.329271] NET: Registered protocol family 8
[   13.329273] NET: Registered protocol family 20
[   13.329304] PCI-GART: No AMD northbridge found.
[   13.329311] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[   13.329313] hpet0: 3 64-bit timers, 14318180 Hz
[   13.330359] AppArmor: AppArmor Filesystem Enabled
[   13.333241] Time: tsc clocksource has been installed.
[   13.333254] Switched to high resolution mode on CPU 0
[   13.341233] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[   13.341236] system 00:00: iomem range 0xe0000-0xfffff could not be reserved
[   13.341238] system 00:00: iomem range 0x100000-0x3f7fffff could not be reserved
[   13.341247] system 00:09: ioport range 0x500-0x57f has been reserved
[   13.341249] system 00:09: ioport range 0x800-0x80f has been reserved
[   13.341253] system 00:09: iomem range 0xffb00000-0xffbfffff could not be reserved
[   13.341256] system 00:09: iomem range 0xfff00000-0xffffffff could not be reserved
[   13.341260] system 00:0a: ioport range 0x4d0-0x4d1 has been reserved
[   13.341263] system 00:0a: ioport range 0x1000-0x107f has been reserved
[   13.341265] system 00:0a: ioport range 0x1100-0x113f has been reserved
[   13.341268] system 00:0a: ioport range 0x1200-0x121f has been reserved
[   13.341271] system 00:0a: iomem range 0xf8000000-0xfbffffff has been reserved
[   13.341273] system 00:0a: iomem range 0xfec00000-0xfec000ff could not be reserved
[   13.341276] system 00:0a: iomem range 0xfed20000-0xfed3ffff could not be reserved
[   13.341279] system 00:0a: iomem range 0xfed45000-0xfed8ffff could not be reserved
[   13.341282] system 00:0a: iomem range 0xfed90000-0xfed99fff could not be reserved
[   13.341287] system 00:0b: iomem range 0xcee00-0xcffff has been reserved
[   13.341290] system 00:0b: iomem range 0xd2000-0xd3fff has been reserved
[   13.341292] system 00:0b: iomem range 0xfeda0000-0xfedbffff could not be reserved
[   13.341295] system 00:0b: iomem range 0xfee00000-0xfee00fff could not be reserved
[   13.341649] PCI: Bridge: 0000:00:1c.0
[   13.341650]   IO window: disabled.
[   13.341656]   MEM window: disabled.
[   13.341659]   PREFETCH window: disabled.
[   13.341665] PCI: Bridge: 0000:00:1c.1
[   13.341666]   IO window: disabled.
[   13.341672]   MEM window: e4000000-e40fffff
[   13.341676]   PREFETCH window: disabled.
[   13.341681] PCI: Bridge: 0000:00:1c.4
[   13.341684]   IO window: 2000-3fff
[   13.341690]   MEM window: e0000000-e3ffffff
[   13.341694]   PREFETCH window: disabled.
[   13.341699] PCI: Bridge: 0000:00:1e.0
[   13.341700]   IO window: disabled.
[   13.341706]   MEM window: disabled.
[   13.341709]   PREFETCH window: disabled.
[   13.341744] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
[   13.341751] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[   13.341775] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
[   13.341780] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[   13.341804] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16
[   13.341809] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[   13.341823] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[   13.341833] NET: Registered protocol family 2
[   13.377258] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
[   13.377625] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
[   13.379007] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[   13.379729] TCP: Hash tables configured (established 131072 bind 65536)
[   13.379734] TCP reno registered
[   13.389361] checking if image is initramfs... it is
[   14.066050] Freeing initrd memory: 7548k freed
[   14.072092] audit: initializing netlink socket (disabled)
[   14.072108] audit(1215329160.360:1): initialized
[   14.073869] VFS: Disk quotas dquot_6.5.1
[   14.073936] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[   14.074061] io scheduler noop registered
[   14.074063] io scheduler anticipatory registered
[   14.074065] io scheduler deadline registered
[   14.074157] io scheduler cfq registered (default)
[   14.074169] Boot video device is 0000:00:02.0
[   14.075003] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[   14.075063] assign_interrupt_mode Found MSI capability
[   14.075114] Allocate Port Service[0000:00:1c.0:pcie00]
[   14.075218] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[   14.075278] assign_interrupt_mode Found MSI capability
[   14.075325] Allocate Port Service[0000:00:1c.1:pcie00]
[   14.075351] Allocate Port Service[0000:00:1c.1:pcie02]
[   14.075449] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[   14.075509] assign_interrupt_mode Found MSI capability
[   14.075557] Allocate Port Service[0000:00:1c.4:pcie00]
[   14.075582] Allocate Port Service[0000:00:1c.4:pcie02]
[   14.097700] Real Time Clock Driver v1.12ac
[   14.097955] hpet_resources: 0xfed00000 is busy
[   14.098009] Linux agpgart interface v0.102
[   14.098012] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[   14.099003] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[   14.099067] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[   14.099148] PNP: PS/2 Controller [PNP0303:C298,PNP0f13:C299] at 0x60,0x64 irq 1,12
[   14.101022] i8042.c: Detected active multiplexing controller, rev 1.1.
[   14.101836] serio: i8042 KBD port at 0x60,0x64 irq 1
[   14.101840] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[   14.101842] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[   14.101844] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[   14.101846] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[   14.112820] mice: PS/2 mouse device common for all mice
[   14.112853] cpuidle: using governor ladder
[   14.112855] cpuidle: using governor menu
[   14.112997] NET: Registered protocol family 1
[   14.113092] registered taskstats version 1
[   14.113185]   Magic number: 0:570:419
[   14.113325] /build/buildd/linux-2.6.24/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[   14.113328] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[   14.113330] EDD information not available.
[   14.113338] Freeing unused kernel memory: 320k freed
[   14.140766] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[   15.291895] fuse init (API version 7.9)
[   15.304390] ACPI: Transitioning device [C3B7] to D3
[   15.304394] ACPI: Transitioning device [C3B7] to D3
[   15.304397] ACPI: Fan [C3B7] (off)
[   15.304589] ACPI: Transitioning device [C3B8] to D3
[   15.304591] ACPI: Transitioning device [C3B8] to D3
[   15.304593] ACPI: Fan [C3B8] (off)
[   15.304783] ACPI: Transitioning device [C3B9] to D3
[   15.304784] ACPI: Transitioning device [C3B9] to D3
[   15.304787] ACPI: Fan [C3B9] (off)
[   15.304975] ACPI: Transitioning device [C3BA] to D3
[   15.304977] ACPI: Transitioning device [C3BA] to D3
[   15.304980] ACPI: Fan [C3BA] (off)
[   15.305173] ACPI: Transitioning device [C3BB] to D3
[   15.305174] ACPI: Transitioning device [C3BB] to D3
[   15.305177] ACPI: Fan [C3BB] (off)
[   15.314203] Monitor-Mwait will be used to enter C-1 state
[   15.314207] Monitor-Mwait will be used to enter C-2 state
[   15.314308] ACPI: CPU0 (power states: C1[C1] C2[C2])
[   15.314312] ACPI: Processor [CPU0] (supports 8 throttling states)
[   15.314329] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
[   15.318602] ACPI: Thermal Zone [TZ3] (28 C)
[   15.318920] Marking TSC unstable due to TSC halts in idle
[   15.320022] Time: hpet clocksource has been installed.
[   15.320119] ACPI: Thermal Zone [TZ4] (29 C)
[   15.320516] ACPI: Thermal Zone [TZ5] (68 C)
[   15.325846] ACPI: Thermal Zone [TZ0] (34 C)
[   15.329541] ACPI: Thermal Zone [TZ1] (37 C)
[   15.890949] Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI
[   15.890952] Copyright (c) 1999-2006 Intel Corporation.
[   15.891013] ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 22 (level, low) -> IRQ 22
[   15.891026] PCI: Setting latency timer of device 0000:00:19.0 to 64
[   15.923693] e1000: 0000:00:19.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:1f:29:87:64:0d
[   15.941344] usbcore: registered new interface driver usbfs
[   15.941363] usbcore: registered new interface driver hub
[   15.944571] usbcore: registered new device driver usb
[   15.950820] USB Universal Host Controller Interface driver v3.0
[   15.972552] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
[   15.972683] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
[   15.972695] PCI: Setting latency timer of device 0000:00:1a.0 to 64
[   15.972699] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[   15.972968] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[   15.973005] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00004040
[   15.973122] usb usb1: configuration #1 chosen from 1 choice
[   15.973141] hub 1-0:1.0: USB hub found
[   15.973145] hub 1-0:1.0: 2 ports detected
[   16.058653] SCSI subsystem initialized
[   16.074736] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 20
[   16.074749] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[   16.074753] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[   16.074774] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[   16.074808] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00004060
[   16.074907] usb usb2: configuration #1 chosen from 1 choice
[   16.074927] hub 2-0:1.0: USB hub found
[   16.074931] hub 2-0:1.0: 2 ports detected
[   16.090643] libata version 3.00 loaded.
[   16.178675] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 21
[   16.178689] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[   16.178692] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[   16.178713] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[   16.178746] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00004080
[   16.178839] usb usb3: configuration #1 chosen from 1 choice
[   16.178855] hub 3-0:1.0: USB hub found
[   16.178860] hub 3-0:1.0: 2 ports detected
[   16.282605] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[   16.282618] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[   16.282622] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[   16.282643] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[   16.282675] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000040a0
[   16.282773] usb usb4: configuration #1 chosen from 1 choice
[   16.282795] hub 4-0:1.0: USB hub found
[   16.282799] hub 4-0:1.0: 2 ports detected
[   16.386702] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
[   16.386846] PCI: Setting latency timer of device 0000:00:1a.7 to 64
[   16.386852] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[   16.386903] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 5
[   16.390818] ehci_hcd 0000:00:1a.7: debug port 1
[   16.390825] PCI: cache line size of 32 is not supported by device 0000:00:1a.7
[   16.390831] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xe4621000
[   16.406427] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   16.406533] usb usb5: configuration #1 chosen from 1 choice
[   16.406553] hub 5-0:1.0: USB hub found
[   16.406559] hub 5-0:1.0: 4 ports detected
[   16.510469] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 20
[   16.510624] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[   16.510630] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[   16.510677] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 6
[   16.514593] ehci_hcd 0000:00:1d.7: debug port 1
[   16.514599] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[   16.514605] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xe4628000
[   16.530380] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   16.530485] usb usb6: configuration #1 chosen from 1 choice
[   16.530505] hub 6-0:1.0: USB hub found
[   16.530511] hub 6-0:1.0: 6 ports detected
[   16.636323] ahci 0000:00:1f.2: version 3.0
[   16.636356] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 17
[   16.636538] ahci 0000:00:1f.2: nr_ports (3) and implemented port map (0x1) don't match, using nr_ports
[   16.636541] ahci 0000:00:1f.2: forcing PORTS_IMPL to 0x7
[   16.698622] Clocksource tsc unstable (delta = -474058044 ns)
[   16.719354] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
[   16.719358] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part 
[   16.719364] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[   16.720245] scsi0 : ahci
[   16.720497] scsi1 : ahci
[   16.720636] scsi2 : ahci
[   16.720688] ata1: SATA max UDMA/133 abar m2048@0xe4629000 port 0xe4629100 irq 508
[   16.720692] ata2: SATA max UDMA/133 abar m2048@0xe4629000 port 0xe4629180 irq 508
[   16.720695] ata3: SATA max UDMA/133 abar m2048@0xe4629000 port 0xe4629200 irq 508
[   16.741823] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   16.741958] ata1.00: ATA-7: ST9120822AS, 3.BHE, max UDMA/100
[   16.741960] ata1.00: 234441648 sectors, multi 16: LBA48 
[   16.742177] ata1.00: configured for UDMA/100
[   16.755694] ata2: SATA link down (SStatus 0 SControl 0)
[   16.768082] ata3: SATA link down (SStatus 0 SControl 0)
[   16.768199] scsi 0:0:0:0: Direct-Access     ATA      ST9120822AS      3.BH PQ: 0 ANSI: 5
[   16.769139] ata_piix 0000:00:1f.1: version 2.12
[   16.769159] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16
[   16.769195] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[   16.769927] scsi3 : ata_piix
[   16.770290] scsi4 : ata_piix
[   16.770781] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x40c0 irq 14
[   16.770783] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x40c8 irq 15
[   16.777195] Driver 'sd' needs updating - please use bus_type methods
[   16.778523] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
[   16.778535] sd 0:0:0:0: [sda] Write Protect is off
[   16.778537] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   16.778549] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   16.778599] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
[   16.778606] sd 0:0:0:0: [sda] Write Protect is off
[   16.778608] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   16.778619] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   16.778623]  sda: sda1 sda2 < sda5 >
[   16.780413] sd 0:0:0:0: [sda] Attached SCSI disk
[   16.785003] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   16.834159] ata4.00: ATAPI: HL-DT-ST DVDRAM GSA-T20L, NC08, max MWDMA2
[   16.852094] Attempting manual resume
[   16.852097] swsusp: Resume From Partition 8:5
[   16.852098] PM: Checking swsusp image.
[   16.852232] PM: Resume from disk failed.
[   16.866940] kjournald starting.  Commit interval 5 seconds
[   16.866952] EXT3-fs: mounted filesystem with ordered data mode.
[   16.889989] ata4.00: configured for MWDMA2
[   16.890042] ata5: port disabled. ignoring.
[   16.891973] scsi 3:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-T20L  NC08 PQ: 0 ANSI: 5
[   16.892034] scsi 3:0:0:0: Attached scsi generic sg1 type 5
[   19.546365] input: PC Speaker as /devices/platform/pcspkr/input/input2
[   19.697996] iTCO_vendor_support: vendor-support=0
[   19.741968] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[   19.742058] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
[   19.742096] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   19.815760] agpgart: Detected an Intel 965GME/GLE Chipset.
[   19.816015] agpgart: Detected 7676K stolen memory.
[   19.829866] agpgart: AGP aperture is 256M @ 0xd0000000
[   19.881912] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   19.910420] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   20.017917] input: Power Button (FF) as /devices/virtual/input/input3
[   20.053791] ACPI: Power Button (FF) [PWRF]
[   20.053873] input: Sleep Button (CM) as /devices/virtual/input/input4
[   20.081765] ACPI: Sleep Button (CM) [C2B4]
[   20.081817] input: Lid Switch as /devices/virtual/input/input5
[   20.097864] ACPI: Lid Switch [C154]
[   20.098361] ACPI: AC Adapter [C23A] (off-line)
[   20.174778] ACPI: Battery Slot [C23B] (battery present)
[   20.227417] ACPI: WMI-Acer: Mapper loaded
[   21.031540] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1a0b1, caps: 0xa04713/0x200000
[   21.070882] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input6
[   21.191844] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input7
[   21.221091] ACPI: Video Device [C099] (multi-head: yes  rom: no  post: no)
[   21.337787] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
[   21.337949] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[   21.716768] Driver 'sr' needs updating - please use bus_type methods
[   21.731335] ieee80211_crypt: registered algorithm 'NULL'
[   21.732514] wl: module license 'unspecified' taints kernel.
[   21.732636] wl: Unknown symbol wlc_get
[   21.732776] wl: Unknown symbol wf_channel2mhz
[   21.732793] wl: Unknown symbol wlc_isr
[   21.732822] wl: Unknown symbol wlc_set
[   21.732850] wl: Unknown symbol wlc_statsupd
[   21.732879] wl: Unknown symbol bcm_bprintf
[   21.732967] wl: Unknown symbol wlc_dpc
[   21.733012] wl: Unknown symbol wlc_chipmatch
[   21.733044] wl: Unknown symbol wlc_reset
[   21.733100] wl: Unknown symbol wlc_sendpkt
[   21.733143] wl: Unknown symbol wlc_intrsrestore
[   21.733160] wl: Unknown symbol wlc_init
[   21.733179] wl: Unknown symbol bcm_parse_tlvs
[   21.733249] wl: Unknown symbol wlc_down
[   21.733277] wl: Unknown symbol wlc_iovar_getint
[   21.733305] wl: Unknown symbol wlc_iovar_setint
[   21.733332] wl: Unknown symbol wlc_up
[   21.733379] wl: Unknown symbol bcm_qdbm_to_mw
[   21.733397] wl: Unknown symbol bcm_mkiovar
[   21.733420] wl: Unknown symbol wlc_intrsoff
[   21.733438] wl: Unknown symbol bcm_mw_to_qdbm
[   21.733468] wl: Unknown symbol wlc_intrsupd
[   21.733485] wl: Unknown symbol wlc_ioctl
[   21.733511] wl: Unknown symbol wf_mhz2channel
[   21.733528] wl: Unknown symbol wlc_intrson
[   21.733545] wl: Unknown symbol wlc_attach
[   21.733581] wl: Unknown symbol wlc_iovar_op
[   21.733598] wl: Unknown symbol wlc_detach
[   21.733625] wl: Unknown symbol pktsetprio
[   21.735920] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[   21.735925] Uniform CD-ROM driver Revision: 3.20
[   21.735978] sr 3:0:0:0: Attached scsi CD-ROM sr0
[   24.133464] lp: driver loaded but no devices found
[   24.291817] Adding 2988048k swap on /dev/sda5.  Priority:-1 extents:1 across:2988048k
[   24.310354] EXT3 FS on sda1, internal journal
[   24.614984] ip_tables: (C) 2000-2006 Netfilter Core Team
[   24.884498] No dock devices found.
[   25.481337] ppdev: user-space parallel port driver
[   25.498927] audit(1215329183.875:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=4860 profile="/usr/sbin/cupsd" namespace="default"
[   25.908514] e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
[   25.908520] e1000: eth0: e1000_watchdog: 10/100 speed: disabling TSO
[   26.018881] Bluetooth: Core ver 2.11
[   26.019454] NET: Registered protocol family 31
[   26.019458] Bluetooth: HCI device and connection manager initialized
[   26.019461] Bluetooth: HCI socket layer initialized
[   26.059024] Bluetooth: L2CAP ver 2.9
[   26.059028] Bluetooth: L2CAP socket layer initialized
[   26.093131] Bluetooth: RFCOMM socket layer initialized
[   26.093149] Bluetooth: RFCOMM TTY layer initialized
[   26.093151] Bluetooth: RFCOMM ver 1.8
[   27.231124] [drm] Initialized drm 1.1.0 20060810
[   27.233736] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
[   27.233744] PCI: Setting latency timer of device 0000:00:02.0 to 64
[   27.233809] [drm] Initialized i915 1.6.0 20060119 on minor 0
[   27.671332] NET: Registered protocol family 17
[   27.951561] NET: Registered protocol family 10
[   27.951733] lo: Disabled Privacy Extensions
[   29.390554] eth0: no IPv6 routers present
[  412.501859] usb 6-4: new high speed USB device using ehci_hcd and address 2
[  412.636288] usb 6-4: configuration #1 chosen from 1 choice
[  412.662208] usb 6-4: USB disconnect, address 2
[  412.793658] usbcore: registered new interface driver libusual
[  413.900307] usb 6-4: new high speed USB device using ehci_hcd and address 3
[  414.034954] usb 6-4: configuration #1 chosen from 1 choice
[  414.076129] Initializing USB Mass Storage driver...
[  414.092211] scsi5 : SCSI emulation for USB Mass Storage devices
[  414.092794] usbcore: registered new interface driver usb-storage
[  414.092799] USB Mass Storage support registered.
[  414.093111] usb-storage: device found at 3
[  414.093113] usb-storage: waiting for device to settle before scanning
[  419.086728] usb-storage: device scan complete
[  419.087468] scsi 5:0:0:0: Direct-Access     Multi    Flash Reader     1.00 PQ: 0 ANSI: 0
[  419.796695] sd 5:0:0:0: [sdb] 3870720 512-byte hardware sectors (1982 MB)
[  419.797807] sd 5:0:0:0: [sdb] Write Protect is off
[  419.797811] sd 5:0:0:0: [sdb] Mode Sense: 03 00 00 00
[  419.797813] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[  419.800548] sd 5:0:0:0: [sdb] 3870720 512-byte hardware sectors (1982 MB)
[  419.802446] sd 5:0:0:0: [sdb] Write Protect is off
[  419.802451] sd 5:0:0:0: [sdb] Mode Sense: 03 00 00 00
[  419.802453] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[  419.802459]  sdb: sdb1
[  419.804260] sd 5:0:0:0: [sdb] Attached SCSI removable disk
[  419.804300] sd 5:0:0:0: Attached scsi generic sg2 type 0
[ 1982.351965] usb 6-4: USB disconnect, address 3
utente@utente-laptop:~$ 

ho fatto la prova e con kernel antecedenti al -19 non ci sono i driver.
col -19 me li ritrovo abilitati ma non in uso.

[Cobra78]

Ummmh.........sembra proprio ci sia qualche problema coi driver.....ma che strano.....

Prova a fare così: da terminale entra nella directory /lib/firmware/2.6.24-19-generic

dai un ls e posti il risultato, così vediamo che cavolo di firmware ci sono li.

[loolee]

fatto:

Codice: Seleziona tutto

utente@utente-laptop:/lib/firmware/2.6.24-19-generic$ ls
acx                                 dvb-usb-vp7045-01.fw
aic94xx-seq.fw                      dvb-usb-wt220u-02.fw
atmel_at76c502_3com.bin             dvb-usb-wt220u-fc03.fw
atmel_at76c502_3com-wpa.bin         dvb-usb-wt220u-zl0353-01.fw
atmel_at76c502.bin                  ipw2100-1.3.fw
atmel_at76c502d.bin                 ipw2100-1.3-i.fw
atmel_at76c502d-wpa.bin             ipw2100-1.3-p.fw
atmel_at76c502e.bin                 ipw2200-bss.fw
atmel_at76c502e-wpa.bin             ipw2200-ibss.fw
atmel_at76c502-wpa.bin              ipw2200-sniffer.fw
atmel_at76c503-i3861.bin            isl3877
atmel_at76c503-i3863.bin            isl3886
atmel_at76c503-rfmd-0.90.2-140.bin  isl3887usb_bare
atmel_at76c503-rfmd-acc.bin         isl3890
atmel_at76c503-rfmd.bin             isl3890usb
atmel_at76c504_2958-wpa.bin         iwlwifi-3945-1.ucode
atmel_at76c504a_2958-wpa.bin        iwlwifi-3945.ucode
atmel_at76c504.bin                  iwlwifi-4965-1-lbm.ucode
atmel_at76c504c-wpa.bin             iwlwifi-4965-1.ucode
atmel_at76c505a-rfmd2958.bin        iwlwifi-4965.ucode
atmel_at76c505-rfmd2958.bin         ql2100_fw.bin
atmel_at76c505-rfmd.bin             ql2200_fw.bin
atmel_at76c506.bin                  ql2300_fw.bin
atmel_at76c506-wpa.bin              ql2322_fw.bin
dvb-fe-or51132-qam.fw               ql2400_fw.bin
dvb-fe-or51132-vsb.fw               rt2561.bin
dvb-fe-or51211.fw                   rt2561s.bin
dvb-fe-tda10046.fw                  rt2661.bin
dvb-ttpci-01.fw                     rt73.bin
dvb-usb-avertv-a800-02.fw           v4l-cx2341x-dec.fw
dvb-usb-bluebird-01.fw              v4l-cx2341x-enc.fw
dvb-usb-dib0700-1.10.fw             v4l-cx2341x-init.mpg
dvb-usb-dibusb-5.0.0.11.fw          v4l-cx25840.fw
dvb-usb-dibusb-6.0.0.8.fw           v4l-pvrusb2-24xxx-01.fw
dvb-usb-dtt200u-01.fw               v4l-pvrusb2-29xxx-01.fw
dvb-usb-tvwalkert.fw                zd1201-ap.fw
dvb-usb-umt-010-02.fw               zd1201.fw
dvb-usb-vp702x-01.fw                zd1211
utente@utente-laptop:/lib/firmware/2.6.24-19-generic$ 

[Cobra78]

Non c'è il firmware per la scheda ovviamente.

RIpeti la procedura, assicurandoti di scaricare il firmware giusto, con il kernel -19, e incrocia le dita :P

[loolee]

ma com'è che prima funzionava?
riprovo la procedura e ti faccio sapere.

grazie!!!

[loolee]

procedura rifatta
niente da fare...

di seguito il risultato del comando ls dentro /lib/firmware/2.6.24-19-generic

Codice: Seleziona tutto

utente@utente-laptop:~$ cd /lib/firmware/2.6.24-19-generic
utente@utente-laptop:/lib/firmware/2.6.24-19-generic$ ls
acx                                 dvb-usb-vp7045-01.fw
aic94xx-seq.fw                      dvb-usb-wt220u-02.fw
atmel_at76c502_3com.bin             dvb-usb-wt220u-fc03.fw
atmel_at76c502_3com-wpa.bin         dvb-usb-wt220u-zl0353-01.fw
atmel_at76c502.bin                  ipw2100-1.3.fw
atmel_at76c502d.bin                 ipw2100-1.3-i.fw
atmel_at76c502d-wpa.bin             ipw2100-1.3-p.fw
atmel_at76c502e.bin                 ipw2200-bss.fw
atmel_at76c502e-wpa.bin             ipw2200-ibss.fw
atmel_at76c502-wpa.bin              ipw2200-sniffer.fw
atmel_at76c503-i3861.bin            isl3877
atmel_at76c503-i3863.bin            isl3886
atmel_at76c503-rfmd-0.90.2-140.bin  isl3887usb_bare
atmel_at76c503-rfmd-acc.bin         isl3890
atmel_at76c503-rfmd.bin             isl3890usb
atmel_at76c504_2958-wpa.bin         iwlwifi-3945-1.ucode
atmel_at76c504a_2958-wpa.bin        iwlwifi-3945.ucode
atmel_at76c504.bin                  iwlwifi-4965-1-lbm.ucode
atmel_at76c504c-wpa.bin             iwlwifi-4965-1.ucode
atmel_at76c505a-rfmd2958.bin        iwlwifi-4965.ucode
atmel_at76c505-rfmd2958.bin         ql2100_fw.bin
atmel_at76c505-rfmd.bin             ql2200_fw.bin
atmel_at76c506.bin                  ql2300_fw.bin
atmel_at76c506-wpa.bin              ql2322_fw.bin
dvb-fe-or51132-qam.fw               ql2400_fw.bin
dvb-fe-or51132-vsb.fw               rt2561.bin
dvb-fe-or51211.fw                   rt2561s.bin
dvb-fe-tda10046.fw                  rt2661.bin
dvb-ttpci-01.fw                     rt73.bin
dvb-usb-avertv-a800-02.fw           v4l-cx2341x-dec.fw
dvb-usb-bluebird-01.fw              v4l-cx2341x-enc.fw
dvb-usb-dib0700-1.10.fw             v4l-cx2341x-init.mpg
dvb-usb-dibusb-5.0.0.11.fw          v4l-cx25840.fw
dvb-usb-dibusb-6.0.0.8.fw           v4l-pvrusb2-24xxx-01.fw
dvb-usb-dtt200u-01.fw               v4l-pvrusb2-29xxx-01.fw
dvb-usb-tvwalkert.fw                zd1201-ap.fw
dvb-usb-umt-010-02.fw               zd1201.fw
dvb-usb-vp702x-01.fw                zd1211

che faccio?? >:(