pc card

Riconoscimento, installazione e configurazione delle periferiche.
Flo
Prode Principiante
Messaggi: 30
Iscrizione: sabato 17 maggio 2008, 0:23

pc card

Messaggio da Flo »

ragazzi ho preso una pccard usrobotics per un acer aspire 1600, purtroppo però al contrario della penna usb wireless (anch'essa usrobotics) non la rileva, che posso fare? provo a installare il software con wine o devo dare qualche comando da terminale?
grazie in anticipo a chi mi da qualche dritta  (b2b)
nadiag81
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 369
Iscrizione: lunedì 26 maggio 2008, 23:19

Re: pc card

Messaggio da nadiag81 »

hai provato con
sudo fdisk -l
per vedere se c'è? se si, ti basta creare un punto di mount e editare il file /etc/fstab
Avatar utente
Cobra78
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 991
Iscrizione: giovedì 18 agosto 2005, 11:08
Località: Ferrara
Contatti:

Re: pc card

Messaggio da Cobra78 »

nadiag81 ha scritto: hai provato con
sudo fdisk -l
per vedere se c'è? se si, ti basta creare un punto di mount e editare il file /etc/fstab
Scusa che c'entra? Mica è un hard disk -.-

Piuttosto prova a inserirla e poi dare un dmesg, e vedere che ne esce!
Dell Inspiron 1720 Ice White Windows 7 Professional/Archlinux x86_64 - 2.6.38.x - Gnome3
Msi Wind U100 Windows Xp/Ubuntu 11.04 - Gnome3
nadiag81
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 369
Iscrizione: lunedì 26 maggio 2008, 23:19

Re: pc card

Messaggio da nadiag81 »

chiedo scusa, hai ragione... a volte mi faccio prendere dall'entusiasmo nel rispondere e non leggo con la dovuta attenzione...
Flo
Prode Principiante
Messaggi: 30
Iscrizione: sabato 17 maggio 2008, 0:23

Re: pc card

Messaggio da Flo »

dando il comando che mi avete suggerito ho letto che la pccard viene rilevata, ma come faccio ad attivarla?
Avatar utente
Cobra78
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 991
Iscrizione: giovedì 18 agosto 2005, 11:08
Località: Ferrara
Contatti:

Re: pc card

Messaggio da Cobra78 »

Errr....postaci il risultato, così sappiamo anche noi che roba è e possiamo aiutarti meglio :P
Dell Inspiron 1720 Ice White Windows 7 Professional/Archlinux x86_64 - 2.6.38.x - Gnome3
Msi Wind U100 Windows Xp/Ubuntu 11.04 - Gnome3
Flo
Prode Principiante
Messaggi: 30
Iscrizione: sabato 17 maggio 2008, 0:23

Re: pc card

Messaggio da Flo »

[  10.553933] Freeing SMP alternatives: 11k freed
[  10.554091] Early unpacking initramfs... done
[  10.883104] ACPI: Core revision 20070126
[  10.883175] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[  10.886937] CPU0: Intel(R) Pentium(R) 4 CPU 2.60GHz stepping 09
[  10.886985] Total of 1 processors activated (5184.02 BogoMIPS).
[  10.887100] ENABLING IO-APIC IRQs
[  10.887290] ..TIMER: vector=0x31 apic1=0 pin1=16 apic2=-1 pin2=-1
[  10.926978] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
[  10.927024] ...trying to set up timer (IRQ0) through the 8259A ...  failed.
[  10.927028] ...trying to set up timer as Virtual Wire IRQ... works.
[  11.071172] Brought up 1 CPUs
[  11.071199] CPU0 attaching sched-domain:
[  11.071202]  domain 0: span 01
[  11.071205]  groups: 01
[  11.071439] net_namespace: 64 bytes
[  11.071450] Booting paravirtualized kernel on bare hardware
[  11.072059] Time: 17:16:36  Date: 07/07/08
[  11.072095] NET: Registered protocol family 16
[  11.072356] EISA bus registered
[  11.072384] ACPI: bus type pci registered
[  11.074044] PCI: PCI BIOS revision 2.10 entry at 0xfd649, last bus=1
[  11.074047] PCI: Using configuration type 1
[  11.074060] Setting up standard PCI resources
[  11.084554] ACPI: EC: Look up EC in DSDT
[  11.086380] ACPI: Interpreter enabled
[  11.086384] ACPI: (supports S0 S3 S4 S5)
[  11.086397] ACPI: Using IOAPIC for interrupt routing
[  11.102631] ACPI: EC: GPE = 0x1e, I/O: command/status = 0x66, data = 0x62
[  11.102636] ACPI: EC: driver started in poll mode
[  11.102687] ACPI: PCI Root Bridge [PCI0] (0000:00)
[  11.102932] Enabling SiS 96x SMBus.
[  11.104089] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[  11.111069] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 *11)
[  11.111159] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 *11)
[  11.111236] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 *11)
[  11.111312] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 *11)
[  11.111405] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 *11)
[  11.111482] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 *11)
[  11.111559] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 *11)
[  11.111636] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 *11)
[  11.111781] Linux Plug and Play Support v0.97 (c) Adam Belay
[  11.111822] pnp: PnP ACPI init
[  11.111833] ACPI: bus type pnp registered
[  11.118948] pnp: PnP ACPI: found 10 devices
[  11.118951] ACPI: ACPI bus type pnp unregistered
[  11.118956] PnPBIOS: Disabled by ACPI PNP
[  11.119276] PCI: Using ACPI for IRQ routing
[  11.119280] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[  11.135065] NET: Registered protocol family 8
[  11.135068] NET: Registered protocol family 20
[  11.135163] AppArmor: AppArmor Filesystem Enabled
[  11.139043] Time: tsc clocksource has been installed.
[  11.147092] system 00:04: ioport range 0x8000-0x80fe has been reserved
[  11.147096] system 00:04: ioport range 0x9000-0x907f could not be reserved
[  11.147099] system 00:04: ioport range 0x4d0-0x4d1 has been reserved
[  11.147101] system 00:04: ioport range 0xfe00-0xfe00 has been reserved
[  11.147106] system 00:04: iomem range 0xc8000-0xcffff could not be reserved
[  11.147109] system 00:04: iomem range 0xfec00000-0xfec00fff could not be reserved
[  11.147112] system 00:04: iomem range 0xfee00000-0xfee00fff could not be reserved
[  11.147115] system 00:04: iomem range 0xffc00000-0xffc00fff has been reserved
[  11.147118] system 00:04: iomem range 0xffe00000-0xffe00fff has been reserved
[  11.147121] system 00:04: iomem range 0xffe80000-0xffefffff has been reserved
[  11.177630] PCI: Bridge: 0000:00:01.0
[  11.177635]  IO window: a000-afff
[  11.177642]  MEM window: ec100000-ec1fffff
[  11.177647]  PREFETCH window: f0000000-f7ffffff
[  11.177654] PCI: Bus 2, cardbus bridge: 0000:00:09.0
[  11.177656]  IO window: 00002400-000024ff
[  11.177661]  IO window: 00002800-000028ff
[  11.177666]  PREFETCH window: 50000000-53ffffff
[  11.177671]  MEM window: 54000000-57ffffff
[  11.177676] PCI: Bus 6, cardbus bridge: 0000:00:09.1
[  11.177678]  IO window: 00002c00-00002cff
[  11.177683]  IO window: 00003000-000030ff
[  11.177688]  PREFETCH window: 58000000-5bffffff
[  11.177693]  MEM window: 5c000000-5fffffff
[  11.177737] ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 16 (level, low) -> IRQ 16
[  11.177758] ACPI: PCI Interrupt 0000:00:09.1 -> GSI 17 (level, low) -> IRQ 17
[  11.177777] NET: Registered protocol family 2
[  11.215072] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[  11.215516] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[  11.216973] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[  11.217902] TCP: Hash tables configured (established 131072 bind 65536)
[  11.217908] TCP reno registered
[  11.227208] checking if image is initramfs... it is
[  11.678476] Switched to high resolution mode on CPU 0
[  11.872459] Freeing initrd memory: 7309k freed
[  11.872720] Simple Boot Flag at 0x35 set to 0x1
[  11.873225] audit: initializing netlink socket (disabled)
[  11.873249] audit(1215450996.268:1): initialized
[  11.873495] highmem bounce pool size: 64 pages
[  11.875775] VFS: Disk quotas dquot_6.5.1
[  11.875873] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[  11.876045] io scheduler noop registered
[  11.876048] io scheduler anticipatory registered
[  11.876050] io scheduler deadline registered
[  11.876063] io scheduler cfq registered (default)
[  12.293732] Boot video device is 0000:01:00.0
[  12.294083] isapnp: Scanning for PnP cards...
[  12.647743] isapnp: No Plug & Play device found
[  12.683563] Real Time Clock Driver v1.12ac
[  12.683690] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[  12.684466] ACPI: PCI Interrupt 0000:00:02.6[C] -> GSI 18 (level, low) -> IRQ 18
[  12.684475] ACPI: PCI interrupt for device 0000:00:02.6 disabled
[  12.685273] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[  12.685364] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[  12.685494] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[  12.687779] i8042.c: Detected active multiplexing controller, rev 1.1.
[  12.690290] serio: i8042 KBD port at 0x60,0x64 irq 1
[  12.690296] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[  12.690299] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[  12.690302] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[  12.690305] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[  12.701303] mice: PS/2 mouse device common for all mice
[  12.701453] EISA: Probing bus 0 at eisa.0
[  12.701461] Cannot allocate resource for EISA slot 1
[  12.701464] Cannot allocate resource for EISA slot 2
[  12.701467] Cannot allocate resource for EISA slot 3
[  12.701483] Cannot allocate resource for EISA slot 8
[  12.701485] EISA: Detected 0 cards.
[  12.701489] cpuidle: using governor ladder
[  12.701491] cpuidle: using governor menu
[  12.701613] NET: Registered protocol family 1
[  12.701652] Using IPI No-Shortcut mode
[  12.701693] registered taskstats version 1
[  12.701816]  Magic number: 0:55:289
[  12.701844]  hash matches device ttyz3
[  12.701956]  hash matches device tty22
[  12.701987] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[  12.701989] EDD information not available.
[  12.702501] Freeing unused kernel memory: 368k freed
[  12.737220] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[  14.015410] fuse init (API version 7.9)
[  14.041600] ACPI: CPU0 (power states: C1[C1] C2[C2])
[  14.041623] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
[  14.054320] ACPI: Thermal Zone [THRS] (58 C)
[  14.059682] ACPI: Thermal Zone [THRC] (32 C)
[  14.779124] SCSI subsystem initialized
[  14.854753] libata version 3.00 loaded.
[  14.865668] usbcore: registered new interface driver usbfs
[  14.865701] usbcore: registered new interface driver hub
[  14.879974] ACPI: PCI Interrupt 0000:00:02.3 -> GSI 17 (level, low) -> IRQ 17
[  14.931761] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[17]  MMIO=[ec000000-ec0007ff]  Max Packet=[2048]  IR/IT contexts=[4/6]
[  14.949665] usbcore: registered new device driver usb
[  14.974676] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[  15.000907] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[  15.049460] 8139cp 0000:00:07.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
[  15.049467] 8139cp 0000:00:07.0: Try the "8139too" driver instead.
[  15.052753] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 19
[  15.052771] ohci_hcd 0000:00:03.0: OHCI Host Controller
[  15.053217] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1
[  15.053244] ohci_hcd 0000:00:03.0: irq 19, io mem 0xec001000
[  15.058772] 8139too Fast Ethernet driver 0.9.28
[  15.108646] usb usb1: configuration #1 chosen from 1 choice
[  15.108679] hub 1-0:1.0: USB hub found
[  15.108690] hub 1-0:1.0: 2 ports detected
[  15.138521] Floppy drive(s): fd0 is 1.44M
[  15.162797] FDC 0 is a National Semiconductor PC87306
[  15.210514] ACPI: PCI Interrupt 0000:00:03.1 -> GSI 21 (level, low) -> IRQ 20
[  15.210539] ohci_hcd 0000:00:03.1: OHCI Host Controller
[  15.210570] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2
[  15.210591] ohci_hcd 0000:00:03.1: irq 20, io mem 0xec002000
[  15.268398] usb usb2: configuration #1 chosen from 1 choice
[  15.268431] hub 2-0:1.0: USB hub found
[  15.268441] hub 2-0:1.0: 2 ports detected
[  15.370290] ACPI: PCI Interrupt 0000:00:03.2[C] -> GSI 22 (level, low) -> IRQ 21
[  15.370315] ohci_hcd 0000:00:03.2: OHCI Host Controller
[  15.370347] ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 3
[  15.370369] ohci_hcd 0000:00:03.2: irq 21, io mem 0xec003000
[  15.428206] usb usb3: configuration #1 chosen from 1 choice
[  15.428238] hub 3-0:1.0: USB hub found
[  15.428249] hub 3-0:1.0: 2 ports detected
[  15.530243] ACPI: PCI Interrupt 0000:00:03.3[D] -> GSI 23 (level, low) -> IRQ 22
[  15.530265] ehci_hcd 0000:00:03.3: EHCI Host Controller
[  15.530297] ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 4
[  15.530353] PCI: cache line size of 128 is not supported by device 0000:00:03.3
[  15.530366] ehci_hcd 0000:00:03.3: irq 22, io mem 0xec004000
[  15.541924] ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[  15.542093] usb usb4: configuration #1 chosen from 1 choice
[  15.542123] hub 4-0:1.0: USB hub found
[  15.542133] hub 4-0:1.0: 6 ports detected
[  15.646316] ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 19 (level, low) -> IRQ 23
[  15.647016] eth0: RealTek RTL8139 at 0x1800, 00:0a:e4:45:2c:b3, IRQ 23
[  15.647020] eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
[  15.647394] pata_sis 0000:00:02.5: version 0.5.2
[  15.647428] ACPI: PCI Interrupt 0000:00:02.5[A] -> GSI 16 (level, low) -> IRQ 16
[  15.649466] scsi0 : pata_sis
[  15.650642] scsi1 : pata_sis
[  15.651192] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x2000 irq 14
[  15.651195] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x2008 irq 15
[  15.813950] ata1.00: ATA-5: HITACHI_DK23EA-40, 00K3A0A1, max UDMA/100
[  15.813955] ata1.00: 78140160 sectors, multi 16: LBA
[  15.821969] ata1.00: configured for UDMA/100
[  16.141572] ata2.00: ATAPI: MATSHITADVD-RAM UJ-811, H100, max UDMA/33
[  16.313376] ata2.00: configured for UDMA/33
[  16.313546] scsi 0:0:0:0: Direct-Access    ATA      HITACHI_DK23EA-4 00K3 PQ: 0 ANSI: 5
[  16.316046] scsi 1:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ-811  H100 PQ: 0 ANSI: 5
[  16.321391] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[000ae40332102229]
[  16.333742] Driver 'sd' needs updating - please use bus_type methods
[  16.333866] sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors (40008 MB)
[  16.333884] sd 0:0:0:0: [sda] Write Protect is off
[  16.333887] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[  16.333911] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[  16.333976] sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors (40008 MB)
[  16.333991] sd 0:0:0:0: [sda] Write Protect is off
[  16.333994] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[  16.334016] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[  16.334021]  sda:Driver 'sr' needs updating - please use bus_type methods
[  16.360551]  sda1 sda2
[  16.391001] sd 0:0:0:0: [sda] Attached SCSI disk
[  16.399692] sd 0:0:0:0: Attached scsi generic sg0 type 0
[  16.399719] sr 1:0:0:0: Attached scsi generic sg1 type 5
[  16.439252] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[  16.439260] Uniform CD-ROM driver Revision: 3.20
[  16.439342] sr 1:0:0:0: Attached scsi CD-ROM sr0
[  16.761768] Attempting manual resume
[  16.761773] swsusp: Resume From Partition 8:5
[  16.761775] PM: Checking swsusp image.
[  16.762037] PM: Resume from disk failed.
[  16.821072] kjournald starting.  Commit interval 5 seconds
[  16.821093] EXT3-fs: mounted filesystem with ordered data mode.
[  33.717397] ip_tables: (C) 2000-2006 Netfilter Core Team
[  33.779618] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[  34.959402] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[  35.015940] Linux agpgart interface v0.102
[  35.187049] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[  35.417828] agpgart: Detected SiS chipset - id:1606
[  35.422213] agpgart: AGP aperture is 64M @ 0xe8000000
[  35.498658] sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x9000
[  35.718683] ACPI: AC Adapter [AC] (on-line)
[  35.774396] input: Power Button (FF) as /devices/virtual/input/input2
[  35.786237] ACPI: Power Button (FF) [PWRF]
[  35.786349] input: Power Button (CM) as /devices/virtual/input/input3
[  35.802208] ACPI: Power Button (CM) [PWB]
[  35.802301] input: Sleep Button (CM) as /devices/virtual/input/input4
[  35.818202] ACPI: Sleep Button (CM) [SLP2]
[  35.818323] input: Lid Switch as /devices/virtual/input/input5
[  35.824900] ACPI: Lid Switch [liD]
[  35.869949] ACPI: EC: non-query interrupt received, switching to interrupt mode
[  35.910770] ACPI: Battery Slot [BAT0] (battery present)
[  37.269707] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:08/LNXVIDEO:00/input/input6
[  37.280519] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[  37.553376] Yenta: CardBus bridge found at 0000:00:09.0 [17c0:3202]
[  37.553400] Yenta: Enabling burst memory read transactions
[  37.553406] Yenta: Using CSCINT to route CSC interrupts to PCI
[  37.553408] Yenta: Routing CardBus interrupts to PCI
[  37.553413] Yenta TI: socket 0000:00:09.0, mfunc 0x01001022, devctl 0x64
[  37.784569] Yenta: ISA IRQ mask 0x0cb8, PCI irq 16
[  37.784575] Socket status: 30000006
[  37.836085] Yenta: CardBus bridge found at 0000:00:09.1 [17c0:3202]
[  37.836109] Yenta: Using CSCINT to route CSC interrupts to PCI
[  37.836111] Yenta: Routing CardBus interrupts to PCI
[  37.836117] Yenta TI: socket 0000:00:09.1, mfunc 0x01001022, devctl 0x64
[  38.068242] Yenta: ISA IRQ mask 0x0cb8, PCI irq 17
[  38.068249] Socket status: 30000020
[  38.107724] input: PC Speaker as /devices/platform/pcspkr/input/input7
[  38.163491] ACPI: PCI Interrupt 0000:00:02.7[C] -> GSI 18 (level, low) -> IRQ 18
[  38.559363] ACPI: WMI-Acer: Mapper loaded
[  38.723029] acer_acpi: Acer Laptop ACPI Extras version 0.11.1
[  38.723047] acer_acpi: No or unsupported WMI interface, unable to load.
[  38.810689] pccard: CardBus card inserted into slot 1
[  38.991125] intel8x0_measure_ac97_clock: measured 56031 usecs
[  38.991130] intel8x0: clocking to 48000
[  39.037620] Synaptics Touchpad, model: 1, fw: 5.8, id: 0x9248b1, caps: 0x904713/0x4000
[  39.082490] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input8
[  39.113853] parport_pc 00:09: activated
[  39.113861] parport_pc 00:09: reported by Plug and Play ACPI
[  39.113971] parport0: PC-style at 0x378 (0x778), irq 5, dma 1 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[  40.924325] r8169 Gigabit Ethernet driver 2.2LK loaded
[  40.924355] PCI: Enabling device 0000:06:00.0 (0000 -> 0003)
[  40.924366] ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[  40.924395] PCI: Setting latency timer of device 0000:06:00.0 to 64
[  40.924836] eth1: RTL8169sb/8110sb at 0xf8aa8000, 00:c0:49:f4:61:9e, XID 10000000 IRQ 17
[  41.072467] udev: renamed network interface eth1 to eth2
[  41.283281] cs: IO port probe 0x100-0x3af: clean.
[  41.285167] cs: IO port probe 0x3e0-0x4ff: excluding 0x480-0x48f
[  41.285933] cs: IO port probe 0x820-0x8ff: clean.
[  41.286599] cs: IO port probe 0xc00-0xcf7: clean.
[  41.287450] cs: IO port probe 0xa00-0xaff: clean.
[  41.288524] cs: IO port probe 0x100-0x3af: clean.
[  41.290390] cs: IO port probe 0x3e0-0x4ff: excluding 0x480-0x48f
[  41.291156] cs: IO port probe 0x820-0x8ff: clean.
[  41.291836] cs: IO port probe 0xc00-0xcf7: clean.
[  41.292687] cs: IO port probe 0xa00-0xaff: clean.
[  41.562205] lp0: using parport0 (interrupt-driven).
[  41.663025] Adding 1502036k swap on /dev/sda5.  Priority:-1 extents:1 across:1502036k
[  42.234897] EXT3 FS on sda1, internal journal
[  44.577578] No dock devices found.
[  46.096471] apm: BIOS not found.
[  47.920879] ppdev: user-space parallel port driver
[  48.491113] audit(1215451034.102:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5028 profile="/usr/sbin/cupsd" namespace="default"
[  49.915082] r8169: eth2: link down
[  49.945786] eth0: link up, 10Mbps, half-duplex, lpa 0x0000
[  50.096731] Bluetooth: Core ver 2.11
[  50.097709] NET: Registered protocol family 31
[  50.097715] Bluetooth: HCI device and connection manager initialized
[  50.097720] Bluetooth: HCI socket layer initialized
[  50.125504] Bluetooth: L2CAP ver 2.9
[  50.125511] Bluetooth: L2CAP socket layer initialized
[  50.206135] Bluetooth: RFCOMM socket layer initialized
[  50.206164] Bluetooth: RFCOMM TTY layer initialized
[  50.206166] Bluetooth: RFCOMM ver 1.8
[  53.146065] [drm] Initialized drm 1.1.0 20060810
[  53.236072] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[  53.236341] [drm] Initialized radeon 1.28.0 20060524 on minor 0
[  54.119289] NET: Registered protocol family 17
[  54.542253] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
[  54.542284] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
[  54.542364] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
[  55.908496] [drm] Setting GART location based on new memory map
[  55.908511] [drm] Loading R200 Microcode
[  55.908553] [drm] writeback test succeeded in 1 usecs
[  57.040712] NET: Registered protocol family 10
[  57.041138] lo: Disabled Privacy Extensions
[  57.042184] ADDRCONF(NETDEV_UP): eth2: link is not ready
[  57.486796] Inbound IN=eth0 OUT= MAC=00:0a:e4:45:2c:b3:00:09:7b:37:4f:bc:08:00 SRC=1.15.177.89 DST=37.8.182.82 LEN=52 TOS=0x00 PREC=0x00 TTL=119 ID=6634 DF PROTO=TCP SPT=1264 DPT=4662 WINDOW=65535 RES=0x00 SYN URGP=0
[  59.737800] Inbound IN=eth0 OUT= MAC=00:0a:e4:45:2c:b3:00:09:7b:37:9b:bc:08:00 SRC=39.1.206.121 DST=37.8.182.82 LEN=63 TOS=0x00 PREC=0x00 TTL=119 ID=34376 PROTO=UDP SPT=4672 DPT=4672 LEN=43
[  60.466231] Inbound IN=eth0 OUT= MAC=00:0a:e4:45:2c:b3:00:09:7b:37:4f:bc:08:00 SRC=1.15.177.89 DST=37.8.182.82 LEN=52 TOS=0x00 PREC=0x00 TTL=119 ID=6944 DF PROTO=TCP SPT=1264 DPT=4662 WINDOW=65535 RES=0x00 SYN URGP=0
[  66.393631] Inbound IN=eth0 OUT= MAC=00:0a:e4:45:2c:b3:00:09:7b:37:4f:bc:08:00 SRC=1.15.177.89 DST=37.8.182.82 LEN=52 TOS=0x00 PREC=0x00 TTL=119 ID=7369 DF PROTO=TCP SPT=1264 DPT=4662 WINDOW=65535 RES=0x00 SYN URGP=0
[  67.006597] Inbound IN=eth0 OUT= MAC=00:0a:e4:45:2c:b3:00:09:7b:37:4f:bc:08:00 SRC=1.36.86.91 DST=37.8.182.82 LEN=52 TOS=0x00 PREC=0x00 TTL=119 ID=38061 DF PROTO=TCP SPT=1359 DPT=4662 WINDOW=65535 RES=0x00 SYN URGP=0
[  67.174279] eth0: no IPv6 routers present
[  69.985903] Inbound IN=eth0 OUT= MAC=00:0a:e4:45:2c:b3:00:09:7b:37:4f:bc:08:00 SRC=1.36.86.91 DST=37.8.182.82 LEN=52 TOS=0x00 PREC=0x00 TTL=119 ID=38612 DF PROTO=TCP SPT=1359 DPT=4662 WINDOW=65535 RES=0x00 SYN URGP=0
[  76.039798] Inbound IN=eth0 OUT= MAC=00:0a:e4:45:2c:b3:00:09:7b:37:4f:bc:08:00 SRC=1.36.86.91 DST=37.8.182.82 LEN=52 TOS=0x00 PREC=0x00 TTL=119 ID=39540 DF PROTO=TCP SPT=1359 DPT=4662 WINDOW=65535 RES=0x00 SYN URGP=0
[  97.098589] Inbound IN=eth0 OUT= MAC=00:0a:e4:45:2c:b3:00:09:7b:37:9b:bc:08:00 SRC=23.252.19.215 DST=37.8.182.82 LEN=52 TOS=0x00 PREC=0x00 TTL=118 ID=43561 DF PROTO=TCP SPT=3898 DPT=4662 WINDOW=65535 RES=0x00 SYN URGP=0
[  100.222940] Inbound IN=eth0 OUT= MAC=00:0a:e4:45:2c:b3:00:09:7b:37:9b:bc:08:00 SRC=23.252.19.215 DST=37.8.182.82 LEN=52 TOS=0x00 PREC=0x00 TTL=118 ID=43936 DF PROTO=TCP SPT=3898 DPT=4662 WINDOW=65535 RES=0x00 SYN URGP=0
[  106.198333] Inbound IN=eth0 OUT= MAC=00:0a:e4:45:2c:b3:00:09:7b:37:9b:bc:08:00 SRC=23.252.19.215 DST=37.8.182.82 LEN=52 TOS=0x00 PREC=0x00 TTL=118 ID=44742 DF PROTO=TCP SPT=3898 DPT=4662 WINDOW=65535 RES=0x00 SYN URGP=0
[  130.469440] Inbound IN=eth0 OUT= MAC=00:0a:e4:45:2c:b3:00:09:7b:37:9b:bc:08:00 SRC=39.1.206.121 DST=37.8.182.82 LEN=50 TOS=0x00 PREC=0x00 TTL=119 ID=39385 PROTO=UDP SPT=4672 DPT=4672 LEN=30
[  145.854068] Inbound IN=eth0 OUT= MAC=00:0a:e4:45:2c:b3:00:09:7b:37:9b:bc:08:00 SRC=29.236.3.62 DST=37.8.182.82 LEN=50 TOS=0x00 PREC=0x00 TTL=118 ID=18773 PROTO=UDP SPT=4672 DPT=4672 LEN=30
[  146.855388] Inbound IN=eth0 OUT= MAC=00:0a:e4:45:2c:b3:00:09:7b:37:9b:bc:08:00 SRC=29.236.3.62 DST=37.8.182.82 LEN=55 TOS=0x00 PREC=0x00 TTL=118 ID=18772 PROTO=UDP SPT=4672 DPT=4672 LEN=35
[  150.412222] Inbound IN=eth0 OUT= MAC=00:0a:e4:45:2c:b3:00:09:7b:37:9b:bc:08:00 SRC=37.237.58.139 DST=37.8.182.82 LEN=52 TOS=0x00 PREC=0x00 TTL=119 ID=22136 DF PROTO=TCP SPT=1304 DPT=4662 WINDOW=65535 RES=0x00 SYN URGP=0
[  153.435439] Inbound IN=eth0 OUT= MAC=00:0a:e4:45:2c:b3:00:09:7b:37:9b:bc:08:00 SRC=37.237.58.139 DST=37.8.182.82 LEN=52 TOS=0x00 PREC=0x00 TTL=119 ID=22892 DF PROTO=TCP SPT=1304 DPT=4662 WINDOW=65535 RES=0x00 SYN URGP=0
[  159.326958] Inbound IN=eth0 OUT= MAC=00:0a:e4:45:2c:b3:00:09:7b:37:9b:bc:08:00 SRC=37.237.58.139 DST=37.8.182.82 LEN=52 TOS=0x00 PREC=0x00 TTL=119 ID=24434 DF PROTO=TCP SPT=1304 DPT=4662 WINDOW=65535 RES=0x00 SYN URGP=0
[  174.291022] Inbound IN=eth0 OUT= MAC=00:0a:e4:45:2c:b3:00:09:7b:37:4f:bc:08:00 SRC=1.29.80.202 DST=37.8.182.82 LEN=52 TOS=0x00 PREC=0x00 TTL=117 ID=62610 DF PROTO=TCP SPT=62893 DPT=4662 WINDOW=65535 RES=0x00 SYN URGP=0
[  177.193681] Inbound IN=eth0 OUT= MAC=00:0a:e4:45:2c:b3:00:09:7b:37:4f:bc:08:00 SRC=1.29.80.202 DST=37.8.182.82 LEN=52 TOS=0x00 PREC=0x00 TTL=117 ID=63407 DF PROTO=TCP SPT=62893 DPT=4662 WINDOW=65535 RES=0x00 SYN URGP=0
[  183.122545] Inbound IN=eth0 OUT= MAC=00:0a:e4:45:2c:b3:00:09:7b:37:4f:bc:08:00 SRC=1.29.80.202 DST=37.8.182.82 LEN=52 TOS=0x00 PREC=0x00 TTL=117 ID=65348 DF PROTO=TCP SPT=62893 DPT=4662 WINDOW=65535 RES=0x00 SYN URGP=0
[  226.438175] Inbound IN=eth0 OUT= MAC=00:0a:e4:45:2c:b3:00:09:7b:37:9b:bc:08:00 SRC=2.1.97.35 DST=37.8.182.82 LEN=63 TOS=0x00 PREC=0x00 TTL=119 ID=7411 PROTO=UDP SPT=4672 DPT=4672 LEN=43
[  243.921649] Inbound IN=eth0 OUT= MAC=00:0a:e4:45:2c:b3:00:09:7b:37:9b:bc:08:00 SRC=2.1.97.35 DST=37.8.182.82 LEN=50 TOS=0x00 PREC=0x00 TTL=119 ID=7420 PROTO=UDP SPT=4672 DPT=4672 LEN=30
[  299.933026] Inbound IN=eth0 OUT= MAC=00:0a:e4:45:2c:b3:00:09:7b:37:9b:bc:08:00 SRC=27.241.110.58 DST=37.8.182.82 LEN=52 TOS=0x00 PREC=0x00 TTL=117 ID=52281 DF PROTO=TCP SPT=3121 DPT=4662 WINDOW=65535 RES=0x00 SYN URGP=0
[  302.791707] Inbound IN=eth0 OUT= MAC=00:0a:e4:45:2c:b3:00:09:7b:37:9b:bc:08:00 SRC=27.241.110.58 DST=37.8.182.82 LEN=52 TOS=0x00 PREC=0x00 TTL=117 ID=52696 DF PROTO=TCP SPT=3121 DPT=4662 WINDOW=65535 RES=0x00 SYN URGP=0
[  308.751120] Inbound IN=eth0 OUT= MAC=00:0a:e4:45:2c:b3:00:09:7b:37:9b:bc:08:00 SRC=27.241.110.58 DST=37.8.182.82 LEN=52 TOS=0x00 PREC=0x00 TTL=117 ID=53524 DF PROTO=TCP SPT=3121 DPT=4662 WINDOW=65535 RES=0x00 SYN URGP=0
[  343.521263] Inbound IN=eth0 OUT= MAC=00:0a:e4:45:2c:b3:00:09:7b:37:4f:bc:08:00 SRC=23.251.202.75 DST=37.8.182.82 LEN=52 TOS=0x00 PREC=0x00 TTL=117 ID=35401 DF PROTO=TCP SPT=21844 DPT=4662 WINDOW=65535 RES=0x00 SYN URGP=0
[  346.526099] Inbound IN=eth0 OUT= MAC=00:0a:e4:45:2c:b3:00:09:7b:37:4f:bc:08:00 SRC=23.251.202.75 DST=37.8.182.82 LEN=52 TOS=0x00 PREC=0x00 TTL=117 ID=36450 DF PROTO=TCP SPT=21844 DPT=4662 WINDOW=65535 RES=0x00 SYN URGP=0
[  352.620557] Inbound IN=eth0 OUT= MAC=00:0a:e4:45:2c:b3:00:09:7b:37:4f:bc:08:00 SRC=23.251.202.75 DST=37.8.182.82 LEN=52 TOS=0x00 PREC=0x00 TTL=117 ID=38608 DF PROTO=TCP SPT=21844 DPT=4662 WINDOW=65535 RES=0x00 SYN URGP=0
[  389.645459] Inbound IN=eth0 OUT= MAC=00:0a:e4:45:2c:b3:00:09:7b:37:9b:bc:08:00 SRC=27.241.136.53 DST=37.8.182.82 LEN=52 TOS=0x00 PREC=0x00 TTL=117 ID=31784 DF PROTO=TCP SPT=2245 DPT=4662 WINDOW=65535 RES=0x00 SYN URGP=0
[  392.526442] Inbound IN=eth0 OUT= MAC=00:0a:e4:45:2c:b3:00:09:7b:37:9b:bc:08:00 SRC=27.241.136.53 DST=37.8.182.82 LEN=52 TOS=0x00 PREC=0x00 TTL=117 ID=32140 DF PROTO=TCP SPT=2245 DPT=4662 WINDOW=65535 RES=0x00 SYN URGP=0
[  398.464592] Inbound IN=eth0 OUT= MAC=00:0a:e4:45:2c:b3:00:09:7b:37:9b:bc:08:00 SRC=27.241.136.53 DST=37.8.182.82 LEN=52 TOS=0x00 PREC=0x00 TTL=117 ID=32910 DF PROTO=TCP SPT=2245 DPT=4662 WINDOW=65535 RES=0x00 SYN URGP=0
[  398.487456] Inbound IN=eth0 OUT= MAC=00:0a:e4:45:2c:b3:00:09:7b:37:4f:bc:08:00 SRC=36.243.76.185 DST=37.8.182.82 LEN=52 TOS=0x00 PREC=0x00 TTL=117 ID=32417 DF PROTO=TCP SPT=2129 DPT=4662 WINDOW=65535 RES=0x00 SYN URGP=0
[  401.536116] Inbound IN=eth0 OUT= MAC=00:0a:e4:45:2c:b3:00:09:7b:37:4f:bc:08:00 SRC=36.243.76.185 DST=37.8.182.82 LEN=52 TOS=0x00 PREC=0x00 TTL=117 ID=32803 DF PROTO=TCP SPT=2129 DPT=4662 WINDOW=65535 RES=0x00 SYN URGP=0
[  407.275358] Inbound IN=eth0 OUT= MAC=00:0a:e4:45:2c:b3:00:09:7b:37:4f:bc:08:00 SRC=36.243.76.185 DST=37.8.182.82 LEN=52 TOS=0x00 PREC=0x00 TTL=117 ID=33529 DF PROTO=TCP SPT=2129 DPT=4662 WINDOW=65535 RES=0x00 SYN URGP=0
[  429.736819] eth0: link down
[  521.391369] usb 4-1: new high speed USB device using ehci_hcd and address 2
[  521.524238] usb 4-1: configuration #1 chosen from 1 choice
[  521.752067] ieee80211_crypt: registered algorithm 'NULL'
[  521.768564] ieee80211: 802.11 data/management/control stack, git-1.1.13
[  521.768579] ieee80211: Copyright (C) 2004-2005 Intel Corporation
[  521.962704] usb 4-1: reset high speed USB device using ehci_hcd and address 2
[  522.097278] zd1211rw 4-1:1.0: eth1
[  522.097333] usbcore: registered new interface driver zd1211rw
[  522.386674] zd1211rw 4-1:1.0: firmware version 4725
[  522.426623] zd1211rw 4-1:1.0: zd1211b chip 0baf:0121 v4810 high 00-14-c1 AL2230_RF pa0 g--NS
[  522.453556] ADDRCONF(NETDEV_UP): eth1: link is not ready
[  530.964179] usb 2-1: new low speed USB device using ohci_hcd and address 2
[  531.177141] usb 2-1: configuration #1 chosen from 1 choice
[  531.435078] usbcore: registered new interface driver hiddev
[  531.440266] input: USB Optical Mouse USB Optical Mouse as /devices/pci0000:00/0000:00:03.1/usb2/2-1/2-1:1.0/input/input9
[  531.468137] input,hidraw0: USB HID v1.10 Mouse [USB Optical Mouse USB Optical Mouse] on usb-0000:00:03.1-1
[  531.468193] usbcore: registered new interface driver usbhid
[  531.468203] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[  535.244898] SoftMAC: Open Authentication completed with 00:14:c1:37:26:70
[  535.253648] ieee80211_crypt: registered algorithm 'WEP'
[  535.439781] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[  535.800791] SoftMAC: Open Authentication completed with 00:14:c1:37:26:70
[  535.830619] SoftMAC: Open Authentication completed with 00:14:c1:37:26:70
[  536.512412] SoftMAC: Open Authentication completed with 00:14:c1:37:26:70
[  536.534865] SoftMAC: Open Authentication completed with 00:14:c1:37:26:70
[  550.760635] eth1: no IPv6 routers present
[ 1315.938039] gnome-screensav[28271]: segfault at 00000200 eip b7fa9bad esp bfc3eb40 error 4
[ 4228.564169] gnome-screensav[12829]: segfault at 00000200 eip b7f68bad esp bfb85280 error 4
fedina@Acerino:~$
Flo
Prode Principiante
Messaggi: 30
Iscrizione: sabato 17 maggio 2008, 0:23

Re: pc card

Messaggio da Flo »

ragazzi spero di aver postato bene...  :-[
Flo
Prode Principiante
Messaggi: 30
Iscrizione: sabato 17 maggio 2008, 0:23

Re: pc card

Messaggio da Flo »

nessuno mi sa dare una dritta?
Scrivi risposta

Ritorna a “Driver e periferiche”

Chi c’è in linea

Visualizzano questa sezione: Google [Bot] e 5 ospiti