cups-pdf Hardy Heron

Installazione, configurazione e uso di programmi e strumenti.
Scrivi risposta
poccino
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 587
Iscrizione: mercoledì 11 luglio 2007, 19:21

cups-pdf Hardy Heron

Messaggio da poccino »

Vorrei sapere se esiste un how-to per l'installazione di cups-pdf su Hardy Heron.
In particolare, se si può cambiare la cartella di destinazione del file convertito in pdf.
Grazie
Avatar utente
ethyl
Rampante Reduce
Rampante Reduce
Messaggi: 7766
Iscrizione: venerdì 19 gennaio 2007, 16:31

Re: cups-pdf Hardy Heron

Messaggio da ethyl »

Codice: Seleziona tutto

sudo gedit /etc/cups/cups-pdf.conf
cerca Out ${HOME}/PDF e cambiala con la dir che ti pare.

Salva chiudi e riavvia cups

Codice: Seleziona tutto

sudo /etc/init.d/cupsys restart
e hai fatto  ;)
Avatar utente
hrs
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 584
Iscrizione: giovedì 27 ottobre 2005, 19:13

Re: cups-pdf Hardy Heron

Messaggio da hrs »

occhio, non so se HH ha lo stesso "bug" di GG ma forse è meglio se leggi questo topic

http://forum.ubuntu-it.org/viewtopic.ph ... 9#p1370819
una volta che "pinghi" fai tutto quello che vuoi!
poccino
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 587
Iscrizione: mercoledì 11 luglio 2007, 19:21

Re: cups-pdf Hardy Heron

Messaggio da poccino »

Grazie per l'attenzione.
ma come si installa cups-pdf su Hardy?
Avatar utente
ethyl
Rampante Reduce
Rampante Reduce
Messaggi: 7766
Iscrizione: venerdì 19 gennaio 2007, 16:31

Re: cups-pdf Hardy Heron

Messaggio da ethyl »

poccino
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 587
Iscrizione: mercoledì 11 luglio 2007, 19:21

Re: cups-pdf Hardy Heron

Messaggio da poccino »

grazie, ethyl, ma va bene anche per Hardy? a quella data non mi pare fosse ancora uscito.
Avatar utente
ethyl
Rampante Reduce
Rampante Reduce
Messaggi: 7766
Iscrizione: venerdì 19 gennaio 2007, 16:31

Re: cups-pdf Hardy Heron

Messaggio da ethyl »

la procedura è la stessa anche se ( quella postata ) non si riferisce ad hardy
poccino
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 587
Iscrizione: mercoledì 11 luglio 2007, 19:21

Re: cups-pdf Hardy Heron

Messaggio da poccino »

ok, grazie. Stasera provo tutto,
poccino
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 587
Iscrizione: mercoledì 11 luglio 2007, 19:21

Re: cups-pdf Hardy Heron

Messaggio da poccino »

sono andato in cups-pdf.conf e mi sono perso!

Ecco l'output:

#  cups-pdf.conf -- CUPS Backend Configuration (version 2.4.6, 2007-05-04)
#  18.09.2005, Volker C. Behr
#  Exp. Physik V, Uni Wuerzburg
vrbehr@cip.physik.uni-wuerzburg.de
http://cip.physik.uni-wuerzburg.de/~vrbehr/cups-pdf
#
#
#  This code may be freely distributed as long as this header
#  is preserved. Changes to the code should be clearly indicated. 
#
#  This code is distributed under the GPL.
#  (http://www.gnu.org/copyleft/gpl.html)
#
#  For more detailed licensing information see cups-pdf.c in the
#  corresponding version number.            

###########################################################################
#   #
# This is the configuration file for CUPS-PDF. Values that are not set in #
# here will use the defaults. Changes take effect immediately without the #
# need for restarting any services.   #
#   #
# Take care not to add whitespaces at the end of a line!   #
#   #
###########################################################################


###########################################################################
#   #
# Path Settings   #
#   #
###########################################################################

### Key: Out
##  CUPS-PDF output directory
##  special qualifiers:
##    ${HOME} will be expanded to the user's home directory
##    ${USER} will be expanded to the user name
##  in case it is an NFS export make sure it is exported without
##  root_squash!
### Default: /var/spool/cups-pdf/${USER}

Out ${HOME}/Desktop

### Key: AnonDirName
##  ABSOLUTE path for anonymously created PDF files
##  if anonymous access is disabled this setting has no effect
### Default: /var/spool/cups-pdf/ANONYMOUS

#AnonDirName /var/spool/cups-pdf/ANONYMOUS

### Key: Spool
##  CUPS-PDF spool directory - make sure there is no user 'SPOOL' on your
##  system or change the path
### Default: /var/spool/cups-pdf/SPOOL

#Spool /var/spool/cups-pdf/SPOOL


###########################################################################
#   #
# Filename Settings   #
#   #
###########################################################################

### Key: Cut
##  removing file name extensions before appending .pdf to output
##  extensions will only be removed if _both_ the following criteria are met:
##  - the extension (w/o the dot) is not longer than characters
##  - the remaining filename has a minimal length of 1 character
##  set Cut to -1 in order to disable cutting
##  recommended values: pure UNIX environment : -1
##                      mixed environments    :  3
### Default: 3

#Cut 3

### Key: Label
##  label all jobs with a unique job-id in order to avoid overwriting old
##  files in case new ones with identical names are created; always true for
##  untitled documents
##  0: label untitled documents only, 1: label all documents
### Default: 0

Label 0

### Key: TitlePref
##  where to look first for a title when creating the output filename
##  (title in PS file or title on commandline):
##  0: prefer title from %Title statement in the PS file
##  1: prefer title passed via commandline
### Default: 0

#TitlePref 0


###########################################################################
#   #
# User Settings   #
#   #
###########################################################################

### Key: AnonUser
##  user for anonymous PDF creation (this might be a security issue)
##  set this to an empty value to disable anonymous
### Default: nobody

#AnonUser nobody

### Key: LowerCase
##  This options allows to check user names given to CUPS-PDF additionally
##  against their lower case variants. This is necessary since in some
##  Windows environments only upper case user names are passed. Usually UNIX
##  user names are all lower case and it is save to use this option 
##  but be aware that it can lead to mis-identifications in case
##  you have user names that differ only in upper/lower case.
##    check only against user name as passed to CUPS  : 0
##    check additionally against lower case user name : 1
### Default: 1

#LowerCase 1

### Key: UserPrefix
##  some installations require a domain prefix added to the user name
##  leave empty for no prefix
### Default:

#UserPrefix

### Key: DirPrefix
##  if a prefix was defined above this switch toggels whether to include
##  the prefix in the output directory's name (if not $HOME) or not
##  0: do not include, 1: include
### Default: 0

#DirPrefix 0

### Key: RemovePrefix
##  some installation pass usernames with a prefix (usually a domain name)
##  if you do not want this prefix to be used by the ${USER} variable for
##  output directories put the part which is to be cut here
### Default:

#RemovePrefix


###########################################################################
#   #
# Security Settings   #
#   #
###########################################################################

### Key: AnonUMask
##  umask for anonymous output
##  these are the _inverse_ permissions to be granted
### Default: 0000

#AnonUMask 0000

### Key: UserUMask
##  umask for user output of known users
##  changing this can introduce security leaks if confidential
##  information is processed!
### Default: 0077

#UserUMask 0077

### Key: Grp
##  group cups-pdf is supposed to run as - this will also be the gid for all
##  created directories and log files
### Default: lp

Grp lpadmin

###########################################################################
#   #
# Log Settings   #
#   #
###########################################################################

### Key: Log
##  CUPS-PDF log directory
##  set this to an empty value to disable all logging
### Default: /var/log/cups

#Log /var/log/cups

### Key: LogType
##  log-mode
##  1: errors
##  2: status (i.e. activity)
##  4: debug - this will generate a lot of log-output!
##  add up values to combine options, i.e. 7 is full logging
##  if logging is disabled these setting have no effect
### Default: 3

LogType 1


###########################################################################
#   #
# PDF Conversion Settings   #
#   #
###########################################################################

### Key: GhostScript
##  location of GhostScript binary (gs)
##  MacOSX: for using pstopdf (recommended) set this to /usr/bin/pstopdf
##          or its proper location on your system
### Default: /usr/bin/gs

#GhostScript /usr/bin/gs

### Key: GSTmp
##  location of temporary files during GhostScript operation
##  this must be user-writable like /var/tmp or /tmp !
### Default: /var/tmp

#GSTmp /var/tmp

### Key: GSCall
## command line for calling GhostScript (!!! DO NOT USE NEWLINES !!!)
## MacOSX: for using pstopdf set this to %s %s -o %s %s
### Default: %s -q -dCompatibilityLevel=%s -dNOPAUSE -dBATCH -dSAFER -sDEVICE=pdfwrite -sOutputFile="%s" -dAutoRotatePages=/PageByPage -dAutoFilterColorImages=false -dColorImageFilter=/FlateEncode -dPDFSETTINGS=/prepress -c .setpdfwrite -f %s

#GSCall %s -q -dCompatibilityLevel=%s -dNOPAUSE -dBATCH -dSAFER -sDEVICE=pdfwrite -sOutputFile="%s" -dAutoRotatePages=/PageByPage -dAutoFilterColorImages=false -dColorImageFilter=/FlateEncode -dPDFSETTINGS=/prepress -c .setpdfwrite -f %s

### Key: PDFVer
##  PDF version to be created - can be "1.5", "1.4", "1.3" or "1.2"
##  MacOSX: for using pstopdf set this to an empty value
### Default: 1.4

#PDFVer 1.4

### Key: PostProcessing
##  postprocessing script that will be called after the creation of the PDF
##  as arguments the filename of the PDF and the username will be passed
##  the script will be called with user privileges
##  set this to an empty value to use no postprocessing
### Default:

#PostProcessing


###########################################################################
#                                                                        #
# Experimental Settings                                                  #
#  These settings activate experimental options. If you decide to use    #
#  them I would appreciate any feedback - including an 'ok' if they      #
#  work as expected - so I can eventually put them into the non-        #
#  experimental sections.   #
#                                                                        #
###########################################################################

### Key: DecodeHexStrings
##  this option will try to decode hex strings in the title to allow
##  internationalized titles
##  (have a look at contrib/pstitleconv for a suitable filter for data
##  from Windows clients)
##  0: disable, 1: enable
### Default: 0

#DecodeHexStrings 0
poccino
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 587
Iscrizione: mercoledì 11 luglio 2007, 19:21

Re: cups-pdf Hardy Heron

Messaggio da poccino »

RISOLTO
ho cambiato i permessi in apparmor.
Grazie a tutti.
Scrivi risposta

Ritorna a “Applicazioni”

Chi c’è in linea

Visualizzano questa sezione: Bing [Bot] e 5 ospiti