Hard Disk portatile non funziona!

[valerietto]

Ubuntu 8.04 non mi legge l hard disk portatile, Quando viene il messaggio di errrore ne compare un altro che dice apertura di western digital ma poi non succede niente e se ne chiudo uno si chiudono tutti e 2

[pieddu]

l'hai smontato malamente?
Fa uno scandisk da win se ce l'hai (win)....

[valerietto]

non ho windows...

[pieddu]

riesci a vedere i messaggi?
coCollega l'HD e digita

Codice: Seleziona tutto

dmesg

ed anche

Codice: Seleziona tutto

sudo fdisk -l

immediatamente dopo aver inserito l'HD....

[valerietto]

Codice: Seleziona tutto

[   14.735454] system 00:06: ioport range 0x1180-0x11bf has been reserved
[   14.735457] system 00:06: ioport range 0x1640-0x164f has been reserved
[   14.735462] system 00:07: ioport range 0x6a0-0x6af has been reserved
[   14.735465] system 00:07: ioport range 0x6b0-0x6ff has been reserved
[   14.735918] PCI: Failed to allocate mem resource #6:20000@d0000000 for 0000:01:00.0
[   14.735921] PCI: Bridge: 0000:00:01.0
[   14.735923]   IO window: 2000-2fff
[   14.735927]   MEM window: dc000000-ddffffff
[   14.735930]   PREFETCH window: c0000000-cfffffff
[   14.735933] PCI: Bridge: 0000:00:1c.0
[   14.735936]   IO window: 3000-3fff
[   14.735942]   MEM window: d8000000-d9ffffff
[   14.735946]   PREFETCH window: d2000000-d3ffffff
[   14.735952] PCI: Bridge: 0000:00:1c.1
[   14.735954]   IO window: 4000-4fff
[   14.735960]   MEM window: d6000000-d7ffffff
[   14.735964]   PREFETCH window: d0000000-d1ffffff
[   14.735970] PCI: Bridge: 0000:00:1c.2
[   14.735973]   IO window: 5000-5fff
[   14.735979]   MEM window: da000000-dbffffff
[   14.735983]   PREFETCH window: d4000000-d5ffffff
[   14.735989] PCI: Bridge: 0000:00:1e.0
[   14.735991]   IO window: disabled.
[   14.735996]   MEM window: de000000-de0fffff
[   14.736000]   PREFETCH window: disabled.
[   14.736018] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[   14.736023] PCI: Setting latency timer of device 0000:00:01.0 to 64
[   14.736047] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
[   14.736053] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[   14.736076] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16
[   14.736082] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[   14.736106] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
[   14.736111] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[   14.736122] PCI: Enabling device 0000:00:1e.0 (0004 -> 0006)
[   14.736129] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[   14.736139] NET: Registered protocol family 2
[   14.771424] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[   14.772151] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[   14.774941] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[   14.775773] TCP: Hash tables configured (established 262144 bind 65536)
[   14.775776] TCP reno registered
[   14.787487] checking if image is initramfs... it is
[   15.603213] Freeing initrd memory: 7551k freed
[   15.607486] Simple Boot Flag at 0x35 set to 0x1
[   15.608492] audit: initializing netlink socket (disabled)
[   15.608513] audit(1216647764.588:1): initialized
[   15.610978] VFS: Disk quotas dquot_6.5.1
[   15.611052] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[   15.611182] io scheduler noop registered
[   15.611184] io scheduler anticipatory registered
[   15.611186] io scheduler deadline registered
[   15.611308] io scheduler cfq registered (default)
[   15.612619] Boot video device is 0000:01:00.0
[   15.612798] PCI: Setting latency timer of device 0000:00:01.0 to 64
[   15.612835] assign_interrupt_mode Found MSI capability
[   15.612865] Allocate Port Service[0000:00:01.0:pcie00]
[   15.612953] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[   15.613012] assign_interrupt_mode Found MSI capability
[   15.613058] Allocate Port Service[0000:00:1c.0:pcie00]
[   15.613102] Allocate Port Service[0000:00:1c.0:pcie02]
[   15.613207] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[   15.613265] assign_interrupt_mode Found MSI capability
[   15.613311] Allocate Port Service[0000:00:1c.1:pcie00]
[   15.613350] Allocate Port Service[0000:00:1c.1:pcie02]
[   15.613455] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[   15.613513] assign_interrupt_mode Found MSI capability
[   15.613560] Allocate Port Service[0000:00:1c.2:pcie00]
[   15.613596] Allocate Port Service[0000:00:1c.2:pcie02]
[   15.642357] Real Time Clock Driver v1.12ac
[   15.642604] hpet_resources: 0xfed00000 is busy
[   15.642633] Linux agpgart interface v0.102
[   15.642635] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[   15.643887] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[   15.643961] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[   15.644068] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[   15.661672] serio: i8042 KBD port at 0x60,0x64 irq 1
[   15.661678] serio: i8042 AUX port at 0x60,0x64 irq 12
[   15.670325] mice: PS/2 mouse device common for all mice
[   15.670364] cpuidle: using governor ladder
[   15.670366] cpuidle: using governor menu
[   15.670515] NET: Registered protocol family 1
[   15.670622] registered taskstats version 1
[   15.670744]   Magic number: 0:646:736
[   15.670862] /build/buildd/linux-2.6.24/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[   15.670865] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[   15.670867] EDD information not available.
[   15.670875] Freeing unused kernel memory: 320k freed
[   15.687238] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[   16.871860] fuse init (API version 7.9)
[   16.890091] ACPI: SSDT 7FE7C11F, 01F6 (r1 HP     30BD         3000 INTL 20050624)
[   16.890329] ACPI: SSDT 7FE7BBD8, 04C2 (r1 HP     30BD         3001 INTL 20050624)
[   16.892399] Monitor-Mwait will be used to enter C-1 state
[   16.892402] Monitor-Mwait will be used to enter C-2 state
[   16.892404] Monitor-Mwait will be used to enter C-3 state
[   16.892542] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[   16.892546] ACPI: Processor [CPU0] (supports 8 throttling states)
[   16.892819] ACPI: SSDT 7FE7C315, 00C8 (r1 HP     30BD         3000 INTL 20050624)
[   16.893041] ACPI: SSDT 7FE7C09A, 0085 (r1 HP     30BD         3000 INTL 20050624)
[   16.893977] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[   16.893983] ACPI: Processor [CPU1] (supports 8 throttling states)
[   16.897838] ACPI: Thermal Zone [THR1] (13 C)
[   17.237694] usbcore: registered new interface driver usbfs
[   17.237718] usbcore: registered new interface driver hub
[   17.237851] usbcore: registered new device driver usb
[   17.256398] USB Universal Host Controller Interface driver v3.0
[   17.256467] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
[   17.256479] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[   17.256483] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[   17.256750] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[   17.256784] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001800
[   17.256916] usb usb1: configuration #1 chosen from 1 choice
[   17.256939] hub 1-0:1.0: USB hub found
[   17.256945] hub 1-0:1.0: 2 ports detected
[   17.258504] Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI
[   17.258508] Copyright (c) 1999-2006 Intel Corporation.
[   17.361146] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
[   17.361160] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[   17.361164] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[   17.361190] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[   17.361224] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001820
[   17.361337] usb usb2: configuration #1 chosen from 1 choice
[   17.361361] hub 2-0:1.0: USB hub found
[   17.361366] hub 2-0:1.0: 2 ports detected
[   17.361934] SCSI subsystem initialized
[   17.371033] libata version 3.00 loaded.
[   17.465019] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[   17.465034] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[   17.465038] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[   17.465063] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[   17.465097] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840
[   17.465212] usb usb3: configuration #1 chosen from 1 choice
[   17.465235] hub 3-0:1.0: USB hub found
[   17.465240] hub 3-0:1.0: 2 ports detected
[   17.568897] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
[   17.568910] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[   17.568914] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[   17.568939] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[   17.568974] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001860
[   17.569087] usb usb4: configuration #1 chosen from 1 choice
[   17.569110] hub 4-0:1.0: USB hub found
[   17.569115] hub 4-0:1.0: 2 ports detected
[   17.672818] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
[   17.673396] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[   17.673403] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[   17.673457] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[   17.677364] ehci_hcd 0000:00:1d.7: debug port 1
[   17.677371] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[   17.677379] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xde304000
[   17.703654] usb 2-1: new low speed USB device using uhci_hcd and address 2
[   17.715613] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   17.715754] usb usb5: configuration #1 chosen from 1 choice
[   17.715780] hub 5-0:1.0: USB hub found
[   17.715787] hub 5-0:1.0: 8 ports detected
[   17.792484] ahci 0000:00:1f.2: version 3.0
[   17.792523] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
[   17.793268] ahci 0000:00:1f.2: nr_ports (4) and implemented port map (0x5) don't match, using nr_ports
[   17.793272] ahci 0000:00:1f.2: forcing PORTS_IMPL to 0xf
[   17.820706] Clocksource tsc unstable (delta = -194791214 ns)
[   17.852422] usb 5-4: new high speed USB device using ehci_hcd and address 3
[   17.988192] usb 5-4: configuration #1 chosen from 1 choice
[   18.145090] usb 2-1: new low speed USB device using uhci_hcd and address 3
[   18.162473] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0xf impl SATA mode
[   18.162480] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part 
[   18.162487] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[   18.163431] scsi0 : ahci
[   18.163507] scsi1 : ahci
[   18.163565] scsi2 : ahci
[   18.163625] scsi3 : ahci
[   18.163711] ata1: SATA max UDMA/133 abar m1024@0xde304400 port 0xde304500 irq 507
[   18.163714] ata2: SATA max UDMA/133 abar m1024@0xde304400 port 0xde304580 irq 507
[   18.163717] ata3: SATA max UDMA/133 abar m1024@0xde304400 port 0xde304600 irq 507
[   18.163721] ata4: SATA max UDMA/133 abar m1024@0xde304400 port 0xde304680 irq 507
[   18.175044] usb 2-1: configuration #1 chosen from 1 choice
[   18.188698] usbcore: registered new interface driver hiddev
[   18.197385] input: Logitech USB RECEIVER as /devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1:1.0/input/input2
[   18.202582] input,hidraw0: USB HID v1.11 Mouse [Logitech USB RECEIVER] on usb-0000:00:1d.1-1
[   18.202607] usbcore: registered new interface driver usbhid
[   18.202612] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[   18.317778] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   18.318493] ata1.00: ATA-7: WDC WD1200BEVS-60LAT0, 01.06M01, max UDMA/100
[   18.318499] ata1.00: 234441648 sectors, multi 16: LBA48 
[   18.319281] ata1.00: configured for UDMA/100
[   18.350357] ata2: SATA link down (SStatus 0 SControl 0)
[   18.454376] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   18.455069] ata3.00: ATA-7: WDC WD1200BEVS-60LAT0, 01.06M01, max UDMA/100
[   18.455075] ata3.00: 234441648 sectors, multi 16: LBA48 
[   18.455866] ata3.00: configured for UDMA/100
[   18.491463] ata4: SATA link down (SStatus 0 SControl 0)
[   18.491648] scsi 0:0:0:0: Direct-Access     ATA      WDC WD1200BEVS-6 01.0 PQ: 0 ANSI: 5
[   18.491823] scsi 2:0:0:0: Direct-Access     ATA      WDC WD1200BEVS-6 01.0 PQ: 0 ANSI: 5
[   18.492420] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> IRQ 18
[   18.492437] PCI: Setting latency timer of device 0000:05:00.0 to 64
[   18.500054] Driver 'sd' needs updating - please use bus_type methods
[   18.504825] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
[   18.504846] sd 0:0:0:0: [sda] Write Protect is off
[   18.504850] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   18.504879] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   18.504956] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
[   18.504973] sd 0:0:0:0: [sda] Write Protect is off
[   18.504976] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   18.505004] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   18.505010]  sda:<6>e1000: 0000:05:00.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:16:36:fc:e9:fb
[   18.555557]  sda1 sda2 < sda5 >
[   18.584133] sd 0:0:0:0: [sda] Attached SCSI disk
[   18.584211] sd 2:0:0:0: [sdb] 234441648 512-byte hardware sectors (120034 MB)
[   18.584229] sd 2:0:0:0: [sdb] Write Protect is off
[   18.584233] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[   18.584260] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   18.584320] sd 2:0:0:0: [sdb] 234441648 512-byte hardware sectors (120034 MB)
[   18.584333] sd 2:0:0:0: [sdb] Write Protect is off
[   18.584335] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[   18.584358] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   18.584361]  sdb:<6>e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
[   18.605617] ata_piix 0000:00:1f.1: version 2.12
[   18.605636] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
[   18.605671] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[   18.606488] scsi4 : ata_piix
[   18.607027] scsi5 : ata_piix
[   18.607525] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1880 irq 14
[   18.607528] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1888 irq 15
[   18.672546]  sdb1 sdb2
[   18.672703] sd 2:0:0:0: [sdb] Attached SCSI disk
[   18.678302] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   18.678324] sd 2:0:0:0: Attached scsi generic sg1 type 0
[   18.924603] ata5.00: ATAPI: Optiarc DVD RW AD-7530A, EH31, max MWDMA2
[   18.929792] Attempting manual resume
[   18.929796] swsusp: Resume From Partition 8:5
[   18.929797] PM: Checking swsusp image.
[   18.929968] PM: Resume from disk failed.
[   18.976748] kjournald starting.  Commit interval 5 seconds
[   18.976783] EXT3-fs: mounted filesystem with ordered data mode.
[   19.096429] ata5.00: configured for MWDMA2
[   19.096482] ata6: port disabled. ignoring.
[   19.097891] scsi 4:0:0:0: CD-ROM            Optiarc  DVD RW AD-7530A  EH31 PQ: 0 ANSI: 5
[   19.098004] scsi 4:0:0:0: Attached scsi generic sg2 type 5
[   19.098094] ACPI: PCI Interrupt 0000:07:05.0[A] -> GSI 16 (level, low) -> IRQ 16
[   19.098106] PCI: Setting latency timer of device 0000:07:05.0 to 64
[   19.151232] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16]  MMIO=[de000000-de0007ff]  Max Packet=[2048]  IR/IT contexts=[4/4]
[   20.421203] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[009fc0005490f100]
[   31.833731] intel_rng: FWH not detected
[   31.858587] input: PC Speaker as /devices/platform/pcspkr/input/input3
[   31.970804] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   32.016306] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   32.123768] ACPI: Battery Slot [BAT0] (battery present)
[   32.125493] ACPI: AC Adapter [ACAD] (on-line)
[   32.142824] input: Power Button (FF) as /devices/virtual/input/input4
[   32.202023] ACPI: Power Button (FF) [PWRF]
[   32.202093] input: Power Button (CM) as /devices/virtual/input/input5
[   32.265936] ACPI: Power Button (CM) [PWRB]
[   32.266002] input: Sleep Button (CM) as /devices/virtual/input/input6
[   32.305944] ricoh-mmc: Ricoh MMC Controller disabling driver
[   32.305948] ricoh-mmc: Copyright(c) Philip Langdale
[   32.306001] ricoh-mmc: Ricoh MMC controller found at 0000:07:05.2 [1180:0843] (rev 1)
[   32.306015] ricoh-mmc: Controller is now disabled.
[   32.329859] ACPI: Sleep Button (CM) [SLPB]
[   32.329920] input: Lid Switch as /devices/virtual/input/input7
[   32.346096] ACPI: Lid Switch [LID]
[   32.346186] ACPI: WMI-Acer: Mapper loaded
[   32.435382] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input8
[   32.465750] iTCO_vendor_support: vendor-support=0
[   32.467854] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[   32.467940] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
[   32.467977] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   32.497692] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[   32.499369] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input9
[   32.561589] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   32.634993] sdhci: Secure Digital Host Controller Interface driver
[   32.634997] sdhci: Copyright(c) Pierre Ossman
[   32.635044] sdhci: SDHCI controller found at 0000:07:05.1 [1180:0822] (rev 19)
[   32.635063] PCI: Enabling device 0000:07:05.1 (0000 -> 0002)
[   32.635071] ACPI: PCI Interrupt 0000:07:05.1[B] -> GSI 17 (level, low) -> IRQ 17
[   32.635613] sdhci:slot0: Will use DMA mode even though HW doesn't fully claim to support it.
[   32.635625] PCI: Setting latency timer of device 0000:07:05.1 to 64
[   32.635705] mmc0: SDHCI at 0xde000800 irq 17 DMA
[   32.981979] nvidia: module license 'NVIDIA' taints kernel.
[   33.237546] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[   33.237556] PCI: Setting latency timer of device 0000:01:00.0 to 64
[   33.237675] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  169.12  Thu Feb 14 17:51:09 PST 2008
[   33.294065] Driver 'sr' needs updating - please use bus_type methods
[   33.308952] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[   33.308957] Uniform CD-ROM driver Revision: 3.20
[   33.309012] sr 4:0:0:0: Attached scsi CD-ROM sr0
[   33.352619] Linux video capture interface: v2.00
[   33.378906] usbcore: registered new interface driver lmpcm_usb
[   33.378911] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/misc/lmpcm_usb.c: v0.5.5:USB Logitech MediaPlay Cordless Mouse driver
[   33.404512] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1a0b1, caps: 0xa04713/0x200000
[   33.450740] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.0
[   33.450744] iwl3945: Copyright(c) 2003-2007 Intel Corporation
[   33.450854] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[   33.450870] PCI: Setting latency timer of device 0000:02:00.0 to 64
[   33.451418] iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection
[   33.456678] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:1810)
[   33.457066] uvcvideo: Failed to query (135) UVC control 1 (unit 0) : -32 (exp. 26).
[   33.457317] uvcvideo: Failed to query (129) UVC control 1 (unit 0) : -32 (exp. 26).
[   33.457320] uvcvideo: Failed to initialize the device (-5).
[   33.457341] usbcore: registered new interface driver uvcvideo
[   33.457344] USB Video Class driver (v0.1.0)
[   33.476338] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input10
[   33.692565] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
[   33.693121] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[   34.047618] iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels
[   34.048949] wmaster0: Selected rate control algorithm 'iwl-3945-rs'
[   34.426297] udev: renamed network interface wlan0 to eth1
[   34.448445] lp: driver loaded but no devices found
[   34.576503] Adding 4803392k swap on /dev/sda5.  Priority:-1 extents:1 across:4803392k
[   35.033636] EXT3 FS on sda1, internal journal
[   35.930707] ip_tables: (C) 2000-2006 Netfilter Core Team
[   36.457191] No dock devices found.
[   38.193058] ppdev: user-space parallel port driver
[   38.408040] audit(1216647790.718:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5254 profile="/usr/sbin/cupsd" namespace="default"
[   40.419436] e1000: eth0: e1000_watchdog: NIC Link is Up 10 Mbps Half Duplex, Flow Control: None
[   40.419446] e1000: eth0: e1000_watchdog: 10/100 speed: disabling TSO
[   40.554945] Bluetooth: Core ver 2.11
[   40.555077] NET: Registered protocol family 31
[   40.555080] Bluetooth: HCI device and connection manager initialized
[   40.555086] Bluetooth: HCI socket layer initialized
[   40.591378] Bluetooth: L2CAP ver 2.9
[   40.591386] Bluetooth: L2CAP socket layer initialized
[   40.707234] Bluetooth: RFCOMM socket layer initialized
[   40.707261] Bluetooth: RFCOMM TTY layer initialized
[   40.707264] Bluetooth: RFCOMM ver 1.8
[   43.055412] NET: Registered protocol family 17
[   49.657691] NET: Registered protocol family 10
[   49.658064] lo: Disabled Privacy Extensions
[   49.660712] ADDRCONF(NETDEV_UP): eth1: link is not ready
[   60.438649] eth0: no IPv6 routers present
[   82.072728] CPU0 attaching NULL sched-domain.
[   82.072734] CPU1 attaching NULL sched-domain.
[   82.078126] CPU0 attaching sched-domain:
[   82.078133]  domain 0: span 03
[   82.078137]   groups: 01 02
[   82.078142]   domain 1: span 03
[   82.078145]    groups: 03
[   82.078149] CPU1 attaching sched-domain:
[   82.078154]  domain 0: span 03
[   82.078157]   groups: 02 01
[   82.078164]   domain 1: span 03
[   82.078168]    groups: 03
[ 1144.187815] mmc0: new SD card at address 0002
[ 1144.258322] mmcblk0: mmc0:0002 00000 1993728KiB 
[ 1144.258383]  mmcblk0: p1
[ 1191.174569] mmc0: card 0002 removed
[ 1191.174731] mmcblk0: error -123 sending read/write command
[ 1191.174745] end_request: I/O error, dev mmcblk0, sector 736
[ 1191.174750] Buffer I/O error on device mmcblk0p1, logical block 489
[ 1191.174753] lost page write due to I/O error on mmcblk0p1
[ 1191.174776] mmcblk0: error -123 sending read/write command
[ 1191.174787] end_request: I/O error, dev mmcblk0, sector 738
[ 1191.174789] Buffer I/O error on device mmcblk0p1, logical block 491
[ 1191.174792] lost page write due to I/O error on mmcblk0p1
[ 1191.174796] end_request: I/O error, dev mmcblk0, sector 739
[ 1191.174799] Buffer I/O error on device mmcblk0p1, logical block 492
[ 1191.174802] lost page write due to I/O error on mmcblk0p1
[ 1191.174805] end_request: I/O error, dev mmcblk0, sector 740
[ 1191.174809] Buffer I/O error on device mmcblk0p1, logical block 493
[ 1191.174811] lost page write due to I/O error on mmcblk0p1
[ 1191.174815] end_request: I/O error, dev mmcblk0, sector 741
[ 1191.174818] Buffer I/O error on device mmcblk0p1, logical block 494
[ 1191.174820] lost page write due to I/O error on mmcblk0p1
[ 1191.174823] end_request: I/O error, dev mmcblk0, sector 742
[ 1191.174827] Buffer I/O error on device mmcblk0p1, logical block 495
[ 1191.174829] lost page write due to I/O error on mmcblk0p1
[ 1191.174848] mmcblk0: error -123 sending read/write command
[ 1191.174858] end_request: I/O error, dev mmcblk0, sector 744
[ 1191.174862] Buffer I/O error on device mmcblk0p1, logical block 497
[ 1191.174864] lost page write due to I/O error on mmcblk0p1
[ 1191.174885] mmcblk0: error -123 sending read/write command
[ 1191.174896] end_request: I/O error, dev mmcblk0, sector 746
[ 1191.174898] Buffer I/O error on device mmcblk0p1, logical block 499
[ 1191.174901] lost page write due to I/O error on mmcblk0p1
[ 1191.174905] end_request: I/O error, dev mmcblk0, sector 747
[ 1191.174908] Buffer I/O error on device mmcblk0p1, logical block 500
[ 1191.174911] lost page write due to I/O error on mmcblk0p1
[ 1191.174914] end_request: I/O error, dev mmcblk0, sector 748
[ 1191.174918] Buffer I/O error on device mmcblk0p1, logical block 501
[ 1191.174920] lost page write due to I/O error on mmcblk0p1
[ 1191.174924] end_request: I/O error, dev mmcblk0, sector 749
[ 1191.174928] end_request: I/O error, dev mmcblk0, sector 750
[ 1191.174932] end_request: I/O error, dev mmcblk0, sector 751
[ 1191.174936] end_request: I/O error, dev mmcblk0, sector 752
[ 1191.174940] end_request: I/O error, dev mmcblk0, sector 753
[ 1191.174943] end_request: I/O error, dev mmcblk0, sector 754
[ 1191.174946] end_request: I/O error, dev mmcblk0, sector 755
[ 1191.174950] end_request: I/O error, dev mmcblk0, sector 756
[ 1191.174965] mmcblk0: error -123 sending read/write command
[ 1191.174976] end_request: I/O error, dev mmcblk0, sector 1994304
[ 1191.174994] mmcblk0: error -123 sending read/write command
[ 1191.175006] end_request: I/O error, dev mmcblk0, sector 1994305
[ 1191.175010] end_request: I/O error, dev mmcblk0, sector 1994306
[ 1191.175013] end_request: I/O error, dev mmcblk0, sector 1994307
[ 1191.175017] end_request: I/O error, dev mmcblk0, sector 1994308
[ 1191.175020] end_request: I/O error, dev mmcblk0, sector 1994309
[ 1191.175024] end_request: I/O error, dev mmcblk0, sector 1994310
[ 1191.175028] end_request: I/O error, dev mmcblk0, sector 1994311
[ 1191.175032] end_request: I/O error, dev mmcblk0, sector 1994312
[ 1361.698238] mmc0: new SD card at address 0002
[ 1361.698400] mmcblk0: mmc0:0002 00000 1993728KiB 
[ 1361.698434]  mmcblk0: p1
[ 1595.290407] mmc0: card 0002 removed
valerio@Valerio-Computer:~$ sudo fdisk -l
[sudo] password for valerio: 

WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.


Disco /dev/sda: 120.0 GB, 120034123776 byte
255 heads, 63 sectors/track, 14593 cylinders
Units = cilindri of 16065 * 512 = 8225280 bytes
Disk identifier: 0x897b9461

Dispositivo Boot      Start         End      Blocks   Id  System
/dev/sda1   *           1       13995   112414806   83  Linux
/dev/sda2           13996       14593     4803435    5  Esteso
/dev/sda5           13996       14593     4803403+  82  Linux swap / Solaris

WARNING: GPT (GUID Partition Table) detected on '/dev/sdb'! The util fdisk doesn't support GPT. Use GNU Parted.


Disco /dev/sdb: 120.0 GB, 120034123776 byte
256 heads, 63 sectors/track, 14536 cylinders
Units = cilindri of 16128 * 512 = 8257536 bytes
Disk identifier: 0x00000000

Dispositivo Boot      Start         End      Blocks   Id  System
/dev/sdb1               1       14537   117220823+  ee  EFI GPT

[pieddu]

gpt? Che sarebbe? Uff... googlo...

[valerietto]

Mi aiutate!!! >:(

[bancaldo]

spero di non sviarti.
Non conosco il problema ma mi incuriosiva il fatto.
GPT è spiegato qui:
http://it.wikipedia.org/wiki/GUID_Partition_Table

Qui sembrano aver risolto installando gptsynch

Avevano un problema nella sincronizzazione della tabella GPT.

http://lostbob.wordpress.com/2008/04/25 ... t-fallito/

magari invece non ti serve a nulla.
Chissà?

[gianmpu]

Ci sono diversi I/O error. Probabilmente il file system è corrotto. Prova a dare il comando fsck /dev/sdb1 quando il disco è SMONTATO, ipotizzando che il disco esterno sia sdb e che ci sia su una sola partizione (altrimenti metti i parametri corretti).

Chiedo scusa non avevo letto fino in fondo.

[valerietto]

Scusate ma non trovo il programma gptsynch nel terminale o in sinaptyc.... per favore aiutatemi!

[gianmpu]

Nella guida che bancaldo ha postato c'è una lista di GUID per ogni coppia sistema operativo + tipo di partizione. Puoi provare a modificare a mano il file fstab inserendo una riga per l'hard disk esterno con il GUID adatto al tuo caso e poi prova a riavviare.

[valerietto]

Scusate l'ignoranza, ho linux ma non so qual'è la mia riga... :-[
dovrebbe essere questa E6D6D379-F507-44C2-A23C-238F2A3DF928
ma non so...
a e un altra cosa come apro il file fstab??
Scusate :-[

[gianmpu]

http://amperini.wordpress.com/2008/06/03/fstab-uuid-ed-udev/

Qui trovi una guida abbastanza utile con tutto ciò che ti serve. Per aprire fstab e poterlo modificare devi essere root, quindi usa il comando sudo gedit /etc/fstab. Non so come hai formattato il disco, quindi potrebbe essere quella o anche la data partition. Ma il disco è stato acquistato così o l'hai formattato tu? Eventualmente, come ULTIMA soluzione, puoi salvare i dati e formattarlo da win.

[valerietto]

ho aggiunto la riga  che ho postato sopra e ora non mi legge proprio l'hard disk  :'(
però se tolgo la riga me lo legge ma non lo monta... ora provo a seguire la guida...
l'hard disk l'ho acquistato in internet...
la guida non è che riesco a capirla bene perchè il mio dispositivo non ha una lettera... :-[