[Risolto] [Boot] Splash screen con scritte
-
Andryandrew
- Prode Principiante
- Messaggi: 247
- Iscrizione: mercoledì 3 settembre 2008, 14:49
[Risolto] [Boot] Splash screen con scritte
Ecco il problema... in pratica dopo l'installazione (partizione sistema in Ext3 e partizione home estesa in ReiserFS) quando avvio ubuntu ho lo Splash screen, ma una volta arrivato a circa 1/3 della barra, si ferma per qualche secondo, poi scompare e appaiono delle scritte (suppongo quindi che vada in modalità verbose)... le scritte rimangono ferme ancora qualche secondo, poi scorrono e il sistema si avvia...
Non è rallentato, è solo che mi piacerebbe avere lo splash screen... Qualche idea?
P.S. sarà l'ultima volta che scriverò su questo forum se non riceverò risposta... non avendo ricevuto risposta alle mie due precedenti discussioni
grazie in anticipo (sperèm)
Non è rallentato, è solo che mi piacerebbe avere lo splash screen... Qualche idea?
P.S. sarà l'ultima volta che scriverò su questo forum se non riceverò risposta... non avendo ricevuto risposta alle mie due precedenti discussioni
grazie in anticipo (sperèm)
Ultima modifica di Andryandrew il domenica 5 ottobre 2008, 12:50, modificato 1 volta in totale.
-Make me a sandwich. -What? Make it yourself!
-SUDO make me a sandwich -Ok.
-SUDO make me a sandwich -Ok.
Re: [Boot] Splash screen con scritte
Prova a riconfermare lo spash screen:
poi
(scegli l'opzione relativa allo splash screen che vuoi caricare, se + di una)sudo update-alternatives --config usplash-artwork.so
poi
Cmq ti ricordo che la comunità non è obbligata a rispondere. E' sempre una questione di cortesia. (yes)sudo update-initramfs -u
We all feed on tragedy It's like blood to a vampire Vicariously I live while the whole world dies Much better you than I
-
Andryandrew
- Prode Principiante
- Messaggi: 247
- Iscrizione: mercoledì 3 settembre 2008, 14:49
Re: [Boot] Splash screen con scritte
Si, hai ragione... quando ho scritto il post ero un po' incavolato perchè ho dovuto reinstallare ubuntu per la quarta volta e riscaricare tutti gli aggiornamenti... ::)Cmq ti ricordo che la comunità non è obbligata a rispondere. E' sempre una questione di cortesia. (yes)
Grazie comunque.. ora vedo se va
-Make me a sandwich. -What? Make it yourself!
-SUDO make me a sandwich -Ok.
-SUDO make me a sandwich -Ok.
-
Andryandrew
- Prode Principiante
- Messaggi: 247
- Iscrizione: mercoledì 3 settembre 2008, 14:49
Re: [Boot] Splash screen con scritte
Purtroppo il tuo metodo non risolve il problema... funziona bene, ma all'avvio compaiono le scritte come prima
-Make me a sandwich. -What? Make it yourself!
-SUDO make me a sandwich -Ok.
-SUDO make me a sandwich -Ok.
Re: [Boot] Splash screen con scritte
posta queste scritte
We all feed on tragedy It's like blood to a vampire Vicariously I live while the whole world dies Much better you than I
-
Andryandrew
- Prode Principiante
- Messaggi: 247
- Iscrizione: mercoledì 3 settembre 2008, 14:49
Re: [Boot] Splash screen con scritte
ok... riporto il messagio con dmesg
Codice: Seleziona tutto
[ 17.696697] EISA bus registered
[ 17.696704] ACPI: bus type pci registered
[ 17.721186] PCI: PCI BIOS revision 2.10 entry at 0xfb93c, last bus=3
[ 17.721189] PCI: Using configuration type 1
[ 17.721213] Setting up standard PCI resources
[ 17.729741] ACPI: EC: Look up EC in DSDT
[ 17.755384] ACPI: BIOS _OSI(Linux) query ignored via DMI
[ 17.765313] ACPI: Interpreter enabled
[ 17.765317] ACPI: (supports S0 S1 S3 S4 S5)
[ 17.765338] ACPI: Using IOAPIC for interrupt routing
[ 17.818631] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 17.819261] PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[ 17.819266] PCI quirk: region 0880-08bf claimed by ICH6 GPIO
[ 17.819989] PCI: Transparent bridge - 0000:00:1e.0
[ 17.820021] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 17.820797] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4._PRT]
[ 17.821309] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]
[ 17.821598] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[ 18.343299] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
[ 18.343759] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11 12 15)
[ 18.344177] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 15)
[ 18.344597] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *4 5 6 7 9 10 11 12 15)
[ 18.345053] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 9 10 11 12 15)
[ 18.345457] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 15)
[ 18.345889] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 15)
[ 18.346335] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 7 9 10 11 12 15)
[ 18.346651] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 18.346691] pnp: PnP ACPI init
[ 18.346700] ACPI: bus type pnp registered
[ 18.371936] pnpacpi: exceeded the max number of IO resources: 40
[ 18.372006] pnp: PnP ACPI: found 8 devices
[ 18.372008] ACPI: ACPI bus type pnp unregistered
[ 18.372013] PnPBIOS: Disabled by ACPI PNP
[ 18.372299] PCI: Using ACPI for IRQ routing
[ 18.372302] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 18.398160] NET: Registered protocol family 8
[ 18.398163] NET: Registered protocol family 20
[ 18.398204] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 18.398210] hpet0: 3 64-bit timers, 14318180 Hz
[ 18.399249] AppArmor: AppArmor Filesystem Enabled
[ 18.402143] Time: tsc clocksource has been installed.
[ 18.402158] Switched to high resolution mode on CPU 0
[ 18.402261] Switched to high resolution mode on CPU 1
[ 18.410102] system 00:01: ioport range 0x800-0x85f has been reserved
[ 18.410106] system 00:01: ioport range 0xc00-0xc7f has been reserved
[ 18.410109] system 00:01: ioport range 0x860-0x8ff could not be reserved
[ 18.410121] system 00:06: iomem range 0x0-0x9ffff could not be reserved
[ 18.410124] system 00:06: iomem range 0x100000-0xffffff could not be reserved
[ 18.410127] system 00:06: iomem range 0x1000000-0x1fe88bff could not be reserved
[ 18.410130] system 00:06: iomem range 0xf0000-0xfffff could not be reserved
[ 18.410133] system 00:06: iomem range 0xc0000-0xcffff could not be reserved
[ 18.410136] system 00:06: iomem range 0xfec00000-0xfecfffff could not be reserved
[ 18.410139] system 00:06: iomem range 0xfee00000-0xfeefffff could not be reserved
[ 18.410142] system 00:06: iomem range 0xfed20000-0xfed9ffff could not be reserved
[ 18.410145] system 00:06: iomem range 0xffb00000-0xffbfffff could not be reserved
[ 18.410148] system 00:06: iomem range 0xffc00000-0xffffffff could not be reserved
[ 18.410155] system 00:07: ioport range 0x100-0x1fe could not be reserved
[ 18.410158] system 00:07: ioport range 0x200-0x277 has been reserved
[ 18.410161] system 00:07: ioport range 0x280-0x2e7 has been reserved
[ 18.410163] system 00:07: ioport range 0x2e8-0x2ef has been reserved
[ 18.410166] system 00:07: ioport range 0x2f0-0x2f7 has been reserved
[ 18.410169] system 00:07: ioport range 0x2f8-0x2ff has been reserved
[ 18.410171] system 00:07: ioport range 0x300-0x377 could not be reserved
[ 18.410174] system 00:07: ioport range 0x380-0x3bb has been reserved
[ 18.410177] system 00:07: ioport range 0x3c0-0x3e7 could not be reserved
[ 18.410180] system 00:07: ioport range 0x3f6-0x3f7 could not be reserved
[ 18.410183] system 00:07: ioport range 0x400-0x4cf has been reserved
[ 18.410185] system 00:07: ioport range 0x4d2-0x57f has been reserved
[ 18.410188] system 00:07: ioport range 0x580-0x677 has been reserved
[ 18.410191] system 00:07: ioport range 0x680-0x777 has been reserved
[ 18.410193] system 00:07: ioport range 0x780-0x7bb has been reserved
[ 18.410196] system 00:07: ioport range 0x7c0-0x7ff has been reserved
[ 18.410199] system 00:07: ioport range 0x8e0-0x8ff has been reserved
[ 18.410201] system 00:07: ioport range 0x900-0x9fe has been reserved
[ 18.410204] system 00:07: ioport range 0xa00-0xafe has been reserved
[ 18.410207] system 00:07: ioport range 0xb00-0xbfe has been reserved
[ 18.410209] system 00:07: ioport range 0xc80-0xcaf has been reserved
[ 18.410212] system 00:07: ioport range 0xcb0-0xcbf has been reserved
[ 18.410215] system 00:07: ioport range 0xcc0-0xcf7 has been reserved
[ 18.410217] system 00:07: ioport range 0xd00-0xdfe has been reserved
[ 18.410220] system 00:07: ioport range 0xe00-0xefe has been reserved
[ 18.410223] system 00:07: ioport range 0xf00-0xffe has been reserved
[ 18.410226] system 00:07: ioport range 0x2000-0x20fe has been reserved
[ 18.410228] system 00:07: ioport range 0x2100-0x21fe has been reserved
[ 18.410231] system 00:07: ioport range 0x2200-0x22fe has been reserved
[ 18.410234] system 00:07: ioport range 0x2300-0x23fe has been reserved
[ 18.410237] system 00:07: ioport range 0x2400-0x24fe has been reserved
[ 18.410239] system 00:07: ioport range 0x2500-0x25fe has been reserved
[ 18.410242] system 00:07: ioport range 0x2600-0x26fe has been reserved
[ 18.410245] system 00:07: ioport range 0x2700-0x27fe has been reserved
[ 18.410248] system 00:07: ioport range 0x2800-0x28fe has been reserved
[ 18.410250] system 00:07: ioport range 0x2900-0x29fe has been reserved
[ 18.410253] system 00:07: ioport range 0x2a00-0x2afe has been reserved
[ 18.410256] system 00:07: ioport range 0x2b00-0x2bfe has been reserved
[ 18.410259] system 00:07: ioport range 0x2c00-0x2cfe has been reserved
[ 18.410262] system 00:07: ioport range 0x2d00-0x2dfe has been reserved
[ 18.410265] system 00:07: iomem range 0xf0000000-0xf3ffffff could not be reserved
[ 18.410268] system 00:07: iomem range 0xfeda0000-0xfedacfff has been reserved
[ 18.440753] PCI: Bridge: 0000:00:01.0
[ 18.440757] IO window: d000-dfff
[ 18.440762] MEM window: efd00000-efefffff
[ 18.440766] PREFETCH window: e0000000-e7ffffff
[ 18.440770] PCI: Bridge: 0000:00:1c.0
[ 18.440772] IO window: disabled.
[ 18.440777] MEM window: efc00000-efcfffff
[ 18.440781] PREFETCH window: disabled.
[ 18.440786] PCI: Bridge: 0000:00:1e.0
[ 18.440789] IO window: c000-cfff
[ 18.440794] MEM window: efb00000-efbfffff
[ 18.440798] PREFETCH window: disabled.
[ 18.440819] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 18.440825] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 18.440845] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 18.440851] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 18.440863] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 18.440876] NET: Registered protocol family 2
[ 18.478016] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 18.478291] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 18.478372] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 18.478450] TCP: Hash tables configured (established 16384 bind 16384)
[ 18.478453] TCP reno registered
[ 18.490068] checking if image is initramfs... it is
[ 19.105691] Freeing initrd memory: 7325k freed
[ 19.105833] Simple Boot Flag at 0x7a set to 0x1
[ 19.106645] audit: initializing netlink socket (disabled)
[ 19.106659] audit(1223150452.068:1): initialized
[ 19.109319] VFS: Disk quotas dquot_6.5.1
[ 19.109409] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 19.109559] io scheduler noop registered
[ 19.109562] io scheduler anticipatory registered
[ 19.109564] io scheduler deadline registered
[ 19.109577] io scheduler cfq registered (default)
[ 19.109668] Boot video device is 0000:01:00.0
[ 19.109676] PCI: Firmware left 0000:03:08.0 e100 interrupts enabled, disabling
[ 19.109810] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 19.109862] assign_interrupt_mode Found MSI capability
[ 19.109898] Allocate Port Service[0000:00:01.0:pcie00]
[ 19.109995] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 19.110041] assign_interrupt_mode Found MSI capability
[ 19.110079] Allocate Port Service[0000:00:1c.0:pcie00]
[ 19.110124] Allocate Port Service[0000:00:1c.0:pcie02]
[ 19.110444] isapnp: Scanning for PnP cards...
[ 19.461523] isapnp: No Plug & Play device found
[ 19.498866] Real Time Clock Driver v1.12ac
[ 19.498975] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 19.500616] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 19.500696] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 19.500879] PNP: No PS/2 controller found. Probing ports directly.
[ 19.503410] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 19.503417] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 19.516258] mice: PS/2 mouse device common for all mice
[ 19.516413] EISA: Probing bus 0 at eisa.0
[ 19.516417] EISA: Cannot allocate resource for mainboard
[ 19.516424] Cannot allocate resource for EISA slot 2
[ 19.516448] EISA: Detected 0 cards.
[ 19.516451] cpuidle: using governor ladder
[ 19.516453] cpuidle: using governor menu
[ 19.516539] NET: Registered protocol family 1
[ 19.516571] Using IPI No-Shortcut mode
[ 19.516603] registered taskstats version 1
[ 19.516715] Magic number: 12:407:42
[ 19.516721] hash matches device ttyeb
[ 19.516843] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 19.516845] EDD information not available.
[ 19.517056] Freeing unused kernel memory: 368k freed
[ 20.742650] fuse init (API version 7.9)
[ 20.763587] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
[ 20.763606] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
[ 21.061581] usbcore: registered new interface driver usbfs
[ 21.061609] usbcore: registered new interface driver hub
[ 21.066986] usbcore: registered new device driver usb
[ 21.069008] USB Universal Host Controller Interface driver v3.0
[ 21.069077] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 21 (level, low) -> IRQ 17
[ 21.069090] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 21.069095] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 21.069295] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 21.069326] uhci_hcd 0000:00:1d.0: irq 17, io base 0x0000ff80
[ 21.069498] usb usb1: configuration #1 chosen from 1 choice
[ 21.069528] hub 1-0:1.0: USB hub found
[ 21.069535] hub 1-0:1.0: 2 ports detected
[ 21.147230] e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
[ 21.147235] e100: Copyright(c) 1999-2006 Intel Corporation
[ 21.161594] SCSI subsystem initialized
[ 21.173366] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 22 (level, low) -> IRQ 18
[ 21.173381] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 21.173386] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 21.173414] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 21.173444] uhci_hcd 0000:00:1d.1: irq 18, io base 0x0000ff60
[ 21.173577] usb usb2: configuration #1 chosen from 1 choice
[ 21.173607] hub 2-0:1.0: USB hub found
[ 21.173614] hub 2-0:1.0: 2 ports detected
[ 21.176231] libata version 3.00 loaded.
[ 21.277193] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 19
[ 21.277208] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 21.277213] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 21.277243] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 21.277272] uhci_hcd 0000:00:1d.2: irq 19, io base 0x0000ff40
[ 21.277402] usb usb3: configuration #1 chosen from 1 choice
[ 21.277431] hub 3-0:1.0: USB hub found
[ 21.277438] hub 3-0:1.0: 2 ports detected
[ 21.381043] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 23 (level, low) -> IRQ 20
[ 21.381057] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 21.381061] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 21.381092] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 21.381120] uhci_hcd 0000:00:1d.3: irq 20, io base 0x0000ff20
[ 21.381248] usb usb4: configuration #1 chosen from 1 choice
[ 21.381278] hub 4-0:1.0: USB hub found
[ 21.381286] hub 4-0:1.0: 2 ports detected
[ 21.412880] usb 1-1: new low speed USB device using uhci_hcd and address 2
[ 21.484907] ACPI: PCI Interrupt 0000:03:08.0[A] -> GSI 20 (level, low) -> IRQ 21
[ 21.507249] e100: eth0: e100_probe: addr 0xefbef000, irq 21, MAC addr 00:13:72:e4:9c:58
[ 21.507353] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 21 (level, low) -> IRQ 17
[ 21.507368] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 21.507373] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 21.507423] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 21.511330] ehci_hcd 0000:00:1d.7: debug port 1
[ 21.511337] PCI: cache line size of 128 is not supported by device 0000:00:1d.7
[ 21.511345] ehci_hcd 0000:00:1d.7: irq 17, io mem 0xffa80800
[ 21.542262] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 21.542388] usb usb5: configuration #1 chosen from 1 choice
[ 21.542422] hub 5-0:1.0: USB hub found
[ 21.542430] hub 5-0:1.0: 8 ports detected
[ 21.644576] ata_piix 0000:00:1f.1: version 2.12
[ 21.644599] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16
[ 21.644639] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 21.645365] scsi0 : ata_piix
[ 21.645434] scsi1 : ata_piix
[ 21.645468] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 21.645472] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 21.935919] usb 1-1: device not accepting address 2, error -71
[ 21.968245] ata1.00: ATAPI: Optiarc DVD+/-RW ND-3570A, 104B, max UDMA/33
[ 22.135888] ata1.00: configured for UDMA/33
[ 22.135933] ata2: port disabled. ignoring.
[ 22.137044] scsi 0:0:0:0: CD-ROM Optiarc DVD+-RW ND-3570A 104B PQ: 0 ANSI: 5
[ 22.137129] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 22.291319] ACPI: PCI Interrupt 0000:00:1f.2[C] -> GSI 20 (level, low) -> IRQ 21
[ 22.291358] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 22.291401] scsi2 : ata_piix
[ 22.291461] scsi3 : ata_piix
[ 22.291498] ata3: SATA max UDMA/133 cmd 0xfe00 ctl 0xfe10 bmdma 0xfea0 irq 21
[ 22.291501] ata4: SATA max UDMA/133 cmd 0xfe20 ctl 0xfe30 bmdma 0xfea8 irq 21
[ 22.455323] ata3.00: ATA-7: SAMSUNG SP2504C, VT100-48, max UDMA7
[ 22.455327] ata3.00: 488281250 sectors, multi 8: LBA48 NCQ (depth 0/32)
[ 22.487276] ata3.00: configured for UDMA/133
[ 22.652934] scsi 2:0:0:0: Direct-Access ATA SAMSUNG SP2504C VT10 PQ: 0 ANSI: 5
[ 22.668984] Driver 'sd' needs updating - please use bus_type methods
[ 22.671094] sd 2:0:0:0: [sda] 488281250 512-byte hardware sectors (250000 MB)
[ 22.671112] sd 2:0:0:0: [sda] Write Protect is off
[ 22.671115] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 22.671141] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 22.671202] sd 2:0:0:0: [sda] 488281250 512-byte hardware sectors (250000 MB)
[ 22.671217] sd 2:0:0:0: [sda] Write Protect is off
[ 22.671220] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 22.671244] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 22.671248] sda:<4>Driver 'sr' needs updating - please use bus_type methods
[ 22.674079] sda1 sda2 sda4 <sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[ 22.675676] Uniform CD-ROM driver Revision: 3.20
[ 22.675725] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 22.689757] sda5 sda6 sda7 >
[ 22.709640] sd 2:0:0:0: [sda] Attached SCSI disk
[ 22.714576] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 22.714603] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 22.983098] usb 5-3: new high speed USB device using ehci_hcd and address 4
[ 23.056368] Attempting manual resume
[ 23.056372] swsusp: Resume From Partition 8:6
[ 23.056374] PM: Checking swsusp image.
[ 23.056570] PM: Resume from disk failed.
[ 23.103780] kjournald starting. Commit interval 5 seconds
[ 23.103795] EXT3-fs: mounted filesystem with ordered data mode.
[ 23.187608] usb 5-3: configuration #1 chosen from 1 choice
[ 23.425325] usb 1-1: new low speed USB device using uhci_hcd and address 4
[ 23.594116] usb 1-1: configuration #1 chosen from 1 choice
[ 23.832616] usb 1-2: new low speed USB device using uhci_hcd and address 5
[ 24.007417] usb 1-2: configuration #1 chosen from 1 choice
[ 25.174258] usb 4-2: new full speed USB device using uhci_hcd and address 2
[ 25.389021] usb 4-2: configuration #1 chosen from 1 choice
[ 28.761081] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 28.805101] input: PC Speaker as /devices/platform/pcspkr/input/input1
[ 28.845352] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 28.899068] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 28.940150] Linux agpgart interface v0.102
[ 28.991722] intel_rng: Firmware space is locked read-only. If you can't or
[ 28.991725] intel_rng: don't want to disable this in firmware setup, and if
[ 28.991727] intel_rng: you are certain that your system has a functional
[ 28.991728] intel_rng: RNG, try using the 'no_fwh_detect' option.
[ 29.152213] iTCO_vendor_support: vendor-support=0
[ 29.176373] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[ 29.176478] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0860)
[ 29.176519] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 29.207781] input: Power Button (FF) as /devices/virtual/input/input2
[ 33.561831] ACPI: Power Button (FF) [PWRF]
[ 33.561919] input: Power Button (CM) as /devices/virtual/input/input3
[ 33.623502] ACPI: Power Button (CM) [VBTN]
[ 33.870098] usbcore: registered new interface driver libusual
[ 33.884640] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 33.927981] [fglrx] Maximum main memory to use for locked dma buffers: 430 MBytes.
[ 33.928029] [fglrx] ASYNCIO init succeed!
[ 33.928781] [fglrx] PAT is enabled successfully!
[ 33.929135] [fglrx] module loaded - fglrx 8.47.3 [Feb 25 2008] on minor 0
[ 33.960969] usbcore: registered new interface driver hiddev
[ 33.967520] Initializing USB Mass Storage driver...
[ 33.969481] scsi4 : SCSI emulation for USB Mass Storage devices
[ 33.970558] usb-storage: device found at 4
[ 33.970561] usb-storage: waiting for device to settle before scanning
[ 33.973350] input: USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1:1.0/input/input4
[ 33.976713] Linux video capture interface: v2.00
[ 34.034816] input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1d.0-1
[ 34.049260] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.0/input/input5
[ 34.093713] input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.0-2
[ 34.093796] usbcore: registered new interface driver usbhid
[ 34.093801] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 34.096313] usb-storage: probe of 4-2:1.0 failed with error -5
[ 34.098132] usb-storage: probe of 4-2:1.1 failed with error -5
[ 34.111244] scsi7 : SCSI emulation for USB Mass Storage devices
[ 34.111604] usbcore: registered new interface driver usb-storage
[ 34.111609] USB Mass Storage support registered.
[ 34.111626] usbcore: registered new interface driver usbserial
[ 34.111670] /build/buildd/linux-2.6.24/drivers/usb/serial/usb-serial.c: USB Serial support registered for generic
[ 34.111713] usbcore: registered new interface driver usbserial_generic
[ 34.111716] /build/buildd/linux-2.6.24/drivers/usb/serial/usb-serial.c: USB Serial Driver core
[ 34.111779] usb-storage: device found at 2
[ 34.111781] usb-storage: waiting for device to settle before scanning
[ 34.154878] /build/buildd/linux-2.6.24/drivers/usb/serial/usb-serial.c: USB Serial support registered for GSM modem (1-port)
[ 34.154914] option 4-2:1.0: GSM modem (1-port) converter detected
[ 34.155074] usb 4-2: GSM modem (1-port) converter now attached to ttyUSB0
[ 34.155087] option 4-2:1.1: GSM modem (1-port) converter detected
[ 34.155174] usb 4-2: GSM modem (1-port) converter now attached to ttyUSB1
[ 34.155186] usbcore: registered new interface driver option
[ 34.155189] /build/buildd/linux-2.6.24/drivers/usb/serial/option.c: USB Driver for GSM modems: v0.7.1
[ 34.175657] /build/buildd/linux-2.6.24/drivers/usb/serial/usb-serial.c: USB Serial support registered for airprime
[ 34.175689] usbcore: registered new interface driver airprime
[ 34.241447] saa7130/34: v4l2 driver version 0.2.14 loaded
[ 34.241530] ACPI: PCI Interrupt 0000:03:02.0[A] -> GSI 18 (level, low) -> IRQ 19
[ 34.241540] saa7130[0]: found at 0000:03:02.0, rev: 1, irq: 19, latency: 64, mmio: 0xefbeec00
[ 34.241548] saa7130[0]: subsystem: 5168:0138, board: LifeView/Typhoon FlyVIDEO2000 [card=3,autodetected]
[ 34.241564] saa7130[0]: board init: gpio is 39100
[ 34.241567] saa7130[0]: there are different flyvideo cards with different tuners
[ 34.241568] saa7130[0]: out there, you might have to use the tuner=<nr> insmod
[ 34.241570] saa7130[0]: option to override the default value.
[ 34.241649] input: saa7134 IR (LifeView/Typhoon Fl as /devices/pci0000:00/0000:00:1e.0/0000:03:02.0/input/input6
[ 34.364213] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 34.364241] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 34.433034] saa7130[0]: i2c eeprom 00: 68 51 38 01 10 28 ff ff ff ff ff ff ff ff ff ff
[ 34.433046] saa7130[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 34.433058] saa7130[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 34.433069] saa7130[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 34.433079] saa7130[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 34.433090] saa7130[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 34.433101] saa7130[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 34.433112] saa7130[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 34.460984] tuner 0-0061: chip found @ 0xc2 (saa7130[0])
[ 34.461007] tuner-simple 0-0061: type set to 37 (LG PAL (newer TAPC series))
[ 34.461011] tuner 0-0061: type set to LG PAL (newer TAPC
[ 34.461014] tuner-simple 0-0061: type set to 37 (LG PAL (newer TAPC series))
[ 34.461017] tuner 0-0061: type set to LG PAL (newer TAPC
[ 34.468980] tuner 0-0063: chip found @ 0xc6 (saa7130[0])
[ 34.471123] saa7130[0]: registered device video0 [v4l2]
[ 34.471149] saa7130[0]: registered device vbi0
[ 34.471173] saa7130[0]: registered device radio0
[ 34.532407] saa7134 ALSA driver for DMA sound loaded
[ 34.532439] saa7130[0]/alsa: saa7130[0] at 0xefbeec00 irq 19 registered as card -2
[ 34.759416] lp: driver loaded but no devices found
[ 34.873035] Adding 2072344k swap on /dev/sda6. Priority:-1 extents:1 across:2072344k
[ 35.424456] EXT3 FS on sda2, internal journal
[ 38.963580] usb-storage: device scan complete
[ 38.968200] scsi 4:0:0:0: Direct-Access TEAC USB HS-CF Card 4.00 PQ: 0 ANSI: 0
[ 38.971562] scsi 4:0:0:1: Direct-Access TEAC USB HS-xD/SM 4.00 PQ: 0 ANSI: 0
[ 38.975182] scsi 4:0:0:2: Direct-Access TEAC USB HS-MS Card 4.00 PQ: 0 ANSI: 0
[ 38.978799] scsi 4:0:0:3: Direct-Access TEAC USB HS-SD Card 4.00 PQ: 0 ANSI: 0
[ 38.989333] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 38.989387] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 38.994071] sd 4:0:0:1: [sdc] Attached SCSI removable disk
[ 38.994117] sd 4:0:0:1: Attached scsi generic sg3 type 0
[ 38.999064] sd 4:0:0:2: [sdd] Attached SCSI removable disk
[ 38.999113] sd 4:0:0:2: Attached scsi generic sg4 type 0
[ 39.052112] sd 4:0:0:3: [sde] Attached SCSI removable disk
[ 39.052164] sd 4:0:0:3: Attached scsi generic sg5 type 0
[ 39.102295] usb-storage: device scan complete
[ 39.105737] scsi 7:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
[ 39.138239] sr1: scsi-1 drive
[ 39.138311] sr 7:0:0:0: Attached scsi CD-ROM sr1
[ 39.138364] sr 7:0:0:0: Attached scsi generic sg6 type 5
[ 53.632736] ReiserFS: sda7: found reiserfs format "3.6" with standard journal
[ 53.632748] ReiserFS: sda7: using ordered data mode
[ 53.639830] ReiserFS: sda7: journal params: device sda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 53.640250] ReiserFS: sda7: checking transaction log (sda7)
[ 53.648570] ReiserFS: sda7: Using r5 hash to sort names
[ 54.113165] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 54.537950] No dock devices found.
[ 55.600291] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 55.600297] apm: disabled - APM is not SMP safe.
[ 55.789763] ppdev: user-space parallel port driver
[ 55.895674] audit(1223143289.283:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5410 profile="/usr/sbin/cupsd" namespace="default"
[ 56.195766] NET: Registered protocol family 10
[ 56.196074] lo: Disabled Privacy Extensions
[ 57.227245] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 57.285342] Bluetooth: Core ver 2.11
[ 57.285438] NET: Registered protocol family 31
[ 57.285440] Bluetooth: HCI device and connection manager initialized
[ 57.285444] Bluetooth: HCI socket layer initialized
[ 57.303058] Bluetooth: L2CAP ver 2.9
[ 57.303065] Bluetooth: L2CAP socket layer initialized
[ 57.345104] Bluetooth: RFCOMM socket layer initialized
[ 57.345120] Bluetooth: RFCOMM TTY layer initialized
[ 57.345122] Bluetooth: RFCOMM ver 1.8
[ 59.019069] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 62.135791] [fglrx] Reserve Block - 0 offset = 0X0 length = 0X40000
[ 62.135798] [fglrx] Reserve Block - 1 offset = 0X7fff000 length = 0X1000
[ 62.135801] [fglrx] Reserve Block - 2 offset = 0X7fbf000 length = 0X40000
[ 62.318966] [fglrx] interrupt source 20008000 successfully enabled
[ 62.318973] [fglrx] enable ID = 0x00000004
[ 62.319343] [fglrx] Receive enable interrupt message with irqEnableMask: 20008000
[ 62.319603] [fglrx] interrupt source 10000000 successfully enabled
[ 62.319608] [fglrx] enable ID = 0x00000005
[ 62.319921] [fglrx] Receive enable interrupt message with irqEnableMask: 10000000
-Make me a sandwich. -What? Make it yourself!
-SUDO make me a sandwich -Ok.
-SUDO make me a sandwich -Ok.
Re: [Boot] Splash screen con scritte
Guarda, al posto tuo proverei a far così: scarica un nuovo splash screen sostituendolo a quello di default. Poi, se vedi che il problema non persiste, ripristini quello precedente.
Prova a scaricare questo splash:
http://gnome-look.org/content/download. ... n=52389232
Copia il file chrome-theme.so sul desktop, poi:
ctrl+alt+F7
Riavvia e vedi se il problema persiste.
Per rimettere il tema originario basta che rifai il procedimento dagli ultimi 3 quote scegliendo il tema di default di ubuntu.
Prova a scaricare questo splash:
http://gnome-look.org/content/download. ... n=52389232
Copia il file chrome-theme.so sul desktop, poi:
sudo cp chrome-theme.so /usr/lib/usplash
sudo update-alternatives --install /usr/lib/usplash/usplash-artwork.so usplash-artwork.so /usr/lib/usplash/chrome-theme.so 10
(scegli il valore riferito a chrome-theme.so)sudo update-alternatives --config usplash-artwork.so
Per provare lo splash:sudo update-initramfs -u
Per tornare indietro da tale visualizzazione:sudo usplash -c
ctrl+alt+F7
Riavvia e vedi se il problema persiste.
Per rimettere il tema originario basta che rifai il procedimento dagli ultimi 3 quote scegliendo il tema di default di ubuntu.
Ultima modifica di stefo85 il sabato 4 ottobre 2008, 21:30, modificato 1 volta in totale.
We all feed on tragedy It's like blood to a vampire Vicariously I live while the whole world dies Much better you than I
-
Andryandrew
- Prode Principiante
- Messaggi: 247
- Iscrizione: mercoledì 3 settembre 2008, 14:49
Re: [Boot] Splash screen con scritte
niente da fare... però forse ho capito... credo di avere una partizione /home (ReiserFS) troppo grande: quando fa il checkdisk ci mette troppo e ubuntu fa vedere le scritte credendo che sia un errore... infatti il tempo in cui il processo si ferma è:
[ 39.105737] scsi 7:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
[ 39.138239] sr1: scsi-1 drive
[ 39.138311] sr 7:0:0:0: Attached scsi CD-ROM sr1
[ 39.138364] sr 7:0:0:0: Attached scsi generic sg6 type 5
[ 53.632736] ReiserFS: sda7: found reiserfs format "3.6" with standard journal
[ 53.632748] ReiserFS: sda7: using ordered data mode
[ 53.639830] ReiserFS: sda7: journal params: device sda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 53.640250] ReiserFS: sda7: checking transaction log (sda7)
[ 53.648570] ReiserFS: sda7: Using r5 hash to sort names
[ 54.113165] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 54.537950] No dock devices found.
[ 55.600291] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 55.600297] apm: disabled - APM is not SMP safe.
[ 55.789763] ppdev: user-space parallel port driver
-Make me a sandwich. -What? Make it yourself!
-SUDO make me a sandwich -Ok.
-SUDO make me a sandwich -Ok.
-
Andryandrew
- Prode Principiante
- Messaggi: 247
- Iscrizione: mercoledì 3 settembre 2008, 14:49
Re: [Risolto] [Boot] Splash screen con scritte
Allora... alla fine sono ruscito... In pratica ubuntu ci metteva troppo a fare fsck del disco /home (che avevo partizionato in ReiserFS ed era 180 gigabyte), quindi dopo 10 secondi di attesa lo splash si disattivava e comparivano le scritte della verbose mode, probabilmente perchè ubuntu lo fa automaticamente (per eventuali debug nel caso l'attesa sia provocata da un errore).
Per risolvere questo problema ci sono 3 metodi:
1) diminuire la grandezza dela partizione (ho fatto così...)
2) modificare /etc/fstab e disabilitare il controllo del disco lento (impostando 0 al valore "pass"); questo velocizza moltissimo il boot ma è insicuro se ubuntu viene ripristinato dopo un crash di sistema (frequenti a chi, come me, ha poca RAM)... in alternativa è possibile inserire il controllo del disco all'avvio di GNOME, aggiungendolo in "sessioni"
3) trovare da qualche parte (se esiste) la chiave di configurazione che imposta il tempo massimo dopo il quale lo splash screen viene sostituito dalle scritte... Questa sarebbe la soluzione migliore, ma non ho idea di come attuarla
Se ho scritto boiate ditemelo (molto probabile)
Per risolvere questo problema ci sono 3 metodi:
1) diminuire la grandezza dela partizione (ho fatto così...)
2) modificare /etc/fstab e disabilitare il controllo del disco lento (impostando 0 al valore "pass"); questo velocizza moltissimo il boot ma è insicuro se ubuntu viene ripristinato dopo un crash di sistema (frequenti a chi, come me, ha poca RAM)... in alternativa è possibile inserire il controllo del disco all'avvio di GNOME, aggiungendolo in "sessioni"
3) trovare da qualche parte (se esiste) la chiave di configurazione che imposta il tempo massimo dopo il quale lo splash screen viene sostituito dalle scritte... Questa sarebbe la soluzione migliore, ma non ho idea di come attuarla
Se ho scritto boiate ditemelo (molto probabile)
-Make me a sandwich. -What? Make it yourself!
-SUDO make me a sandwich -Ok.
-SUDO make me a sandwich -Ok.
Re: [Risolto] [Boot] Splash screen con scritte
Scusa ma il file system check ti parte ad ogni avvio? Dovrebbe essere periodico. Quanto ti ci mette a partire ubuntu?
Cmq dubito fortemente che dipenda dalla dimensione di una partizione. Al limite, il fatto di dover fare il check ad ogni avvio, fa scadere un timer per lo spalsh screen.
Io credo dipenda dalla formattazione della partizione in ReiserFS che tra l'altro dovrebbe dare meno noie in quanto a frequenza di check e lunghezza dei controlli. Gli altri dischi sono partizionati ext2-3 per caso? Forze è questa incongruenza tra dischi dello stesso s.o. a dare noie.
Cmq, questo indipendentemente dal tipo di attività che compie all'avvio, lo splash screen ha un timer. Oltre entra in verbose mode. Se si digita da terminale:
update-alternatives --help
si nota che c'è un opzione "priority" che è di default a 10 e indica: "an integer; options with higher numbers have higher priority in automatic mode". Dal quartultimo quote che ti ho lasciato si vede tale impostazione. Prova ad aumentare quella. Ma, come ti dicevo, questo sarebbe solo un tappabuchi.
Il problema vero per me è la formattazione scelta e il conseguente fsck ad ogni avvio.
Ciao
Cmq dubito fortemente che dipenda dalla dimensione di una partizione. Al limite, il fatto di dover fare il check ad ogni avvio, fa scadere un timer per lo spalsh screen.
Io credo dipenda dalla formattazione della partizione in ReiserFS che tra l'altro dovrebbe dare meno noie in quanto a frequenza di check e lunghezza dei controlli. Gli altri dischi sono partizionati ext2-3 per caso? Forze è questa incongruenza tra dischi dello stesso s.o. a dare noie.
Cmq, questo indipendentemente dal tipo di attività che compie all'avvio, lo splash screen ha un timer. Oltre entra in verbose mode. Se si digita da terminale:
update-alternatives --help
si nota che c'è un opzione "priority" che è di default a 10 e indica: "an integer; options with higher numbers have higher priority in automatic mode". Dal quartultimo quote che ti ho lasciato si vede tale impostazione. Prova ad aumentare quella. Ma, come ti dicevo, questo sarebbe solo un tappabuchi.
Il problema vero per me è la formattazione scelta e il conseguente fsck ad ogni avvio.
Ciao
We all feed on tragedy It's like blood to a vampire Vicariously I live while the whole world dies Much better you than I
-
Andryandrew
- Prode Principiante
- Messaggi: 247
- Iscrizione: mercoledì 3 settembre 2008, 14:49
Re: [Risolto] [Boot] Splash screen con scritte
ok... Comunque dopo aver diminuito la grandezza della partizione non mi fa più questo errore... credo che lascerò così...stefo85 ha scritto: Scusa ma il file system check ti parte ad ogni avvio? Dovrebbe essere periodico. Quanto ti ci mette a partire ubuntu?
Cmq dubito fortemente che dipenda dalla dimensione di una partizione. Al limite, il fatto di dover fare il check ad ogni avvio, fa scadere un timer per lo spalsh screen.
Io credo dipenda dalla formattazione della partizione in ReiserFS che tra l'altro dovrebbe dare meno noie in quanto a frequenza di check e lunghezza dei controlli. Gli altri dischi sono partizionati ext2-3 per caso? Forze è questa incongruenza tra dischi dello stesso s.o. a dare noie.
Cmq, questo indipendentemente dal tipo di attività che compie all'avvio, lo splash screen ha un timer. Oltre entra in verbose mode. Se si digita da terminale:
update-alternatives --help
si nota che c'è un opzione "priority" che è di default a 10 e indica: "an integer; options with higher numbers have higher priority in automatic mode". Dal quartultimo quote che ti ho lasciato si vede tale impostazione. Prova ad aumentare quella. Ma, come ti dicevo, questo sarebbe solo un tappabuchi.
Il problema vero per me è la formattazione scelta e il conseguente fsck ad ogni avvio.
Ciao
-Make me a sandwich. -What? Make it yourself!
-SUDO make me a sandwich -Ok.
-SUDO make me a sandwich -Ok.
Chi c’è in linea
Visualizzano questa sezione: Google [Bot] e 7 ospiti
