problemi con aggionrnamento a kubuntu 8.10

[kumagic]

Salve a tutti
ho effettuato l'aggiornamento da kubuntu 8.4 a 8.10 ma alla fine dopo il riavvio ci sono i seguenti problemi
1) mi sono ritrovato con una risoluzione dello schermo gigantesca che pur cambiandola si ripresenta al successivo riavvio.
2)  problema molto fastidioso, dopo aver caricato il sistema operativo cioè fatto il login caricato desktop ecc ecc... appena digito un tasto dalla tastiera lo schermo diventa nero per 1 secondo e poi torna normale finchè non premo nuovamente un tasto oppure muovo il mouse, in pratica se digito o se sposto il cursore col mouse il display diventa tutto nero se non digito e non sposto il mouse il display si visualizza normale.
Qualcuno sa come risolvere questi problemi?
Grazie

P.S. la mia scheda video è sis650_740

[metrofox]

Posta il tuo xorg.conf:

Codice: Seleziona tutto

kedit /etc/X11/xorg.conf

Comunque, ti consiglio di reinstallare TUTTO kubuntu direttamente scaricando la iso del CD

[kumagic]

# xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#  sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
EndSection

# commented out by update-manager, HAL is now used
#Section "InputDevice"
# Identifier "Generic Keyboard"
# Driver "kbd"
# Option "CoreKeyboard"
# Option "XkbRules" "xorg"
# Option "XkbModel" "pc105"
# Option "XkbLayout" "it"
#EndSection

# commented out by update-manager, HAL is now used
#Section "InputDevice"
# Identifier "Configured Mouse"
# Driver "mouse"
# Option "CorePointer"
# Option "Device" "/dev/input/mice"
# Option "Protocol" "ImPS/2"
# Option "ZAxisMapping" "4 5"
# Option "Emulate3Buttons" "true"
#EndSection

# commented out by update-manager, HAL is now used
#Section "InputDevice"
# Driver "wacom"
# Identifier "stylus"
# Option "Device" "/dev/input/wacom"
# Option "Type" "stylus"
# Option "ForceDevice" "ISDV4"# Tablet PC ONLY
#EndSection

# commented out by update-manager, HAL is now used
#Section "InputDevice"
# Driver "wacom"
# Identifier "eraser"
# Option "Device" "/dev/input/wacom"
# Option "Type" "eraser"
# Option "ForceDevice" "ISDV4"# Tablet PC ONLY
#EndSection

# commented out by update-manager, HAL is now used
#Section "InputDevice"
# Driver "wacom"
# Identifier "cursor"
# Option "Device" "/dev/input/wacom"
# Option "Type" "cursor"
# Option "ForceDevice" "ISDV4"# Tablet PC ONLY
#EndSection

Section "Device"
Identifier "Silicon Integrated Systems [SiS] 65x/M650/740 PCI/AGP VGA Display Adapter"
Boardname "sis"
Busid "PCI:1:0:0"
Driver "sis"
Screen 0
  Option "EnableSiSCtrl" "yes"
EndSection

Section "Monitor"
Identifier "BenQ FP71G"
Modelname "Custom 1"
  modeline  "640x480@60" 25.2 640 656 752 800 480 490 492 525 -vsync -hsync
  modeline  "640x480@72" 31.5 640 664 704 832 480 489 491 520 -vsync -hsync
  modeline  "640x480@75" 31.5 640 656 720 840 480 481 484 500 -vsync -hsync
  modeline  "800x600@56" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
  modeline  "800x600@72" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
  modeline  "800x600@75" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
  modeline  "800x600@60" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
  modeline  "832x624@75" 57.284 832 864 928 1152 624 625 628 667 -vsync -hsync
  modeline  "1024x768@75" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
  modeline  "1024x768@70" 75.0 1024 1048 1184 1328 768 771 777 806 -vsync -hsync
  modeline  "1024x768@60" 65.0 1024 1048 1184 1344 768 771 777 806 -vsync -hsync
  modeline  "1152x864@75" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
  modeline  "1280x1024@75" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
  modeline  "1280x960@60" 102.1 1280 1360 1496 1712 960 961 964 994 -hsync +vsync
  modeline  "1280x1024@60" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
  modeline  "1280x960@75" 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync
  modeline  "1400x1050@60" 122.61 1400 1488 1640 1880 1050 1051 1054 1087 -hsync +vsync
  modeline  "1400x1050@75" 155.85 1400 1496 1648 1896 1050 1051 1054 1096 -hsync +vsync
  modeline  "1600x1200@65" 175.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
  modeline  "1600x1200@60" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
  modeline  "1792x1344@60" 204.8 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync
Gamma 1.0
EndSection

Section "Screen"
Identifier "Default Screen"
Device "Silicon Integrated Systems [SiS] 65x/M650/740 PCI/AGP VGA Display Adapter"
Monitor "BenQ FP71G"
Defaultdepth 24
SubSection "Display"
Depth 24
Virtual 1792 1344
Modes "1024x768@60" "1152x864@75" "1024x768@70" "1280x1024@75" "1024x768@75" "1280x960@60" "832x624@75" "1280x1024@60" "800x600@60" "1280x960@75" "800x600@75" "1400x1050@60" "800x600@72" "1400x1050@75" "800x600@56" "1600x1200@65" "640x480@75" "1600x1200@60" "640x480@72" "1792x1344@60" "640x480@60"
EndSubSection
EndSection

Section "ServerLayout"
Identifier "Default Layout"
  screen 0 "Default Screen" 0 0
# commented out by update-manager, HAL is now used
# Inputdevice "Generic Keyboard"
# commented out by update-manager, HAL is now used
# Inputdevice "Configured Mouse"

# Uncomment if you have a wacom tablet
# InputDevice    "stylus" "SendCoreEvents"
# InputDevice    "cursor" "SendCoreEvents"
# InputDevice    "eraser" "SendCoreEvents"
EndSection
Section "Module"
Load "glx"
Load "GLcore"
Load "v4l"
EndSection
Section "ServerFlags"
EndSection

[metrofox]

Io direi di:

Codice: Seleziona tutto

sudo dpkg-reconfigure -phigh xserver-xorg

Prova con questo comando che ti rigenera lo xorg.conf, al massimo si vede...Poi.

PS. Ti darà alcune domande, rispondi se puoi, sono facilissime

[kumagic]

Fatto!
ho risolto il problema n 1 ovvero la risoluzione si è stabilizzata e riconfermata al riavvio successivo,
ma il problema n 2 rimane tale e quale, ovvero ogni volta che premo un tasto o muovo il mouse lo schermo diventa nero per 1 secondo. :'(

P.S. ho provato la live cd  K 8.10 alla fine del caricamento appare schermo nero con una riga orizzontale "multicolor"
ho provato la live da DVD  k 8.10  stesso problema descritto  al punto 2 ovvero schermo nero ogni volta che premo un tasto o muovo il mouse :'(

Help help

[metrofox]

Che tastiera e mouse hai? Puoi ripostare il tuo xorg.conf?

[kumagic]

la mia tastiera è: xtecnologies ps/2 127 tasti
il mio mouse è: olidada optical 3d mouse ps/2

il mio nuovo xorg.conf è:

# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# Note that some configuration settings that could be done previously
# in this file, now are automatically configured by the server and settings
# here are ignored.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#  sudo dpkg-reconfigure -phigh xserver-xorg

Section "Device"
Identifier "Configured Video Device"
EndSection

Section "Monitor"
Identifier "Configured Monitor"
EndSection

Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
Device "Configured Video Device"
EndSection