mmm un come si fa mi copre di insulti? :-\Janvitus ha scritto: Mmm... magari controlla che il kernel ti carichi tutti e 2 i moduli delle schede all'avvio.
Codice: Seleziona tutto
Module Size Used by
rfcomm 45600 0
l2cap 30464 5 rfcomm
bluetooth 59268 4 rfcomm,l2cap
ppdev 11400 0
powernow_k8 12992 0
cpufreq_userspace 9184 1
cpufreq_stats 8264 0
freq_table 6464 2 powernow_k8,cpufreq_stats
cpufreq_powersave 3328 0
cpufreq_ondemand 9768 0
cpufreq_conservative 10984 0
video 18824 0
tc1100_wmi 9096 0
sony_acpi 7188 0
pcc_acpi 16128 0
hotkey 13768 0
dev_acpi 15364 0
container 6272 0
button 8864 0
acpi_sbs 24600 0
battery 12296 1 acpi_sbs
ac 7176 1 acpi_sbs
i2c_acpi_ec 7040 1 acpi_sbs
nls_utf8 3584 4
ntfs 101376 4
dm_mod 63176 1
md_mod 76792 0
sr_mod 19748 0
sbp2 28420 0
parport_pc 40944 0
lp 15040 0
parport 44172 3 ppdev,parport_pc,lp
snd_intel8x0 38440 1
snd_ac97_codec 110268 1 snd_intel8x0
snd_ac97_bus 4096 1 snd_ac97_codec
snd_usb_audio 92672 1
snd_usb_lib 19456 1 snd_usb_audio
snd_pcm_oss 59424 0
snd_mixer_oss 20608 1 snd_pcm_oss
snd_hwdep 12960 1 snd_usb_audio
nvidia 5427128 12
snd_pcm 104712 4 snd_intel8x0,snd_ac97_codec,snd_usb_audio,snd_pcm_oss
snd_mpu401 9608 0
snd_mpu401_uart 10368 1 snd_mpu401
snd_rawmidi 31648 2 snd_usb_lib,snd_mpu401_uart
snd_seq_device 11280 1 snd_rawmidi
snd_timer 29064 1 snd_pcm
snd 68576 16 snd_intel8x0,snd_ac97_codec,snd_usb_audio,snd_pcm_oss,snd_mixer_oss,snd_hwdep,snd_pcm,snd_mpu401,snd_mpu401_uart,snd_rawmidi,snd_seq_device,snd_timer
tsdev 10240 0
ipv6 300416 10
analog 13024 0
floppy 74120 0
soundcore 13216 1 snd
shpchp 51360 0
pci_hotplug 33168 1 shpchp
gameport 19216 1 analog
snd_page_alloc 13968 2 snd_intel8x0,snd_pcm
rtc 16760 0
pcspkr 3592 0
psmouse 40452 0
serio_raw 9732 0
i2c_nforce2 9216 0
i2c_core 26624 3 i2c_acpi_ec,nvidia,i2c_nforce2
evdev 14464 2
sg 43568 0
ext3 145936 3
jbd 70952 1 ext3
usbhid 42912 0
ide_generic 2816 0
forcedeth 27908 0
ehci_hcd 34568 0
ohci1394 37452 0
ieee1394 369688 2 sbp2,ohci1394
ohci_hcd 23684 0
usbcore 145980 6 snd_usb_audio,snd_usb_lib,usbhid,ehci_hcd,ohci_hcd
ide_cd 35744 0
cdrom 41144 2 sr_mod,ide_cd
ide_disk 19456 4
generic 7300 0
sd_mod 21504 8
amd74xx 16944 0 [permanent]
sata_nv 12420 15
libata 86048 1 sata_nv
scsi_mod 160504 5 sr_mod,sbp2,sg,sd_mod,libata
thermal 16524 0
processor 29224 2 powernow_k8,thermal
fan 6408 0
capability 7176 0
commoncap 9728 1 capability
vga16fb 15120 1
cfbcopyarea 5120 1 vga16fb
vgastate 10368 1 vga16fb
cfbimgblt 4224 1 vga16fb
cfbfillrect 5760 1 vga16fb
fbcon 43136 72
tileblit 4096 1 fbcon
font 9984 1 fbcon
bitblit 7424 1 fbcon
softcursor 3712 1 bitblitCodice: Seleziona tutto
Module Size Used by
snd_usb_audio 92672 0
snd_usb_lib 19456 1 snd_usb_audio
usbhid 42912 0
snd_hwdep 12960 1 snd_usb_audio
rfcomm 45600 0
l2cap 30464 5 rfcomm
bluetooth 59268 4 rfcomm,l2cap
ppdev 11400 0
powernow_k8 12992 0
cpufreq_userspace 9184 1
cpufreq_stats 8264 0
freq_table 6464 2 powernow_k8,cpufreq_stats
cpufreq_powersave 3328 0
cpufreq_ondemand 9768 0
cpufreq_conservative 10984 0
video 18824 0
tc1100_wmi 9096 0
sony_acpi 7188 0
pcc_acpi 16128 0
hotkey 13768 0
dev_acpi 15364 0
container 6272 0
button 8864 0
acpi_sbs 24600 0
battery 12296 1 acpi_sbs
ac 7176 1 acpi_sbs
i2c_acpi_ec 7040 1 acpi_sbs
nls_utf8 3584 4
ntfs 101376 4
dm_mod 63176 1
md_mod 76792 0
sr_mod 19748 0
sbp2 28420 0
parport_pc 40944 0
lp 15040 0
parport 44172 3 ppdev,parport_pc,lp
snd_intel8x0 38440 1
snd_ac97_codec 110268 1 snd_intel8x0
snd_ac97_bus 4096 1 snd_ac97_codec
snd_pcm_oss 59424 0
snd_mixer_oss 20608 1 snd_pcm_oss
nvidia 5427128 12
tsdev 10240 0
snd_pcm 104712 4 snd_usb_audio,snd_intel8x0,snd_ac97_codec,snd_pcm_oss
snd_timer 29064 1 snd_pcm
analog 13024 0
ipv6 300416 10
floppy 74120 0
snd_mpu401 9608 0
snd_mpu401_uart 10368 1 snd_mpu401
snd_rawmidi 31648 2 snd_usb_lib,snd_mpu401_uart
snd_seq_device 11280 1 snd_rawmidi
gameport 19216 1 analog
shpchp 51360 0
pci_hotplug 33168 1 shpchp
rtc 16760 0
snd_page_alloc 13968 2 snd_intel8x0,snd_pcm
snd 68576 14 snd_usb_audio,snd_hwdep,snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer,snd_mpu401,snd_mpu401_uart,snd_rawmidi,snd_seq_device
soundcore 13216 1 snd
pcspkr 3592 0
psmouse 40452 0
serio_raw 9732 0
i2c_nforce2 9216 0
i2c_core 26624 3 i2c_acpi_ec,nvidia,i2c_nforce2
evdev 14464 2
sg 43568 0
ext3 145936 3
jbd 70952 1 ext3
ide_generic 2816 0
ohci1394 37452 0
ieee1394 369688 2 sbp2,ohci1394
forcedeth 27908 0
ehci_hcd 34568 0
ohci_hcd 23684 0
usbcore 145980 6 snd_usb_audio,snd_usb_lib,usbhid,ehci_hcd,ohci_hcd
ide_cd 35744 0
cdrom 41144 2 sr_mod,ide_cd
ide_disk 19456 4
generic 7300 0
sd_mod 21504 8
amd74xx 16944 0 [permanent]
sata_nv 12420 15
libata 86048 1 sata_nv
scsi_mod 160504 5 sr_mod,sbp2,sg,sd_mod,libata
thermal 16524 0
processor 29224 2 powernow_k8,thermal
fan 6408 0
capability 7176 0
commoncap 9728 1 capability
vga16fb 15120 1
cfbcopyarea 5120 1 vga16fb
vgastate 10368 1 vga16fb
cfbimgblt 4224 1 vga16fb
cfbfillrect 5760 1 vga16fb
fbcon 43136 72
tileblit 4096 1 fbcon
font 9984 1 fbcon
bitblit 7424 1 fbcon
softcursor 3712 1 bitblit Codice: Seleziona tutto
[ 0.000000] Bootdata ok (command line is root=/dev/sda3 ro quiet splash)
[ 0.000000] Linux version 2.6.15-23-amd64-generic (buildd@yellow) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 SMP PREEMPT Thu May 18 16:39:23 UTC 2006
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003ffc0000 (usable)
[ 0.000000] BIOS-e820: 000000003ffc0000 - 000000003ffd0000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003ffd0000 - 0000000040000000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff7c0000 - 0000000100000000 (reserved)
[ 0.000000] ACPI: RSDP (v000 ACPIAM ) @ 0x00000000000f9cb0
[ 0.000000] ACPI: RSDT (v001 A M I OEMRSDT 0x07000501 MSFT 0x00000097) @ 0x000000003ffc0000
[ 0.000000] ACPI: FADT (v002 A M I OEMFACP 0x07000501 MSFT 0x00000097) @ 0x000000003ffc0200
[ 0.000000] ACPI: MADT (v001 A M I OEMAPIC 0x07000501 MSFT 0x00000097) @ 0x000000003ffc0390
[ 0.000000] ACPI: OEMB (v001 A M I OEMBIOS 0x07000501 MSFT 0x00000097) @ 0x000000003ffd0040
[ 0.000000] ACPI: DSDT (v001 A0055 A0055003 0x00000003 INTL 0x02002026) @ 0x0000000000000000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] Number of nodes 1
[ 0.000000] Node 0 MemBase 0000000000000000 Limit 000000003ffc0000
[ 0.000000] Using 63 for the hash shift.
[ 0.000000] Using node hash shift of 63
[ 0.000000] Bootmem setup node 0 0000000000000000-000000003ffc0000
[ 0.000000] On node 0 totalpages: 257478
[ 0.000000] DMA zone: 3021 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 254457 pages, LIFO batch:31
[ 0.000000] Normal zone: 0 pages, LIFO batch:0
[ 0.000000] HighMem zone: 0 pages, LIFO batch:0
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:12 APIC version 16
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored.
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Setting APIC routing to physical flat
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
[ 0.000000] Checking aperture...
[ 0.000000] CPU 0: aperture @ f0000000 size 128 MB
[ 0.000000] SMP: Allowing 3 CPUs, 2 hotplug CPUs
[ 0.000000] Built 1 zonelists
[ 0.000000] Kernel command line: root=/dev/sda3 ro quiet splash
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 131072 bytes)
[ 0.000000] time.c: Using 3.579545 MHz PM timer.
[ 0.000000] time.c: Detected 2420.140 MHz processor.
[ 14.219579] Console: colour VGA+ 80x25
[ 14.220506] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 14.221870] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 14.234891] Memory: 1020996k/1048320k available (2133k kernel code, 26936k reserved, 752k data, 180k init)
[ 14.294899] Calibrating delay using timer specific routine.. 4843.43 BogoMIPS (lpj=2421718)
[ 14.294951] Security Framework v1.0.0 initialized
[ 14.294957] SELinux: Disabled at boot.
[ 14.294978] Mount-cache hash table entries: 256
[ 14.295086] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 14.295088] CPU: L2 Cache: 512K (64 bytes/line)
[ 14.295090] CPU 0(1) -> Node 0 -> Core 0
[ 14.295099] mtrr: v2.0 (20020519)
[ 14.295106] SMP alternatives: switching to UP code
[ 14.295421] checking if image is initramfs... it is
[ 14.763772] Freeing initrd memory: 7098k freed
[ 14.770611] ACPI: Looking for DSDT ... not found!
[ 14.782426] Using local APIC timer interrupts.
[ 14.823737] Detected 13.750 MHz APIC timer.
[ 14.823801] Brought up 1 CPUs
[ 14.823829] time.c: Using PIT/TSC based timekeeping.
[ 14.823831] testing NMI watchdog ... OK.
[ 14.834097] NET: Registered protocol family 16
[ 14.834121] ACPI: bus type pci registered
[ 14.834128] PCI: Using configuration type 1
[ 14.834573] ACPI: Subsystem revision 20051216
[ 14.837921] ACPI: Interpreter enabled
[ 14.837923] ACPI: Using IOAPIC for interrupt routing
[ 14.838620] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 14.838622] PCI: Probing PCI hardware (bus 00)
[ 14.841641] Boot video device is 0000:01:00.0
[ 14.841765] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 14.851496] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 14.851749] ACPI: Power Resource [ISAV] (on)
[ 14.852620] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
[ 14.852937] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *11
[ 14.853242] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
[ 14.853549] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[ 14.853858] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *11
[ 14.854164] ACPI: PCI Interrupt Link [LUS0] (IRQs 20 21 22) *7
[ 14.854469] ACPI: PCI Interrupt Link [LUS1] (IRQs 20 21 22) *9
[ 14.854787] ACPI: PCI Interrupt Link [LUS2] (IRQs 20 21 22) *10
[ 14.855086] ACPI: PCI Interrupt Link [LKLN] (IRQs 20 21 22) *11
[ 14.855389] ACPI: PCI Interrupt Link [LAUI] (IRQs 20 21 22) *9
[ 14.855694] ACPI: PCI Interrupt Link [LKMO] (IRQs 20 21 22) *0, disabled.
[ 14.855998] ACPI: PCI Interrupt Link [LKSM] (IRQs 20 21 22) *0, disabled.
[ 14.856299] ACPI: PCI Interrupt Link [LTID] (IRQs 20 21 22) *0
[ 14.856611] ACPI: PCI Interrupt Link [LTIE] (IRQs 20 21 22) *0, disabled.
[ 14.856973] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22) *14
[ 14.857036] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 14.857043] pnp: PnP ACPI init
[ 14.861732] pnp: PnP ACPI: found 15 devices
[ 14.861746] PCI: Using ACPI for IRQ routing
[ 14.861749] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 14.861836] agpgart: Detected AGP bridge 0
[ 14.861841] agpgart: Setting up Nforce3 AGP.
[ 14.865757] agpgart: AGP aperture is 128M @ 0xf0000000
[ 14.865775] PCI-DMA: Disabling IOMMU.
[ 14.866439] pnp: 00:0a: ioport range 0x480-0x487 has been reserved
[ 14.866441] pnp: 00:0a: ioport range 0xd00-0xd07 has been reserved
[ 14.866573] PCI: Bridge: 0000:00:0b.0
[ 14.866574] IO window: disabled.
[ 14.866578] MEM window: fa900000-fe9fffff
[ 14.866581] PREFETCH window: ca800000-ea7fffff
[ 14.866585] PCI: Bridge: 0000:00:0e.0
[ 14.866587] IO window: b000-bfff
[ 14.866589] MEM window: fea00000-feafffff
[ 14.866591] PREFETCH window: disabled.
[ 14.866600] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[ 14.866771] IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
[ 14.866986] audit: initializing netlink socket (disabled)
[ 14.866997] audit(1148245973.648:1): initialized
[ 14.867107] VFS: Disk quotas dquot_6.5.1
[ 14.867122] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 14.867165] Initializing Cryptographic API
[ 14.867168] io scheduler noop registered
[ 14.867174] io scheduler anticipatory registered
[ 14.867179] io scheduler deadline registered
[ 14.867193] io scheduler cfq registered
[ 14.877588] Linux agpgart interface v0.101 (c) Dave Jones
[ 14.877674] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 14.879215] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 14.879351] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 14.879377] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
[ 14.879471] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 14.879554] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 14.880848] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 14.880959] 00:0d: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 14.881275] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 14.881313] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 14.881317] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 14.881448] mice: PS/2 mouse device common for all mice
[ 14.881776] NET: Registered protocol family 2
[ 14.890790] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 14.891121] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
[ 14.892995] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 14.893927] TCP: Hash tables configured (established 131072 bind 65536)
[ 14.893930] TCP reno registered
[ 14.894026] TCP bic registered
[ 14.894033] NET: Registered protocol family 1
[ 14.894040] NET: Registered protocol family 8
[ 14.894042] NET: Registered protocol family 20
[ 14.894188] ACPI wakeup devices:
[ 14.894190] PS2K PS2M UAR1 UAR2 USB0 MAC USB1 USB2 P0P1
[ 14.894195] ACPI: (supports S0 S1 S3 S4 S5)
[ 14.894246] Freeing unused kernel memory: 180k freed
[ 14.910527] input: AT Translated Set 2 keyboard as /class/input/input0
[ 14.925951] vga16fb: initializing
[ 14.925955] vga16fb: mapped to 0xffff8100000a0000
[ 15.112810] Console: switching to colour frame buffer device 80x25
[ 15.112815] fb0: VGA16 VGA frame buffer device
[ 16.197126] Capability LSM initialized
[ 16.847192] SCSI subsystem initialized
[ 16.848842] ACPI: bus type scsi registered
[ 16.848845] libata version 1.20 loaded.
[ 16.850276] sata_nv 0000:00:0a.0: version 0.8
[ 16.850669] ACPI: PCI Interrupt Link [LTID] BIOS reported IRQ 0, using IRQ 22
[ 16.850672] ACPI: PCI Interrupt Link [LTID] enabled at IRQ 22
[ 16.850677] GSI 16 sharing vector 0xB1 and IRQ 16
[ 16.850682] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LTID] -> GSI 22 (level, low) -> IRQ 177
[ 16.850695] PCI: Setting latency timer of device 0000:00:0a.0 to 64
[ 16.850749] ata1: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xC800 irq 177
[ 16.850768] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xC808 irq 177
[ 17.205063] ata1: dev 0 cfg 00:0040 49:2f00 82:7c6b 83:7f09 84:4063 85:7c69 86:3e01 87:4063 88:407f 93:0000
[ 17.205068] ata1: dev 0 ATA-7, max UDMA/133, 398297088 sectors: LBA48
[ 17.205403] sata_get_dev_handle: SATA dev addr=0xa0000, handle=0xffff810037fde340
[ 17.211175] nv_sata: Primary device added
[ 17.211177] nv_sata: Primary device removed
[ 17.211179] nv_sata: Secondary device added
[ 17.211180] nv_sata: Secondary device removed
[ 17.211183] ata1: dev 0 configured for UDMA/133
[ 17.211454] sata_get_dev_handle: SATA dev addr=0xa0000, handle=0xffff810037fde340
[ 17.216285] scsi0 : sata_nv
[ 17.571943] ata2: dev 0 cfg 00:0040 49:2f00 82:7c6b 83:7f09 84:4063 85:7c69 86:3e01 87:4063 88:407f 93:0000
[ 17.571948] ata2: dev 0 ATA-7, max UDMA/133, 398297088 sectors: LBA48
[ 17.572275] sata_get_dev_handle: SATA dev addr=0xa0000, handle=0xffff810037fde340
[ 17.578044] ata2: dev 0 configured for UDMA/133
[ 17.578313] sata_get_dev_handle: SATA dev addr=0xa0000, handle=0xffff810037fde340
[ 17.583148] scsi1 : sata_nv
[ 17.583831] Vendor: ATA Model: Maxtor 6B200M0 Rev: BANC
[ 17.583845] Type: Direct-Access ANSI SCSI revision: 05
[ 17.584851] Vendor: ATA Model: Maxtor 6B200M0 Rev: BANC
[ 17.584859] Type: Direct-Access ANSI SCSI revision: 05
[ 17.586535] NFORCE3-250: IDE controller at PCI slot 0000:00:08.0
[ 17.586637] NFORCE3-250: chipset revision 162
[ 17.586638] NFORCE3-250: not 100% native mode: will probe irqs later
[ 17.586642] NFORCE3-250: BIOS didn't set cable bits correctly. Enabling workaround.
[ 17.586645] NFORCE3-250: 0000:00:08.0 (rev a2) UDMA133 controller
[ 17.586655] ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA
[ 17.586664] ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio
[ 17.586671] Probing IDE interface ide0...
[ 17.598647] Driver 'sd' needs updating - please use bus_type methods
[ 17.602175] SCSI device sda: 398297088 512-byte hdwr sectors (203928 MB)
[ 17.602218] SCSI device sda: drive cache: write back
[ 17.604985] SCSI device sda: 398297088 512-byte hdwr sectors (203928 MB)
[ 17.604998] SCSI device sda: drive cache: write back
[ 17.605003] sda: sda1 sda2 < sda5 sda6 sda7 sda8 > sda3
[ 17.667971] sd 0:0:0:0: Attached scsi disk sda
[ 17.668025] SCSI device sdb: 398297088 512-byte hdwr sectors (203928 MB)
[ 17.672219] SCSI device sdb: drive cache: write back
[ 17.673450] SCSI device sdb: 398297088 512-byte hdwr sectors (203928 MB)
[ 17.674449] SCSI device sdb: drive cache: write back
[ 17.674453] sdb: sdb1
[ 17.696335] sd 1:0:0:0: Attached scsi disk sdb
[ 17.857827] hda: Maxtor 6L300R0, ATA DISK drive
[ 18.112745] hdb: IC35L090AVV207-0, ATA DISK drive
[ 18.167023] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 18.167433] Probing IDE interface ide1...
[ 18.839502] hdc: SONY DVD RW DRU-710A, ATAPI CD/DVD-ROM drive
[ 19.451759] ide1 at 0x170-0x177,0x376 on irq 15
[ 19.458511] hda: max request size: 1024KiB
[ 19.479097] hda: 586114704 sectors (300090 MB) w/16384KiB Cache, CHS=36483/255/63, UDMA(33)
[ 19.480653] hda: cache flushes supported
[ 19.480796] hda: hda1
[ 19.485675] hdb: max request size: 1024KiB
[ 19.493641] hdb: 160836480 sectors (82348 MB) w/1821KiB Cache, CHS=16383/255/63, UDMA(33)
[ 19.493821] hdb: cache flushes supported
[ 19.493893] hdb: hdb1
[ 19.509592] hdc: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
[ 19.509599] Uniform CD-ROM driver Revision: 3.20
[ 19.746839] usbcore: registered new driver usbfs
[ 19.747107] usbcore: registered new driver hub
[ 19.748909] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
[ 19.749763] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 21
[ 19.749769] GSI 17 sharing vector 0xB9 and IRQ 17
[ 19.749773] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUS0] -> GSI 21 (level, low) -> IRQ 185
[ 19.749870] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 19.749875] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 19.750789] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
[ 19.750800] ohci_hcd 0000:00:02.0: irq 185, io mem 0xfebfd000
[ 19.791712] ieee1394: Initialized config rom entry `ip1394'
[ 19.799908] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.48.
[ 19.804202] hub 1-0:1.0: USB hub found
[ 19.804213] hub 1-0:1.0: 4 ports detected
[ 19.905542] ACPI: PCI Interrupt Link [LUS1] enabled at IRQ 20
[ 19.905548] GSI 18 sharing vector 0xC1 and IRQ 18
[ 19.905553] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUS1] -> GSI 20 (level, low) -> IRQ 193
[ 19.905654] PCI: Setting latency timer of device 0000:00:02.1 to 64
[ 19.905659] ohci_hcd 0000:00:02.1: OHCI Host Controller
[ 19.905854] ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
[ 19.905865] ohci_hcd 0000:00:02.1: irq 193, io mem 0xfebfe000
[ 19.959246] hub 2-0:1.0: USB hub found
[ 19.959254] hub 2-0:1.0: 4 ports detected
[ 20.061578] ohci1394: $Rev: 1313 $ Ben Collins <bcollins@debian.org>
[ 20.061909] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 19
[ 20.061914] GSI 19 sharing vector 0xC9 and IRQ 19
[ 20.061919] ACPI: PCI Interrupt 0000:02:0b.0[A] -> Link [LNKB] -> GSI 19 (level, low) -> IRQ 201
[ 20.061924] PCI: Via IRQ fixup for 0000:02:0b.0, from 11 to 9
[ 20.089269] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 22
[ 20.089271] ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [LUS2] -> GSI 22 (level, low) -> IRQ 177
[ 20.089407] PCI: Setting latency timer of device 0000:00:02.2 to 64
[ 20.089412] ehci_hcd 0000:00:02.2: EHCI Host Controller
[ 20.089442] ehci_hcd 0000:00:02.2: debug port 1
[ 20.089445] PCI: cache line size of 64 is not supported by device 0000:00:02.2
[ 20.089643] ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 3
[ 20.089651] ehci_hcd 0000:00:02.2: irq 177, io mem 0xfebffc00
[ 20.089658] ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 20.089850] hub 3-0:1.0: USB hub found
[ 20.089857] hub 3-0:1.0: 8 ports detected
[ 20.114944] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[201] MMIO=[feaff800-feafffff] Max Packet=[2048]
[ 20.192077] ACPI: PCI Interrupt Link [LKLN] enabled at IRQ 21
[ 20.192082] ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [LKLN] -> GSI 21 (level, low) -> IRQ 185
[ 20.192088] PCI: Setting latency timer of device 0000:00:05.0 to 64
[ 20.370945] ohci_hcd 0000:00:02.1: wakeup
[ 20.647834] usb 2-4: new full speed USB device using ohci_hcd and address 2
[ 20.705076] eth0: forcedeth.c: subsystem: 01043:80a7 bound to 0000:00:05.0
[ 20.810910] usbcore: registered new driver hiddev
[ 20.822001] input: USB Audio as /class/input/input1
[ 20.822016] input: USB HID v1.00 Device [USB Audio] on usb-0000:00:02.1-4
[ 20.822026] usbcore: registered new driver usbhid
[ 20.822028] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[ 20.988770] Attempting manual resume
[ 21.011640] EXT3-fs: mounted filesystem with ordered data mode.
[ 21.026480] kjournald starting. Commit interval 5 seconds
[ 21.377762] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e0180000a8e603]
[ 25.459361] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 25.459384] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 27.023754] i2c_adapter i2c-0: nForce2 SMBus adapter at 0x5000
[ 27.023778] i2c_adapter i2c-1: nForce2 SMBus adapter at 0x5040
[ 27.251109] input: PC Speaker as /class/input/input2
[ 27.277757] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 27.366838] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 27.436659] input: PS2++ Logitech MX Mouse as /class/input/input3
[ 27.609349] Real Time Clock Driver v1.12
[ 27.872508] ts: Compaq touchscreen protocol output
[ 28.108250] FDC 0 is a post-1991 82077
[ 28.257198] ACPI: PCI Interrupt Link [LAUI] enabled at IRQ 20
[ 28.257203] ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [LAUI] -> GSI 20 (level, low) -> IRQ 193
[ 28.257355] PCI: Setting latency timer of device 0000:00:06.0 to 64
[ 28.568244] intel8x0_measure_ac97_clock: measured 50571 usecs
[ 28.568248] intel8x0: clocking to 46831
[ 28.781314] usbcore: registered new driver snd-usb-audio
[ 29.055348] nvidia: module license 'NVIDIA' taints kernel.
[ 29.061119] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 18
[ 29.061126] GSI 20 sharing vector 0xD1 and IRQ 20
[ 29.061131] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKE] -> GSI 18 (level, low) -> IRQ 209
[ 29.061352] NVRM: loading NVIDIA Linux x86_64 Kernel Module 1.0-8756 Wed Mar 29 15:12:41 PST 2006
[ 29.937567] lp: driver loaded but no devices found
[ 29.976592] sbp2: $Rev: 1306 $ Ben Collins <bcollins@debian.org>
[ 29.976596] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
[ 29.976598] ieee1394: sbp2: Try serialize_io=0 for better performance
[ 30.129624] Adding 979924k swap on /dev/sda7. Priority:-1 extents:1 across:979924k
[ 30.372706] EXT3 FS on sda3, internal journal
[ 30.664768] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[ 30.664772] md: bitmap version 4.39
[ 31.318812] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
[ 32.166767] cdrom: open failed.
[ 32.764328] kjournald starting. Commit interval 5 seconds
[ 32.764357] EXT3 FS on sda8, internal journal
[ 32.764362] EXT3-fs: mounted filesystem with ordered data mode.
[ 32.782467] kjournald starting. Commit interval 5 seconds
[ 32.782522] EXT3 FS on sda6, internal journal
[ 32.782525] EXT3-fs: mounted filesystem with ordered data mode.
[ 32.847108] NTFS driver 2.1.25 [Flags: R/O MODULE].
[ 32.888396] NTFS volume version 3.1.
[ 32.907078] NTFS volume version 3.1.
[ 32.938606] NTFS volume version 3.1.
[ 32.957874] NTFS volume version 3.1.
[ 34.233653] NET: Registered protocol family 10
[ 34.233760] lo: Disabled Privacy Extensions
[ 34.234107] IPv6 over IPv4 tunneling driver
[ 36.521481] ACPI: Power Button (FF) [PWRF]
[ 36.521502] ACPI: Power Button (CM) [PWRB]
[ 36.591570] ibm_acpi: ec object not found
[ 36.606999] pcc_acpi: loading...
[ 37.091765] powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.50.4)
[ 37.094381] powernow-k8: 0 : fid 0x2 (1000 MHz), vid 0x12 (1100 mV)
[ 37.094384] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0xa (1300 mV)
[ 37.094386] powernow-k8: 2 : fid 0xc (2000 MHz), vid 0x6 (1400 mV)
[ 37.094388] powernow-k8: 3 : fid 0xe (2200 MHz), vid 0x2 (1500 mV)
[ 37.094392] cpu_init done, current fid 0xe, vid 0x2
[ 40.720108] ppdev: user-space parallel port driver
[ 42.453025] Bluetooth: Core ver 2.8
[ 42.453030] NET: Registered protocol family 31
[ 42.453031] Bluetooth: HCI device and connection manager initialized
[ 42.453041] Bluetooth: HCI socket layer initialized
[ 42.489913] Bluetooth: L2CAP ver 2.8
[ 42.489917] Bluetooth: L2CAP socket layer initialized
[ 42.492639] Bluetooth: RFCOMM socket layer initialized
[ 42.492661] Bluetooth: RFCOMM TTY layer initialized
[ 42.492662] Bluetooth: RFCOMM ver 1.7
[ 44.726947] eth0: no IPv6 routers present
[ 44.917687] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
[ 44.917907] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
[ 44.918066] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
[ 190.900689] Machine check events logged
[ 341.759800] Machine check events logged
[ 358.492384] usb 2-4: USB disconnect, address 2
[ 361.748583] ohci_hcd 0000:00:02.1: wakeup
[ 361.874438] usb 2-4: new full speed USB device using ohci_hcd and address 3
[ 362.143487] input: USB Audio as /class/input/input4
[ 362.143503] input: USB HID v1.00 Device [USB Audio] on usb-0000:00:02.1-4
[ 479.976460] Machine check events logged
Codice: Seleziona tutto
0000:00:00.0 Host bridge: nVidia Corporation nForce3 250Gb Host Bridge (rev a1)
Subsystem: ASUSTeK Computer Inc.: Unknown device 813f
Flags: bus master, 66MHz, fast devsel, latency 0
Memory at f0000000 (32-bit, prefetchable) [size=128M]
Capabilities: <available only to root>
0000:00:01.0 ISA bridge: nVidia Corporation nForce3 250Gb LPC Bridge (rev a2)
Subsystem: ASUSTeK Computer Inc.: Unknown device 813f
Flags: bus master, 66MHz, fast devsel, latency 0
0000:00:01.1 SMBus: nVidia Corporation nForce 250Gb PCI System Management (rev a1)
Subsystem: ASUSTeK Computer Inc.: Unknown device 813f
Flags: 66MHz, fast devsel
I/O ports at 5080 [size=32]
I/O ports at 5000 [size=64]
I/O ports at 5040 [size=64]
Capabilities: <available only to root>
0000:00:02.0 USB Controller: nVidia Corporation CK8S USB Controller (rev a1) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc.: Unknown device 813f
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 185
Memory at febfd000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <available only to root>
0000:00:02.1 USB Controller: nVidia Corporation CK8S USB Controller (rev a1) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc.: Unknown device 813f
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 193
Memory at febfe000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <available only to root>
0000:00:02.2 USB Controller: nVidia Corporation nForce3 EHCI USB 2.0 Controller (rev a2) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc.: Unknown device 813f
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 177
Memory at febffc00 (32-bit, non-prefetchable) [size=256]
Capabilities: <available only to root>
0000:00:05.0 Bridge: nVidia Corporation CK8S Ethernet Controller (rev a2)
Subsystem: ASUSTeK Computer Inc.: Unknown device 80a7
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 185
Memory at febfc000 (32-bit, non-prefetchable) [size=4K]
I/O ports at ec00 [size=8]
Capabilities: <available only to root>
0000:00:06.0 Multimedia audio controller: nVidia Corporation nForce3 250Gb AC'97 Audio Controller (rev a1)
Subsystem: ASUSTeK Computer Inc.: Unknown device 812a
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 193
I/O ports at e800 [size=256]
I/O ports at e400 [size=128]
Memory at febfb000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <available only to root>
0000:00:08.0 IDE interface: nVidia Corporation CK8S Parallel ATA Controller (v2.5) (rev a2) (prog-if 8a [Master SecP PriP])
Subsystem: ASUSTeK Computer Inc.: Unknown device 813f
Flags: bus master, 66MHz, fast devsel, latency 0
I/O ports at ffa0 [size=16]
Capabilities: <available only to root>
0000:00:0a.0 IDE interface: nVidia Corporation CK8S Serial ATA Controller (v2.5) (rev a2) (prog-if 85 [Master SecO PriO])
Subsystem: ASUSTeK Computer Inc.: Unknown device 813f
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 177
I/O ports at 09f0 [size=8]
I/O ports at 0bf0 [size=4]
I/O ports at 0970 [size=8]
I/O ports at 0b70 [size=4]
I/O ports at c800 [size=16]
I/O ports at c400 [size=128]
Capabilities: <available only to root>
0000:00:0b.0 PCI bridge: nVidia Corporation nForce3 250Gb AGP Host to PCI Bridge (rev a2) (prog-if 00 [Normal decode])
Flags: bus master, 66MHz, medium devsel, latency 16
Bus: primary=00, secondary=01, subordinate=01, sec-latency=10
Memory behind bridge: fa900000-fe9fffff
Prefetchable memory behind bridge: ca800000-ea7fffff
0000:00:0e.0 PCI bridge: nVidia Corporation nForce3 250Gb PCI-to-PCI Bridge (rev a2) (prog-if 00 [Normal decode])
Flags: bus master, 66MHz, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=128
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: fea00000-feafffff
0000:00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
Flags: fast devsel
Capabilities: <available only to root>
0000:00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
Flags: fast devsel
0000:00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
Flags: fast devsel
0000:00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
Flags: fast devsel
0000:01:00.0 VGA compatible controller: nVidia Corporation NV40 [GeForce 6800 GT] (rev a1) (prog-if 00 [VGA])
Subsystem: LeadTek Research Inc.: Unknown device 2996
Flags: bus master, 66MHz, medium devsel, latency 248, IRQ 209
Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
Memory at d0000000 (32-bit, prefetchable) [size=256M]
Memory at fc000000 (32-bit, non-prefetchable) [size=16M]
Expansion ROM at fe9e0000 [disabled] [size=128K]
Capabilities: <available only to root>
0000:02:0b.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 80) (prog-if 10 [OHCI])
Subsystem: Unknown device 7fc8:d008
Flags: bus master, medium devsel, latency 64, IRQ 201
Memory at feaff800 (32-bit, non-prefetchable) [size=2K]
I/O ports at bc00 [size=128]
Capabilities: <available only to root>
a risolverla...Codice: Seleziona tutto
sudo modprobe nome_moduloVisualizzano questa sezione: 0 utenti iscritti e 1 ospite